胶东东部中生代逆冲推覆构造研究

研究区胶东东部位于华北东部苏鲁超高压变质带东端, 发育逆冲推覆构造. 采用多尺度构造研究和构造年代学研究相结合的方法, 可将胶东东部逆冲推覆体划分为石岛推覆体、荣成推覆体、米山推覆体、牟平推覆体等四个推覆体. 这些推覆体以相应的走滑逆冲型剪切带为底界, 主要活动于中生代. 研究表明, 由石岛剪切带、荣成剪切带至牟平剪切带, 古差异应力值和韧性变形强弱序列呈现逐渐降低的趋势, 与变形温度的变化趋势呈负相关. 根据逆冲推覆构造研究、⁴⁰Ar/³⁹Ar同位素测年数据以及前人在区域上的同位素构造年代学研究成果, 推测研究区中生代构造的发展主要经历了四期运动: 三叠纪末(约210~180 Ma)的逆冲推覆运动; 侏罗纪-早白垩世(约180~130 Ma)的伸展运动; 早白垩世(130~120 Ma)的走滑逆冲运动; 晚白垩世以后(约120 Ma~)的伸展运动. 其中, 早白垩世(130~120 Ma)的走滑逆冲运动期剪切带的活动序列为石岛剪切带→荣成剪切带→牟平剪切带→米山剪切带, 引起了推覆体的逆时针旋转效应. 胶东东部逆冲推覆构造与郯庐断裂带的两期走滑事件时代吻合、运动学相容, 可吸收或调节部分郯庐断裂带的走滑运动量, 从而导致该断裂带北段走滑量的显著变小.     

帕米尔北缘弧形推覆构造带东段的基本特征与现代地震活动

帕米尔北缘弧形推覆构造带东段由强烈活动的艾卡尔特弧形活动褶皱－逆断裂带与卡兹克阿尔特弧形活动褶皱－逆断裂带南、北两条巨型边缘弧形构造带及其间的推覆构造构成。每个弧形带分别由多个不同级别的、相对独立的次级弧形构造组成。每个弧形构造实际上就是一个独立的逆冲推覆席体，都有其各自独特的几何学、运动学、动力学特征，但同时又具有自相似性特征。独立地震破裂区或形变带与独立活动的弧形推覆构造可能具有一定的对应关系     

乌鲁木齐城市活断层发震构造模型初探

根据地表活断层资料、深地震反射剖面资料、石油地震剖面资料、流动地震观测和小震精确定位资料,通过与北天山山前典型发震构造的对比及逆断裂-褶皱与推覆构造的基本结构特征,初步建立了乌鲁木齐目标区发震构造模型。乌鲁木齐目标区可分为2个主要的地震构造,它们均是逆冲推覆构造。西侧为北天山山前逆冲推覆构造,由根部逆断裂、中部滑脱面和前缘挤压褶皱隆起带组成,根部逆断裂及前缘挤压褶皱带上发育全新世活断层,滑脱构造具有自南向北扩展的特点,未来的7级强震可能发生在根部断裂附近,而前缘挤压褶皱隆起构造,即西山隆起及其相伴生的西山断层和王家沟断层组、九家湾断层组,不具备发生大于6.5级地震的条件。东侧为博格达弧形推覆构造的西翼,其发震构造也由根部逆断层、中部滑脱层和前缘挤压褶皱隆起带组成,推覆构造具有自南向北扩展的特点。现今的推覆体前缘为阜康南断裂和古牧地背斜。该推覆构造带内部的雅玛里克断层、白杨南沟断层、碗窑沟断层和八钢-石化断裂,不是全新世活动断层,不具备发生大于6.5级地震的条件。     

西南天山柯坪逆冲推覆构造带的地壳缩短分析

柯坪逆冲推覆构造带是西南天山山前晚新生代以来形成的活动逆断裂-褶皱带,由5~6排近平行的弧形褶皱带组成,出露地层为寒武系—第四系。背斜形态多为复式箱状背斜和不对称的斜歪背斜,分别与断层弯曲背斜和断层扩展背斜的几何形态一致。地震勘探资料显示,各褶皱带前缘活动逆断裂在深部归并于统一的、由寒武系中的石膏层组成的滑脱面。滑脱面深度具有南浅北深、东浅西深的特点,皮羌断裂西侧滑脱面深度约为9km,东侧滑脱面深度为5km。在柯坪逆冲推覆构造中部的皮羌断裂东西两侧各5km和8km的位置,以断层弯曲褶皱和断层扩展褶皱构造模型为指导,用线长平衡的方法完成了2条长度分别为78km和73km的平衡地质剖面,恢复到变形前的形态后计算出这2条剖面上的地壳缩短量分别为40km和45km,缩短率为33%和37%。由于对柯坪逆冲推覆构造开始形成时间的证据较少,所以要计算长期的缩短速率是比较困难的。对比天山南麓库车活动逆断裂-褶皱带的形成时代,以及柯坪逆冲推覆构造与印干断裂的关系,认为柯坪逆冲推覆构造形成于第四纪早期的西域砾岩沉积阶段,按距今2.5Ma计算,柯坪逆冲推覆构造的地壳缩短速率是15.4~17.3mm/a     

帕米尔北缘弧形推覆构造带东段的基本特性与现代地震活动

帕米尔北缘弧形推覆构造带东段由强烈活动的艾卡尔特弧形活动褶皱－逆断裂带与卡兹克阿尔特征弧形活动褶皱－逆断裂带南，北两条巨型边缘形构造带及其间的推覆构造构成，每个弧形带分别由多个不同级别的，相对独立的次级弧形构造组成，每个弧形构造实际上就是一个独立的逆冲推断席体，都有其各自独特的几何学，运动学，动力学特征，但同时又具有相似性特征，独立地震破裂区或形变带与独立活动的弧形推覆构造可能具有一定的对应关系。     

新疆主要逆断层-褶皱构造区基本地震构造特征与潜在震源划分问题

本文介绍了新疆主要逆断层-褶皱构造区的基本特征,并对其潜在震源划分问题进行了初步的讨论。北天山山前推覆构造及乌鲁木齐以南的逆断裂-褶皱构造相对比较简单,由根部断裂、推覆体和前缘逆断裂-褶皱构造所组成;强地震的极震区或地震动的高值区可能位于推覆构造的根部断裂附近,而地震地表破裂和同震地表变形则位于山前逆断层-褶皱带内。南天山的柯坪推覆构造、库车推覆构造、帕米尔东北缘的弧形推覆构造,虽然也由多排逆断裂-褶皱构造带组成,但是其中的规模巨大、发育时间较长的逆断裂-背斜带,往往具备发生强震的条件。强震的极震区分布与地震地表断层位置比较一致,可作为强震的潜在震源。盆地内的新的盲逆断层-褶皱构造也具备发生6.5—7.0 级地震的能力,应作为震级上限为 7.0 级的潜在震源。由于对逆断层-褶皱构造的深浅构造关系及发震模型认识的不足,在潜在震源划分中应考虑这种不确定性。同时在潜在震源区划分中,还应考虑地震构造区的地震活动历史及构造活动性参数。     

新疆主要逆断层-褶皱构造区基本地震构造征与潜在震源划分问题

本文介绍了新疆主要逆断层-褶皱构造区的基本特征,并对其潜在震源划分问题进行了初步的讨论.北天山山前推覆构造及乌鲁木齐以南的逆断裂.褶皱构造相对比较简单,由根部断裂、推覆体和前缘逆断裂.褶皱构造所组成;强地震的极震区或地震动的高值区可能位于推覆构造的根部断裂附近,而地震地表破裂和同震地表变形则位于山前逆断层.褶皱带内.南天山的柯坪推覆构造、库车推覆构造、帕米尔东北缘的弧形推覆构造,虽然也由多排逆断裂.褶皱构造带组成,但是其中的规模巨大、发育时间较长的逆断裂.背斜带,往往具备发生强震的条件.强震的极震区分布与地震地表断层位置比较一致,可作为强震的潜在震源.盆地内的新的盲逆断层.褶皱构造也具备发生6.5-7.0级地震的能力,应作为震级上限为7.0级的潜在震源.由于对逆断层.褶皱构造的深浅构造关系及发震模型认识的不足,在潜在震源划分中应考虑这种不确定性.同时在潜在震源区划分中,还应考虑地震构造区的地震活动历史及构造活动性参数.     

活动推覆构造区潜在震源的边界和震级上限——以1902年阿图什8(1/4)级地震构造区为例

1902年阿图什81/4级地震发生在西南天山山前推覆构造体中,逆冲推覆构造由推覆体的根部断裂、推覆体、滑脱断层和前缘逆断裂-褶皱等组成,大地震的发震断裂往往是推覆构造的根部断裂,而地震地表破裂和同震褶皱隆起则位于山前逆断层-褶皱带内。高震级的潜在震源区(MU7.5)对应于低速的天山地块和高速的塔里木地块之间的根带断裂,其长度对应于推覆体根带断裂的长度,宽度对应于根带隐伏逆冲断裂在地表的投影宽度。推覆体前缘的每个活动逆断裂-背斜对应于一个潜在震源(MU≤7.5),其长度与活动逆断裂-背斜的长度相等,宽度应覆盖活动褶皱的两翼。潜在震源的矩震级上限由W-C统计关系式确定,其中发震断裂的面积为活动褶皱的长度与隐伏断坡宽度的乘积。     

勉略构造带康县区段磁组构特征及其构造意义

野外研究表明勉略构造带康县区段的两期主要构造变形特征:早期以较深层次的韧性变形为主,晚期为较浅层次的脆-韧性变形;表现为早期发育的紧闭褶皱、透入性面理,被晚期的褶皱以及脆性断层所截切、改造.磁组构主要反映晚期构造变形特征,样品磁化率各向异性度(PJ)总体较高,为强变形类型;T、E反映挤压、剪切为主的应变特征,与Flinn图解结果一致;两组磁面理均值为344°∠40°和179°∠61°,在平面上呈共轭状出露,锐角平分线近东西向,暗示了构造带内南北向挤压伴随着近东西向的走滑;磁线理倾角总体较小,近东西向展布;高角度磁面理以及占优势的低角度磁线理指示了挤压兼走滑的变形机制,部分高角度磁线理与逆冲作用有关.最小磁化率显示出晚期近南北向的应力方向.结合野外构造解析认为,晚期挤压兼右行走滑构造变形反映西秦岭逆冲推覆构造在碧口地块的阻挡下发生右行斜向逆冲,并暗示碧口地块相对向西逃逸.     

江西省万载县野猫冲铜矿控矿构造特征及找矿意义

江西省万载县野猫冲铜矿床为中低温热液（成矿流体）沿构造破碎带蚀变-蚀变岩型铜矿床。在地表地质调查、钻孔岩芯考察及岩矿鉴定的基础上,对野猫冲铜矿控矿构造进行详细研究,表明北东东向大型叠瓦状推（滑）覆构造控制矿区内各地质单元的延深与展布,北东向韧性剪切变形带控制矿区铜金矿体的展布,矿体呈似层状赋存于韧性剪切断裂之间的次级层间破碎带和小断裂带内,带内发育较强的动热变质,硅化、绢云母化和绿泥石化发育。矿石以黄铜矿为主,贫硫,成矿流体具有多期次的活动、叠加改造的特点。上栗-潭埠-宜丰断裂带自西至东已发现20余处铜多金属矿床（点）,显示该带具有巨大找矿潜力。     

Evolution of the ductile shear zone of the Paishanlou gold deposits,western Liaoning,China

The combination of field surveys with analysis of microstructure of tectonite and Electron Backscatter Diffraction (EBSD) on quartz fabric indicated that three periods of ductile shear events developed in the Paishanlou gold deposits and the E-W and NE-striking ductile shear zones were formed during each event. The E-W-striking ductile shear zone, accompanied by compressional and dextral shear slip, was shear-cut by the NE-striking shear zones, accompanied by compressional-sinistral shear slip and sinistral-normal shear slip, successively. An E-W-striking ductile shear zone developed at a deeper tectonic level and at middle- to high-temperatures, accompanied by abundant microstructures, including microlayering between a polycrystal quartz belt and mica, and quartz deformation was depended on cylinder (10-10) 〈a〉 or 〈c〉 glide. The development of an E-W-striking shear zone can be seen as a tectonic pattern in the region of the Paishanlou gold deposits of the collision between the Mongolian tectonic belt and the North Archean Craton from Suolun to the Linxi suture zone during the Indosinian. The NE-striking ductile shear zone developed approximately 160 Ma during the early Yianshanian at middle to shallow tectonic levels and at middle- to low-temperatures, accompanied by typical microstructures, including polycrystal quartz aggregation and quartz subgrain rotation recrystallization, etc., and quartz deformation was depended on prismatic (1011) 〈a〉 glide. The last ductile shear event around the NE-striking shear zone developed at low temperatures and shallow tectonic levels, yielding to a pre-existing NE-striking shear zone, accompanied by abundant microstructures, including low-temperature quartz grain boundary migration and bulging recrystallization. The last ductile shear movement may be related to lithosphere thinning and the destruction of the North China Craton from approximately 130-120 Ma, and this shear event resulted directly in the mineralization in the Paishanlou region.     

The pre-Cretaceous deep-seated tectonics of the Abukuma massif and its place in the structural framework of Japan

The structures and microstructures of the Takanuki and Hitachi areas in the Abukuma massif, Northeast Japan are described. In the Takanuki area, the basic Gosaisho series thrusts the pelitic Takanuki ones in a HP metamorphic context. The nappe structure is afterwards refolded by a migmatitic dome: the Samegawa dome, in a HT metamorphic context. Microtectonic analysis shows that the nappe was transported from south to north along the stretching lineation. Geometric features suggest that the Samegawa dome was emplaced by diapirism. The role of the thrust surface as an instable interface promoting the doming is emphasized. The Hitachi metamorphic rocks composed of basic schist, limestone and sandstone shist thrust the pelitic rocks of the western Hitachi gneisses. As for the Takanuki area, the thrusting occurred in ductile synmetamorphic conditions with a north or northeastward displacement. Owing to lithologic, petrologic, structural similitudes, the nappe of the Hitachi metamorphic rocks and that of the Gosaisho series are unified into a unique nappe with a northward motion. The emplacement occurred between late Permian and late Cretaceous likely in late Jurassic. The allochthonous units of the Abukuma massif are correlated with the Green Schist nappe described in Southwest Japan, since they are surrounded by the same zones, namely the Tanba zone and the Kurosegawa-Kitakami one. Moreover both in Southwest and Northeast Japan, the emplacement of the Green Schist nappes is due to a shear deformation inducing rotational structures along the stretching lineation indicating the same sense of transport, that is eastward in Southwest Japan and northward in Northeast Japan, owing to the late bending of the Japanese Islands. The late Jurassic nappe structure is obliquely overprinted by a HT metamorphism, Ryoke in Southwest Japan, Abukuma in Northeast Japan, and afterwards cut by late faults as the Median Tectonic Line or the Tanakura fault, giving rise to the present complexity.     

1906年新疆玛纳斯大震区的多层次逆冲构造与深部结构

通过对天山北麓 190 6年玛纳斯 7 7级地震区的浅层地震探测资料、石油地震反射剖面、二维电性结构剖面、深地震反射剖面的研究 ,发现玛纳斯地震区多层次活动构造系统的根带 ,它通过脆 -韧转换带与天山活动构造块体内上地壳中的低速、高导层连为一体。低速、高导层可能是天山地壳内正在活动的韧性剪切带 ,而齐古逆断裂 -褶皱带下的脆 -韧转换带是连接深部活动韧性剪切带与地壳浅部脆性破裂的枢纽 ,也是现今孕育和发生大地震的重要构造部位。 190 6年玛纳斯地震发生在脆韧转换带的底部 ,地震区的活动逆断裂和褶皱只是部分记录了深部韧性剪切带活动的信息     

Study of thrust and nappe tectonics in the eastern Jiaodong Peninsula, China

Thrust and nappe tectonics have affected the eastern Jiaodong Peninsula, the easternmost terminal of the Sulu Ultra-high Pressure Metamorphic Belt. Four nappes have been mapped, named respectively the Shidao, Rongcheng, Mishan and Mouping nappes. The methods used included multi-scale struc- tural analysis and structural chronology analysis. These nappes define four deep level slip-thrust shear zones that were mainly active in the Mesozoic. The amount of ductile deformation decreases from the Shidao to Rongcheng to Mouping to Mishan shear zones, and shows an inverse relationship with temperature. 40Ar/39Ar chronological analysis and the chronological results of former workers reveal four movement steps defined by the development of thrusts and nappes in the late Triassic (210-180 Ma), extensional movement from the Jurassic to early Cretaceous (180-130 Ma), slip-thrust movement in the Early Cretaceous (130-120 Ma), and extensional movement since the Late Cretaceous (120 Ma). The order of boundary shear zone motion in the period of slip-thrust movement during the Early Cre- taceous (130-120 Ma) was along the Shidao, Rongcheng, Mouping and finally the Mishan shear zone. This resulted in clockwise rotation of the nappes relative to block west to the Tan-Lu Faults. Because of the similar evolutionary history of the Tan-Lu Faults and the thrust and nappe structure in the eastern Jiaodong Peninsula, slip dislocation along the Tan-Lu Faults might have been absorbed by thrust and nappe tectonics in the Jiaodong area in the Mesozoic era, resulting in much less dislocation on the Tan-Lu faults in North Eastern China than that in south along the Jiaodong Peninsula.     

青藏高原东北缘祁连山造山带至阿拉善地块壳幔电性结构研究

在青藏高原东北缘祁连山造山带至阿拉善地块之间完成了一条372km的大地电磁剖面,通过二维反演计算,获得了沿剖面180km深的壳幔电性结构模型,结合研究区地质和地球物理资料开展综合分析,研究结果表明:(1)剖面自南向北所经过的祁连山造山带、走廊过渡带和阿拉善地块对应3种壳幔电性结构模型:东祁连壳幔高-低-高阻似层状电性结构、河西走廊壳幔低阻带状电性结构和阿拉善南缘壳幔高-低-高阻层状电性结构.(2)剖面所经过的主要断裂带在电性结构上表现为低阻异常带或电性梯度带,并且止于中上地壳或消失于下地壳低阻层中.除这些分布于中上地壳的断裂系统以外,在下地壳至上地幔顶部还存在两条切割莫霍面的壳幔韧性剪切带:西华山北缘壳幔韧性剪切带和阿拉善南缘壳幔韧性剪切带.其中,西华山北缘壳幔韧性剪切带可能是1920年海原8.6级地震发生的深部背景之一;而阿拉善南缘壳幔剪切带可能是卫宁北山燕山晚期和喜山期幔源岩浆上升到地壳浅部或喷出到地表的通道,为在该区域寻找晚中生代至新生代含矿隐伏岩体提供了深部电性结构依据.(3)由若干形状不规则、彼此不相连的"碎块状"极高阻块体组成的中上地壳与"似层状"的中下地壳低阻层共同构成的地壳电性结构,是引起青藏高原东北缘强烈破坏性地震最佳的地壳电性结构组合之一.印度板块向欧亚板块俯冲碰撞楔入引起青藏高原块体向北东方向运移与阿拉善地块向南的俯冲碰撞楔入,是青藏高原东北缘强震活动带产生的动力学背景.     

郯-庐断裂带南段深层次的塑性变形特征及区域应变场

本文研究了郯-庐断裂带南段深层次所表露的塑性构造现象,着重测量和分析了大量的变形砾石,从而确立属韧性平移断裂,具有恒体积的平面应变与不均一的简单剪切位移场特征,产生强烈的压缩与拉伸,并伴随有同变形期的动热变质带。同时还初步确定了四个垂深不同层次的平移剪切模式     

Fault-related folds and an imbricate thrust system on the northwestern margin of the northern Fossa Magna region, central Japan

Abstract   The Nishikubiki Mountains, which are located on the northwestern margin of the northern Fossa Magna region, central Japan, and the area offshore to the north of the mountains are underlain by folded and faulted Neogene and Quaternary sequences. The folds are composed of open, symmetric anticlines or tight, asymmetric anticlines trending north 20–70° east. On the basis of the geometry of the anticlines and growth strata, the symmetric and asymmetric anticlines are interpreted as fault-bend folds and fault-propagation folds, respectively. The formation of the anticlines is attributed to the growth of an imbricate thrust system composed of three thrust sheets that developed, from southeast to northwest, mainly in the late Pliocene, early Pleistocene, and middle Pleistocene–Holocene. The horizontal component of the northwestern-most sheet was estimated to be approximately 1.2 km on the basis of the width of the growth triangle, and the thickness of the sheet at its southeast margin was estimated to be 8.5 km on the basis of area balancing along one of the seismic profiles. The thrust is inferred to extend to a depth of more than 10 km toward the southwest. The three thrust sheets are probably connected by a detachment zone along the boundary between the upper and lower crusts. The anticlines are bounded by the Itoigawa–Shizuoka Tectonic Line (ISTL) to the west and by lateral ramps or tip lines to the northeast. The ISTL possibly continues northward offshore into the Toyama Trough. The structural model proposed in this paper suggests that similar thrust systems are wide spread in the northern Fossa Magna region and that active deformation zones have migrated and switched during the past 2–3 million years along the fold belt.     

浙闽裂谷带的成矿意义

浙闽裂谷带为金银铅锌铜钼金属矿床及萤石、高岭土等非金属矿床的重要成矿域,其代表性矿床有治岭头金银矿床、梅仙式块状硫化物多金属矿床、银坑斑岩型钼矿床、湖山萤石矿田、武义萤石矿田等。裂谷带活动具两个旋回,第一旋回与超大陆解体相当,始于新元古代,闭合于加里东期,代表性地层标志为中元古代地层。第二旋回始于燕山早期,止于燕山晚期,代表性地层标志为下侏罗统枫坪组地层及白垩纪断陷盆地沉积地层。第一旋回相对应区域变质、混合岩化、韧性剪切活动及岩浆岩侵位等地质作用。第二旋回相对应大规模火山喷发、岩浆侵位、断陷盆地等地质作用。第一旋回裂谷环境中,形成治岭头式金银矿和梅仙式铅锌多金属矿床的初胚或金属矿床的初始矿体;在第二旋回后期大规模火山热液的成矿作用中,使前者叠加富集,形成了巨大资源量的工业矿体,而岩体侵位形成了一系列斑岩铜矿和浙闽地区极富特色非金属矿、萤石矿成矿带。     

Kinematic analysis of ultrahigh-pressure–high-pressure metamorphic rocks in the Chaglinka–Kulet area of the Kokchetav Massif, Kazakhstan

Abstract The central part of the Kokchetav Massif is exposed in the Chaglinka–Kulet area, northern Kazakhstan. The ultrahigh-pressure–high-pressure (UHP–HP) metamorphic belt in this area is composed of four subhorizontal lithological units (Unit I–IV) metamorphosed under different pressure–temperature (P–T) conditions. The coesite- and diamond-bearing Unit II, which consists mainly of whiteschist and eclogite blocks, is tectonically sandwiched between the amphibolite-dominant Unit I on the bottom and the orthogneiss-dominant Unit III on the top. Total combined thickness of these units is less than 2 km. The rocks of the UHP–HP metamorphic belt are affected by at least four deformational events post-dating peak metamorphism: (i) The earliest penetrative deformation is characterized by non-coaxial ductile flow in a NW–SE direction. The shear sense indicators in oriented samples from Unit I provide consistent top-to-the-northwest motions and those from Unit III provide top-to-the-southeast, south or south-west motions; (ii) Upright folds with subhorizontal enveloping surface refold earlier foliations including shear-indicators throughout the metamorphic belt; (iii) The third stage of deformation is denoted by large-scale bending around a subvertical axis; and (iv) Late localized fault (or shear) zones cut all earlier structures. The fault zones have subvertical shear planes and their displacements are essentially strike-slip in manner. The subhorizontal structure and opposite shear directions between Unit I and Unit III during the earlier deformation stage suggest north-westward extrusion of UHP Unit II.