Coupling between Pbex and organic matter in sediments of a nutrient-enriched lake: An example from Lake Chenghai, China

Sediment cores were collected from deep-water areas of Lake Chenghai, China in June 1997. The vertical profile of ¹³⁷Cs activity gives reliable geochronological results. The results also indicate that sediment accumulation rates in deep-water areas of Lake Chenghai were relatively constant in recent decades, averaging 0.43 g cm^− 2 y^− 1, despite a variable organic carbon influx. ²¹⁰Pb_eq (= ²²⁶Ra) activity was relatively constant also, with an average value of 54.3 ± 3.2 Bq kg^− 1. Vertical profiles of ²¹⁰Pb_ex (= ²¹⁰Pb_total − ²²⁶Ra) decreased exponentially, resulting in somewhat lower sediment accumulation rates (0.3 g cm^− 2 y^− 1). These lower rates are likely less reliable, as the relatively large fluctuations in ²¹⁰Pb_ex activities correlate closely to the organic carbon (C_org) content of the sediments. For example, the vertical profile of ²¹⁰Pb_ex activity displays peaks at mass depths of 3.7-4.7 g cm^− 2 (10-12 cm) and 10-11 g cm^− 2(25-28 cm), similar to the maxima in the vertical profile of C_org. This phenomenon must be related to the delivery of particulate organic matter (POM) from the water to the sediments, or to watershed soil erosion. Since the mean atomic ratios of H_org / C_org and C_org / N_org in Lake Chenghai sediments are 5.5 and 7.0, respectively, indicating that POM was predominantly derived from the remains of authigenic algae, this eliminates watershed erosion rates as a primary control on lake sedimentation rates as resolved by ²¹⁰Pb_ex. Sedimentation fluxes (F(C_org)) of particulate organic carbon since 1970 varied between 60 to 160 g m^− 2 y^− 1, and appeared to closely influence variations in ²¹⁰Pb_ex concentrations. For example, sedimentation fluxes of ²¹⁰Pb_ex (F(²¹⁰Pb_ex)) showed maxima in the years 1972-1974 and 1986-1989, likely reflecting historical variations of lake biological productivity or carbon preservation.     

NEXAFS and XPS characterisation of carbon functional groups of fresh and aged biochars

The oxidation of surface functional groups on biochar increases its reactivity and may contribute to the cation exchange capacity of soil. In this study, two Eucalyptus wood biochars, produced at 450 °C (B450) and 550 °C (B550), were incubated separately in each of the four contrasting soils for up to 2 years at 20 °C, 40 °C and 60 °C. Carbon functional groups of the light fraction (< 1.8 g/cm³) of the control and biochar amended soils (fresh and aged for 1 and 2 years at 20 °C, 40 °C and 60 °C) were investigated using near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS). The spectra of biochar and light fractions of the control and biochar amended soils showed two distinct peaks at ∼285.1 eV and 288.5 eV, which were attributed to the C1s-π¹_CC transitions of aromatic C and C1s-π¹_CO transitions of carboxylic C, carboxyamide C and carbonyl C. The proportion of aromatic C was substantially greater in the light fraction of the biochar amended soils than the corresponding light fraction of the control soils. Also, the proportion of aromatic C was much higher in the light fraction of the B550 amended soils than in the corresponding B450 amended soils. Neither NEXAFS nor XPS results show any consistent change in the proportion of aromatic C of biochar amended soils after 1 year ageing. However, XPS analysis of hand-picked biochar samples showed an increase in the proportion of carboxyl groups after ageing for 2 years, with an average value of 8.9% in the 2 year aged samples compared with 3.0% in the original biochar and 6.4% in the control soil. Our data suggest that much longer ageing time will be needed for the development of a significant amount of carboxyl groups on biochar surfaces.     

Limitations on the climatic and ecological signals provided by the δC values of phytoliths from a C4 North American prairie grass

Silica phytoliths, which are deposits of opal-A that precipitate in the intra- and intercellular spaces of plant tissues during transpiration, commonly contain small amounts of occluded organic matter. In this paper, we investigate whether the δ¹³C values of phytoliths from a C₄ grass, Calamovilfa longifolia, vary in response to climatic variables that can affect the carbon-isotope composition of plant tissues. There is no significant correlation (r² < 0.3) between climate variables and the δ¹³C values of C. longifolia tissues (average δ¹³C_tissue = −13.1 ± 0.6 ‰; n = 70) across the North American prairies. However, plant tissue δ¹³C values are lower for grasses collected in populated areas where the δ¹³C value of atmospheric CO₂ is expected to be lower because of fossil fuel burning. Phytolith δ¹³C values are more variable (δ¹³C = −27.3 to −23.0‰; average = −25.1 ± 1.3‰; n = 34) and more sensitive to changes in aridity than whole tissue δ¹³C values. The strongest correlations are obtained between the δ¹³C values of stem or sheath phytoliths and humidity (r² = 0.3), latitude (r² = 0.4) and amount of precipitation (r² = 0.5). However, use of these relationships is limited by the wide spread in δ¹³C values of phytoliths from different plant tissues at the same location. We have been unable to infer any relationship between δ¹³C values of phytoliths and expected variations in the δ¹³C values of atmospheric CO₂. The C. longifolia phytoliths are depleted of ¹³C relative to tissue carbon by 10-14‰. This means that the phytoliths examined in this study have carbon isotopic compositions within the range reported previously for phytoliths from C₃ plants. This observation may further limit the usefulness of soil-phytolith assemblage δ¹³C values for identifying shifts in grassland C₃:C₄ ratios.     

The origins and behaviour of carbon in a major semi-arid river,the Murray River,Australia, as constrained by carbon isotopes and hydrochemistry

δ¹³C values of dissolved inorganic C (DIC), dissolved organic C (DOC), and particulate organic C (POC) together with δ¹⁸O and δ²H values of water, δ³⁴S values of dissolved SO₄, and major ion concentrations were measured in the Murray River and its tributaries between November 2005 and April 2007 to constrain the origins and behaviour of riverine C. δ¹³C_DIC values in the Murray River vary between −9.5 and −4.7‰ with a range of <3‰ within any sampling round. δ¹³C_DIC values of the tributaries are −11.0‰ to −5.1‰. DIC concentrations of the Murray River increase from ∼25 mg/L in the middle and upper reaches of the river to 45–55 mg/L in the lower reaches. However, the mass ratio of DIC as a proportion of the total dissolved solids (TDS) decreases from ∼0.6–0.7 in the headwaters to ∼0.2–0.3 in the lower reaches of the river, with similar downstream changes in DIC/Cl ratios. This precludes simple evaporative concentration of DIC and is interpreted as the river evading CO₂; this interpretation is consistent with pCO₂ values that are in the range 550–11,200 ppm volume (ppmv), which are far higher than those in equilibrium with the atmosphere (∼360 ppmv). The δ¹³C_DIC values are similar to those that would be produced by the weathering of marine limestone (δ¹³C ∼ 0‰). However, the lack of marine limestones cropping out in the Murray–Darling Basin and the relatively uniform δ¹³C_DIC values of the Murray River (even in upland reaches where the dominant rock types are metamorphosed silicates and granites) make this unlikely. Rather the high pCO₂ values and δ¹³C_DIC values are best explained by a combination of mineralisation of low δ¹³C organic C and evasion to the atmosphere. The rate of these two processes may attain near steady state and control both DIC concentrations and δ¹³C values.     

Chemical and isotopic tracers of the contribution of microbial gas in Devonian organic-rich shales and reservoir sandstones,northern Appalachian Basin

In this study, the geochemistry and origin of natural gas and formation waters in Devonian age organic-rich shales and reservoir sandstones across the northern Appalachian Basin margin (western New York, eastern Ohio, northwestern Pennsylvania, and eastern Kentucky) were investigated. Additional samples were collected from Mississippian Berea Sandstone, Silurian Medina Sandstone and Ordovician Trenton/Black River Group oil and gas wells for comparison. Dissolved gases in shallow groundwaters in Devonian organic-rich shales along Lake Erie contain detectable CH₄ (0.01–50.55 mol%) with low δ¹³C–CH₄ values (−74.68 to −57.86‰) and no higher chain hydrocarbons, characteristics typical of microbial gas. Nevertheless, these groundwaters have only moderate alkalinity (1.14–8.72 meq/kg) and relatively low δ¹³C values of dissolved inorganic C (DIC) (−24.8 to −0.6‰), suggesting that microbial methanogenesis is limited. The majority of natural gases in Devonian organic-rich shales and sandstones at depth (>168 m) in the northern Appalachian Basin have a low CH₄ to ethane and propane ratios (3–35 mol%; C₁/C₂ + C₃) and high δ¹³C and δD values of CH₄ (−53.35 to −40.24‰, and −315.0 to −174.6‰, respectively), which increase in depth, reservoir age and thermal maturity; the molecular and isotopic signature of these gases show that CH₄ was generated via thermogenic processes. Despite this, the geochemistry of co-produced brines shows evidence for microbial activity. High δ¹³C values of DIC (>+10‰), slightly elevated alkalinity (up to 12.01 meq/kg) and low SO₄ values (<1 mmole/L) in select Devonian organic-rich shale and sandstone formation water samples suggest the presence of methanogenesis, while low δ¹³C–DIC values (<−22‰) and relatively high SO₄ concentrations (up to 12.31 mmole/L) in many brine samples point to SO₄ reduction, which likely limits microbial CH₄ generation in the Appalachian Basin. Together the formation water and gas results suggest that the vast majority of CH₄ in the Devonian organic-rich shales and sandstones across the northern Appalachian Basin margin is thermogenic in origin. Small accumulations of microbial CH₄ are present at shallow depths along Lake Erie and in western NY.     

Controls on dissolved inorganic carbon and δC in cave waters from DeSoto Caverns: Implications for speleothem δC assessments

Unraveling the factors controlling the carbon chemistry and transport of carbon within extant karst systems has important implications concerning the assessment of time-series δ¹³C records of speleothems. Here we report the results of a 3-year study of total dissolved inorganic carbon [DIC] and δ¹³C_DIC from cave waters at DeSoto Caverns (Southeastern USA) that offer valuable insight on carbon transport and the accompanied isotope fractionations from end-member sources to speleothems.[DIC] and δ¹³C_DIC values of cave waters range from 0.2 to 6.0 mM and 2.7 to −12.9 (‰ VPDB), respectively. [DIC] and δ¹³C_DIC of “seasonal drips” show seasonal, albeit noisy, variability and are inversely related (δ¹³C_DIC = −2.49[DIC] + 0.64, r² = 0.84). A shallow pool fed by multiple drips shows a bimodal δ¹³C_DIC distribution with an isotopically heavier mode during winter (−4‰ to −5‰ VPDB) relative to summer months (−9‰ to −10‰ VPDB). A multi-year trend of decreasing water availability during the study period is not reflected in a response of cave water carbon chemistry suggesting that rainfall amount may not be a significant controlling factor of the carbon chemistry. Coupled cave air winter ventilation/summer stagnation and varying CO₂ fluxes through the soil horizon and epikarst exert the strongest influence on seasonal [DIC] and δ¹³C_DIC variability. Measured values of high [DIC] and low δ¹³C_DIC from cave waters collected during the summer/early fall closely approximate isotopic equilibrium conditions. Conversely, low [DIC] and high δ¹³C_DIC values during winter/early months indicate kinetically enhanced isotopic fractionations within the cave waters. The kinetically enhanced isotopic fractionation of partitioned between degassed CO₂ and precipitated CaCO₃(1000lnα_{[(CO2-HCO3)+(CaCO3(AR)-HCO3)]/2}) is greater by about a factor of two (−6.7 ± 0.3‰) relative to the same isotopic fractionation under equilibrium conditions (−3.1‰).On the basis of ¹⁴C mass balance and paired ¹⁴C-U/Th measurements we estimate that on average about ∼23% of C delivered annually by the drips to the aragonite stalagmites is derived from ¹⁴C-dead dolomite cap while the remainder of ∼77% is derived from ¹⁴C-live biomass. δ¹³C measurements of aragonite (n = 12) sampled from the tips of active speleothems during the summer months are consistent with theoretical aragonite δ¹³C values calculated using the shallow pool summer/early fall data thus confirming the δ¹³C seasonality in both drips and coeval aragonite. δ¹³C values of an active stalagmite section spanning the last 200 years show a normal distribution with a mean of −7.1 ± 1.2‰ (n = 81) and a mode of −7‰ to −8‰ that are statistically indistinguishable from the annual mean and mode of all dripwaters. Thus secular time-series δ¹³C records of stalagmites at DeSoto Caverns with resolving power >10⁻¹ year will likely carry the imprints of drip annual means that record climate-driven δ¹³C seasonal biases.     

Indoor and outdoor urban atmospheric CO2: Stable carbon isotope constraints on mixing and mass balance

From July to November 2009, concentrations of CO₂ in 78 samples of ambient air collected in 18 different interior spaces on a university campus in Dallas, Texas (USA) ranged from 386 to 1980 ppm. Corresponding δ¹³C values varied from −8.9‰ to −19.4‰. The CO₂ from 22 samples of outdoor air (also collected on campus) had a more limited range of concentrations from 385 to 447 ppm (avg. = 408 ppm), while δ¹³C values varied from −10.1‰ to −8.4‰ (avg.=-9.0‰). In contrast to ambient indoor and outdoor air, the concentrations of CO₂ exhaled by 38 different individuals ranged from 38,300 to 76,200 ppm (avg. = 55,100 ppm), while δ¹³C values ranged from −24.8‰ to −17.7‰ (avg. = −21.8‰). The residence times of the total air in the interior spaces of this study appear to have been on the order of 10 min with relatively rapid approaches (∼30 min) to steady-state concentrations of ambient CO₂ gas. Collectively, the δ¹³C values of the indoor CO₂ samples were linearly correlated with the reciprocal of CO₂ concentration, exhibiting an intercept of −21.8‰, with r² = 0.99 and p < 0.001 (n = 78). This high degree of linearity for CO₂ data representing 18 interior spaces (with varying numbers of occupants), and the coincidence of the intercept (−21.8‰) with the average δ¹³C value for human-exhaled CO₂ demonstrates simple mixing between two inputs: (1) outdoor CO₂ introduced to the interior spaces by ventilation systems, and (2) CO₂ exhaled by human occupants of those spaces. If such simple binary mixing is a common feature of interior spaces, it suggests that the intercept of a mixing line defined by two data points (CO₂ input from the local ventilation system and CO₂ in the ambient air of the room) could be a reasonable estimate of the average δ¹³C value of the CO₂ exhaled by the human occupants. Thus, such indoor spaces appear to constitute effective “sample vessels” for collection of CO₂ that can be used to determine the average proportions of C₃ and C₄-derived C in the diets of the occupants. For the various groups occupying the rooms sampled in this study, C₄-derived C appears to have constituted ∼40% of the average diet.     

An experimental study of the solubility of baddeleyite (ZrO2) in fluoride-bearing solutions at elevated temperature

The solubility of baddeleyite (ZrO₂) and the speciation of zirconium have been investigated in HF-bearing aqueous solutions at temperatures up to 400 °C and pressures up to 700 bar. The data obtained suggest that in HF-bearing solutions zirconium is transported mainly in the form of the hydroxyfluoride species ZrF(OH)₃° and ZrF₂(OH)₂°. Formation constants determined for these species (Zr⁴⁺ + nF⁻ + mOH⁻ = ZrF_n(OH)_m°) range from 43.7 at 100 °C to 46.41 at 400 °C for ZrF(OH)₃°, and from 37.25 at 100 °C to 43.88 at 400 °C for ZrF₂(OH)₂°.Although the solubility of ZrO₂ is retrograde with respect to temperature, the measured concentrations of Zr are orders of magnitude higher than those predicted from theoretical extrapolations based on simple fluoride species (ZrF³⁺-ZrF₆²⁻). Model calculations performed for zircon show that zirconium can be transported by aqueous fluids in concentrations sufficient to account for the concentration of this metal at conditions commonly encountered in fluoride-rich natural hydrothermal systems.     

Geochemical features and origin of natural gas in heavy oil area of the Western Slope,Songliao Basin,China

The Western Slope of the Songliao Basin is rich in heavy oil resources (>70 × 10⁸ bbl), around which there are shallow gas reservoirs (∼1.0 × 10¹² m³). The gas is dominated by methane with a dryness over 0.99, and the non-hydrocarbon component being overwelmingly nitrogen. Carbon isotope composition of methane and its homologs is depleted in ¹³C, with δ¹³C₁ values being in the range of −55‰ to −75‰, δ¹³C₂ being in the range of −40‰ to −53‰ and δ¹³C₃ being in the range of −30‰ to −42‰, respectively. These values differ significantly from those solution gases source in the Daqing oilfield. This study concludes that heavy oils along the Western Slope were derived from mature source rocks in the Qijia-Gulong Depression, that were biodegraded. The low reservoir temperature (30–50 °C) and low salinity of formation water with neutral to alkaline pH (NaHCO₃) appeared ideal for microbial activity and thus biodegradation. Natural gas along the Western Slope appears mainly to have originated from biodegradation and the formation of heavy oil. This origin is suggested by the heavy δ¹³C of CO₂ (−18.78‰ to 0.95‰) which suggests that the methane was produced via fermentation as the terminal decomposition stage of the oil.     

Sulfur speciation in natural hydrothermal waters, Iceland

The speciation of aqueous dissolved sulfur was determined in hydrothermal waters in Iceland. The waters sampled included hot springs, acid-sulfate pools and mud pots, sub-boiling well discharges and two-phase wells. The water temperatures ranged from 4 to 210 °C, the pH_T was between 2.20 and 9.30 at the discharge temperature and the SO₄ and Cl concentrations were 0.020-52.7 and <0.01-10.0 mmol kg⁻¹, respectively. The analyses were carried out on-site within ∼10 min of sampling using ion chromatography (IC) for sulfate (SO₄²⁻), thiosulfate (S₂O₃²⁻) and polythionates (S_xO₆²⁻) and titration and/or colorimetry for total dissolved sulfide (S²⁻). Sulfite (SO₃²⁻) could also be determined in a few cases using IC. Alternatively, for few samples in remote locations the sulfur oxyanions were stabilized on a resin on site following elution and analysis by IC in the laboratory. Dissolved sulfate and with few exceptions also S²⁻ were detected in all samples with concentrations of 0.02-52.7 mmol kg⁻¹ and <1-4100 μmol kg⁻¹, respectively. Thiosulfate was detected in 49 samples of the 73 analyzed with concentrations in the range of <1-394 μmol kg⁻¹ (S-equivalents). Sulfite was detected in few samples with concentrations in the range of <1-3 μmol kg⁻¹. Thiosulfate and SO₃²⁻ were not detected in <100 °C well waters and S₂O₃²⁻ was observed only at low concentrations (<1-8 μmol kg⁻¹) in ∼200 °C well waters. In alkaline and neutral pH hot springs, S₂O₃²⁻ was present in significant concentrations sometimes corresponding to up to 23% of total dissolved sulfur (S_TOT). In steam-heated acid-sulfate waters, S₂O₃²⁻ was not a significant sulfur species. The results demonstrate that S₂O₃²⁻ and SO₃²⁻ do not occur in the deeper parts of <150 °C hydrothermal systems and only in trace concentrations in ∼200-300 °C systems. Upon ascent to the surface and mixing with oxygenated ground and surface waters and/or dissolution of atmospheric O₂, S²⁻ is degassed and oxidized to SO₃²⁻ and S₂O₃²⁻ and eventually to SO₄²⁻ at pH >8. In near-neutral hydrothermal waters the oxidation of S²⁻ and the interaction of S²⁻ and S⁰ resulting in the formation of S_x²⁻ are considered important. At lower pH values the reactions seemed to proceed relatively rapidly to SO₄²⁻ and the sulfur chemistry of acid-sulfate pools was dominated by SO₄²⁻, which corresponded to >99% of S_TOT. The results suggest that the aqueous speciation of sulfur in natural hydrothermal waters is dynamic and both kinetically and source-controlled and cannot be estimated from thermodynamic speciation calculations.     

Can pelagic net heterotrophy account for carbon fluxes from eastern Canadian lakes?

Lakes worldwide are commonly oversaturated with CO₂, however the source of this CO₂ oversaturation is not well understood. To examine the magnitude of the C flux to the atmosphere and determine if an excess of respiration (R) over gross primary production (GPP) is sufficient to account for this C flux, metabolic parameters and stable isotopes of dissolved O₂ and C were measured in 23 Québec lakes. All of the lakes sampled were oversaturated with CO₂ over the sampling period, on average 221 ± 25%. However, little evidence was found to conclude that this CO₂ oversaturation was the result of an excess of pelagic R over GPP. In lakes Croche and à l’Ours, where CO₂ flux, R and GPP were measured weekly, the annual difference between pelagic GPP and R, or net primary production (NPP), was not sufficient to account for the size of the CO₂ flux to the atmosphere. In Lac Croche average annual NPP was 14.4 mg C m⁻² d⁻¹ while the average annual flux of CO₂ to the atmosphere was 34 mg C m⁻² d⁻¹. In Lac à l’Ours average annual NPP was −9.1 mg C m⁻² d⁻¹ while the average annual flux of CO₂ to the atmosphere was 55 mg C m⁻² d⁻¹. In all of the lakes sampled, O₂ saturation averaged 104.0 ± 1.7% during the ice-free season and the isotopic composition of dissolved O₂ (δ¹⁸O_DO) was 22.9 ± 0.3‰, lower than atmospheric values and indicative of net autotrophy. Carbon evasion was not a function of R, nor did the isotopic signature of dissolved CO₂ in the lakes present evidence of excess R over GPP. External inputs of C must therefore subsidize the lake to explain the continued CO₂ oversaturation. The isotopic composition of dissolved inorganic C (δ¹³C_DIC) indicates that the CO₂ oversaturation cannot be attributed to in situ aerobic respiration. δ¹³C_DIC reveals a source of excess C enriched in ¹³C, which may be accounted for by anaerobic sediment respiration or groundwater inputs followed by kinetic isotope fractionation during degassing under open system conditions.     

Experimental study of nickel(II) interaction with calcite: Adsorption and coprecipitation

Partitioning of Ni in calcite, CaCO₃, was evaluated with the aim of collecting data on partition and distribution coefficients and to enhance understanding about the interaction of Ni with the calcite surface and further incorporation into the bulk. This information will aid in the interpretation of geological processes for safety assessment of waste repositories and contamination of groundwater. Coprecipitation experiments were carried out by the constant addition method at 25 °C and pCO₂ = 1 and 10^−3.5 atm. Ni was moderately partitioned from solution into calcite. For dilute solid solutions (X_Ni < 0.001), Ni partition coefficients were estimated to be ∼1 and found to be weakly dependent on calcite precipitation rate in the range of 3-230 nmol m⁻² s⁻¹. Ni molar fraction in the solid is directly proportional to Ni concentration in the solution. The fit of the data to such a model is good evidence that Ni is taken up as a true solid solution, not simply by physical trapping.     

Gas seepage from Tokamachi mud volcanoes, onshore Niigata Basin (Japan): Origin, post-genetic alterations and CH4-CO2 fluxes

Methane and CO₂ emissions from the two most active mud volcanoes in central Japan, Murono and Kamou (Tokamachi City, Niigata Basin), were measured in from both craters or vents (macro-seepage) and invisible exhalation from the soil (mini- and microseepage). Molecular and isotopic compositions of the released gases were also determined. Gas is thermogenic (δ¹³C_CH4 from −32.9‰ to −36.2‰), likely associated with oil, and enrichments of ¹³C in CO₂ (δ¹³C_CO2 up to +28.3‰) and propane (δ¹³C_C3H8 up to −8.6‰) suggest subsurface petroleum biodegradation. Gas source and post-genetic alteration processes did not change from 2004 to 2010. Methane flux ranged within the orders of magnitude of 10¹-10⁴ g m⁻² d⁻¹ in macro-seeps, and up to 446 g m⁻² d⁻¹ from diffuse seepage. Positive CH₄ fluxes from dry soil were widespread throughout the investigated areas. Total CH₄ emission from Murono and Kamou were estimated to be at least 20 and 3.7 ton a⁻¹, respectively, of which more than half was from invisible seepage surrounding the mud volcano vents. At the macro-seeps, CO₂ fluxes were directly proportional to CH₄ fluxes, and the volumetric ratios between CH₄ flux and CO₂ flux were similar to the compositional CH₄/CO₂ volume ratio. Macro-seep flux data, in addition to those of other 13 mud volcanoes, supported the hypothesis that molecular fractionation (increase of the “Bernard ratio” C₁/(C₂ + C₃)) is inversely proportional to gas migration fluxes. The CH₄ “emission factor” (total measured output divided by investigated seepage area) was similar to that derived in other mud volcanoes of the same size and activity. The updated global “emission-factor” data-set, now including 27 mud volcanoes from different countries, suggests that previous estimates of global CH₄ emission from mud volcanoes may be significantly underestimated.     

Changes in the composition of organic matter from prodeltaic sediments after a large flood event (Po River, Italy)

The Po River (Italy) experienced a 100-year flood in October 2000. Surface sediments (0-1 cm) from cross-shelf transects were collected in the Po prodelta area (Adriatic Sea) in December 2000, in order to describe the distribution of organic matter (OM) along the main sediment dispersal system immediately after the flood event. Stations were subsequently reoccupied in October 2001 and April 2002. This sampling program provided a special opportunity to characterize the initial surficial flood deposit and the evolution of its associated OM over the course of 2 years. CuO oxidation, elemental, δ¹³C, Δ¹⁴C, and grain-size analyses were carried out to characterize the source, age, and spatial variability of sedimentary OM. Statistical analysis (PERMANOVA) was then applied to investigate temporal changes in different portions of the Po prodelta area. Isotopic and biomarker data suggest that the sedimentary OM in the flood deposit was initially dominated by aged (Δ¹⁴C_Dec-00 = −298.7 ± 56.3‰), lignin-poor OM (Λ_Dec-00 = 1.96 ± 0.33 mg/100 mg OC), adsorbed on the fine material (clay_Dec-00 = 72.1 ± 4.8%) delivered by the flood. In the 2 years following the flood, post-depositional processes significantly increased the content of lignin (Λ_Oct-01 = 2.19 ± 0.51 mg/100 mg OC; Λ_Apr-02 = 2.61 ± 0.63 mg/100 mg OC); and coarse material (silt and sand), while decreasing the contributions from aged OC (Δ¹⁴C_Oct-01 = −255.7 ± 32.8‰; Δ¹⁴C_Apr-02 = −213.2 ± 30.4‰) and fine fraction (clay_Oct-01 = 54.8 ± 9.5%; clay_Apr-02 = 44.6 ± 13.3%). The major changes were observed in the northern and central portions of the prodelta.     

Stable isotope geochemistry of ground and surface waters associated with undisturbed massive sulfide deposits; constraints on origin of waters and water-rock reactions

Stable isotopes (H, O, C) were determined for ground and surface waters collected from two relatively undisturbed massive sulfide deposits (Halfmile Lake and Restigouche) in the Bathurst Mining Camp (BMC), New Brunswick, Canada. Additional waters from active and inactive mines in the BMC were also collected. Oxygen and hydrogen isotopes of surface and shallow groundwaters from both the Halfmile Lake and Restigouche deposits are remarkably uniform (− 13 to − 14‰ and − 85 to − 95‰ for δ¹⁸O_VSMOW and δ²H_VSMOW, respectively). These values are lighter than predicted for northern New Brunswick and, combined with elevated deuterium excess values, suggest that recharge waters are dominated by winter precipitation, recharged during spring melting. Deeper groundwaters from the Restigouche deposit, and from active and inactive mines have heavier δ¹⁸O_VSMOW ratios (up to − 10.8‰) than shallow groundwaters suggesting recharge under warmer climate or mixing with Shield-type brines. Some of the co-variation in Cl concentrations and δ¹⁸O_VSMOW ratios can be explained by mixing between saline and shallow recharge water end-members. Carbon isotopic compositions of dissolved inorganic carbon (DIC) are variable, ranging from − 15 to − 5‰ δ¹³C_VPDB for most ground and surface waters. Much of the variation in the carbon isotopes is consistent with closed system groundwater evolution involving soil zone CO₂ and fracture zone carbonate minerals (calcite, dolomite and siderite; average = − 6.5‰ δ¹³C_VPDB). The DIC of saline Restigouche deposit groundwater is isotopically heavy (∼+ 12‰ δ¹³C_VPDB), indicating carbon isotopic fractionation from methanogenesis via CO₂ reduction, consistent with the lack of dissolved sulfate in these waters and the observation of CH₄-degassing during sampling.     

Dissolution kinetics of diopside as a function of solution saturation state: Macroscopic measurements and implications for modeling of geological storage of CO2

Measurements of the dissolution rate of diopside (r) were carried out as a function of the Gibbs free energy of the dissolution reaction (ΔG_r) in a continuously stirred flow-through reactor at 90 °C and pH_90 °C = 5.05. The overall relation between r and ΔG_r was determined over a free energy range of −130.9 < ΔG_r < −47.0 kJ mo1⁻¹. The data define a highly non-linear, sigmoidal relation between r and ΔG_r. At far-from-equilibrium conditions (ΔG_r ? −76.2 kJ mo1⁻¹), a rate plateau is observed. In this free energy range, the rates of dissolution are constant, independent of [Ca], [Mg] and [Si] concentrations, and independent of ΔG_r. A sharp decrease of the dissolution rate (∼1 order of magnitude) occurs in the transition ΔG_r region defined by −76.2 < ΔG_r ? −61.5 kJ mo1⁻¹. Dissolution closer to equilibrium (ΔG_r > −61.5 kJ mo1⁻¹) is characterised by a much weaker inverse dependence of the rates on ΔG_r. Modeling the experimental r-ΔG_r data with a simple classical transition state theory (TST) law as implemented in most available geochemical codes is found inappropriate. An evaluation of the consequences of the use of geochemical codes where the r-ΔG_r relation is based on basic TST was carried out and applied to carbonation reactions of diopside, which, among other reactions with Ca- and Mg-bearing minerals, are considered as a promising process for the solid state sequestration of CO₂ over long time spans. In order to take into account the actual experimental r-ΔG_r relation in the geochemical code that we used, a new module has been developed. It reveals a dramatic overestimation of the carbonation rate when using a TST-based geochemical code. This points out that simulations of water-rock-CO₂ interactions performed with classical geochemical codes should be evaluated with great caution.     

Carbon isotope effects in the open-system Fischer-Tropsch synthesis

Carbon isotopic composition was measured for products of the Fischer-Tropsch synthesis: catalytic reaction between CO and H₂ to produce CO, CO₂, light hydrocarbons C1-C4 and “oil” fraction. Hydrogen isotopes were also measured in the oil fraction and the produced water. Experimental runs were conducted in the flow-through reactor at 260-310 °C and 30 bar using the synthesis gas composed of 5N₂ + 3H₂ + 2CO, on Fe-catalyst mixed with ZSM-5 synthetic zeolite. In the two of seven runs a Fe + Co-catalyst was used that gives a lower yield of unsaturated hydrocarbons in reaction products. The isotopic effects depended on the conversion of the carbon monoxide. Under steady-state conditions (CO conversion more than 90%) a strong kinetic fractionation was observed between CO and CO₂ (∼−10‰) and CO and hydrocarbons (∼+38‰). At low conversion a clear “inverse” isotopic trend of the depletion in ¹³C of longer hydrocarbon chains was observed. On average, Δ₁₂ = δ¹³C(CH₄) − δ¹³C(C₂H₆) correlates well with the CO conversion: the C₂H₆ is ∼6‰ isotopically lighter than CH₄ at low conversion and ∼2‰ heavier at steady-state regime. Under steady-state conditions there almost no difference was observed in the isotopic composition of methane and ethane and higher hydrocarbons. The chemical composition of light hydrocarbons in the products of flow-through, dynamic FTS is different from that found in the static FTS-type experiments with Fe-catalyst, but isotopic effects are similar. Our results suggest that the isotopic distribution of carbon found in so-called “abiogenic” hydrocarbons from some natural gases (δ¹³C1 > δ¹³C2 > δ¹³C3  >?) is somewhat similar to that at low conversion of CO, but do not resemble the distribution characteristic for the high conversion products, at least, on Fe-catalyst. Other processes (a simple mixing of two or more endmembers) or other P-T conditions of the carbon reduction could be responsible for the “inverse” isotopic trend found in meteorites and some natural gases.     

The solubility of molybdenum dioxide and trioxide in HCl-bearing water vapour at 350 °C and pressures up to 160 bars

The solubility and speciation of the assemblage MoO₂-MoO₃ in water vapour were investigated in experiments conducted at 350 °C, P_total from 59 to 160 bar and fHCl from 0 to 3.4 bar (0-2.0 mol%). Measured solubility at these conditions ranges from 22 to 2500 ppm (∑fMo from 4.4 × 10⁻⁴ to 6.5 × 10⁻² bar). The concentration of Mo in the vapour at fHCl below 0.1 bar is similar to that in pure water vapour, but increases by two orders of magnitude at fHCl above 0.1 bar. The fugacity of gaseous Mo species is independent of chloride concentration at fHCl below 0.1 bar, but increases with increasing fHCl above this pressure. The dominant Mo species at fHCl below 0.1 bar is interpreted to be the same as it is in pure water vapour, and to form as a result of the reaction

(A1)     

Note on the isotopic geochemistry of fossil-lacustrine tufas in carbonate plateau—A study from Dungul region (SW Egypt)

Lithological, chemical, and stable isotope data are used to characterize lacustrine tufas dating back to pre-late Miocene and later unknown times, capping different surfaces of a Tertiary carbonate (Sinn el-Kedab) plateau in Dungul region in the currently hyperarid south-western Egypt. These deposits are composed mostly of calcium carbonate, some magnesium carbonate and clastic particles plus minor amounts of organic matter. They have a wide range of (Mg/Ca)_molar ratios, from 0.03 to 0.3. The bulk-tufa carbonate has characteristic isotope compositions: (δ¹³C_mean = −2.49 ± 0.99‰; δ¹⁸O_mean = −9.43 ± 1.40‰). The δ¹³C values are consistent with a small input from C4 vegetation or thinner soils in the recharge area of the tufa-depositing systems. The δ¹⁸O values are typical of fresh water carbonates. Covariation between δ¹³C and δ¹⁸O values probably is a reflection of climatic conditions such as aridity. The tufas studied are isotopically similar to the underlying diagenetic marine chalks, marls and limestones (δ¹³C_mean = −2.06 ± 0.84‰; δ¹⁸O_mean = −10.06 ± 1.39‰). The similarity has been attributed to common meteoric water signatures. This raises large uncertainties in using tufas (Mg/Ca)_molar, δ¹³C and δ¹⁸O records as proxies of paleoclimatic change and suggests that intrinsic compositional differences in material sources within the plateau may mask climatic changes in the records.