Inversion of long-period body-wave data for the source process of the Gonghe, Qinghai, China earthquake

Long period body waves data recorded by the China Digital Seismograph Network (CDSN) are inverted for the seismic moment tensors of the April 26, 1990, Gonghe, QinghaiM _S=6.9 earthquake and itsM _S=5.0 after-shock occurred on May 7, 1990. In the inversion, the generalized reflection-transmission coefficient matrix method is used to generate Green’s function. From the inversion it is obtained that the rupture process of theM _S=5.0 aftershock is relatively simple, and that of the main shock is rather complex. There are at least two events during main shock rupture process with an interval about 35 seconds. The focal mechanisms of two events are roughly the same as that of the aftershock, all of them were mainly reverse dip-slipping faulting with minor left-lateral strike-slip motion. These results indicate that the Gonghe earthquake was the result of the farther extension of one NWW-SEE striking buried fault on the southern margin of Gonghe basin from shallower depth to deeper depth and from NW to SE under the action of a nearly horizontal NE direction compressive stress. Contribution No. 95A0111, Institute of Geophysics, SSB, China.     

Moment tensor inversion and source rupture process of the September 27, 2003 M S=7.9 earthquake occurred in the border area of China, Russia and Mongolia

We conducted moment tensor inversion and studied source rupture process for M _S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M _S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M _S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M ₀=0.97×10²⁰ N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M _S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.     

2010年玉树地震序列ML≥4.0事件震源机制解特征分析

采用CAP方法反演2010年玉树7.1级地震序列前震、主震及余震19个M_L≥4.0事件的震源机制解,19个结果以走滑类型为主,前震、主震的震源机制解十分接近,反映出前震、主震之间密切的联系;震源深度集中在7~12 km,震源最浅（4.5 km）与最深（34 km）的两个余震事件具有明显的逆冲性质,表现出明显的边界特征;19个事件的震中分布在甘孜-玉树断裂北支玉树-隆宝断裂上,目前已经证明该断裂即为玉树地震的发震构造。自SE-NW沿玉树-隆宝断裂走向拉一剖面,观察震源深度沿剖面的变化情况,可看出玉树-隆宝断裂西北段震源深度要大于东南段,该段主要是余震活动的中后期,因此在地震活动的中后期,余震向地壳深部扩展,断裂累积的应变能得到更进一步的释放;P轴方位角优势分布集中在220°~230°,T轴方位优势分布集中在310°~320°,两个优势分布互相垂直性与单个事件的沙滩球应力轴一样,说明玉树地震的震源机制解类型较为简单;玉树周边地区应力场分布比较均匀,并不像汶川周边地区那么复杂,本次玉树地震为巴颜喀拉地块与羌塘块体边界处甘孜-玉树断裂应变能量的正常释放。     

2015年11月23日青海祁连MS5.2地震震源机制解及发震构造初步探讨

采用CAP（Cut and Paste）方法反演了2015年11月23日青海祁连M_S5.2主震的震源机制解,其最佳双力偶解：节面Ⅰ走向109°、倾角58°、滑动角21°,节面Ⅱ走向8°、倾角72°、滑动角146°,矩震级M_W5.16,矩心震源深度约为9 km。结合震区的活动构造,判定发震断层面为节面Ⅰ,推测托勒山北缘活动断裂中段为此次地震的发震断裂。     

Variation of Q value before and after the 1999 Xiuyan, Liaoning Province, M =5.4 earthquake on the basis of analysis on attenuation dispersion of P waves

A method for determining medium quality factor is developed on the basis of analyzing the attenuation dispersion of the arrived first period P wave. In order to enhance signal to noise ratio, improve the resolution in measurement and reduce systematic error we applied the data resampling technique. The group velocity delay of P wave was derived by using an improved multi-filtering method. Based on a linear viscoelastic relaxation model we deduced the medium quality factor Q _m, and associated error with 95% confidence level. Applying the method to the seismic record of the Xiuyan M=5.4 earthquake sequences we obtained the following result: (1) High Q _m started to appear from Nov. 9, 1999. The events giving the deduced high Q _m value clustered in a region with their epicenter distances being between 32 and 46 km to the Yingkou station. This Q _m versus distance observation obviously deviates from the normal trend of Q _m linearly increasing with distance. (2) The average Q _m before the 29 Dec. 1999 M=5.4 earthquake is 460, while the average Q _m between the M=5.4 event and the 12 Jan. 2000 M=5.1 earthquake is 391, and the average Q _m after the M=5.1 event is 204. Foundation item: State Key Project of Science and Technology during the Tenth Five-year Plan (2004BA601B01-03-01).     

2014年阿拉善块体西缘两次中强地震震源机制解

2014年2月12日新疆于田发生了MS7.3地震,之后在阿拉善块体西缘相继发生了蒙古4.9级、新疆哈密5.1级地震。利用甘肃"十五"数字地震台网的波形资料,采用CAP方法反演这两次地震的震源机制解。结果显示蒙古4.9级地震为走滑型,而新疆哈密5.1级属于逆冲型,表明青藏块体与阿拉善块体之间的作用增强引发了这两次地震活动。     

A Preliminary Analysis of the Seismogenic Structure of the Akto MS6.7 Earthquake Sequence on November 25, 2016

In this study,data from the Xinjiang regional network and IRIS shared global stations are used to relocate the Akto M_S6. 7 earthquake sequence on November 25,2016 by using double difference location method. Three earthquakes of M_S4. 8,M_S6. 7 and M_S5. 0 are inverted by using the g CAP method,and the focal mechanism solutions are obtained.According to the results of relocating,the location of the main shock is 39. 22°N,73. 98°E,the distribution of the earthquake sequence is about 70 km in length,and the focal depth is mainly within the range of 5-20 km. The plane and depth profiles of the earthquake sequence show that aftershocks extended in SEE direction after the main shock and the dip angle of fault plane is steep. Focal mechanism results show that the three earthquakes are characterized by strike-slip movement. Based on the results of field geological investigation,it is inferred that the seismogenic fault of the Akto earthquake is Muji fault,which is located at the northernmost end of the Kongur extensional system.The possible cause of this earthquake is that the Indian Plate continues to push northward,and during this compression process,the Indian Plate is affected by the clockwise rotation of the Tarim basin,which causes the accumulation of right-lateral action of the Muji fault,resulting in this earthquake.     

深井水氡主要干扰因素及映震效能分析

对甘肃省玉门青6井和平凉泾川泾3井两口深水井的水氡及辅助项目观测资料采用多元逐步回归、相关距平、一阶差分等方法进行处理，分析并排除了主要干扰因素，显示出两井在肃南5.4级、托莱6.0级和礼县5.1级地震前有明显异常，对两井的映震效能和地震预报前景进行了评价。     

Fracture characteristics of the 1997 Jiashi, Xinjiang, China, earthquake swarm inferred from source spectra

Broadband P and S waves source spectra of 12 MS5.0 earthquakes of the 1997 Jiashi, Xinjiang, China, earthquake swarm recorded at 13 GDSN stations have been analyzed. Rupture size and static stress drop of these earthquakes have been estimated through measuring the corner frequency of the source spectra. Direction of rupture propagation of the earthquake faulting has also been inferred from the azimuthal variation of the corner frequency. The main results are as follows: ①The rupture size of MS6.0 strong earthquakes is in the range of 10～20 km, while that of MS=5.0～5.5 earthquakes is 6～10 km.② The static stress drop of the swarm earthquakes is rather low, being of the order of 0.1 MPa. This implies that the deformation release rate in the source region may be low. ③ Stress drop of the earthquakes appears to be proportional to their seismic moment, and also to be dependent on their focal mechanism. The stress drop of normal faulting earthquakes is usually lower than that of strike-slip type earthquakes. ④ For each MS6.0 earthquake there exists an apparent azimuthal variation of the corner frequencies. Azimuthally variation pattern of corner frequencies of different earthquakes shows that the source rupture pattern of the Jiashi earthquake swarm is complex and no uniform rupture expanding direction exists.     

Changes in source parameters of foreshocks and aftershocks of the 2001 Ms=6.0 Yajiang,Sichuan, earthquake

In this paper changes in focal mechanisms) parameters of wave spectra, and stress drops for the Ms=5.0 forcshock and Ms=6.0 mainshock in February 2001 in Yajiang County, Sichuan, and seismicity in cpiccntral region are studied. Comparison of focal mechanisms for the Yajiang earthquakes with distribution patterns of aftcrshocks, the nodal plane Ⅰ, striking in the direction of NEN, of the Yajiang M=5.0 event is chosen as the faulting plane, the nodal plane Ⅱ, striking in the direction of WNW, of the M=6.0 event as the faulting plane. The strikes of the two faulting planes are nearly perpendicular to each other. The level of stress drops in the cpicentral region before the occurrence of the M=6.0 earthquake increases, which is consistent with increase of seismicity in the epicentral region. The rate decay of the Yajiang earthquake sequence, changes in wave spectra for foreshocks and aftershocks,and focal mechanisms are complex.     

Moment tensor inversion and source rupture process of the September 27, 2003 <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>=7.9 earthquake occurred in the border area of China,Russia and Mongolia

We conducted moment tensor inversion and studied source rupture process for M _S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M _S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M _S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M ₀=0.97×10²⁰ N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M _S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.     

Earthquake activity in the Aswan region,Egypt

The November 14, 1981 Aswan earthquake (M _L= 5.7), which was related to the impoundment of Lake Aswan, was followed by an extended sequence of earthquakes, and is investigated in this study. Earthquake data from June 1982 to late 1991, collected from the Aswan network, are classified into two sets on the basis of focal depth (i.e., shallow, or deeper than 10 km). It is determined that (a) shallow seismicity is characterized by swarm activity, whereas deep seismicity is characterized by a foreshock-main shock-aftershock sequence; (b) the b value is equal to 0.77 and 0.99 for the shallow and deep sequences, respectively; and (c) observations clearly indicate that the temporal variations of shallow seismic activity were associated with a high rate of water-level fluctuation in Lake Aswan; a correlation with the deeper earthquake sequence, however, is not evident. These features, as well as the tomographic characteristics of the Aswan region (Awad andMizoue, this issue), imply that the Aswan seismic activity must be regarded as consisting of two distinct earthquake groups.We also relocated the largest 500 earthquakes to determine their seismotectonic characteristics. The results reveal that the epicenters are well distributed along four fault segments, which constitute a conjugate pattern in the region. Moreover, fault-plane solutions are determined for several earthquakes selected from each segment, which, along with the 14 November 1981 main shock, demonstrate a prominent E-W compressional stress.     

Characteristics of foreshock and its identi-fication

Introduction The characteristics of generalized foreshock and direct foreshock and their identification,as well as their application to medium and short-term prediction of strong earthquake is a major study objective in seismometry both in China and abroad.China has made many short-term and imminent earthquake predictions.Among the ones with clear hazard-mitigating effect and social manifestation,direct foreshock has made an obvious contribution,for example,the MS=7.2Menglian earthquake occu…     

利用CAP方法和瑞利面波振幅谱联合反演宁强5.3级地震震源深度

2018年9月12日19时6分,陕西省汉中市宁强县发生5.3级地震,不同机构给出的震源深度结果相差较大。为进一步确定宁强5.3级地震的震源深度,基于区域速度模型,首先利用CAP方法反演得到该地震的震源机制解,然后采用瑞利面波振幅谱和CAP深度误差函数联合反演,进一步测定了此次地震的矩心深度。结果显示:CAP方法得到的陕西宁强5.3级地震矩心深度约为12km,瑞利面波振幅谱测定的矩心深度为13km,结合引入的误差函数联合反演,最终确定陕西宁强5.3级地震的矩心深度为13km左右,表明此次地震仍属于发生于上地壳的地震。     

2022年门源MS6.9和2016年门源MS6.4地震序列比较分析

2022年1月8日青海省海北州门源县发生M_S6.9地震,震中距离2016年1月21日门源M_S6.4地震震中约33km,两次门源地震均发生在冷龙岭断裂附近,但在震源机制、主发震断层破裂过程及地震序列余震活动等方面显著不同。针对两次门源地震序列的比较分析,对研究冷龙岭断裂及其附近区域强震序列和余震衰减特征等具有重要研究意义。通过对比分析2022年门源M_S6.9地震和2016年门源M_S6.4地震余震的时空演化特征,发现二者在震源过程和断层破裂尺度上存在明显差异,前者发震断层破裂充分,震后能量释放充分,余震丰富且震级偏高;而后者发震断层未破裂至地表,余震震级水平偏低。综合分析两次门源地震序列表现出来的差异性,认为其可能与地震发震断层的破裂过程密切相关,且同时受到区域构造环境的影响。     

Study of dislocation model and evolution characteristics of vertical deformation field of gonghe M S=6.9 earthquake

The preliminary research results of vertical deformation dislocation model of GongheM _S =6.9 earthquake show that, the causative structure is a hidden fault with strike N60°W, dipping S47°W, which lies near the current subsidence center of Gonghe basin. The rupture length and width are 30km and 14km, the upper and lower bound depth of the fault in width direction are 3km and 17km respectively. The maximum coseismic and preseismic vertical deformation of GongheM _S =6.9 earthquake are 247mm and about 100mm. The reasons why there existed rapid postseismic uplift are also given a tentative discussion. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 289–295, 1993.     

Source process of the 14 November 2001 western Kunlun Mountain M S=8.1 earthquake

Based on digital teleseismic P-wave seismograms recorded by 28 long-period seismograph stations of the global seismic network, source process of the November 14, 2001 western Kunlun Mountain M _S=8.1 (M _W=7.8) earthquake is estimated by a new inversion method. The result shows that the earthquake is a very complex rupture event. The source rupture initiated at the hypocenter (35.95°N, 90.54°E, focal depth 10 km, by USGS NEIC), and propagated to the west at first. Then, in several minutes to a hundred minutes and over a large spatial range, several rupture growth points emerged in succession at the eastern end and in the central part of the finite fault. And then the source rupture propagated from these rupture growth points successively and, finally, stopped in the area within 50 km to the east of the centroid position (35.80°N, 92.91°E, focal depth 15 km, by Harvard CMT). The entire rupture lasted for 142 s, and the source process could be roughly separated into three stages: The first stage started at the 0 s and ended at the 52 s, lasting for 52 s and releasing approximately 24.4% of the total moment; The second stage started at the 55 s and ended at the 113 s, lasting for 58 s and releasing approximately 56.5% of the total moment; The third stage started at the 122 s and ended at the 142 s, lasting for 20 s and releasing approximately 19.1% of the total moment. The length of the ruptured fault plane is about 490 km. The maximum width of the ruptured fault plane is about 45 km. The rupture mainly occurred within 30 km in depth under the surface of the Earth. The average static slip in the underground rocky crust is about 1.2 m with the maximum static slip 3.6 m. The average static stress drop is about 5 MPa with the maximum static stress drop 18 MPa. The maximum static slip and the maximum stress drop occurred in an area within 50 km to the east of the centroid position. Foundation item: Joint Seismological Science Foundation of China (103066) and Foundation of the Seismic Pattern and Digital Seismic Data Application Research Office of Institute of Earthquake Science of the China Earthquake Administration.     

Geomagnetic diurnal-variation anomalies and their relation to strong earthquakes

The diurnal-variation anomalies of the vertical-component in geomagnetic field are mainly the changes of phase and amplitude before strong earthquakes. On the basis of data recorded by the network of geomagnetic observatories in China for many years, the anomalous features of appearance time of the minima of diurnal variations (i.e, low-point time) of the geomagnetic vertical components and the variation of their spatial distribution (i.e, phenomena of low-point displacement) have been studied before over 30 strong earthquakes with M _S≥6.6 such as Kunlunshan M _S=8.1 earthquake on November 14, 2001; Bachu-Jashi M _S=6.8 earthquake on February 24, 2003; Xiaojin M _S=6.6 earthquake on September 22, 1989, etc. There are good relations between such rare phenomena of geomagnetic anomalies and the occurrence of earthquakes. It has been found that most earthquakes occur in the vicinity of the boundary line of sudden change of the low-point displacement and generally within four days before and after the 27th or 41st day counting from the day of appearance of the anomaly. In addition, the anomalies of diurnal-variation amplitude near the epicentral area have been also studied before Kunlunshan M _S=8.1 earthquake and Bachu-Jiashi M _S=6.8 earthquake. Foundation item: National Science Technology Tackle Key Project during the Tenth Five-year Plan (2001BA601B01-05-04)     

基于三维模型中的射线追踪方法测定鲁甸M_s6.5地震震源深度

2014年8月3日云南鲁甸发生M_S6.5地震,造成重大人员伤亡和财产损失。此次地震发震构造复杂,引起了地震学界的广泛关注。本文基于三维建模方法,建立鲁甸地区三维层状非均匀速度模型,采用逐段迭代射线追踪方法对鲁甸M_S6.5地震进行三维射线追踪走时计算;利用震中距150km范围内的近震Pg波震相走时数据,通过射线追踪走时拟合获得鲁甸地震的震源深度约为12km,与前人研究成果基本一致,表明了本文采用的三维建模和射线追踪方法的有效性。     

2017年九寨沟7.0级地震前不同级别地震空区的演化过程分析

结合传统地震学方法与数字地震学方法,回顾总结了日常分析预报中针对九寨沟7.0级地震开展的相关工作,梳理总结了地震前提出的甘东南地震异常信息,进一步讨论了九寨沟地震前中期、短期及临震异常特征。通过分析九寨沟7.0级地震之前区域范围内不同震级活动图像,发现甘青川交界地区5级空区在震前向震中一侧收缩、4级地震超长平静458天、3级空区在震前4天被打破的现象,同时发现,震中附近区域震源机制一致性较高,反映了震源区的高应力水平。