Stream-dominated alluvial fan and lacustrine depositional systems in Cenozoic strike-slip basins, Denali fault system, Yukon Territory, Canada

Ancient stream-dominated (‘wet’) alluvial fan deposits have received far less attention in the literature than their arid/semi-arid counterparts. The Cenozoic basin fills along the Denali fault system of the northwestern Canadian Cordillera provide excellent examples of stream-dominated alluvial fan deposits because they developed during the Eocene-Oligocene temperate climatic regime in an active strike-slip orogen. The Amphitheatre Formation filled several strike-slip basins in Yukon Territory and consists of up to 1200 m of coarse siliciclastic rocks and coal. Detailed facies analysis, conglomerate: sandstone percentages (C:S), maximum particle size (MPS) distribution, and palaeocurrent analysis of the Amphitheatre Formation in two of these strike-slip basins document the transition from proximal, to middle, to distal and fringing environments within ancient stream-dominated alluvial-fan systems. Proximal fan deposits in the Bates Lake Basin are characterized by disorganized, clast-supported, boulder conglomerate and minor matrix(mud)-supported conglomerate. Proximal facies are located along the faulted basin margins in areas where C:S = 80 to 100 and where the average MPS ranges from 30 to 60 cm. Proximal fan deposits grade into middle fan, channelized, well organized cobble conglomerates that form upward fining sequences, with an average thickness of 7 m. Middle fan deposits grade basinward into well-sorted, laterally continuous beds of normally graded sandstone interbedded with trough cross-stratified sandstone. These distal fan deposits are characteristic of areas where C:S = 20 to 40 and where the average MPS ranges from 5 to 15 cm. Fan fringe deposits consist of lacustrine and axial fluvial facies. Palaeogeographic reconstruction of the Bates Lake Basin indicates that alluvial-fan sedimentation was concentrated in three parts of the basin. The largest alluvial-fan system abutted the strike-slip Duke River fault, and prograded westward across the axis of the basin. Two smaller, coarser grained fans prograded syntaxially northward from the normal-faulted southern basin margin. Facies analysis of the Burwash Basin indicates a similar transition from proximal to distal, stream-dominated alluvial fan environments, but with several key differences. Middle-fan deposits in the Burwash Basin define upward coarsening sequences 50 to 60 m thick composed of fine-grained lithofacies and coal in the lower part, trough cross-stratified sandstone in the middle, and conglomerate in the upper part of the sequence. Upward-coarsening sequences, 90–140 m thick, also are common in the fan fringe lacustrine deposits. These sequences coarsen upward from mudstone, through fine grained, ripple-laminated sandstone, to coarse grained trough cross-stratified sandstone. The upward-coarsening sequences are basinwide, facies independent, and probably represent progradation of stream-dominated alluvial-fan depositional systems. Coal distribution in the Amphitheatre Formation is closely coupled with predominant depositional processes on stream-dominated alluvial fans. The thickest coal seams occur in the most proximal part of the basin fill and in marginal lacustrine deposits. Coal development in the intervening middle and distal fan areas was suppressed by the high frequency of unconfined flow events and lateral channel mobility.     

Terrestrial-marine transition in the Cambrian rocks of Kangaroo Island, South Australia

The upper part of the Lower Cambrian succession in northeast Kangaroo Island comprises three interbedded facies associations. The fine-grained association is composed of siltstone, mudstone and minor sandstone. It contains flat lamination and abundant ripple cross-lamination which shows bipolar palaeocurrents, and occurs in combinations of flaser bedding, lenticular bedding and wavy lamination. Although body fossils are relatively rare, trilobite traces and desiccation cracks are common, and the association is interpreted as a predominantly subtidal to intertidal deposit. The conglomerate facies association contains horizontally bedded cobble to boulder conglomerate, with subordinate trough cross-stratified coarse sandstone to granule/pebble conglomerate. Fabrics and structures in the coarse conglomerates are consistent with alluvial transport (stream and debris flow), but not beach deposition. The conglomerate association is attributed to tectonic uplift and erosion of a Precambrian-Lower Cambrian succession developed adjacent to the present north coast of Kangaroo Island. Southward progradation of an alluvial fan complex occurred across east-west oriented tidal flats on which limited wave activity reworked sand and fine gravel, but not coarser material. The sandstone facies association mainly comprises trough cross-stratified and plane-laminated sandstone, the latter with current lineation predominantly sub-parallel to the east-west shoreline. Trough cross-stratification is ascribed to onshore waves and longshore currents, and current lineation to predominantly shore-parallel tidal currents, augmented by longshore drift and storm surge. Tectonic movements gave rise to cycles of transgression and regression as tidal and alluvial processes dominated alternately.     

Source-controlled carbonates in a small Eocene half-graben lake basin (Shulu Sag) in central Hebei Province, North China

Carbonate deposits, which unconformably overlie the Palaeozoic bedrocks, extensively occur in the base of the Tertiary lake succession in the half‐graben Shulu Sag, central Hebei Province, North China. This study focuses on the basal carbonate successions on the hinged western slope. Based on seismic, borehole and core data, nine facies are identified in the carbonate successions, and are further grouped into five facies associations: mid‐proximal alluvial fan, distal alluvial fan, fan fringe, moderately deep lake and deep lake. The first two facies associations constitute alluvial fans formed by debrisflows at the edge of lake and are dominated by mounded‐ to lobate‐shaped, matrix‐ to clast‐supported carbonate rudstones with minor calcretes in the lowermost rudstone units and basinward increase in interfingering with lacustrine carbonate facies. The fan fringe, moderately deep lake and deep lake associations are dominated by pebbly carbonate arenites (or rare carbonate arenites), calcisiltite‐calcilutites, and varve‐like calcilutites, calcareous shales and oil shales, respectively. Widespread occurrences of fine‐grained limestone packages containing varve‐like organic‐rich laminations, minor authigenic glauconite and pyrite, and planktonic and plant fossils suggest a meromictic, anoxic deep lake under a semi‐humid to humid climate, probably with a connection to marine basins. Similarities in lithology and fossil assemblages (e.g. trilobites) of lithoclasts with those of the Mid‐Upper Cambro‐Ordovician bedrock carbonates suggest that the clastic and dissolved carbonate loads were sourced from this Lower Palaeozoic catchment, and shed off the surrounding highlands into the basin. These carbonate facies associations represent the lake lowstand and transgressive deposits of the basal third‐order sequence (Ia) in which the highstand deposits are composed of lacustrine siliciclastics. During the lake lowstand stage (or initiation of basin‐filling) under an intermediate climate, carbonate alluvial fans occurred mostly subaerially at the bottom of the hinged slope with a narrow, shallow lake zone basinwards, and locally were perched within the palaeovalley on the mid‐upper slope. During the transgressive (deepening) stage under a semi‐humid to humid climate, carbonate alluvial fans became smaller in size and episodically stepped backwards upon the slope, with greatly expanded and deepened lake. Nevertheless, the carbonate system was switched to an exclusively siliciclastic system during the highstand stage. The exhumation and erosion of the Mid‐Lower Cambrian bedrock dominated by siliciclastics was probably the cause due to further uplift of the drainage basin. All these facts indicate that the carbonate deposition in the Shulu Sag was mostly controlled by the interactions of tectonics, climate and provenance.     

Submarine fan facies of the Upper Cretaceous Great Valley sequence,northern and central California

The Upper Cretaceous part of the Great Valley Sequence provides a unique opportunity to study deep-marine sedimentation within an arc-trench gap. Facies analysis delineates submarine fan facies similar to those described from other ancient basins. Fan models and facies of Mutti and Ricci-Lucchi allow reconstruction of the following depositional environments: basin plain, outer fan, midfan, inner fan, and slope. Basin plain deposits are characterized by hemipelagic mudstone with randomly interbedded thin sandstone beds exhibiting distal turbidite characteristics. Outer fan deposits are characterized by regularly interbedded sandstone and mudstone, and commonly exhibit thickening-upward (negative) cycles that constitute depositional lobes. The sandstone occurs as proximal to distal turbidites without channeling. Midfan deposits are characterized by the predominance of coarse-grained, thick, channelized sandstone beds that commonly are amalgamated. Thinning-upward (positive) cycles and braided channelization also are common. Inner fan deposits are characterized by major channel-fill complexes (conglomerate, pebbly sandstone, and pebbly mudstone) enclosed in mudstone and siltstone. Positive cycles occur within these channel-fill complexes. Much of the fine-grained material consists of levee (overbank) deposits that are characterized by rhythmically interbedded thin mudstone and irregular sandstone beds with climbing and starved ripples. Slope deposits are characterized by mudstone with little interbedded sandstone; slumping and contortion of bedding is common. Progressions of fan facies associations can be described as retrogradational and progradational suites that correspond, respectively, to onlapping and offlapping relations in the basin. The paleoenvironments, fan facies associations, and tectonic setting of the Late Cretaceous fore-arc basin are similar to those of modern arc—trench systems.     

An allostratigraphic approach to a non-marine basin: the north-western part of Cretaceous Kyongsang Basin, SE Korea

The north-western part of the Cretaceous Kyongsang Basin, south-east Korea, comprises alluvial deposits of conglomerate, gravelly sandstone, sandstone and mudstone which can be grouped into four allomembers bounded by stratigraphic discontinuities. The discontinuities trend NW–SE and are marked by distinct facies transitions, abrupt emplacement of conglomerate and thin but persistent mudstone beds. Sedimentary facies and architectural analyses reveal that each allomember formed a depositional system of fluvial channel networks draining toward the south-east with alluvial fans on the northern margin. Each allomember can be characterized by distinctive architecture of channel-fills, clast composition of conglomerate and sandstone/mudstone ratio. Successive units show an eastward shift in the locus of deposition, suggesting basinward relocations of alluvial systems. Such variations with time and space are interpreted to reflect changes in accommodation space and sediment supply during basin evolution, probably caused by fault movements. This study shows that detailed mapping, combined with architectural analysis, and the establishment of alluvial allostratigraphy can help assess changes in alluvial systems and structural development of the basin.     

内蒙古西胡里吐盆地下白垩统大磨拐河组沉积相及砂岩型铀矿成矿作用

西胡里吐盆地是一个早白垩世断陷盆地，盆地盖层由下白垩统大磨拐河组构成。受同沉积断裂作用的影响，盆地的古地理格局总体为南陡北缓，南部主要发育冲积扇相、扇三角洲相，盆地北部以河流相、三角洲相为主，仅上部层位发育冲积扇相，而盆地中部的广大区域则以巨厚的湖泊相沉积占优势。大磨拐河组可进一步划分为三个岩性段。第一段形成于盆地断陷发育的初始阶段，以冲积扇、河流、三角洲发育为特征；第二段形成于湖泊迅速扩张至最大时期，沉积了一套巨厚的湖相泥岩，构成盆地盖层的主体，在晚期有河流、三角洲等粗碎屑沉积；第三段以冲积扇的极大发育为特征，代表盆地进入萎缩阶段。三个段总体表现为一段、三段岩性粗、煤层少且薄，二段岩性细、泥岩厚、煤层发育多。从第一段到第三段，基本构成了盆地一次完整的沉积充填历史。主要含矿层位大磨拐河组的沉积特点不仅控制着盆地内铀矿化的空间展布，而且也控制着本区的铀矿化类型。“粗～细～粗”的地层结构特点决定了本区的铀成矿作用主要发生于湖泊最大扩张的上部地层，即第二段上部及第三段的粗碎屑沉积物中，主要矿化层位为该套地层内的冲积扇、辫状河与三角洲相沉积，含矿岩石主要为渗透性好、富含有机质的砂砾岩、砂岩；同时由于上部含矿层位具有“砂多泥少”的特点，决定了本区铀矿化类型主要为具垂直分带的潜水氧化带型，仅局部存在潜水转层间氧化带型。     

Sedimentology of an ancient erg margin: the Lower Jurassic Aztec Sandstone, southern Nevada and southern California

The Lower Jurassic Aztec Sandstone is an aeolian-deposited quartzose sandstone that represents the western margin of the southerly-migrating Navajo-Nugget sand sea (or erg). Vertical and lateral facies relations suggest that the erg margin encroached upon volcanic highlands, alluvial fan, wadi and sabkha environments. In southern Nevada, 700 m thick facies successions record the arrival of the Aztec sand sea. Initial erg sedimentation in the Valley of Fire consists of lenticular or tongue-shaped aeolian sand bodies interstratified with fluvially-deposited coarse sandstone and mudstone. Above, evaporite-rich fine sandstone and mudstone are overlain by thick, cross-stratified aeolian sandstone that shows an upsection increase in set thickness. The lithofacies succession represents aeolian sand sheets and small dunes that migrated over a siliciclastic sabkha traversed by ephemeral wadis. These deposits were ultimately buried by large dunes and draas of the erg. In the Spring Mountains, a similar facies succession also contains thin, lenticular volcaniclastic conglomerate and sandstone. These sediments represent the distal margin of an alluvial fan complex sourced from the west. Thin aeolian sequences are interbedded with volcanic flow rocks, ash-flow tuffs, debris flows, and fluvial deposits in the Mojave Desert of southern California. These aeolian strata represent erg migration up the eastern flanks of a magmatic arc. The westward diminution of aeolian-deposited units may reflect incomplete erg migration, thin accumulation of aeolian sediment succeptible to erosion, and stratigraphic dilution by arc-derived sediment. A two-part division of the Aztec erg is suggested by lithofacies associations, the size and geometry of aeolian cross-strata, and sediment dispersal data. The leading or downwind margin of the erg, here termed the fore-erg, is represented by a 10–100 m thick succession of isolated pods, lenses, and tongues of aeolian-deposited sediment encased in fluvial and sabkha deposits. Continued sand-sea migration brought large dunes and draas of the erg interior into the study area; these 150–500 m thick central-erg sediments buried the fore-erg deposits. The trailing, upwind margin of the erg is represented by back-erg deposits in northern Utah and Wyoming.     

An unusual fluvial to tidal transition in the mesoarchean Moodies Group, South Africa: A response to high tidal range and active tectonics

The Moodies Group in the Dycedale Syncline, Barberton Greenstone Belt consists of a 100–130 m-thick upward-fining succession that exhibits a transition from fluvial to tide-modified sedimentation. A basal, 10–30 m-thick conglomerate–sandstone interval of alluvial origin is overlain by stacked upward-fining, decimeter- to meter-scale cycles within which three facies are recognized: 1) conglomerate lag; 2) cross-bedded sandstone; and 3) interlaminated sandstone–siltstone and mudstone. Within the cycles, the abundance of mudstone drapes increases upwards. Structureless conglomerates and cross-beds lacking mudstone drapes record braided-alluvial processes. In contrast, cross-beds with mudstone drapes and interlaminated sandstone–siltstone and mudstone are products of flows modified by various tidal beats. Sand and/or silt transport took place during the ebb and flood stages and mudstone accumulated during slack water phases. Alternating thick–thin laminations reflect dominant and subordinate, twice-daily tides. Thicker groupings of foresets and thicker intervals of vertically stacked sandstone–siltstone and mudstone laminations are interpreted as spring tide deposits whereas thinner groupings of foresets and thinner laminations record neap tides. Desiccated mudstone drapes on foresets indicate that bedforms rarely were locally exposed during some portion of the tidal cycle. Abundant exposure structures in the interlaminated sandstone–siltstone and mudstone facies indicate that the cycles are upward shoaling. The stacked upward-fining cycles are attributed to alternating subaerial exposure and fluvial influx followed by marine inundation, probably related to absolute sea level fluctuations. Lack of high-order vegetation on the Archean landscape promoted rapid lateral migration or avulsion of tidally influenced fluvial channels.

The association of facies within the 100–130 m-thick upward-fining succession is comparable to Holocene and ancient paleovalley fills characterized by basal alluvial gradational upwards into estuarine facies. However, in the absence of vegetation, the land–ocean interface in the Archean probably consisted of laterally extensive fan or braid deltas rather than point sources of sediment characteristic of most modern rivers. The abrupt up-section change from syntectonic, high-energy, alluvial–fluvial flash flood deposits to tide-influenced sedimentation implies a proximal source that provided sediment to a shoreline influenced by strong tidal action. Possible Holocene analogues are orogenic settings such as the Canterbury Plains of New Zealand, the Indo-Gangetic Plains of India and strike-slip settings such as the Gulf of Aqaba but all three examples lack a direct transition to tidally influenced sedimentation.     

Paleoenvironment of deposition of the Dupi Tila Formation,Lalmai Hills,Comilla, Bangladesh

The Dupi Tila Formation is composed of yellow to light brown medium to very fine moderately hard to loose sandstone, siltstone, silty clay, mudstone and shale with some conglomerates with clasts of petrified wood. The lithofacies of matrix supported conglomerate, trough cross bedded conglomerate, massive sandstone, trough cross bedded sandstone, planar cross bedded sandstone, ripple cross laminated sandstone-siltstone, flaser laminated sandstone-shale, lenticular laminated sandstone-siltstone-shale, parallel laminated sandstone-siltstone, wavy laminated shale, parallel laminated blue shale, and mudstone are delineated within this formation. Based on the grain size, sedimentary structures, water depth and genesis of individual facies, facies are grouped into three types of facies associations like (i) coarse-grained conglomerate facies association in relation to tractive current deposits of alluvial fan set up at the base of litho-succession (FAC), (ii) medium to fine-grained sandstone-siltstone-mudstone facies association or facies association in relation to strong tide (FAT) characterizing the middle part of litho-succession, (iii) very fine-grained sandstone-siltstone-mudstone facies association in relation to less frequent weak tide or heterolithic facies association (FAHL) characterizing upper part of litho-succession and shallow marine facies association (FASM) composing the uppermost litho-succession. Presence of gluconite indicates that the depositional environment was shallow to deep marine. The dominant paleoflow direction during the deposition of Dupi Tila Formation was toward southeast to southwestern direction. The rivers were of braided type at the piedmont alluvial depositional set up at the lower part, which later changed to estuarine-tidal flat type environmental set up in the middle part to upper part and paleo-environment was shallow marine in the uppermost part.     

广西横县六景古近纪冲积物研究

广西横县六景火车站南侧,角度不整合覆盖下泥盆统莫丁组和那叫组下段,被新近系大面积覆盖而呈两部分远距离割裂状态的一套“二元结构”特征显著的红色泥砂基底碳酸盐岩粗巨砾岩及其横向相变部分,长期以来未被将其作为一个冲积扇的有机统一体进行研究。经笔者两次实地踏勘,系统采样和分析,以现代山麓冲积扇鉴别特征为主,辅以古冲积扇特征,综合分析认为该套沉积系列相关分割露头分别为一古近系冲积扇所残存扇根、扇中和扇缘。该冲积扇为一典型的古近纪早期干旱气候条件下,母岩区为陡峻碳酸盐岩山体的古山麓冲积扇。     

The Maesan fan delta, Miocene Pohang Basin, SE Korea: architecture and depositional processes of a high-gradient fan-delta-fed slope system

The Maesan fan-delta-fed slope system in the Miocene Pohang Basin occurs between two Gilbert-type fan deltas. Detailed analysis of sedimentary facies and bed geometry reveals that the sequence is represented by 13 sedimentary facies. These facies can be organized into three facies associations, representing distinct depositional environments: alluvial fan (facies association I), steep-faced slope (facies association II), and basin plain (facies association III). Subaerial debris flows and dense, inertia-dominated currents were transformed into subaqueous sediment gravity flows in steep-faced slope environments. Further downslope, these flows were channelized and formed lobate conglomerate and sandstone bodies at the terminal edge of the channels (or chutes). Interchannel and interlobe areas were dominated by homogeneous mudstone and muddy sandstone, deposited by suspension settling of fine-grained materials. Part of the steep-faced slope deposits experienced large-scale slides and slumps. The chutes/channels, lobes and splays on the steep-faced slope of the Maesan system are similar to those in modern subaqueous coarse-grained fan-delta systems.     

The Cretaceous Uhangri Formation, SW Korea: lacustrine margin facies

The Uhangri Formation forms part of the Cretaceous sedimentary sequence deposited in a series of inland basins in the south-western Korean Peninsula. It comprises an approximately 400-m-thick epiclastic sequence of conglomerate, (gravelly) sandstone, cherty mudstone and black shale. The entire sequence can be represented by 16 distinctive sedimentary facies organized into four facies associations. Facies association I is characterized by thick homogeneous brownish siltstone, wedge-shaped disorganized conglomerate and thinly interlayered gravelly sandstone units. The siltstone units were formed by large floods submerging the alluvial fan fringe (floodplain), whereas the conglomerate and gravelly sandstone units were deposited by sheetfloods and debris flows. Facies association II consists of stratified conglomerate — gravelly sandstone, laminated sandstone and sandstone/siltstone couplets which form fining-upward cycles. Some facies units are low-angle trough cross-bedded and show broad channel geometries. This association represents subaqueous delta lobes fed by high- and low-concentration turbidity currents in the distal delta realm. Facies association III is characterized, by wedged conglomerate and gravelly sandstone facies with interfingered massive sandstone bounded by scoured bases. It represents a delta front where distributary channels and mouth bars are dominant. Facies association IV consists of laterally continuous sequence of laminated black shale, crudely stratified sandstone and convoluted sandstone/cherty mudstone. This facies association is suggestive of depositional processes controlled by chemical equilibrium resulting from an interaction between density inflows and lake water. The cherty mudstone resulted from inorganic precipitation from siliceous solution provided by acidic volcanism. The Uhangri sequence generally shows a fining-upward trend with a transition from alluvial fan fringe, coarse-grained subaqueous delta, to shallow lake. The retrogradation was probably due to continuous subsidence related to continental rifting in the oblique-slip mobile zone.     

Cambrian- Ordovician Deep - Water Deposits in Southwest Jiangxi, China

The Cambrian-Ordovician rocks in southwestern Jiangxi are mainly composed of deep-water deposits, in which 5 facies have been recognized: sandstone facies, sandstone-mudstone facies, siltstone-mudstone facies, mudstone (slate)facies, and chert facies. They are of turbidity current origin and are related to pelagic and hemipelagic deposits. In the light of facies distribution, the Cambrian-Ordovician deposits can be classified into 3 facies associations formed in middle fan, outer fan and deep-sea plain environments respectively. The 3 different orders of vertical cycles in the stratigraphic sequence are considered to be controlled by factors such as sea-level fluctuation, basin subsidence and submarine fan progradation. The tectonic setting of the sedimentary basin is interpreted as passive continental margin based on the chemical composition analysis of the sandstone.     

Sedimentology and tectonic implications of Cretaceous fan-delta conglomerates, Queen Charlotte Islands, Canada

The Honna Formation, of Coniacian age, consists of several hundred metres of polymictic clast-supported conglomerate associated with sandstone and mudstone. Five conglomerate facies are recognized: ungraded beds; inverse graded beds; normal graded beds; inverse-to-normal graded beds; and parallel-stratified beds. These facies are interpreted as the deposits of subaqueous cohesionless debris flows and/or high-density turbidity currents. The depositional environment was a deep-water, gravelly fan that draped a fault-controlled, basin-margin slope. The fan is inferred to have passed upslope directly into an alluvial fan (unpreserved); hence, the name fan delta can be applied to the overall depositional system. This type of fan delta, of which the Brae oilfield in the North Sea is an example, is defined here as a deep-water fan delta. The lack of a shelf is in marked contrast to other types of fan delta. Three facies associations are recognized in the Honna Formation: subaqueous proximal-fan conglomerates, distal-fan turbiditic sandstones, and pro-fan/interfan mudstones with thin sandy turbidites. The proximal fan is envisaged as an unchannelled gravel belt with a downslope length of at least 20 km; such a long subaqueous gravel belt lacks a known modern analogue. The distal fan was an unchannelled sandy extension of the proximal gravel belt. It is postulated that the Honna Formation accumulated in a foreland basin which migrated westwards from the Coast Mountains where the Wrangellia-Alexander terrane was colliding with North America. In this model, the Honna fan delta was sourced by a (west-verging) thrust sheet whose sole-thrust was the Sandspit Fault immediately to the east. Deep-water fan deltas appear to develop preferentially when eustatic sea-level is relatively high, so that the‘feeder’ alluvial fan is small, and gravelly throughout. In petroleum exploration and field development, care should be taken to distinguish deep-water fan deltas from base-of-slope (canyon-fed) submarine fans, because the two systems differ significantly in terms of coarse-sediment distribution.     

龙川江盆地沉积演化与团田矿区铀储层配置

在构造-沉积-成矿背景、铀源地质体配置研究的基础上,选择滇西腾冲地块龙川江盆地南部团田地区老矿床外围部署验证工程,获得了重要找矿发现.本文以第一手钻探资料为素材,通过分析上新世龙川江盆地演化过程,建立含矿层系芒棒组的沉积体系和圈定有利赋矿微相组合,重建赋矿古冲积扇体的岩相古地理格局,为该地区和同类盆地砂岩型铀矿勘查提供...     

A Periglacial Palaeoenvionment in the Upper Carboniferous–Lower Permian Tobra Formation of the Salt Range, Pakistan

The Upper Carboniferous—Lower Permian(Upper Pennsylvanian-Asselian) Tobra Formation is exposed in the Salt and Trans Indus ranges of Pakistan.The formation exhibits an alluvial plain(alluvial fan-piedmont alluvial plain) facies association in the Salt Range and Khisor Range.In addition,a stream flow facies association is restricted to the eastern Salt Range.The alluvial plain facies association is comprised of clast-supported massive conglomerate(Gmc),diamictite(Dm)facies,and massive sandstone(Sm) Hthofacies whereas the stream flow-dominated alluvial plain facies association includes fine-grained sandstone and siltstone(Fss),fining upwards pebbly sandstone(Sf),and massive mudstone(Fm) Hthofacies.The lack of glacial signatures(particularly glacial grooves and striatums) in the deposits in the Tobra Formation,which are,in contrast,present in their timeequivalent and palaeogeographically nearby strata of the Arabian peninsula,e.g.the AI Khlata Formation of Oman and Unayzah B member of the Saudi Arabia,suggests a pro-to periglacial,i.e.glaciofluvial depositional setting for the Tobra Formation.The sedimentology of the Tobra Formation attests that the Salt Range,Pakistan,occupied a palaeogeographic position just beyond the maximum glacial extent during Upper Pennsylvanian-Asselian time.     

柴达木盆地一里坪地区新近系沉积相初探

在对柴达木盆地一里坪地区区域地质背景分析的基础上,根据录井岩屑描述、测井相分析和岩心观察,确定该区新近系发育冲积扇、河流-泛滥平原、扇三角洲、三角洲、湖泊等沉积相。应用录井和测井资料,编制出了地层厚度、砂岩含量、暗色泥岩含量、红色泥岩含量等值线图等基础图件。在此基础上编制出了上干柴沟组-狮子沟组4幅沉积相平面图。沉积相总体特征以滨浅湖沉积为主,而在研究区周缘则多发育河流泛滥平原、三角洲和扇三角洲沉积。这些图件动态地反映出沉积、沉降中心由西向东逐步迁移的过程。鸭参3井和落参1井区长期发育三角洲沉积,是研究区储集层发育最好的区块,也是下步勘探的重点地区。该研究对沉积相的精细研究具有一定的指导意义,对研究区的油气勘探也具有一定的参考意义。     

Ancient sand-rich submarine fans: depositional systems, models, identification, and analysis

Sand-rich submarine fans are radial or curved in plan view depending on the slope of the basin floor. They occur isolated or in coalescing systems. The fans' average lateral extent measures close to 25 km and their thickness usually less than 300 m. The thickness of outer fan sequences averages around 120 m and that of middle fan successions around 160 m. Rarely reported inner fan sequences have a maximum thickness of 80 m.

The formation of sand-rich fans is closely related to tectonic activity. Their sediment is coarse-grained and compositionally immature as indicated by significant feldspar content due to close provenance and rapid transport by short rivers with a steep gradient controlled by tectonism. Tectonic activity also provides for narrow shelves making the fans relatively insensitive to sealevel changes. Formation of sand-rich fans typically occurs in restricted continental basins. The tectonic settings are highly variable. Sand-rich fans typically receive their sediment through submarine canyons which intercept sand from longshore drift and/or are fed more or less directly by regional rivers.

The type of ancient fan system (radial, curved, isolated, coalescing) may be identified through paleocurrent map plots, facies map sketches, recognition of lateral thickness variations and sediment influx centers, as well as lateral bed correlations defining the minimum fan extent.

Important in distinguishing different environments of ancient fans are detailed measured sections, their comparison and correlation. Channelized inner fan and middle fan deposits may be distinguished from the unchannelized outer fan successions through bed correlation tests which reflect their different stratigraphic architectures and bedding patterns. Bedding in outer fan deposits (lobes) is relatively simple, parallel, and regular. The lateral bed continuity is relatively high. Channel fills, especially those of middle fan distributary channels, display a complicated bedding pattern with vertical and lateral random distribution of channel fills, axial erosion, and bed convergence towards the channel margins. Channel fills exhibit only linear bed continuity. Thus, the probability in carrying out local to regional scale lateral bed correlations is almost exclusively limited to outer fan deposits.

The measured sections will help further distinguish fan environments by revealing: (1) different facies associations in outer fan sequences (mainly B, C and D) and middle fan successions (mainly A, B, C, D, and channel margin facies); (2) greater average bed and layer thicknesses in middle fan as opposed to outer fan successions (“bed” and “layer” as used herein); (3) more frequent amalgamation surfaces in channel fills than in unchannelized outer fan deposits; (4) more frequent tabular amalgamation surfaces in outer fan sections; (5) more frequent nontabular amalgamation surfaces in channel fills; and (6) more frequent dish structures in middle fan than outer fan successions.

Rarely exposed fan valley fills may be identified by coarse conglomerates. Moreover, in proximity to fan valley fills, relatively mud-rich sediments may be observed that derive from the depositional system of the basin slope.     

Sedimentary Response of Different Fan Types to the Paleogene–Neogene Basin Transformation in the Kuqa Depression, Tarim Basin, Xinjiang Province

A group of alluvial fans formed in the early Paleogene represent marginal sedimentary facies at the foot of the South Tianshan Mountain, Kuqa Depression, Tarim Basin, Xinjiang province. Two types of fans occurred in the middle–late Paleogene Kumugeliemu and Suweiyi formations: one alluvial, and the other fan delta deposited in a lacustrine setting. Within the early Neogene Jidike Formation, coastal subaqueous fans developed, probably in a deeper water lacustrine setting. The three types of fans are stacked vertically in outcrop with the sequence in ascending order: bottom alluvial, middle fan-delta, and top subaqueous. The subaqueous is a typical coarse-fan deposit occurring in the glutinite member of the Jidike Formation in some wells. Laterally, from the foreland to the lacustrine settings, the distribution pattern of sedimentary facies represents the same three fan types sequentially. The spatial distribution of these fans was controlled by the Paleogene–Neogene Basin transformation, and evolution with different types of fans developed in the Kuqa Depression in response. In the Paleogene, the Kuqa Depression was a rift basin where an alluvial fan was deposited in the foreland setting, which, by early Neogene, became a foreland basin when the lake level changed. With any rise in lake level, fan-deltas migrated from lacustrine to foreland settings, whereas when the lake level fell, fan migration was reversed. In the early Neogene, with increasing slope and rising lake level, fans progressed and covered the previous fan-delta and lacustrine mudstone. Eventually, subaqueous fans developed, forming the present spatial configuration of these three fan types.