Strategic and rare elements in Cretaceous-Cenozoic cobalt-rich ferromanganese crusts from seamounts in the Canary Island Seamount Province (northeastern tropical Atlantic)

Thick ferromanganese (Fe-Mn) crusts from four Cretaceous seamounts (The Paps, Tropic, Echo and Drago) at the southern Canary Island Seamount Province (CISP) in the northeastern tropical Atlantic were recovered along the flanks and summits from 1700 to 3000 m water depths. CISP is composed of > 100 seamounts and submarine hills, is likely the oldest hotspot track in the Atlantic Ocean, and is the most long-lived of known hotspots globally. The Fe-Mn crusts grow on basalt-sedimentary rock substrates below the northeastern tropical Atlantic core of the oxygen minimum zone (OMZ) with a maximum thickness of 250 mm at a water depth of 2400 m. The mineralogical and chemical composition of these Fe-Mn crusts indicate a hydrogenetic origin. The main Mn minerals are vernadite with minor interlayered todorokite and asbolane-buserite. Fe oxides are essentially ferroxyhyte and goethite. The Fe-Mn crusts show high average contents in Fe (23.5 wt%), Mn (16.1 wt%), and trace elements like Co (4700 μg/g), Ni (2800 μg/g), V (2400 μg/g) and Pb (1600 μg/g). Rare earth elements plus yttrium (REY) averages 2800 μg/g with high proportions of Ce (1600 μg/g). Total platinum group elements (PGEs) average 230 ng/g, with average Pt of 182 ng/g. Two main types of growth layers form the crusts: 1) a dense laminae of oxides with high contents in Mn, Co and Ni associated with vernadite and Cu, Ni, and Zn associated with todorokite; 2) botryoidal layers with high contents in Fe, Ti, V and REY associated with goethite. The Fe-Mn crusts from the CISP region show higher contents in Fe, V, Pb and REY but lower Mn, Co, Ni and PGEs contents than Pacific or Indian ocean seamount crusts. The oldest maximum age of initiation of crust growth was at 76 Ma (Campanian, Late Cretaceous). Using a combination of high resolution Co-chronometer and geochemical data along an Electron Probe Micro Analysis (EPMA) transect, four stages in morphology, chemical contents and growth rates can be differentiated in the the Cenozoic crusts since 28 Ma, which we interpret as due to changes in the ventilation of the North Atlantic OMZ and to the increase of Saharian dust inputs. An earliest growth period, characterized by similar contents of Fe and Mn in the interval 27.8–24.45 Ma (late Oligocene-early Miocene) reflects slow precipitation related to a thick OMZ. An intermediate laminated zone with higher contents of Fe, Si and P, high growth rates reaching 4.5 mm/Ma, and precipitation of Fe-Mn oxides during the interval 24.5–16 Ma is related to periods of ventilation of the OMZ by intrusion of deep upwelling currents. Significant increase in Fe contents at ca. 16 Ma correlates with the onset of incursions of Northern Component Waters into the North Atlantic. Finally, since 12 Ma, the very low growth rates (< 0.5 mm/Ma) of the crust are related to a thick North Atlantic OMZ, an increase in Sahara dust input and a stable thermohaline circulation.     

Laboratory study of calcite–gypsum sludge–water interactions in a flooded tailings impoundment at the Kristineberg Zn–Cu mine,northern Sweden

Due to liming of acid mine drainage, a calcite–gypsum sludge with high concentrations of Zn (24,400 ± 6900 μg g⁻¹), Cu (2840 ± 680 μg g⁻¹) and Cd (59 ± 20 μg g⁻¹) has formed in a flooded tailings impoundment at the Kristineberg mine site. The potential metal release from the sludge during resuspension events and in a long-term perspective was investigated by performing a shake flask test and sequential extraction of the sludge. The sequentially extracted carbonate and oxide fractions together contained ⩾97% of the total amount of Cd, Co, Cu, Ni, Pb and Zn in the sludge. The association of these metals with carbonates and oxides appears to result from sorption and/or coprecipitation reactions at the surfaces of calcite and Fe, Al and Mn oxyhydroxides forming in the impoundment. If stream water is diverted into the flooded impoundment, dissolution of calcite, gypsum and presumably also Al oxyhydroxides can be expected during resuspension events. In the shake flask test (performed at a pH of 7–9), remobilisation of Zn, Cu, Cd and Co from the sludge resulted in dissolved concentrations of these metals that were significantly lower than those predicted to result from dissolution of the carbonate fraction of the sludge. This may suggest that cationic Zn, Cu, Cd and Co remobilised from dissolving calcite, gypsum and Al oxyhydroxides were readsorbed onto Fe oxyhydroxides remaining stable under oxic conditions. In a long-term perspective (≳10² a), ⩾97% of the Cd, Co, Cu, Ni, Pb and Zn content of the sludge potentially is available for release by dissolution of calcite and reductive dissolution of Fe oxyhydroxides if the sludge is subject to a soil environment with lower dissolved Ca concentrations, pH and redox than in the impoundment.     

Continuous growth of hydrogenetic ferromanganese crusts since 17 Myr ago on Takuyo-Daigo Seamount,NW Pacific,at water depths of 800–5500 m

Ferromanganese crusts cover all outcrops on Takuyo-Daigo seamount traversed during remotely operated underwater vehicle (ROV) dives, except in places covered by foraminifera sand. Takuyo-Daigo is a Cretaceous seamount located in the northwest Pacific Ocean. Geological and bathymetric mapping provide the framework for this study. Chemical and mineralogical analyses of the hydrogenetic ferromanganese crusts show temporal and spatial variations typical of those found in previous studies. Outcrops from 800 to 5500 m water depths are covered with ferromanganese crusts up to 105 mm thick. Beryllium isotope dating shows that the crusts have apparently been growing continuously at all water depths, even through the modern oxygen minimum zone (OMZ), contrary to some earlier models for deposition. Growth rates vary from 2.3 to 3.5 mm/Myr, with Fe or Mn fluxes of 0.07–0.11 g/cm²/Myr since the early-middle Miocene. Co/Mn ratios decrease with water depth while Fe/Mn and other metallic elements increase or show no change, based on the analysis of the uppermost crust surface. This is probably because Co is the most abundant redox-sensitive element derived from seawater that occurs in crusts.     

Formation age of the dual structure and environmental change recorded in hydrogenetic ferromanganese crusts from Northwest and Central Pacific seamounts

Thick hydrogenetic ferromanganese (FeMn) crusts from the northwest and central Pacific seamounts often show a distinct dual structure composed of a typical hydrogenetic porous, friable upper part of FeMn oxides (Layer 1) and the underlying dense, hard phosphatized growth generation of FeMn oxides (Layer 2 in this study). Layer 2 always appears above the substrate rock and composes the lower part of the crust; it is never found as the upper crust layer in contact with seawater. The chemical composition of Layer 2 clearly differs from the younger Layer 1 hydrogenetic FeMn oxides, and is depleted in Fe, Al, Ti, and Co, and enriched in Ni, Cu, and Zn relative to Layer 1. The Be isotope age models of the crusts were refined with paleomagnetic and paleontological information, and applied to selected crust samples. The age model indicates fairly continuous growth from the substrate to the surface and fairly constant growth rates during the past 17 Ma. The growth rate from the Miocene to the present has varied by a factor of two, about 2–4 mm/Myr in Layer 1, while Layer 2 has similar but more variable growth rates than Layer 1.The calculated age for the base of Layer 1, and possibly the age of termination of phosphatization, is never younger than the late Miocene. The age seems to vary with water depth, shallower-water crusts (between 991 and 1575 m) showing a younger age of about 10 Ma whereas the deeper-water (2262 m) crusts have extrapolated ages for the base of Layer 1 of be 17.1 ± 2.5 Ma. This trend indicates that phosphatization took place in a less-oxidizing environment during growth of Layer 2, followed by a weakened oxygen-minimum zone or intensified AABW during growth of Layer 1.     

Colloidal and truly dissolved metal(oid) fractionation in sediment pore waters using tangential flow filtration

The partitioning of trace metal(oid)s between colloidal and “truly” dissolved fractions in sediment pore waters is often overlooked due to the analytical challenge; indeed, only small volumes are available and filtration membranes are rapidly clogged. Moreover, metal(oid)s are subject to co-precipitate with Fe. In this study, tangential flow filtration (TFF) was assessed for the fractionation of Fe, Mn, Cu, As, Co, Ni, Zn and Cd in sediment pore waters with a 5 kDa cut-off size membrane. Five natural sediments were collected and used for different tests. Results on blank samples showed that this technique was appropriate for Fe, Mn, Co, Zn, As and Cd. Although the applied concentration factors (CF) were low (<7.4) due to the small available volume of pore waters (50 mL), it was shown that colloidal concentrations obtained from the TFF procedure were similar whatever the applied concentration factor. The mass balance approach showed satisfying results (100 ± 25%) for Mn, Co, Zn and As. Mass balances were higher than 130% and highly variable for Cd, Ni and Cu. For Fe, mass balance was reproducible but low (71 ± 10%), probably due to sorption of positively charged Fe oxides on the membrane. Applying this method to five contrasting metal(oid)-contaminated sediments, it was shown that Mn, As, Co and Fe were mainly present in the “truly” dissolved phase (<5 kDa). This technique is a necessary step to assess sediment toxicity and bioavailability of metal(oid)s and could be of great interest for emergent pollutants such as nanometals.     

Seasonal variations of arsenic at the sediment–water interface of Poyang Lake,China

Arsenic species including arsenite, arsenate, and organic arsenic were measured in the porewaters collected from Poyang Lake, the largest freshwater lake of China. The vertical distributions of dissolved arsenic species and some diagenetic constituents [Fe(II), Mn(II), S(−II)] were also obtained in the same porewater samples in summer and winter. In sediments the concentration profiles of total As and As species bound to Fe–Mn oxyhydroxides and to organic matter were also determined along with the concentrations of Fe, Mn and S in different extractable fractions. Results indicate that, in the summer season, the concentrations of total dissolved As varying from 3.9 to 55.8 μg/L in sediments were higher than those (5.3–15.7 μg/L) measured in the winter season, while the concentrations of total As species in the solid phase varied between 10.97 and 25.32 mg/kg and between 7.84 and 30.52 mg/kg on a dry weight basis in summer and winter, respectively. Seasonal profiles of dissolved As suggest downward and upward diffusion, and the flux of dissolved As across the sediment–water interface (SWI) in summer and winter were estimated at 3.88 mg/m² a and 0.79 mg/m² a, respectively. Based on porewater profiles and sediment phase data, the main geochemical behavior of As was controlled by adsorption/desorption, precipitation and molecular diffusion. The solubility and migration of inorganic As are controlled by Fe–Mn oxyhydroxides in summer whereas they appear to be more likely controlled by both amorphous Fe–Mn oxyhydroxides and sulfides in winter. A better knowledge of the cycle of As in Poyang Lake is essential to a better management of its hydrology and for the environmental protection of biota in the lake.     

Geochemistry and U-series dating of Holocene and fossil marine hydrothermal manganese deposits from the Izu-Ogasawara arc

This study investigated Holocene and fossil hydrothermal manganese deposits in the Izu-Ogasawara arc. Mineralogically, these deposits comprise 10 Å and 7 Å manganate minerals, and the fossil samples showed higher 10 Å stabilities. Chemical compositions of the Holocene samples are typical of other hydrothermal manganese deposits, including low Fe/Mn ratios, low trace metals, and low rare earth elements. Although the fossil samples generally have similar chemical characteristics, they exhibit significant enrichment in Ni, Cu, Zn, Cd, Ba, REE, Tl, and Pb contents. Furthermore, the chondrite-normalized REE patterns showed more light REE enrichment trends. These chemical characteristics suggest post-depositional uptake of these metals from seawater. U-Th dating of a Holocene hydrothermal manganese deposit from the Kaikata Seamount indicated 8.8 ± 0.94 ka for the uppermost layer and downward growth beneath the seafloor with a growth rate of ca. 2 mm/kyr. This is approximately three orders of magnitude faster than that of hydrogenetic ferromanganese crusts. U-Pb age of a fossil hydrothermal manganese deposit from the Nishi-Jokyo Seamount showed 4.4 ± 1.6 Ma, which was contemporary with basaltic volcanism (5.8 ± 0.3 Ma). Hydrothermal manganese deposits contain high concentrations of high value Mn, but only small amounts of valuable minor metals; their ages constrain the periods of past hydrothermal activity and provide a vector to explore for polymetallic sulfide deposits.     

Ferromanganese oxide deposits from the Central Pacific Ocean,II. Nodules and associated sediments

Bulk chemical, mineralogical and selective leach analyses have been made on a suite of abyssal ferromanganese nodules and associated sediments from the S.W. equatorial Pacific Ocean. Compositional relations between nodules, sediment oxyhydroxides and nearby ferromanganese encrustations are drawn assuming that the crusts represent purely hydrogenetic ferromanganese material. Crusts, δMnO₂-rich nodules and sediment oxyhydroxides are compositionally similar and distinct from diagenetic todorokitebearing nodules. Compared to Fe-Mn crusts, sediment oxyhydroxides are however slightly enriched, relative to Mn and Ni, in Fe, Cu, Zn, Ti and Al, and depleted in Co and Pb, reflecting processes of non-hydrogenous element supply and diagenesis. δMnO₂ nodules exhibit compositions intermediate between Fe-Mn crusts and sediment oxyhydroxides and thus are considered to accrete oxides from both the water column and associated sediments.Deep ocean vertical element fluxes associated with large organic aggregates, biogenic calcite, silica and soft parts have been calculated for the study area. Fluxes associated with organic aggregates are one to three orders of magnitude greater than those associated with the other phases considered, are in good agreement with element accumulation rates in sediments, and are up to four orders of magnitude greater than element accumulation rates in nodules. Metal release from labile biogenic material in surface sediments can qualitatively explain the differences between the composition of Fe-Mn crusts and sediment oxyhydroxides.Todorokite-rich diagenetic nodules are confined to an eastwards widening equatorial wedge. It is proposed that todorokite precipitates directly from interstitial waters. Since the transition metal chemistry of interstitial waters is controlled dominantly by reactions involving the breakdown of organic carbon, the supply and degradation rate of organic material is a critical factor in the formation of diagenetic nodules. The wide range of (trace metal/Mn) ratios observed in marine todorokite reflects a balance between the release of trace metals from labile biogenic phases and the reductive remobilisation of Mn oxide, both of which are related to the breakdown of organic carbon.     

Trace metal speciation in sea and pore water of the Gotland Deep,Baltic Sea, 1994

Studies on the speciation (particulate, colloidal, anionic and cationic forms) of trace metals (Cd, Co, Cu, Fe, Mn, Mo, Ni, Pb, Zn) in the water column and in pore waters of the Gotland Deep following the 1993/94 salt-water inflows showed dramatic changes in the total “dissolved” metal concentrations and in the ratios between different metal species in the freshly re-oxygenated waters below 125 m. Changes in concentrations were greatest for those metals for which the solubility differs with the redox state (Fe, Mn, Co) but were also noted for those metals which form insoluble sulphides (Cd, Pb, Cu, Zn) and/or stable complexes with natural ligands (Cu). Pore water data from segmented surface muds (0–200 mm) indicated that significant redox and related metal speciation changes took place in the surface sediments only a few weeks after the inflow of the oxygenated sea water into the Gotland Deep.     

In-situ LA-ICP-MS trace elemental analyses of magnetite: The Bayan Obo Fe-REE-Nb deposit,North China

The Bayan Obo Fe-REE-Nb deposit in northern China is the world's largest light REE deposit, and also contains considerable amounts of iron and niobium metals. Although there are numerous studies on the REE mineralization, the origin of the Fe mineralization is not well known. Laser ablation (LA) ICP-MS is used to obtain trace elements of Fe oxides in order to better understand the process involved in the formation of magnetite and hematite associated with the formation of the giant REE deposit. There are banded, disseminated and massive Fe ores with variable amounts of magnetite and hematite at Bayan Obo. Magnetite and hematite from the same ores show similar REE patterns and have similar Mg, Ti, V, Mn, Co, Ni, Zn, Ga, Sn, and Ba contents, indicating a similar origin. Magnetite grains from the banded ores have Al + Mn and Ti + V contents similar to those of banded iron formations (BIF), whereas those from the disseminated and massive ores have Al + Mn and Ti + V contents similar to those of skarn deposits and other types of magmatic-hydrothermal deposits. Magnetite grains from the banded ores with a major gangue mineral of barite have the highest REE contents and show slight moderate REE enrichment, whereas those from other types of ores show light REE enrichment, indicating two stages of REE mineralization associated with Fe mineralization. The Bayan Obo deposit had multiple sources for Fe and REEs. It is likely that sedimentary carbonates provided original REEs and were metasomatized by REE-rich hydrothermal fluids to form the giant REE deposit.     

Mechanisms controlling acid neutralization and metal mobility within a Ni-rich tailings impoundment

Low-quality pore waters containing high concentrations of dissolved H⁺, SO₄, and metals have been generated in the East Tailings Management Area at Lynn Lake, Manitoba, as a result of sulfide-mineral oxidation. To assess the abundance, distribution, and solid-phase associations of S, Fe, and trace metals, the tailings pore water was analyzed, and investigations of the geochemical and mineralogical characteristics of the tailings solids were completed. The results were used to delineate the mechanisms that control acid neutralization, metal release, and metal attenuation. Migration of the low-pH conditions through the vadose zone is limited by acid-neutralization reactions, resulting in the development of distinct pore-water pH zones at depth; the neutralization reactions involve carbonate (pH ⩾ 5.7), Al-hydroxide (pH ⩾ 4.0), and aluminosilicate solids. As the zone of low-pH pore water expands, the pH will then be primarily controlled by less soluble solids, such as Fe(III) oxyhydroxides (pH < 3.5) and the relatively more recalcitrant aluminosilicates (pH ⩾ 1.3). Precipitation/dissolution reactions involving secondary Fe(III) oxyhydroxides and hydroxysulfates control the concentrations of dissolved Fe(III). Concentrations of dissolved SO₄ are principally controlled by the formation of gypsum and jarosite. Geochemical extractions indicate that the solid-phase concentrations of Ni, Co, and Zn are associated predominantly with reducible and acid-soluble fractions. The concentrations of dissolved trace metals are therefore primarily controlled by adsorption/complexation and (or) co-precipitation/dissolution reactions involving secondary Fe(III) oxyhydroxide and hydroxysulfate minerals. Concentrations of dissolved metals with relatively low mobility, such as Cu, are also controlled by the precipitation of discrete minerals. Because the major proportion of metals is sequestered through adsorption and (or) co-precipitation, the metals are susceptible to remobilization if low-pH or reducing conditions develop within the tailings.     

Chemical and physical properties of iron hydroxide precipitates associated with passively treated coal mine drainage in the Bituminous Region of Pennsylvania and Maryland

Changes in precipitate mineralogy, morphology, and major and trace element concentrations and associations throughout 5 coal mine drainage (CMD) remediation systems treating discharges of varying chemistries were investigated in order to determine the factors that influence the characteristics of precipitates formed in passive systems. The 5 passive treatment systems sampled in this study are located in the bituminous coal fields of western Pennsylvania and northern Maryland, and treat discharges from Pennsylvanian age coals. The precipitates are dominantly (>70%) goethite. Crystallinity varies throughout an individual system, and lower crystallinity is associated with enhanced sorption of trace metals. Degree of crystallinity (and subsequently morphology and trace metal associations) is a function of the treatment system and how rapidly Fe(II) is oxidized, forms precipitates, aggregates and settles. Precipitates formed earlier in the passive treatment systems tend to have the highest crystallinity and the lowest concentrations of trace metal cations. High surface area and cation vacancies within the goethite structure enable sorption and incorporation of metals from coal mine drainage-polluted waters. Sorption affinities follow the order of Zn > Co ≈ Ni > Mn. Cobalt and Ni are preferentially sorbed to Mn oxide phases when these phases are present. As pH increases in the individual CMD treatment systems toward the pH_pzc of goethite, As sorption decreases and transition metal (Co, Mn, Ni and Zn) sorption increases. Sulfate, Na and Fe(II) concentrations may all influence the sorption of trace metals to the Fe hydroxide surface. Results of this study have implications not only for solids disposal and resource recovery but also for the optimization of passive CMD treatment systems.     

In-situ LA-ICP-MS trace elemental analyses of magnetite and Re–Os dating of pyrite: The Tianhu hydrothermally remobilized sedimentary Fe deposit,NW China

The Tianhu Fe deposit (> 104 Mt at 42% TFe) in the Eastern Tianshan (NW China) is hosted in the schist, quartzite, marble, and amphibolite of the Neoproterozoic Tianhu Group. The deposit consists of disseminated, banded and massive ores. Metallic minerals are dominantly magnetite and pyrite, with minor titanite, pyrrhotite, chalcopyrite, and sphalerite. Gangue minerals include dolomite with minor forsterite, diopside, apatite, biotite, chlorite, tourmaline, tremolite, talc, calcite, and magnesite. Pyrite separates from ores have 10.7 to 54.7 ppb Re and 0.033 to 0.175 ppb common Os. Those from the massive ores have a model 1 isochron age of 535 ± 36 Ma (2σ), in agreement with the isochron age (528 ± 18 Ma) of pyrite from the banded ores by regression of seven Re–Os analyses. The Re–Os age of ~ 530 Ma reflects the timing of a hydrothermal event that remobilized the Tianhu deposit. Magnetite has Mg, Al, Ti, V, Mn, Zn, and Ga contents ranging from ~ 5 to 3500 ppm and Cr, Co, Ni, and Sn contents ranging from ~ 1 to 200 ppm. Most magnetite grains have Ca + Al + Mn and Ti + V contents similar to those of the banded iron formation (BIF). Some grains have elevated Ti and V contents, indicating that that magnetite was formed by sedimentary process and overprinted by hydrothermal activity. Pyrite has δ³⁴S_CDT values from − 9.23 to 10.96‰, indicating that the sulfur was reduced from the marine sulfates either by bacterial or thermochemical processes. Pyrite has relatively high Co (~ 346 to 3274 ppm) but low Ni (~ 5.6 to 35.4 ppm) with Co/Ni ratios ranging from ~ 10 to 270, indicating remobilization from a volcanic–hydrothermal fluid. Therefore, the Tianhu Fe deposit was originally a sedimentary type deposit but was overprinted by a hydrothermal event related to volcanic activity.     

Geochemical associations for evaluating the availability of potentially harmful elements in urban soils: Lessons learnt from Athens,Greece

The estimation of potentially harmful element (PHE) availability in urban soil is essential for evaluating impending risks for human and ecosystem health. In the present study five single extraction procedures were evaluated based on the analysis of 45 urban top-soil samples from Athens, Greece. The pseudototal (aqua regia), potentially phytoavailable (0.05 M EDTA), mobilizable (0.43 M HAc), bioaccessible (0.4 M glycine) and reactive pools (0.43 M HNO₃) of PHEs were determined. In general, geogenic elements in Athens soil (Ni, Cr, Co, As) are relatively less available than typical tracers of anthropogenic contamination (Pb, Zn, Cu, Cd). Results of principal component analysis (PCA) indicate an association between available fractions of Pb, Cu, Zn, Cd and amorphous Fe oxides, whereas amorphous Mn oxides account for the available concentrations of Mn, Ni and Co. Empirical multiple linear regression models demonstrate that pseudototal concentration is the predominant explanatory factor of variability for the available pools of the anthropogenic elements. Major elemental composition and total organic carbon (TOC) improve the predictions for the geogenic group of elements, although the explained variability remains low. Dilute HNO₃ is a better predictor of Zn, Ni, As and Mn availability, whereas Pb and Cu available fractions are predicted more accurately by the classical aqua regia protocol. This study contributes to the international database on the environmental behavior of PHEs and provides additional knowledge that can be used toward the harmonization of chemical extraction methodology in urban soil.     

Origin of native sulfur ball from the Kueishantao hydrothermal field offshore northeast Taiwan: Evidence from trace and rare earth element composition

We first report the trace and rare earth element compositions of native sulfur ball with sulfur contents varying from 97.08 wt.% to 99.85 wt.% from the Kueishantao hydrothermal field, off NE Taiwan. We then discuss the sources of trace and rare earth elements incorporated into the native sulfur ball during formation. Comparison of our results with native sulfur from crater lakes and other volcanic areas shows the sulfur content of native sulfur ball from the Kueishantao hydrothermal field is very high, and that the rare earth element (REE) and trace element constituents of the native sulfur balls are very low (∑REE < 35 ppb). In the native sulfur ball, V, Cr, Co, Ni, Nb, Rb, Cs, Ba, Pb, Th, U, Al, Ti and REE are mostly derived from andesite; Mg, K and Mn are mostly derived from seawater; and Fe, Cu, Zn and Ni are partly derived from magma. Based on the sulfur contents, trace and rare earth element compositions, and local environment, we suggest that the growth of the native sulfur ball is significantly slower than that of native sulfur chimneys, which results in the relatively higher contents of trace and rare earth element contents in the native sulfur ball than in the native sulfur chimneys from the Kueishantao hydrothermal field. Finally, we suggest a “glue pudding” growth model for understanding the origin of the native sulfur ball in the Kueishantao hydrothermal field, whereby the native sulfur ball forms from a mixture of oxygenated seawater and acidic, low-temperature hydrothermal fluid with H₂S and SO₂ gases, and is subsequently shaped by tidal and/or bottom currents.     

Assessment of trace metal and rare earth elements contamination in rivers around abandoned and active mine areas. The case of Lubumbashi River and Tshamilemba Canal,Katanga, Democratic Republic of the Congo

Active and abandoned mine activities constitute the sources of deterioration of water and soil quality in many parts of the world, particularly in the African Copperbelt regions. The accumulation in soils and the release of toxic substances into the aquatic ecosystem can lead to water resources pollution and may place aquatic organisms and human health at risk. In this study, the impact of past mining activity (i.e., abandoned mine) on aquatic ecosystems has been studied using ICP-MS analysis for trace metals and Rare Earth Elements (REE) in sediment samples from Lubumbashi River (RL) and Tshamilemba Canal (CT), Katanga, Democratic Republic of the Congo (DRC). Soil samples from surrounding CT were collected to evaluate trace metal and REE concentrations and their spatial distribution. The extent of trace metal contamination compared to the background area was assessed by Enrichment Factor (EF) and Geoaccumulation Index (I_geo). Additionally, the trace metal concentrations probable effect levels (PELs) for their potential environmental impact was achieved by comparing the trace metal concentrations in the sediment/soil samples with the Sediment Quality Guidelines (SQGs). Spearman's Rank-order correlation was used to identify the source and origin of contaminants. The results highlighted high concentrations of trace metals in surface sediments of CT reaching the values of 40152, 15586, 610, 10322, 60704 and 15152 mg kg⁻¹ for Cu, Co, Zn, Pb, Fe and Mn, respectively. In the RL, the concentrations reached the values of 24093, 2046, 5463, 3340, 68290 and 769 mg kg⁻¹ for Cu, Co, Zn, Pb, Fe and Mn, respectively. The ΣREE varied from 66 to 218 and 142–331 mg kg⁻¹ for CT and RL, respectively. The soil samples are characterized by variable levels of trace metals. The EF analysis showed “extremely severe enrichment” for Cu and Co. However, no enrichment was observed for REE. Except for Mo, Th, U, Eu, Mo, Ho and Tm for which Igeo is classified as “moderately polluted and/or unpolluted”, all elements in different sites are classified in the class 6, “extremely polluted”. The trace metal concentrations in all sampling sites largely exceeded the SQGs and the PELs for the Protection of Aquatic Life recommendation. Cu and Co had positive correlation coefficient values (r = 0.741, P < 0.05, n = 14). This research presents useful tools for the evaluation of water contamination in abandoned and active mining areas.     

Extreme positive Ce-anomalies in a 3.0 Ga submarine volcanic sequence,Murchison Province: Oxygenated marine bottom waters

Systematic positive anomalies of Ce, where Ce/Ce* spans 2.1 to 11.4, are present in basalts and rhyolites of a 2.96 Ga submarine volcanic sequence of the Murchison Province, Western Australia. This volcanic sequence is host to a stratabound Cu–Zn deposit that formed on the seafloor from a seawater hydrothermal system. These are true Ce anomalies as Pr/Pr* < 1. In modern oxygenated marine water Ce is sequestered by Mn-oxides and hydroxides, which coprecipitate with Fe-oxides and hydroxides as nodules and crusts on the ocean floor, as well as Fe–Mn chemical sediments from hydrothermal systems at ocean spreading centers. Fe–Mn sediments have positive Ce anomalies and marine water complementary negative anomalies. Such Ce anomalies have not formerly been reported for Archean hydrothermally altered volcanic rocks. These extreme anomalies are attributed to Mn-transport in shallow-circulating oxygenated marine bottom waters peripheral to the deeper, hotter, hydrothermal system from which the Cu–Zn deposit formed, and record an oxygenated marine environment ~ 500 Ma before the so-called great oxidation event at ~ 2.4 Ga. Results for positive Ce anomalies in the Golden Grove volcanic sequence are complementary to negative anomalies in Archean BIF, collectively stemming from particulate scavenging of Ce^+ 3 in an oxic water column.     

Using cocrystallization coefficients of isomorphous admixtures for determination of element concentrations in ore-forming solutions (by the example of Mn/Fe ratio in magnetite)

The cocrystallization coefficient of Mn and Fe (D_Mn/Fe) in magnetite crystals is determined in hydrothermal-growth experiments with internal sampling at 450 and 500 °C and 100 MPa (1 kbar). It is weakly dependent on temperature in the studied PT-region and is constant over a wide range of Mn/Fe values. This permits using the magnetite composition as an indicator of Mn/Fe in the fluid under equilibrium: (Mn/Fe)_aq ≈ 100 (Mn/Fe)_mt. Since Mn is often a macrocomponent of the fluid and a microcomponent of magnetite, local analysis of fluid inclusions for Mn might help to determine Fe even in iron minerals. This will permit evaluation of the contents of other ore metals if the D_Me/Fe values are known. For fine crystals (< 0.1–0.2 mm) with low contents of Mn (< 0.01–0.02%), it is necessary to take into account the fractionation of Mn into the surficial nonautonomous phase, in which its content can reach several percent. Comparison of these data with earlier data on the distribution of Mn in the system magnetite–pyrite–pyrrhotite–greenockite–hydrothermal solution shows that D_Mn/Fe remains constant in the presence of sulfur and sulfides. Precipitation of magnetite, in which Mn is a compatible admixture, cannot affect radically Mn/Fe in the solution because of the low D_Mn/Fe value. This effect is still more unlikely for pyrrhotite and pyrite, in which Mn is an incompatible admixture. The most probable mechanism of Mn fractionation into the solid phase is crystallization of FeOOH at lower temperatures. This is indirectly supported by the strong fractionation of Mn into the nonautonomous oxyhydroxide phase on the surface of magnetite crystals. The necessity of a more rigorous validation of “the new Fe/Mn geothermometer for hydrothermal systems” is substantiated.     

Arsenic attenuation in geothermal streamwater coupled with biogenic arsenic(III) oxidation

In the present study, we investigated As behavior in a high-As hot spring (Sambe hot spring, Shimane, Japan) by coupling direct chemical speciation by synchrotron-based XAFS and HPLC–ICP-MS with microbial As-redox transformation gene analysis. The concentration of soluble As in the spring streamwater decreased immediately along the flow in correlation with Fe behavior, indicating that As in the streamwater was naturally attenuated in the streamwater. Iron XAFS analysis suggested deposition of Fe(III) oxyhydroxides along the flow. Thus, considering the strong affinity of As to Fe oxyhydroxides, the observed attenuation in As was possibly caused by sorption (or incorporation) of As on Fe(III) oxyhydroxides. Both dissolved As(III) and As(V) were present in the aqueous phase, and As(III) was rapidly oxidized to As(V) (<30 s) along the flow. The oxidation kinetics indicated the occurrence of biotic As(III) oxidation, because obtained As(III) oxidation rate (6.7–7.8 μM min⁻¹) was much faster than the reported abiotic oxidation rates. Furthermore, the bacterial arsenite oxidase gene (aioA) was detected in DNA extracted from all samples (average of 2.0 × 10⁵ copies dry g⁻¹), which also supported potential attributes of biological As(III) oxidation in situ. In solid phase samples from sampling points analyzed by XAFS, most of the As existed as oxidized pentavalent form, As(V). This result indicated that this form was preferentially partitioned to the solid phase because of the much higher affinity of As(V) than of As(III) to Fe(III) oxyhydroxides. Considering the kinetic and microbiological findings, it is indicated that biotic process was predominantly responsible for As(III) oxidation at the present site, and this biotic As(III) oxidation to As(V) controlled the observed attenuation of As, because oxidized As(V) was removed from the aqueous phase by Fe(III) oxyhydroxides more efficiently.     

Critical metals in manganese nodules from the Cook Islands EEZ,abundances and distributions

The Cook Islands (CIs) Exclusive Economic Zone (EEZ) encompasses 1,977,000 km² and includes the Penrhyn and Samoa basins abyssal plains where manganese nodules flourish due to the availability of prolific nucleus material, slow sedimentation rates, and strong bottom currents. A group of CIs nodules was analyzed for mineralogical and chemical composition, which include many critical metals not before analyzed for CIs nodules. These nodules have varying sizes and nuclei material; however all are composed predominantly of δ-MnO₂ and X-ray amorphous iron oxyhydroxide. The mineralogy, Fe/Mn ratios, rare earth element contents, and slow growth rates (mean 1.9 mm/10⁶ years) reflect formation primarily by hydrogenetic precipitation. The paucity of diagenetic input can be explained by low primary productivity at the surface and resultant low organic matter content in seafloor sediment, producing oxic seafloor and sub-seafloor environments. The nodules contain high mean contents of Co (0.41%), Ni (0.38%), Ti (1.20%), and total rare earth elements plus yttrium (REY; 0.167%), and also high contents of Mo, Nb, V, W, and Zr.Compiled data from a series of four cruises by the Japan International Cooperation Agency and the Mining agency of Japan from 1985 to 2000 were used to generate a map that defines the statistical distribution of nodule abundance throughout the EEZ, except the Manihiki Plateau. The abundance distribution map shows a belt of high nodule abundance (19–45 kg/m²) that starts in the southeast corner of the EEZ, runs northwest, and also bifurcates into a SW trending branch. Small, isolated areas contain abundances of nodules of up to 58 kg/m². Six ~ 20,000 km² areas of particularly high abundance were chosen to represent potential exploration areas, and maps for metal concentration were generated to visualize metal distribution and to extrapolate estimated metal tonnages within the six sites and the EEZ as a whole. Grades for Mn, Cu, and Ni are low in CIs nodules in areas of high abundance; however, Ti, Co, and REY show high contents where nodule abundances are high. Of the six areas identified to represent a range of metal contents, one at the northern end of the N-S abundance main belt optimizes the most metals and would yield the highest dry metric tons for Mn (61,002,292), Ni (1,247,834), Mo (186,166), V (356,247), W (30,215), and Zr (195,323). When compared with the Clarion–Clipperton Zone, the CIs nodules show higher nodule abundances (> 25 kg/m² over ~ 123,844 km²), and are more enriched in the green-tech, high-tech, and energy metals Co, Ti, Te, Nb, REY, Pt, and Zr. The CIs EEZ shows a significant resource potential for these critical metals due to their high prices, high demand, and the high nodule abundance, which will allow for a smaller footprint for a 20-year mine site and therefore smaller environmental impact.