Dashuigou Tellurium Deposit in Sichuan Province, China: S, C, O, and H Isotope Data and Their Implications on Hydrothermal Mineralization

Abstract: Dashuigou, a unique tellurium‐dominated deposit over the world, is located in the western margin of the Yangtze cra‐ton in southwestern China. It is characterized by high‐grade tellurium accompanied by bismuth, gold, silver, and sulfur, and occurs in the area of less than one km². The mineralization is divided into three stages, i.e. (1) tellurium‐bearing pyrrhotite–pyrite stage, (2) tetradymite stage, and (3) auriferous quartz veins stage. Tellurium mineralization coexisting with bismuth, silver, selenium, and gold predominantly develops in the stage 2, while the stage 1 is enriched only in sulfur and iron, and the stage 3 is very weakly mineralized with gold. The δ³⁴S values of sulfides in the ore of the deposit vary in a narrow range of –3.1 ‐ +2.8 per mil with –3.1 ‐ +2.8 per mil for the stage 1 and –0.5 ‐ +2.1 for the stage 2, showing the isotopic characteristics of mantle derived sulfur. The δ¹³C values of vein dolomites vary from –5.3 to –7.2 per mil, with –5.3 ‐ –6.6 per mil for the stage 1 and –5.3 ‐ –7.2 per mil for the stage 2, which are significantly different from those of surrounding Triassic marble with δ¹³C values of –0.3 ‐ +2.8 per mil, and show characteristics of mantle derived carbon. The δ¹⁸O values of vein dolomites range from +10.2 to +13.1 per mil, which are higher than those of carbonatite, but lower than those of the marble. Their corresponding δ¹⁸O_water values are +0.6 ‐ +3.9 per mil, with +2.7 ‐ +3.8 per mil for the stage 1 and +0.6 ‐ +3.9 per mil for the stage 2. The data implies that these vein carbonates were formed by the mixing fluids of magmatic or mantle source with meteoric or formation water. The δ¹⁸O values of ore‐forming fluids responsible for the formation of vein quartz are estimated to be +3.2 to +6.8, the δD values of inclusion fluids of the quartz are measured to be –54 to –82 per mil. All those stable isotopic data suggest the involvement of the fluids from mantle and/or mantle‐derived magmas through fault system in the forming process of the Dashuigou tellurium deposit.     

四川石棉县大水沟独立碲矿床地质特征

碲在地壳中的丰度极低,仅为0.0006ppm(黎彤,1976),主要作为伴生元素出现于斑岩铜铝)矿床、铜镍硫化物矿床、某些金矿床和块状硫化物犷床中。目前尚未见有独立成型碎矿床的报道。     

Zinc and sulfur isotope variation in sphalerite from carbonate-hosted zinc deposits,Cantabria, Spain

We studied zinc and sulfur isotopes and the chemical composition of sphalerite samples from Picos de Europa (Aliva mine) and sphalerite and hydrozincite samples from La Florida mine, two carbonate-hosted Mississippi Valley-type (MVT) deposits located in northern Spain; despite being close, they are hosted in carbonatic rocks of different ages, Lower Carboniferous and Lower Cretaceous, respectively. The two generations of sphalerite at Picos de Europa show different δ⁶⁶Zn values (stage 1 sphalerite +0.24 per mil and stage 2 sphalerite from ?0.75 to +0.08 per mil). Both generations also differ in the sulfur isotope composition (stage 1 has δ³⁴S?=?+6.6 and stage 2 has δ³⁴S?=??0.9 to +2.9 per mil) and the chemical composition (stage 1 sphalerite, compared to stage 2 sphalerite, is significantly enriched in Pb, As, Mn, Sb, slightly enriched in Ag, Ni, and Cu and depleted in Co, Ga, Tl, Te, Ge, and Sn). We suggest that Zn isotope fractionation was controlled predominantly by pH and T changes. High Zn isotope values reflect rapid precipitation of sphalerite from higher-temperature acidic fluids that carried Zn mostly as chloride species after interaction with carbonate rocks while lower Zn isotope values most likely resulted from a longer precipitation process from fluid at higher pH and decreasing T that carried dominantly Zn sulfide species. At La Florida, sphalerite samples show light ⁶⁶Zn-depleted signatures with δ⁶⁶Zn values from ?0.80 to ?0.01 per mil (mostly between ?0.80 and ?0.24 per mil) and δ³⁴S values from +10.7 to +15.7 per mil without any relationship between the δ⁶⁶Zn and δ³⁴S values. Here, the variation in Zn isotope values is interpreted as related to mixing of fluids from two reservoirs. The Zn was carried by a single deep-seated and higher T (~250–320 °C) fluid, and precipitation took place after mixing with a connate S-rich fluid in a system with mH₂S?>?mZn²⁺ as a result of change in pH, T, and Zn predominant species. The light δ⁶⁶Zn accompanied by heavy δ³⁴S values resulted from fractionation of Zn aqueous sulfides at near-neutral pH and decreasing T. Hydrozincite samples show much heavier δ⁶⁶Zn values (+0.21 to +0.33 per mil), consistent with fractionation during supergene processes.     

Geology and Genesis of the Natalka Gold Deposit,Northeast Russia

The Natalka lode gold deposit, also known as the Matrosov mine, is located in the Magadan region of northeastern Russia at 61° 39′ N, 147° 50′ E. The deposit was discovered in 1943 and production started in 1945. The mine has produced more than 75 metric tons of gold, with an average grade 4 g/metric ton (mt), and has reserves of about 450 mt.

The Natalka deposit occurs along the southwestern flank of the Yana-Kolyma metallogenic belt and is confined to the major, NW-trending Tenka fault. The deposit is hosted by Upper Permian carbonaceous sediments, subjected to greenschist metamorphism. The ore zones occur along a Z-shaped, strike-slip fault zone that extends for about 12 to 13 km. In plan view, the ore zones are about 5 km long and 100 to 200 m wide in the northwest portion, 350 to 400 m wide in the central portion, and 600 m wide in the southeast portion of the deposit.

The main ore minerals are arsenopyrite and pyrite, which comprise about 95% of the sulfides, along with subordinate pyrrhotite, Co-Ni sulfarsenides, sphalerite, chalcopyrite, galena, native gold, ilmenite, and rutile. Scheelite, tetrahedrite, bournonite, boulangerite, and stibnite occur locally. The major gangue mineral is quartz, with subordinate carbonates, feldspars, chlorite, sericite, kaolinite, montmorillonite, and barite. The total sulfide content of the ore zones ranges from 1 to 3%, and in places up to 5%. Native gold occurs as large individual grains ranging from 0.1 to 2.0 mm in diameter, or as fine disseminations in arsenopyrite. The average gold fineness is 750 to 790.

Fluid inclusion studies reveal homogenization temperatures of 150° to 360° C, with mainly liquid and as much as 5% vapor. Two temperature peaks of 280° to 320° C and 180° to 240° C occur in many samples. The δ³⁴S composition of sulfides in orebodies ranges from ?6.3 to ?2.4 per mil and approximates that of sedimentary rock-hosted pyrite. The δ³⁴S values of the ore solutions are interpreted as having been close to that of the sulfide minerals. The δ¹⁸O composition of ore quartz ranges from 13.9 to 14.1 per mil. The calculated δ¹⁸O composition for the ore fluid ranges from 7.1 to 7.3 per mil at 300° C. The δ¹⁸O values of oxygen indicate a quite homogeneous fluid of metamorphic origin.

The sulfur, arsenic, and gold in the ore deposit were mobilized during metamorphism that included transformation of pyrite to pyrrhotite. The PT conditions for this reaction are estimated at about 400°C and 2.5 kbar, approximately at the biotite isograd. Associated decarbonatization and dehydration reactions produced much of the ore fluid. The interaction of ore-fluid sulfur with Fe-bearing silicate and oxide minerals probably caused deposition of sulfide minerals and gold.     

Dating and Fluid Geochemistry of the Sarkobu Gold Deposit in Altay, Xinjiang, China

The dating of fluid inclusions of quartz yields an Ar-Ar isochrone age of 320.4±6 Ma. Three types of fluid inclusions have been identified with the homogenization temperature ranging from 157℃ to 362℃. The homogenization temperature consists of two groups. The first group varies from 157℃ to 166℃, and the second from 232℃ to 362℃. Their chemical composition is dominated by Na+-Ca2+-Mg2+ and Cl-. The relative concentration of ions is characteristic by Na+>Ca2+>K+>Mg2+ and C1->SO42-> F-. The δD and δ18O values indicate that the ore-forming fluid originates from mixing of multi-source water. The Sarkobu gold deposit has experienced two mineralization stages: gold was enriched during the volcanic-exhalative-sedimentary process in the early stage, while the gold deposit was finally formed under compression-shearing during the orogenic period.     

Stable carbon isotopes of HCO3− in oil-field waters—implications for the origin of CO2

The δ¹³C values of dissolved HCO₃^? in 75 water samples from 15 oil and gas fields (San Joaquin Valley, Calif., and the Houston-Galveston and Corpus Christi areas of Texas) were determined to study the sources of CO₂ of the dissolved species and carbonate cements that modify the porosity and permeability of many petroleum reservoir rocks. The reservoir rocks are sandstones which range in age from Eocene through Miocene. The δ¹³C values of total HCO₃^? indicate that the carbon in the dissolved carbonate species and carbonate cements is mainly of organic origin.The range of δ¹³C values for the HCO₃^? of these waters is ?20–28 per mil relative to PDB. This wide range of δ¹³C values is explained by three mechanisms. Microbiological degradation of organic matter appears to be the dominant process controlling the extremely low and high δ¹³C values of HCO₃^? in the shallow production zones where the subsurface temperatures are less than 80°C. The extremely low δ¹³C values (< ?10 per mil) are obtained in waters where concentrations of SO₄^2? are more than 25 mg/l and probably result from the degradation of organic acid anions by sulfate-reducing bacteria (SO₄^2? + CH₃COO^? → 2HCO₃^? + HS^?). The high δ¹³C values probably result from the degradation of these anions by methanogenic bacteria (CH₃COO^? + H₂OaiHCO₃^? + CH₄).Thermal decarboxylation of short-chain aliphatic acid anions (principally acetate) to produce CO₂ and CH₄ is probably the major source of CO₂ for production zones with subsurface temperatures greater than 80°C. The δ¹³C values of HCO₃^? for waters from zones with temperatures greater than 100°C result from isotopic equilibration between CO₂ and CH₄. At these high temperatures, δ¹³C values of HCO₃^? decrease with increasing temperatures and decreasing concentrations of these acid anions.     

Geology and ore genesis of the late Paleozoic Heijianshan Fe oxide–Cu (–Au) deposit in the Eastern Tianshan,NW China

The Heijianshan Fe–Cu (–Au) deposit, located in the Aqishan-Yamansu belt of the Eastern Tianshan (NW China), is hosted in the mafic–intermediate volcanic and mafic–felsic volcaniclastic rocks of the Upper Carboniferous Matoutan Formation. Based on the pervasive alteration, mineral assemblages and crosscutting relationships of veins, six magmatic–hydrothermal stages have been established, including epidote alteration (Stage I), magnetite mineralization (Stage II), pyrite alteration (Stage III), Cu (–Au) mineralization (Stage IV), late veins (Stage V) and supergene alteration (Stage VI). The Stage I epidote–calcite–tourmaline–sericite alteration assemblage indicates a pre-mineralization Ca–Mg alteration event. Stage II Fe and Stage IV Cu (–Au) mineralization stages at Heijianshan can be clearly distinguished from alteration, mineral assemblages, and nature and sources of ore-forming fluids.Homogenization temperatures of primary fluid inclusions in quartz and calcite from Stage I (189–370 °C), II (301–536 °C), III (119–262 °C) and V (46–198 °C) suggest that fluid incursion and mixing probably occurred during Stage I to II and Stage V, respectively. The Stage II magmatic–hydrothermal-derived Fe mineralization fluids were characterized by high temperature (>300 °C), medium–high salinity (21.2–56.0 wt% NaCl equiv.) and being Na–Ca–Mg–Fe-dominated. These fluids were overprinted by the external low temperature (<300 °C), medium–high salinity (19.0–34.7 wt% NaCl equiv.) and Ca–Mg-dominated basinal brines that were responsible for the subsequent pyrite alteration and Cu (–Au) mineralization, as supported by quartz CL images and H–O isotopes. Furthermore, in-situ sulfur isotopes also indicate that the sulfur sources vary in different stages, viz., Stage II (magmatic–hydrothermal), III (basinal brine-related) and IV (magmatic–hydrothermal). Stage II disseminated pyrite has δ³⁴S_fluid values of 1.7–4.3‰, comparable with sulfur from magmatic reservoirs. δ³⁴S_fluid values (24.3–29.3‰) of Stage III Type A pyrite (coexists with hematite) probably indicate external basinal brine involvement, consistent with the analytical results of fluid inclusions. With the basinal brines further interacting with volcanic/volcaniclastic rocks of the Carboniferous Matoutan Formation, Stage III Type B pyrite–chalcopyrite–pyrrhotite assemblage (with low δ³⁴S_fluid values of 4.6–10.0‰) may have formed at low fO₂ and temperature (119–262 °C). The continuous basinal brine–volcanic/volcaniclastic rock interactions during the basin inversion (∼325–300 Ma) may have leached sulfur and copper from the rocks, yielding magmatic-like δ³⁴S_fluid values (1.5–4.1‰). Such fluids may have altered pyrite and precipitated chalcopyrite with minor Au in Stage IV. Eventually, the Stage V low temperature (∼160 °C) and low salinity meteoric water may have percolated into the ore-forming fluid system and formed late-hydrothermal veins.The similar alteration and mineralization paragenetic sequences, ore-forming fluid sources and evolution, and tectonic settings of the Heijianshan deposit to the Mesozoic Central Andean IOCG deposits indicate that the former is probably the first identified Paleozoic IOCG-like deposit in the Central Asian Orogenic Belt.     

Geology and Genesis of the Ta'ergou Skarn - Quartz Vein Tungsten Deposit in the North Qilian Caledonian Orogenic Belt, Northwest China

Abstract. The Ta'ergou tungsten deposit in Gansu province, northwestern China, is located in the western part of the North Qilian Caledonian orogen, and consists of scheelite skarn bodies and wolframite quartz veins. The tungsten‐bearing skarn developed by the replacement of carbonate layers intercalated in the Precambrian schist and amphibolite whereas wolframite‐quartz ore veins developed along a group of fractures that cut through horizontal skarns. The Ta'ergou tungsten deposit is genetically related to the Caledonian Yeniutan granodiorite intrusion and occurs ca. 500 m wide in the exo‐contact zone 300 ～ 500 m apart from the intrusion. The granodiorite displays a lower grade of differentiation, low content of SiO₂ and high contents of mafic components. There are three types of fluid inclusions in the wolframite‐quartz vein systems, i. e. aqueous, CO₂‐H₂O and CO₂‐rich. The homogenization temperature of aqueous inclusion ranges from 140 to 380d?C and their salinities from 6.4 to 17.4 equivalent wt% NaCl. Laser Raman spectroscopy shows that the inclusions contain a relatively high content of CO₂. The δ³⁴S values of skarn type sulfides range from +8.1 to +12.7 per mil and those of quartz vein sulfides from +9.3 to +14.9 per mil, similar to sulfides of the granodiorite with from +6.0 to +11.7 per mil. The δ¹⁸O values of quartz are between +10.5 and +13.3 per mil and those of wolframite between +3.4 and +5.1 per mil. The δ¹⁸O water values of ore forming fluids range from +0.6 to +6.4 per mil and suggest the mixture of magmatic fluids with meteoric water formed the ore‐forming fluids. It has been proved that Precambrian strata in the west sector of North Qilian region are enriched in tungsten. We propose the strata were remelted to be tungsten‐granitoid during subduction. The polymetallic tungsten was gradually accumulated into the roof pendants of the granite intrusion by fractional crystallization and then was deposited by hydrothermal fluids during metasomatism and infilling along fractures. On the other hand, the granite intrusion also acted as “heating machine” to make hydrothermal fluids leach out the metals from Precambrian strata and these metals joined the ore‐forming hydrothermal system.     

河北-铅锌矿床的硫同位素研究

本文研究的铅锌矿床在大地构造上位于华北地台燕山沉降带中部马兰峪背斜的北翼。北翼主要出露太古界和上元古界地层。     

Fluid Inclusion, Rare-Earth Element and Stable Isotope Study of Carbonate Minerals from the Pongkor Epithermal Gold–Silver Deposit, West Java, Indonesia

The Pongkor gold–silver deposit is the largest low‐sulfidation epithermal precious metal deposit in Indonesia, and is of Pliocene age. The deposit consists of nine major subparallel quartz–adularia–carbonate veins with very low sulfide content. Vein infill records five paragenetic sequences, dominated by calcite in the early stage and quartz in the later stage of the hydrothermal evolution. Fluid inclusions in hydrothermal calcite and quartz of all stages indicate a temperature ranging from 180 to 220°C and a meteoric water origin (very low salinity close to 0 wt% NaCl equivalent). Carbon isotope data on calcite display a narrow range from ?6.5 to ?3.0‰δ¹³C. The oxygen isotope values have a wider range of +4.6 to +10.1‰δ¹⁸O. The broadly positive correlation of the δ¹³C versus δ¹⁸O plot suggests that the carbon species, which equilibrated during the formation of calcite, is dominated by H₂CO₃ not far from equilibrium with HCO₃^?. The abundance of rare earth and yttrium (REY) in carbonate samples is very low (>REY mostly <2 ppm). However, there is always a positive Eu anomaly, which indicates a deeper fluid reservoir at >250°C.     

Fluid Inclusion and Stable Isotope Study at the Southeastern Martabe Deposit: Purnama,Barani and Horas Ore Bodies,North Sumatra,Indonesia

The Martabe Au–Ag deposit, North Sumatra Province, Indonesia, is a high sulfidation epithermal deposit, which is hosted by Neogene sandstone, siltstone, volcanic breccia, and andesite to basaltic andesite of Angkola Formation. The deposit consists of six ore bodies that occurred as silicified massive ore (enargite–luzonite–pyrite–tetrahedrite–tellurides), quartz veins (tetrahedrite–galena–sphalerite–chalcopyrite), banded sulfide veins (pyrite–tetrahedrite–sphalerite–galena) and cavity filling. All ore bodies are controlled by N–S and NW–SE trending faults. The Barani and Horas ore bodies are located in the southeast of the Purnama ore body. Fluid inclusion microthermometry, and alunite‐pyrite and barite‐pyrite pairs sulfur isotopic geothermometry show slightly different formation temperatures among the ore bodies. Formation temperature and salinity of fluid inclusions of the Purnama ore body range from 200 to 260 C and from 6 to 8 wt.% NaCl equivalent, respectively. Formation temperature and salinity of fluid inclusions of the Barani ore body range from 200 to 220 °C and from 0 to 2.5 wt.% NaCl equivalent and those of the Horas ore body range from 240 to 275 °C and from 2 to 3 wt.% NaCl equivalent, respectively. The Barani and Horas ore bodies are less silicified and sulfides are less abundant than the Purnama ore body. A relationship between enthalpy and chloride content indicates mixing of hot saline fluids with cooler dilute fluids during the mineralization of each of the ore bodies. The δ¹⁸O values of quartz samples from the southeast ore bodies exhibit a wide range from +4.2 to +12.9‰ with an average value of +7.0‰. The δ¹⁸O values of H₂O estimated from δ¹⁸O values of quartz, barite and calcite confirm the oxygen isotopic shift to near meteoric water trend, which support the incorporation of meteoric water. Salinity of the fluid inclusions decrease from >5 wt.% NaCl equivalent in the Purnama ore body to <3 wt.% NaCl equivalent in the Barani ore body, indicating different fluid systems during mineralization. The δ³⁴S values of sulfide and sulfate in Purnama range from ? 4.2 to +5.5‰ and from +1.2 to +26.7‰, those in the Barani range from ? 4.3 to +26.4‰ and from +3.9 to +18.5‰ and those in the Horas ore body range from ? 11.8 to +3.5‰ and from +1.4 to +25.7‰, respectively. The δ³⁴S of total bulk sulfur in southeastern ore bodies (Σδ³⁴S) was estimated to be approximately +6‰. The estimated sulfur fugacity during formation of the Purnama and Horas ore bodies is relatively high. It was between 10^?4.8 and 10^?10.8 atm at 220 to 260 °C. Tellurium fugacity was between 10^?7.8 and 10^?9.5 atm at 260 °C and between 10^?9 and 10^?10.6 atm at 220 °C in the Purnama ore body. The Barani ore body was formed at lower fS₂, lower than about 10^?14 atm at 200 to 220 °C based on the presence of arsenopyrite and pyrrhotite in the early stage, and between 10^?14 and 10^?12 atm based on the existence of enargite and tennantite in the last stage. © 2016 The Society of Resource Geology     

Geological and Geochemical Characteristics of the Zhulazhaga Gold Deposit in Inner Mongolia, China

Located in Alxa Zuoqi (Left Banner) of Inner Mongolia, China, the Zhulazhaga gold deposit is the first largescale gold deposit that was found in the middle-upper Proterozoic strata along the north margin of the North China craton in recent years. It was discovered by the No. l Geophysical and Geochemical Exploration Party of Inner Mongolia as a result of prospecting a geochemical anomaly. By now, over 50 tonnes of gold has been defined, with an average Au grade of 4 g/t. The ore bodies occur in the first lithological unit of the Mesoproterozoic Zhulazhagamaodao Formation (MZF), which is composed mainly of epimetamorphic sandstone and siltstone and partly of volcanic rocks. With high concentration of gold,the first lithological unit of the MZF became the source bed for the late-stage ore formation. Controlled by the interstratal fracture zones, the ore bodies mostly appear along the bedding with occurrence similar to that of the strata. The primitiveore types are predominantly the altered rock type with minor ore belonging to the quartz veins type. There are also some oxidized ore near the surface. The metallic minerals are composed mainly of pyrite, pyrrhotite and arsenopyrite with minor chalcopyrite, galena and limonite. Most gold minerals appear as native gold and electrum. Hydrothermal alterations associated with the ore formation are actinolitization, silicatization, sulfidation and carbonation. A total of 100 two-phase H2O-rich and 7 three-phase daughter crystal-beating inclusions were measured in seven goldbearing quartz samples from the Zhulazhaga gold deposit. The homogenization temperatures of the two-phase H2O-rich inclusions range from 155 to 401℃, with an average temperature of 284℃ and bimodal distributions from 240 to 260℃ and 300 to 320℃ respectively. The salinities of the two-phase H2O-rich inclusions vary from 9.22wt% to 24.30wt% NaCl eqniv, with a mode between 23 wt% and 24wt% NaC1 equiv. Comparatively, the homogenization temperatures of the threephase daughter crystal-beating inclusions vary from 210 to 435℃ and the salinities from 29.13wt% to 32.62wt% NaCl equiv. It indicates that the ore-forming fluid is meso-hypothermal and characterized by high salinity, which is apparently different from the metamorphic origin with low salinity. It suggests a magmatic origin of the gold-bearing fluid. The δ^18O values of quartz from auriferous veins range from 11.9 to 16.3 per mil, and the calculated δ^18OH2O values in equilibrium with quartz vary from 1.06 to 9.60 per mil, which fall between the values of meteoric water and magmatic water. It reflects that the ore-forming fluid may be the product of mixing of meteoric water and magmatic water.Based on geological and geochemical studies of the Zhulazhaga gold deposit, it is supposed that the volcanism in the Mesoproterozoic might make gold pre-concentrate in the strata. The extensive and intensive Hercynian tectono-magmatic activity not only brought along a large number of ore-forming materials, but also made the gold from the strata rework. It can be concluded that the ore bodies were mainly formed in late hydrothermal reworking stage. Compared with typical gold deposits associated with epimetamorphic clastic rocks, the Zhulazhaga deposit has similar features in occurrence of ore bodies, ore-controlling structure, wall-rock alterations and mineral assemblages. Therefore, the Zhulazhaga gold deposit belongs to the epimetamorphic clastic rock type.     

Fluid Inclusions and Hydrogen,Oxygen, and Lead Isotopes of the Antuoling Molybdenum Deposit,Northern Taihang Mountains,China

The Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO₂–H₂O inclusions, and pure CO₂ inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to >500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO₂–H₂O to the NaCl–H₂O system. The δ¹⁸O_H2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and ?117.5‰ to ?134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (²⁰⁸Pb/²⁰⁴Pb, 36.320–37.428; ²⁰⁷Pb/²⁰⁴Pb, 15.210–15.495; ²⁰⁶Pb/²⁰⁴Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.     

Characteristics of Triassic epithermal Au mineralization at the Q prospect,Chatree mining area,Central Thailand

The Chatree deposit is located in the Loei‐Phetchabun‐Nakhon Nayok volcanic belt that extends from Laos in the north through central and eastern Thailand into Cambodia. Gold‐bearing quartz veins at the Q prospect of the Chatree deposit are hosted within polymictic andesitic breccia and volcanic sedimentary breccia. The orebodies of the Chatree deposit consist of veins, veinlets and stockwork. Gold‐bearing quartz veins are composed mainly of quartz, calcite and illite with small amounts of adularia, chlorite and sulfide minerals. The gold‐bearing quartz veins were divided into five stages based on the cross‐cutting relationship and mineral assemblage. Intense gold mineralization occurred in Stages I and IV. The mineral assemblage of Stages I and IV is characterized by quartz–calcite–illite–laumontite–adularia–chlorite–sulfide minerals and electrum. Quartz textures of Stages I and IV are also characterized by microcrystalline and flamboyant textures, respectively. Coexistence of laumontite, illite and chlorite in the gold‐bearing quartz vein of Stage IV suggests that the gold‐bearing quartz veins were formed at approximately 200°C. The flamboyant and brecciated textures of the gold‐bearing quartz vein of Stage IV suggest that gold precipitated with silica minerals from a hydrothermal solution that was supersaturated by boiling. The δ¹⁸O values of quartz in Stages I to V range from +10.4 to +11.6‰ except for the δ¹⁸O value of quartz in Stage IV (+15.0‰). The increase in δ¹⁸O values of quartz at Stage IV is explained by boiling. P_H2O is estimated to be 16 bars at 200°C. The f_CO2 value is estimated to be 1 bar based on the presence of calcite in the mineral assemblage of Stage IV. The total pressure of the hydrothermal solution is approximately 20 bars at 200°C, suggesting that the gold‐bearing quartz veins of the Q prospect formed about 200 m below the paleosurface.     

Genesis of the Bangbu Orogenic Gold Deposit,Tibet: Evidence from Fluid Inclusion,Stable Isotopes,and Ar-Ar Geochronology

The Bangbu gold deposit is a large orogenic gold deposit in Tibet formed during the AlpineHimalayan collision. Ore bodies(auriferous quartz veins) are controlled by the E-W-trending Qusong-Cuogu-Zhemulang brittle-ductile shear zone. Quartz veins at the deposit can be divided into three types: pre-metallogenic hook-like quartz veins, metallogenic auriferous quartz veins, and postmetallogenic N-S quartz veins. Four stages of mineralization in the auriferous quartz veins have been identified:(1) Stage S1 quartz+coarse-grained sulfides,(2) Stage S2 gold+fine-grained sulfides,(3) Stage S3 quartz+carbonates, and(4) Stage S4 quartz+ greigite. Fluid inclusions indicate the oreforming fluid was CO_2-N_2-CH_4 rich with homogenization temperatures of 170–261°C, salinities 4.34–7.45 wt% Na Cl equivalent. δ~(18)Ofluid(3.98‰–7.18‰) and low δDV-SMOW(-90‰ to-44‰) for auriferous quartz veins suggest ore-forming fluids were mainly metamorphic in origin, with some addition of organic matter. Quartz vein pyrite has δ~(34)SV-CDT values of 1.2‰–3.6‰(an average of 2.2‰), whereas pyrite from phyllite has δ~(34)SV-CDT 5.7‰–9.9‰(an average of 7.4‰). Quartz vein pyrites yield 206Pb/204 Pb ratios of 18.662–18.764, 207Pb/204 Pb 15.650–15.683, and ~(208)Pb/204 Pb 38.901–39.079. These isotopic data indicate Bangbu ore-forming materials were probably derived from the Langjiexue accretionary wedge. 40Ar/39 Ar ages for sericite from auriferous sulfide-quartz veins yield a plateau age of 49.52 ± 0.52 Ma, an isochron age of 50.3 ± 0.31 Ma, suggesting that auriferous veins were formed during the main collisional period of the Tibet-Himalayan orogen(~65–41 Ma).     

Stable isotope and fluid inclusion studies on the Mount Black lead‐zinc deposit,southern New South Wales

The Mount Black Pb‐Zn deposit is a quartz‐galena‐sphalerite replacement body in the Silurian Cooleman Limestone. Fluid inclusion homogenisation temperatures range from 120° to 170°C for paragenetically early sphalerite, to 210° to 315°C for late quartz, and 245° to 320°C for calcite from contiguous recrystallised limestone. Fluid salinities increased with rising temperature, during deposition of the minerals, and the fluid composition changed from NaCl‐rich to possibly CaCl₂‐NaCl (‐?MgCl₂)‐rich brines.

δ³⁴S values of sphalerite and galena range from —8.1 to —2.7 per mil, and —13,5 to —4.4 per mil respectively. Although a magmatic source for sulphur is not excluded, it is suggested that most probably the sulphur was derived by biogenic reduction of sea‐water sulphate during diagenesis. Carbon and oxygen isotope data for the Cooleman Limestone range from compositions typical of Silurian marine carbonate in samples distant from the deposit, to fluctuating, but ¹²C‐ and ¹⁶O‐enriched in recrystallised material adjacent to the quartz‐sulphide rocks. ¹²C‐enrichment probably reflects organic carbon oxidation during karst formation, continuing later during limestone recrystallisation and accompanied by ¹⁶O‐enrichment during the action of saline formation waters.

The process of formation of the Mount Black deposit may have been analogous to that of Mississippi Valley‐type deposits, but modified by and/or resulting from, an increasing geothermal gradient caused by nearby synchronous intrusions.     

A sulphur isotopic study of the Navia gold belt (Spain)

The Navia gold belt is located in the West Asturian-Leonese Zone of the Iberian Variscan Orogen. The host rocks of the mineralization are quartzites, sandstones and black shales of Cambro-Ordovician age. The gold belt extends along 35 km and has five major veins: Penedela, Encarnita, Fornaza, Carmina and S. Jose. The ores belong to at least four associations having contrasting mineralogies and textures. The δ³⁴S values for individual mineral phases reflect the polyphase metallogenic history. The older association (Stage 1) is Fe-Mn-rich and is made up of spessartine, grunerite-dannemorite and quartz, with magnetite, pyrrhotite and chalcopyrite as metallic phases. The mineralization of Stage 1 is followed by the As-rich Stage 2 with quartz, arsenopyrite and pyrite. The δ³⁴S values for pyrite range from 14.9 to 19.9 per mil (n = 16), and for arsenopyrite from 13.2 to 17.3 per mil (n = 7). The observed isotopic homogeneity likely implies isotopic equilibrium at the scale of the gold vein. Stage 3 contains a coarse-grained base metal sulphide-rich association. The δ⁴S values for sphalerite range from 16.4 to 20.6 per mil (n= 16), and for galena from 17.0 to 18.7 per mil (n = 11). δ³⁴S_sp > δ³⁴S_gl suggests that the sulphur isotopic fractionation of the ore-forming system had reached equilibrium. The youngest crosscutting mineral association (Stage 4) consists of Pb-Sb sulphosalts, bornite, electrum and quartz. The δ³⁴S values for sulphosalts range from 9.7 to 15.8 per mil, showing the lightest results of the Navia sulphides.The relatively tight clustering of δ³⁴S values of the Au-related sulphides, and the results of fluid inclusions and paragenetic studies, can be interpreted to indicate that the hydrothermal fluids of the last three stages were dominated by H₂S. In the H₂S predominant field, sulphide minerals precipitating from solutions would exhibit δ³⁴S values similar to the δ³⁴S_ΣS value of the ore fluid. The heavy δ³⁴S_ΣS of the Navia fluids is consistent with leaching of sulphur from the host rocks. The main sulphur source could be diagenetic pyrite from the siliciclastic rocks of the Cabos and Luarca Formations, which exhibit δ³⁴S values from 8.3 to 21.2 per mil. An additional sulphur-source in Stage 3 would be the leaching of disseminated sphalerite and galena present in Cambrian carbonates.     

Oxygen and Carbon Isotope Study of Calcite and Dolomite in the Disseminated Au-Ag Telluride Bulawan Deposit, Negros Island, Philippines

Abstract: The disseminated Au‐Ag telluride Bulawan deposit, Negros island, Philippines, is hosted by dacite porphyry breccia pipes which formed in a Middle Miocene dacite porphyry stock. Electrum and Au‐Ag tellurides occur mostly as grains intergrown with or filling voids between sphalerite, pyrite, chalcopyrite, galena and tennantite. Calcite, quartz and rare dolomite are the principal gangue minerals. Four types of alteration were recognized in the deposit, namely; propylitic, K‐feldspar‐sericitic, sericitic and carbonate alteration. Carbonate alteration is correlatable to the gold deposition stage and occurs mostly along fault zones. The δ¹⁸O and δ¹³C compositions of calcite and dolomite in propylite zone and ore‐stage dacite porphyry breccia were determined. The δ¹⁸O values of calcite in propylitized andesite range from +12.2 to +14.7%, and their δ¹³C values range from ‐6.1 to ‐1.0%. The δ¹⁸O values of calcite and dolomite in sericite‐ and carbonate‐altered, mineralized dacite porphyry breccia and dacite porphyry rocks range from +15.1 to +23.1%, and the δ¹³C values of calcite and dolomite range from ‐3.9 to +0.9%. The δ¹⁸O and δ¹³C values of the hydrothermal fluids were estimated from inferred temperatures of formation on the basis of fluid inclusion microthermometry. The δ¹⁸O values of hydrothermal fluid for the propylitic alteration were calculated to be +8.5 ‐ +9.5%, assuming 375°C. On the other hand, the δ¹⁸O values of ore solutions for base metal and Au mineralization were computed to be +13.6 ‐ +14.6%, assuming 270°C. The hydrothermal fluids that formed the Bulawan deposit are dilute and ¹⁸O‐enriched fluids which reacted with ¹⁸O‐ and ¹³C‐rich wallrocks such as limestone.     

Geology,Fluid Inclusion,and Sulfur Isotope Studies of the Chehugou Porphyry Molybdenum–Copper Deposit,Xilamulun Metallogenic Belt,NE China

The Chehugou Mo–Cu deposit, located 56 km west of Chifeng, NE China, is hosted by Triassic granite porphyry. Molybdenite–chalcopyrite mineralization of the deposit mainly occurs as veinlets in stockwork ore and dissemination in breccia ore, and two ore‐bearing quartz veins crop out to the south of the granite porphyry stock. Based on crosscutting relationships and mineral paragenesis, three hydrothermal stages are identified: (i) quartz–pyrite–molybdenite ± chalcopyrite stage; (ii) pyrite–quartz ± sphalerite stage; and (iii) quartz–calcite ± pyrite ± fluorite stage. Three types of fluid inclusions in the stockwork and breccia ore are recognized: LV, two‐phase aqueous inclusions (liquid‐rich); LVS, three‐phase liquid, vapor, and salt daughter crystal inclusions; and VL, two‐phase aqueous inclusions (gas‐rich). LV and LVS fluid inclusions are recognized in vein ore. Microthermometric investigation of the three types of fluid inclusions in hydrothermal quartz from the stockwork, breccia, and vein ores shows salinities from 1.57 to 66.75 wt% NaCl equivalents, with homogenization temperatures varying from 114°C to 550°C. The temperature changed from 282–550°C, 220–318°C to 114–243°C from the first stage to the third stage. The homogenization temperatures and salinity of the LV, LVS and VL inclusions are 114–442°C and 1.57–14.25 wt% NaCl equivalent, 301–550°C and 31.01–66.75 wt% NaCl equivalent, 286–420°C and 4.65–11.1 wt% NaCl equivalent, respectively. The VL inclusions coexist with the LV and LVS, which homogenize at the similar temperature. The above evidence shows that fluid‐boiling occurred in the ore‐forming stage. δ³⁴S values of sulfide from three type ores change from ?0.61‰ to 0.86‰. These δ³⁴S values of sulfide are similar to δ³⁴S values of typical magmatic sulfide sulfur (c. 0‰), suggesting that ore‐forming materials are magmatic in origin.     

Micrometallogeny and hydrothermal fluid evolution of the Iju porphyry Cu deposit,NW Kerman,Iran: Evidence from fluid inclusions,Laser Raman spectroscopy,and SO isotope systematics

The Iju Cu porphyry is located in the NW part of the Kerman Magmatic Copper Belt (KMCB). It is related to a ~ 9 Ma granodiorite porphyry intrusion, with three main stages of hydrothermal activity. The homogenization temperatures for the fluid inclusions are in the ranges of 200–494 °C, and their salinities vary from 4.0 to 42.8 wt% NaCl equiv., which are typical magmatic-hydrothermal fluids. The δ³⁴S values of sulfides range from −0.4 to +3.2 ‰ (V-CDT), and the δ³⁴S values of anhydrite samples range from +11.6 to +16.8 ‰. The δ³⁴S values of sulfides show a narrow range, implying a homogeneous sulfur source. The oxygen isotopic composition of hydrothermal water in equilibrium with quartz samples ranges from +3.4 to +6.0 ‰ (V-SMOW) consistent with the hydrothermal fluids having a magmatic signature, but diluted with meteoric waters in the main mineralizing stage. The most important factors responsible for metal precipitation in the Iju porphyry deposit are fluid boiling, oxygen fugacity decrease and cooling followed by dilution with meteoric water. The primary fluids of the Iju Cu deposit are characterized by relatively high temperature and moderate salinity, and are CO₂-rich, indicating a typical post-collisional porphyry system.