Titan's 5-micron lightcurve

We report on repeated mid-resolution (R∼2000) spectroscopic observations of Titan, acquired between November 2002 and January 2003 with ISAAC at the ESO/VLT and covering the 4.84-5.05 μm range. These observations, which sample four different positions of Titan around Saturn, clearly indicate a variability of the 5-μm continuum albedo, with Titan's geometric albedo decreasing by ∼40% from Titan's leading side to the trailing side. This Titan 5-μm “lightcurve” appears to be in phase with the other near-infrared lightcurves. This can be understood in terms of a surface model in which water ice coexists in minor and variable proportions (13-25%, if pure) with a second, dark, component.     

Composition of Titan''s surface from Cassini VIMS

Titan's bulk density along with Solar System formation models indicates considerable water as well as silicates as its major constituents. This satellite's dense atmosphere of nitrogen with methane is unique. Deposits or even oceans of organic compounds have been suggested to exist on Titan's solid surface due to UV-induced photochemistry in the atmosphere. Thus, the composition of the surface is a major piece of evidence needed to determine Titan's history. However, studies of the surface are hindered by the thick, absorbing, hazy and in some places cloudy atmosphere. Ground-based telescope investigations of the integral disk of Titan attempted to observe the surface albedo in spectral windows between methane absorptions by calculating and removing the haze effects. Their results were reported to be consistent with water ice on the surface that is contaminated with a small amount of dark material, perhaps organic material like tholin. We analyze here the recent Cassini Mission's visual and infrared mapping spectrometer (VIMS) observations that resolve regions on Titan. VIMS is able to see surface features and shows that there are spectral and therefore likely compositional units. By several methods, spectral albedo estimates within methane absorption windows between 0.75 and 5 μm were obtained for different surface units using VIMS image cubes from the Cassini-Huygens Titan T_a encounter. Of the spots studied, there appears to be two compositional classes present that are associated with the lower albedo and the higher albedo materials, with some variety among the brighter regions. These were compared with spectra of several different candidate materials. Our results show that the spectrum of water ice contaminated with a darker material matches the reflectance of the lower albedo Titan regions if the spectral slope from 2.71 to 2.79 μm in the poorly understood 2.8-μm methane window is ignored. The spectra for brighter regions are not matched by the spectrum of water ice or unoxidized tholin, in pure form or in mixtures with sufficient ice or tholin present to allow the water ice or tholin spectral features to be discerned. We find that the 2.8-μm methane absorption window is complex and seems to consist of two weak subwindows at 2.7 and 2.8 μm that have unknown opacities. A ratio image at these two wavelengths reveals an anomalous region on Titan that has a reflectance unlike any material so far identified, but it is unclear how much the reflectances in these two subwindows pertain to the surface.     

Speckle imaging of Titan at 2 microns: surface albedo, haze optical depth, and tropospheric clouds 1996-1998

We present results from 14 nights of observations of Titan in 1996-1998 using near-infrared (centered at 2.1 microns) speckle imaging at the 10-meter W.M. Keck Telescope. The observations have a spatial resolution of 0.06 arcseconds. We detect bright clouds on three days in October 1998, with a brightness about 0.5% of the brightness of Titan. Using a 16-stream radiative transfer model (DISORT) to model the central equatorial longitude of each image, we construct a suite of surface albedo models parameterized by the optical depth of Titan's hydrocarbon haze layer. From this we conclude that Titan's equatorial surface albedo has plausible values in the range of 0-0.20. Titan's minimum haze optical depth cannot be constrained from this modeling, but an upper limit of 0.3 at this wavelength range is found. More accurate determination of Titan's surface albedo and haze optical depth, especially at higher latitudes, will require a model that fully considers the 3-dimensional nature of Titan's atmosphere.     

Photoelectric Charging of Submicron Aerosols and Macromolecules in the Titan Haze

We quantify the charge states of submicrometer aerosols and aromatic macromolecules in Titan's organic haze. The aerosol charge is balanced between the recombination of positive ions with the aerosol plus the ejection of electrons from the aerosol via the UV-driven photoelectric effect and the recombination of electrons with the aerosol. During the day, the dominant charge state for submicro-meter aerosols is positive. Macromolecules composed of fewer than 32 carbon atoms with low electron affinities (<1.0 eV) are neutral, while the rest are mainly neutral and negatively charged with a small fraction (∼10%) becoming positively charged at higher (≥300 km) altitudes. At night, Titan's aerosol population becomes uniformly neutral and negatively charged. The time taken for a nighttime aerosol to change from being negatively charged to its most probable daytime positive charge is on the order of a few seconds for the largest submicrometer aerosols, while macromolecules tend to persist in an anionic charge state for one to several Earth days. Charging strongly influences aerosol agglomeration via Coulomb attraction and may account for the seasonal variations in the albedo of the Titan haze at midrange (∼200-250 km) altitudes. Enhanced agglomeration may also efficiently produce a source of condensation nuclei for the daily rainout of methane. In addition, the difference in aerosol charge between Titan's day and night (or summer and winter) phases will produce dramatically different chemistries which must be accounted for in future photochemical models. Finally, if there are PAH-like macromolecules in the Titan haze, Cassini Huygens should be able to observe these charge differences, with neutral macromolecules emitting strongly at 3.3 and 11.2 μm, cationic macromolecules emitting between 6.2 and 8.6 μm, and anionic macromolecules emitting in both infrared spectral regions.     

Analysis of a cryolava flow-like feature on Titan

This paper reports on the analysis of the highest spatial resolution hyperspectral images acquired by the Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini spacecraft during its prime mission. A bright area matches a flow-like feature coming out of a caldera-like feature observed in Synthetic Aperture Radar (SAR) data recorded by the Cassini radar experiment [Lopes et al., 2007. Cryovolcanic features on Titan's surface as revealed by the Cassini Titan Radar Mapper. Icarus 186, 395-412, doi:10.1016/j.icarus.2006.09.006]. In this SAR image, the flow extends about 160 km east of the caldera. The contrast in brightness between the flow and the surroundings progressively vanishes, suggesting alteration or evolution of the composition of the cryolava during the lifetime of the eruptions. Dunes seem to cover part of this flow on its eastern end. We analyze the different terrains using the Spectral Mixing Analysis (SMA) approach of the Multiple-Endmember Linear Unmixing Model (MELSUM, Combe et al., 2008). The study area can be fully modeled by using only two types of terrains. Then, the VIMS spectra are compared with laboratory spectra of known materials in the relevant atmospheric windows (from 1 to 2.78 μm). We considered simple molecules that could be produced during cryovolcanic events, including H₂O, CO₂ (using two different grain sizes), CH₄ and NH₃. We find that the mean spectrum of the cryoflow-like feature is not consistent with pure water ice. It can be best fitted by linear combinations of spectra of the candidate materials, showing that its composition is compatible with a mixture of H₂O, CH₄ and CO_2.     

Investigation of energetic proton penetration in Titan's atmosphere using the Cassini INCA instrument

Saturn's largest moon, Titan, provides an interesting opportunity to study how dense atmospheres interact with the surrounding plasma environment. Without an intrinsic magnetic field, this satellite's nitrogen-rich atmosphere is relatively unprotected from plasma interactions. Therefore, the energy-deposition rate is important for understanding chemistry and dynamics in Titan's atmosphere. Since the plasma environment can vary significantly we focus here on the T18 Titan encounter using in-situ data from instruments on board the Cassini spacecraft. These instruments cannot provide in-situ information below the spacecraft closest approach altitude (∼>960 km) so we use the Cassini magnetospheric imaging instrument (MIMI) ion-neutral camera (INCA) to remotely image energetic hydrogen particle fluxes (20-80 keV) at altitudes below Titan closest approach. We also use the MIMI low-energy magnetosphere measurements system (LEMMS) to measure the incident ion fluxes as the spacecraft approaches Titan and combine these data sets with an atmospheric model to first reproduce INCA images. We then use this model to calculate the energy-deposition profiles for the observed incident proton flux. Our model is able to reproduce the INCA observations and give the energy density deposited vs. altitude in Titan's atmosphere; however, we find that the incident fluxes and energy-deposition profiles vary significantly during the encounter.     

Impact of aerosols present in Titan's atmosphere on the CASSINI radar experiment

Simulations of Titan's atmospheric transmission and surface reflectivity have been developed in order to estimate how Titan's atmosphere and surface properties could affect performances of the Cassini radar experiment. In this paper we present a selection of models for Titan's haze, vertical rain distribution, and surface composition implemented in our simulations. We collected dielectric constant values for the Cassini radar wavelength (∼2.2 cm) for materials of interest for Titan: liquid methane, liquid mixture of methane-ethane, water ice, and light hydrocarbon ices. Due to the lack of permittivity values for Titan's haze particles in the microwave range, we performed dielectric constant (ε_r) measurements around 2.2 cm on tholins synthesized in laboratory. We obtained a real part of ε_r in the range of 2-2.5 and a loss tangent between 10⁻³ and 5×10⁻². By combining aerosol distribution models (with hypothetical condensation at low altitudes) to surface models, we find the following results: (1) Aerosol-only atmospheres should cause no loss and are essentially transparent for Cassini radar, as expected by former analysis. (2) However, if clouds are present, some atmospheric models generate significant attenuation that can reach −50 dB, well below the sensitivity threshold of the receiver. In such cases, a 13.78 GHz radar would not be able to measure echoes coming from the surface. We thus warn about possible risks of misinterpretation if a “wet atmosphere” is not taken into account. (3) Rough surface scattering leads to a typical response of ∼−17 dB. These results will have important implications on future Cassini radar data analysis.     

The near-IR spectrum of Titan modeled with an improved methane line list

We have obtained spatially resolved spectra of Titan in the near-infrared J, H and K bands at a resolving power of ∼5000 using the near-infrared integral field spectrometer (NIFS) on the Gemini North 8 m telescope. Using recent data from the Cassini/Huygens mission on the atmospheric composition and surface and aerosol properties, we develop a multiple-scattering radiative transfer model for the Titan atmosphere. The Titan spectrum at these wavelengths is dominated by absorption due to methane with a series of strong absorption band systems separated by window regions where the surface of Titan can be seen. We use a line-by-line approach to derive the methane absorption coefficients. The methane spectrum is only accurately represented in standard line lists down to ∼2.1 μm. However, by making use of recent laboratory data and modeling of the methane spectrum we are able to construct a new line list that can be used down to 1.3 μm. The new line list allows us to generate spectra that are a good match to the observations at all wavelengths longer than 1.3 μm and allow us to model regions, such as the 1.55 μm window that could not be studied usefully with previous line lists such as HITRAN 2008. We point out the importance of the far-wing line shape of strong methane lines in determining the shape of the methane windows. Line shapes with Lorentzian, and sub-Lorentzian regions are needed to match the shape of the windows, but different shape parameters are needed for the 1.55 μm and 2 μm windows. After the methane lines are modeled our observations are sensitive to additional absorptions, and we use the data in the 1.55 μm region to determine a D/H ratio of 1.77 ± 0.20 × 10⁻⁴, and a CO mixing ratio of 50 ± 11 ppmv. In the 2 μm window we detect absorption features that can be identified with the ν₅ + 3ν₆ and 2ν₃ + 2ν₆ bands of CH₃D.     

Heat balance in Titan's atmosphere

The recent measurements of the vertical distribution and optical properties of haze aerosols as well as of the absorption coefficients for methane at long paths and cold temperatures by the Huygens entry probe of Titan permit the computation of the solar heating rate on Titan with greater certainty than heretofore. We use the haze model derived from the Descent Imager/Spectral Radiometer (DISR) instrument on the Huygens probe [Tomasko, M.G., Doose, L., Engel, S., Dafoe, L.E., West, R., Lemmon, M., Karkoschka, E., See, C., 2008a. A model of Titan's aerosols based on measurements made inside the atmosphere. Planet. Space Sci., this issue, doi:10.1016/j.pss.2007.11.019] to evaluate the variation in solar heating rate with altitude and solar zenith angle in Titan's atmosphere. We find the disk-averaged solar energy deposition profile to be in remarkably good agreement with earlier estimates using very different aerosol distributions and optical properties. We also evaluated the radiative cooling rate using measurements of the thermal emission spectrum by the Cassini Composite Infrared Spectrometer (CIRS) around the latitude of the Huygens site. The thermal flux was calculated as a function of altitude using temperature, gas, and haze profiles derived from Huygens and Cassini/CIRS data. We find that the cooling rate profile is in good agreement with the solar heating profile averaged over the planet if the haze structure is assumed the same at all latitudes. We also computed the solar energy deposition profile at the 10°S latitude of the probe-landing site averaged over one Titan day. We find that some 80% of the sunlight that strikes the top of the atmosphere at this latitude is absorbed in all, with 60% of the incident solar energy absorbed below 150 km, 40% below 80 km, and 11% at the surface at the time of the Huygens landing near the beginning of summer in the southern hemisphere. We compare the radiative cooling rate with the solar heating rate near the Huygens landing site averaging over all longitudes. At this location, we find that the solar heating rate exceeds the radiative cooling rate by a maximum of 0.5 K/Titan day near 120 km altitude and decreases strongly above and below this altitude. Since there is no evidence that the temperature structure at this latitude is changing, the general circulation must redistribute this heat to higher latitudes.     

Retrieval and tentative indentification of the 3 μm spectral feature in Titan's haze

Recently, an unidentified 3.3-3.4 μm feature found in the solar occultation spectra of the atmosphere of Titan observed by Cassini/VIMS was tentatively attributed to the C-H stretching mode of aliphatic hydrocarbon chains attached to large organic molecules, but without properly extracting the feature from adjacent influences of strong CH₄ and weak C₂H₆ absorptions (Bellucci et al., 2009). In this work, we retrieve the detailed spectral feature using a radiative transfer program including absorption and fluorescent emission of both molecules, as well as absorption and scattering by haze particles. The spectral features of the haze retrieved from the VIMS data at various altitudes are similar to each other, indicating relatively uniform spectral properties of the haze with altitude. However, slight deviations observed near 127 km and above 300 km suggest inhomogeneity at these altitudes. We find that the positions of the major spectral peaks occur at 3.33-3.37 μm, which are somewhat different from the typical 3.3 μm aromatic or 3.4 μm aliphatic C-H stretches usually seen in the spectra of dust particles of the interstellar medium and comets. The peaks, however, coincide with those of the solid state spectra of C₂H₆, CH₄, and CH₃CN; and a broad shoulder from 3.37 to 3.50 μm coincides with those of C₅H₁₂ and C₆H₁₂ as well as those of typical aliphatic C-H stretches. This result combined with high-altitude (∼1000 km) haze formation process recently reported by Waite et al. (2007) opens a new question on the chemical composition of the haze particles. We discuss the possibility that the 3 μm feature may be due to the solid state absorption bands of these molecules (or some other molecules) and we advocate additional laboratory measurements for the ices of hydrocarbon and nitrogen-bearing molecules present in Titan's atmosphere for the identification of this 3 μm feature.     

A large cloud outburst at Titan's south pole

Images of Titan acquired over five nights in October 2004 using the adaptive optics system at the Keck Observatory show dramatic increases in tropospheric cloud activity at the south pole compared with all other images of Titan clouds to date. During this time, Titan's south polar clouds brightened to more than 18 times their typical values. The Cassini Ta flyby of Titan occurred as this storm was rapidly dissipating. We find that the brightness of this cloud outburst is consistent with the dramatic transient brightening of Titan observed in atmospheric windows on two nights in 1995 by Griffith et al. [Griffith, C.A., Owen, T., Miller, G.A., Geballe, T., 1998. Nature 395 (6702) 575-578] if we scale the brightness of the cloud by projecting it onto the equator. While apparently infrequent, the fact that large cloud events have been observed in different seasons of Titan's year indicates that these large storms might be a year-round phenomenon on Titan. We propose possible mechanisms to explain these occasional short-term increases in Titan's cloud activity.     

Saturn's magnetospheric interaction with Titan as defined by Cassini encounters T9 and T18: New results

We present new results of Cassini's T9 flyby with complementary observations from T18. Based on Cassini plasma spectrometer (CAPS) and Cassini magnetometer (MAG), compositional evidence shows the upstream flow for both T9 and T18 appears composed of light ions (H⁺ and H₂⁺), with external pressures ∼30 times lower than that for the earlier TA flyby where heavy ions dominated the magnetospheric plasma. When describing the plasma heating and sputtering of Titan's atmosphere, T9 and T18 can be considered interactions of low magnetospheric energy input. On the other hand, T5, when heavy ion fluxes are observed to be higher than typical (i.e., TA), represents the limiting case of high magnetospheric energy input to Titan's upper atmosphere. Anisotropy estimates of the upstream flow are 1<T_⊥/T_‖<3 and the flow is perpendicular to B, indicative of local picked up ions from Titan's H and H₂ coronae extending to Titan's Hill sphere radius. Beyond this distance the corona forms a neutral torus that surrounds Saturn. The T9 flyby unexpectedly resulted in observation of two “wake” crossings referred to as Events 1 and 2. Event 2 was evidently caused by draped magnetosphere field lines, which are scavenging pickup ions from Titan's induced magnetopause boundary with outward flux ∼2×10⁶ ions/cm²/s. The composition of this out flow is dominated by H₂⁺ and H⁺ ions. Ionospheric flow away from Titan with ion flux ∼7×10⁶ ion/cm²/s is observed for Event 1. In between Events 1 and 2 are high energy field aligned flows of magnetosphere protons that may have been accelerated by the convective electric field across Titan's topside ionosphere. T18 observations are much closer to Titan than T9, allowing one to probe this type of interaction down to altitudes ∼950 km. Comparisons with previously reported hybrid simulations are made.     

Photometric properties of Titan''s surface from Cassini VIMS: Relevance to titan''s hemispherical albedo dichotomy and surface stability

The Visual and Infrared Mapping Spectrometer (VIMS) instrument on the Cassini Saturn Orbiter returned spectral imaging data as the spacecraft undertook six close encounters with Titan beginning 7 July, 2004. Three of these flybys each produced overlapping coverage of two distinct regions of Titan's surface. Twenty-four points were selected on approximately opposite hemispheres to serve as photometric controls. Six points were selected in each of four reflectance classes. On one hemisphere each control point was observed at three distinct phase angles. From the derived phase coefficients, preliminary normal reflectances were derived for each reflectance class. The normal reflectance of Titan's surface units at 2.0178 μm ranged from 0.079 to 0.185 for the most absorbing to the most reflective units assuming no contribution from absorbing haze. When a modest haze contribution of τ=0.1 is considered these numbers increase to 0.089–0.215. We find that the lowest three reflectance classes have comparable normal reflectance on either hemisphere. However, for the highest brightness class the normal reflectance is higher on the hemisphere encompassing longitude 14–65° compared to the same high brightness class for the hemisphere encompassing 122–156° longitude. We conclude that an albedo dichotomy observed in continental sized units on Titan is due not only to one unit having more areal coverage of reflective material than the other but the material on the brighter unit is intrinsically more reflective than the most reflective material on the other unit. This suggests that surface renewal processes are more widespread on Titan's more reflective units than on its less reflective units.

We note that one of our photometric control points has increased in reflectance by 12% relative to the surrounding terrain from July of 2004 to April and May of 2005. Possible causes of this effect include atmospheric processes such as ground fog or orographic clouds; the suggestion of active volcanism cannot be ruled out.

Several interesting circular features which resembled impact craters were identified on Titan's surface at the time of the initial Titan flyby in July of 2004. We traced photometric profiles through two of these candidate craters and attempted to fit these profiles to the photometric properties expected from model depressions. We find that the best-fit attempt to model these features as craters requires that they be unrealistically deep, approximately 70 km deep. We conclude that despite their appearance, these circular features are not craters, however, the possibility that they are palimpsests cannot be ruled out.

We used two methods to test for the presence of vast expanses of liquids on Titan's surface that had been suggested to resemble oceans. Specular reflection of sunlight would be indicative of widespread liquids on the surface; we found no evidence of this. A large liquid body should also show uniformity in photometric profile; we found the profiles to be highly variable. The lack of specular reflection and the high photometric variability in the profiles across candidate oceans is inconsistent with the presence of vast expanses of flat-lying liquids on Titan's surface. While liquid accumulation may be present as small, sub-pixel-sized bodies, or in areas of the surface which still remain to be observed by VIMS, the presence of large ocean-sized accumulations of liquids can be ruled out.

The Cassini orbital tour offers the opportunity for VIMS to image the same parts of Titan's surface repeatedly at many different illumination and observation geometries. This creates the possibility of understanding the properties of Titan's atmosphere and haze by iteratively adapting models to create a best fit to the surface reflectance properties.     

Titan's surface from the Cassini RADAR radiometry data during SAR mode

We present initial results on the calibration and interpretation of the high-resolution radiometry data acquired during the Synthetic Aperture Radar (SAR) mode (SAR-radiometry) of the Cassini Radar Mapper during its first five flybys of Saturn's moon Titan.We construct maps of the brightness temperature at the 2-cm wavelength coincident with SAR swath imaging. A preliminary radiometry calibration shows that brightness temperature in these maps varies from 64 to 89 K. Surface features and physical properties derived from the SAR-radiometry maps and SAR imaging are strongly correlated; in general, we find that surface features with high radar reflectivity are associated with radiometrically cold regions, while surface features with low radar reflectivity correlate with radiometrically warm regions. We examined scatterplots of the normalized radar cross-section σ⁰ versus brightness temperature, outlining signatures that characterize various terrains and surface features. The results indicate that volume scattering is important in many areas of Titan's surface, particularly Xanadu, while other areas exhibit complex brightness temperature variations consistent with variable slopes or surface material and compositional properties.     

Coupling photochemistry with haze formation in Titan's atmosphere, Part II: Results and validation with Cassini/Huygens data

The new one-dimensional radiative-convective/photochemical/microphysical model described in Part I is applied to the study of Titan's atmospheric processes that lead to haze formation. Our model generates the haze structure from the gaseous species photochemistry. Model results are presented for the species vertical concentration profiles, haze formation and its radiative properties, vertical temperature/density profiles and geometric albedo. These are validated against Cassini/Huygens observations and other ground-based and space-borne measurements. The model reproduces well most of the latest measurements from the Cassini/Huygens instruments for the chemical composition of Titan's atmosphere and the vertical profiles of the observed species. For the haze production we have included pathways that are based on pure hydrocarbons, pure nitriles and hydrocarbon/nitrile copolymers. From these, the nitrile and copolymer pathways provide the stronger contribution, in agreement with the results from the ACP instrument, which support the incorporation of nitrogen in the pyrolized haze structures. Our haze model reveals a new second major peak in the vertical profile of haze production rate between 500 and 900 km. This peak is produced by the copolymer family used and has important ramifications for the vertical atmospheric temperature profile and geometric albedo. In particular, the existence of this second peak determines the vertical profile of haze extinction. Our model results have been compared with the DISR retrieved haze extinction profiles and are found to be in very good agreement. We have also incorporated in our model heterogeneous chemistry on the haze particles that converts atomic hydrogen to molecular hydrogen. The resultant H₂ profile is closer to the INMS measurements, while the vertical profile of the diacetylene formed is found to be closer to that of the CIRS profile when this heterogenous chemistry is included.     

The detached haze layer in Titan's mesosphere

By comparing observations from the Cassini imaging system, UV spectrometer, and Huygens atmospheric structure instrument, we determine an apparent radius of ∼40 nm, an imaginary index <0.3 at 187.5 nm and a number density of ∼30 particles cm⁻³ for the detached haze layer at 520 km in Titan's mesosphere. We point out that the detached haze layer is coincident with a local maximum in the measured temperature profile and show that the temperature maximum is caused by absorption of sunlight in the detached haze layer. This rules out condensation as the source of the layer. The derived particle size is in good agreement with that estimated for the size of the monomers in the aggregate particles that make up the main haze layer. Calculations of the sedimentation velocity of the haze particles coupled with the derived number density imply a mass flux , which is approximately equal to the mass flux required to explain the main haze layer. Because the aerosol size and mass flux derived for the detached layer agree with those determined for the main layer, we suggest that the main haze layer in Titan's stratosphere is formed primarily by sedimentation and coagulation of particles in the detached layer. This implies that high-energy radical and ion chemistry in the thermosphere is the main source of haze on Titan.     

A new analysis of the ESO Very Large Telescope (VLT) observations of Titan at 2 μm

We have performed an analysis of ESO Very Large Telescope (VLT) observations of Titan at 2 μm. The data were acquired with the Nasmyth Adaptative Optics System Near-Infrared Imager and Spectrograph (NAOS/CONICA), on the 16th of January 2005, that is 2 days after the landing of the Huygens probe (Hirtzig et al., 2007). The data consist in 21 spectra taken along two diameters of Titan’s disk at wavelengths between 2.03 and 2.5 μm. This range covers a part of the 2 μm methane window and the adjacent band. The data received a preliminary analysis in a recent paper (Negrão et al., 2007), essentially focused on the surface albedo near Huygens landing site. In this work, we perform an in-depth analysis to retrieve information about several aspects: the latitude haze distribution in the stratosphere and in the low atmosphere, the latitudinal variation of the surface albedo and its spectral behaviour. Also, this analysis allowed us to make sensitivity tests on the influence of the scatterer profiles on the retrieved surface albedo and its spectral slope. The news analysis confirms that, as was the case with VIMS observations at the same epoch, the Northern (currently winter) Hemisphere contains more haze than the southern one (Summer Hemisphere). The sensitivity tests show that the scatterer profiles have just a little impact on the surface albedo and its spectral slope. The analysis seems to confirm the presence of H₂O and CH₄ ices.     

Simulations of Titan's brightness by a two-dimensional haze model

We have used a 2-D microphysics model to study the effects of atmospheric motions on the albedo of Titan's thick haze layer. We compare our results to the observed variations of Titan's brightness with season and latitude. We use two wind fields; the first is a simple pole-to-pole Hadley cell that reverses twice a year. The second is based on the results of a preliminary Titan GCM. Seasonally varying wind fields, with horizontal velocities of about 1 cm sec-1 at optical depth unity, are capable of producing the observed change in geometric albedo of about 10% over the Titan year. Neither of the two wind fields can adequately reproduce the latitudinal distribution of reflectivity seen by Voyager. At visible wavelengths, where only haze opacity is important, upwelling produces darkening by increasing the particle size at optical depth unity. This is due to the suspension of larger particles as well as the lateral removal of smaller particles from the top of the atmosphere. At UV wavelengths and at 0.89 micrometers the albedo is determined by the competing effects of the gas the haze material. Gas is bright in the UV and dark at 0.89 micrometers. Haze transport at high altitudes controls the UV albedo and transport at low altitude controls the 0.89 micrometers albedo. Comparisons between the hemispheric contrast at UV, visible, and IR wavelengths can be diagnostic of the vertical structure of the wind field on Titan.     

Cassini/VIMS hyperspectral observations of the HUYGENS landing site on Titan

Titan is one of the primary scientific objectives of the NASA–ESA–ASI Cassini–Huygens mission. Scattering by haze particles in Titan's atmosphere and numerous methane absorptions dramatically veil Titan's surface in the visible range, though it can be studied more easily in some narrow infrared windows. The Visual and Infrared Mapping Spectrometer (VIMS) instrument onboard the Cassini spacecraft successfully imaged its surface in the atmospheric windows, taking hyperspectral images in the range 0.4–5.2 μm. On 26 October (TA flyby) and 13 December 2004 (TB flyby), the Cassini–Huygens mission flew over Titan at an altitude lower than 1200 km at closest approach. We report here on the analysis of VIMS images of the Huygens landing site acquired at TA and TB, with a spatial resolution ranging from 16 to14.4 km/pixel. The pure atmospheric backscattering component is corrected by using both an empirical method and a first-order theoretical model. Both approaches provide consistent results. After the removal of scattering, ratio images reveal subtle surface heterogeneities. A particularly contrasted structure appears in ratio images involving the 1.59 and 2.03 μm images north of the Huygens landing site. Although pure water ice cannot be the only component exposed at Titan's surface, this area is consistent with a local enrichment in exposed water ice and seems to be consistent with DISR/Huygens images and spectra interpretations. The images show also a morphological structure that can be interpreted as a 150 km diameter impact crater with a central peak.     

Titan under a red dwarf star and as a rogue planet: requirements for liquid methane

Titan has a surface temperature of 94 K and a surface pressure of 1.4 atmospheres. These conditions make it possible for liquid methane solutions to be present on the surface. Here, we consider how Titan could have liquid methane while orbiting around an M4 red dwarf star, and a special case of Titan orbiting the red dwarf star Gliese 581. Because light from a red dwarf star has a higher fraction of infrared than the Sun, more of the starlight will reach the surface of Titan because its atmospheric haze is more transparent to infrared wavelengths. If Titan was placed at a distance from a red dwarf star such that it received the same average flux as it receives from the Sun, we calculate the increased infrared fraction, which will warm surface temperatures by an additional ∼10 K. Compared to the Sun, red dwarf stars have less blackbody ultraviolet light but can have more Lyman α and particle radiation associated with flares. Thus depending on the details, the haze production may be much higher or much lower than for the current Titan. With the haze reduced by a factor of 100, Titan would have a surface temperature of 94 K at a distance of 0.23 AU from an M4 star and at a distance of 1.66 AU, for Gliese 581. If the haze is increased by a factor of 100 the distances become 0.08 and 0.6 AU for the M4-star and Gliese 581, respectively. As a rogue planet, with no incident stellar flux, Titan would need 1.6 W/m² of geothermal heat to maintain its current surface temperature, or an atmospheric opacity of 20× its present amount with 0.1 W/m² of geothermal heat. Thus Titan-like worlds beyond our solar system may provide environment supporting surface liquid methane.