Fluvial processes and facies sequences in the sandy braided South Saskatchewan River, Canada

The South Saskatchewan River has a long term average discharge of 275 m³/sec, with flood peaks in the range of 1500 to 3800 m³/sec. South of Saskatoon, the four major types of geomorphological elements recognised are channels, slipface-bounded bars, sand flats and vegetated islands and floodplains. Major channels are 3-5 m deep, up to 200 m wide, and flow around sand flats which are 50-2000 m long, and around vegetated islands up to 1 km long. At areas of flow expansion, long straight-crested cross-channel bars form. During falling stage, a small part of the crest of the cross-channel bar may become emergent, and act as a nucleus for downstream and lateral growth of a new sand flat. The dominant channel bedforms are dunes, which deposit trough cross bedding. Cross-channel bars deposit large sets of planar tabular cross bedding. Sand flats that grow from a nucleus on a cross-channel bar are mostly composed of smaller planar tabular sets, with some parallel lamination, trough cross-bedding, and ripple cross-lamination. A typical facies sequence related to sand flat growth would consist of in-channel trough cross-bedding, overlain by a large (1-2 m) planar tabular set (cross-channel bar), overlain in turn by a complex association mostly of small planar tabular cross-beds, trough cross-beds and ripple cross-lamination. By contrast, a second stratigraphic sequence can be proposed, related only to channel aggradation. It would consist dominantly of trough cross-beds, decreasing in scale upward, and possible interrupted by isolated sets of planar tabular cross-bedding if a cross-channel bar formed, but failed to grow into a sand flat. During final filling of the channel, ripple cross-lamination and thin clay layers may be deposited. In the S. Saskatchewan, these sequences are a minimum of 5 m thick, and are overlain by 0.5-1 m of silty and muddy vertical accretion deposits.     

The Table Rocks Sandstone: A fluvial, friction-dominated lobate mouth bar sandbody in the Westphalian B Coal Measures, NE England

Westphalian B (Duckmantian) alluvial Coal Measures along the Northumberland coast, NE England, comprise coal-capped coarsening-upward crevasse-splay sequences of shale, siltstone and sandstone, interbedded with a number of major distributary channel sandbodies, including the Table Rocks Sandstone. Lithofacies, architectural analysis and outcrop geometries divide the Table Rocks Sandstone into flaggy sandstone, massive sandstone, heterolithic, and mudstone facies associations, each comprising up to 7 lithofacies types. The three sandy facies associations are characterised by lenticular bed geometries on different scales producing a hierarchy of lensoid packages and associated bounding surfaces, all showing typical offset stacking patterns: (1) lenses, represent individual lenticular cross-bed sets, bounded by 1st order surfaces; (2) packages of lenses, called lens clusters are bounded by 2nd order surfaces, and are the basic architectural building block of the sandy facies associations; and (3) vertically stacked lens clusters called amalgamated lens clusters, bounded by 3rd order surfaces. The Table Rocks sandbody has a laterally extensive, irregular, lobate subsurface plan geometry, it displays a radial palaeocurrent pattern with 180° dispersion, and it forms part of a 14-m thick coarsening-upward regressive sequence. It is interpreted as a composite, lobate crevasse-splay delta system that prograded into a shallow interdistributary fresh to brackish water lake up to 14 m deep. The shallow lake water, fluvial input, and extensive development of traction structures such as cross-bedding and ripple cross-lamination suggests a friction-dominated delta, in which the four facies associations can be interpreted in terms of discrete elements of the mouth bar environment. The flaggy sandstone facies association represents the main, axial part of the mouth bar system, the erosively based massive sandstone facies association major subaqeous distributary channels, the lithologically more variable heterolithic facies association the medial mouth bar, and the mudstone facies association the distal mouth bar fringe and prodelta. Within this environmental setting amalgamated lens clusters are interpreted as small, discrete mouth bar sand lobes, whose offset, imbricate stacking pattern reflects channel spacing and bifurcation, the rate of channel shifting, or shallow depths and lack of accommodation space. Thus, lens clusters are interpreted as discrete growth elements of the mouth bar sand lobes, and lenses as individual bedforms making up these growth elements. Because of the high rate of channel shifting, lack of extensive erosion of the mouth bar lobes, and deposition of low discharge fines, the lobes retained much of their original depositional geometry, thereby providing advantageous gradients for offset deposition and stacking of adjacent sand lobes. Although the delta complex was maintained by frequent crevassing from the feeder channel, and by subsidence due to contemporaneous compaction and/or local tectonism, it was deeply incised on two occasions by subaqeous channels in response to high magnitude floods or falling lake level.     

A subtidal bar model for the eze-aku sandstones,Nigeria

“Coarsening upward” successions typical of subtidal sand bars have been recognised in the NE-trending linear sandstone bodies which occur within marine shale in the Eze-Aku Formation (Upper Cretaceous) of southeastern Nigeria.The ideal succession, 15–20 m thick, consists of the following units from bottom to top: (1) bioturbated grey siltstone (offshore mud); (2) wave-ripple-laminated, fine-grained well-sorted sandstone (offshore sands); (3) trough and tabular, cross-bedded medium-grained sandstone with channelled base (subtidal channel complex); (4) trough cross-bedded, medium-grained sandstone with bimodal-bipolar paleocurrent pattern (subtidal bar); (5) coarse, pebbly trough cross-bedded sandstone with wave-rippled top, rare burrows and a bimodal-bipolar paleocurrent pattern (subtidal bar). A sixth facies, not a part of the normal sequence, consists of coarse, carbonate-cemented pebbly sandstone grading into pure shell-limestone (bar margin).The sand bars seem to have grown on a shallow mud-bottomed, wave-worked inland sea inhabited by burrowers. A model for the stages of the vertical growth of the bar is presented.     

Preservation of pre-vegetational mixed fluvio–aeolian deposits in a humid climatic setting: an example from the Middle Proterozoic Eriksfjord Formation, Southwest Greenland

Sedimentological studies of a 30 m thick coastal cliff section within the Middle Proterozoic Eriksfjord Formation in western South Greenland reveals three distinct types of fluvial sand sheet deposits that reflect perennial streams (Type I), semi-perennial streams (Type II), and ephemeral flash floods (Type III). Perennial river sand sheets are characterised by co-sets of medium-scale trough cross-beds, interbedded with isolated medium- and large-scale, high-angle, tabular cross-beds. Indications of desiccation or subaerial exposure are absent. Semi-perennial fluvial sand sheets consist predominantly of low-angle cross-beds, interbedded with isolated sets of high-angle tabular cross-beds with common reactivation surfaces. Horizontal lamination and climbing ripple lamination form subordinate structures. Associated with the sand sheets are adhesion structures and 0.05–0.4 m thick sets of wind ripple-lamination indicating periods of subaerial exposure and aeolian reworking. High-energy ephemeral flash flood sand sheets consist almost exclusively of planar-parallel lamination and climbing ripple lamination with some isolated sets of low-angle cross-bedding. Scouring and internal truncation surfaces are common. The three types of sand sheets are considered to reflect deposition under changing climatic conditions, varying from humid to arid or semi-arid. Aeolian deposits are preserved within the sand sheets showing characteristics of dominantly perennial flow punctuated by shorter periods of desiccation (Type II), while sand sheets showing features typical of arid and or semi-arid flow conditions (Type III) contain no preserved aeolian deposits. This selective preservation is interpreted to be a result of the combined effect of groundwater table level and fluvial style which in turn are inferred to have been controlled by the climatic regime. The deposits show that during pre-vegetational times the preservation of aeolian deposits, under certain conditions, may be more optimal in fluvial systems formed in a humid climate than in fluvial systems formed under semi-arid or arid circumstances. The occurrence of aeolian deposits within a Precambrian succession of fluvial deposits therefore, need not be an indication of the most arid environmental conditions.     

Terrestrial-marine transition in the Cambrian rocks of Kangaroo Island, South Australia

The upper part of the Lower Cambrian succession in northeast Kangaroo Island comprises three interbedded facies associations. The fine-grained association is composed of siltstone, mudstone and minor sandstone. It contains flat lamination and abundant ripple cross-lamination which shows bipolar palaeocurrents, and occurs in combinations of flaser bedding, lenticular bedding and wavy lamination. Although body fossils are relatively rare, trilobite traces and desiccation cracks are common, and the association is interpreted as a predominantly subtidal to intertidal deposit. The conglomerate facies association contains horizontally bedded cobble to boulder conglomerate, with subordinate trough cross-stratified coarse sandstone to granule/pebble conglomerate. Fabrics and structures in the coarse conglomerates are consistent with alluvial transport (stream and debris flow), but not beach deposition. The conglomerate association is attributed to tectonic uplift and erosion of a Precambrian-Lower Cambrian succession developed adjacent to the present north coast of Kangaroo Island. Southward progradation of an alluvial fan complex occurred across east-west oriented tidal flats on which limited wave activity reworked sand and fine gravel, but not coarser material. The sandstone facies association mainly comprises trough cross-stratified and plane-laminated sandstone, the latter with current lineation predominantly sub-parallel to the east-west shoreline. Trough cross-stratification is ascribed to onshore waves and longshore currents, and current lineation to predominantly shore-parallel tidal currents, augmented by longshore drift and storm surge. Tectonic movements gave rise to cycles of transgression and regression as tidal and alluvial processes dominated alternately.     

Sedimentology of an ancient erg margin: the Lower Jurassic Aztec Sandstone, southern Nevada and southern California

The Lower Jurassic Aztec Sandstone is an aeolian-deposited quartzose sandstone that represents the western margin of the southerly-migrating Navajo-Nugget sand sea (or erg). Vertical and lateral facies relations suggest that the erg margin encroached upon volcanic highlands, alluvial fan, wadi and sabkha environments. In southern Nevada, 700 m thick facies successions record the arrival of the Aztec sand sea. Initial erg sedimentation in the Valley of Fire consists of lenticular or tongue-shaped aeolian sand bodies interstratified with fluvially-deposited coarse sandstone and mudstone. Above, evaporite-rich fine sandstone and mudstone are overlain by thick, cross-stratified aeolian sandstone that shows an upsection increase in set thickness. The lithofacies succession represents aeolian sand sheets and small dunes that migrated over a siliciclastic sabkha traversed by ephemeral wadis. These deposits were ultimately buried by large dunes and draas of the erg. In the Spring Mountains, a similar facies succession also contains thin, lenticular volcaniclastic conglomerate and sandstone. These sediments represent the distal margin of an alluvial fan complex sourced from the west. Thin aeolian sequences are interbedded with volcanic flow rocks, ash-flow tuffs, debris flows, and fluvial deposits in the Mojave Desert of southern California. These aeolian strata represent erg migration up the eastern flanks of a magmatic arc. The westward diminution of aeolian-deposited units may reflect incomplete erg migration, thin accumulation of aeolian sediment succeptible to erosion, and stratigraphic dilution by arc-derived sediment. A two-part division of the Aztec erg is suggested by lithofacies associations, the size and geometry of aeolian cross-strata, and sediment dispersal data. The leading or downwind margin of the erg, here termed the fore-erg, is represented by a 10–100 m thick succession of isolated pods, lenses, and tongues of aeolian-deposited sediment encased in fluvial and sabkha deposits. Continued sand-sea migration brought large dunes and draas of the erg interior into the study area; these 150–500 m thick central-erg sediments buried the fore-erg deposits. The trailing, upwind margin of the erg is represented by back-erg deposits in northern Utah and Wyoming.     

Shallow marine sand bar sequences: an example from the late Precambrian of North Norway

Five coarsening upward shallow marine sandstone sequences (2–10 m thick), are described from the late Precambrian of North Norway, where they occur in a laterally continuous and tectonically undeformed outcrop. The sequences consist of five facies with distinct assemblages of sedimentary structures and palaeocurrent patterns. Each facies is the product of alternate phases of sedimentation during relatively high- and low-energy periods. Facies 1 to 4 are interpreted as representing prograding, subtidal sand bars. Sand bar progradation occurred during the highest energy periods when unidirectional currents flowed to the northwest, depositing trough cross-bedded sandstones (facies 3 and 4) on the bar crests and flanks, and sheet sandstone beds (facies 1 and 2) in the offshore environments. Weaker northwesterly flowing currents continued during moderate energy fair weather periods. Low energy fair weather periods were dominated by wave processes, which formed largescale, low-angle, westerly inclined surfaces on the bar flanks (facies 4) and wave rippled sandstone beds (facies 2) and flat laminated siltstone layers (facies 1) in the offshore environments. One sand bar was dissected by channels and infilled by tabular cross-bedded sandstones (facies 5). Bipolar palaeocurrent evidence, with two modes separated into two laterally equivalent channel systems, suggests deposition by tidal currents in mutually evasive ebb and flood channels. The inferred processes of these sand bars are compared with those associated with modern storm-generated and tidal current generated linear sand ridges. Both are influenced by the interaction of relatively low and high energy conditions. The presence of the tidal channel facies, however, combined with the inferred strong bottom current regime, is more analogous to a tidal current hydraulic regime.     

Sheetflow fluvial processes in a rapidly subsiding basin, Altiplano plateau, Bolivia

Although facies models of braided, meandering and anastomosing rivers have provided the cornerstones of fluvial sedimentology for several decades, the depositional processes and external controls on sheetflow fluvial systems remain poorly understood. Sheetflow fluvial systems represent a volumetrically significant part of the non‐marine sedimentary record and documented here are the lithofacies, depositional processes and possible roles of rapid subsidence and arid climate in generating a sheetflow‐dominated fluvial system in the Cenozoic hinterland of the central Andes. A 6500 m thick succession comprising the Late Eocene–Oligocene Potoco Formation is exposed continuously for >100 km along the eastern limb of the Corque syncline in the high Altiplano plateau of Bolivia. Fluvial sandstone and mudstone units were deposited over an extensive region (>10 000 km²) with remarkably few incised channels or stacked‐channel complexes. The Potoco succession provides an exceptional example of rapid production of accommodation sustained over a prolonged period of time in a non‐marine setting (>0·45 mm year⁻¹ for 14 Myr). The lower ≈4000 m of the succession coarsens upward and consists of fine‐grained to medium‐grained sandstone, mudstone and gypsum deposits with palaeocurrent indicators demonstrating eastward transport. The upper 2500 m also coarsens upward, but contains mostly fine‐grained to medium‐grained sandstone that exhibits westward palaeoflow. Three facies associations were identified from the Potoco Formation and are interpreted to represent different depositional environments in a sheetflow‐dominated system. (i) Playa lake deposits confined to the lower 750 m are composed of interbedded gypsum, gypsiferous mudstone and sandstone. (ii) Floodplain deposits occur throughout the succession and include laterally extensive (>200 m) laminated to massive mudstone and horizontally stratified and ripple cross‐stratified sandstone. Pedogenic alteration and root casts are common. (iii) Poorly confined channel and unconfined sheet sandstone deposits include laterally continuous beds (50 to >200 m) that are defined primarily by horizontally stratified and ripple cross‐stratified sandstone encased in mudstone‐rich floodplain deposits. The ubiquitous thin‐sheet geometry and spatial distribution of individual facies within channel sandstone and floodplain deposits suggest that confined to unconfined, episodic (flash) flood events were the primary mode of deposition. The laterally extensive deposition and possible distributary nature of this sheetflow‐dominated system are attributed to fluvial fan conditions in an arid to semi‐arid, possibly seasonal, environment. High rates of sediment accumulation and tectonic subsidence during early Andean orogenesis may have favoured the development and long‐term maintenance of a sheetflow system rather than a braided, meandering or anastomosing fluvial style. It is suggested here that rapidly produced accommodation space and a relatively arid, seasonal climate are critical conditions promoting the generation of sheetflow‐dominated fluvial systems.     

山东诸城棠棣戈庄早白垩世晚期恐龙足迹化石新发现及其意义*

新近野外调查发现,山东诸城西北棠棣戈庄下白垩统大盛群发育蜥脚类恐龙足迹化石,其赋存于大盛群田家楼组紫红色细砂岩、泥质粉砂岩、粉砂质泥岩和黄绿色粉砂岩韵律层中。研究区共发现29个恐龙足迹化石,其中有23个构成1条半圆形行迹,初步研究确定造迹者为蜥脚类恐龙,个体较小、身长3～4m、处于漫步状态。根据岩层中共生发育的小型槽状交错层理、板状交错层理、爬升波纹层理、水平层理、雨痕、泥裂等沉积构造,认为研究区下白垩统大盛群为滨浅湖沉积,可进一步划分出砂质滩坝、滩坝边缘、沙泥混合滩及泥滩等沉积微相,恐龙足迹化石产在砂质滩坝微相细砂岩、粉砂岩层面上。河湖相细砂岩、粉砂岩有利于恐龙足迹化石赋存,也暗示蜥脚类恐龙喜好在湖岸边活动,表明生活习性与生存环境具有一定的相互制约关系。     

The role of wave reworking on the architecture of storm sandstone facies, Bell Island Group (Lower Ordovician), eastern Newfoundland

Stacked shallow marine cycles in the Lower Ordovician, Bell Island Group, of Bell Island, Newfoundland, show upward thickening and upward coarsening sequences which were deposited on a storm-affected shelf. In the Beach Formation each cycle has a facies sequence comprised, from base to top, of dark grey mudstones, light grey mudstones, tabular sandstones and mudstones, lenticular sandstones and mudstones, and thick bedded lenticular sandstones, reflecting a progressive increase of wave orbital velocities at the sediment surface. The mudstones and tabular sandstones reflect an environment in which the sea floor lay in the lower part of the wave orbital velocity field and in which tempestites were deposited as widespread sheets from weak combined flow currents. The lenticular sandstones in the succeeding facies are wave reworked sands, commonly lying in erosional hollows and having erosional tops and internal hummocky cross-stratification. Planar lamination is relatively uncommon and sole marks are mainly absent. In this facies oscillatory currents were dominant and accumulated sand in patches generally 10–30 m in diameter. The facies formed on the inner shelf where the oscillatory currents generated by storm waves had powerful erosional effects and also determined the depositional bedforms. Mud partings and second-order set boundaries within sandstone beds are believed to separate the products of individual storms so that many lenticular sandstone beds represent the amalgamation of several event beds. This interpretation has important implications for attempts to estimate event frequency by counting sandstone beds within a sequence and for estimates of sand budgets during storm events. The thick bedded lenticular facies appears to have been formed by erosion of the mud beds between the lenticular sands, leading to nearly complete amalgamation of several lenticular sand bodies except for residual mud partings. In the overlying Redmans Formation the process of amalgamation progressed even further so that nearly all the mud partings were removed, resulting in the formation of thick bedded tabular sandstones. Sequence stratigraphic analysis of the cyclical sequence suggests that the cycles were eustatically controlled. The rising limb of the sea level curve produced only the dark grey mudstone part of the cycle while the remainder of the cycle was deposited on the falling limb. There is a gradational but rapid facies transition from the tabular to the lenticular sandstone facies which is interpreted as occurring at the inflexion point on the falling limb. The thick bedded facies of the Beach Formation and the thick bedded tabular facies of the Redmans Formation represent periods of maximum sea level fall. The stacked cycles in the Beach Formation are interpreted as an aggradational, high frequency sequence or parasequence set bounded at the top by a sequence boundary and succeeded by the three aggradational parasequences of the Redmans Formation. The recognition of storm facies with sandstone beds of very different bed length has important implications for the reservoir modelling of such facies.     

Regional sedimentological variations in lower triassic fluvial conglomerates (budleigh salterton pebble beds), southwest england: Some implications for palaeogeography and basin evolution

The Budleigh Salterton Pebble Beds (BSPD) are a 20–30 m thick formation of conglomerates and subordinate sandstones which crop out along the western margin of the Wessex Basin. The formation has previously been interpreted as representing a major conduit for southerly-derived (Armorican) detritus and as signalling the start of early Triassic rifting. In this paper the role of the BSPB in the evolution of the Wessex Basin is reassessed. In the south of the outcrop, the lower portions of the BSPB are dominated by extensive (> 50m) sheets or narrow lenses of planar cross-bedded conglomerate (sets 1–3m thick). This reflects deposition from linguoid-shaped bars whose downstream margins were bounded by slipfaces. These accreted at anabranch confluences and as bank-attached bars in relatively confined and channelized gravel-bed streams. Most of the rest of the BSPB consists of couplets of horizontally-bedded conglomerate overlain by large-scale trough cross-bedded sandstone. This style of accretion represents deposition from relatively low-relief gravel bars and large sand dunes in substantial but poorly confined channels. Towards the top of the BSPB in the central parts of the outcrop, there is a change to thinner-bedded units with more lenticular and ribbon-like geometries. This represents deposition in smaller and more flashy streams. The BSPB was deposited either on a braidplain or by an antecedent ‘wet’ alluvial fan. In both settings, the BSPB streams were exotic, draining basins to the south of the Wessex Basin. This implies that the BSPB did not necessarily develop in response to differential subsidence and rifting within the Wessex Basin.     

Sedimentological and provenance response to Cambrian closure of the Clymene ocean: The upper Alto Paraguai Group,Paraguay belt,Brazil

Final Gondwana amalgamation was marked by the closure of the Neoproterozoic Clymene ocean between the Amazonia craton and central Gondwana. The events which occurred in the last stage of this closure were recorded in the upper Alto Paraguai Group in the foreland of the Paraguay orogen. Outcrop-based facies analysis of the siliciclastic rocks of upper Alto Paraguai Group, composed of the Sepotuba and Diamantino Formations, was carried out in the Diamantino region, within the eastern part of the Barra dos Bugres basin, Mato Grosso state, central-western Brazil. The Sepotuba Formation is composed of sandy shales with planar to wave lamination interbedded with fine-grained sandstone with climbing ripple cross-lamination, planar lamination, swaley cross-stratification and tangential to sigmoidal cross-bedding with mud drapes, related to marine offshore deposits. The lower Diamantino Formation is composed of a monotonous, laterally continuous for hundreds of metres, interbedded siltstone and fine-grained sandstone succession with regular parallel lamination, climbing ripple cross-lamination and ripple-bedding interpreted as distal turbidites. The upper part of this formation consists of fine to medium-grained sandstones with sigmoidal cross-bedding, planar lamination, climbing ripple cross-lamination, symmetrical to asymmetrical and linguoid ripple marks arranged in lobate sand bodies. These facies are interbedded with thick siltstone in coarsening upward large-scale cycles related to a delta system. The Sepotuba Formation characterises the last transgressive deposits of the Paraguay basin representing the final stage of a marine incursion of the Clymene ocean. The progression of orogenesis in the hinterland resulted in the confinement of the Sepotuba sea as a foredeep sub-basin against the edge of the Amazon craton. Turbidites were generated during the deepening of the basin. The successive filling of the basin was associated with progradation of deltaic lobes from the southeast, in a wide lake or a restricted sea that formed after 541 ± 7 Ma. Southeastern to east dominant Neoproterozoic source regions were confirmed by zircon grains that yielded ages around 600 to 540 Ma, that are interpreted to be from granites in the Paraguay orogen. This overall regressive succession recorded in the Alto Paraguai Group represents the filling up of a foredeep basin after the final amalgamation of western Gondwana in the earliest Phanerozoic.     

Stacked fluvial and tide-dominated estuarine deposits in high-frequency (fourth-order) sequences of the Eocene Central Basin, Spitsbergen

Eighteen coastal-plain depositional sequences that can be correlated to shallow- to deep-water clinoforms in the Eocene Central Basin of Spitsbergen were studied in 1 × 15 km scale mountainside exposures. The overall mud-prone (>300 m thick) coastal-plain succession is divided by prominent fluvial erosion surfaces into vertically stacked depositional sequences, 7–44 m thick. The erosion surfaces are overlain by fluvial conglomerates and coarse-grained sandstones. The fluvial deposits show tidal influence at their seaward ends. The fluvial deposits pass upwards into macrotidal tide-dominated estuarine deposits, with coarse-grained river-dominated facies followed further seawards by high- and low-sinuosity tidal channels, upper-flow-regime tidal flats, and tidal sand bar facies associations. Laterally, marginal sandy to muddy tidal flat and marsh deposits occur. The fluvial/estuarine sequences are interpreted as having accumulated as a series of incised valley fills because: (i) the basal fluvial erosion surfaces, with at least 16 m of local erosional relief, are regional incisions; (ii) the basal fluvial deposits exhibit a significant basinward facies shift; (iii) the regional erosion surfaces can be correlated with rooted horizons in the interfluve areas; and (iv) the estuarine deposits onlap the valley walls in a landward direction. The coastal-plain deposits represent the topset to clinoforms that formed during progradational infilling of the Eocene Central Basin. Despite large-scale progradation, the sequences are volumetrically dominated by lowstand fluvial deposits and especially by transgressive estuarine deposits. The transgressive deposits are overlain by highstand units in only about 30% of the sequences. The depositional system remained an estuary even during highstand conditions, as evidenced by the continued bedload convergence in the inner-estuarine tidal channels.     

Architecture of an Oligocene fluvial ribbon sandstone in the Ebro Basin,North‐eastern Spain

Fluvial ribbon sandstone bodies are ubiquitous in the Ebro Basin in North‐eastern Spain; their internal organization and the mechanics of deposition are as yet insufficiently known. A quarrying operation in an Oligocene fluvial ribbon sandstone body in the southern Ebro Basin allowed for a three‐dimensional reconstruction of the sedimentary architecture of the deposit. The sandstone is largely a medium‐grained to coarse‐grained, moderately sorted lithic arenite. In cross‐section, the sandstone body is 7 m thick, occupies a 5 m deep incision and wedges out laterally, forming a ‘wing’ that intercalates with horizontal floodplain deposits in the overbank region. Three architectural units were distinguished. The lowest and highest units (Units A and C) mostly consist of medium‐grained to coarse‐grained sandstone with medium‐scale trough cross‐bedding and large‐scale inclined stratasets. Each of Units A and C comprises a fining‐up stratal sequence reflecting deposition during one flood event. The middle unit (Unit B) consists of thinly bedded, fine‐grained sandstone/mudstone couplets and represents a time period when the channel was occupied by low‐discharge flows. The adjoining ‘wing’ consists of fine‐grained sandstone beds, with mudstone interlayers, correlative to strata in Units A and C in the main body of the ribbon sandstone. In plan view, the ribbon sandstone comprises an upstream bend and a downstream straight reach. In the upstream bend, large‐scale inclined stratasets up to 3 m in thickness represent four bank‐attached lateral channel bars, two in each of Units A and C. The lateral bars migrated downflow and did not develop into point bars. In the straight downstream reach, a tabular cross‐set in Unit A represents a mid‐channel transverse bar. In Unit C, a very coarse‐grained, unstratified interval is interpreted as deposited in a riffle zone, and gives way downstream to a large mid‐channel bar. The relatively simple architecture of these bars suggests that they developed as unit bars. Channel margin‐derived slump blocks cover the upper bar. The youngest deposit is fine‐grained sandstone and mudstone that accumulated immediately before avulsion and channel abandonment. Deposition of the studied sandstone body reflects transport‐limited sediment discharges, possibly attaining transient hyperconcentrated conditions.     

Sedimentary features of a Weichselian glaciolacustrine delta

Inclined beds of sand, granules, pebbles and cobbles resembling a glacio-tectonically tilted sequence were shown by sedimentological studies to constitute the 10–12 m thick foreset beds of a glaciolacustrine Gilbert-type delta in Kyndby, North Sjælland, Denmark. The foreset beds are slightly curved, dip 10–28 SE, and display a bundlewise structure with alternating coarse-grained cobble-rich and fine-grained sandy units. The occurrence of ascending megaripple cross-bedding and climbing ripple cross-lamination in the sandy foresets can be ascribed to strong backflow currents formed by the lee-side vortice. The foreset beds are underlain by flat-lying fine-grained sand, silt and clay (bottomset beds), and are overlain transitionally or erosively by 2–3 m of flat-lying sand, pebbles and cobbles (topset beds). In the transition zone between foreset beds and topset beds, various delta distributary channel units occur. The delta probably formed in a partly ice-dammed lake in connection with the general retreat of a Weichselian advance from the north ('Norwegian ice')     

Fluvial sedimentation in the lower carboniferous of Clew Bay,County Mayo,Ireland

A succession of about 300 m of fluvial sediments from the Lower Carboniferous of northwest Ireland is described and interpreted. A lower, mainly red, formation contains fluvial channel deposits dominated by flat laminated sandstone. These are separated by interbedded sandstones and mudrocks with local caliche horizons and abundant mudcracks interpreted as levee and flood basin deposits. An upper, mainly non-red, formation contains fluvial channel deposits with common trough cross-stratification and epsilon cross-stratification also separated by interbedded sandstones and mudrocks. Evidence of desiccation is less common in the uppermost beds which pass transitionally upwards into marine sediments.The change in fluvial channel style is interpreted as due to increasing sinuosity and permanence of flow which may have been partly temporally and partly spatially controlled. The predominance of coarse sediments is thought to be largely controlled by limited subsidence. The Lower Carboniferous transgression was the major overall control of alluviation.     

Architecture of a distal pre-vegetation braidplain: Cambrian middle member of the Wood Canyon Formation,southern Marble Mountains,California, USA

Architectural element analysis and detailed mapping of a 300 m along-strike exposure of the middle member Wood Canyon Formation, southern Marble Mountains, California, USA, provides new evidence for extensive braided–fluvial channel-belt deposits with adjacent overbank environments. Three-dimensional models constructed using ‘Structure from Motion’ techniques, combined with field-based observations, allowed interpretation of outcrop-scale trends, barforms, channel fills and fine-scale features. The ca 80 m thick member is divisible into five distinct units, including units M1 to M3 that form the bulk of the stratigraphy. Units are defined by stacking patterns of three facies associations (Facies Association 1 to Facies Association 3), each representing the product of a subenvironment within the fluvial system. In Facies Association 1, stacked cosets, interpreted as low-relief fluvial bars and channel fills, preserve vertical-accretion and downstream-accretion elements under unimodal north-north-west palaeoflow, with minor lateral accretion near bar edges. Deposits of Facies Association 2 to Facies Association 3, linked to overbank environments, are found only in unit M2, in the middle 27 m of the middle member. Floodplains, represented by Facies Association 2, include crumbly red-orange intervals of fine to medium-grained sandstone and thinner sets of cross-bedding than Facies Association 1, interbedded with thicker cross-stratification indicative of overbank splay or overland flow aggradation from adjacent channel belts during flood stage. Possible aeolian beds of Facies Association 3 preserve broad festooned trough cross-strata that average 23 cm in thickness; their small size, medium-grained sandstone and iron oxide cement suggest a high water table. The diverse assemblage of interpreted subenvironments, paired with bedform and facies patterns, implies a perennial fluvial system that gradually built large sand bars as the channel belt migrated and avulsed across an unconfined braided–fluvial reach, leaving the overbank area on its flanks subject to weathering and aeolian transport. Despite the occurrence of strata deposited in low-energy and ponded settings, and a marine influence proposed for nearby sections of middle member, no ichnofossils were encountered.     

Lithofacies attributes, depositional system and diagenetic properties of the Permian Gharif Formation from Haushi–Huqf area, Central Oman

Over 70 m thick interbedded sandstone, siltstone and claystone of the upper member of the Gharif Formation are exposed in western Huqf area in Oman Interior Sedimentary Basin. The Gharif Formation, particularly its upper member hosts major hydrocarbon reservoir in the subsurface of the Oman Interior Sedimentary Basin. The upper member of the Gharif Formation is comprised of interbedded thick sandstone, siltstone, carbonaceous clays and intraformational conglomerates. The sandstone lithofacies, on average, constitute 10 m thick multistoreyed sequences, which are composed internally of 2–3 m thick and 100 s of metres across vertically and laterally amalgamated sandstone bodies. Two major types of sandstones (types 1 and 2) are identified on the basis of their lithofacies association and internal architecture. The type 1 sandstone constitutes the lower part of the member and is comprised of pebbly to coarse-grained, planar and trough cross-bedded sandstone, plane bedded sandstone and pebble lags at the base of major sandstone bodies. The cross-beds are, on average, 30 cm thick exhibiting a dominant paleoflow direction towards NW (280–300° N). It is interpreted to be deposited by low sinuosity braided streams. The type 2 sandstone constitutes the upper part of the member and is comprised of medium-grained sandstone, trough to low angle plane bedding associated with lateral accretion surfaces. It is commonly interbedded with carbonaceous clays. Silicified plant fragments are commonly distributed in the upper part of the sandstone. Interbedded clays and siltstones are red, mottled and extensively bioturbated due to root burrows. It is interpreted to be deposited by high sinuosity meandering streams. In the uppermost part of the section, several dark grey to black carbonaceous clay/coal beds with plant matter are interbedded with sandstone and red clay indicating development of swampy conditions during onset of the coastal setting in the uppermost part of the formation. About 30 cm thick bioclastic sandstone deposited by the marine coastal bars mark transition from the Gharif Formation to carbonate dominated Khuff Formation. The sandstone of the Gharif Formation is arkosic in composition. Very small amount of cement and negligible compaction of constituent grains in sandstone indicates shallow burial before uplift.     

东非鲁武马盆地始新统超深水重力流砂岩储层特征及成因

鲁武马盆地古近系-新近系发育多套超深水、超大型、富含天然气藏的重力流沉积砂体。以始新统砂体为解剖对象,分析区内重力流砂岩储层特征及成因。结果表明砂体以巨厚层状产出于深海泥岩内部,并与周围泥岩截然接触,测井曲线表现出宏观均一性;岩心揭示此类巨厚砂体是由多期单砂体叠置而成,单砂体是由底部高密度颗粒流和顶部低密度浊流两部分组成,且经历过强底流改造。鲁武马河流三角洲强大物源供给决定了区内砂体分布面积和体积规模;深海滑塌、块体搬运等重力流沉积过程控制了沉积体粒序构造和内部结构;海底区域性强底流持续冲刷并携带走单砂体顶部细粒沉积物,残留了底部“干净”的中粗粒砂岩;多期沉积事件和频繁水道迁移决定了砂体纵、横向叠加展布,并最终形成了区内厚度巨大、岩性宏观均一且连通性极好的超大型深水重力流沉积砂岩储层。