Cold–wet spells in mainland China during 1951–2011

Two types of persistent extreme weather events, the cold–wet spell (CWS) and the persistent wet-freezing event (PWFE), are defined by considering the persistence of both extreme low temperature (ELT) and precipitation. Regional CWS and PWFE are identified based on temporal persistence and spatial contiguity of single-station-based CWS event and PWFE, respectively. Relevant factors are further discussed to reveal the features of spatial distribution and temporal variability of such events. The results indicate that: (1) station-based CWSs are mostly observed in southern China, especially in eastern part of southwest China and south China. PWFEs are relatively frequently observed immediate south of middle reach of the Yangtze River. Both CWS and PWFE of longer duration are frequently observed in the northern part of the Yunnan–Guizhou Plateau. Further analyses indicate that the occurrence of these events in southern China is positively related to elevation. (2) A total of 48 regional CWSs and 21 regional PWFEs are identified during cold season over 1951–2011 in China. The long-lasting ELT and rainy (snowy)/freezing condition render the event in southern China in 2008, the most severe one in the last five decades. (3) Precipitation is the limitation condition for the occurrence of CWS and PWFE in northern China, while ELT is the dominant factor for CWS and PWFE in southern China.     

Division of tectonic–strata superregions in China

The continent of China is grouped into Pan–Cathaysian blocks, Laurasia and Gondwana Continental margins and relics of three oceans-Paleoasian, Tethys, and Pacific as a whole. In detail, the continent of China grew up by coalescence of three blocks or platforms (North China, Tarim and Yangtze) and eight orogenic belts (Altay–Inner Mongolia–Daxinganling, Tianshan–Junggar–Beishan, Qinling–Qilian– Kunlun, Qiangtang–Sanjiang, Gangdisê, Himalaya, Cathaysia, Eastern Taiwan) during the processes of oceanic crust disappearance and acceretionary-collision of continental crusts. In the orogenic belts, six convergent crustal consumption zones (Ertix–Xar Moron, South Tianshan, Kuanping–Foziling, Bangong co–Shuanghu–Nujiang–Changning–Menglian, Yarlung–Tsangpo, Jiangshao–Chenzhou–Qinfang) have been distinguished. Correspondingly, the strata of the continent of China are subdivided into 17 tectonic-strata superregions, which tectonically belong to three blocks or platforms, six convergent crustal consumption zones and eight orogenic series, respectively. This division is based mainly on differences of tectonic environment and tectonic evolution among blocks, zones and belts, including the timing of when the oceanic crusts transferred into continental crusts, the paleobiogeographic features, and the types of strata.     

Natural disasters in China: 1900–2011

China is a country prone to high frequency of natural catastrophic events. According to the natural disaster data from 1900 to 2011, the major disaster types include drought, earthquake, epidemic, extreme temperature, flood, mass movement wet and storm. The occurrence of natural disaster and economic loss is increased during the studied period. However, the death toll induced by natural disaster is decreased significantly. A new frame of social development and natural disaster is proposed to discuss the impact of population and GDP on the influence of disaster through the recording and reduction efforts. The results indicated that economic development contributes to the reduction in the impact of natural disaster on the people lives and society. New comprehensive integrated management, including international cooperation, should be established.

     

China’s container-related dynamics, 1990–2005

This study seeks to gauge how far China’s container-related dynamics between 1990 and 2005 fit into the wider perspective about transport and development within developing countries. In particular, attention is focussed on the role of specific modes to determine the extent of the penetration of containers within China. Before addressing these key issues extant models relating to an understanding of port and transport evolution in less-developed countries are recalled, synthesized and used as a base upon which an appropriate review of China’s case can be conducted. Applying them to China’s northern, central and southern port ranges not only helps assess the efficacy of these models but also highlights the contribution of individual modes.

As–Sb–Bi–Au mineralization in the Baogutu gold deposit,Xinjiang, NW China

Here we report the occurrence of some uncommon mineral assemblages including pääkönenite, aurostibite, native arsenic, native antimony, and native bismuth found in the Baogutu gold deposit in the western Junggar, Xinjiang, NW China. The mineralization could be generally subdivided into two types: the gold-bearing quartz-vein type mineralization and disseminated mineralization in the wall rocks. The sulfide minerals in gold lodes commonly include pyrite, arsenopyrite, marcasite, and stibnite. However, the L7 lode in No. 4 orebody and the L1 lode in No. 11 orebody of the Baogutu gold deposit are quite different in terms of their mineral assemblages. The L7 lode contains native arsenic–quartz veins in shallow levels and stibnite–quartz veins at depth. Gold-bearing minerals (electrum, native gold, and rarely aurostibite) mainly coexist with pääkönenite, stibnite, native arsenic, and native antimony. The crystallization of As- and Sb-bearing minerals was likely to have consumed H₂S from the hydrothermal fluid, which probably triggered the precipitation of native gold. The L1 lode consists of several discontinuous sulfide-dominated lensoid orebodies. The massive sulfide ores that produced most of the gold resource are characterized by an intimate association between native bismuth and native gold mineralization.     

Paleoproterozoic crustal evolution of the Hengshan–Wutai–Fuping region, North China Craton

An arguable point regarding the Neoarchean and Paleoproterozoic crustal evolution of the North China Craton（NCC）is whether the tectonic setting in the central belt during the mid-Paleoproterozoic（2.35-2.0 Ga）was dominated by an extensional regime or an oceanic subduction-arc regime.A review of the midPaleoproterozoic magmatism and sedimentation for the Hengshan-Wutai-Fuping region suggests that a back-arc extension regime was dominant in this region.This conclusion is consistent with the observation that the 2.35-2.0 Ga magmatism shows a typical bimodal distribution where the mafic rocks mostly have arc affinities and the acidic rocks mainly comprise highly-fractioned calc-alkaline to alkaline（or A-type）granites,and that this magmatism was coeval with development of extensional basins characteristic of transgressive sequences with volcanic interlayers such as in the Hutuo Group.Although the final amalgamation of the NCC was believed to occur at ～1.85 Ga,recent zircon U-Pb age dating for mica schist in the Wutai Group suggests a collisional event may have occurred at ～1.95 Ga.The metamorphic ages of ～1.85 Ga,obtained mostly from the high-grade rocks using the zircon U-Pb approach,most probably indicate uplifting and cooling of these high-grade terranes.This is because（i）phase modeling suggests that newly-grown zircon grains in highgrade rocks with a melt phase cannot date the age of peak pressure and temperature stages,but the age of melt crystallization in cooling stages;（ii）the metamorphic P-T paths with isobaric cooling under 6-7 kb for the Hengshan and Fuping granulites suggest their prolonged stay in the middle-lower crust;and（iii）the obtained metamorphic age data show a continuous distribution from 1.95 to 1.80 Ga.Thus,an alternative tectonic scenario for the Hengshan-Wutai-Fuping region involves：（i）formation of a proto-NCC at ～2.5 Ga;（ii）back-arc extension during 2.35-2.0 Ga resulting in bimodal magmatism and sedimentation in rifting basins on an Archean basement;?     

2015–2020 Geological Survey Program of China Geological Survey Bureau

正On 1–5 September 2014,the China Geological Survey Bureau held a 2015–2020 Geology and Mineral Resources Investigation and Assessment Special Planning and Deployment Meeting to plan the next six years in order to invest nearly ten billion US dollars to implement 9 programs and 50 projects with the aim of developing geological survey work,and to play a leading role in ensuring sustained and stable development.1 The Land Energy and Mines Geological Survey Program     

In–situ LA–ICP–MS trace elemental analyzes of magnetite: The Tieshan skarn Fe–Cu deposit,Eastern China

The Tieshan Fe–Cu deposit is located in the Edong district, which represents the westernmost and largest region within the Middle–Lower Yangtze River Metallogenic Belt (YRMB), Eastern China. Skarn Fe–Cu mineralization is spatially associated with the Tieshan pluton, which intruded carbonates of the Lower Triassic Daye Formation. Ore bodies are predominantly located along the contact between the diorite or quartz diorite and marbles/dolomitic marbles. This study investigates the mineral chemistry of magnetite in different skarn ore bodies. The contrasting composition of magnetite obtained are used to suggest different mechanisms of formation for magnetite in the western and eastern part of the Tieshan Fe–Cu deposit. A total of 178 grains of magnetite from four magnetite ore samples are analyzed by LA–ICP–MS, indicating a wide range of trace element contents, such as V (13.61–542.36 ppm), Cr (0.003–383.96 ppm), Co (11.12–187.55 ppm) and Ni (0.19–147.41 ppm), etc. The Ti/V ratio of magnetite from the Xiangbishan (western part of the Tieshan deposit) and Jianshan ore body (eastern part of the Tieshan deposit) ranges from 1.32 to 5.24, and 1.31 to 10.34, respectively, indicating a relatively reduced depositional environment in the Xiangbishan ore body. Incorporation of Ti and Al in magnetite are temperature dependent, which hence propose that the temperature of hydrothermal fluid from the Jianshan ore body (Al = 3747–9648 ppm, with 6381 ppm as an average; Ti = 381.7–952.0 ppm, with 628.2 ppm as an average) was higher than the Xiangbishan ore body (Al = 2011–11122 ppm, with 5997 ppm as an average, Ti = 302.5–734.8, with 530.8 ppm as an average), indicating a down–temperature precipitation trend from the Jianshan ore body to the Xiangbishan ore body. In addition, in the Ca + Al + Mn versus Ti + V diagram, magnetite is plotted in the skarn field, consideration with the ternary diagram of TiO₂–Al₂O₃–MgO, proposing that the magnetite ores are formed by replacement, instead of directly crystallized from iron oxide melts, which provide a better understanding regarding the composition of ore fluids and processes responsible for Fe mineralization in the Tieshan Fe–Cu deposit.     

K–Ar ages of plutonism and mineralization at the Shizhuyuan W–Sn–Bi–Mo deposit,Hunan Province,China

The Qianlishan granite complex, situated 16 km southeast of Chenzhou City, Hunan Province, China, hosts the Shizhuyuan W–Sn–Bi–Mo deposit. This complex, which intruded the Protozoic metasedimentary rocks and the Devonian clastic sedimentary and carbonate rocks, consists of mainly medium- to coarse-grained biotite granites and minor amounts of fine-grained biotite granite in addition to granite and quartz porphyry. K–Ar ages suggest three episodes of plutonism: the medium- to coarse-grained biotite granite (before 152 Ma), the fine-grained biotite granite (137 Ma), and the granite porphyry (129–131 Ma). Muscovite ages of the greisen are 145–148 Ma, suggesting that the W–Sn–Bi–Mo mineralization was related to the main, medium- to coarse-grained biotite granites. The K–Ar age of the hydrothermal vein mineralization is 92 Ma and is probably related to the porphyries.     

The 144–140 Ma Mafic Dykes in North China and Northeast China Indicating Regional Extensional Tectonic Setting

<正>Objective Previous studies indicate that the North China Craton(NCC)had undergone the loss of thickened lithosphere and fundamental change of physical and chemical property of lithospheric mantle(the destruction of NCC)during the Mesozoic.The peak period of the destruction of NCC is estimated to be 130 Ma,accompanied by widespread metamorphic core complex,rift basins,A-type     

Geological and C–O–S–Pb–Sr isotopic constraints on the origin of the Qingshan carbonate-hosted Pb–Zn deposit,Southwest China

Located in the western Yangtze Block, the Qingshan Pb–Zn deposit, part of the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic province, contains 0.3 million tonnes of 9.86 wt.% Pb and 22.27 wt.% Zn. Ore bodies are hosted in Carboniferous and Permian carbonate rocks, structurally controlled by the Weining–Shuicheng anticline and its intraformational faults. Ores composed of sphalerite, galena, pyrite, dolomite, and calcite occur as massive, brecciated, veinlets, and disseminations in dolomitic limestones.

The C–O isotope compositions of hydrothermal calcite and S–Pb–Sr isotope compositions of Qingshan sulphide minerals were analysed in order to trace the sources of reduced sulphur and metals for the Pb–Zn deposit. δ¹³C_PDB and δ¹⁸O_SMOW values of calcite range from –5.0‰ to –3.4‰ and +18.9‰ to +19.6‰, respectively, and fall in the field between mantle and marine carbonate rocks. They display a negative correlation, suggesting that CO₂ in the hydrothermal fluid had a mixed origin of mantle, marine carbonate rocks, and sedimentary organic matter. δ³⁴S values of sulphide minerals range from +10.7‰ to +19.6‰, similar to Devonian-to-Permian seawater sulphate (+20‰ to +35‰) and evaporite rocks (+23‰ to +28‰) in Carboniferous-to-Permian strata, suggesting that the reduced sulphur in hydrothermal fluids was derived from host-strata evaporites. Ores and sulphide minerals have homogeneous and low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.561 to 18.768, ²⁰⁷Pb/²⁰⁴Pb = 15.701 to 15.920, and ²⁰⁸Pb/²⁰⁴Pb = 38.831 to 39.641) that plot in the upper crust Pb evolution curve, and are similar to those of Devonian-to-Permian carbonate rocks. Pb isotope compositions suggest derivation of Pb metal from the host rocks. ⁸⁷Sr/⁸⁶Sr ratios of sphalerite range from 0.7107 to 0.7136 and (⁸⁷Sr/⁸⁶Sr)_200Ma ratios range from 0.7099 to 0.7126, higher than Sinian-to-Permian sedimentary rocks and Permian Emeishan flood basalts, but lower than Proterozoic basement rocks. This indicates that the ore strontium has a mixture source of the older basement rocks and the younger cover sequence. C–O–S–Pb–Sr isotope compositions of the Qingshan Pb–Zn deposit indicate a mixed origin of the ore-forming fluids and metals.     

Mineralization and fluid evolution of the Jiyuan polymetallic Cu–Ag–Pb–Zn–Au deposit,eastern Tianshan,NW China

The newly discovered Jiyuan Cu–Ag–(Pb–Zn–Au) deposit is located in the southern section of the eastern Tianshan orogenic belt, Xinjiang, northwestern China. It is the first documented deposit in the large Aqikekuduke Ag–Cu–Au belt in the eastern Tianshan orogen. Detailed field observations, parageneses, and fluid inclusion studies suggest an epithermal ore genesis for the main Cu–Ag mineralization, accompanied by a complicated hydrothermal alteration history most likely associated with the multi-stage tectonic evolution of the eastern Tianshan. The Jiyuan Cu–Ag ore bodies are located along the EW-striking, south-dipping Aqikekuduke fault and are hosted by Precambrian marble and intercalated siliceous rocks. Early-stage skarn alteration occurred along the contact zone between the marble layers and Early Carboniferous diorite–granodiorite and monzogranite intrusions; the skarns are characterized by diopside–tremolite–andradite–pyrite–(magnetite) assemblages. Local REE-enriched synchysite–rutile–arsenopyrite–(clinochlorite–microcline–albite) assemblages are related to K–Na alteration associated with the monzogranite intrusions and formed under conditions of high temperature (310°C) and high salinity (19.9 wt.% NaCl). Subsequent hydrothermal alteration produced a series of quartz and calcite veins that precipitated from medium- to low-temperature saline fluids. These include early ‘smoky’ quartz veins (190°C; 3.0 wt.% NaCl) that are commonly barren, coarse-grained Cu–Ag mineralized quartz veins (210°C; 2.4 wt.% NaCl), and late-stage unmineralized calcite veins (140°C; 1.1 wt.% NaCl). Tremolite and Ca-rich scapolite veins formed at an interval between early and mineralized quartz veins, indicating a high-temperature, high-salinity (>500°C; 9.5 wt.% NaCl) Ca alteration stage. Fluid mixing may have played an important role during Cu–Ag mineralization and an external low-temperature Ca-rich fluid is inferred to have evolved in the ore-forming system. The Jiyuan auriferous quartz veins possess fluid characteristics distinct from those of the Cu–Ag mineralized quartz veins. CO₂-rich fluid inclusions, fluid boiling, and mixing all demonstrate that these auriferous quartz veins acted as hosts for the orogenic-type gold mineralization, a common feature in the Tianshan orogenic belt.     

Origin of the Dexing Cu-bearing porphyries,SE China: elemental and Sr–Nd–Pb–Hf isotopic constraints

The Dexing porphyry copper deposit, part of the circum-Pacific porphyry copper ore belt, is the largest porphyry copper deposit in China. We present new LA–ICP–MS zircon U–Pb and molybdenite Re–Os dating, bulk-rock elemental and Sr–Nd–Pb isotopic as well as in situ zircon Hf isotopic geochemistry for these ore-bearing porphyries, in an attempt to better constrain their petrogenesis. LA–ICP–MS zircon U–Pb dating shows that the Dexing porphyries were emplaced in the early Middle Jurassic (～171 Ma); molybdenite Re–Os dating indicates that the associated Cu–Mo mineralization was contemporaneous (～171 Ma) with the igneous intrusion. The rocks are mainly high-K calc-alkaline and show adakitic affinities, including high Sr and low Y and Yb contents, high Sr/Y and La/Yb ratios, and high Mg# (higher than pure crustal melts). These porphyries have initial ⁸⁷Sr/⁸⁶Sr ratios of 0.7044?0.7047, ?_Nd(T) values of –1.5 to?+0.6, and ?_Hf(T) (in situ zircon) values of?+2.6 to?+4.6. They show unusually radiogenic Pb isotopic compositions with initial ²⁰⁶Pb/²⁰⁴Pb ratios up to 18.41 and ²⁰⁷Pb/²⁰⁴Pb up to 15.61. These isotopic compositions are distinctly different from either Pacific MORB or Yangtze lower crust but are similar to the subducting sediments in the western Pacific trenches. Detailed elemental and isotopic data suggest that the Dexing porphyries were emplaced in a continental arc setting coupled with westward subduction of the palaeo-Pacific plate. Partial melting involved the subducted slab (mainly the overlying sediments), with generated melts interacting with the lithospheric mantle wedge, thereby forming the investigated high-K calc-alkaline porphyry magmas.     

Characteristics and Classification of the Geothermal Gradient in the Beijing–Tianjin–Hebei Plain,China

Mathematical Geosciences - Study of the characteristics and classification of geothermal gradients can effectively guide the exploration and development of geothermal resources. In this paper, we...     

Origin of the Yinshan epithermal-porphyry Cu–Au–Pb–Zn–Ag deposit,southeastern China: insights from geochemistry,Sr–Nd and zircon U–Pb–Hf–O isotopes

The Yinshan deposit is a large epithermal-porphyry polymetallic deposit, and the timing and petrogenesis of ore-hosting porphyries have been hotly debated. We present new results from geochemical, whole-rock Sr–Nd and zircon U–Pb–Hf–O isotopic investigations. Zircon U–Pb data demonstrate that the quartz porphyry, dacitic porphyry, and quartz dioritic porphyry formed at ?172.2 ± 0.4 Ma, ?171.7 ± 0.5 Ma, and ?170.9 ± 0.3 Ma, respectively. Inherited zircon cores show significant age spreads from ?730 to ?1390 Ma. Geochemically, they are high-K calc-alkaline or shoshonitic rocks with arc-like trace element patterns. They have similar whole-rock Nd and zircon Hf isotopic compositions, yet an increasing trend in ?_Nd(t) and ?_Hf(t) values typifies the suite. Older (inherited) zircons of the three porphyries display Hf compositions comparable to those of the Jiangnan Orogen basement rocks. In situ zircon oxygen isotopic analyses reveal that they have similar oxygen isotopic compositions, which are close to those of mantle zircons. Moreover, a decreasing trend of δ¹⁸O values is present. We propose that the ore-related porphyries of the Yinshan deposit were emplaced contemporaneously and derived from partial melting of Neoproterozoic arc-derived mafic (or ultra-mafic) rocks. Modelling suggests that the quartz porphyries, dacitic porphyries, and quartz dioritic porphyries experienced ?25%, ?10%, and ?10% crustal contaminations by Shuangqiaoshan rocks. Our study provides important constraints on mantle–crust interaction in the genesis of polymetallic mineralization associated with Mesozoic magmatism in southeastern China.     

Early Precambrian tectono-thermal events: coupled U–Pb–Hf of detrital zircons from Jiao–Liao–Ji Belt,North China Craton

The Dashiqiao Formation on the Liaodong Peninsula constitutes an important component within the Jiao–Liao–Ji Belt, North China Craton. It is composed dominantly of dolomitic marbles intercalated with minor carbonaceous slates and mica schists, hosting one of the largest magnesite deposits on Earth. This study presents zircon cathodoluminescence (CL) images and U–Pb–Hf isotope data, as well as single-mineral geochemical data for the staurolite–garnet–mica schist from the Dashiqiao Formation, in order to constrain its protolith age and provenance, and further to discuss the early Precambrian tectono-thermal events of the North China Craton. U–Pb isotopic dating using the LA–ICP–MS method on detrital zircons from the schist preserves at least three age populations ranging in age from 2.99 to 2.02 Ga, and grains as old as ca 4087 Ma. The dominant Neoarchean detrital zircons were most probably sourced from the basement within the Longgang and Nangrim blocks, while the minor Mesoarchean zircons were only sourced from the Longgang Block. The subordinate middle Paleoproterozoic zircons are consistent with ages of the regionally distributed coeval Liaoji granites and volcanics within the Jiao–Liao–Ji Belt. Zircon U–Pb dating yields a metamorphic age of 1930 Ma for the sample, interpreted to represent the peak stage of epidote amphibolite facies metamorphism. Thus, the depositional age for the protolith of the schist was proposed in the period between 2.01 and 1.93 Ga. LA–MC–ICP–MS Lu–Hf isotopic data show that all Archean (2.45–2.55) detrital zircons possess positive ε_Hf(t) values from +?0.7 to +?7.5 with juvenile depleted mantle model ages, suggesting a significant crustal growth event during the Neoarchean in the North China Craton. The Paleoproterozoic detrital zircons possess variable ε_Hf(t) values (??5.5–+?8.3) and depleted mantle model ages from Mesoarchean to Paleoproterozoic. The zircons with negative ε_Hf(t) values implies the Mesoarchean to Neoarchean crust undergoing a recycling event in the period 2.40–2.01 Ga, while those with positive ε_Hf(t) value suggest some indication of juvenile addition to the crust during the Paleoproterozoic. Using regional geological and new detrital zricon U–Pb–Hf isotopic data, the early Precambrian tectono-thermal events can be subdivided into the following episodes: Mesoarchean, late Neoarchean, middle Paleoproterozoic, and late Paleoproterozoic times.     

Zircon U–Pb and molybdenite Re–Os geochronology of copper–molybdenum deposits in southeast Liaoning Province,China

ABSTRACT

Liaoning Province in China is an area known for the occurrence of numerous copper and/or molybdenum deposits of variable size. However, the age of mineralization and tectonic setting in this region are still a subject of debate. In this study we describe the geology of these deposits and apply zircon U–Pb and molybdenite Re–Os isotopic dating to constrain their ages and define the metallogenic epochs of this province. The Huatong Cu–Mo deposit yields molybdenite Re–Os model ages of 127.6–126.3 Ma and an isochron age of 127.4 ± 0.7 Ma. The Dongbeigou Mo deposit yields molybdenite Re–Os model ages of 132.6–127.1 Ma, an isochron age of 128.1 ± 5.1 Ma, and a zircon U–Pb age of 129.4 ± 0.3 Ma for the associated monzogranite. The granodiorite associated with the Wanbaoyuan Cu–Mo deposit yields a zircon U–Pb age of 128.4 ± 1.1 Ma; the plagiogranite associated with the Yaojiagou Mo deposit yields an age of 167.5 ± 0.9 Ma; and the biotite–plagioclase gneiss from the Shujigou Cu deposit yields an age of 2549.4 ± 5.6 Ma. These results, together with previous geochronology data, show that intense Cu–Mo porphyry and skarn mineralization were coeval with Early–Middle Jurassic and Early Cretaceous granitic magmatism. The former was associated with the orogeny that followed the collision of the Siberian and North China plates and the resulting closure of the palaeo-Asian Ocean, and the latter with rifting that followed the subduction of the palaeo-Pacific Plate and associated lithospheric thinning. Volcanogenic massive sulfide Cu deposit. mineralization took place much earlier, in the late Archaean, and was related to continent–continent collision, palaeo-ocean closure, the formation of a united continental landmass, bimodal volcanism, magma emplacement, and subsequent metamorphism and deformation of syn-collisional granites.     

Ore genesis of the Tianbaoshan carbonate-hosted Pb–Zn deposit,Southwest China: geologic and isotopic (C–H–O–S–Pb) evidence

The Tianbaoshan Pb–Zn deposit, part of the Sichuan–Yunnan–Guizhou (SYG) Pb–Zn metallogenic province, is located in the western Yangtze Block and contains 2.6 million tonnes of 10–15 wt.% Pb + Zn metals. Ore bodies occur as vein or tubular types and are hosted in Sinian (late Proterozoic) carbonate rocks and are structurally controlled by the SN-trending Anninghe tectonic belt and NW-trending concealed fractures. The deposits are simple in mineralogy, with sphalerite, galena, pyrite, chalcopyrite, arsenopyrite, freibergite, and pyrargyrite as ore minerals and dolomite, calcite, and quartz as gangue minerals. These phases occur as massive, brecciated, veinlet, and dissemination in dolostone of the upper Sinian Dengying Formation. Hydrogen and oxygen isotope compositions of hydrothermal fluids range from –47.6 to –51.2‰ and –1.7 to +3.7‰, respectively. These data suggest that H₂O in hydrothermal fluids had a mixed origin of metamorphic and meteoric waters. Carbon and oxygen isotope compositions range from –6.5 to –4.9‰ and +19.3 to +20.2‰, respectively. These compositions plot in the field between mantle and marine carbonate rocks with a negative correlation, suggesting that CO₂ in the ore-forming fluids had multiple sources, including the Permian Emeishan flood basalts, Sinian-to-Permian marine carbonate rocks, and organic matters in Cambrian-to-Permian sedimentary rocks. Sulphur isotope compositions range from –0.4 to +9.6‰, significantly lower than Cambrian-to-Permian seawater sulphate (+15 to +35‰) and sulphate (+15 to +28‰) from evaporates in Cambrian-to-Permian strata, implicating that the S was derived from host-strata evaporates by thermal–chemical sulphate reduction. ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb ratios range from 18.110 to 18.596, 15.514 to 15.878, and 38.032 to 39.221, respectively, which plot in field of the upper crust Pb evolution curve, unlike those of Proterozoic basement rocks, Sinian dolostone, Devonian-to-Permian carbonate rocks, and the Permian Emeishan flood basalts, implying complex derivation of Pb metal in the ore-forming fluids. Geological and isotopic studies of the Tianbaoshan Pb–Zn deposit reveal that constituents in the hydrothermal fluids were derived from multiple sources and that fluid mixing was a possible metallogenic mechanism. The studied deposit is not distal magmatic–hydrothermal, sedimentary exhalative (SEDEX), or Mississippi Valley (MVT) types, rather, it represents a unique ore deposit type, named in this article the SYG type.