华北地台东部石炭—二叠纪岩相古地理特征

华北地台东部石炭—二叠纪沉积建造由５个沉积层序构成，下部ＤＳ１—ＤＳ３为陆表海型层序，ＤＳ４为过渡型层序，ＤＳ５为湖泊型层序。从早石炭世晚期至晚二叠世早期，华北陆表海的海侵范围自东向西、自北而南依次发展，这一岩相古地理演化过程主要受地台北部的阴山—燕山造山带在华力西期已经开始关闭，而地台南侧的秦岭造山带在晚华力西期至印支期由东向西逐次闭合这一过程的控制。     

Crustal scale balanced cross-sections of the Pyrenees; discussion

From surface and subsurface data, line-length and area balancing were used to construct four balanced and restored sections of the Pyrenees. In the Mesozoic cover, a thin-skinned tectonic model is used. In the basement an anticlinal stack geometry is applied for the foreland part of the thrust nappes. We present and discuss three possible models for the deep structures of the belt: a thin-skinned tectonic model, a thick-skinned tectonic model and an inhomogeneous strain model. The thrusts steepen downwards and the displacements die out in ductile deformation deep in the section. Therefore, we use the inhomogeneous strain model and we equal-area balance the surface of the continental crust.Hanging-wall sequence diagrams are constructed taking into account (1) the strong N-S thickness variations of the Mesozoic cover related to the Cretaceous drift of Spain and (2) the related crustal thinning of the North Pyrenean Zone superimposed upon a previous late Hercynian rise of the lower crust.The Moho step at the vertical of the North Pyrenean Fault results from the thinning of the North Pyrenean Zone. The thickening of both the Axial Zone and the North Pyrenean Zone during the Eocene compressional event preserved the step geometry.Calculated values of the minimum shortening range from 55 km in the western part of the belt to 80 km in the eastern part. Most of the shortening occurs south of the North Pyrenean Fault in the eastern part (Axial Zone) and north of the North Pyrenean Fault in the western part (Labourd thrust).     

Lithospheric transition from the Variscan Iberian Massif to the Jurassic oceanic crust of the Central Atlantic

A 1000-km-long lithospheric transect running from the Variscan Iberian Massif (VIM) to the oceanic domain of the Northwest African margin is investigated. The main goal of the study is to image the lateral changes in crustal and lithospheric structure from a complete section of an old and stable orogenic belt—the Variscan Iberian Massif—to the adjacent Jurassic passive margin of SW Iberia, and across the transpressive and seismically active Africa–Eurasia plate boundary. The modelling approach incorporates available seismic data and integrates elevation, gravity, geoid and heat flow data under the assumptions of thermal steady state and local isostasy. The results show that the Variscan Iberian crust has a roughly constant thickness of 30 km, in opposition to previous works that propose a prominent thickening beneath the South Portuguese Zone (SPZ). The three layers forming the Variscan crust show noticeable thickness variations along the profile. The upper crust thins from central Iberia (about 20 km thick) to the Ossa Morena Zone (OMZ) and the NE region of the South Portuguese Zone where locally the thickness of the upper crust is <8 km. Conversely, there is a clear thickening of the middle crust (up to 17 km thick) under the Ossa Morena Zone, whereas the thickness of the lower crust remains quite constant (6 km). Under the margin, the thinning of the continental crust is quite gentle and occurs over distances of 200 km, resembling the crustal attitude observed further north along the West Iberian margins. In the oceanic domain, there is a 160-km-wide Ocean Transition Zone located between the thinned continental crust of the continental shelf and slope and the true oceanic crust of the Seine Abyssal Plain. The total lithospheric thickness varies from about 120 km at the ends of the model profile to less than 100 km below the Ossa Morena and the South Portuguese zones. An outstanding result is the mass deficit at deep lithospheric mantle levels required to fit the observed geoid, gravity and elevation over the Ossa Morena and South Portuguese zones. Such mass deficit can be interpreted either as a lithospheric thinning of 20–25 km or as an anomalous density reduction of 25 kg m⁻³ affecting the lower lithospheric levels. Whereas the first hypothesis is consistent with a possible thermal anomaly related to recent geodynamics affecting the nearby Betic–Rif arc, the second is consistent with mantle depletion related to ancient magmatic episodes that occurred during the Hercynian orogeny.     

新疆阿尔泰花岗岩类源区物质的定量模拟

对产出于阿尔泰、额尔齐斯、乌化古三条构造-岩浆带上的六个典型岩体进行了源区岩石化学组成和初始熔体部分熔融程度的定量模拟。模拟结果表明:六个岩体的ε_(Sr)~t值多介于0-120之间,源区岩石多为地幔物质与陆壳物质的混合源,地壳柱中成熟陆壳所占比例较少,反映了中亚型地洼区在地壳化学结构上的一个重要特征.从北往南,ε_(Sr)~t值与壳源锶所占百分率逐渐减小,反映了从地槽造山带核心部位往边缘部位往边缘部位,地壳柱中成熟陆壳所占比例逐渐减小。初始熔浆部分熔融程度温度、压力呈正消长关系。     

Seismic investigations along the European Geotraverse and its surroundings in Central Europe

Since 1975 several high-resolution seismic-refraction and reflection surveys have been carried out in western Germany to investigate the structure of the Earth's crust and uppermost mantle. The investigation culminated in the seismic-refraction survey along the 825 km long central part of the European Geotraverse (EGT) in 1986. This contribution summarizes the main results of the more recent crustal investigations along and around the EGT. The internal crustal structure throughout the area of the Variscides is very complex and changes laterally considerably. Distinct crustal blocks differing in their internal structure can be assigned to geologically defined units of the Variscan and Caledonian orogeny. In spite of local deviations, in general a more or less transparent and low-velocity upper crust contrasts with a highly reflective lower crust. A subdivision of upper and lower crust by a well-defined boundary (Conrad discontinuity) is not always seen. Towards the Alps the average velocity of the lower crust is as low as 6.2 km s^?1, in contrast to the area north of the Swabian Jura where the velocities above Moho vary between 6.8 and 7.2 km s^?1. In Northern Germany, the Elbe line separates the lower crust into two regions with 6.4 km s^?1 average velocity in the south and 6.9 km s^?1 in the north. The total crustal thickness under the Variscan part of Germany is fairly constant between 28 and 30 km, except under the Rhine Graben area with 25–26 km and beneath the central part of the Rhenish Massif where an anomalous crustal thickening to 37 km is observed. Under northern Germany the Moho rises to about 26 km depth and the data indicate at least one fault-like step of 1 km before the crust thickens toward the Ringkobing-Fyn basement high. The synthesis of seismic velocity structure and petrological information from xenolith studies allows us to propose a mafic composition for the deeper levels of the crust and uppermost mantle which may be valid at least for the central part of the Variscan crust along the European Geotraverse in Central Europe.     

云南地质(断裂)构造骨架新认识

云南最主要的骨架断裂构造是德钦-阿墨江西部大洋向东部扬子大陆及其增生带俯冲的深大断裂（F5），其西部为澜沧．西盟微板块，崇山微板块，高黎贡山微板块。从华力西运动开始至喜马拉雅运动期间，从5SW向NNE方向漂移，逐一拼贴而显今日之貌。F5深大断裂两侧，矿产形成地质环境、形成机理差异大，找矿勘查的思路和侧重点也不尽相同。卫片图上看，碧罗雪山-沦源（西）深断裂（F2）经保山市东侧往南直下，而F2断裂与南澜沧江断裂（F4）极不协调，具有前者切错后者的迹象。本文把以往认为沿澜沧江是一条完整的深大断裂划分为碧罗雪山-沧源（西）深大断裂（F2）和南澜沧江深大断裂（F4）两部分。     

青藏高原深部地质特征及其形成机制探讨

本文据中-法合作期间的地震广角反射资料阐述了青藏高原的深部地壳结构及构造特征,结合地表地质现象探讨了高原的形成机制。资料表明青藏高原上、下地壳分别增厚一倍左右,最厚处达75km。它是由来自北侧并逐渐向南推挤的强大水平力,使该区地壳与其南部的印度地块相碰并受其阻挡,在经向水平挤压力的长期作用下,该区地壳终于从喜马拉雅运动早期开始,在经向上因地壳片段的褶皱和叠覆而缩短,在垂向上急剧增厚和抬升而形成高原。这是构造力与重力联合作用的结果。     

恩格尔乌苏冲断带特征及大地构造意义

研究表明恩格尔乌苏冲断带是华北板块和塔里木板块的缝合线,北东东向断续延长800km以上。该冲断带连同南北陆缘地带构造构成典型的陆-弧-陆碰撞造山带,与碰撞造山作用同时,形成区域性透入性劈理。地层学和同位素地质年代学资料表明,碰撞造山作用发生于海西末期或印支早期。碰撞造山作用的动力学过程主要表现为向南的洋壳俯冲和向北的陆壳仰冲,并伴随右旋剪切滑移运动。恩格尔乌苏混杂岩带为韧性-韧脆性冲断推覆构造,其北侧的前陆褶皱冲断带为脆性-脆韧性冲断推覆及褶皱构造。     

TECTONICS OF THE DABIE OROGENIC BELT, CENTRAL CHINA

Tectonically the Dabie orogenic belt consists mainly of the Dabieshan Yanshanian uplifted zone and the Beihuaiyang Variscan-Indosinian folding zone. In the north boundary adjoining the North China Block, there are an Early Palaeozoic ophiolitic mixtite belt and the Hefei Mesozoic-Cenozoic faulted basin which overlaps on the suture belt. In the south of Dabie orogen, there is a secondary tectonic unit called Foreland thrust-faulted structural zone which was mainly formed by the intracontinental subductions during Mesozoic era. The study shows that the Dabie Block is a part of mid-late Proterozoic palaeo-island arc at the north margin of Yangtze Block. During Caledonian period, as a submerged uplift at the northen continental margin of Yangtze Block, the Dabie Block collided with the early Palaeozoic palaeo-island arc at the south margin of North China Block, resulting in the convergence of the North and South China Blocks and the disappearance of oceanic crust. Since then,large-scale intracontinental subductions were followed. Dabie Orogenic Belt is the product of overlapping of Yangtze Block, Dabie Block and North China Block under the mechanism of intracontinental subduction. Indosinian period is the period of chief deformation and high pressure dynamic metamorphism for Dabie Block, and Yanshan period is the main orogenic period in which the remelting of crust caused by basement shearing resulted in large scale thermometamorphism. The present tectonic framework of the orogen was finally formed by the rapid uplifting of the Dabieshan mountains and gliding southwards, which result in the developing of thrust belt on south side and the extensional tectonic movement on north side.     

THICKNESS OF THE CRUST AND ITS RELATIONSHIP TO RELIEF AND GRAVITY ANOMALIES

The effect of different crustal thickness on a regional gravity field may be differentiated, as a first approximation, into-three layers: 1) sedimentary, 2) granitic, and 3) basaltic. The study of complex “wave pictures” obtained in deep seismic sounding has lead to differentiation of the crust as continental, oceanic, and transitional, with a general relationship existing between the surface tectonics of the crust and its deeper structures. The crust is thickest in the mountain regions (40 km-80 km) as against an average for the platforms of about 25 km-35 km. It appears that there are two particularly conspicuous gravity and seismic discontinuities in the crust; one between the sedimentary mantle and the so-called crystalline layer and the other between the latter and the M surface. Tentative estimations of crustal thickness are as follows: the Russian Platform and the north of the western Siberian Platform; 30 km-34 km; the Black Sea about 24 km; the entire south, southeast and east of the U. S. S. R. are marked by greater depth with the Pamirs having a thickness of over 70 km; in the Caucasus the M surface lies below 45 km; in the Northern Kazakhstan the crust is 34 km-36 km thick; in the Altay thickness of around 50 km are indicated; in the Eurasian continent, Tibet has the thickest crust, the gravity minimum indicating about 85 km; in the Verkoyansk region the M surface is over 43 km. Large areas of the Arctic Ocean is occupied by the shelf with a thickness similar to that in the north of the country. This suggests that a considerable stretch of the ocean adjacent to the northern shores of the U. S. S. R. has a continental type. The crust thins rapidly to the north to about 10 km. Along the Pacific coast the M surface is about 33 km, the shelf zone is rather narrow including the Sea of Okhotsk. Toward the ocean and the Kuriles the crust thins rapidly to 10 km. -- C. E. Sears.     

TECTONICS OF THE DABIE OROGENIC BELT, CENTRAL CHINA

Tectonically the Dabie orogenic belt consists mainly of the Dabieshan Yanshanian uplifted zone and the Beihuaiyang Variscan-Indosinian folding zone. In the north boundary adjoining the North China Block, there are an Early Palaeozoic ophiolitic mixtite belt and the Hefei Mesozoic-Cenozoic faulted basin which overlaps on the suture belt. In the south of Dabie orogen, there is a secondary tectonic unit called Foreland thrust-faulted structural zone which was mainly formed by the intracontinental subductions during Mesozoic era. The study shows that the Dabie Block is a part of mid-late Proterozoic palaeo-island arc at the north margin of Yangtze Block. During Caledonian period, as a submerged uplift at the northen continental margin of Yangtze Block, the Dabie Block collided with the early Palaeozoic palaeo-island arc at the south margin of North China Block, resulting in the convergence of the North and South China Blocks and the disappearance of oceanic crust. Since then,large-scale intracontinental subductions were followed. Dabie Orogenic Belt is the product of overlapping of Yangtze Block, Dabie Block and North China Block under the mechanism of intracontinental subduction. Indosinian period is the period of chief deformation and high pressure dynamic metamorphism for Dabie Block, and Yanshan period is the main orogenic period in which the remelting of crust caused by basement shearing resulted in large scale thermometamorphism. The present tectonic framework of the orogen was finally formed by the rapid uplifting of the Dabieshan mountains and gliding southwards, which result in the developing of thrust belt on south side and the extensional tectonic movement on north side.     

A rifted tectonic setting for hercynian high-thermal gradient metamorphism in the pyrenees

Hercynian regional metamorphic terrains in the Pyrenees contain evidence of very high-temperature gradients within the crust during metamorphism, with temperatures as high as 700°C attained at 10–12 km below the surface. Stable isotope studies demonstrate that the crust was simultaneously flushed by marine fluids to at least this depth. The absence of any evidence for crustal collision, and the Upper Palaeozoic stratigraphic record for the area, suggest that the tectonic setting for the metamorphism was a zone of continental rifting associated with strike-slip movement. In this zone anatexis occurred at two distinct levels: Cambro-Ordovician pelites at the base of the Palaeozoic sedimentary pile melted to produce per-aluminous magmas, while in the lower Hercynian crust, very large-scale melting generated voluminous granodioritic magmas which then invaded high-structural levels. The thermal structure of the Hercynian crust was profoundly influenced by both convective and advective heat transfer, due to movement of surface derived aqueous fluids, and intrusion of magmas.     

Plate and intraplate processes of Hercynian Europe during the late paleozoic

It is speculated that until Late Carboniferous time the region of Hercynian Europe was occupied by an elongated island arc system underlain by a segment of continental crust. In the Upper Carboniferous, two subduction zones are assumed to have extended from the north and south beneath Hercynian Europe. An extensive zone of hot, partially molten upper mantle lay above and between these, and diapiric uprise of portions of this material led to separation of mafic magmas, widespread partial melting in the lower and middle crust, high temperature-low pressure metamorphism in crustal rocks, and regional uplift and extension of the crust, as indicated by intermontane troughs and their associated volcanic rocks.In Visean to Westphalian time Hercynian Europe collided with both the large neighbouring plates North America-Europe and Africa. During these diachronous collisions and owing to reduced rigidity of the relatively hot island arc crust, the irregular continental margins of the larger and thicker continental plates induced oroclinal bending of Hercynian Europe. After the collision processes had been terminated, processes of upper mantle activity continued, causing further crustal uplift and even, enhanced crustal extension for several tens of million years into the Lower Permian. Decline of the upper mantle activity beneath Hercynian Europe is indicated by crustal subsidence and formation of a peneplain in Permian time followed by the Upper Permian transgression of both the Zechstein sea and the Tethys sea which mark the end of the Hercynian geodynamic cycle.     

Rheological control on the tectonic evolution of a continental suture zone: the Variscan example from NW Iberia (Spain)

The Variscan continental suture zone exposed in NW Iberia is examined to uncover the long-lived rheological control exerted by the strata deposited over the external parts of Gondwana on its geodynamic evolution. The suture occurs within a set of allochthonous terranes whose limits were taken as domain boundaries to interpret the Variscan stacking of Paleozoic continental domains and retrodeform the resulting nappe pile. The suture zone formed due to closure of ocean basins located between Gondwana and Laurussia during the Late Paleozoic and consists of relics of oceanic and transitional crust. The suture zone exhibits a tabular to lens shape due to repeated tectonic events dominated by non-coaxial deformation (thrusts and low-angle normal faults). Thrusting and normal faulting also involved the margins of the continents bounding the suture. The structure of the continental blocks, however, is dominated by folds, particularly large nappe folds with pronounced superimposed flattening. The upper part of the basal allochthonous units comprises a rheologically incompetent domain below the suture zone. This domain is typified by the carbonaceous-rich strata, which are probably Ordovician–Silurian sediments based on U–Pb detrital zircon populations. The rheology of this layer determined the location of the first accretionary thrust that initiated the Late Devonian subduction of the Gondwana margin below the suture zone. By favoring fault development, the upper sequence of the basal allochthonous units as a whole influenced the exhumation of deep-seated continental crust, the transference of the suture zone over Gondwana, and the re-equilibration of the resulting overthickened crust.     

欧洲大陆岩石圈动力学研究现状与进展

通过对ＥＵＲＯＰＲＯＢＥ计划中５个关键项目的主要研究目标和主要成果的介绍,简述了欧洲大陆岩石圈动力学研究现状及进展。通过研究,人们已以轾芬诺斯堪的亚地盾古元古代、太古代岩石圈演化特征有明显不同;横跨欧洲的缝合带既是前寒武纪地壳显一宙重新活动的结果,也是加里东和华力西地体增生作用的结果,乌拉尔造山带是古生代微大陆碎块进一步裂解、崩解、增生到东欧在陆边缘的结果;侏罗纪到现代的非洲－－阿拉伯板块及其间的     

Crustal structure of the southern Dabie ultrahigh-pressure orogen and Yangtze foreland from deep seismic reflection profiling

A new 140‐km‐long seismic reflection profile provides a high‐resolution crustal‐scale image of the southern Dabieshan high‐pressure (HP) metamorphic belt and the Yangtze foreland fold‐and‐thrust belt. The seismic image of the stacked section shows that the southern Dabieshan metamorphic terrane and Yangtze foreland belt are separated by a large north‐dipping fault. In the foreland the upper crust is dominated by a series of folds and thrusts formed during the collisional stage in the mid‐Triassic; it was reworked by crustal extension resulting in the formation of a late Jurassic and Cretaceous red‐bed basin. The southern Dabieshan profile shows stacked crustal slabs developed along the margin of the collisional orogenic belt. The Moho reflectors at 10–11 s (～30–33 km) are seismically prominent and segmented by a number of south‐verging thrusts that were probably developed by foreland‐directed thrusting of the deeply subducted continental crust during exhumation. The seismic reflection profile suggests that structures related to the Triassic–Jurassic subduction and exhumation of the Yangtze plate are preserved despite the severe crustal extension superimposed during the late Mesozoic and Cenozoic.     

华北地块南部巨型陆内俯冲带与秦岭造山带岩石圈现今三维结构

豫西横穿秦岭造山带的反射地震为主的综合地球物理探测，发现秦岭现今北界存在华北地块南部自北向南向秦岭的巨型陆内俯冲带，深达Ｍｏｈｏ面以下，与之相伴而生，在中上地壳发育自南向北的逆冲推构造带，千公里东西向延伸，主要发生于晚白垩世１００Ｍａ±，成为秦岭与华北地区块间中新生代重要陆内构造，它是秦岭造山带岩石圈现今三维结构的基本要素和组成部分，秦岭造山带岩石圈现今结构具有流变学分层的“立交桥”三维结构框架模型。显然它们具有统一的动力学背景，是秦岭造山带现今处于印度－青藏、太平洋和欧亚板块的西伯利亚地块等三大构造动力学体系复合部位，导致其从深部地幔动力学的最新调整到上部地壳响应所发生的壳幔等圈层相互作用的综合产物，可能是大陆长期保存、演化的主要途径与形式之一，具有重要的大陆动力学意义，对中国大陆构造、灾害、环境研究也具重要意义。     

南天山区域大地构造与演化

塔里木和中天山之间的南天山造山带,经历了复杂的构造演化与地壳增生过程。综合分析南天山造山带的构造、地层、古生物、岩石、地球化学和同位素年代学等方面的资料,特别是放射虫、蛇绿岩、蓝片岩等方面的最新研究成果,讨论了南天山的区域构造格局和演化过程。南天山主体为一上百公里宽的增生-碰撞混杂带-南天山(蛇绿)混杂带;其北侧为中天山岛弧,是仰冲壳楔;南侧为塔里木陆块,是俯冲壳楔。古南天山洋为一广阔的大洋,南天山碰撞造山作用起始于二叠纪末-三叠纪初,新近纪-第四纪进入陆内造山作用阶段。     

柴北缘-东昆仑地区的造山型金矿床

柴北缘－东昆仑是中国西部秦祁昆褶皱山系的一部分，它的显生宙造山经历了加里东和晚华力西－印支两个旋回，并以多岛洋／裂陷槽、软碰撞和多旋回造山为特点。该区已发现多个造山型金矿床，它们具有相似的地质－地球化学特征。有两组成矿年龄：一是是加里东期（相当于加里东造山晚期）；二是晚华力西－印支期（处于该造山旋回晚期）。前期为性地中地壳顶部－上地壳底部的金矿化，后期则形成于较浅层次（1．2－5．7km）的金矿体侵位自区域北部向南部，矿床元素组合由Au-As向Au-Sb转化，金矿成矿年龄由老变新，成矿深度相应变浅。研究认为，与碰撞有关的热事件以及逐步升高地热增温率，驱动被加热的建造水和大气降水流体沿碰撞带和大型剪切等长距离地迁移、活动，并淋取围岩的成矿元素，形成含金流体。在进入到矿床或矿体构造后，由于构造性质转换，物理化学条件亦随之改变，含金流体沉淀，形成金矿体。这些金矿形成于造山晚期，是造山作用的产物，后者为前者提供了空间、热－动力条件。     

海南岛后地台造山-造盆模型:火成岩地球化学制约

海南岛自海西运动晚幕之后进入后地台活化或地洼阶段，并经历了晚海西-印支期挤压（碰撞）造山、地壳隆起和燕山期以来的块断型造山-造盆作用的过程。火成岩研究资料表明，海南岛地区在晚海西-印支运动期间曾形成一个具有加厚陆壳的后地台造山带；燕山晚期开始出现的裂陷作用是在仍有山根（约60km厚的陆壳）存在的条件下造山带拉伸塌陷阶段的产物；岩石圈底层剥离与地壳山根的去除并最终导致了海南及其邻区从大陆型壳体向陆缘扩张带型壳体的转化。