The offset‐midpoint travel‐time pyramid for P‐wave in 2D transversely isotropic media with a tilted symmetry axis

For pre‐stack phase‐shift migration in homogeneous isotropic media, the offset‐midpoint travel time is represented by the double‐square‐root equation. The travel time as a function of offset and midpoint resembles the shape of Cheops’ pyramid. This is also valid for transversely isotropic media with a vertical symmetry axis. In this study, we extend the offset‐midpoint travel‐time pyramid to the case of 2D transversely isotropic media with a tilted symmetry axis. The P‐wave analytical travel‐time pyramid is derived under the assumption of weak anelliptical property of the tilted transverse isotropy media. The travel‐time equation for the dip‐constrained transversely isotropic model is obtained from the depth‐domain travel‐time pyramid. The potential applications of the derived offset‐midpoint travel‐time equation include pre‐stack Kirchhoff migration, anisotropic parameter estimation, and travel‐time calculation in transversely isotropic media with a tilted symmetry axis.     

Traveltime computation with the linearized eikonal equation for anisotropic media

A linearized eikonal equation is developed for transversely isotropic (TI) media with a vertical symmetry axis (VTI). It is linear with respect to perturbations in the horizontal velocity or the anisotropy parameter η. An iterative linearization of the eikonal equation is used as the basis for an algorithm of finite-difference traveltime computations. A practical implementation of this iterative technique is to start with a background model that consists of an elliptically anisotropic, inhomogeneous medium, since traveltimes for this type of medium can be calculated efficiently using eikonal solvers, such as the fast marching method. This constrains the perturbation to changes in the anisotropy parameter η (the parameter most responsible for imaging improvements in anisotropic media). The iterative implementation includes repetitive calculation of η from traveltimes, which is then used to evaluate the perturbation needed for the next round of traveltime calculations using the linearized eikonal equation. Unlike isotropic media, interpolation is needed to estimate η in areas where the traveltime field is independent of η, such as areas where the wave propagates vertically.
Typically, two to three iterations can give sufficient accuracy in traveltimes for imaging applications. The cost of each iteration is slightly less than the cost of a typical eikonal solver. However, this method will ultimately provide traveltime solutions for VTI media. The main limitation of the method is that some smoothness of the medium is required for the iterative implementation to work, especially since we evaluate derivatives of the traveltime field as part of the iterative approach. If a single perturbation is sufficient for the traveltime calculation, which may be the case for weak anisotropy, no smoothness of the medium is necessary. Numerical tests demonstrate the robustness and efficiency of this approach.     

Calculating complex‐valued P‐wave first‐arrival traveltimes in attenuative vertical transversely isotropic media with an irregular surface

The complex‐valued first‐arrival traveltime can be used to describe the properties of both velocity and attenuation as seismic waves propagate in attenuative elastic media. The real part of the complex‐valued traveltime corresponds to phase arrival and the imaginary part is associated with the amplitude decay due to energy absorption. The eikonal equation for attenuative vertical transversely isotropic media discretized with rectangular grids has been proven effective and precise to calculate the complex‐valued traveltime, but less accurate and efficient for irregular models. By using the perturbation method, the complex‐valued eikonal equation can be decomposed into two real‐valued equations, namely the zeroth‐ and first‐order traveltime governing equations. Here, we first present the topography‐dependent zeroth‐ and first‐order governing equations for attenuative VTI media, which are obtained by using the coordinate transformation from the Cartesian coordinates to the curvilinear coordinates. Then, we apply the Lax–Friedrichs sweeping method for solving the topography‐dependent traveltime governing equations in order to approximate the viscosity solutions, namely the real and imaginary parts of the complex‐valued traveltime. Several numerical tests demonstrate that the proposed scheme is efficient and accurate in calculating the complex‐valued P‐wave first‐arrival traveltime in attenuative VTI media with an irregular surface.     

Weak‐anisotropy approximation for P‐wave reflection coefficient at the boundary between two tilted transversely isotropic media

Existing and commonly used in industry nowadays, closed‐form approximations for a P‐wave reflection coefficient in transversely isotropic media are restricted to cases of a vertical and a horizontal transverse isotropy. However, field observations confirm the widespread presence of rock beds and fracture sets tilted with respect to a reflection boundary. These situations can be described by means of the transverse isotropy with an arbitrary orientation of the symmetry axis, known as tilted transversely isotropic media. In order to study the influence of the anisotropy parameters and the orientation of the symmetry axis on P‐wave reflection amplitudes, a linearised 3D P‐wave reflection coefficient at a planar weak‐contrast interface separating two weakly anisotropic tilted tranversely isotropic half‐spaces is derived. The approximation is a function of the incidence phase angle, the anisotropy parameters, and symmetry axes tilt and azimuth angles in both media above and below the interface. The expression takes the form of the well‐known amplitude‐versus‐offset “Shuey‐type” equation and confirms that the influence of the tilt and the azimuth of the symmetry axis on the P‐wave reflection coefficient even for a weakly anisotropic medium is strong and cannot be neglected. There are no assumptions made on the symmetry‐axis orientation angles in both half‐spaces above and below the interface. The proposed approximation can be used for inversion for the model parameters, including the orientation of the symmetry axes. Obtained amplitude‐versus‐offset attributes converge to well‐known approximations for vertical and horizontal transverse isotropic media derived by Rüger in corresponding limits. Comparison with numerical solution demonstrates good accuracy.     

Traveltime computation for 3D anisotropic media by a finite-difference perturbation method

The first-order perturbation theory is used for fast 3D computation of quasi-compressional (qP)-wave traveltimes in arbitrarily anisotropic media. For efficiency we implement the perturbation approach using a finite-difference (FD) eikonal solver. Traveltimes in the unperturbed reference medium are computed with an FD eikonal solver, while perturbed traveltimes are obtained by adding a traveltime correction to the traveltimes of the reference medium. The traveltime correction must be computed along the raypath in the reference medium. Since the raypath is not determined in FD eikonal solvers, we approximate rays by linear segments corresponding to the direction of the phase normal of plane wavefronts in each cell. An isotropic medium as a reference medium works well for weak anisotropy. Using a medium with ellipsoidal anisotropy as a background medium in the perturbation approach allows us to consider stronger anisotropy without losing computational speed. The traveltime computation in media with ellipsoidal anisotropy using an FD eikonal solver is fast and accurate. The relative error is below 0.5% for the models investigated in this study. Numerical examples show that the reference model with ellipsoidal anisotropy allows us to compute the traveltime for models with strong anisotropy with an improved accuracy compared with the isotropic reference medium.     

轴对称各向异性介质波动方程深度偏移的对称非平稳相移方法

由所建立的三维qP波相速度表示式出发，导出并解析求解各向异性介质中的频散方程，得到三维各向异性介质中的相移算子，进而将以相移算子为基础的对称非平稳相移方法推广到各向异性介质，发展了一个三维各向异性介质的深度偏移方法. 文中使用的各向异性介质的速度模型与现行的各向异性构造的速度估计方法一致，将各向同性、弱各向异性及强各向异性统一在一个模型中. 所建立的各向异性介质对称非平稳相移波场延拓算子可以同时适应速度及各向异性参数横向变化；文中给出的算例虽然是针对二维VTI介质的，但所提出的算法同样适用于三维TI介质.     

曲线坐标系程函方程的求解方法研究

笛卡尔坐标系中经典的程函方程在静校正、叠前偏移、走时反演、地震定位、层析成像等许多地球物理工作都有应用,然而用其计算起伏地表的地震波走时时却比较困难.我们通过把曲线坐标系中的矩形网格映射到笛卡尔坐标系的贴体网格推导出了曲线坐标中的程函方程,此时,曲线坐标系的程函方程呈现为各向异性的程函方程(尽管在笛卡尔坐标系中介质是各向同同性的).然后尝试用求解各向同性程函方程的快速推进法和Lax-Friedrichs快速扫描算法来分别求解该方程.数值试验表明未加考虑各向异性程函方程与各向同性程函方程的差别而把求解各向同性程函方程的快速推进法直接拓展到曲线坐标中的程函方程的做法是错误的,而Lax-Friedrichs快速扫描算法总能稳定地求解曲线坐标系的程函方程,进而有效地处理了地表起伏的情况,得到稳定准确的计算结果.     

Depth migration anisotropy analysis in the time domain

In areas of complex geology such as the Canadian Foothills, the effects of anisotropy are apparent in seismic data and estimation of anisotropic parameters for use in seismic imaging is not a trivial task. Here we explore the applicability of common‐focus point (CFP)‐based velocity analysis to estimate anisotropic parameters for the variably tilted shale thrust sheet in the Canadian Foothills model. To avoid the inherent velocity‐depth ambiguity, we assume that the elastic properties of thrust‐sheet with respect to transverse isotropy symmetry axis are homogeneous, the reflector below the thrust‐sheet is flat, and that the anisotropy is weak. In our CFP approach to velocity analysis, for a poorly imaged reflection point, a traveltime residual is obtained as the time difference between the focusing operator for an assumed subsurface velocity model and the corresponding CFP response obtained from the reflection data. We assume that this residual is due to unknown values for anisotropy, and we perform an iterative linear inversion to obtain new model parameters that minimize the residuals. Migration of the data using parameters obtained from our inversion results in a correctly positioned and better focused reflector below the thrust sheet. For traveltime computation we use a brute force mapping scheme that takes into account weakly tilted transverse isotropy media. For inversion, the problem is set up as a generalized Newton's equation where traveltime error (differential time shift) is linearly dependent on the parameter updates. The iterative updates of parameters are obtained by a least‐squares solution of Newton's equations. The significance of this work lies in its applicability to areas where transverse isotropy layers are heterogeneous laterally, and where transverse isotropy layers are overlain by complex structures that preclude a moveout curve fitting.     

Perturbation‐based moveout approximations in anisotropic media

The moveout approximations play an important role in seismic data processing. The standard hyperbolic moveout approximation is based on an elliptical background model with two velocities: vertical and normal moveout. We propose a new set of moveout approximations based on a perturbation series in terms of anellipticity parameters using the alternative elliptical background model defined by vertical and horizontal velocities. We start with a transversely isotropic medium with a vertical symmetry axis. Then, we extend this approach to a homogeneous orthorhombic medium. To define the perturbation coefficients for a new background, we solve the eikonal equation with horizontal velocities in transversely isotropic medium with a vertical symmetry axis and orthorhombic media. To stabilise the perturbation series and improve the accuracy, the Shanks transform is applied for all the cases. We select different parameterisations for both velocities and anellipticity parameters for an orthorhombic model. From the comparison in traveltime error, the new moveout approximations result in better accuracy comparing with the standard perturbation‐based methods and other approximations.     

Post‐stack diffraction imaging in vertical transverse isotropy media using non‐hyperbolic moveout approximations

Diffractions carry valuable information about local discontinuities and small‐scale objects in the subsurface. They are still not commonly used in the process of geological interpretation. Many diffraction imaging techniques have been developed and applied for isotropic media, whereas relatively few techniques have been developed for anisotropic media. Ignoring anisotropy can result in low‐resolution images with wrongly positioned or spurious diffractors. In this article, we suggest taking anisotropy into account in two‐dimensional post‐stack domain by considering P‐wave non‐hyperbolic diffraction traveltime approximations for vertical transverse isotropy media, previously developed for reflection seismology. The accuracy of the final images is directly connected to the accuracy of the diffraction traveltime approximations. We quantified the accuracy of six different approximations, including hyperbolic moveout approximation, by the application of a post‐stack diffraction imaging technique on two‐dimensional synthetic data examples.     

A Fast Sweeping Scheme for Calculating P Wave First-Arrival Travel Times in Transversely Isotropic Media with an Irregular Surface

Seismic wave propagation shows anisotropic characteristics in many sedimentary rocks. Modern seismic exploration in mountainous areas makes it important to calculate P wave travel times in anisotropic media with irregular surfaces. The challenges in this context are mainly from two aspects. First is how to tackle the irregular surface in a Cartesian coordinate system, and the other lies in solving the anisotropic eikonal equation. Since for anisotropic media the ray (group) velocity direction is not the same as the direction of the travel-time gradient, the travel-time gradient no longer serves as an indicator of the group velocity direction in extrapolating the travel-time field. Recently, a topography-dependent eikonal equation formulated in a curvilinear coordinate system has been established, which is effective for calculating first-arrival travel times in an isotropic model with an irregular surface. Here, we extend the above equation from isotropy to transverse isotropy (TI) by formulating a topography-dependent eikonal equation in TI media in the curvilinear coordinate system, and then use a fast sweeping scheme to solve the topography-dependent anisotropic eikonal equation in the curvilinear coordinate system. Numerical experiments demonstrate the feasibility and accuracy of the scheme in calculating P wave travel times in TI models with an irregular surface.     

基于快速推进迎风双线性插值法的三维地震波走时计算

三维地震波走时计算技术是三维地震反演、层析成像、偏移成像等诸多地震数据处理技术中非常重要的正演计算工具.为了获得精度高且兼顾效率的三维走时计算方法:首先,在常规双线性插值公式推导过程中,充分利用平面波双线性假设的结论,获得了二元极小值超越方程的解析解,进而推导出了准确的局部走时计算公式,同时构造性地证明了该计算公式满足地震波的传播规律和Eikonal方程;其次,引入迎风差分的基本思想,提出迎风双线性插值的局部走时计算策略,该计算策略能简化算法、提高效率且保证无条件稳定性;然后,将上述计算公式和迎风双线性插值策略与常规快速推进法中的窄带技术结合,获得了一种新的基于快速推进迎风双线性插值法的三维地震波走时计算方法;最后,通过精度和效率分析检验了新算法的精度、效率和正确性,并通过计算实例验证了算法在面对复杂介质时的稳定性和有效性.     

Anisotropic reverse-time migration for tilted TI media

Seismic anisotropy in dipping shales results in imaging and positioning problems for underlying structures. We develop an anisotropic reverse‐time depth migration approach for P‐wave and SV‐wave seismic data in transversely isotropic (TI) media with a tilted axis of symmetry normal to bedding. Based on an accurate phase velocity formula and dispersion relationships for weak anisotropy, we derive the wave equation for P‐wave and SV‐wave propagation in tilted transversely isotropic (TTI) media. The accuracy of the P‐wave equation and the SV‐wave equation is analyzed and compared with other acoustic wave equations for TTI media. Using this analysis and the pseudo‐spectral method, we apply reverse‐time migration to numerical and physical‐model data. According to the comparison between the isotropic and anisotropic migration results, the anisotropic reverse‐time depth migration offers significant improvements in positioning and reflector continuity over those obtained using isotropic algorithms.     

A multi‐azimuth seismic refraction study for a horizontal transverse isotropic medium: physical modelling results

To investigate the characteristics of the anisotropic stratum, a multi‐azimuth seismic refraction technique is proposed in this study since the travel time anomaly of the refraction wave induced by this anisotropic stratum will be large for a far offset receiver. To simplify the problem, a two‐layer (isotropy–horizontal transverse isotropy) model is considered. A new travel time equation of the refracted P‐wave propagation in this two‐layer model is derived, which is the function of the phase and group velocities of the horizontal transverse isotropic stratum. In addition, the measured refraction wave velocity in the physical model experiment is the group velocity. The isotropic intercept time equation of a refraction wave can be directly used to estimate the thickness of the top (isotropic) layer of the two‐layer model because the contrast between the phase and group velocities of the horizontal transverse isotropic medium is seldom greater than 10% in the Earth. If the contrast between the phase and group velocities of an anisotropic medium is small, the approximated travel time equation of a refraction wave is obtained. This equation is only dependent on the group velocity of the horizontal transverse isotropic stratum. The elastic constants A₁₁, A₁₃, and A₃₃ and the Thomsen anisotropic parameter ε of the horizontal transverse isotropic stratum can be estimated using this multi‐azimuth seismic refraction technique. Furthermore, under a condition of weak anisotropy, the Thomsen anisotropic parameter δ of the horizontal transverse isotropic stratum can be estimated by this technique as well.     

Modelling of viscoacoustic wave propagation in transversely isotropic media using decoupled fractional Laplacians

A new wave equation is derived for modelling viscoacoustic wave propagation in transversely isotropic media under acoustic transverse isotropy approximation. The formulas expressed by fractional Laplacian operators can well model the constant-Q (i.e. frequency-independent quality factor) attenuation, anisotropic attenuation, decoupled amplitude loss and velocity dispersion behaviours. The proposed viscoacoustic anisotropic equation can keep consistent velocity and attenuation anisotropy effects with that of qP-wave in the constant-Q viscoelastic anisotropic theory. For numerical simulations, the staggered-grid pseudo-spectral method is implemented to solve the velocity–stress formulation of wave equation in the time domain. The constant fractional-order Laplacian approximation method is used to cope with spatial variable-order fractional Laplacians for efficient modelling in heterogeneous velocity and Q media. Simulation results for a homogeneous model show the decoupling of velocity dispersion and amplitude loss effects of the constant-Q equation, and illustrate the influence of anisotropic attenuation on seismic wavefields. The modelling example of a layered model illustrates the accuracy of the constant fractional-order Laplacian approximation method. Finally, the Hess vertical transversely isotropic model is used to validate the applicability of the formulation and algorithm for heterogeneous media.     

Traveltime parameters in a tilted elliptical anisotropic medium‡

In this paper, we derive analytical expressions for one‐way and two‐way kinematical parameters in elliptical tilted transverse isotropy media. We show that the homogeneous elliptical tilted transverse isotropy models result in hyperbolic moveout with a reflection point sideslip x₀, which can be considered as an additional traveltime parameter for one‐way wave propagation. For homogeneous elliptical tilted transverse isotropy models we show that the inversion of one‐way traveltime parameters suffers from the ambiguity for large tilts. It is shown that the accuracy of the inversion is sensitive to the error in x₀. We also derive and invert the traveltime parameters for a vertically heterogeneous elliptical tilted transverse isotropy model with a tilt gradually changing with depth. The a priori knowledge of parameter δ is very important for inversion. The wrong choise of this parameter results in significant errors in inverted model parameters.     

三维复杂山地多级次群推进迎风混合法多波型走时计算

三维复杂山地条件下的各种地震波型的走时计算技术,可以直接用于复杂山地区域地震波运动学特性的分析、地震数据采集观测系统的设计以及直接基于三维复杂地表的地震数据处理技术的研发.为了在三维复杂地表条件下准确、灵活且稳定地计算各种地震波型的走时,提出一种多级次群推进迎风混合法.该算法利用不等距迎风差分法简洁稳定地处理三维复杂地表及附近的局部走时计算问题,利用计算精度不错的迎风双线性插值法处理绝大部分均匀正方体网格中的局部走时计算问题,利用群推进法模拟三维复杂地表条件下地震波前的扩展问题,利用多级次算法处理各种类型的地震波的走时计算问题.算法分析和计算实例表明:新方法具有很好的计算精度与效率,且能灵活稳定地处理三维复杂地表复杂介质条件下的多波型走时计算问题.     

CDP mapping in tilted transversely isotropic (TTI) media. Part II: Velocity analysis by combining CDP mapping with a genetic algorithm

This paper presents a method for velocity analysis in tilted transversely isotropic (TTI) media by combining CDP mapping with a genetic algorithm. CDP mapping is a velocity analysis method for determining anisotropic velocity but has difficulties due to the following factors: (i) it involves a non-linear and multimodal objective function; (ii) it is prohibitively expensive in the evaluation of candidate solutions, which often involves the calculation of images in the depth domain; (iii) there is often a very large parameter space. Recognizing the global and multimodal nature of the problem, a genetic algorithm is employed to search for the optimal velocity model. The efficiency of the method contributes to two critical processes: rapid model evaluation, achieved by generating CDP mapping only in the neighbourhood of specific reflectors, and fast computation, based on Fermat's principle, of the CDP points and traveltimes in TTI media. The method produces subsurface structure images in the depth domain, and can also solve for Thomsen's anisotropic parameters (ɛ and δ), the vertical velocity and the dip of the symmetry axis in the model space, simultaneously.