Structural style and evolution of the Gulf of Lion Oligo-Miocene rifting: role of the Pyrenean orogeny

The Gulf of Lion margin results from the Cligo-Aquitanian rifting and Burdigalian crustal separation between continental Europe and Corsica-Sardinia. Immediately before the onset of extension, the area of the Gulf of Lion was affected by the Pyrenean orogeny which controlled the structural style of the evolving margin. During extension, the foreland of the Pyrenean orogen was affected by extensional thin-skinned tectonics. The décollement level ramped down into the basement, in areas where the latter was thickened during orogeny. In this intermediate part, the margin was extended by several crustal-scale low-angle faults, which generated small amounts of syn-rift sedimentation compared with the accumulation of post-rift sediments. However, more than 4 km of syn-rift sediments were deposited in the Camargue basin, which is located at the transition between thin- and thick-skinned extensional systems. Kinematic restorations and stratigraphy suggest a pre-rift surface elevation above sea-level of at least 1 km in the intermediate part of the margin, which is in agreement with reduced syn-rift sedimentation. The slope area extends seaward of the North Pyrenean Fault, a terrane boundary inherited from the Pyrenean collision. This part of the margin was stretched by seaward dipping low-angle block tilting of the upper crust, and antithetic lower crustal and sub-crustal detachment. The lithospheric structures inherited from the Pyrenean orogeny exerted a strong control on the kinematics of the rifting and on the distribution and history of subsidence. Such parameters need to be integrated in the definition of pre-rift initial conditions in future basin-modelling of the Gulf of Lion.     

Deep crustal structure of the conjugate margins of the SW South China Sea from wide-angle refraction seismic data

The South China Sea is the largest marginal basin of SE Asia, yet its mechanism of formation is still debated. A 1000-km long wide-angle refraction seismic profile was recently acquired along the conjugate margins of the SW sub-basin of the South China Sea, over the longest extended continental crust. A joint reflection and refraction seismic travel time inversion is performed to derive a 2-D velocity model of the crustal structure and upper mantle. Based on this new tomographic model, northern and southern margins are genetically linked since they share common structural characteristics. Most of the continental crust deforms in a brittle manner. Two scales of deformation are imaged and correlate well with seismic reflection observations. Small-scale normal faults (grabens, horsts and rotated faults blocks) are often associated with a tilt of the velocity isocontours affecting the upper crust. The mid-crust shows high lateral velocity variation defining low velocity bodies bounded by large-scale normal faults recognized in seismic reflection profiles. Major sedimentary basins are located above low velocity bodies interpreted as hanging-wall blocks. Along the northern margin, spacing between these velocity bodies decreases from 90 to 45 km as the total crust thins toward the Continent–Ocean Transition. The Continent–Ocean Transitions are narrow and slightly asymmetric – 60 km on the northern side and no more than 30 km on the southern side – indicating little space for significant hyper-stretched crust. Although we have no direct indication for mantle exhumation, shallow high velocities are observed at the Continent–Ocean Transition. The Moho interface remains rather flat over the extended domain, and remains undisturbed by the large-scale normal faults. The main décollement is thus within the ductile lower crust.     

The final rifting evolution in the South China Sea

Seismic reflection data imaging conjugate crustal sections at the South China Sea margins result in a conceptual model for rift-evolution at conjugate magma-poor margins in time and space.The wide Early Cenozoic South China Sea rift preserves the initial rift architecture at the distal margins. Most distinct are regular undulations in the crust–mantle boundary. Individual rift basins are bounded to crustal blocks by listric normal faults on either side. Moho uplifts are distinct beneath major rift basins, while the Moho is downbended beneath crustal blocks, with a wavelength of undulations in the crust–mantle boundary that approximately equals the thickness of the continental crust. Most of the basin-bounding faults sole out within the middle crust. At the distal margins, detachment faults are located at a mid-crustal level where a weak zone decouples crust and mantle lithosphere during rifting. The lower crust in contrast is interpreted as being strong. Only in the region within about 50 km from the Continent–Ocean Transition (COT) we suggest that normal faults reach the mantle, enabling potentially a coupling between the crust and the mantle. Here, at the proximal margins detachment fault dip either seaward or landward. This may indicate the presence of exhumed mantle bordering the continental margins.Post-rift shallow-water platform carbonates indicate a delay in subsidence during rifting in the South China Sea. We propose that this is an inherent process in highly extended continental margins and a common origin may be the influx of warm asthenospheric material into initially cool sub-lithospheric mantle.On a crustal-scale largely symmetric process predominate in the initial rifting stage. At the future COT either of the rift basin-bounding faults subsequently penetrates the entire crust, resulting in asymmetry at this location. However, asymmetric deformation which is controlled by large scale detachment faulting is confined to narrow areas and does not result in a margin-wide simple-shear model. Rather considerable along-margin variations are suggested resulting in alternating “upper and lower plate” margins.     

Seismic stratigraphy and structural analysis of the northern East China Sea Shelf Basin interpreted from multi-channel seismic reflection data and cross-section restoration

Analysis of multi-channel seismic data from the northern East China Sea Shelf Basin (ECSSB) reveals three sub-basins (Socotra, Domi, and Jeju basins), separated by structural highs (Hupijiao Rise) and faulted basement blocks. These sub-basins show a typical rift-basin development: faulted basement and syn-rift and post-rift sedimentation separated by unconformities. Four regional unconformities, including the top of acoustic basement, have been identified and mapped from multi-channel seismic data. Faults in the acoustic basement are generally trending NE, parallel to the regional structural trend of the area. The depths of the acoustic basement range from less than 1000 m in the northwestern part of the Domi Basin to more than 4500 m in the Socotra Basin and 5500 m in the Jeju Basin. The total sediment thicknesses range from less than 500 m to about 1500 m in the northwest where the acoustic basement is shallow and reach about more than 5500 m in the south.Interpretation of seismic reflection data and reconstruction of three depth-converted seismic profiles reveal that the northern ECSSB experienced two phases of rifting, followed by regional subsidence. The initial rifting in the Late Cretaceous was driven by the NW-SE crustal stretching of the Eurasian Plate, caused by the subduction of the Pacific Plate beneath the Eurasian Plate. Extension was the greatest during the early phase of basin formation; estimated rates of extension during the initial rifting are 2%, 6.5%, and 3.5% in the Domi, Jeju, and Socotra basins, respectively. A regional uplift terminated the rifting in the Late Eocene-Early Oligocene. Rifting and extension, although mild, resumed in the Early Oligocene; while fluvio-lacustrine deposition continued to prevail. The estimated rates of extension during the second phase of rifting are 0.7%, 0.8%, and 0.5% in the Domi, Jeju, and Socotra basins, respectively. A second phase of uplift in the Early Miocene terminated the rifting, marking the transition to the post-rift phase of regional subsidence. Regional subsidence dominated the study area between the Early Miocene and the Late Miocene. An inversion in the Late Miocene interrupted the post-rift subsidence, resulting in an extensive thrust-fold belt in the eastern part of the area. Uplift and subsequent erosion were followed by regional subsidence.     

The role of permeability evolution in fault zones on the structural and hydro-mechanical characteristics of shortening basins

We examine the role of basin-shortening on the development of structural compartments in passive margin basins. A coupled flow-deformation model is used to follow the evolution of an idealized prismatic basin during lateral shortening. This includes the deformation-induced generation (lateral compaction) and dissipation (hydraulic fracturing) of pore fluid pressures and the resulting natural evolution of an underlying décollement and subsidiary fault structures. This model is used to examine the influence of strata stiffnesses, strain softening, permeability-strain dependence, permeability contrast between layers, and deformation rate on the resulting basin structure and to infer fluid charge within these structures. For a geometry with a permeability contrast at the base of the basin a basal décollement forms as the basin initially shortens, excess pore pressures build from the impeded drainage and hydrofracturing releases fluid mass and resets effective stresses. As shortening continues, thrust faults form, nucleating at the décollement. Elevated pore pressures approaching the lithostat are localized at the hanging wall boundary of the faults. Faults extend to bound blocks that are vertically offset to yield graben-like structural highs and lows and evolve with distinctive surface topography and separate pore pressure signatures. Up-thrust blocks have elevated fluid pressures and reduced effective stresses at their core, and down-thrust blocks the converse. The development of increased permeability on localized fault structures is a necessary condition to yield this up-thrust and down-thrust geometry. In the anti-physical case where evolution of permeability with shear strain is artificially suppressed, pervasive shear develops throughout the basin depth as fluid pressures are stabilized everywhere to the lithostat. Correspondingly, permeability evolution with shear is an important, likely crucial, feedback in promoting localization.     

琼东南盆地新生代构造研究现状及展望

琼东南盆地属于南海北部陆缘拉张盆地,但是由于其不同的发育历史及红河断裂的影响,具有与东部陆缘盆地不同的构造特征。琼东南盆地和珠江口盆地在地壳结构、基底特征等方面存在差异,但是这种差异的原因还不清楚。新生代沉降速率发生多期变化,并存在裂后异常沉降、沉降延迟等现象,其形成机制尚需要进一步研究;平面上,构造具有迁移性,但是对不同地质时期的构造迁移方向仍存在不同的看法。盆地沉降中心和沉积中心经历了由裂陷期和裂后早期的较好重合到裂后晚期的逐步分离,直至完全分离的过程。盆地形成与地幔流的关系,以及红河断裂对盆地裂后沉降迁移的影响,也都是需要进一步确定的工作。鉴于以上各方面存在的问题,对琼东南盆地与南沙的共轭关系、盆地异常沉降、红河断裂及内部构造转换带对构造迁移的影响、以及琼东南盆地与珠江口盆地的比较等方面的研究是下一步工作的重点。     

Different expressions of rifting on the South China Sea margins

Rifting of continental margins is generally diachronous along the zones where continents break due to various factors including the boundary conditions which trigger the extensional forces, but also the internal physical boundaries which are inherent to the composition and thus the geological history of the continental margin. Being opened quite recently in the Tertiary in a scissor-shape manner, the South China Sea (SCS) offers an image of the rifting structures which varies along strike the basin margins. The SCS has a long history of extension, which dates back from the Late Cretaceous, and allows us to observe an early stretching on the northern margin onshore and offshore South China, with large low angle faults which detach the Mesozoic sediments either over Triassic to Early Cretaceous granites, or along the short limbs of broad folds affecting Palaeozoic to Early Cretaceous series. These early faults create narrow troughs filled with coarse polygenic conglomerate grading upward to coarse sandstone. Because these low-angle faults reactivate older trends, they vary in geometry according to the direction of the folds or the granite boundaries. A later set of faults, characterized by generally E–W low and high angle normal faults was dominant during the Eocene. Associated half-graben basement deepened as the basins were filling with continental or very shallow marine sediments. This subsequent direction is well expressed both in the north and the SW of the South China Sea and often reactivated earlier detachments. At places, the intersection of these two fault sets resulting in extreme stretching with crustal boudinage and mantle exhumation such as in the Phu Khanh Basin East of the Vietnam fault. A third direction of faults, which rarely reactivates the detachments is NE–SW and well developed near the oceanic crust in the southern and southwestern part of the basin. This direction which intersects the previous ones was active although sea floor spreading was largely developed in the northern part, and ended by the Late Miocene after the onset of the regional Mid Miocene unconformity known as MMU and dated around 15.5 Ma. Latest Miocene is marked by a regional basement drop and localized normal faults on the shelf closer to the coast. The SE margin of the South China Sea does not show the extensional features as well as the Northern margin. Detachments are common in the Dangerous Grounds and Reed Bank area and may occasionally lead to mantle exhumation. The sedimentary environment on the extended crust remained shallow all along the rifting and a large part of the spreading until the Late Miocene, when it suddenly deepened. This period also corresponds to the cessation of the shortening of the NW Borneo wedge in Palawan, Sabah, and Sarawak. We correlate the variation of margin structure and composition of the margin; mainly the occurrence of granitic batholiths and Mesozoic broad folds, with the location of the detachments and major normal faults which condition the style of rifting, the crustal boudinage and therefore the crustal thickness.     

南沙海域中建南盆地的磁性基底及地壳结构

通过对南沙海域中建南盆地重磁资料的分析及反演计算,依据盆地的地质与地球物理特征,对地震资料难以解决的基底结构、性质进行了研究,确定了磁性基底与莫霍面深度,确定了地壳类型,并对盆地内的深部大断裂及磁性基岩属性作了推断,为今后的研究提供了依据。     

Seismic stratigraphy and subsidence analysis of the southern Brazilian margin (Campos,Santos and Pelotas basins)

The Campos, Santos and Pelotas basins have been investigated in terms of 2D seismo-stratigraphy and subsidence. The processes controlling accommodation space (e.g. eustacy, subsidence, sediment input) and the evolution of the three basins are discussed. Depositional seismic sequences in the syn-rift Barremian to the drift Holocene basin fill have been identified. In addition, the subsidence/uplift history has been numerically modeled including (i) sediment flux, (ii) sedimentary basin framework, (iii) relation to plate-tectonic reconfigurations, and (iv) mechanism of crustal extension. Although the initial rift development of the three basins is very similar, basin architecture, sedimentary infill and distribution differ considerably during the syn-rift sag to the drift basin stages. After widespread late Aptian–early Albian salt and carbonate deposition, shelf retrogradation dominated in the Campos Basin, whereas shelf progradation occurred in the Santos Basin. In the Tertiary, these basin fill styles were reversed: since the Paleogene, shelf progradation in the Campos Basin contrasts with overall retrogradation in the Santos Basin. In contrast, long-term Cretaceous–Paleogene shelf retrogradation and intense Neogene progradation characterize the Pelotas Basin. Its specific basin fill and architecture mainly resulted from the absence of salt deposition and deformation. These temporally and spatially varying successions were controlled by specific long-term subsidence/uplift trends. Onshore and offshore tectonism in the Campos and Santos basins affected the sediment flux history, distribution of the main depocenters and occurrence of hydrocarbon stratigraphic–structural traps. This is highlighted by the exhumation and erosion of the Serra do Mar, Serra da Mantiqueira and Ponta Grossa Arch in the hinterland, as well as salt tectonics in the offshore domain. The Pelotas Basin was less affected by changes in structural regimes until the Eocene, when the Andean orogeny caused uplift of the source areas. Flexural loading largely controlled its development and potential hydrocarbon traps are mainly stratigraphic.     

Evolution of the Grenada and Tobago basins and implications for arc migration

The tectonic mechanisms controlling how volcanic arcs migrate through space and geologic time within dynamic subduction environments is a fundamental tectonic process that remains poorly understood. This paper presents an integrated stratigraphic and tectonic evolution of Late Cretaceous to Recent volcanic arcs and associated basins in the southeastern Caribbean Sea using seismic reflection data, wide-angle seismic refraction data, well data, and onland geologic data. We propose a new tectonic model for the opening of the Grenada and Tobago basins and the 50-250-km eastward jump of arc volcanism from the Late Cretaceous Aves Ridge to the Miocene to Recent Lesser Antilles arc in the southeast Caribbean based on the mapping of three seismic megasequences. The striking similarity of the half-graben structure of the Grenada and Tobago basins that flank the Lesser Antilles arc, their similar smooth basement character, their similar deep-marine seismic facies, and their similar Paleogene sediment thickness mapped on a regional grid of seismic data suggest that the two basins formed as a single, saucer-shaped, oceanic crust Paleogene forearc basin adjacent to the now dormant Aves Ridge. This single forearc basin continued to extend and widen through flexural subsidence during the early to middle Eocene probably because of slow rollback of the subducting Atlantic oceanic slab. Rollback may have been accelerated by oblique collision of the southern Aves Ridge and southern Lesser Antilles arc with the South American continent. Uplift and growth of the southern Lesser Antilles arc divided the Grenada and Tobago basins by early to middle Miocene time. Inversion of normal faults and uplift effects along both edges of the Lesser Antilles arc are most pronounced in its southern zone of arc collision with the South American continent. The late Miocene to Recent depositional histories of the Grenada and Tobago basins are distinct because of isolation of the Grenada basin by growth and uplift of the Neogene Lesser Antilles volcanic ridge.     

Tectonostratigraphy and sedimentary architecture of rift basins, with reference to the northern North Sea

A tectonostratigraphic model for the evolution of rift basins has been built, involving three distinct stages of basin development separated by key unconformities or unconformity complexes. The architecture and signature of the sediment infill for each stage are discussed, with reference to the northern North Sea palaeorift system. The proto-rift stage describes the rift onset with either doming or flexural subsidence. In the case of early doming, a proto-rift unconformity separates this stage from the subsequent main rift stage. Active stretching and rotation of fault blocks during the rift stage is terminated by the development of the syn-rift unconformity. Where crustal separation is accomplished, a break-up unconformity commonly marks the boundary to the overlying thermal relaxation or post-rift stage. Tabular architectures, thickening across relatively steep faults, characterize the proto-rift stage. Syn-rift architectures are much more variable. Depending on the ability of the sediment supply to fill the waxing and waning accommodation created during rotation and subsidence, one-, two- or three-fold lithosome architectures are likely to develop. During the post-rift stage, an early phase with coarse clastic infilling of remnant rift topography often precedes late stage widening of the basin and filling with fine-grained sediments.     

Salt tectonics and tear faulting in the central part of the Zagros Fold-Thrust Belt,Iran

The central part of the Zagros Fold-Thrust Belt is characterized by a series of right-lateral and left-lateral transverse tear fault systems, some of them being ornamented by salt diapirs of the Late Precambrian–Early Cambrian Hormuz evaporitic series. Many deep-seated extensional faults, mainly along N–S and few along NW–SE and NE–SW, were formed or reactivated during the Late Precambrian–Early Cambrian and generated horsts and grabens. The extensional faults controlled deposition, distribution and thickness of the Hormuz series. Salt walls and diapirs initiated by the Early Paleozoic especially along the extensional faults. Long-term halokinesis gave rise to thin sedimentary cover above the salt diapirs and aggregated considerable volume of salt into the salt stocks. They created weak zones in the sedimentary cover, located approximately above the former and inactive deep-seated extensional faults. The N–S to NNE–SSW direction of tectonic shortening during the Neogene Zagros folding was sub-parallel with the strikes of the salt walls and rows of diapirs. Variations in thickness of the Hormuz series prepared differences in the basal friction on both sides of the Precambrian–Cambrian extensional faults, which facilitated the Zagros deformation front to advance faster wherever the salt layer was thicker. Consequently, a series of tear fault systems developed along the rows of salt diapirs approximately above the Precambrian–Cambrian extensional faults. Therefore, the present surface expressions of the tear fault systems developed within the sedimentary cover during the Zagros orogeny. Although the direction of the Zagros shortening could also potentially reactivate the basement faults as strike-slip structures, subsurface data and majority of the moderate-large earthquakes do not support basement involvement. This suggests that the tear fault systems are detached on top of the Hormuz series from the deep-seated Precambrian–Cambrian extensional faults in the basement.     

Salt rollers: Structure and kinematics from analogue modelling

Salt rollers are low-amplitude deflections of the upper surface of a salt layer which occur below zones of normal faulting in the overlying sediments. They are widely recognised in association with tilted blocks or listric fault rollover systems. Laboratory experiments on brittle ductile models made of sand and silicone putty are used to study the modes of development, the external shape and the internal structures of these salt rollers. Firstly, flow and strain patterns within décollement zones are described. Finite strain combines layer-perpendicular shortening and layer-parallel shear. Additional flow cells within rollers perturb the laminar flow of the décollement, inducing a passive folding of planar markers. The same type of flow and strain patterns occur in all types of rollers, ranging from those occurring below tilted blocks to those associated with growth faults. Finally, an analysis of roller shapes through the measurement of aspect ratios and asymmetry ratios shows that the shapes of tilted blocks rollers and growth fault rollers—which differ at initiation tend to converge with increasing deformation.     

The continent-ocean transition at the southeastern margin of the South China Sea

The South China Sea formed by magma-poor, or intermediate volcanic rifting in the Paleogene. We investigate the structure of the continent-ocean transition (COT) at its southern margin, off NW Palawan between the continental blocks of Reed Bank and the islands of Palawan and Calamian. Several surveys, recorded by the BGR from 1979 to 2008, established a comprehensive database of regional seismic lines, accompanied with magnetic and gravity profiles.We interpret two major rifted basins, extending in the NE direction across the shelf and slope, separated by a structural high of non volcanic origin.The continent-ocean transition is interpreted at the seaward limit of the continental crust, when magnetic spreading anomalies terminate some 80-100 km farther north. The area in between displays extensive volcanism - as manifest by extrusions that occasionally reach and cut the seafloor, by dykes, and by presumed basaltic lava flows - occurring after break-up.The COT is highly variable along the NW Palawan slope: One type shows a distinct outer ridge at the COT with a steep modern seafloor relief. The other type is characterised by rotated fault blocks, bounded by listric normal faults ramping down to a common detachment surface. Half-grabens developed above a strongly eroded pre-rift basement. The seafloor relief is smooth across this other type of COT.We suggest the pre-rift lithospheric configuration had major influence on the formation of the COT, besides transfer zones. Volcanic domains, confined to the north of competent crustal blocks correlate with the style of the COT.Gravity modelling revealed an extremely thinned crust across the shelf. We propose a depth-dependent extension model with crust being decoupled from mantle lithosphere, explaining the discrepancy of subsidence observed across the South China Sea region.     

西地中海的弧后盆地

地中海是太平洋之外弧后盆地较为发育的海区。巴利阿里海盆和第勒尼安海盆是西地中海两个位置相邻、互有成因联系的弧后盆地。海盆莫霍面埋深分别为 1 2～ 1 5km和 1 0 km,热流密度分别为 1 0 0 m W/m2和 2 0 0 m W/m2 ,发育有大洋型磁条带异常 ,大洋钻探和拖网取样均采到了拉斑玄武岩。较之巴利阿里海盆 ,第勒尼安海盆更富年青性。两弧后盆地的成生演化是与欧洲板块与非洲 -阿普利亚板块的相互作用息息相关的。中新世 ,随着非洲 -阿普利亚板块向西、西北俯冲 ,科西嘉、撒丁裂离欧洲大陆 ,巴利阿里海盆被打开 ;上新世 ,阿普利亚微板块进一步俯冲 ,导致亚平宁与科西嘉、撒丁之间的裂离 ,形成第勒尼安海盆。     

4D analogue modelling of transtensional pull-apart basins

Scaled sandbox models were used to investigate the 4D evolution of pull-apart basins formed above underlapping releasing stepovers in both pure strike-slip and transtensional basement fault systems. Serial sectioning and 3D volume reconstruction permitted analysis of the full 3D fault geometries. Results show that very different pull-apart basins are developed in transtension compared to pure strike-slip. Both types of models produced elongate, sigmoidal to rhomboidal pull-apart systems, but the transtensional pull-apart basins were significantly wider and uniquely developed a basin margin of en-echelon oblique-extensional faults. Dual, opposing depocentres formed in the transtensional model whereas a single, central depocentre formed in pure strike-slip. In transtension, a distinct narrow graben system formed above the principal displacement zones (PDZs). Cross-basin fault systems that linked the offset PDZs formed earlier in the transtensional models.Sequential model runs to higher PDZ displacements allowed the progressive evolution of the fault systems to be evaluated. In cross-section, transtensional pull-aparts initiated as asymmetric grabens bounded by planar oblique-extensional faults. With increasing displacement on the PDZs, basin subsidence caused these faults to become concave-upwards and lower in dip angle due to fault block collapse towards the interior of the basin. In addition, strain partitioning caused fault slip to become either predominantly extensional or strike-slip. The models compare closely with the geometries of natural pull-apart basins including the southern Dead Sea fault system and the Vienna Basin, Austria.     

Neogene history of Bone Gulf,Sulawesi, Indonesia

Bone Gulf is one of the inter-arm basins of the unusual K-shaped island of Sulawesi. Its age, character and origin are disputed. This study is based on recently acquired 2D seismic lines, seabed multibeam mapping and limited well data, and is linked to stratigraphy on land. The gulf is probably underlain by pre-Neogene volcanogenic, sedimentary, metamorphic and ultramafic rocks, and includes crust of Australian origin. We favour basin initiation in the Miocene rather than Eocene, by extension associated with strike-slip deformation. The main basin trends N–S and is divided into several sub-basins and highs. The highs segment the gulf and their WNW–ESE orientations reflect pre-Neogene basement structures. They are interpreted as strike-slip fault zones active at different times in the Neogene. A southern high was active relatively early, whereas further north there is evidence of young displacements during the Late Neogene. These are visible on the seabed above a high linked to the Kolaka Fault on land. Early basin-bounding faults are oriented NNW–SSE and record extension and strike-slip movements, like the sub-parallel Walanae Fault of South Sulawesi which can be traced offshore into extensional faults bounding the young and narrow Selayar Trough. Sediment in the basins came mainly from the north with contributions from both west and east. Carbonate deposits formed at the margins while deeper marine sediments were deposited in the axial parts of the gulf. An Early Pliocene unconformity can be mapped across the study area marking major uplift of Sulawesi and subsidence of Bone Gulf. This regional event caused major influx of clastic sediments from the north, development of a southward-flowing canyon system, and back-stepping and drowning of carbonates at the basin margins. Hydrocarbons are indicated by seeps, and Bone Gulf has potential sources, reservoirs and seals, but the complex faulting history is a risk.     

Structures of the northeasternmost South China Sea continental margin and ocean basin: geophysical constraints and tectonic implications

The northeastern part of the South China Sea is a special region in many aspects of its tectonics. Both recent drilling into the Mesozoic and new reflection seismic surveys in the area provide a huge amount of data, fostering new understanding of the continental margin basins and regional tectonic evolution. At least four half-grabens are developed within the Northern Depression of the Tainan Basin, and all are bounded on their southern edges by northwestward-dipping faults. One of the largest half-grabens is located immediately to the north of the Central Uplift and shows episodic uplift from the late Oligocene to late Miocene. Also during that period, the Central Uplift served in part as a material source to the Southern Depression of the Tainan Basin. The Southern Depression of the Tainan Basin is a trough structure with deep basement (up to 9 km below sealevel or 6 km beneath the sea bottom) and thick Cenozoic sedimentation (>6 km thick). Beneath the Southern Depression we identified a strong landward dipping reflector within the crustal layer that represents a significant crustal fault. This reflector coincides with a sharp boundary in crustal thicknesses and Moho depths. We show that the northeasternmost South China Sea basin, which may have undergone unique evolution since the late Mesozoic, is markedly different from the central South China Sea basin and the Huatung Basin, both geologically and geophysically. The Cenozoic evolution of the region was largely influenced by pre-existing weaknesses due to tectonic inheritance and transition. The South China Sea experienced multiple stages of Cenozoic extension.     

Analysis of gravity field to reconstruct the structure of Omo basin in SW Ethiopia and implications for hydrocarbon potential

The Omo basin in south western Ethiopia at the Kenyan boundary is a northern extension of the trans- boundary Turkana rift. It is an Early Pliocene north-south trending depression bounded on either side by normal faulting. The Omo river flows in the middle of the basin and empties itself at its southern end into Lake Turkana.The structural pattern of the Omo basin is determined from 2D and 3D analyses of the gravity field. The basin is an asymmetric half-graben formed by and localized within the NS/NNE trending Early Pliocene normal faults. It is built up on the older NW trending structures that were reactivated and affected the recent NS faults. Automatic depth determination techniques and 3D inversion are used to estimate depth to the basement and determine the sedimentary thickness. The results indicate over 4 km thick sediments were deposited over the graben.The Omo basin lies within the East African Rift system and appears to connect the generally NW trending oil-rich Muglad-Melut basins of south Sudan and the highly prospective and similarly trending Anza graben of Kenya. The Omo basin contains thick sequence of sediments and appears to be a promising future site of intensive hydrocarbon exploration.     

A new look at the Rockall region, offshore Ireland

A 700 km wide-angle reflection/refraction profile carried out in the central North Atlantic west of Ireland crossed the Erris Trough, Rockall Trough and Rockall Bank, and terminated in the western Hatton-Rockall Basin. The results reveal the presence of a number of sedimentary basins separated by basement highs. The Rockall Trough, with a sedimentary pile up to 5 km thick, is underlain by thinned continental crust 8–10 km thick. Some major fault block structures are identified, especially on the eastern margin of the Rockall Trough and in the adjacent Erris Trough. The Hatton-Rockall Basin is underlain by westward-thinning continental crust 22–10 km thick. Sedimentary strata are up to 5 km thick. The strata in the Rockall Trough and Hatton-Rockall Basin probably range in age from Late Palaeozoic to Cenozoic. However, the basins have different sedimentation histories and differ in structural style. The geometry of the crust and sediments suggests that the Rockall Trough originated by pure shear crustal stretching, associated with rift deposits and Cenozoic thermal sag strata. In contrast, the development of the Erris Trough, located on unthinned continental crust, was facilitated by shallow, brittle extension with little deep crustal attenuation. A two-layered crust occurs throughout the region. The lower crustal velocity in the Hatton-Rockall Basin is higher than that in the Rockall Trough. The velocity structure shows no indication of crustal underplating by upper mantle material in the region.