Magnetocentrifugal launching of jets from discs around Kerr black holes

Strong magnetic fields modify particle motion in the curved space–time of spinning black holes and change the stability conditions of circular orbits. We study conditions for magnetocentrifugal jet launching from accretion discs around black holes, whereby large-scale black hole lines anchored in the disc may fling tenuous coronal gas outwards. For a Schwarzschild black hole, magnetocentrifugal launching requires that the poloidal component of magnetic fields makes an angle less than  60°  to the outward direction at the disc surface, similar to the Newtonian case. For prograde rotating discs around Kerr black holes, this angle increases and becomes  90°  for footpoints anchored to the disc near the horizon of a critically spinning   a = M   black hole. Thus, a disc around a critically spinning black hole may centrifugally launch a jet even along the rotation axis.     

A model of magnetically induced disc–corona for black hole binaries

We propose a model of magnetic connection (MC) of a black hole with its surrounding accretion disc based on large-scale magnetic field. The MC gives rise to transport of energy and angular momentum between the black hole and the disc, and the closed field lines pipe the hot matter evaporated from the disc, and shape it in the corona above the disc to form a magnetically induced disc–corona system, in which the corona has the same configuration as the large-scale magnetic field. We numerically solve the dynamic equations in the context of the Kerr metric, in which the large-scale magnetic field is determined by dynamo process and equipartition between magnetic pressure and gas pressure. Thus we can obtain a global solution rather than assuming the distribution of large-scale magnetic field beforehand. The main MC effects lie in three aspects. (1) The rotational energy of a fast-spinning black hole can be extracted, enhancing the dissipation in the accretion disc, (2) the closed field lines provide a natural channel for corona matter escaping from disc and finally falling into black hole and (3) the scope of the corona can be bounded by the conservation of magnetic flux. We simulate the high-energy spectra of this system by using Monte Carlo method, and find that the relative hardness of the spectra decreases as accretion rate or black hole spin a _* increases. We fit the typical X-ray spectra of three black hole binaries  (GRO J1655−40, XTE 1118+480 and GX 339−4)  in the low/hard or very high state.     

The jet power extracted from a magnetized accretion disc

We consider the power of a relativistic jet accelerated by the magnetic field of an accretion disc. It is found that the power extracted from the disc is mainly determined by the field strength and configuration of the field far from the disc. Comparing it with the power extracted from a rotating black hole, we find that the jet power extracted from a disc can dominate over that from the rotating black hole. However, in some cases, the jet power extracted from a rapidly rotating hole can be more important than that from the disc, even if the poloidal field threading the hole is not significantly larger than that threading the inner edge of the disc. The results imply that the radio-loudness of quasars may be governed by its accretion rate, which might be regulated by the central black hole mass. It is proposed that the different disc field generation mechanisms might be tested against observations of radio-loud quasars if their black hole masses are available.     

Iron line profiles and self-shadowing from relativistic thick accretion discs

We present Fe Kα line profiles from and images of relativistic discs with finite thickness around a rotating black hole using a novel code. The line is thought to be produced by iron fluorescence of a relatively cold X-ray-illuminated material in the innermost parts of the accretion disc and provides an excellent diagnostic of accretion flows in the vicinity of black holes. Previous studies have concentrated on the case of a thin, Keplerian accretion disc. This disc must become thicker and sub-Keplerian with increasing accretion rates. These can affect the line profiles and in turn can influence the estimation of the accretion disc and black hole parameters from the observed line profiles. We here embark on, for the first time, a fully relativistic computation which offers key insights into the effects of geometrical thickness and the sub-Keplerian orbital velocity on the line profiles. We include all relativistic effects such as frame-dragging, Doppler boost, time dilation, gravitational redshift and light bending. We find that the separation and the relative height between the blue and red peaks of the line profile diminish as the thickness of the disc increases. This code is also well suited to produce accretion disc images. We calculate the redshift and flux images of the accretion disc and find that the observed image of the disc strongly depends on the inclination angle. The self-shadowing effect appears remarkable for a high inclination angle, and leads to the black hole shadow being in this case, completely hidden by the disc itself.     

Application of a relativistic accretion disc model to X-ray spectra of LMC X-1 and GRO J1655-40

We present a general relativistic accretion disc model and its application to the soft-state X-ray spectra of black hole binaries. The model assumes a flat, optically thick disc around a rotating Kerr black hole. The disc locally radiates away the dissipated energy as a blackbody. Special and general relativistic effects influencing photons emitted by the disc are taken into account. The emerging spectrum, as seen by a distant observer, is parametrized by the black hole mass and spin, the accretion rate, the disc inclination angle and the inner disc radius.
We fit the ASCA soft-state X-ray spectra of LMC X-1 and GRO J1655-40 by this model. We find that, having additional limits on the black hole mass and inclination angle from optical/UV observations, we can constrain the black hole spin from X-ray data. In LMC X-1 the constraint is weak, and we can only rule out the maximally rotating black hole. In GRO J1655-40 we can limit the spin much better, and we find 0.68 a 0.88 . Accretion discs in both sources are radiation-pressure dominated. We do not find Compton reflection features in the spectra of any of these objects.     

Alignment and precession of a black hole with a warped accretion disc

We consider the shape of an accretion disc whose outer regions are misaligned with the spin axis of a central black hole and calculate the steady state form of the warped disc in the case where the viscosity and surface densities are power laws in the distance from the central black hole. We discuss the shape of the resulting disc in both the frame of the black hole and that of the outer disc. We note that some parts of the disc and also any companion star maybe shadowed from the central regions by the warp. We compute the torque on the black hole caused by the Lense–Thirring precession, and hence compute the alignment and precession time-scales. We generalize the case with viscosity and hence surface density independent of radius to more realistic density distributions for which the surface density is a decreasing function of radius. We find that the alignment time-scale does not change greatly but the precession time-scale is more sensitive. We also determine the effect on this time-scale if we truncate the disc. For a given truncation radius, the time-scales are less affected for more sharply falling density distributions.     

Extreme gravitational lensing near rotating black holes

We describe a new approach to calculating photon trajectories and gravitational lensing effects in the strong gravitational field of the Kerr black hole. These techniques are applied to explore both the imaging and spectral properties of photons emitted from an accretion disc, which perform multiple orbits of the central mass before escaping to infinity. Viewed at large inclinations, these higher-order photons contribute ∼20 per cent of the total luminosity of the system for a Schwarzschild hole, while for an extreme Kerr black hole this fraction rises to ∼60 per cent. In more realistic models, these photons will be reabsorbed by the disc at large distances from the hole, but this returning radiation could provide a physical mechanism to resolve the discrepancy between the predicted and observed optical/ultraviolet colours in active galactic nuclei. Conversely, at low inclinations, higher-order images reintercept the disc plane close to the black hole, so need not be absorbed by the disc if this is within the plunging region. These photons form a bright ring carrying approximately 10 per cent of the total disc luminosity for a Schwarzschild black hole. The spatial separation between the inner edge of the disc and the ring is similar to the size of the event horizon. This is resolvable for supermassive black holes with proposed X-ray interferometery missions such as the Microarcsecond X-ray Imaging Mission (MAXIM), and so has the potential to provide an observational test of strong field gravity.     

X‐ray spectra and polarization from accreting black holes: polarization from an orbiting spot

The polarization from a spot orbiting around Schwarzschild and extreme Kerr black holes is studied. We assume different models of local polarization. Firstly, as a toy model we set the local polarization vector either normal to the disc plane, or perpendicular to the toroidal magnetic field. Then we examine the more realistic situation with a spot arising due to the emission from the primary source above the disc. We employ either Rayleigh single scattering or Compton multiple scattering approximations. The time dependence of the degree and angle of polarization during the spot revolution is examined as a function of the observer's inclination angle and black hole angular momentum. The gravitational and Doppler shifts, lensing effect as well as time delays are taken into account. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Reflected iron line from a source above a Kerr black hole accretion disc

In this paper we present a fully relativistic approach to modelling both the continuum emission and the reflected fluorescent iron line from a primary X-ray source near a Kerr black hole. The X-ray source is located above an accretion disc orbiting around the black hole. The source is assumed to be a static point source located on an arbitrary position above the disc, on or off the axis of rotation. We carry out Monte Carlo simulations in order to estimate the iron line spectrum as well as its equivalent width. Because of the gravitational lensing effect, an enhancement of the iron line is expected when the primary source is located close to the central black hole. We find that for a source located on the axis of rotation the enhancement is relatively modest. An observer at inclination 30° would measure an equivalent width of ∼300 eV in the extreme case of a maximally rotating black hole and a source located at height 1.5 gravitational radii from the centre. This corresponds to an equivalent width enhancement factor of about 2 compared with the classical value where no lensing effect comes into play. However, when allowing the source to be located off the axis of rotation, much stronger enhancement can be obtained. In the extreme case of a maximally rotating black hole and a source located just above the approaching side of the disc, an observer at inclination 30° could measure an equivalent width as high as ∼1.5 keV (i.e., ∼10 times the classical value). We also find that observers located at high inclination angles observe a stronger line than observers at low inclination angles.     

Is the Bardeen–Petterson effect responsible for the warping and precession in NGC 4258?

Strong evidence for the presence of a warped Keplerian accretion disc in NGC 4258 (M 106) has been inferred from the kinematics of water masers detected at subparsec scales. Assuming a power-law accretion disc and using constraints on the disc parameters derived from observational data, we have analysed the relativistic Bardeen–Petterson effect driven by a Kerr black hole as the potential physical mechanism responsible for the disc warping. We found that the Bardeen–Petterson radius is comparable to or smaller than the inner radius of the maser disc (independent of the allowed value for the black hole spin parameter). Numerical simulations for a wide range of physical conditions have shown that the evolution of a misaligned disc due to the Bardeen–Petterson torques usually produces an inner flat disc and a warped transition region with a smooth gradient in the tilt and twist angles. Since this structure is similar to that seen in NGC 4258, we propose that the Bardeen–Petterson effect may be responsible for the disc warping in this galaxy. We estimated the time-scale necessary for the disc inside of the Bardeen–Petterson radius to align with the black hole's equator, as a function of the black hole spin. Our results show that the Bardeen–Petterson effect can align the disc within a few billion years in the case of NGC 4258. Finally, we show that if the observed curvature of the outer anomalous arms in the galactic disc of NGC 4258 is associated with the precession of its radio jet/counterjet, then the Bardeen–Petterson effect can provide the required precession period.     

Models for jet power in elliptical galaxies: a case for rapidly spinning black holes

The power of jets from black holes is expected to depend on both the spin of the black hole and the structure of the accretion disc in the region of the last stable orbit. We investigate these dependencies using two different physical models for the jet power: the classical Blandford–Znajek (BZ) model and a hybrid model developed by Meier. In the BZ case, the jets are powered by magnetic fields directly threading the spinning black hole while in the hybrid model, the jet energy is extracted from both the accretion disc as well as the black hole via magnetic fields anchored to the accretion flow inside and outside the hole's ergosphere. The hybrid model takes advantage of the strengths of both the Blandford–Payne and BZ mechanisms, while avoiding the more controversial features of the latter. We develop these models more fully to account for general relativistic effects and to focus on advection-dominated accretion flows (ADAFs) for which the jet power is expected to be a significant fraction of the accreted rest mass energy.
We apply the models to elliptical galaxies, in order to see if these models can explain the observed correlation between the Bondi accretion rates and the total jet powers. For typical values of the disc viscosity parameter  α∼ 0.04 –0.3  and mass accretion rates consistent with ADAF model expectations, we find that the observed correlation requires   j ≳ 0.9  ; that is, it implies that the black holes are rapidly spinning. Our results suggest that the central black holes in the cores of clusters of galaxies must be rapidly rotating in order to drive jets powerful enough to heat the intracluster medium and quench cooling flows.     

Gravitational wave emission from a companion black hole in the presence of an accretion disc around a super-massive Kerr black hole

Gravitational wave signal characteristics from a binary black hole system in which the companion moves through the accretion disc of the primary are studied. We chose the primary to be a super-massive  ( M = 10⁸ M_⊙)  Kerr black hole and the companion to be a massive black hole  ( M = 10⁵ M_⊙)  to clearly demonstrate the effects. We show that the drag exerted on the companion by the disc is sufficient to reduce the coalescence time of the binary. The drag is primarily due to the fact that the accretion disc on a black hole deviates from a Keplerian disc and becomes sub-Keplerian due to inner boundary condition on the black hole horizon. We consider two types of accretion rates on to the companion. The companion is deeply immersed inside the disc and it can accrete at the Bondi rate which depends on the instantaneous density of the disc. However, an accretion disc can also form around the smaller black hole and it can accrete at its Eddington rate. Thus, this case is also studied and the results are compared. We find that the effect of the disc will be significant in reducing the coalescence time and one needs to incorporate this while interpreting gravitational wave signals emitted from such a binary system.     

Gravitationless black holes

A gravitationless black hole model is proposed in accord with a five-dimensional fully covariant Kaluza-Klein (K-K) theory with a scalar field, which unifies the four-dimensional Einsteinian general theory of relativity and Maxwellian electromagnetic theory. It is shown that a dense compact core of a star, when it collapses to a critical density, suddenly turns off or shields its gravitational field. The core, if its mass exceeds an upper limit, directly collapses into a black hole. Otherwise, the extremely large pressure, as the gravity is turned off, immediately stops the collapse and drives the mantle material of supernova moving outward, which leads to an impulsive explosion and forms a neutron star as a remnant. A neutron star can further evolve into a black hole when it accretes enough matter from a companion star such that the total mass exceeds a lower limit. The black hole in the K-K theory is gravitationless at the surface because the scalar field is infinitely strong, which varies the equivalent gravitational constant to zero. In general, a star, at the end of its evolution, is relatively harder to collapse into a gravitationless K-K black hole than a strong gravitational Schwarzschild black hole. This is consistent with the observation of some very massive stars to form neutron stars rather than expected black holes. In addition, the gravitationless K-K black hole should be easier to generate jets than a Schwarzschild black hole.     

Smoothed particle hydrodynamic simulations of viscous accretion discs around black holes

Viscous Keplerian discs become sub-Keplerian close to a black hole since they pass through sonic points before entering into it. We study the time evolution of polytropic viscous accretion discs (both in one- and two-dimensional flows) using smoothed particle hydrodynamics. We discover that for a large region of the parameter space spanned by energy, angular momentum and polytropic index, when the flow viscosity parameter is less than a critical value, standing shock waves are formed. If the viscosity is very high then the shock wave disappears. In the intermediate viscosity, the disc oscillates very significantly in the viscous time-scale. Our simulations indicate that these centrifugally supported high density regions close to a black hole play an active role in the flow dynamics, and consequently, the radiation dynamics.     

Radiation spectrum of a magnetized supercritical accretion disc with thermal conduction

we examine the effect of thermal conduction on the observational properties of a super critical hot magnetized flow. We obtained self-similar solution of a magnetized disc when the thermal conduction plays an important role. Follow of our first paper (Ghasemnezhad et al. in Astrophys. J. 750, 2012 (hereafter GKA12)) we have extended our solution on the observational appearance of the disc to show how physical condition such as thermal conduction, viscosity, and advection will change the observed luminosity of the disc, Continuous spectra and surface temperature of such discs was plotted. We apply the present model to black-hole X-ray binary LMC X-3 and narrow-line seyfert 1 galaxies, which are supposed to be under critical accretion rate. Our results show clearly that the surface temperature is strongly depends on the thermal conduction, the magnetic field and advection parameter. However we see that thermal conduction acts to oppose the temperature gradient as we expect and observed luminosity of the disc will reduce when thermal conduction is high. We have shown that in this model the spectra of critical accretion flows strongly depends on the inclination angle.     

Small-scale inviscid accretion discs around black holes

Gas falling quasi-spherically on to a black hole forms an inner accretion disc if its specific angular momentum l exceeds l ∗∼ r _g c , where r _g is the Schwarzschild radius. The standard disc model assumes l ≫ l ∗. We argue that, in many black hole sources, accretion flows have angular momenta just above the threshold for disc formation, l ≳ l ∗, and assess the accretion mechanism in this regime. In a range l ∗< l < l _cr, a small-scale disc forms in which gas spirals fast into the black hole without any help from horizontal viscous stresses. Such an 'inviscid' disc, however, interacts inelastically with the feeding infall. The disc–infall interaction determines the dynamics and luminosity of the accretion flow. The inviscid disc radius can be as large as 14 r _g, and the energy release peaks at 2 r _g. The disc emits a Comptonized X-ray spectrum with a break at ∼100 keV. This accretion regime is likely to take place in wind-fed X-ray binaries and is also possible in active galactic nuclei.     

Three-Dimensional Geometry of Planar Magnetic Structure in the Corona

The coronal magnetic field (CMF) during Carrington rotation 1870 is inferred by using the so-called 'potential model' with the photospheric magnetic field observed at Kitt Peak. Magnetic field lines starting at areas restricted (90deg; ± 30deg; in longitude and 0deg; ± 20deg; in latitude) in both the photosphere and the source surface of 2.5 solar radii are traced to examine fine geometrical structures of the CMF. We found a well-ordered planar magnetic structure (PMS) near 90° Carrington longitude in the corona. The PMS consists of magnetic flux of negative polarity emanating from several small areas in the photosphere. The magnetic flux expands into a wide longitudinal angle in the source surface making a planar magnetic structure.     

Mass loss from the inner regions of accretion discs due to centrifugally driven magnetic wind flows

Wind flows and collimated jets are believed to be a feature of a range of disc accreting systems. These include active galactic nuclei, T Tauri stars, X-ray binaries and cataclysmic variables. The observed collimation implies large-scale magnetic fields and it is known that dipole-symmetry fields of sufficient strength can channel wind flows emanating from the surfaces of a disc. The disc inflow leads to the bending of the poloidal magnetic field lines, and centrifugally driven magnetic winds can be launched when the bending exceeds a critical value. Such winds can result in angular momentum transport at least as effective as turbulent viscosity, and hence they can play a major part in driving the disc inflow.
It is shown here that if the standard boundary condition of vanishing viscous stress close to the stellar surface is applied, together with the standard connection between viscosity and magnetic diffusivity, then poloidal magnetic field bending increases as the star is approached with a corresponding increase in the wind mass loss rate. A significant amount of material can be lost from the system via the enhanced wind from a narrow region close to the stellar surface. This occurs for a Keplerian angular velocity distribution and for a modified form of angular velocity, which allows for matching of the disc and stellar rotation rates through a boundary layer above the stellar surface. The enhanced mass loss is significantly affected by the behaviour of the disc angular velocity as the stellar surface is approached, and hence by the stellar rotation rate. Such a mechanism may be related to the production of jets from the inner regions of disc accreting systems.     

The onset of General Relativity: gravitationally redshifted emission lines

We study and quantify gravitational redshift by means of relativistic ray tracing simulations of emission lines. The emitter model is based on thin, Keplerian rotating rings in the equatorial plane of a rotating black hole. Emission lines are characterised by a generalized fully relativistic Doppler factor or redshift associated with the line core. Two modes of gravitational redshift, shift and distortion, become stronger with the emitting region closer to the Kerr black hole. Shifts of the line cores reveal an effect at levels of 0.0015 to 60% at gravitational radii ranging from 10⁵ to 2. The corresponding Doppler factors range from 0.999985 to 0.4048. Line shape distortion by strong gravity, i.e. very skewed and asymmetric lines occur at radii smaller than roughly ten gravitational radii. Gravitational redshift decreases with distance to the black hole but remains finite due to the asymptotical flatness of black hole space–time. The onset of gravitational redshift can be tested observationally with sufficient spectral resolution. Assuming a resolving power of ∼100000, yielding a resolution of ≈0.1 Å for optical and near‐infrared broad emission lines, the gravitational redshift can be probed out to approximately 75000 gravitational radii. In general, gravitational redshift is an indicator of black hole mass and spin as well as for the inclination angle of the emitter, e.g. an accretion disk. We suggest to do multi‐wavelength observations because all redshifted features should point towards the same central mass. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Swirling hydrodynamic jets in viscous accretion flows

A study is made of axisymmetric, low sonic-Mach-number flows of a viscous fluid with angular momentum outside of a black-hole. The viscosity is an eddy viscosity due to turbulence in the sheared flows. Self-similar solutions arise naturally, reducing the Navier-Stokes equations to a set of nonlinear ordinary differential equations. These equations are solved analytically for flows of constant specific angular momentum and numerically for more general flows. For flows with non-constant specific angular momentum, the momentum flux density includes a planar discontinuity which is interpreted as an accretion disc. In general, two flow regions appear on each side of the disk, corresponding to accretion onto the disk and jet-like outflows along the ±z-axes. Physical interpretations of the solutions show that these flows arise in response to point sources of axial momentum at the origin directed in the ±z-directions. The power needed to maintain this momentum input is assumed to come from the mass accretion onto the black hole.The hydrodynamic flows are generalized to include a magnetic field. In the limit of infinite electrical conductivity, the possible types of flow patterns are the same as in hydrodynamic case. The magnetic field alters the relative amounts of reversible and irreversible momentum and angular momentum transport by the flow. For a flow with turbulent viscosity, the magnetic field acts to reduce the level of the turbulence and the effective value of the eddy viscosity.