考虑土体结构性的弹塑性软化模型

采用在原料土中掺入水泥的方法,人工制备试样模拟天然大孔隙结构性土。根据人工制备试样在不同应力路径下等应力比压缩试验结果,确定出结构性土体初始屈服面和初始屈服后塑性应变增量方向;另外,根据三轴排水剪切试验结果建立了土体屈服后硬化规律。在此基础上,提出了一个能够反映土体结构性的弹塑性应变软化模型,并用试验进行了验证。结果表明,所建模型能够较好地反映结构性土体的应力变形规律。     

陇东Q3结构性黄土压剪损伤本构模型试验研究

Q3黄土在我国西北地区分布广泛,且大部分都具有显著的结构性。随着国家“一带一路”倡议的不断向前推进,作为丝路沿线的西北黄土分布地区将迎来新的建设大潮。黄土的结构变形特性非常复杂,深入研究黄土在压缩、剪切条件下的结构损伤变形特性,并依此构建黄土的本构关系在理论研究及现场工程应用中具有非常重要的意义。通过对黄土进行均等压缩试验及三轴剪切试验,基于损伤力学思想,提出黄土结构在均等压缩条件下的平均正应力损伤比,在剪切条件下的平均正应力损伤比及偏应力损伤比。根据弹性、塑性应变确定塑性势线,进而确定其屈服函数;将确定的黄土结构损伤比引入到屈服函数中,得到一定结构损伤时黄土的屈服函数表达式;验证了选取塑性体应变作为本构模型硬化参量的合理性;根据硬化参量与相关试验参数的联系,推导出结构性黄土在压剪条件下的损伤本构模型。经过实测应力-应变曲线与本构模型推算得到的应力-应变曲线对比可知,所建立的本构模型可以较好地反映黄土在压剪条件下结构损伤演化变形过程,具有较好的工程应用前景。     

基于Drucker-Prager准则的岩石弹塑性损伤本构模型研究

大多数岩石材料软化本构模型在硬化函数中引入塑性内变量来表示材料的硬化/软化性质,但并不能反映岩石微裂隙损伤对材料力学性能的影响及单轴拉伸和压缩所表现的初始屈服强度f0与屈服极限fu的差异。基于D-P准则同时考虑塑性软化及损伤软化,建立岩石类材料的弹塑性本构关系及其数值算法。塑性屈服函数采用Borja等的应力张量的硬化/软化函数,反映塑性内变量及应力状态对硬化函数的影响;由于岩石损伤软化是微裂隙扩展所导致的体积膨胀引起的,因此,提出用体积应变表征岩石损伤变量的演化,并用回映隐式积分算法编制了岩石的弹塑性损伤本构程序。对单轴压缩及拉伸荷载作用下的岩石材料试验进行数值模拟,结果表明,所提出的岩石弹塑性损伤本构模型可以较好地符合岩石材料的力学特性。     

软粘土的各向异性和小应变条件下的本构模型(ASM)

以能量方程为基础推导出各向异性和小应变条件下弹塑性的本构方程,并将屈服面与修正桥模型和试验测得的屈服面进行了对比,表明新的屈服面比修正剑桥模型更接近试验结果,采用从初始应力到状态边界面的距离为参数的系数来修正硬化准则以模拟土体小应谱条件下的应力－应变特征。将新的本构模型编入有限元程序,对小应变试验进行了计算分析,计算结果表明,新的模型比修正剑桥模型能更好地反映土体的主要力学特性。     

基于微观力学机制的各向异性结构性砂土的本构模型研究

在岩土破损力学基础上,基于微观破损机制,提出了考虑各向异性的结构性砂土本构理论。采用Lade-Duncan强度准则考虑中主应力对抗剪强度的影响;采用考虑颗粒排列组构的各向异性状态变量A反映各向异性对土体强度和变形的影响;通过相似扩大重塑土的屈服面反映结构性对土性的影响;通过引入非相关联流动法则考虑各向异性和结构性对土体塑性变形的影响。同时,将基于微观力学机制的损伤演化规律引入结构性土的硬化规律;该硬化规律同时考虑了塑性体积应变和剪切应变对各向异性结构性土强度的影响。然后将该模型用于模拟室内三轴压缩试验,初步验证了该模型的合理性和适用性。     

考虑颗粒破碎影响的粗粒土本构关系

粗粒土在较大的应力条件下容易产生颗粒破碎现象,而现有的大多数模型都没有考虑剪切过程中的颗粒破碎。模型将塑性功引入土体受力变形过程的能量方程中,推导得到土体流动法则。采用直线型屈服轨迹和非相关联流动法则,利用不排水应力路径计算得到硬化函数,建立了一个考虑颗粒破碎的粗粒土本构模型。对比分析表明：该模型对粗粒土在各种围压下的应力-应变和体应变计算结果与试验曲线吻合较好。     

对土体动力黏塑性记忆型嵌套面模型的改进

在对土体动力黏塑性记忆型嵌套面本构模型已有的研究基础上,对该模型进行改进,不再对空间锥形屈服面变化时屈服面锥角 的变化规律作假定,按照土体在循环荷载作用下空间屈服面在子午平面上投影线的实际变化规律,建立屈服面硬化参数的增量表达式,完善了该模型的理论基础,为进一步对该模型的试验验证和改进提供了理论依据,并对比分析了分别使用改进后模型和改进前模型计算同一场地地震反应的计算结果。     

近代海积软土结构性及弹-塑性模型研究

土的结构性数学模型是 2 1世纪土力学的核心问题。本文分析了近代海积软土的结构性以及其塑性体应变硬化和塑性偏应变硬化的机制 ,建立了弹塑性本构模型 ,模型采用了具有双硬化参数的屈服轨迹及含结构性参数 m的塑性应变方程。     

基于上下负荷面的弹黏塑性本构模型及应力积分算法实现

为了描述天然软土的时间相依以及结构性特征,提出了一种能考虑土体超固结和结构性的实用弹黏塑性本构模型。它以Asaoka和Hashiguchi的上下负荷面作为某一应变速率下的参考屈服面,按照相对过应力的基本思路,新引入了两个能通过不同应变速率三轴压缩试验测定的率敏性参数 和 ,建立了以当前应力、黏塑性应变以及黏塑性应变速率为状态变量的动屈服准则函数,并给出了基于Newton-Raphson迭代的应力积分算法,且成功地将其嵌入到大型有限元软件ABAQUS中。最终通过数值算例来验证模型的正确性以及应力积分算法的可靠性。结果表明：该模型能同时描述土体的率敏性、蠕变以及结构性特征,模型参数物理意义明确、易懂可测,预测结果与试验数据吻合良好,可用于复杂边值问题的有限元计算。     

土的本构模型研究现状及发展趋势

从两方面总结了前人关于土体本构关系的成果以及目前的发展状况：一方面,从宏观现象学角度介绍了剑桥模型、弹性－硬化塑性模型以及为描述循环荷载条件下土的本构特性所建立的多重屈服面模型和边界模型;另一方面,阐述了土的微观结构和土微结构力学模型的研究状况。认为今后的土本械模型研究趋势必将与土的结构性研究紧密相联,成为２１世纪土力学的核心。     

Modified Structured Cam Clay: A generalised critical state model for destructured,naturally structured and artificially structured clays

This paper presents a generalised constitutive model for destructured, naturally structured and artificially structured clays that extends the Structured Cam Clay (SCC) model. This model is designated as “Modified Structured Cam Clay (MSCC) model”. The influence of structure and destructuring on the mechanical behaviour of clay can be explained by the change in the modified effective stress, which is the sum of the current mean effective stress and the additional mean effective stress due to structure (structure strength). The presence of structure increases the modified mean effective stress and yield surface, enhancing the cohesion, peak strength and stiffness. The destructuring begins when the stress state is on the virgin yield surface. After the failure (peak strength) state, the abrupt destructuring occurs as the soil–cementation structure is crushed; hence the strain softening. The soil structure is completely removed at the critical state when the yield surface becomes identical to the destructured surface. The destructuring law is proposed based on this premise. In the MSCC model, the yield function is the same shape as that of the Modified Cam Clay (MCC) model. A plastic potential is introduced so as to account for the influence of structure on the plastic strain direction for both hardening and softening behaviours. The required model parameters are divided into those describing destructured properties and those describing structured properties. All the parameters have physical meaning and can be simply determined from the conventional triaxial tests. Thus, the MSCC model is a useful tool for geotechnical practitioners. The capability of the model is verified by the test results of destructured, natural structured and artificially structured clays.     

粘土的双硬化模型

本文中建议了一个包含塑性体应变和偏应变两个硬化参数的封闭屈服面模型，可以同时应用于正常固结土和超固结土。该模型沿用了剑桥模型的参数测定方法，而大大拓展其适用范围。通过正常固结试样、超固结试样和应力路线转折条件下计算与试验曲线的对比，说明该模型有较广泛的适应性。     

Simulation of yielding and stress–stain behavior of shanghai soft clay

In this paper, a simple bounding surface plasticity model is used to reproduce the yielding and stress–strain behavior of the structured soft clay found at Shanghai of China. A series of undrained triaxial tests and drained stress probe tests under isotropic and anisotropic consolidation modes were performed on undisturbed samples of Shanghai soft clay to study the yielding characteristics. The degradation of the clay structure is modeled with an internal variable that allows the size of the bounding surface to decay with accumulated plastic strain. An anisotropic tensor and rotational hardening law are introduced to reflect the initial anisotropy and the evolution of anisotropy. Combined with the isotropic hardening rule, the rotational hardening rule and the degradation law are incorporated into the bounding surface formulation with an associated flow rule. Validity of the model is verified by the undrained isotropic and anisotropic triaxial test and drained stress probe test results for Shanghai soft clay. The effects of stress anisotropy and loss of structure are well captured by the model.     

结构性土UH模型

在描述重塑土的统一硬化模型（UH模型）基础上,以动态地移动正常固结线（MNCL）代替静态的正常固结线（NCL）作为参考线来确定参考应力,将土的结构性衰减体现在MNCL的演化中,从而把UH模型扩展为可考虑土结构性的结构性土UH模型。结构性土UH模型可以合理地并连续光滑地描述结构性土的等向压缩规律、应变硬化、应变软化、剪切体积收缩、剪切体积膨胀、不排水剪切减压软化以及结构性和密度耦合影响等力学特性。相比于UH模型,结构性土UH模型新增3个参数,分别用于描述结构性的程度、衰减速度、以及塑性流动规律。通过3种天然土的试验结果与模型预测对比验证了结构性土UH 模型的合理性。     

New basis for the constitutive modelling of aggregated soils

Natural and compacted soils are usually characterized by aggregation of particles. The mechanical behaviour of these materials depends on soil structure. The oedometric compression tests performed on aggregated samples presented here showed that these materials exhibit a yield limit depending not only on stress history and stress state but also on soil structure. Evidence is provided using the neutron tomography technique. These results revealed that soil structure modification occurs together with plastic deformations. The experimental results are used to propose a new state parameter to quantify the soil structure. Based on pore-scale experimental observations, an evolution law for this parameter is proposed as a function of associated plastic strains. Considering both soil fabric and inter-particle bonding effects, a new yield limit depending on stress state, stress history and soil structure is introduced for the aggregated soils. Accordingly, a new constitutive framework consistent with strain hardening plasticity is proposed to consider soil structure effects in the modelling of aggregated soils.     

A cap model for partially saturated soils

The present paper deals with the extension of a cap model in order to describe the material behavior of partially saturated soils, in particular, of partially saturated sands and silts. The soil model is formulated in terms of two stress state variables, using net stress and matric suction and, alternatively, the average soil skeleton stress and suction, the latter playing the role of a stress‐like plastic internal variable. The yield surface, consisting of a shear failure surface and a hardening cap surface, the plastic potentials for the non‐associated flow rule and the hardening law for the cap are extended by taking into account the effects of matric suction on the material behavior. Furthermore, the third invariant of the deviatoric stress tensor is taken into account in the formulation of the yield surfaces. The developed model is validated by the numerical simulation of an extensive series of suction controlled tests for a silty sand, which were conducted at different constant values of suction. Although both versions of the soil model yield identical results for stress paths at constant values of matric suction, differences are encountered for stress paths involving wetting. Copyright © 2007 John Wiley & Sons, Ltd.     

A two-surface plasticity model for stiff clay

This paper presents a constitutive model for describing some important features of the behavior of natural stiff clay evidenced experimentally such as the limited elastic zone, the presence of strain hardening and softening, and the smooth transition from elastic behavior to a plastic one. The model, namely ACC-2, is an adapted Modified Cam Clay model with two yield surfaces: similarly to bounding surface plasticity theory, an additional yield surface—namely Inner yield surface—was adopted to account for the plastic behavior inside the conventional yield surface. A progressive plastic hardening mechanism was introduced with a combined volumetric-deviatoric hardening law associated with the Inner yield surface, enabling the plastic modulus to vary smoothly during loading paths. The main feature of the proposed model is that its constitutive equations can be simply formulated based on the consistency condition for the Inner yield surface, so that it can be efficiently implemented in a finite element code using a stress integration scheme similar to that of the Modified Cam Clay model. Furthermore, it is proved to be an appropriate model for natural stiff clay: the simulations of a set of tests along different mechanical loading paths on natural Boom Clay show good agreement with the experimental results.     

描述饱和黏性土应变软化的弹塑性双面模型

常规三轴压缩试验中具有较强结构性的黏性土在围压较低时其应力−应变关系会呈现应变软化现象,一般还伴有塑性变形,通常土体内部结构损伤是应变软化产生的主要原因。考虑到采用经典塑性理论描述材料的应变软化不仅会违背 Drucker 的稳定性假设,而且也不能描述卸载塑性。因此,基于修正剑桥模型及 Li 和 Meissner 提出的塑性硬化准则,建立了一个描述饱和黏性土不排水应变软化的弹塑性双面模型。该模型以应力−应变曲线的峰值点分界,将应变硬化和应变软化分别作为独立的加载事件进行分析,同时引入新的结构性参数表征剪切过程中土体结构损伤导致的塑性刚度衰退。对不同固结状态饱和结构性黏土的三轴固结不排水压缩试验结果的模拟表明,所建模型能够较好地描述饱和黏性土的不排水应变软化特性。