黏性土淹没射流破土实验研究

海底水力喷射开沟技术在海底管道、光缆埋设等工程中得到广泛应用,然而黏土尤其是硬质黏性土中的水力开沟施工较为困难,为阐明其中的破土机制,开展了二维垂向淹没射流开沟物理模拟实验。通过观察射流破土的过程,发现:软黏土与硬质黏性土中冲坑发展的特点有所不同,破土机制也存在差异。射流对硬质黏性土的破坏中,压力导致的剪切破坏起到很大作用,在土力学原理上近似于地基土整体剪切破坏,据此建立了硬质黏性土射流破土模型,同时提出冲坑颈口直径在硬质黏性土冲坑形态中的重要性,并以此取代原有的冲坑直径作为一个预测指标。     

Simulation of a 3D submerged jet flow around a pile

The submerged 3D turbulent jet flow behavior around a pile on a rigid bed and on a scoured bed was studied experimentally and numerically. ADV was used to obtain the jet velocity distributions and Realizable k–ε turbulence model was used for the prediction of flow field around a pile. The jet flow area was three-dimensional and thus numerical model was a three-dimensional model. The numerical results were used to predict the velocity close to the pile and bed shear stress on the bed. In general, the results indicated that the flow field was also in agreement with the findings of previous experiments in literature and the related principles in the subject area. The experimental results demonstrated that Acoustic Doppler Velocimeter (ADV) measurements were almost identical with the Realizable k–ε turbulence model results for turbulence intensity I=10%.     

长江口南沙头通道限流潜堤局部冲刷原因及对策分析

长江口南北港分汊口河段新浏河沙护滩潜堤及南沙头通道潜堤工程是典型的航道整治工程,经调查发现限流潜堤冲刷坑在两侧余排外对称分布,12 m以深等深线呈不连续坑状,南侧个别区段冲刷坑已侵入排内。基于工程地形监测和地质资料分析,通过现场水深测量、旁扫声纳扫测、潜水探摸、水文观测和三维潮流数学模型计算等手段,对限流潜堤排外局部冲刷情况和发生原因进行研究。研究结果表明潜堤排外冲刷是越顶水流长期作用所致,冲刷发展变化具有代表性,冲刷最大深度与地质条件有一定相关性。潜堤南侧护底余排边缘局部余排受外力损毁,引起排内冲刷,如进一步发展会影响堤身及结构安全,需对护底损坏部位进行修复以保证整治建筑物护底功能正常发挥。     

轴线倾斜海底管道冲刷速率试验研究

通过物理模型试验研究水流作用下轴线倾斜海底管道的三维局部冲刷问题。利用超声波探头监测管道下部冲刷沿管轴线方向的扩展过程,分析海底管道三维局部冲刷的动态发展机理。由模型沙的冲蚀试验,建立沙床面剪切应力与泥沙表观侵蚀速率之间的关系式,并引入经验公式对沙床面剪切应力放大系数、泥沙表观侵蚀速率以及远场床面剪切应力之间的关系进行表达。由倾斜管道模型试验,在分析冲刷扩展位置随时间变化数据的基础上,结合上述经验公式以及沙床面剪切应力放大系数与管道埋深的关系,建立轴线倾斜海底管道冲刷扩展速率的预测公式。     

Burial and scour around short cylinder under progressive shoaling waves

The results of a laboratory experimental program aimed at better understanding the scour around and burial of heavy cylindrical objects under oscillating flow on a sandy bed are described. This study was motivated by its application to the dynamics of isolated cobbles/mines on a sandy floor under nonlinear progressive waves, such as that occur in shallow coastal waters beyond the wave-breaking region. In the experiments, nonlinear progressive waves were generated in a long wave tank of rectangular cross-section with a bottom slope. Model mines (short cylinders) were placed on the sandy bottom and the temporal evolution of the bed profile and the velocity field in the near field of the object were observed. Experiments were conducted at relatively high Reynolds numbers for a range of flow conditions, which can be characterized by the Keulegan–Carpenter number and Shields parameter. Depending on the values of these parameters, four different scour regimes around the cylinder including periodical burial of cylinder under migrating sand ripples were observed; they were classified as: (i) no scour/burial, (ii) initial scour, (iii) expanded scour, and (iv) periodic burial cases. A scour regime diagram was developed and the demarcation criteria between different regimes were deduced. Semi-empirical formulae that permit estimation of the scour depth with time, the equilibrium maximum scour depth and length, and conditions necessary for the burial of the cylinder as a function of main external parameters are also proposed.     

Numerical study of sand scour with a modified Eulerian model based on incipient motion theory

Application of the standard Eulerian model to simulations of sand scour results in unrealistic phenomena. Therefore, the present work develops a modified Eulerian model based on sand incipient motion theory. The modified model is applied for simulating a two-dimensional single vertical jet and a moving planar jet. The simulation results generally demonstrate fairly good agreement with published results of scour profiles and the velocity contours of the water and sand phases. In addition, equations to describe self-similar scour profiles for the moving planar jet cases are given. The results demonstrate that the modified model efficiently and accurately simulates the two-dimensional sand scour produced by jets, particularly for the moving jet cases.     

A wave-flume study of scour at a pile breakwater: Solitary waves

Understanding the sediment transport and the resulting scour around coastal structures such as pile breakwaters under local extreme wave conditions is important for the foundation safety of various coastal structures. This study reports a wave-flume experiment investigating the scour induced by solitary waves at a pile breakwater, which consists of a row of closely spaced large piles. A wave blacking gate with a simple operation procedure in the experiment was designed to eliminate possible multiple reflections of the solitary wave inside the flume. An underwater laser scanner and a point probe were used in combination to provide high-resolution data of the bed profile around the pile breakwater. Effects of incident wave height and local water depth on the maximum scour depth, the maximum deposition height and the total scour and deposition volumes were examined. An existing empirical formula describing the evolution of the scour at a single pile in current or waves was extended to describe the scour at the pile breakwater under the action of multiple solitary waves, and new empirical coefficients were obtained by fitting the formula to the new experimental data to estimate the equilibrium scour depth. It appears that the maximum scour depth and the total scour volume are two reliable quantities for validation of numerical models developed for the scour around pile breakwaters under highly nonlinear wave conditions.     

Erosion mechanism of local scour around cushioned caisson on reinforced ground

The scour behavior of cushioned caisson constructed on reinforced ground, which is used to support superstructure constructed in deep water in seismic zones, was investigated by experimental and numerical methods. Flume tests under nine different flow velocities between 18 and 48?cm/s were performed based on hydraulic similarity design. Complementary numerical simulations were also conducted for the flow velocities ranging from 16 to 46?cm/s. Five typical working modes of the foundation under erosion, namely, ideal working, well working, edge failure, shear failure, and total failure, are analyzed together with their potential impacts on seismic-designed foundation. The critical shear stress, local flow structures, and streamlines were used as the key factors to analyze the change of bed materials and the scour characteristics. Fluid–solid interaction model was built by computational fluid dynamics with sediment transport model, and k–ε turbulent model has been implemented to describe the turbulence in the fluid phase typical of scour process. The mechanisms of two possible failure models for the foundation layer elements were identified, based on which recommendations were provided for scour protection to ensure the integrity and performance of seismic-designed foundations. The integrated computational model and model experiments also demonstrate a framework to understand the local scour mechanism for the cushioned caisson on reinforced ground.     

中性网格对圆桩局部冲刷的水动力弱化及防护效果分析

针对水下桩墩的局部冲刷问题,提出一种适用范围广、防冲促淤效果显著的防护措施。该防护措施把一种相对密度略大于水、几何特征特殊的中性网格结构完全覆盖在冲刷坑或可能出现冲刷坑的床面上,以减弱冲刷坑内水动力,促进泥沙落淤,达到减轻局部冲刷的目的。通过数值模拟和水槽试验探讨了中性网格结构对圆桩周围冲刷坑内水动力及床面形态的影响,并研究了网孔尺寸对防冲促淤效果的影响规律。结果表明：该中性网格结构能显著减小局部冲刷坑内的流速,有效抑制局部冲刷,且对桩前来流来沙的影响微弱。孔径比7.7的网格防护结构可以使无黏性沙床上圆桩的局部冲刷深度减少92%,已存在的冲刷坑则可被修复73%。这些研究成果为桩墩局部冲刷防护提供一种新的思路。     

The Structure of A Turbulent Jet in A Crossfiow--Effect of Jet-Crossfiow Velocity

A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. Thejet-to-crossflow velocity ratio (R) varies in the range of 2 ～ 16; both vertical jets and inclined jets without excess streamwisemomentum are considered. The numerical results of the standard two-equation k-~ model show that the turbulent structurecan be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R >4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallelwith the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details andscalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20 ～ 60.The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated,with distinct double concentration maxima; the aspect ratio is found to be around 1.2. A loss in vertical momentum is ob-served and the added mass coefficient of the jet motion is found to be approximately 1. On the other hand, for weak jets instrong crossflow, i.e. R≤ 2, the lee of the jet is characterized by a negative pressure region. Although the double vortexflow can still be noted, the scalar field becomes more symmetrical and no longer bifurcated. The similarity coeffcients are al-so noticeably different. The predicted jet flow characteristics and mixing rates are well supported by experimental and field data     

Mathematical modeling of turbulent jets of deep-water sewage discharge into coastal basins

The basic properties of the dynamic model of a turbulent jet formed by a deep-water sewage discharge into the stratified environment of coastal regions are considered. The model developed was used to estimate the parameters of a floating-up jet of deep wastewater discharge from Sand Island into the basin of Mamala Bay (Hawaii) depending on the season and discharge operation mode. The estimates of the float-up depths of the jet and the initial dilution of the jet were estimated on the basis of model calculations using experimental data on the vertical profiles of the water temperature and salinity under the actual conditions of stratification in the study region. It is shown that the further propagation of the wastewater jet depends on tidal events and internal waves generated by tides. The appearance of turbulent jets at the sea surface was recorded. The model estimates of the parameters of the wastewater discharge were compared with the results of experimental measurements. Good agreement was found, which indicates that the physical mechanisms of the propagation of turbulent jets in a stratified medium are adequately described by the model.     

Scour at the head of a vertical-wall breakwater

This paper presents the results of an experimental investigation on the near-bed flow patterns, the bed shear stress amplification and scour around the head of a vertical-wall breakwater, using regular waves. The Keulegan-Carpenter number (KC), based on the diameter of the breakwater head, is found to be the major parameter that governs the flow and the equilibrium scour depth. Basic flow structures are identified as function of KC. The scour depth is found to increase with increasing the Keulegan-Carpenter number. The necessary extent of the conventional stone protection is studied. An empirical formula is worked out for the width of the protection layer as function of KC. Also, the effects of head shape, the angle of attack and the presence of a co-directional current are investigated. The results indicate that the scour depth is increased considerably in the presence of a current. Likewise, the scour depth is increased when the head shape is changed from a round shape to a sharp-edged one. It is found that the angle of attack is also an influencing factor as regards the scour depth.     

Submersible observations of an iceberg pit and scour on the Grand Banks of Newfoundland

An elongated sea bed depression (pit), 80 by 125 m and 10 m deep located on the Grand Banks of Newfoundland was identified on high resolution surficial geophysical survey lines and investigated using a manned submersible. The pit occurs at the termination of a long (greater than 3 km) iceberg scour, 1.5 m deep, and 80 m wide in 91 m of water. It is similar to other depressions in the region that indent the sea bed up to seven times deeper than the surrounding deepest iceberg furrows. The pit is interpreted to be the sea bed response to impact and loading by a rolling and grounding iceberg. The iceberg scour and pit appear to be of recent origin.     

Prediction of wave-induced scour depth under submarine pipelines using machine learning approach

The scour around submarine pipelines may influence their stability; therefore scour prediction is a very important issue in submarine pipeline design. Several investigations have been conducted to develop a relationship between wave-induced scour depth under pipelines and the governing parameters. However, existing formulas do not always yield accurate results due to the complexity of the scour phenomenon. Recently, machine learning approaches such as Artificial Neural Networks (ANNs) have been used to increase the accuracy of the scour depth prediction. Nevertheless, they are not as transparent and easy to use as conventional formulas. In this study, the wave-induced scour was studied in both clear water and live bed conditions using the M5’ model tree as a novel soft computing method. The M5’ model is more transparent and can provide understandable formulas. To develop the models, several dimensionless parameter, such as gap to diameter ratio, Keulegan-Carpenter number and Shields number were used. The results show that the M5’ models increase the accuracy of the scour prediction and that the Shields number is very important in the clear water condition. Overall, the results illustrate that the developed formulas could serve as a valuable tool for the prediction of wave-induced scour depth under both live bed and clear water conditions.     

黄河水下三角洲沉积物输运及海底冲淤研究

根据黄河水下三角洲的特点,建立了一个垂直平均二维沉积物输运数学模型,结合潮流和沉积物资料,模拟研究了沉积物输运机制和海底冲淤演变过程。模拟结果表明,垂直河口射流的潮流决定了本区沉积物净输运的总体格局,风应力对悬浮泥沙和推移质泥沙运动也起到重要作用。潮流底应力和活动层厚度分布表明,黄河口门和埕岛油田附近海域是潮流底应力和活动层厚度高值区,为沉积物活跃区,海底稳定性弱,易于侵蚀再搬运。冲淤计算表明,埕岛油田附近海域为冲刷中心区;现在河口水下三角洲在断流时为冲刷区,正常行河时则转为淤积区。     

Field calibration of a formula for entrance mixing of river inflows to lakes: Lake Taupo,North Island,New Zealand

Field measurements were used to validate predictions for the initial dilution of negatively buoyant, cold‐water inflows to Lake Taupo, as part of a study to quantify mixing processes associated with the two largest inflows to the lake. The predictions were made using a formulation originally derived for positively buoyant, warm‐water inflows to cooling ponds. The formulation predicts the total dilution of an inflow during its inertia‐dominated phase between its entrance to the lake and the point where buoyancy forces are great enough to cause the inflow to plunge and form a submerged density current. In one of the measured inflows, the inflowing jet was free to entrain from both sides; in the other, entrainment was restricted on one side by attachment of the inflowing jet to the shoreline of a bay just upstream of the plunge point. In the former example, the unmodified coefficients from the cooling pond formulation provided an excellent prediction of initial dilution. In the latter example, entrainment was reduced and different coefficients were derived. In both examples the inflows remained attached to the lake bed throughout their course until their liftoff at depths of 45–55 m to form interflows. The difference between coefficients for the two inflows indicates that the coefficient values should be considered site‐specific. The formulation is not valid for inflows that separate from the bottom of the inflow channel before plunging. The entrance mixing formulation was incorporated in a more general model of lake stratification, DYRESM, which already includes a well‐documented routine for routing underflows down submerged channels on the bed of a lake. Application of the model to the inflows measured in Lake Taupo gave good results for two model outputs that were not involved in the calibration of the entrance mixing formulation, but that are affected by the result of the initial dilution calculation—the temperatures in the river plume after it has plunged, and the insertion depth.     

Characteristics of Parameters for Local Scour Depth around Submarine Pipelines in Waves

The purpose of this study is to investigate the characteristics of parameters for local scour depth around submarine pipes due to waves. Because it is impossible to consider all the factors that influence the scour, it is reasonable to investigate the correlations between parameters and scour. The experimental works about scour were performed for the conditions of 40, 60, 90 m pipe diameter, various wave periods, and wave height in the case of horizontal bed and 1/10 slope bed, respectively. Analyzing the results of experiments, the Reynolds number, Shields parameter, Keulegan-Carpenter number, Ursell number, and Modified Ursell number were estimated. The correlations between the relative scour depth, which is the maximum equilibrium local scour depth divided by the pipe diameter, and 5 parameters were analyzed. It was shown that there was hardly any correlation with the Reynolds number. In the case of a horizontal bed, the Keulegan-Carpent number had the highest correlation, but in the case of the slope bed the correlation was greatly reduced. The modified Ursell number showed a high correlation regardless of the type of bed.     

新沂河海口控制工程闸下河道冲刷试验研究

新沂河海口控制工程深泓闸闸下泓道长约１．３ｋｍ,河床由淤积历时较长的淤泥质粘性土组成。试验中首先取原状土土样,通过水槽试验确定起动流速,据此选择模型沙和进行模型设计。试验表明,下游河道冲刷主要由过闸水流及河口跌水造成,其中,前者形成的冲刷坑为设计的控制条件。根据试验结果认为,对于新沂河海口控制工程这样流量大、河口潮位低的闸下泓道,冲刷是不可避免的,建议放弃海漫防冲的方法,改设板桩截墙。试验中采用的某些观点和方法,对于淤泥质粘土海岸地区河口段闸下冲刷研究具有一定的参考价值。     

Numerical study on the characteristics of flow field and wave propagation near submerged breakwater on slope

In this study,characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical twodimensional model are Reynolds Averaged Navier Stokes equations. The Reynolds stress terms are closed by a nonlinear k ε turbulence transportation model. The free surface is traced through the PILC-VOF method. The proposed numerical model is verified with experimental results. The numerical result shows that the wave profile may become more asymmetrical when wave propa-gates over breakwater. When wave crest propagates over breakwater,the anticlockwise vortex may generate. On the contrary,when wave hollow propagates over breakwater,the clockwise vortex may generate. Meanwhile,the influenced zone of vortex created by wave crest is larger than that created by wave hollow. All the maximum values of the turbulent kinetic energy,turbulent dissi-pation and eddy viscosity occur on the top of breakwater. Both the turbulent dissipation and eddy viscosity increase as the turbulent kinetic energy increases. Wave energy may rapidly decrease near the breakwater because turbulent dissipation increases and energy in lower harmonics is transferred into higher harmonics.     

波、流及其共同作用下桩墩局部冲刷问题试验研究现状

要研究波流共同作用下桩墩的基础冲刷问题,首先需要了解水流和波浪单独作用下桩墩冲刷的机理和特征。针对波、流及其共同作用下桩墩的局部冲刷问题,从流速、水深、桩径、波长、波高、相对底层流速、粒径和粒径级配等方面系统地简述了恒定流、波浪和波流作用下桩、墩局部冲刷的研究进展。根据实验资料比较了各家经典计算公式的计算结果发现我国规范65-1式计算值偏大,65-2式计算值偏小等结论。桩墩局部冲刷是一个复杂的过程,今后可以针对淤泥质海岸底床、粉沙质海岸底床、复杂桩群结构、物理模型比尺效应、非恒定水动力条件、复杂基础形式方面对波流作用下基础冲刷的最大冲刷深度、冲刷过程、冲刷范围进行研究,以弥补桩墩局部冲刷在这些方面的不足。