Geology,geochemistry and genesis of the Qianfanling quartz-vein Mo deposit in Songxian County,Western Henan Province,China

The Qianfanling Mo deposit, located in Songxian County, western Henan province, China, is one of the newly discovered quartz-vein type Mo deposits in the East Qinling–Dabie orogenic belt. The deposit consists of molybdenite in quartz veins and disseminated molybdenite in the wall rocks. The alteration types of the wall rocks include silicification, K-feldspar alteration, pyritization, carbonatization, sericitization, epidotization and chloritization. On the basis of field evidence and petrographic analysis, three stages of hydrothermal mineralization could be distinguished: (1) pyrite–barite–quartz stage; (2) molybdenite–quartz stage; (3) quartz–calcite stage.Two types of fluid inclusions, including CO₂-bearing fluid inclusions and water-rich fluid inclusions, have been recognized in quartz. Homogenization temperatures of fluid inclusions vary from 133 °C to 397 °C. Salinity ranges from 1.57 to 31.61 wt.% NaCl eq. There are a large number of daughter mineral-CO₂-bearing inclusions, which is the result of fluid immiscibility. The ore-forming fluids are medium–high temperature, low to moderate salinity H₂O–NaCl–CO₂ system. The δ³⁴S values of pyrite, molybdenite, and barite range from − 9.3‰ to − 7.3‰, − 9.7‰ to − 7.3‰ and 5.9‰ to 6.8‰, respectively. The δ¹⁸O values of quartz range from 9.8‰ to 11.1‰, with corresponding δ¹⁸O_fluid values of 1.3‰ to 4.3‰, and δ¹⁸D values of fluid inclusions of between − 81‰ and − 64‰. The δ¹³C_V-PDB values of fluid inclusions in quartz and calcite have ranges of − 6.7‰ to − 2.9‰ and − 5.7‰ to − 1.8‰, respectively. Sulfur, hydrogen, oxygen and carbon isotope compositions show that the sulfur and ore-forming fluids derived from a deep-seated igneous source. During the peak collisional period between the North China Craton and the Yangtze Craton, the ore-forming fluids that derived from a deep igneous source extracted base and precious metals and flowed upwards through the channels that formed during tectonism. Fluid immiscibility and volatile exsolution led to the crystallization of molybdenite and other minerals, and the formation of economic orebodies in the Qianfanling Mo deposit.     

Ore-forming process of the Huijiabao gold district,southwestern Guizhou Province,China: Evidence from fluid inclusions and stable isotopes

The Huijiabao gold district is one of the major producers for Carlin-type gold deposits in southwestern Guizhou Province, China, including Taipingdong, Zimudang, Shuiyindong, Bojitian and other gold deposits/occurrences. Petrographic observation, microthermometric study and Laser Raman spectroscopy were carried out on the fluid inclusions within representative minerals in various mineralization stages from these four gold deposits. Five types of fluid inclusions have been recognized in hydrothermal minerals of different ore-forming stages: aqueous inclusions, CO₂ inclusions, CO₂–H₂O inclusions, hydrocarbon inclusions, and hydrocarbon–H₂O inclusions. The ore-forming fluids are characterized by a H₂O + CO₂ + CH₄ ± N₂ system with medium to low temperature and low salinity. From early mineralization stage to later ones, the compositions of the ore-forming fluids experienced an evolution of H₂O + NaCl → H₂O + NaCl + CO₂ + CH₄ ± N₂ → H₂O + NaCl ± CH₄ ± CO₂ with a slight decrease in homogenization temperature and salinity. The δ¹⁸O values of the main-stage quartz vary from 15.2‰ to 24.1‰, while the δD_H2O and calculated δ¹⁸O_H2O values of the ore-forming fluids range from −56.9 to −116.3‰ and from 2.12‰ to 12.7‰, respectively. The δ¹³C_PDB and δ¹⁸O_SMOW values of hydrothermal calcite change in the range of −9.1‰ to −0.5‰ and 11.1–23.2‰, respectively. Stable isotopic characteristics indicate that the ore-forming fluid was mainly composed of ore- and hydrocarbon-bearing basinal fluid. The dynamic fractionation of the sulfur in the diagenetic pyrite is controlled by bacterial reduction of marine sulfates. The hydrothermal sulfides and the diagenetic pyrite from the host rocks are very similar in their sulfur isotopic composition, suggesting that the sulfur in the ore-forming fluids was mainly derived from dissolution of diagenetic pyrite. The study of fluid inclusions indicates that immiscibility of H₂O–NaCl–CO₂ fluids took place during the main mineralization stage and caused the precipitation and enrichment of gold.     

Geology and fluid evolution of the Wangfeng orogenic-type gold deposit,Western Tian Shan,China

The Wangfeng gold deposit is located in Western Tian Shan and the central section of the Central Asian Orogenic Belt (CAOB). The deposit is mainly hosted in Precambrian metamorphic rocks and Caledonian granites and is structurally controlled by the Shenglidaban ductile shear zone. The gold orebodies consist of gold-bearing quartz veins and altered mylonite. The mineralization can be divided into three stages: quartz–pyrite veins in the early stage, sulfide–quartz veins in the middle stage, and quartz–carbonate veins or veinlets in the late stage. Ore minerals and native gold mainly formed in the middle stage. Four types of fluid inclusions were identified based on petrography and laser Raman spectroscopy: CO₂–H₂O inclusions (C-type), pure CO₂ inclusions (PC-type), NaCl–H₂O inclusions (W-type), and daughter mineral-bearing inclusions (S-type). The early-stage quartz contains only primary CO₂–H₂O fluid inclusions with salinities of 1.62 to 8.03 wt.% NaCl equivalent, bulk densities of 0.73 to 0.89 g/cm³, and homogenization temperatures of 256 °C–390 °C. Vapor bubbles are composed of CO₂. The middle-stage quartz contains all four types of fluid inclusions, of which the CO₂–H₂O and NaCl–H₂O types yield homogenization temperatures of 210 °C–340 °C and 230 °C–300 °C, respectively. The CO₂–H₂O fluid inclusions have salinities of 0.83 to 9.59 wt.% NaCl equivalent and bulk densities of 0.77 to 0.95 g/cm³, with vapor bubbles composed of CO₂, CH₄, and N₂. Fluid inclusions in the late-stage quartz are NaCl–H₂O solution with low salinities (0.35–3.87 wt.% NaCl equivalent) and low homogenization temperatures (122 °C–214 °C). The coexistence of inclusions of these four types in middle-stage quartz suggests that fluid boiling occurred in the middle-stage mineralization. Trapping pressures estimated from CO₂–H₂O inclusions are 110–300 MPa and 90–250 MPa for the early and middle stages, respectively, suggesting that gold mineralization mainly occurred at depths of about 10 km. In general, the Wangfeng gold deposit originated from a metamorphic fluid system characterized by low salinity, low density, and enrichment of CO₂. Depressurized fluid boiling caused gold precipitation. Given the regional geology, ore geology, fluid-inclusion features, and ore-forming age, the Wangfeng gold deposit can be classified as a hypozonal orogenic gold deposit.     

Isotope and fluid inclusion geochemistry and genesis of the Qiangma gold deposit,Xiaoqinling gold field,Qinling Orogen,China

The Qiangma gold deposit is hosted in the > 1.9 Ga Taihua Supergroup metamorphic rocks in the Xiaoqinling terrane, Qinling Orogen, on the southern margin of the North China Craton. The mineralization can be divided as follows: quartz-pyrite veins early, quartz-polymetallic sulfide veinlets middle, and carbonate-quartz veinlets late stages, with gold being mainly introduced in the middle stage. Three types of fluid inclusions were identified based on petrography and laser Raman spectroscopy, i.e., pure carbonic, carbonic-aqueous (CO₂–H₂O) and aqueous inclusions.The early-stage quartz contains pure carbonic and CO₂–H₂O inclusions with salinities up to 12.7 wt.% NaCl equiv., bulk densities of 0.67 to 0.86 g/cm³, and homogenization temperatures of 280−365 °C. The early-stage is related to H₂O–CO₂ ± N₂ ± CH₄ fluids with isotopic signatures consistent with a metamorphic origin (δ¹⁸O_water = 3.1 to 5.2‰, δD = − 37 to − 73‰). The middle-stage quartz contains all three types of fluid inclusions, of which the CO₂–H₂O and aqueous inclusions yield homogenization temperatures of 249−346 °C and 230−345 °C, respectively. The CO₂–H₂O inclusions have salinities up to 10.9 wt.% NaCl equiv. and bulk densities of 0.70 to 0.98 g/cm³, with vapor bubbles composed of CO₂ and N₂. The isotopic ratios (δ¹⁸O_water = 2.2 to 3.6‰, δD = − 47 to − 79‰) suggest that the middle-stage fluids were mixed by metamorphic and meteoric fluids. In the late-stage quartz only the aqueous inclusions are observed, which have low salinities (0.9−9.9 wt.% NaCl equiv.) and low homogenization temperatures (145−223 °C). The isotopic composition (δ¹⁸O_water = − 1.9 to 0.5‰, δD = − 55 to − 66‰) indicates the late-stage fluids were mainly meteoric water.Trapping pressures estimated from CO₂–H₂O inclusions are 100−285 MPa for the middle stage, suggesting that gold mineralization mainly occurred at depths of 10 km. Fluid boiling and mixing caused rapid precipitation of sulfides and native Au. Through boiling and inflow of meteoric water, the ore-forming fluid system evolved from CO₂-rich to CO₂-poor in composition, and from metamorphic to meteoric, as indicated by decreasing δ¹⁸O_water values from early to late. The carbon, sulfur and lead isotope compositions suggest the hostrocks within the Taihua Supergroup to be a significant source of ore metals. Integrating the data obtained from the studies including regional geology, ore geology, and fluid inclusion and C–H–O–S–Pb isotope geochemistry, we conclude that the Qiangma gold deposit was an orogenic-type system formed in the tectonic transition from compression to extension during the Jurassic−Early Cretaceous continental collision between the North China and Yangtze cratons.     

Geology and fluid characteristics of the Ulu Sokor gold deposit,Kelantan, Malaysia: Implications for ore genesis and classification of the deposit

The Ulu Sokor gold deposit is one of the most famous and largest gold deposits in Malaysia and is located in the Central Gold Belt. This deposit consists of three major orebodies that are related to NS- and NE-striking fractures within fault zones in Permian-Triassic meta-sedimentary and volcanic rocks of the East Malaya Block. The faulting events represent different episodes that are related to each orebody and are correlated well with the mineralogy and paragenesis. The gold mineralization consists of quartz-dominant vein systems with sulfides and carbonates. The hydrothermal alteration and mineralization occurred during three stages that were characterized by (I) silicification and brecciation; (II) carbonatization, sericitization, and chloritization; and (III) quartz–carbonate veins.Fluid inclusions in the hydrothermal quartz and calcite of the three stages were studied. The primary CO₂–CH₄–H₂O–NaCl fluid inclusions in stage I are mostly related to gold mineralization and display homogenization temperatures of 269–389 °C, salinities of 2.77–11.89 wt.% NaCl equivalent, variable CO₂ contents (typically 5–29 mol%), and up to 15 mol% CH₄. In stage II, gold was deposited at 235–398 °C from a CO₂ ± CH₄–H₂O–NaCl fluid with a salinity of 0.83–9.28 wt.% NaCl equivalent, variable CO₂ contents (typically 5–63 mol%), and up to 4 mol% CH₄. The δ¹⁸O_H2O and δD values of the ore-forming fluids from the stage II quartz veins are 4.5 to 4.8‰ and − 44 to − 42‰, respectively, and indicate a metamorphic–hydrothermal origin. Oxygen fugacities calculated for the entire range of T-P-X_CO2 conditions yielded log f_O2 values between − 28.95 and − 36.73 for stage I and between − 28.32 and − 39.18 for stage II. These values indicate reduced conditions for these fluids, which are consistent with the mineral paragenesis, fluid inclusion compositions, and isotope values.The presence of daughter mineral-bearing aqueous inclusions is interpreted to be a magmatic signature of stage IIIa. Combined with the oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O = 6.8 to 11.9‰, δD = − 77 to − 62‰), these inclusions indicate that the initial fluid was likely derived from a magmatic source. In stage IIIb, the gold was deposited at 263° to 347 °C from a CO₂–CH₄–H₂O–NaCl fluid with a salinity of 5.33 to 11.05 wt.% NaCl equivalent, variable CO₂ contents (typically 9–15 mol%), and little CH₄. The oxygen and hydrogen isotopic compositions of this fluid (δ¹⁸O_H2O = 8.1 to 8.8‰, δD = − 44 to − 32‰) indicate that it was mainly derived from a metamorphic–hydrothermal source. The CO₂–H₂O ± CH₄–NaCl fluids that were responsible for gold deposition in the stage IIIc veins had a wide range of temperatures (214–483 °C), salinities of 1.02 to 21.34 wt.% NaCl equivalent, variable CO₂ contents (typically 4–53 mol%), and up to 7 mol% CH₄. The oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O = 8.5 to 9.8‰, δD = − 70 to − 58‰) were probably acquired at the site of deposition by mixing of the metamorphic–hydrothermal fluid with deep-seated magmatic water and then evolved by degassing at the site of deposition during mineralization. The log f_O2 values from − 28.26 to − 35.51 also indicate reduced conditions for this fluid in stage IIIc. Moreover, this fluid had a near-neutral pH and δ³⁴S values of H₂S of − 2.32 to 0.83‰, which may reflect the derivation of sulfur from the subducted oceanic lithospheric materials.The three orebodies represent different gold transportation and precipitation models, and the conditions of ore formation are related to distinct events of hydrothermal alteration and gold mineralization. The gold mineralization of the Ulu Sokor deposit occurred in response to complex and concurrent processes involving fluid immiscibility, fluid–rock reactions, and fluid mixing. However, fluid immiscibility was the most important mechanism for gold deposition and occurred in these orebodies, which have corresponding fluid properties, structural controls, geologic characteristics, tectonic settings, and origins of the ore-forming matter. These characteristics of the Ulu Sokor deposit are consistent with its classification as an orogenic gold deposit, while some of the veins are genetically related to intrusions.     

Magma mixing and gold mineralization in the Maevatanana gold deposit,Madagascar

The Maevatanana gold deposit in Madagascar is hosted by Archean metamorphic rocks in quartz–sulfide veins that are structurally controlled by NNW–SSE trending shear zones. Fluid inclusion data show that the trapping conditions in quartz range from 0.87 to 2.58 kbar at temperatures of 269–362 °C. Laser Raman spectroscopy confirms that these inclusions consist of CO₂, SO₂, and H₂O. The δ³⁴S values of the pyrites range from 1.7‰ to 3.6‰, with an average of 2.25‰, supporting a magmatic origin. Noble gases (He, Ne, Ar, Ke, Xe) are chemically inert, thus will not be involved in chemical reactions during geological processes. Also due to the low concentration of He in the atmosphere and the low solubility of He in aqueous fluids, the atmosphere-derived He is unlikely to significantly affect He abundances and isotopic ratios of crustal fluids, ensures that He production should have the typical crust ³He/⁴He ratios. The ³He/⁴He ratios of fluid inclusions in pyrite from the deposit range from 0.06 to 0.12 Ra, while the ⁴⁰Ar/³⁶Ar ratios range from 6631 to 11441. We infer that the ore-forming fluids could have been exsolved from a granitic magma. The oxygen and hydrogen isotope compositions of the ore-forming fluids (1.5‰ ≤ δ¹⁸O_H2O ≤ 7.8‰; –72‰ ≤ δD ≤ –117‰) indicate they were derived from a granitic magma. Four pyrite samples from the gold deposit yield a precise Re–Os isochron age of 534 ± 13 Ma. Given that the post-collisional granites in northern and central Madagascar were derived by melting of sub-continental lithospheric mantle and formed between 537 and 522 Ma, we can state that the gold metallogenesis was coeval with the crystallization age of these parental magmas. These data could be accounted for the formation of the Maevatanana gold deposit. First, the shear zones hosting the deposit formed around 2.5 Ga, when the Madagascan micro-continental blocks collided with other continental blocks, triggering large-scale tectono-magmatic activity and forming NNW–SSE trending shear zones. The gold mineralization at Maevatanana is coeval with the crystallization age of the Cambrian post-collisional A-type granitoid plutons in northern and central Madagascar, implying that this deposit is associated with extensional collapse of the East African Orogen. This extension in turn induced asthenospheric upwelling, melting of sub-continental lithospheric mantle. These magmas underplated the lower crust, generating voluminous granitic magmas by partial melting of the lower crust. The mixing magma during tectono-thermal reactivation of the East African Orogen produced large volumes of volatiles that extracted gold from the granitic magma and produced Au–S complexes (e.g., Au(HSO₃)²⁻). The shear zones, which were then placed under extensional collapse of the East African Orogen in the Cambrian, formed favorable pathways for the magmatic ore-forming fluids. These fluids then precipitated gold-sulfides that form the Maevatanana gold deposit.     

Origin of fluids in the Hetaoping Pb–Zn deposit,Baoshan–Narong–Dongzhi block metallogenic belt,Yunnan Province,SW China

The Hetaoping skarn type Pb–Zn deposit is located in the Baoshan–Narong–Dongzhi block metallogenic belt (BND belt), a belt between the Tengchong terrane and the Lanping basin. The deposit is hosted by marble of the upper Cambrian Hetaoping Formation and there are no outcrops of plutonic rocks present. This deposit is one of two large Pb–Zn deposits recently discovered in the BND belt. The Hetaoping deposit is a high Mn skarn. Four types of fluid inclusions were recognized in quartz from the deposit: vapor-rich inclusions (Type I), liquid-rich inclusions (Type II), pure vapor inclusions (Type III), and pure fluid inclusions (Type IV). The coexistence of Type I and Type III inclusions in Stage I (pre-ore stage) and Stage II (main ore stage) shows evidence of fluid boiling. Quartz-hosted fluid inclusions (Stage I and Stage II) display high homogenization temperatures and salinities (134–315 °C; 3.7–18.6 wt% NaCl equivalent) but calcite-hosted fluid inclusions in Stage III (post-ore stage) record lower homogenization temperatures and salinities (85–214 °C; 0.5–5.4 wt% NaCl equivalent). These data suggest a possible mixing between primary magmatic water and meteoric water. Based on chromatography data, the fluid inclusions in quartz contain abundant CO₂ and O₂ and subordinate CO, CH₄ and C₂H₂ + C₂H₄, suggesting an oxidizing environment. Based on their Na/K and Cl/SO₄ ratios, fluids contained in fluid inclusions are similar to volcanic spring waters. The low Na/K ratios (0.40–1.34) of the ore-forming fluids may have resulted from interaction with a deep alkaline intermediate-acid intrusion. Hydrogen and oxygen isotope determinations on quartz from different ore stages show low δ¹⁸O and δD values relative to VSMOW (−4.3‰ to 2.3‰; −109‰ to −91‰), indicating that the ore-forming fluids were diluted by external fluid sources as the skarn system cooled. Overall, geological and geochemical interpretations suggest that the Hetaoping deposit is a distal manganese skarn Pb–Zn deposit related to concealed intrusions.     

Magmatic hydrothermal origin of the Hadamengou-Liubagou Au-Mo deposit,Inner Mongolia,China: Constrains on geology,stable and Re-Os isotopes

The Hadamengou-Liubagou Au-Mo deposit is the largest gold deposit in Inner Mongolia of North China. It is hosted by amphibolite to granulite facies metamorphic rocks of the Archean Wulashan Group. To the west and north of the deposit, there occur three alkaline intrusions, including the Devonian-Carboniferous Dahuabei granitoid batholith, the Triassic Shadegai granite and the Xishadegai porphyritic granite with molybdenum mineralization. Over one hundred subparallel, sheet-like ore veins are confined to the nearly EW-trending faults in the deposit. They typically dip 40° to 80° to the south, with strike lengths from hundreds to thousands of meters. Wall rock alterations include potassic, phyllic, and propylitic alteration. Four distinct mineralization stages were identified at the deposit, including K-feldspar-quartz-molybdenite stage (I), quartz-pyrite-epidote/chlorite stage (II), quartz-polymetallic sulfide-gold stage (III), and carbonate-sulfate-quartz stage (IV). Gold precipitated mainly during stage III, while Mo mineralization occurred predominantly in stage I. The δD_H2O and δ¹⁸O_H2O values of the ore-forming fluids range from −125‰ to −62‰ and from 1.4‰ to 7.5‰, respectively, indicating that the fluids were dominated by magmatic water with a minor contribution of meteoric water. The δ¹³C_PDB and δ¹⁸O_SMOW values of hydrothermal carbonate minerals vary from −10.3‰ to −3.2‰ and from 3.7‰ to 15.3‰, respectively, suggesting a magmatic carbon origin. The δ³⁴S_CDT values of sulfides from the ores vary from −21.7‰ to 5.4‰ and are typically negative (mostly −20‰ to 0‰). The wide variation of the δ³⁴S_CDT values, the relatively uniform δ¹³C values of carbonates (typically −5.5‰ to −3.2‰), as well as the common association of barite with sulfides suggest that the minerals were precipitated under relatively high fo₂ conditions, probably in a magmatic fluid with δ³⁴S_ƩS ≈ 0‰. The Re-Os isotopic dating on molybdenite from Hadamengou yielded a weighted average age of 381.6 ± 4.3 Ma, indicating that the Mo mineralization occurred in Late Devonian. Collectively, previous ⁴⁰Ar-³⁹Ar and Re-Os isotopic dates roughly outlined two ranges of mineralizing events of 382–323 Ma and 240–218 Ma that correspond to the Variscan and the Indosinian epochs, respectively. The Variscan event is approximately consistent with the Mo mineralization at Hadamengou-Liubagou and the emplacement of the Dahuabei Batholith, whereas the Indosinian event roughly corresponds to the possible peak Au mineralization of the Hadamengou-Liubagou deposit, as well as the magmatic activity and associated Mo mineralization at Xishadegai and Shadegai. Geologic, petrographic and isotopic evidence presented in this study suggest that both gold and molybdenum mineralization at Hadamengou-Liubagou is of magmatic hydrothermal origin. The molybdenum mineralization is suggested to be associated with the magmatic activity during the southward subduction of the Paleo-Asian Ocean beneath the North China Craton (NCC) in Late Devonian. The gold mineralization is most probably related to the magma-derived hydrothermal fluids during the post-collisional extension in Triassic, after the final suturing between the Siberian and NCC in Late Permian.     

Geology and isotope geochemistry (C–O–S) of the Diyadin gold deposit,Eastern Turkey: A newly-discovered Carlin-like deposit

Diyadin mineralization is the first reported gold deposit located in a collisional tectonic environment in Eastern Anatolia. The mineralization is related to N–S and N10–20°W-trending fault systems and hosted within the Paleozoic metamorphic basement rocks of the Anatolide–Toride microcontinent. Calc-schist, dolomitic marble and Miocene and Quaternary volcanic rocks comprise the exposed units in the mineralized area. Geochemical signatures, alteration types and host rock characteristics of the Diyadin gold deposit resemble those of Carlin-type deposits. Mineralization is constrained by alteration of overlying volcanic rocks to younger than ~ 14 Ma (K–Ar).Carbon and oxygen stable isotope measurements of carbonate rocks were made on six drill holes (n = 81) with an additional four samples of fresh carbonate rocks from surface outcrops. Background carbonate rocks have δ¹³C_V-PDB ~ 1.8‰ and δ¹⁸O_V-SMOW ~ 27‰. Isotopically-altered host rock samples have decreased δ¹⁸O (down to ~+11.4‰) and variable δ¹³C (from − 3.6 to + 4.8‰). Postore carbonate veins and cave-fill material have distinctly different isotopic signatures, particularly carbon (from δ¹³C = + 8.4 to + 9.8‰). Whether this post-ore carbonate is simply very late in mineralization associated with the gold system, or is a completely different, younger system utilizing the same pathways, is unclear at present. Within the host rock sample set, there is no correlation between gold and δ¹³C, and a weak correlation between gold and δ¹⁸O, indicative of water–rock interaction and isotopic alteration. Both the isotopic data and structural mapping suggest that the main upflow zone for the deposit is near the northern portion of the drill fence. Additional data at multiple scales are required to clarify the relationship(s) between fluid flow and mineralization.     

Geology and genesis of Kafang Cu–Sn deposit,Gejiu district,SW China

Kafang is one of the main ore deposits in the world-class Gejiu polymetallic tin district, SW China. There are three main mineralization types in the Kafang deposit, i.e., skarn Cu–Sn ores, stratiform Cu ores hosted by basalt and stratiform Cu–Sn ores hosted by carbonate. The skarn mainly consists of garnet and pyroxene, and retrograde altered rocks. These retrograde altered rocks are superimposed on the skarn and are composed of actinolite, chlorite, epidote and phlogopite. Major ore minerals are chalcopyrite, pyrrhotite, cassiterite, pyrite and scheelite. Sulfur and Pb isotopic components hint that the sources of different types of mineralization are distinctive, and indicate that the skarn ore mainly originated from granitic magma, whereas the basalt-hosted Cu ores mainly derived from basalt. Microthermometry results of fluid inclusions display a gradual change during the ore-forming process. The homogenization temperature of different types of inclusions continuously decreases from early to late mineralization stages. The salinities and freezing temperatures exhibit similar evolutionary tendencies with the T _{homogenization}, while the densities of the different types keep constant, the majority being less than 1. Oxygen and hydrogen isotopic values (δ¹⁸O and δD) of the hydrothermal fluids fall within ranges of 3.1 to 7.7‰ with an average of 6.15‰, calculated at the corresponding homogenization temperature, and − 73 and − 98‰ with an average of − 86.5‰, respectively. Microthermometry data and H–O isotopes indicate that the ore-forming fluid of the Kafang deposit is mainly derived from magma in the early stage and a mixture of meteoric and magmatic water in late stage. Molybdenite Re–Os age of the skarn type mineralization is 83.4 ± 2.1 Ma, and the stratiform ores hosted by basalt is 84.2 ± 7.3 Ma, which are consistent with the LA-ICP-MS zircon age of the Xinshan granite intrusion (83.1 ± 0.4 Ma). The evidence listed above reflects the fact that different ore styles in the Kafang deposit belong to the same mineralization system.     

Fluid inclusion geochemistry and 40Ar/39Ar geochronology constraints on the genesis of the Jianchaling Au deposit,China

The giant Jianchaling gold deposit is located in the Shaanxi Province, China. The mineralization is hosted by WNW-trending faults in the Mianxian-Lueyang-Yangpingguan (MLY) area. The mineralization can be divided into three stages based on mineralogical assemblages and crosscutting relationships of mineralized quartz veins. These stages, from early to late, are characterized by the mineral assemblage of: (1) quartz – coarse-grained pyrite – pyrrhotite – pentlandite – dolomite; (2) quartz – pyrite – gold – sphalerite – galena – carbonate – arsenopyrite – fuchsite; and (3) dolomite – calcite – quartz – fine-grained pyrite – realgar – orpiment.Three types of fluid inclusions have been recognized in this study based on petrographic and microthermometric measurements, including pure CO₂ and/or CH₄ (PC-type), NaCl-H₂O (W-type), and NaCl-CO₂-H₂O (C-type) fluid inclusions. These fluid inclusion types are present in quartz from the Stage 1 and 2 assemblages, whereas the Stage 3 quartz only contains W-type fluid inclusions. The Stage 2 assemblage is associated with the mineralization at the Jianchaling deposit. Fluid inclusions of Stage 1 quartz homogenize mainly between 250° and 360 °C, with salinities up to 15.6 wt.% NaCl equiv., whereas the Stage 3 dolomite with homogenization temperatures of 160° – 220 °C and salinities of 1.1–7.4 wt.% NaCl equiv. This indicates that the ore fluid system evolved from CO₂-rich, probably metamorphic hydrothermal to CO₂-poor, meteoric fluid. All three types of fluid inclusions can be observed in the Stage 2 quartz, suggesting that this heterogeneous association was trapped from a boiling fluid system. These inclusions homogenized at temperatures of 200°–250 °C and salinities of 1.2–12.4 wt.% NaCl equiv. The estimated trapping pressures of the fluid inclusions are between 117 and 354 MPa in Stage 1, suggesting an alternating lithostatic–hydrostatic fluid system, which was controlled by a fault-valve at the depth of ~ 12 km.Two fuchsite samples collected from the Stage 2 polymetallic-quartz veins yielded well-defined ⁴⁰Ar/³⁹Ar isotopic plateau ages of 197 ± 2 and 194 ± 2 Ma, and ³⁹Ar/³⁶Ar-⁴⁰Ar/³⁶Ar normal isochrones of 198 ± 2 and 199 ± 2 Ma. This indicates that the mineralization at Jianchaling is Early Jurassic (ca. 198 Ma) in age. We propose that Jianchaling is an orogenic gold deposit, and formed during continental collision related to the northward subduction of the Mian-Lue oceanic plate during the Early Jurassic. We also conclude that the beginning of the continental collision between the Yangtze and the North China Cratons took place around 200 Ma.     

Geology,geochemistry and age of the Hukeng tungsten deposit,Southern China

The Hukeng tungsten deposit, located in the Wugongshan area in central part of Jiangxi province, South China, is a large-scale quartz-vein wolframite deposit. It is hosted in the Hukeng granitic intrusion. Based on the mineral assemblage and crosscutting relationship of the veins, three mineralization stages are identified, including: (1) quartz–wolframite stage, (2) quartz–fluorite–wolframite stage, and (3) quartz–pyrite–sphalerite–wolframite stage.The homogenization temperatures of fluid inclusions in vein quartz vary from 220 to 320 °C, and the salinities are from 0 to 10 wt.% NaCl equiv.; corresponding densities range from 0.7 to 1 g/cm³. These features indicated that the ore-forming fluids in the Hukeng tungsten deposit have medium temperature, low density and low salinity.The δ¹⁸OSMOW values of quartz range from 10.8‰ to 14.4‰, with corresponding δ¹⁸O_fluid values of 3.7‰ to 7.7‰, and δD values of fluid inclusions of between ? 70‰ and ? 55‰. The combined isotopic data indicate that the ore-forming fluids of the Hukeng tungsten deposit were mainly derived from magmatic water, with some minor input from meteoric water.We have carried out molybdenite Re–Os and muscovite ⁴⁰Ar/³⁹Ar dating to constrain the timing of mineralization. Re–Os dating of six molybdenite samples yielded model ages ranging from 149.1 ± 2.0 to 150.7 ± 3.7 Ma, with an average of 150.0 Ma. The Re–Os analyses give a well-defined ¹⁸⁷Re/¹⁸⁷Os isochron with an age of 150.2 ± 2.2 Ma (MSWD = 0.60). Hydrothermal muscovite yields a plateau ⁴⁰Ar/³⁹Ar age of 147.2 ± 1.4 Ma. ⁴⁰Ar/³⁹Ar age is in good agreement with the Re–Os age. These ages show that the timing of tungsten mineralization occurred at about 150 Ma. Our new data, when combined with published geochronological results from the other major deposits in this region, suggest that widespread W mineralization occurred in the Late Jurassic throughout South China.     

Nature of ore-forming fluid and formation conditions of BIF-hosted gold mineralization in the Archean Amalia Greenstone Belt,South Africa: Constraints from fluid inclusion and stable isotope studies

Orogenic gold mineralization in the Amalia greenstone belt is hosted by oxide facies banded iron-formation (BIF). Hydrothermal alteration of the BIF layers is characterized by chloritization, carbonatization, hematization and pyritization, and quartz-carbonate veins that cut across the layers. The alteration mineral assemblages consist of ankerite-ferroan dolomite minerals, siderite, chlorite, hematite, pyrite and subordinate amounts of arsenopyrite and chalcopyrite. Information on the physico-chemical properties of the ore-forming fluids and ambient conditions that promoted gold mineralization at Amalia were deduced from sulfur, oxygen and carbon isotopic ratios, and fluid inclusions from quartz-carbonate samples associated with the gold mineralization.Microthermometric and laser Raman analyses indicated that the ore-forming fluid was composed of low salinity H₂O-CO₂ composition (~3 wt% NaCl equiv.). The combination of microthermometric data and arsenopyrite-pyrite geothermometry suggest that quartz-carbonate vein formation, gold mineralization and associated alteration of the proximal BIF wall rock occurred at temperature-pressure conditions of 300 ± 30 °C and ∼2 kbar. Thermodynamic calculations at 300 °C suggest an increase in fO₂ (10⁻³²–10⁻³⁰ bars) and corresponding decrease in total sulfur concentration (0.002–0.001 m) that overlapped the pyrite-hematite-magnetite boundary during gold mineralization. Although hematite in the alteration assemblage indicate oxidizing conditions at the deposit site, the calculated low fO₂ values are consistent with previously determined high Fe/Fe + Mg ratios (>0.7) in associated chlorite, absence of sulfates and restricted positive δ³⁴S values in associated pyrite. Based on the fluid composition, metal association and physico-chemical conditions reported in the current study, it is confirmed that gold in the Amalia fluid was transported as reduced bisulfide complexes (e.g., Au(HS)₂⁻). At Amalia, gold deposition was most likely a combined effect of increase in fO₂ corresponding to the magnetite-hematite buffer, and reduction in total sulfur contents due to sulfide precipitation during progressive fluid-rock interaction.The epigenetic features coupled with the isotopic compositions of the ore-forming fluid (δ³⁴S_ΣS = +1.8 to +2.3‰, δ¹⁸O_H2O = +6.6 to +7.9‰, and δ¹³C_ΣC = −6.0 to −7.7‰ at 300–330 °C) are consistent with an externally deep-sourced fluid of igneous signature or/and prograde metamorphism of mantle-derived rocks.     

Alteration and mineralization at the Zhibula Cu skarn deposit,Gangdese belt,Tibet

The Zhibula Cu skarn deposit contains 0.32 Mt. Cu metal with an average grade of 1.64% and is located in the Gangdese porphyry copper belt in southern Tibet. The deposit is a typical metasomatic skarn that is related to the interaction of magmatic–hydrothermal fluids and calcareous host rock. Stratiform skarn orebodies occur at the contact between tuff and marble in the Lower Jurassic Yeba Formation. Alteration zones generally grade from a fresh tuff to a garnet-bearing tuff, a garnet pyroxene skarn, and finally to a wollastonite marble. Minor endoskarn alteration zonations are also observed in the causative intrusion, which grade from a fresh granodiorite to a weakly chlorite-altered granodiorite, a green diopside-bearing granodiorite, and to a dark red-brown garnet-bearing granodiorite. Prograde minerals, which were identified by electron probe microanalysis include andradite–grossularite of various colors (e.g., red, green, and yellow) and green diopside. Retrograde metamorphic minerals overprint the prograde skarn, and are mainly composed of epidote, quartz, and chlorite. The ore minerals consist of chalcopyrite and bornite, followed by magnetite, molybdenite, pyrite, pyrrhotite, galena, and sphalerite. Three types of fluid inclusions are recognized in the Zhibula deposit, including liquid-rich two-phase inclusions (type L), vapor-rich two-phase inclusions (type V), and daughter mineral-bearing three-phase inclusions (type S). As the skarn formation evolved from prograde (stage I) to early retrograde (stage II) and later retrograde (stage III), the ore-forming fluids correspondingly evolved from high temperature (405–667 °C), high salinity (up to 44.0 wt.% NaCl equiv.), and high pressure (500–600 bar) to low-moderate temperature (194–420 °C), moderate-high salinity (10.1–18.3 and 30.0–44.2 wt.% NaCl equiv.), and low-moderate pressure (250–350 bar). Isotopic data of δ³⁴S (− 0.1‰ to − 6.8‰, estimated δ³⁴S_fluids = − 0.7‰), δD_H2O (− 91‰ to − 159‰), and δ¹⁸O_H2O (1.5‰ to 9.2‰) suggest that the ore-forming fluid and material came from magmatic–hydrothermal fluids that were associated with Miocene Zhibula intrusions. Fluid immiscibility likely occurred at the stage I and stage II during the formation of the skarn and mineralization. Fluid boiling occurred during the stage III, which is the most important Cu deposition mechanism for the Zhibula deposit.     

Fluid Inclusion,H-O,S, Pb and noble gas isotope studies of the Aerhada Pb-Zn-Ag deposit,Inner Mongolia,NE China

The Aerhada Pb-Zn-Ag deposit is located in the western segment of the Great Hinggan Range Ag-Pb-Zn-Cu-Mo-Au-Fe metallogenic belt in NE China. Orebodies occur mainly as vein type and are hosted by sandstone and siliceous slate. Three stages of primary mineralization, including an early arsenopyrite-pyrite-quartz, a middle polymetallic and silver sulfides-quartz and a late sphalerite-pyrite-calcite-fluorite are recognized. Four types of fluid inclusions have been identified in the ore-bearing quartz and fluorite veins, i.e., liquid-rich, gas-rich, three-phase CO₂ aqueous inclusions, and pure gas or liquid aqueous inclusions. Microthermometric studies on fluid inclusions reveal that homogenization temperatures from early to late stages range from 253° to 430 °C, 195° to 394 °C and 133° to 207 °C, respectively. Fluid salinities range from 2.9 to 14.0 wt.% NaCl equiv. The vapor composition of the ore fluid is dominated by H₂O, CO₂ and CH₄, with minor proportions of N₂. The fluid δ¹⁸O_H2O and δD_H2O values vary from +1.6 to +9.3‰ and −122 to −56‰, respectively, and reflect a magmatic fluid and a meteoric fluid dominant hydrothermal system for the early and late stages of mineralization, respectively. The calculated δ³⁴S_H2S values of hydrothermal fluids in equilibrium with sulfides range from +5.2 to +7.1‰, suggesting a mixed source for sulfur, i.e., the local magmatic and sedimentary rocks. The Pb isotope compositions of sulfides are similar to those of the local magmatic and sedimentary rocks, implying that lead and possibly silver relate to these sources. The noble gas isotope compositions of fluid inclusions hosted in ore minerals suggest that the ore-forming fluids were dominantly derived from a deep mantle source. Fluid mixing and dilution are inferred as the dominant mechanisms for ore deposition. The Aerhada Pb-Zn-Ag deposit can be classified as a medium to low temperature hydrothermal vein type deposit.     

Geological characteristics and genesis of the Laoshankou Fe–Cu–Au deposit in Junggar,Xinjiang, Central Asian Orogenic Belt

The Laoshankou Fe–Cu–Au deposit is located at the northern margin of Junggar Terrane, Xinjiang, China. This deposit is hosted in Middle Devonian andesitic volcanic breccias, basalts, and conglomerate-bearing basaltic volcanic breccias of the Beitashan Formation. Veined and lenticular Fe–Cu–Au orebodies are spatially and temporally related to diorite porphyries in the ore district. Wall–rock alteration is dominated by skarn (epidote, chlorite, garnet, diopside, actinolite, and tremolite), with K–feldspar, carbonate, albite, sericite, and minor quartz. On the basis of field evidence and petrographic observations, three stages of mineralization can be distinguished: (1) a prograde skarn stage; (2) a retrograde stage associated with the development of Fe mineralization; and (3) a quartz–sulfide–carbonate stage associated with Cu–Au mineralization. Electron microprobe analysis shows that garnets and pyroxenes are andradite and diopside-dominated, respectively. Fluid inclusions in garnet yield homogenization temperatures (T_h) of 205–588 °C, and salinities of 8.95–17.96 wt.% NaCl equiv. In comparison, fluid inclusions in epidote and calcite yield T_h of 212–498 and 150–380 °C, and salinities of 7.02–27.04 and 13.4–18.47 wt.% NaCl equiv., respectively. Garnets yield values of 6.4‰ to 8.9‰ δ¹⁸O_fluid, whereas calcites yield values of − 2.4‰ and 4.2‰ δ¹⁸O_fluid, and − 0.9‰ to 2.4‰ δ¹³C_PDB, indicating that the ore-forming fluids were dominantly magmatic fluids in the early stage and meteoric water in the late stage. The δ³⁴S values of sulfides range from − 2.6‰ to 5.4‰, indicating that the sulfur in the deposit was probably derived from deep-seated magmas. The diorite porphyry yields LA–MC–ICP–MS zircon U–Pb age of 379.7 ± 3.0 Ma, whereas molybdenites give Re–Os weighted mean age of 383.2 ± 4.5 Ma (MSWD = 0.06). These ages suggest that the mineralization-related diorite porphyry was emplaced during the Late Devonian, coincident with the timing of mineralization within the Laoshankou Fe–Cu–Au deposit. The geological and geochemical evidence presented here suggest that the Laoshankou Fe–Cu–Au deposit is a skarn deposit.     

Timing and mechanism of gold mineralization at the Wang'ershan gold deposit,Jiaodong Peninsula,eastern China

The Wang'ershan gold deposit, located in the southern Jiaojia goldfield, is currently the largest gold deposit hosted within the subsidiary faults in Jiaodong Peninsula, with a gold reserve of > 60 t gold at a grade of 4.07 g/t Au. It is hosted in the Late Jurassic Linglong biotite granites and controlled by the second-order, N- to NNE-trending Wang'ershan Fault (and its subsidiary faults) which is broadly parallel to the first-order Jiaojia Fault in the goldfield. Gold mineralization occurs as both disseminated- and stockwork-style and quartz–sulfide vein-style ores, mainly within altered cataclasites and breccias, and sericite–quartz and potassic alteration zones, respectively. Mineralization stages can be divided into (1) the pyrite–quartz–sericite stage, (2) the quartz–pyrite stage, (3) the quartz–sulfide stage, and (4) the quartz–carbonate stage.Two sericite samples associated with the main ore-stage pyrites from pyritic phyllic ores of the deposit with weighted mean plateau ⁴⁰Ar/³⁹Ar age of 120.7 ± 0.6 Ma and 119.2 ± 0.5 Ma, respectively, were selected for ⁴⁰Ar/³⁹Ar geochronology. On the basis of petrography and microthermometry, three types of primary fluid inclusions related to the ore forming event were identified: type 1 H₂O–CO₂–NaCl, type 2 aqueous, and type 3 CO₂ fluid inclusions (in decreasing abundance). Stage 1 quartz contains all three primary fluid inclusions, while stages 2 and 3 quartz contain both type 1 and 2 inclusions, and stage 4 quartz contains only type 2 inclusions. The contemporaneous trapping, similar salinities and total homogenization temperature ranges, and different homogenization phases of type 1 and type 2 inclusions indicate that fluid immiscibility did take place in stages 1, 2 and 3 ores, with P–T conditions of 190 to 85 MPa and 334 to 300 °C for stage 1 and 200 to 40 MPa and 288 to 230 °C for stages 2 and 3. Combined with the H–O–C–S–Pb isotopic compositions, ore-forming fluids may have a metamorphic-dominant mixed source, which could be associated with the dehydration and decarbonisation of a subducting paleo-Pacific plate and characterized by medium–high temperature (285–350 °C), CO₂-bearing (~ 8 mol%) with minor CH₄ (1–4% in carbonic phase), and low salinity (3.38–8.45 eq. wt.% NaCl). During mineralization, the fluid finally evolved into a medium–low temperature NaCl–H₂O system. Au(HS)₂⁻ was the most probable gold-transporting complex at Wang'ershan, due to the low temperature (157–350 °C) and near-neutral to weakly acidic ore fluids. The reaction between gold-bearing fluids and iron-bearing wall-rocks, and fluid-immiscibility processes caused via fluid–pressure cycling during seismic movement along fault zones that host lode-gold orebodies, which led to breakdown of Au(HS)₂⁻, are interpreted as the two main precipitation mechanisms of gold deposition.In general, the Wang'ershan deposit and other deposits in the Jiaojia camp have concordant structural system and wall-rock alteration assemblages, nature of orebodies and gold occurrence conditions, as well as the similar geochronology, ore-forming fluids system and stable isotope compositions. Thus gold mineralization in the Jiaojia goldfield was a large-scale unified event, with consistent timing, origin, process and mechanism.     

Some new data on the genesis of the Linghou Cu–Pb–Zn polymetallic deposit—Based on the study of fluid inclusions and C–H–O–S–Pb isotopes

The Linghou deposit, located near Hangzhou City of Zhejiang Province, eastern China, is a medium-sized polymetallic sulfide deposit associated with granitic intrusion. This deposit is structurally and lithologically controlled and commonly characterized by ore veins or irregular ore lenses. In this deposit, two mineralization events were identified, of which the former produced the Cu–Au–Ag orebodies, while the latter formed Pb–Zn–Cu orebodies. Silicification and calc-silicate (skarn type), phyllic, and carbonate alternation are four principal types of hydrothermal alteration. The early Cu–Au–Ag and late Pb–Zn–Cu mineralizations are characterized by quartz ± sericite + pyrite + chalcopyrite + bornite ± Au–Ag minerals ± magnetite ± molybdenite and calcite + dolomite + sphalerite + pyrite + chalcopyrite + galena, respectively. Calcite clusters and calcite ± quartz vein are formed during the late hydrothermal stage.The NaCl–H₂O–CO₂ system fluid, coexisting with NaCl–H₂O system fluid and showing the similar homogenization temperatures (385 °C and 356 °C, respectively) and different salinities (16.89–21.68 wt.% NaCl eqv. and 7.70–15.53 wt.% NaCl eqv.), suggests that fluid immiscibility occurred during the Cu–Au–Ag mineralization stage and might have given rise to the ore-metal precipitation. The ore-forming fluid of the Pb–Zn–Cu mineralization mainly belongs to the NaCl–H₂O–CO₂ system of high temperature (~ 401 °C) and mid-high salinity (10.79 wt.% NaCl eqv.).Fluids trapped in the quartz-chalcopyrite vein, Cu–Au–Ag ores, Pb–Zn–Cu ores and calcite clusters yielded δ¹⁸O_H2O and δD values varying from 5.54‰ to 13.11‰ and from − 71.8‰ to − 105.1‰, respectively, indicating that magmatic fluids may have played an important role in two mineralization events. The δ¹³C_PDB values of the calcite change from − 2.78‰ to − 4.63‰, indicating that the CO₃^2 − or CO₂ in the ore-forming fluid of the Pb–Zn–Cu mineralization was mainly sourced from the magmatic system, although dissolution of minor marine carbonate may have also occurred during the ore-forming processes. The sulfide minerals have homogeneous lead isotopic compositions with ²⁰⁶Pb/²⁰⁴Pb ranging from 17.958 to 18.587, ²⁰⁷Pb/²⁰⁴Pb ranging from 15.549 to 15.701, and ²⁰⁸Pb/²⁰⁴Pb ranging from 37.976 to 39.052, indicating that metallic elements of the Linghou deposit came from a mixed source involving mantle and crustal components.Based on geological evidence, fluid inclusions, and H–O–C–S–Pb isotopic data, the Linghou polymetallic deposit is interpreted as a high-temperature, skarn-carbonate replacement type. Two types of mineralization are both related to the magmatic–hydrothermal system, with the Cu–Au–Ag mineralization having a close relationship with granodiorite.     

Nakhlak carbonate-hosted Pb(Ag) deposit,Isfahan province,Iran: a geological,mineralogical, geochemical,fluid inclusion,and sulfur isotope study

The Upper Cretaceous Nakhlak epigenetic vein-type Pb(Ag) deposit is located 55 km northeast of the town of Anarak in Isfahan Province, Iran. The deposit contains 7 Mt of galena-barite ore with an average grade of 8.33% Pb, 0.38% Zn, and 72 ppm Ag. The ore mineralization occurs as stratabound, epigenetic, steeply dipping, east-west–trending veins in faulted- or fracture-controlled Upper Cretaceous Sadar carbonates. Galena and barite are the primary minerals. Minor sphalerite, tennantite-tetrahedrite, pyrite, and chalcopyrite occur as inclusions in galena. Cerussite with minor amounts of anglesite and plattnerite formed in the oxidized supergene zone. The ore and ore-related minerals were deposited in the hydrothermally dolomitized carbonate host rock containing saddle-shaped dolomite. Geochemically, the dolomitized carbonate host rocks are enriched in MgO, Fe₂O₃, MnO, Pb, Zn, and Ba, but depleted in CaO. The galena concentrate contains high values of Ag (932 ppm), Sb (342 ppm), Cu (422 ppm), As (91 ppm), and Zn (296 ppm); the presence of these trace elements indicates a low-temperature type of galena mineralization. This interpretation is corroborated by fluid inclusions containing 12.98 wt.% NaCl equivalent salinity; the inclusions homogenize at the low temperature of about 152.1 °C. The similarity between δ³⁴S_(V-CDT) values in Nakhlak barite and Permian–Triassic δ³⁴S marine sulfate values indicates that the Nakhlak sulfur was probably provided from evaporates of Permian–Triassic age. The δ³⁴S_(V-CDT) values of galena and barite samples occupy the ranges of − 1.04‰ to + 8.62‰ and + 10.95‰ to + 13.71‰, respectively, and are similar to Mississippi Valley–type (MVT) deposits. The low-temperature basinal fluids, evaporate-originated sulfur, and fault- or fracture-controlled galena-rich veins in the Nakhlak deposit resemble the type of geological features documented in Pb-rich MVT deposits.     

The sources of ore-forming material in the low-sulfidation epithermal Wulaga gold deposit,NE China: Constraints from S,Pb isotopes and REE pattern

The Wulaga gold deposit, located in Heilongjiang province, NE China, is a subvolcanic rock-hosted, low-sulfidation epithermal gold deposit, and has an Au reserve of about 84 tons. The gold mineralization occurs in a crypto-explosive breccia, and is spatially and temporally associated with an Early Cretaceous granodioritic porphyry. Three individual stages of mineralization have been identified in the Wulaga gold deposit: an early white quartz-euhedral vein stage, a fine-grained pyrite–marcasite–stibnite–chalcedony stage, and a late calcite–pyrite stage. The sulfur isotopic values of sulfide minerals vary in a wide range from − 4 to 4.9‰, but are concentrated in the range of − 3 to 0‰, implying that sulfur in the hydrothermal fluids was derived from magmatic volatiles. Lead isotopic results of the granodioritic porphyry (²⁰⁶Pb/²⁰⁴Pb = 18.341–18.395, ²⁰⁷Pb/²⁰⁴Pb = 15.507–15.523, ²⁰⁸Pb/²⁰⁴Pb = 38.174–38.251) and sulfide minerals (²⁰⁶Pb/²⁰⁴Pb = 18.172–18.378, ²⁰⁷Pb/²⁰⁴Pb = 15.536–15.600, ²⁰⁸Pb/²⁰⁴Pb = 38.172–38.339) are comparatively consistent and clustered together between the orogenic and upper mantle lines, indicating the lead in the ores is closely related to the parent magma of the granodioritic porphyry. The REE patterns of fluid inclusions trapped in sulfides are similar to those of the granodioritic porphyry, which confirms the magmatic origin of the REE in the hydrothermal fluids. The characteristics of S and Pb isotopes and REE suggest that the ore-forming materials of the Wulaga gold deposit are partly magmatic in origin, and related to a high-level hydrous granodioritic magma.