Differentiating the effect of episodic tectonism and eustatic sea-level fluctuations in foreland basins filled by alluvial fans and axial deltaic systems: insights from a three-dimensional stratigraphic forward model

Many studies of foreland basins have recognized a hierarchical organization in the stacking of sequences deposited by axial‐deltaic and alluvial fan systems. The hierarchy is often explained in terms of the competing control of eustasy and pulsed tectonic subsidence and the different frequencies at which these processes operate. Unravelling the relative contributions of tectonic and eustatic controls on the sequence stacking pattern is a fundamental question in foreland basin analysis, yet this is difficult because of the lack of independent stratigraphic evidence. In this study, a three‐dimensional numerical model is presented, which aids in the interpretation of alluvial successions in foreland basins filled by transverse and axial depositional systems, under conditions of variable tectonism and eustatic sea‐level change. The tectono‐sedimentary model is capable of simulating the hierarchical stratigraphic response to both eustatic and tectonic forcing, and is of higher resolution than previous models of foreland basin filling. Numerical results indicate that the onset of tectonic activity is reflected by rapid retrogradation of both depositional systems and by widespread flooding and onlap of carbonate sediments. Syntectonic fluvial patterns on the axial‐deltaic plain are dominated by bifurcating channels, swiftly relocating in response to the general rise in relative sea level induced by flexural subsidence. The resulting surface morphology of the axial delta is convex upwards. Syntectonic eustatic sea‐level fluctuations result in parasequence‐scale packages of retrograding and prograding fan and delta sediments bounded by minor flooding surfaces and type 2 sequence boundaries. Incised channels are rare within the syntectonic parasequences and are formed only during phases of tectonic quiescence when eustatic falls are no longer compensated by the subsidence component in the rise in relative sea level. Suites of amalgamating, axial channels corresponding to multiple eustatic falls delineate the resulting type 1 unconformities. Coarse‐grained, incised‐channel fills are found in the zone between the alluvial fan fringes and the convex‐upward body of the axial delta, as the axial streams tend to migrate towards this zone of maximum accommodation.     

Facies development,depositional settings and sequence stratigraphy across the Ordovician–Silurian boundary: a new perspective from the Barrandian area of the Czech Republic

The Hirnantian and Llandovery sedimentary succession of the Barrandian area has been assigned to middle and outer clastic‐shelf depositional settings, respectively. Deposition was influenced by the remote Gondwanan glaciation and subsequent, long‐persisting, post‐glacial anoxia triggered by a current‐driven upwelling system. High‐resolution graptolite stratigraphy, based upon 19 formally defined biozones—largely interval zones—and five subzones, enabled a detailed correlation between 42 surface sections and boreholes, and enabled linking of the sedimentary record, graptoloid fauna dynamics, organic‐content fluctuations and spectral gamma‐ray curves. The Hirnantian and Llandovery succession has been subdivided into four biostratigraphically dated third‐order sequences (units 1–4). Time–spatial facies distribution recorded early and late Hirnantian glacio‐eustatic sea‐level lowstands separated by a remarkable mid‐Hirnantian rise in sea‐level. A major part of the post‐glacial sea‐level rise took place within the late Hirnantian. The highstand of Unit 2 is apparently at the base of the Silurian succession. Short‐term relative sea‐level drawdown and a third‐order sequence boundary followed in the early Rhuddanian upper acuminatus Zone. Early Aeronian and late Telychian sea‐level highstands and late Aeronian drawdown of likely eustatic origin belong to units 3 and 4. Sea‐level rise culminated in the late Telychian, which may also be considered as a highstand episode of a second‐order Hirnantian–early Silurian cycle. Facies and sequence‐stratigraphic analysis supports recent interpretations on nappe structures in the core part of the Ordovician–Middle Devonian Prague Synform of the Barrandian. Copyright © 2006 John Wiley & Sons, Ltd.     

On the Carboniferous Sequence Stratigraphy in the Tazhong Area, Xinjiang——A Model of the Sequence Stratigraphy Framework of Intracratonic Depressional Basins

The Carboniferous prototype sedimentary basin in the Tazhong (Central Tarimbasin) area is recognized as a compressive intracratonic depressional one. Three type Ⅰ sequenceboundaries and three type Ⅱ sequence boundaries can be identified in the CarboniferousSystem, which can accordingly be divided into five sedimentary sequences. These sequencespossess stratigraphic characters of the standard sequence and correspond to the depositionalstratigraphic unit of a third-order eustatic cycle. They can be regionally or globally correlatedwith each other. The framework of sequence stratigraphy of the intracratonict basin in thestudy area distinctly differs from that of the passive continental-margin basin in the lack ofdepositional systems of early-middle lowstand, poor development of the deeply incised valleyand condensed section of the maximum sea-flood, good development of type Ⅱ sequenceboundaries and coastal plain depositional systems coexisting with shelf-type fan deltas underwet climatic conditions, Which consequently led to the formation of a paralic lithofacies frame-work.     

Evaluation of the relative roles of global versus local sedimentary controls on Middle to Late Pleistocene formation of continental margin strata,Canterbury Basin,New Zealand

Determining the relative influence of eustasy versus local sedimentary processes on strata formation is a fundamental challenge in the study of continental margin stratigraphy. In this paper, the relative contribution of these factors on continental margin evolution during the Middle to Late Pleistocene is evaluated using samples from Integrated Ocean Drilling Program Expedition 317. Core‐logging, biostratigraphy and quantitative X‐ray diffraction mineralogy are used to delineate continental shelf sedimentary systems. Major lithological unconformities bound stratigraphic sequences that contain recurring compositional patterns and that resemble other examples of Middle to Upper Pleistocene sequences. However, a preliminary chronology suggests that sequence boundary formation cannot be linked ‘one to one’ with eustatic cycles and therefore these sequences can contain multiple ca 100 ka eustatic cycles. Smaller amplitude, higher frequency transitions in sediment composition are interpreted as stratigraphic sequences driven by more rapid perturbations in the interplay of accommodation and sediment supply; their stratigraphy is variable in time and across the shelf, suggesting a strong influence of local sedimentary forcing in their formation. Changes in sediment composition after the Middle Pleistocene Transition indicate that sediment transfer from onshore sources in the glaciated Southern Alps to the middle‐shelf occurred over a single 100 ka glacio‐eustatic cycle, with an additional 100 ka lag before the mineralogical signal was preserved on the outer‐shelf. This phenomenon is coincident with rapid shelf progradation in this basin, suggesting a causal relation between across‐shelf sediment transport and margin progradation. This is one of very few studies that provide insights at the core scale into the processes driving continental margin evolution during the Middle to Late Pleistocene. This work shows that compositional changes in mud‐dominated successions can lead to a sequence stratigraphic interpretation and the identification of high‐frequency sequences, which may not be possible using a conventional stratigraphic approach.     

南海北部湾盆地北部凹陷涠洲组层序地层格架及特征

通过地震、测井和岩心等资料及重矿物变化规律的综合分析,识别出沉积基准面旋回产生的层序界面,在北部湾盆地北部凹陷涠洲组划分出 3个超层序 9个三级层序,并研究了各层序发育的特征及沉积体系构成。盆地充填超层序的发育受控于中长周期基准面变化,层序地层单元在中长周期基准面旋回中所处位置不同,其地层厚度、沉积体系的类型和分布均有显著的不同。通过分析对比确认主要控油层序为超层序 1的层序 2和 3,主要储层赋存于低水位和水进体系域。以基准面旋回为基础,论述了层序与油气储盖组合的关系。     

Sequence stratigraphy in the context of rapid regional uplift and high‐amplitude glacio‐eustatic changes: the Pleistocene Cutro Terrace (Calabria,southern Italy)

The Cutro Terrace is a mixed marine to continental terrace, where deposits up to 15 m thick discontinuously crop out in an area extending for ca 360 km² near Crotone (southern Italy). The terrace represents the oldest and highest terrace of the Crotone area, and it has been ascribed to marine isotope stage 7 (ca 200 kyr bp ). Detailed facies and sequence‐stratigraphic analyses of the terrace deposits allow the recognition of a suite of depositional environments ranging from middle shelf to fluvial, and of two stacked transgressive–regressive cycles (Cutro 1 and Cutro 2) bounded by ravinement surfaces and by surfaces of sub‐aerial exposure. In particular, carbonate sedimentation, consisting of algal build‐ups and biocalcarenites, characterizes the Cutro 1 cycle in the southern sector of the terrace, and passes into shoreface and foreshore sandstones and calcarenites towards the north‐west. The Cutro 2 cycle is mostly siliciclastic and consists of shoreface, lagoon‐estuarine, fluvial channel fill, floodplain and lacustrine deposits. The Cutro 1 cycle is characterized by very thin transgressive marine strata, represented by lags and shell beds upon a ravinement surface, and thicker regressive deposits. Moreover, the cycle appears foreshortened basinwards, which suggests that the accumulation of its distal and upper part occurred during forced regressive conditions. The Cutro 2 cycle displays a marked aggradational component of transgressive to highstand paralic and continental deposits, in places strongly influenced by local physiography, whereas forced regressive sediments are absent and probably accumulated further basinwards. The maximum flooding shoreline of the second cycle is translated ca 15 km basinward with respect to that of the first cycle, and this reflects a long‐term regressive trend mostly driven by regional uplift. The stratigraphic architecture of the Cutro Terrace deposits is the result of the interplay between regional uplift and high amplitude, Late Quaternary glacio‐eustatic changes. In particular, rapid transgressions, linked to glacio‐eustatic rises that outpaced regional uplift, favoured the accumulation of thin transgressive marine strata at the base of the two cycles. In contrast, the combined effect of glacio‐eustatic falls and regional uplift led to high‐magnitude forced regressions. The superposition of the two cycles was favoured by a relatively flat topography, which allowed relatively complete preservation of stratal geometries that record large shoreline displacements during transgression and regression. The absence of a palaeo‐coastal cliff at the inner margin of the terrace supports this interpretation. The Cutro Terrace provides a case study of sequence architecture developed in uplifting settings and controlled by high‐amplitude glacio‐eustatic changes. This case study also demonstrates how the interplay of relative sea‐level change, sediment supply and physiography may determine either the superposition of cycles forming a single terrace or the formation of a staircase of terraces each recording an individual eustatic pulse.     

Controls on late Quaternary incised‐valley dimension along passive margins evaluated using empirical data

Incised valleys are canyon‐like features that initially form near the highstand shoreline and evolve over geological time as rivers erode into coastal plains and continental shelves to maintain equilibrium‐gradient profiles in response to sea‐level fall. Most of these valleys flood during sea‐level rise to form estuaries. Incised‐valley morphology strongly controls the rate of creation of sediment accommodation, valley‐fill facies architecture and the preservation potential of coastal lithosomes on continental shelves, and affects coastal physical processes. Nonetheless, little is known about what dictates incised‐valley size and shape and whether these metrics can be used to explain principal formation processes. The main control on alluvial channel morphology over human time scales is discharge; this is based on numerous empirical studies and is well‐constrained because all variables are easily measured at this short time scale. Knowledge of long‐term river evolution over a complete glacio‐eustatic cycle, on the contrary, remains largely conceptual, experimental and based on individual systems because variables that are thought to drive morphological change are not easily quantified. In spite of this difficulty, existing models of incised‐valley formation at the coast suggest that valley evolution is driven largely by downstream forcing mechanisms, highlighting sea‐level and shelf gradient/morphology as the dominant controls on valley incision. Although valleys are cut by rivers, whose channels are a direct reflection of discharge, little empirical data exist in coastal areas to address the degree to which valley evolution is governed by upstream controls. The late Quaternary is the best time period to examine because it provides the most complete sedimentary record and many variables, including sea‐level, tectonics, substrate lithology and drainage network characteristics, are accurately constrained. Here, 38 late Quaternary valleys along the coast of two different passive continental margins are compared, which suggests that valley shape and size are governed primarily by upstream, intrinsic controls such as discharge. Valley width, depth and cross‐sectional area are found to be predictable at the highstand shoreline and are scaled with the size of their drainage basin, which has important implications for estimating sediment discharge to continental shelves and deep water environments during periods of low sea‐level.     

Seismic‐stratigraphic record of a deglaciation sequence: from the marine Laflamme Gulf to Lake Saint‐Jean (late Quaternary,Québec,Canada)

The stratigraphy of the last deglaciation sequence is investigated in Lake Saint‐Jean (Québec Province, Canada) based on 300 km of echo‐sounder two dimensional seismic profiles. The sedimentary archive of this basin is documented from the Late Pleistocene Laurentidian ice‐front recession to the present‐day situation. Ten seismic units have been identified that reflect spatio‐temporal variations in depositional processes characterizing different periods of the Saint‐Jean basin evolution. During the postglacial marine flooding, a high deposition rate of mud settling, from proglacial glacimarine and then prodeltaic plumes in the Laflamme Gulf, produced an extensive, up to 50 m thick mud sheet draping the isostatically depressed marine basin floor. Subsequently, a closing of the water body due to glacio‐isostatic rebound occurred at 8.5 cal. ka BP, drastically modifying the hydrodynamics. Hyperpycnal flows appeared because fresh lake water replaced dense marine water. River sediments were transferred towards the deeper part of the lake into river‐related sediment drifts and confined lobes. The closing of the water body is also marked by the onset of a wind‐driven internal circulation associating coastal hydrodynamics and bottom currents with sedimentary features including shoreface deposits, sediment drifts and a prograding shelf‐type body. The fingerprints of a forced regression are well expressed by mouth‐bar systems and by the shoreface–shelf system, the latter unexpected in such a lacustrine setting. In both cases, a regressive surface of lacustrine erosion (RSLE) has been identified, separating sandy mouth‐bar from glaciomarine to prodeltaic muds, and sandy shoreface wedges from the heterolithic shelf‐type body, respectively. The Lake Saint‐Jean record is an example of a regressive succession driven by a glacio‐isostatic rebound and showing the transition from late‐glacial to post‐glacial depositional systems.     

The Pleistocene Cape Kidnappers section in New Zealand: orbitally forced controls on active margin sedimentation?

High sedimentation rates in Pleistocene active margin basins can provide a very detailed record of tectonic and climatic controls on sediment preservation. A 500 m thick, Pleistocene rock section exposed in northeastern North Island of New Zealand (Kidnappers Group), provides the opportunity to discuss these controls. The section is composed of conglomerate, sandstones, siltstones and minor shales, interbedded with tephra layers. The sediments were deposited in alluvial to shallow marine environments and preserved in stacks of depositional units decimetres to hundreds of metres thick as a result of base‐level changes through time. The correlation of base‐level changes in the section with the deep sea oxygen isotope stratigraphy shows that the sequences at 10 m and 80 m scales can correlate, respectively, to the 20 and 100 kyr changes in eustatic sea‐level, but that the 80‐m‐thick sequences correlate also to changes in tectonic uplift rates. A major change in the stratigraphical architecture occurs at the Mid‐Pleistocene Transition (MPT) when the 40 kyr ice volume variations shifted to a dominant 100 kyr variation. This change includes an increase in the amplitude of the shifts in depositional environments and an overall simplification of the stacking pattern of the depositional units through the MPT. This study illustrates that active margin basins can record orbitally forced sedimentary cycles and points to a possible leading influence of eustasy on the pattern of sediment preservation in tectonically active areas. Copyright © 2004 John Wiley & Sons, Ltd.     

潮水盆地侏罗系层序地层与聚煤规律研究

运用层序地层学和沉积体系分析相结合的方法,对潮水盆地侏罗系进行综合沉积学研究,识别出各级层序界面特征,将侏罗系划分为２个构造层序、３个一级层序、４个二级层序、８个三级层序;发现各级层序地层单元对富煤带的控制因素是古气候条件、构造运动和与之密切相关的沉积环境,但对不同级别的层序地层单元控制因素具有主次之分。沉积体系分析结果表明,潮水盆地侏罗系的富煤单元主要发育于冲积扇沉积体系和扇三角洲沉积体系。     

Sequence stratigraphy and Quaternary depositional systems in the Sanhu area of the Qaidam Basin,northwest China

The Qaidam Basin is a Mesozoic–Cenozoic compresso-shearing basin in western China. This basin has been subsiding since the Indosinian orogeny, and the subsidence is a strongly inherited feature in its Quaternary development. Five third-order sequences (SQ1, SQ2, SQ3, SQ4 and SQ5) were recognised using drilling/logging, coring and seismic data analysis. Each sequence was further divided into transgressive systems tract and regressive systems tract based on the maximum flooding surface. A sequence stratigraphic framework was established that revealed the distribution of sedimentary systems. Seven depositional systems, namely, alluvial fan, fan delta, braided-delta, shore lacustrine, shallow lacustrine, semi-deep lacustrine and incised valley depositional system, were identified from 105 well logs and 2?D seismic lines covering 1600?km. The sedimentary system distribution was identified as follows: (1) large-scale alluvial deposit located on the southern slope and adjacent to Kunlun Mountain and Yaber tectonic zone located northeast of the study area; (2) braided-delta deposits southeast of the Sanhu area; (3) widely developed fan-delta sediments on the base of Qigequan Formation in the Yaber tectonic zone; (4) well-deposited shoal lacustrine facies along the depositional strike in the regressive systems tract; (5) widely distributed shallow lacustrine facies; and (6) incised valley with large lateral extension and incision depth as an entity at the front of the Golmud Basin in the Sanhu area. Two different depositional models, namely, east and west models, were built by conducting an integrated analysis of sequence stratigraphy and sedimentary process. In the Sanhu area, the main controlling factors of the sequence architecture and depositional systems associations of the Qigequan Formation are tectonic subsidence and climate change with sediment supply and lake-level fluctuation secondary factors. This case study provides an example of the analyses of sequence stratigraphy and depositional systems in a salinised plateau basin. The approach combines seismic and sedimentary facies analysis to investigate Quaternary deposition and stratigraphy. The low-amplitude tectonic belt on the northern slope and the lithological traps on the southern slope are predicted to be favourable for the lithological gas reservoirs.     

基于GPR图像的福建海坛岛北部海岸冲积扇沉积构造及其成因的初步研究

福建海坛岛北部海岸发育一座覆盖淡灰黄色风成砂层、相对高度达30 m的大沙山,外貌很像风成大沙丘,但同时又具有冲积扇形态。其成因和沉积环境有待考证,而探明大沙山内部沉积构造是判别其成因的主要途径之一。在野外考察的基础上,运用探地雷达（GPR）对大沙山内部沉积构造进行探测,获得约20 m深度范围内的沉积构造图像数据。结果表明:大沙山中上部发育由棱角状砾石或粗砂细砂组成的沉积旋回和沟槽沉积构造,显示出冲积扇上部的沉积构造组合特点;中下部层面中交替呈现弧形沉积构造,大沙山南侧发育有向南倾斜28°～30°的前积层理。结合大沙山西侧冲沟剖面沉积构造、大沙山表面的棱角状砾石特征以及现代风沙地貌分布规律,初步认为大沙山是山前多期沟谷洪流携带的碎屑物沉积形成的冲积扇残余堆积体,沉积间隙受海岸带风沙活动影响。     

Depositional bias and environmental change—important factors in sequence stratigraphy

Differences among depositional systems, here called depositional bias, strongly influence sequence patterns. Siliciclastics and shallow-water carbonates, for instance, shed most of their sediment during opposite phases of a sea-level cycle (lowstand shedding and highstand shedding, respectively). Furthermore, the two systems generate their own, system-specific relief on the sea floor, disperse their sediment load along different avenues and differ in the way they are deactivated: reefs and carbonate platforms can be drowned, whereas siliciclastic deposition can be shut off and renewed at any depth. As a consequence of these differences, pronounced unconformities (drowning unconformities) develop where carbonate platforms are terminated and buried by siliciclastics (the siliciclastic-to-carbonate transition tends to be more gradual). Drowned platforms and drowning unconformities appeared world-wide in great abundance in the Miocene, Cretaceous (Valanginian-Turonian), Jurassic (Toarcian) and Devonian (Frasnian/Famennian). Examples of drowning unconformities interpreted as sequence boundaries, include those of the Early Cretaceous platforms off New Jersey and off Morocco, the mid-Cretaceous unconformity in the Gulf of Mexico and Miocene unconformities on top of reefs in the Far East.

The eustatic cycles postulated from sequence stratigraphy are a very unlikely cause for the mass drownings of reefs and platforms: either the rates of rise are an order of magnitude lower than the growth potential of platforms, or cycle amplitudes are too small, or the cycles are too short and subsidence too slow to remove platforms permanently from the photic zone. The critical element in the mass drowning seems to be environmental stress that reduces the growth potential of carbonate systems. Thus, drowning unconformities demonstrate the importance of environmental change as a control on sequence development. Other examples of dominantly environment-controlled sequences include slope deposits shaped by shifting currents (e.g. Florida and Blake Plateau) and basin fills that were controlled by changes in sediment input related to tectonic alteration of the drainage in the hinterland (e.g. Gulf of Mexico).

Environmental change must be considered as a third, independent factor that competes with eustatic and tectonically driven regional changes of sea-level for control of sequences. The definition of sequences and sequence boundaries should be broad enough to include the possibility of non-sea-level controls.     

准噶尔盆地车排子凸起多物源复杂沉积体系中的地震沉积学

准噶尔盆地车排子凸起新近系沙湾组为湖盆缓坡多物源、复杂沉积体系沉积,其沉积体系认识争议很大,时空演化难以刻画.准确刻画其沉积体系类型、演化规律和砂体分布特征,是精细刻画单砂体及内部构型等储层的基石,对后期油气开发具有重要指导意义.在岩心、测井、测试分析及地震资料,充分利用相位转换、地层切片等地震沉积学技术方法,对其沉积体系特征进行深入研究.建立研究区精细层序地层格架,将沙湾组划分为2个三级层序、4个四级层序;识别出冲积扇、辫状河、曲流河、曲流河三角洲、扇三角洲及滨浅湖6种沉积体系类型,并确定沉积体系边界及演化规律;建立了多物源冲积扇-辫状河、扇三角洲-曲流河三角洲沉积模式及砂体分布模式.辫状河道、心滩、点坝复合体及冲积扇砂体均钻遇较好油气显示,为重要储集体.此次研究丰富了地震沉积学在湖盆缓坡多物源、多沉积体系类型中的应用.      

沉积盆地的层序和沉积充填结构及过程响应

现代层序地层学的理论发展,把沉积过程纳入到地质演化的时空框架中并与地球的多旋回或节律演化结合研究,形成了一套带有革命性的、在等时地层格架中研究沉积作用的新方法,成为了油气资源等沉积矿产预测勘探的重要工具。沉积盆地的沉积充填可划分出与各级沉积旋回相对应的层序地层单元。追踪对比由不整合面或不整合面及其对应的整合面为界的高级别层序地层单元建立的区域性等时地层格架,对盆地构造古地理再造和油气勘探战略性研究至关重要;追踪四、五级等低级别层序地层单元和体系域建立的高精度层序地层格架,可为重点区域或区带的沉积体系和储集体的沉积构成和分布等的解剖提供精细的地层对比基础。依据沉积基准面的变化,从层序内水进到水退的沉积旋回中可划分出正常水退沉积、强制性水退沉积、水进沉积及垂向加积等成因沉积类型。海相或湖相盆地中三级层序地层单元内均可较好地划分出低位、水进、高位及下降体系域。盆地构造作用、气候变化、海、湖平面升降过程对层序发育的控制作用及沉积响应研究,一直是层序地层学或沉积地质分析领域的研究热点。沉积盆地的层序地层序列演化是盆地地球动力学过程的总体响应。层序地层学把盆地古构造、古地理的变迁纳入到统一的地球演化系统中研究,形成了与区域地球演化史或盆地动力学演化相结合的重要研究领域。多旋回盆地或叠合盆地中多期次的构造变革导致了多个区域性不整合面所分隔的多个构造层序的叠加。注重构造—层序地层的结合分析,揭示盆地的层序地层序列与多期盆地构造作用的成因联系,是构造活动盆地或大型叠合盆地沉积地质演化和油气聚集规律研究的关键。盆地构造作用,如前陆盆地多期次的逆冲挠曲沉降和回弹隆起的构造作用、多幕裂陷过程、多期构造反转等与重要不整合及区域性沉积旋回或层序的形成密切相关;而由气候变化引起的海或湖平面变化是控制高频沉积旋回或低级别层序发育的主要因素。在构造活动盆地中,构造坡折带对沉积体系域和沉积相的发育分布具重要控制作用。     

Sequence stratigraphy in the upper cretaceous of the Basco-Cantabrian Basin (northern Spain)

The sedimentary cycles of the Cenomanian to Maastrichtian were investigated in the Basco-Cantabrian Basin (BCB) in northern Spain (Provinces of Alava, Vizcaya and Burgos). The depositional area was a distally steepened carbonate ramp which extended from Catalonia northwestwards to the Basque country. The investigated sediments range from calciturbidites and pelagic marls to marl-limestone alternations deposited on a distal carbonate ramp. Shallow marine limestones, marls and intertidal clastics and carbonates were deposited on the proximal part of the carbonate ramp. The establishment of a regional sequence analysis is based on the investigation of seismic profiles, well logs and outcrop sections. Examples of outcrop sections are interpreted in terms of sequence stratigraphy (unconformities of third- and second-order cycles, depositional geometries, systems tracts). The sequence stratigraphic interpretation of outcrop sections is based on facies analysis, interpretation of observed depositional geometries and correlation of unconformities and marine flooding surfaces through the basin. A biostratigraphic framework is established based on ammonites, inoceramids, planktonic and benthic foraminifera. As a result, a regional sequence stratigraphic cycle chart is presented and compared with published global cycle charts. The correlation of the regional cycle chart with published cycle charts is good. In the Cenomanian and Turonian, several sequence boundaries in the BCB are shifted by up to one biozone compared with the global chart. Some type 1 boundaries of the standard chart are only type 2 in the BCB. Important type 1 boundaries in the BCB are: top Geslinianum Zone with a 100 m lowstand wedge at the basis of the sequence (sequence boundary 92.2) ; base Petrocoriense Zone with a 250 m shallowing-upwards lowstand wedge at the basis (sequence boundary 89.2); and within the Syrtale Zone (sequence boundary 85.0).The Campanian-Maastrichtian sequence record is strongly disturbed by local compressive tectonics. Several sequences are recognizable and can be correlated with the global cycle chart. Correlation is hampered by the low biostratigraphic resolution in the western basin part. Subsidence analysis of several sections of the Upper Cretaceous of the BCB and its interpretation in the regional tectonic context leads to a discussion of the causes of the observed cyclicity. A regional eustatic curve is presented for the Upper Cretaceous of the BCB. Stage and substage names were used according Code-Committee (1977). Correspondence to: K.-U. Gräfe     

From outwash to coastal systems in the Portneuf–Forestville deltaic complex (Québec North Shore): Anatomy of a forced regressive deglacial sequence

Deglacial sequences typically include backstepping grounding zone wedges and prevailing glaciomarine depositional facies. However, in coastal domains, deglacial sequences are dominated by depositional systems ranging from turbiditic to fluvial facies. Such deglacial sequences are strongly impacted by glacio‐isostatic rebound, the rate and amplitude of which commonly outpaces those of post‐glacial eustatic sea‐level rise. This results in a sustained relative sea‐level fall covering the entire depositional time interval. This paper examines a Late Quaternary, forced regressive, deglacial sequence located on the North Shore of the St. Lawrence Estuary (Portneuf Peninsula, Québec, Canada) and aims to decipher the main controls that governed its stratigraphic architecture. The forced regressive deglacial sequence forms a thick (>100 m) and extensive (>100 km²) multiphased deltaic complex emplaced after the retreat of the Laurentide Ice Sheet margin from the study area ca 12 500 years ago. The sedimentary succession is composed of ice‐contact, glaciomarine, turbiditic, deltaic, fluvial and coastal depositional units. A four‐stage development is recognized: (i) an early ice‐contact stage (esker, glaciomarine mud and outwash fan); (ii) an in‐valley progradational stage (fjord head or moraine‐dammed lacustrine deltas) fed by glacigenics; (iii) an open‐coast deltaic progradation, when proglacial depositional systems expanded beyond the valley outlets and merged together; and (iv) a final stage of river entrenchment and shallow marine reworking that affected the previously emplaced deltaic complex. Most of the sedimentary volume (10 to 15 km³) was emplaced during the three‐first stages over a ca 2 kyr interval. In spite of sustained high rates of relative sea‐level fall (50 to 30 mm·year^?1), delta plain accretion occurred up to the end of the proglacial open‐coast progradational stage. River entrenchment only occurred later, after a significant decrease in the relative sea‐level fall rates (<30 mm·year^?1), and was concurrent with the formation and preservation of extensive coastal deposits (raised beaches, spit platform and barrier sands). The turnaround from delta plain accretion to river entrenchment and coastal erosion is interpreted to be a consequence of the retreat of the ice margin from the river drainage basins that led to the drastic drop of sediment supply and the abrupt decrease in progradation rates. The main internal stratigraphic discontinuity within the forced regressive deglacial sequence does not reflect changes in relative sea‐level variations.     

中伊朗盆地卡尚地区库姆组层序地层研究

利用野外露头、钻井和地震资料．通过岩相、沉积旋回以及地震层序和地震相分析建立中伊朗盆地库姆组的层序地层系统、框架模式及沉积体系，岩性地层单元与沉积层序的对应关系。研究发现库姆组沉积于一个受全球海平面升降变化及区域构造活动影响而与波斯湾间歇性相通的弧后大陆边缘海盆地，是一顶底面以不整合界面为界的构造层序(超层序组)，其内部发育3个3级层序。依据库姆组沉积时的盆地形态和沉积环境分析将盆地分为岛弧、台地、斜坡、盆地4个次级构造一沉积单元。盆地南缘为障壁岛，由于陆源碎屑少，南带及中带沉积碳酸盐岩为主；而北东缘为陆地，陆源(火山)碎屑供应充分，发育扇、河控三角洲沉积体系；东南岛弧带则沉积碳酸盐岩夹火山碎屑岩为主。     

Deep incision in an Aptian carbonate succession indicates major sea‐level fall in the Cretaceous

Long‐term relative sea‐level cycles (0·5 to 6 Myr) have yet to be fully understood for the Cretaceous. During the Aptian, in the northern Maestrat Basin (Eastern Iberian Peninsula), fault‐controlled subsidence created depositional space, but eustasy governed changes in depositional trends. Relative sea‐level history was reconstructed by sequence stratigraphic analysis. Two forced regressive stages of relative sea‐level were recognized within three depositional sequences. The first stage is late Early Aptian age (intra Dufrenoyia furcata Zone) and is characterized by foreshore to upper shoreface sedimentary wedges, which occur detached from a highstand carbonate platform, and were deposited above basin marls. The amplitude of relative sea‐level drop was in the order of tens of metres, with a duration of <1 Myr. The second stage of relative sea‐level fall occurred within the Late Aptian and is recorded by an incised valley that, when restored to its pre‐contractional attitude, was >2 km wide and cut ≥115 m down into the underlying Aptian succession. With the subsequent transgression, the incision was backfilled with peritidal to shallow subtidal deposits. The changes in depositional trends, lithofacies evolution and geometric relation of the stratigraphic units characterized are similar to those observed in coeval rocks within the Maestrat Basin, as well as in other correlative basins elsewhere. The pace and magnitude of the two relative sea‐level drops identified fall within the glacio‐eustatic domain. In the Maestrat Basin, terrestrial palynological studies provide evidence that the late Early and Late Aptian climate was cooler than the earliest part of the Early Aptian and the Albian Stage, which were characterized by warmer environmental conditions. The outcrops documented here are significant because they preserve the results of Aptian long‐term sea‐level trends that are often only recognizable on larger scales (i.e. seismic), such as for the Arabian Plate.     

Anatomy of an Upper Triassic continental to marginal‐marine system: the mixed siliciclastic–carbonate Travenanzes Formation (Dolomites,Northern Italy)

The Travenanzes Formation is a terrestrial to shallow‐marine, siliciclastic–carbonate succession (200 m thick) that was deposited in the eastern Southern Alps during the Late Triassic. Sedimentary environments and depositional architecture have been reconstructed in the Dolomites, along a 60 km south–north transect. Facies alternations in the field suggest interfingering between alluvial‐plain, flood‐basin and shallow‐lagoon deposits, with a transition from terrestrial to marine facies belts from south to north. The terrestrial portion of the Travenanzes Formation consists of a dryland river system, characterized by multicoloured floodplain mudstones with scattered conglomeratic fluvial channels, merging downslope into small ephemeral streams and sheet‐flood sandstones, and losing their entire discharge subaerially before the shoreline. Calcic and vertic palaeosols indicate an arid/semi‐arid climate with strong seasonality and intermittent discharge. The terrestrial/marine transition shows a coastal mudflat, the flood basin, which is usually exposed, but at times is inundated by both major river floods and sea‐water storm surges. Locally coastal sabkha deposits occur. The marine portion of the Travenanzes Formation comprises carbonate tidal‐flat and shallow‐lagoon deposits, characterized by metre‐scale shallowing‐upward peritidal cycles and subordinate intercalations of dark clays from the continent. The depositional architecture of the Travenanzes Formation suggests an overall transgressive pattern organized in three carbonate–siliciclastic cycles, corresponding to transgressive–regressive sequences with internal higher‐frequency sedimentary cycles. The metre‐scale sedimentary cyclicity of the Travenanzes Formation continues without a break in sedimentation into the overlying Dolomia Principale. The onset of the Dolomia Principale epicontinental platform is marked by the exhaustion of continental sediment supply.