重磁电(井)震综合物探技术在识别达巴松凸起石炭系深部火山岩中的应用

近年来, 准噶尔盆地石炭系火山岩勘探屡获突破, 展现了火山岩储层良好的勘探前景。由于准噶尔盆地石炭系火山岩存在埋藏深度大, 受勘探手段和地球物理资料品质等因素的制约, 深层火山岩的识别与解释目前仍存在诸多困难和问题, 为油田地震勘探工作带来了极大困难。如何通过现有物探方法和技术提高深部火山岩的分辨、识别能力, 具有很强的理论和实际意义。由于特殊地质体在密度、磁化率或电阻率等物性组合方面存在特殊性, 因此可通过多方法综合物探技术对其进行综合识别、限定。本文在深入分析达巴松凸起钻井、物性资料的基础上, 利用重磁电异常信息模式判别技术, 预测了石炭系火山岩的平面展布, 缩小和锁定了深层火山岩地震勘探的有利靶区; 再以地震相分析、地震属性解释、构造制图及综合评价为主要技术手段, 对深层火山岩进行定量识别和预测, 落实和优选了深层火山岩有利勘探目标, 并取得了良好效果。总结了深层特殊地质体勘探的高精度地震资料采集和重磁电震(井)综合应用、联合反演解释等手段, 极大地提高了准噶尔盆地深层火成岩的勘探精度。     

广西南宁盆地下第三系地震年代地层学研究

地震反射追随年代地层的对比关系,使得地震反射对比关系具有年代地层学意义,本文论述地震反射界面的年代地层学意义,介绍层序年代剖面图的制作方法,并以广西南宁盆地下第三系地震年代地层学研究为例,对层序年代进行了推断。     

渤海湾盆地辽东湾地区古近系地震相研究

对辽东湾地区古近系地层进行了研究,选择了可信度较高的地震反射内部结构和外部形态,辅助地震反射振幅、连续性等参数,对地震相进行了划分命名。在研究区6个地震层序中共识别出平行—亚平行席状地震相、前积地震相、楔状地震相、充填状地震相、透镜状地震相、丘状地震相及乱岗状地震相等多种类型。这些地震相在平面分布上具有差异性,在垂向演化上具有继承性。将地震相转变为沉积相,划分出了湖泊沉积环境的深湖—半深湖、滨浅湖、扇三角洲、近岸水下扇、三角洲、浊积扇等沉积相,预测出了有利沉积相带。     

西南地区地震滑坡坡度分布特征研究

西南是我国地震滑坡多发区。根据汶川地震、庐霍地震、松潘一平武地震和昭通地震诱发的典型地震滑坡的调查和资料分析,结果表明不同地震诱发的滑坡坡度频率分布存在一定的差异,而地震滑坡与降雨滑坡坡度频率分布的差异较大,其分布规律遵循Logistic分布。通过Logistic分布函数分别建立了典型地震滑坡和区域地震滑坡坡度分布的定量评价方法,可为滑坡影响因子的定量计算、评价提供参考。     

Seismotectonic features of the September 24, 1999 Ahram earthquake in the Zagros,Iran

The September 24, 1999 Ahram Earthquake in southwestern Iran was moderate in energy (M = 5.0–5.5 from different sources) and did not entail significant destruction and casualities. The tectonic position of the source zone, surficial seismic dislocations, and results of macroseismic and seismological study of this seismic event in the junction zone of the Zagros Fold System and the piedmont plain are described in the paper, including data on rejuvenated ancient ruptures exposed in two trenches excavated across the strike of the regional Kazerun-Borazjan Fault. One of the trenches was driven a few months before and the other a year after this seismic event. The conclusion is drawn that new deformations in the Quaternary near-surface sediments observed at the walls of both trenches may be regarded as unusual seismic ruptures of the Ahram earthquake. These ruptures, described as proved primary seismic dislocations of such a moderate seismic event, are a unique phenomenon in the world seismotectonic practice. The localization of the earthquake source zone in the Kazerun-Borazjan Fault Zone with complex kinematics makes it possible to study the internal structure of one of the most important tectonic lines of the Zagros Fold Region.     

长白山火山活动状态分析

长白山天池火山自1985年起每年6～9月开展季节性地震观测。1985～1994年平均每年记录到的火山地震在40次以内。从2002年7月开始,长白山天池火山地震数量明显增加,2003年发生1293次地震,2004年虽然地震数量略有下降,但是能量释放持续增强。近年来,长白山周边地区地震活动明显增强,2004年12月和2005年4月在距离长白山天池30多公里的抚松县发生了4.4级和4.0级构造地震。长白山附近发生了多次地震和火山震,天池口附近有强烈震感,可听到地声,并造成轻微震害。2005年8月以后火山地震渐趋平静,逐渐恢复到2002年以前的地震活动水平。本文对长白山火山地震监测的现状和监测能力进行了讨论,并从基本的观测事实出发分析研究了长白山天池火山近年来的活动水平,对其目前的活动现状态进行了初步分析。     

尼日尔Termit盆地上白垩统Madama组地震相识别与沉积相演化分析

以层序地层学及沉积学理论为指导,综合运用测井、录井以及地震资料,将尼日尔Termit盆地上白垩统Madama组划分为一个三级层序(MS),并进一步识别出低位体系域、海侵体系域以及高位体系域。在等时层序地层格架内,识别出前积反射地震相、河道充填反射地震相、平行-亚平行反射地震相以及杂乱反射地震相等四种类型,并识别出辫状河三角洲的沉积相类型。认为层序MS的低位体系域主要发育辫状河三角洲前缘亚相,高位体系域则主要发育辫状河三角洲平原亚相。Madama组整体表现为一个海退的沉积演化过程。     

永夏城郊矿三维地震资料解释方法应用实例

以永夏矿区城郊矿三维地震资料解释为例,论述了利用方差体解释技术、道积分解释技术、三维可视化解释技术、地震反演技术及断层解释方法与沿层地震属性分析技术等三维地震资料解释技术在煤矿采区三维地震资料解释中的应用,明显提高了地震地质的解释精度,丰富了地质资料的信息,为采矿工作面的合理布置提供了可靠的依据。     

山东郯城麦坡中更新世地震事件记录*

山东郯城麦坡被命名为典型地震活动断层遗址,其最醒目的标志是郯庐断裂带主干断层(F₂)东盘的紫灰色下白垩统逆冲到断层西盘的红棕色第四系之上且界线截然。野外调查和试验分析表明,郯城麦坡第四系于泉组中发育液化砂涌管、液化砂脉、震裂缝充填构造和同沉积断层等地震引发的软沉积物变形构造——地震事件记录。根据软沉积物变形构造的砂质黏土光释光测年分析,推断这些软沉积物变形构造所记录的地震事件属郯庐断裂带主干断层F₂在中更新世晚期发生的强构造与地震活动。这些地震事件记录为研究郯庐断裂带新构造运动与地震活动提供了新资料,也丰富了该地震活动断层遗址的内涵。     

Co‐seismic Faults and Geological Hazards and Incidence of Active Fault of Wenchuan Ms 8.0 Earthquake,Sichuan, China

Abstract: There are two co-seismic faults which developed when the Wenchuan earthquake happened. One occurred along the active fault zone in the central Longmen Mts. and the other in the front of Longmen Mts. The length of which is more than 270 km and about 80 km respectively. The co-seismic fault shows a reverse flexure belt with strike of N45°–60°E in the ground, which caused uplift at its northwest side and subsidence at the southeast. The fault face dips to the northwest with a dip angle ranging from 50° to 60°. The vertical offset of the co-seismic fault ranges 2.5–3.0 m along the Yingxiu-Beichuan co-seismic fault, and 1.5–1.1 m along the Doujiangyan-Hanwang fault. Movement of the co-seismic fault presents obvious segmented features along the active fault zone in central Longmen Mts. For instance, in the section from Yingxiu to Leigu town, thrust without evident slip occurred; while from Beichuan to Qingchuan, thrust and dextral strike-slip take place. Main movement along the front Longmen Mts. shows thrust without slip and segmented features. The area of earthquake intensity more than IX degree and the distribution of secondary geological hazards occurred along the hanging wall of co-seismic faults, and were consistent with the area of aftershock, and its width is less than 40km from co-seismic faults in the hanging wall. The secondary geological hazards, collapses, landslides, debris flows et al., concentrated in the hanging wall of co-seismic fault within 0–20 km from co-seismic fault.     

Assessment of seismic risk scenarios for Bucharest,Romania

In this paper, seismic risk scenarios for Bucharest, the capital city of Romania, are proposed and assessed. Bucharest has one of the highest seismic risk levels in Europe, and this is due to a combination of relatively high seismic hazard and a building stock built mainly before the devastating Vrancea 1977 earthquake. In this study, the seismic risk of Bucharest is assessed using the most recent information regarding the characteristics of the residential building stock. The ground motion amplitudes are evaluated starting from random fields obtained by coupling a ground motion model derived for the Vrancea intermediate-depth seismic source with a spatial correlation model. The seismic risk evaluation method applied in this study is based on the well-known macroseismic method. For several structural typologies, the vulnerability parameters are evaluated based on a damage survey performed on 18,000 buildings in Bucharest after the March 1977 earthquake. Subsequently, the risk metrics are compared with those from other studies in the literature that apply a different risk assessment methodology in order to gain a better view of the uncertainties associated with a seismic risk study at city level. Finally, the impact of several Vrancea intermediate-depth earthquake scenarios is evaluated and the results show that the earthquake which has the closest epicenter to Bucharest appears to be the most damaging.

     

Assessment of seismic risk scenarios for Bucharest,Romania

In this paper, seismic risk scenarios for Bucharest, the capital city of Romania, are proposed and assessed. Bucharest has one of the highest seismic risk levels in Europe, and this is due to a combination of relatively high seismic hazard and a building stock built mainly before the devastating Vrancea 1977 earthquake. In this study, the seismic risk of Bucharest is assessed using the most recent information regarding the characteristics of the residential building stock. The ground motion amplitudes are evaluated starting from random fields obtained by coupling a ground motion model derived for the Vrancea intermediate-depth seismic source with a spatial correlation model. The seismic risk evaluation method applied in this study is based on the well-known macroseismic method. For several structural typologies, the vulnerability parameters are evaluated based on a damage survey performed on 18,000 buildings in Bucharest after the March 1977 earthquake. Subsequently, the risk metrics are compared with those from other studies in the literature that apply a different risk assessment methodology in order to gain a better view of the uncertainties associated with a seismic risk study at city level. Finally, the impact of several Vrancea intermediate-depth earthquake scenarios is evaluated and the results show that the earthquake which has the closest epicenter to Bucharest appears to be the most damaging.     

台湾南投、台中地震速报技术研究

本文通过分析南投、台中地震的波形记录及各定位参数 ,总结出该地区的震相特征和各台的震级情况 ,结合地震速报的规程 ,提出了对这两个地区地震速报的建议。     

Application of seismic velocity tomography in investigation of karst collapse hazards,Guangzhou, China

This paper describes seismic velocity tomography applied to the investigation and assessment of karst collapse hazards to facilitate accurate characterization of geological conditions of karst sinkhole formation. In the survey areas of Xiamao, Guangzhou, China, and Huangchi, Foshan, China, seismic velocity tomography was used to explore the structures of rock and soil associated with karst collapse. The results show that sand intercalated with clay or clay intercalated with soft soil dominates the cover of these two areas. The overburden is 20–33 m thick and underlain by Carboniferous limestone. In the limestone, there are well-developed karst caves and cracks as well as highly fluctuating bedrock surfaces. The seismic velocities are less than 2500 m/s in the cover, 2500–4500 m/s in the karst fracture zones and caves of Xiamao, and 1500–2000 m/s in the Huangchi collapse area. The karst fracture zones, relief of bedrock surfaces, and variations of soil thicknesses revealed by seismic velocity tomography are well constrained and in agreement with those in the drilling borehole profiles. This paper demonstrates that seismic velocity tomography can delineate anomalies of rock and soil with the advantages of speed, intuitive images, and high resolution.     

福州、小陶地震速报技术研究

本文通过分析福州、小陶地震的波形记录及各种定位参数 ,总结了该地区的震相特征和各台的震级情况 ,结合地震速报的规程 ,提出了对这两个地区地震速报的建议。     

Development of a geotechnical and geophysical database for seismic zonation of the Ankara Basin,Turkey

Engineering geological and geotechnical site characteristics were assessed and seismic hazard studies performed for the Upper Pliocene to Pleistocene fluvial and Quaternary alluvial and terrace deposits for a site west of Ankara, Turkey. Sediment conditions were determined and a soil profile was characterized by surface geophysical methods. These studies were integrated with existing in-situ characterization studies to create a seismic and geotechnical database for the site. A seismic zonation map of the site was then prepared. Site classification systems were assigned to account for site effects in relation to seismic hazard assessments. The consequences of the seismic hazards were investigated and recommendations were presented.     

三维地震勘探技术在新疆沙吉海井田中的应用

针对沙吉海井田以往未开展过地震勘探,煤层多、局部间距小特点,介绍了研究区主要地震反射波与煤层对应关系.通过对T13、T12、T10、T6反射波研究,采用地震波阻抗反演技术对该区煤层厚度及煤层结构进行解释,查明井田构造形态和主要煤层赋存变化特征,取得了较好地震勘探效果.     

An integrated multi-scale 3D seismic model of the Archaean Yilgarn Craton, Australia

The collection of a range of different seismic data types has greatly improved our understanding of the crustal architecture of Australia's Archaean Yilgarn Craton over the last few years. These seismic data include broadband seismic studies, seismic receiver functions, wide-angle recordings and mine-scale to deep seismic reflection transects. Each data set provides information on the three-dimensional (3D) tectonic model of the Yilgarn Craton from the craton scale through to the mine scale. This paper demonstrates that the integration and rationalisation of these different seismic data sets into a multi-scale 3D geological/seismic model, that can be visualised at once in a single software package, and incorporating all available data sets, significantly enhances this understanding. This enhanced understanding occurred because the integrated 3D model allowed easy and accurate comparison of one result against another, and facilitated the integrated questioning and interrogation across scales and seismic method. As a result, there are feedback questions regarding understanding of the individual seismic data sets themselves, as well as the Yilgarn Craton as a whole.The methodology used, including all the data sets in the model range, had to allow for the wide range of data sets, frequencies and seismic modes. At the craton scale, P-wave, S-wave and surface wave variations constrained the 3D lithospheric velocity model, revealing noticeable large-scale velocity variations within and across the craton. An interesting feature of the data, easily identified in 3D, is the presence of a fast S-wave velocity anomaly (> 4.8 km s^− 1) within the upper mantle. This velocity anomaly dips east and has a series of step-down offsets that coincide approximately with province and terrane boundaries of the Yilgarn Craton.One-dimensional receiver function profiles show variations in their crustal velocity across the craton. These crustal velocity variations are consistent with the larger-scale geological subdivision of the craton, and provide characteristic profiles for provinces and terranes. The receiver function results and the deep seismic reflection data both agree on the depth to the Moho, and both indicate an increase in Moho depth to the east. The 2D seismic refraction results in the south-west of the craton provide crustal thickness information, an indication of middle and lower crustal compositions, and information regarding the broad-scale architectural framework.At the province- and terrane-scale, the deep seismic reflection data and the mine-scale seismic data provide geometric constraints on crustal architecture, in particular the orientation of the region's fault systems as well as variations in the thickness of the granite–greenstone succession. Integration of the results from wide-angle seismic refraction data coincident with the deep seismic reflection data provided additional constraints on likely upper crustal lithologies.The integrated 3D seismic model implies the dominant geodynamic process involved the development of an orogenic belt that developed with a series of contractional (folding and thrusting) events, separated by equally important extensional events. The seismic reflection data in particular suggests that extensional movement on many shear zones was more common than previously thought.The seismic reflection data suggest that the dominant mineral systems involved deeply sourced fluid flowing up crustal-penetrating shear zones. These deeply sourced fluids were further focussed into sites located above fault-breached domal regions in the upper crust.     

Seismogenic Origin of the Ancient Avdat Ruins,Negev Desert,Israel

The present communication addresses the potential use of damage features, observed in the ancient ruins of the Avdat archeological site (Negev Desert, Israel) as a tool to identify the seismic origin of the destruction there and roughly to determine the direction of seismic wave propagation. This revised version was published online in June 2006 with corrections to the Cover Date.     

Abu Roash G dolomite reservoir characterization using seismic inversion technique, Horus field, Western Desert, Egypt

The main objective of this paper was the characterization of the reservoir (Abu Roash G dolomite) in terms of acoustic impedance from surface seismic data complemented by available well logs. To reach our target, a two-step procedure was followed: first, identification of the reservoir signatures using synthetic seismogram using Strata program in Hampson–Russell software and second, applying inversion technique to the post-stack seismic data using Strata program in Hampson–Russell software to obtain acoustic impedance profiles and maps. This procedure was applied to 12 3D seismic lines (six cross-lines, and six in-lines) from Horus field in Western Desert in Egypt after converting them from analog state to SEGY format by vectorization. Five wells had been used in this study. The outcome of this paper is an improved subsurface image of seismic data and achieving the reservoir characterization in a good way.