2003年度地理学基金项目评审及成果分析

介绍了国家自然科学基金2003年度地理学项目受理、评审与资助的总体情况；分析了 2003年在研的地理学基金项目执行情况，着重剖析了2000年批准项目的成果产出数量与水平；阐述了2002年底结题的地理学基金项目取得的突出进展。     

2004年度地理学基金项目评审及成果分析

介绍了国家自然科学基金2004年地理学项目受理、评审与资助的总体情况；分析了2004年在研的地理学基金项目执行情况，着重剖析了2001年批准项目的成果产出数量与水平；阐述了 2003年底结题的地理学基金项目取得的突出进展。     

2005年度地理学基金项目评审及成果分析

介绍了国家自然科学基金2005年度地理学项目受理、评审与资助的总体情况;分析了2005年在研的地理学基金项目执行情况,着重剖析了2002年批准项目的成果产出数量与水平;阐述了2004年底结题的地理学基金项目取得的突出进展。     

2012年度地理学基金项目评审与成果分析

着重分析2012年度面上项目、青年基金项目、地区基金项目及青年科学基金—面上项目连续资助项目的申请与资助情况,2011年度在研及结题项目的进展情况,申请过程及结题报告中暴露的问题;介绍了2011—2012年地理学学科"研究方向"、"关键词"编制及试用情况。     

2011年度地理学基金项目评审与成果分析

着重分析2011年度面上项目、青年基金项目及地区基金项目的申请与资助情况,2010年度在研及结题项目的进展情况,以及2012年度地理学基金管理将重点关注的问题。     

2002年国家自然科学基金(地球科学部分)批准项目摘登

<正> 《地球科学进展》2003年(18卷)第1期刊登了“2002年国家自然科学基金批准项目一览表(地球科学部分)”,总计696项。其中自由申请项目446项(批准号:4027),青年基金项目154项(批准号:4020),地区基金项目16项;重点项目60项(批准号:4023),西部计划项目20项。     

国家自然科学基金地球科学面上项目15年资助情况分析

根据国家自然科学基金委员会地球科学部1990—2004年基金项目年度统计资料,归纳总结了1990年以来15年期间地球科学领域面上基金项目的申请和资助数量与金额、项目平均申请与资助金额的变化规律;分析了自由申请项目以及青年基金项目和地区基金项目的资助规律;比较了地球科学领域分支学科申请和资助情况。分析表明：地球科学面上项目的资助数量不断上升,资助率多年平均为21.92%;资助强度年均增长14.15%,至2004年,项目平均资助强度已达30.03万元;各类面上项目中,以自由申请项目获资助数量最多,占资助总量的76%,其次为青年基金项目,地区基金项目所占比例最低,不足资助总量的4%;地球科学各学科面上项目申请和资助数量及金额均呈上升趋势,但具体资助情况互有差异,其中地理学和地质学申请和资助数量及金额占到所有面上项目总数的50%以上,但资助率却低于其他学科;各学科的项目平均资助强度每年增加幅度大约为1.80万元,在2000年之前,各学科的项目平均资助强度相差较少,但自2000年开始,地质学、地球物理学和地球化学成为高资助强度的3个学科。     

2019年度地理学基金项目评审与成果分析

2019年地理学科开始实施面向未来的申请代码资助体系。详细比较了新的资助体系的增改特征,以及由此带来的学科申请、受理方面的变化。在分析2019年地理学基金项目评审和资助的主要特点的基础上,总结了发现的主要问题并提出了改进建议。此外,对2018年底结题项目资助成果和代表性项目的结题成果进行了简要介绍。     

2009年度地理学基金项目评审及成果分析

着重分析了2009年面上项目、青年基金项目及地区基金项目的申请情况,2008年在研项目的进展情况,以及2008年底结题项目完成情况,同时介绍了2008年度主要学科方向取得的研究进展.     

2008年度地理学基金项目评审及成果分析

着重分析了2008年面上项目、青年基金项目及地区基金项目的申请情况及资助概况,2007年在研项目的进展情况,以及2007年底结题项目完成情况。同时介绍了2007年度主要学科方向取得的突出研究进展。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

Roles of xenomelts,xenoliths, xenocrysts,xenovolatiles, residues,and skarns in the genesis,transport, and localization of magmatic Fe-Ni-Cu-PGE sulfides and chromite

Most sulfide-rich magmatic Ni-Cu-(PGE) deposits form in dynamic magmatic systems by partial melting S-bearing wall rocks with variable degrees of assimilation of miscible silicate and volatile components, and generation of barren to weakly-mineralized immiscible Fe sulfide xenomelts into which Ni-Cu-Co-PGE partition from the magma. Some exceptionally-thick magmatic Cr deposits may form by partial melting oxide-bearing wall rocks with variable degrees of assimilation of the miscible silicate and volatile components, and generation of barren Fe ± Ti oxide xenocrysts into which Cr-Mg-V ± Ti partition from the magma. The products of these processes are variably preserved as skarns, residues, xenoliths, xenocrysts, xenomelts, and xenovolatiles, which play important to critical roles in ore genesis, transport, localization, and/or modification. Incorporation of barren xenoliths/autoliths may induce small amounts of sulfide/chromite to segregate, but incorporation of sulfide xenomelts or oxide xenocrysts with dynamic upgrading of metal tenors (PGE > Cu > Ni > Co and Cr > V > Ti, respectively) is required to make significant ore deposits. Silicate xenomelts are only rarely preserved, but will be variably depleted in chalcophile and ferrous metals. Less dense felsic xenoliths may aid upward sulfide transport by increasing the effective viscosity and decreasing the bulk density of the magma. Denser mafic or metamorphosed xenoliths may also increase the effective viscosity of the magma, but may aid downward sulfide transport by increasing the bulk density of the magma. Sulfide wets olivine, so olivine xenocrysts may act as filter beds to collect advected finely dispersed sulfide droplets, but other silicates and xenoliths may not be wetted by sulfides. Xenovolatiles may retard settling of – or in some cases float – dense sulfide droplets. Reactions of sulfide melts with felsic country rocks may generate Fe-rich skarns that may allow sulfide melts to fractionate to more extreme Cu-Ni-rich compositions. Xenoliths, xenocrysts, xenomelts, and xenovolatiles are more likely to be preserved in cooler basaltic magmas than in hotter komatiitic magmas, and are more likely to be preserved in less dynamic (less turbulent) systems/domain/phases than in more dynamic (more turbulent) systems/domains/phases. Massive to semi-massive Ni-Cu-PGE and Cr mineralization and xenoliths are often localized within footwall embayments, dilations/jogs in dikes, throats of magma conduits, and the horizontal segments of dike-chonolith and dike-sill complexes, which represent fluid dynamic traps for both ascending and descending sulfides/oxides. If skarns, residues, xenoliths, xenocrysts, xenomelts, and/or xenovolatiles are present, they provide important constraints on ore genesis and they are valuable exploration indicators, but they must be included in elemental and isotopic mass balance calculations.     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).     

Petrographic, mineralogy, and geochemistry of coals of Pabedana, Kerman Province, Central Iran

This paper discusses the result of the detailed investigations carried out on the coal characteristics, including coal petrography and its geochemistry of the Pabedana region. A total of 16 samples were collected from four coal seams d2, d4, d5, and d6 of the Pabedana underground mine which is located in the central part of the Central-East Iranian Microcontinent. These samples were reduced to four samples through composite sampling of each seam and were analyzed for their petrographic, mineralogical, and geochemical compositions. Proximate analysis data of the Pabedana coals indicate no major variations in the moisture, ash, volatile matter, and fixed carbon contents in the coals of different seams. Based on sulfur content, the Pabedana coals may be classified as low-sulfur coals. The low-sulfur contents in the Pabedana coal and relatively low proportion of pyritic sulfur suggest a possible fresh water environment during the deposition of the peat of the Pabedana coal. X-ray diffraction and petrographic analyses indicate the presence of pyrite in coal samples. The Pabedana coals have been classified as a high volatile, bituminous coal in accordance with the vitrinite reflectance values (58.75–74.32 %) and other rank parameters (carbon, calorific value, and volatile matter content). The maceral analysis and reflectance study suggest that the coals in all the four seams are of good quality with low maceral matter association. Mineralogical investigations indicate that the inorganic fraction in the Pabedana coal samples is dominated by carbonates; thus, constituting the major inorganic fraction of the coal samples. Illite, kaolinite, muscovite, quartz, feldspar, apatite, and hematite occur as minor or trace phases. The variation in major elements content is relatively narrow between different coal seams. Elements Sc,, Zr, Ga, Ge, La, As, W, Ce, Sb, Nb, Th, Pb, Se, Tl, Bi, Hg, Re, Li, Zn, Mo, and Ba show varying negative correlation with ash yield. These elements possibly have an organic affinity and may be present as primary biological concentrations either with tissues in living condition and/or through sorption and formation of organometallic compounds.     

电感耦合等离子体发射光谱法同时测定卤水中锂钠钾钙镁硼硫氯

建立了电感耦合等离子体发射光谱法(ICP-AES)同时测定碳酸盐型、硫酸盐型、氯化物型三种类型卤水中Li、Na、K、Ca、Mg、B、S、Cl等高低含量元素的分析方法。选择仪器最佳的工作条件为射频功率1400W,炬管位置位于-3,载气流量0.60 L/min。确定了各元素测定谱线,使用ICP-AES的双向观测模式、轴向观测模式测定Li、Ca、B、S、Cl以及低含量的K、Mg,径向观测模式测定高含量的Na、K、Mg,可确保卤水中不同含量的元素同时检出。Li、Na、K、Ca、Mg、B、S的检测下限为0.07～3.00 mg/L,Cl的测定下限为165mg/L。方法精密度(RSD,n=10)均小于5%,回收率为92.4%～109.7%。其中Na、K、Mg、S、Cl测定结果与传统方法测定结果基本吻合。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

Terrestrial geochemistry of Cd,Bi, Tl,Pb, Zn and Rb

About 2000 common magmatic, metamorphic and sedimentary rocks and rockforming minerals contained in 465 individual samples have been analyzed for 6 trace metals and potassium with high precision, mainly by combined distillation and AAS methods. Estimates of average abundances in the continental crust are: 98 ppb Cd. 82 ppb Bi. 490 ppb Tl, 14.8 ppm Pb, 77 ppm Zn and 98 ppm Rb (K/Rb: 223). These averages are close to the mean concentrations of the 6 elements in sedimentary and in low to medium grade metamorphic rocks. In relation to the upper mantle the earth's crust has very effectively accumulated Rb, Pb, Tl (and Bi). Cd and Zn are equally distributed between the upper and lower crust. Bi, Tl, Rb, Pb and K are accumulated in the upper relative to the lower continental crust by factors between 3.5 and 1.4. This is mainly due to higher concentrations in granites and lower abundances in granulites relative to gneisses and schists. The five metals form large ions with bulk coefficients less than one for the partition between metamorphic rocks and anatectic granitic melts. The major hosts of Rb, Tl, Pb and Bi in rocks are minerals with 8- to 12-coordinated sites such as mica, K-feldspar, plagioclase etc. (except for some preference of Bi for sphene and apatite). As examples of significant correlations those of Pb with Tl, K, Bi and Rb in mafic rocks and of Bi with K, Rb, Tl and Pb in sedimentary rocks can be reported. In granites and gneisses hydroxyl containing Fe²⁺-Mg-silicates are major host minerals for Zn and Cd. Except in some carbonate rocks Cd has no preference for Ca minerals.     

Occurrence,distribution, and composition of sulfide minerals,Boulder batholith,montana

Sulfide minerals in the Boulder batholith occur 1. as disseminated grains, visible in hand specimens; 2. in aplitic-pegmatitic pods and masses; 3. along joint and shear surfaces; 4. in hydrothermal veins; and 5. as minute masses within pyrite and silicate minerals and along intergranular sites. Hydrothermally altered rocks have an average sulfide content of 0.8 weight per cent, compared to an average of 0.01 per cent for unaltered rocks. Unaltered rock of the batholith may contain as much as 0.7 weight per cent sulfide. Sulfide inclusions in pyrite, the most abundant sulfide of the batholith, are common and represent a captured iss-phase which later changed to chalcopyrite plus pyrrhotite or mackinawite. Inclusions are most abundant, and more complex, in pyrites of hydrothermally altered and ore rocks. Electron-probe analyses show that pyrites of the Boulder batholith have very similar compositions to those found for pyrites from other ore deposits around the world.     

山东灵山岛滑塌体内部沉积及构造特征研究

青岛市灵山岛修船厂剖面下白垩统地层中发育良好的滑塌变形体。野外观察可见滑塌体岩性单元主要由厚层砂岩及砂页岩互层组成,其中厚层砂岩根据其沉积构造及成因机制可分为砂质碎屑流沉积及浊流沉积两类;砂页岩互层段砂岩层可见底模构造及粒序层理,为静水环境下远端浊流沉积。滑塌体内部构造主要可分为软褶皱变形、同生断层、透镜状砂质团块三种类型。其中,软褶皱变形根据岩性可分为砂岩软褶皱、砂页岩互层软褶皱及页岩软褶皱,随着变形强度增加,软褶皱枢纽逐渐平行于滑移方向,形成曲脊软褶皱或软鞘褶皱(soft sheath folds);同生断层出现在砂岩层中,根据力学性质分为正断层及逆断层,正断层为剪切拉伸所致,逆断层为软褶皱逆冲所致;透镜状砂质团块包括同沉积布丁构造和同沉积断块。根据滑塌体内部滑移面识别出三期滑塌,完整的滑塌体由底部拆离滑移面、下部厚层砂体、中部砂页岩互层及上部砂页岩互层未变形体组成,其组成特征及各部分接触关系反映了滑塌体中下部沿底部拆离滑移面发生滑塌变形,且于活动末期在相对静水条件下被上部砂页岩互层覆盖这一形成过程。根据滑塌体内部组成特征的有序性、相似性及滑塌体内部沉积构造特征,推测其触发机制可能为沉积物快速沉积所引发的重力滑塌成因。