深水海底管道屈曲传播试验设计

针对深水海底管道屈曲传播的研究需要,文中结合国外的相关研究成果,以天津大学现有深海压力舱试验装置为基础,并以DNV规范和ANSYS有限元数值模拟计算结果为依据,设计了深水海底管道屈曲传播试验方案.该试验方案选取径厚比在25～30范围内的小直径管件进行试验,为管道屈曲传播理论研究提供指导,并可作为深水管道止屈器试验设计的...     

深水压力舱海底管道屈曲试验进度优化研究

天津大学深水压力舱的建设对于深水结构屈曲等研究提供了很大的便利,通过试验研究深水海底管道屈曲,由于试验的复杂性和特殊性,试验过程没有现成的经验,实验室开始试验耗费很大的人力物力,试验过程很容易出现误工现象,因此有必要对试验的进度进行调整优化.利用Project软件对试验进度进行安排,并给出合理的建议和实施措施,对于以后...     

海底埋设高温管道隆起屈曲数值模拟研究

高温是引发海底管道整体屈曲失效的主要因素,而海床上存在的局部隆起使得高温埋设管道更加容易发生隆起屈曲。这里重点研究海底埋设高温管道发生隆起屈曲的临界温度载荷及其影响因素,提出了一种简化的数值模拟分析模型,同已有的相关实验结果比较表明,本方法可以较好地近似计算高温管道的隆起屈曲。基于本方法开展的参数分析,得到了管道覆土高度、混凝土配重层厚度、海床不平整对海底高温管道发生隆起屈曲的影响趋势。     

不同径厚比的海底管道压溃屈曲研究

为了探索不同径厚比海底管道的压溃屈曲特性,本文分别采用挪威船级社（Det Norske Veritas,DNV）规范、有限元模拟和深海压力舱模型试验,研究不同径厚比海底管道承载外部水压的能力,并就DNV规范压溃屈曲计算公式对不同径厚比管道的适用性进行了讨论,优化了小径厚比海底管道压溃屈曲的设计方法。研究表明：小径厚比管道的压溃屈曲临界压力对管道径厚比的变化更敏感;DNV规范计算小径厚比管道的压溃屈曲临界压力偏小,在进行深海管道的压溃屈曲设计时,建议采用模型试验结合有限元模拟的方法,计算管道实际可提供的压溃屈曲承载力。     

初始几何缺陷对UOE焊管屈曲压溃影响研究

UOE焊管经过一系列成型工艺可以得到高质量的成型结果,但管道截面仍存在一定初始几何缺陷,这将对管道性能产生明显影响。通过试验测定X65钢在循环载荷下的力学性能,并利用有限元分析软件对UOE焊管成型全过程进行模拟,分析主要成型参数对管道屈曲压溃压力的影响。分别采用有限元模拟和试验测量方法确定管道截面初始几何缺陷分布情况,并采用余弦函数形式拟合几何缺陷。结果表明,扩径阶段芯轴数目将对缺陷形式产生影响,且实际厚壁UOE管道几何缺陷形式更接近梨形而非椭圆形。评估厚壁UOE管道性能时,近似认为截面形式为椭圆形可能发生过于保守的问题。     

深海管道非线性屈曲理论计算方法

针对深海管道在侧向静水压条件下发生局部屈曲压溃的情况,研究了关于管道前屈曲阶段变形响应和压溃压力的计算方法。假定管道前屈曲阶段发生沿轴向均匀一致的椭圆度变形,建立基于圆环的力学模型,考虑几何大变形和材料的弹塑性本构关系,利用虚功原理建立平衡方程。通过选用合适的位移离散函数对方程组数值离散,并利用牛顿法进行数值求解,得到含椭圆度缺陷的管道截面的变形响应和压溃压力。通过试验、有限元分析和规范对理论计算结果进行了对比验证,证明该方法精度可靠,与事实吻合。最后,计算了初始椭圆度缺陷对不同径厚比管道的压溃压力的影响。     

深水压力舱密封技术研究

管道屈曲技术试验过程当中,发现深水压力舱的出厂自带密封工艺耗时过长、密封效果不好、安全性不佳、返工现象普遍.针对这一现象,采用全新的密封工艺流程与方法:在前期处理中对螺柱编号与清理以防止螺母安装过程中的卡死现象;采用自创的精度控制方法防止漏水以及返工;根据不同的工作压力对密封技术进行梯度划分,选取不同的密封方案.经过实...     

管道纵向塑性弯曲对屈曲传播压力的影响

本文采用一个塑性环—梁模型来模拟海底管道在屈曲传播过程中的纵向过渡段,利用能量原理,借助一些计算技巧,导出了屈曲传播压力.过渡段长度以及塑性铰位置参数之间的非线性关系。最后通过迭代技术求得了屈曲传播压力和过渡段的长度。由于考虑了纵向过渡段塑性弯曲的影响,作者提出的模型较以往的环模型更加符合实际。文中对不锈钢和铝两种材料的管道,以及不同的几何尺寸,分别进行了计算,所得的结果比以往文献中所得的预测值更接近实验曲线。     

深水S型铺管中残余变形对屈曲压力的影响

随着S型海管铺设逐步走向深水,管道在铺设过程中承受的荷载增加,发生一定程度的塑性变形。本文讨论S型铺设引起的残余塑性变形对管道屈曲承载能力的影响。首先基于壳单元建立"管道-托辊"相互作用的局部有限元模型,分析了管道在铺设过程中的受力状态,获得了管道的残余塑性变形。然后以该残余变形作为管道非线性屈曲分析的初始缺陷,基于改进的RIKS方法计算了管道的临界屈曲压力。研究结果表明,铺设残余塑性变形在一定程度上削弱管道的承载能力,在深水铺设中应予以考虑。     

椭圆度-凹坑双缺陷海底管道局部屈曲特性研究

海底管道在制造、埋设以及使用过程中极易产生椭圆度-凹坑双缺陷,双缺陷影响管道局部屈曲,对含椭圆度-凹坑双缺陷海底管道的局部屈曲特性研究十分必要。现行规范中采用等效椭圆度对含椭圆度-凹坑海底管道进行评估,该方法无法准确评估不同缺陷形式的屈曲特性。采用形状系数对含椭圆度-凹坑双缺陷的海底管道进行评估,运用有限元软件ABAQUS进行数值模拟,并进行试验验证。在此基础上对含有不同凹坑深度、不同椭圆度的海底管道进行局部屈曲的数值模拟,计算不同形状椭圆度、含有不同凹坑深度海底管道的形状系数,对其进行敏感性分析。计算结果表明:形状系数对海底管道椭圆度、凹坑深度、径厚比敏感性较强;对凹坑宽度敏感性较弱。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.     

Flow Cytometric Analysis of Coastal Lagoon Bacterioplankton and Picophytoplankton: Fixation and Storage Effects

The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.