柴达木盆地西北缘现代冲积扇沉积特征及石油地质意义

柴达木盆地处于古亚洲构造域和特提斯－喜马拉雅构造域的结合部，构造应力大而复杂，导致盆内地势起伏大，加上西南暖湿气流受喜马拉雅山系阻隔难以进入境内，盆内气候干旱，最终导致盆地内冲积扇极为发育。通过对大柴旦地区大头羊煤矿、鱼卡河、波门河和八里沟四个冲积扇的实地考察，共观测到3个亚相8个微相：扇根亚相沉积物最粗，分为古沟道、主水道和主水道间微相；扇中亚相沉积物偏细，成熟度增高，分为辫状水道、辫状水道间和纵坝微相；扇缘亚相沉积物最细，流体能量最低，分为水道径流和片流微相。不同沉积微相其沉积特征差异较大，认为古沟道、主水道和辫状水道微相具有较好的储集性能。勘探表明，冲积扇沉积与储层有着密切的关系，其内形成的油藏具有“自我保护”的能力；另外，冲积扇的形成很可能导致上覆地层形成扇背斜油藏，也可能导致下伏基岩形成基岩风化壳油藏。     

扇三角洲砂砾岩储层沉积特征及与储层物性的关系——以罗家油田沙四段砂砾岩体为例

从岩心和各类薄片资料入手，以沉积学和储层地质学为基础，结合各类分析资料，对山东沾化凹陷罗家油田沙四段砂砾岩体储层的沉积特征进行了研究。前人所提出的水下冲积扇和近岸水下扇沉积的认识，忽视了扇形沉积体的水上部分，因而改为扇三角洲沉积更为合适。扇三角洲沉积可进一步细分为扇三角洲平原、扇三角洲前缘和前扇三角洲三个沉积亚相及五个微相，其中水下分流河道沉积微相的储层最为发育。详细阐述了砂砾岩体的岩性、沉积微相等沉积因素对储层物性的影响，其中粒度对砂砾岩储层物性与对砂岩储层物性的影响明显不同。     

扇三角洲砾砾岩储层沉积特征及与储层物性的关系—以罗家油田沙四段砂砾岩体为例

从岩心和各类薄片资料入手，以沉积物和储层地质学为基础，结合各类分析资料，对山东沾化凹陷罗家油田沙四段砂砾岩体储层的沉积特征进行了研究。前人所提出的水下冲积扇和近岸水下扇沉积的认识，忽视了扇形沉积体的水上部分，因而改为扇三角洲沉积更为适合。扇三角洲沉积可进一步细分为扇三角洲平原、扇三角洲前缘和前扇三角洲三个沉积相及五个微相，其中水下分流河道沉积微相的储层最为发育。详细阐述了砂砾岩体的岩性、沉积微相等沉积因素对储层物性的影响，其中粒度对砂砾岩储层特性与对砂岩储层物性的影响明显不同。     

西藏南部羊卓雍措地区晚侏罗世维美组沉积特征及环境演化

通过沉积岩石学、岩相学、粒度分析等研究方法,对维美组沉积特征、沉积环境及演化提出新的认识和探讨。晚侏罗世维美组主要为一套陆源碎屑物质沉积,沉积期共经历4个沉积旋回,每个沉积旋回的岩石组合大致为含砾石英砂岩-中、粗粒石英砂岩-细粒石英砂岩(长石石英砂岩)-粉砂岩(泥岩、页岩),由底到顶粒度变细,层厚减薄。识别出6种岩相类别:含砾石英砂岩、石英砂岩、长石石英砂岩、泥质粉砂岩、薄层页岩-泥岩互层;发现平行层理、水平层理、粒序层理和重荷模等沉积构造;识别出陆棚、滨岸和陆棚下切河道3类沉积相,其中陆棚相包括内陆棚和外陆棚亚相,滨岸相包括近滨上部和近滨下部亚相;陆棚下切河道充填结构大致为:下部河道砂砾岩层,中部不等粒长石砂岩、杂砂岩层,上部细粒石英砂岩、泥岩层。综合来看,维美组沉积环境为位于克拉通边缘上浅海环境,沉积物质及沉积序列受海平面升降变化影响显著,主要形成于全球海平面下降之后上升的阶段。     

Architecture and evolution of the Paine channel complex, Cerro Toro Formation (Upper Cretaceous), Silla Syncline, Magallanes Basin, Chile

The Upper Cretaceous Cerro Toro Formation in the Silla Syncline, Parque Nacional Torres del Paine, Magallanes Basin, Chile, includes over 1100 m of mainly thin‐bedded mud‐rich turbidites containing three thick divisions of coarse conglomerate and sandstone. Facies distributions, stacking patterns and lateral relationships indicate that the coarse‐grained sandstone and conglomerate units represent the fill of a series of large south to south‐east trending deep‐water channels or channel complexes. The middle coarse division, informally named the Paine member, represents the fill of at least three discrete channels or channel complexes, termed Paine A, B and C. The uppermost of these, Paine C, represents a channel belt about 3·5 km wide and its fill displays explicit details of channel geometry, channel margins, and the processes of channel development and evolution. Along its northern margin, Paine C consists of stacked, laterally offset channels, each eroded into fine‐grained mudstone and thin‐bedded sandy turbidites. Along its southern margin, the Paine C complex was bounded by a single, deeply incised but stepped erosional surface. The evolution of the Paine C channel occurred through multiple cycles of activity, each involving: (i) an initial period of channel erosion into underlying fine‐grained sediments; (ii) deposition of coarse‐grained pebble to cobble conglomerate and sandstone within the channel; and (iii) waning of coarse sediment deposition and accumulation of a widespread sheet of fine‐grained, thin‐bedded turbidites inside and outside the channel. The thin‐bedded turbidites deposited within, and adjacent to, the channel along the northern margin of the Paine C complex do not appear to represent levée deposits but, rather, a separate fine‐grained turbidite system that impinged on the Paine C channel from the north. The Cerro Toro channel complex in the Silla Syncline may mark either an early axial zone of the Magallanes Basin or a local slope mini‐basin developed behind a zone of slope faulting and folding now present immediately east of the syncline. If the latter, flows moving downslope toward the basin axis further east were diverted to the south by this developing structural high, deposited part of their coarse sediment loads, and exited the mini‐basin at a point located near the south‐eastern edge of the present Silla Syncline.     

珠江口盆地荔湾3-1气田珠江组深水扇沉积相分析

根据已钻井取芯段岩相分析,从荔湾3-1气田珠江组深水扇沉积体系中划分出巨厚层和厚层块状砂岩相、厚层正粒序砂岩相、厚层逆粒序砂岩相、平行—板状斜层理砂岩相、滑塌变形砂岩相、薄层砂岩夹层相、薄层（粉）砂岩与泥岩互层相、厚层粉砂岩相、厚层泥岩相和层状深水灰岩相等10种岩相类型和识别出砂岩相组合、泥岩相组合、（粉）砂岩与泥岩互...     

南襄盆地泌阳凹陷深凹区核三段沉积特征及演化

通过测井、录井、粒度分析资料,结合区域地质资料、前人研究成果、岩心描述和地震反射资料,认为核三段发育辫状河三角洲、近岸水下扇、滑塌浊积扇及湖泊沉积,并进一步识别出5个亚相及6个微相。其中,近岸水下扇发育于研究区西南部和东南部的控边断层处,辫状河三角洲发育于东北部,滑塌浊积扇发育于辫状河三角洲前端的半深湖-深湖区域。近岸水下扇岩性主要为灰白色中、细砾岩,砾石成分复杂,分选差,磨圆程度低。辫状河三角洲发育平行层理、交错层理及冲刷充填构造,垂向上构成间断正韵律,其岩性为浅灰色砾岩、砾质砂岩、砂岩,中-厚层或块状,自然电位曲线和电阻率曲线呈钟形或箱型。辫状河三角洲前缘砂体失稳,产生滑塌,在深湖区形成滑塌浊积扇,其岩性为细砂岩、粉砂岩、泥质粉砂岩,多呈正韵律,发育块状层理、液化变形层理、波状层理及泥岩撕裂屑、槽模、沟模构造等,电测曲线表现为钟形、箱形、漏斗形等。湖泊沉积主要发育于三角洲前缘和近岸水下扇前方的深凹区。从H38-H31研究区经历了水体由深到浅再略加深的沉积演化。     

孙吴-嘉荫盆地白垩系淘淇河组水下重力流沉积特征

本文根据露头、岩心、测井、薄片鉴定等资料,对孙吴-嘉荫盆地白垩系淘淇河组水下重力流沉积特征进行了详细的研究,认为淘淇河组水下重力流沉积规模大,为湖底扇沉积,其可进一步划分为内扇、中扇、外扇3种亚相以及主沟道、主沟道外、辫状沟道、辫状沟道间、远源浊积岩5种微相类型。内扇以水下泥石流沉积为主,中扇以液化沉积物流和浊流沉积为主,外扇发育浊积岩。根据地震剖面推断,白垩系淘淇河组时期发生的断层活动是湖底扇沉积发育的主要原因。     

Architecture of an Oligocene fluvial ribbon sandstone in the Ebro Basin,North‐eastern Spain

Fluvial ribbon sandstone bodies are ubiquitous in the Ebro Basin in North‐eastern Spain; their internal organization and the mechanics of deposition are as yet insufficiently known. A quarrying operation in an Oligocene fluvial ribbon sandstone body in the southern Ebro Basin allowed for a three‐dimensional reconstruction of the sedimentary architecture of the deposit. The sandstone is largely a medium‐grained to coarse‐grained, moderately sorted lithic arenite. In cross‐section, the sandstone body is 7 m thick, occupies a 5 m deep incision and wedges out laterally, forming a ‘wing’ that intercalates with horizontal floodplain deposits in the overbank region. Three architectural units were distinguished. The lowest and highest units (Units A and C) mostly consist of medium‐grained to coarse‐grained sandstone with medium‐scale trough cross‐bedding and large‐scale inclined stratasets. Each of Units A and C comprises a fining‐up stratal sequence reflecting deposition during one flood event. The middle unit (Unit B) consists of thinly bedded, fine‐grained sandstone/mudstone couplets and represents a time period when the channel was occupied by low‐discharge flows. The adjoining ‘wing’ consists of fine‐grained sandstone beds, with mudstone interlayers, correlative to strata in Units A and C in the main body of the ribbon sandstone. In plan view, the ribbon sandstone comprises an upstream bend and a downstream straight reach. In the upstream bend, large‐scale inclined stratasets up to 3 m in thickness represent four bank‐attached lateral channel bars, two in each of Units A and C. The lateral bars migrated downflow and did not develop into point bars. In the straight downstream reach, a tabular cross‐set in Unit A represents a mid‐channel transverse bar. In Unit C, a very coarse‐grained, unstratified interval is interpreted as deposited in a riffle zone, and gives way downstream to a large mid‐channel bar. The relatively simple architecture of these bars suggests that they developed as unit bars. Channel margin‐derived slump blocks cover the upper bar. The youngest deposit is fine‐grained sandstone and mudstone that accumulated immediately before avulsion and channel abandonment. Deposition of the studied sandstone body reflects transport‐limited sediment discharges, possibly attaining transient hyperconcentrated conditions.     

Stratigraphic architecture and depositional setting of the coarse‐grained Upper Cambrian Owen Conglomerate,West Coast Range,western Tasmania

The Upper Cambrian Owen Conglomerate of the West Coast Range, western Tasmania, comprises two upward‐fining successions of coarse‐grained siliciclastic rocks that exhibit a characteristic wedge‐shaped fill controlled by the basin‐margin fault system. Stratigraphy is defined by the informally named basal lower conglomerate member, middle sandstone member, middle conglomerate member and upper sandstone member. The lower conglomerate member has a gradational basal contact with underlying volcaniclastics of the Tyndall Group,while the upper sandstone member is largely conformable with overlying Gordon Group marine clastics and carbonates. The lower conglomerate member predominantly comprises high flow regime, coarse‐grained, alluvial‐slope channel successions, with prolonged channel bedload transport exhibited by the association of channel‐scour structures with upward‐fining packages of pebble, cobble and boulder conglomerate and sandstone, with abundant large‐scale cross‐beds derived from accretion in low‐sinuosity, multiply active braided‐channel complexes. While the dipslope of the basin is predominantly drained by west‐directed palaeoflow, intrabasinal faulting in the southern region of the basin led to stream capture and the subsequent development of axial through drainage patterns in the lower conglomerate member. The middle sandstone member is characterised by continued sandy alluvial slope deposition in the southern half of the basin, with pronounced west‐directed and local axial through drainage palaeoflow networks operating at the time. The middle sandstone member basin deepens considerably towards the north, where coarse‐grained alluvial‐slope deposits are replaced by coarse‐grained turbidites of thick submarine‐fan complexes. The middle conglomerate member comprises thickly bedded, coarse‐grained pebble and cobble conglomerate, deposited by a high flow regime fluvial system that focused deposition into a northern basin depocentre. An influx of volcanic detritus entered the middle conglomerate member basin via spatially restricted footwall‐derived fans on the western basin margin. Fluvial systems continued to operate during deposition of the upper sandstone member in the north of the basin, facilitated by multiply active, high flow regime channels, comprising thick, vertically stacked and upward‐fining, coarse‐grained conglomerate and sandstone deposits. The upper sandstone member in the south of the basin is characterised by extensive braid‐delta and fine‐grained nearshore deposits, with abundant bioturbation and pronounced bimodal palaeocurrent trends associated with tidal and nearshore reworking. An increase in base‐level in the Middle Ordovician culminated in marine transgression and subsequent deposition of Gordon Group clastics and carbonates.     

重庆北碚河西洞上三叠统须家河组一段上部剖面沉积相分析

对重庆北碚上三叠统须家河组一段地层特征、岩性特征、沉积相及演化规律进行了系统研究。研究区须一段以灰色、褐灰色细砂岩及深灰色、灰黑色页岩、粉砂质泥（页）岩夹薄煤层为主,见炭化植物碎片及菱铁矿结核,砂岩类型主要为长石岩屑石英砂岩及长石岩屑砂岩,大型槽状交错层理、平行层理、水平层理及沙纹层理发育。综合分析认为研究区须一段属浅水三角洲沉积环境,包括三角洲平原、三角洲前缘和前三角洲3种亚相,可进一步划分出水上（水下）分支河道、沼泽、支流间湾、河口砂坝等沉积微相。其垂向序列反映了沉积环境三角洲平原-三角洲前缘-前三角洲-三角洲平原的演化过程。     

Late Ordovician stratigraphy,zircon provenance and tectonics,Lachlan Fold Belt,southeastern Australia

Ordovician quartz turbidites of the Lachlan Fold Belt in southeastern Australia accumulated in a marginal sea and overlapped an adjoining island arc (Molong volcanic province) developed adjacent to eastern Gondwana. The turbidite succession in the Shoalhaven River Gorge, in the southern highlands of New South Wales, has abundant outcrop and graptolite sites. The succession consists of, from the base up, a unit of mainly thick‐bedded turbidites (undifferentiated Adaminaby Group), a unit with conspicuous bedded chert (Numeralla Chert), a unit with common thin‐bedded turbidites (Bumballa Formation (new name)) and a unit of black shale (Warbisco Shale). Coarse to very coarse sandstone in the Bumballa Formation is rich in quartz and similar to sandstone in the undifferentiated Adaminaby Group. Detrital zircons from sandstone in the Bumballa Formation, and from sandstone at a similar stratigraphic level from the upper Adaminaby Group of the Genoa River area in eastern Victoria, include grains as young as 453–473 Ma, slightly older than the stratigraphic ages.The dominant detrital ages are in the interval 500–700 Ma (Pacific Gondwana component) with a lessor concentration of Grenville ages (1000–1300 Ma). This pattern resembles other Ordovician sandstones from the Lachlan Fold Belt and also occurs in Triassic sandstones and Quaternary sands from eastern Australia. The Upper Ordovician succession is predominantly fine grained, which reflects reduced clastic inputs from the source in the Middle Cambrian to earliest Ordovician Ross‐Delamerian Fold Belts that developed along the eastern active margin of Gondwana. Development of subduction zones in the Late Ordovician marginal sea are considered to be mainly responsible for the diversion of sediment and the resulting reduction in the supply of terrigenous sand to the island arc and eastern part of the marginal sea.     

乌里雅斯太凹陷斜坡带湖底扇相砾岩体沉积特征与隐蔽油藏勘探

乌里雅斯太凹陷南洼槽斜坡带发育一套厚度大、粒级粗和相变快的砾岩体,根据岩心观察、岩电组合特征和地震相分析等手段,结合岩矿等分析化验资料,认为该套砾岩体属具补给水道的湖底扇相沉积。砾岩体夹于较深湖亚相的深灰色泥岩中,发育沉积物重力流成因的沉积构造,内扇、中扇和外扇等相带发育齐全,并具有多期发育的特点。物源区具有的线物源或多物源特征,以及极粗的粒级造成补给水道的稳定性较差、规模较小、迁移性较强,沿斜坡带形成了纵向上由南向北依次叠置、横向上叠加连片的多个湖底扇相砾岩体。坡度很陡的斜坡,特别是构造坡折带的存在控制了湖底扇的形成和发育,使湖底扇相砾岩体主要沿构造坡折带下部分布,具有很好的隐蔽油藏成藏条件,以中扇辫状沟道微相区最为有利,已有多口井发现厚油层并获工业油流,实现了隐蔽油藏勘探的重大突破。     

胜利油田渤南洼陷古近系沙河街组沉积相

渤南洼陷古近系沙河街组为一套冲积－湖泊沉积，由曲流河三角洲相、辫状河三角洲相、扇三角洲相、水下扇相和湖泊相组成，可分出14个亚相，35个微相，其中辫状河三角洲最发育，其特征显著，明显有别于其它四种类型的三角洲。研究区辫状河三角洲由辫状河三角洲前缘及前三角洲构成，辫状河三角洲前缘的主体是由含砂岩及中粗粒砂岩组成的水下分流河道砂坝，三角洲中交错层理发育，其中尤以水道砂坝侧向迁移加积而形成的侧积交错层异常发育为标志。     

濮城油田沙三中亚段水下扇的特征

濮城油田沙三中亚段为水下扇沉积，具牵引流和重力流的双重特征。沉积物粒度较细，以细砂岩和粉砂岩为主。垂向层序为正粒序。沙三中亚段具沟道、沟道间、席状砂和泥石流等微相沉积的特征。     

珠江口盆地白云凹陷晚渐新统-早中新统沉积特征及演化规律

以珠江口盆地白云凹陷钻井、测井、地震和古生物资料为基础,结合前人研究成果,系统的分析了白云凹陷晚渐新统到早中新统沉积相发育特征及凹陷沉积充填演化过程。研究结果表明,珠海组下部发育大型陆架边缘三角洲沉积,地震反射特征表明该三角洲发育三期;钻遇水下分支河道、支流间湾、河口坝及远砂坝微相,沉积物以富砂为特征,发育冲刷-充填构造、递变层理及较粗的水平潜穴等多种构造;珠海组上部为浅海相,沉积物以海相砂泥岩互层为主,此时期陆架坡折带位于白云凹陷南坡;珠江组沉积时期,海平面升降旋回频繁,陆架坡折带迁至凹陷北坡。随着古珠江流域扩大,沉积物输入量增加,在珠江组下部发育了深水扇,沉积物以细-粗砂岩为主,夹少量粉砂岩及深海泥岩,发育颗粒流、液化流、浊流及碎屑流等四种主要的重力流,钻遇内扇水道,中扇废弃水道及水道间漫溢沉积,外扇深海泥沉积;珠江组上部为半深海相,沉积物以深海泥岩为主。      

哈萨克斯坦Marsel探区下石炭统碳酸盐岩微相特征与沉积环境

根据薄片和岩心资料,识别出哈萨克斯坦Marsel探区下石炭统43种微相类型(MF)和10种微相组合样式(MA)。其中,MF1—MF3为灰泥灰岩,形成于外缓坡或局限低能环境;MF4—MF13为粒泥灰岩,形成于内缓坡泻湖—潮缘带、中缓坡或外缓坡环境;MF14—MF20为泥粒灰岩,形成于局限及低能的内缓坡环境;MF21—MF34为颗粒灰/云岩,多形成于内缓坡潮下带—中缓坡浅滩环境;MF35—MF37为晶粒白云岩,形成于蒸发潮坪环境;MF38—MF43为细粒碎屑岩,主要形成于内缓坡—中缓坡环境。微相组合样式主要包括中—外缓坡微相组合(MA2)、中—低能浅滩微相组合(MA1、MA8)、中缓坡混积微相组合(MA5)、中—高能浅滩—潮坪微相组合(MA6、MA7、MA9)、内缓坡泻湖—潮坪微相组合(MA3)、内缓坡碎屑潮坪微相组合(MA4)和混积潮坪微相组合(MA10)。通过亚相和微相组合分析,认为研究区早石炭世属于缓坡型台地沉积模式。杜内阶—维三段早期,相对海平面缓慢—快速上升,总体以内—中缓坡低能局限泻湖—潮坪和中—外缓坡沉积为主;维三段中期—谢尔普霍夫阶期,相对海平面缓慢—快速下降,主要发育内缓坡低能局限泻湖—潮坪和蒸发潮坪沉积,局部地区发育浅滩和混积潮坪沉积。     

安徽绩溪新元古代海底扇沉积环境分析

研究区位于安徽绩溪县杨溪镇,区内主要发育一套新元古代浅变质碎屑岩系,厚度为639.7 m。碎屑岩以泥岩、泥质粉砂岩、砂岩、含砾砂岩和砾岩为主,发育水平层理,粒序层理,韵律层理等沉积构造,可见鲍马层序Ta、Tc、Td、Te段。碎屑组分以跃移组分为主,含量为35%～58%。地层上段厚为254.8 m,包含粉砂岩、泥质粉砂岩和粉砂质泥岩,水平层理和粒序层理发育,为中扇-外扇扇叶沉积,中段厚为192.5 m,主要为细砂岩、粉砂岩和泥质粉砂岩,砂岩条带广泛发育,属于中扇水道沉积,下段厚为192.4 m,为一套砾岩层,砾石分选较差,砾岩层间夹有粉砂质泥岩,为上扇水道滞留沉积。总体上,形成一套退积的海底扇沉积序列。     

Transitional submarine fan deposits from the late Precambrian Kongsfjord Formats submarine fan, NE Finnmark, N. Norway

ABSTRACT Three transitional submarine fan environments are recognized in the late Precambrian, 3-2 km thick Kongsfjord Formation in NE Finnmark, North Norway, namely: (1) middle to outer fan; (2) fan lateral margin, and (3) fan to upper basin-slope deposits. Middle to outer fan deposits have a high proportion of sandstones, typically showing Bouma T _bede with T _a in the thicker beds. Deposition was mainly from sheet flows with rare shallow channels. Middle to outer fan deposits are an association of sandstone packets less than 10 m thick but commonly only a few metres thick, interpreted as channels or lobes. Interchannel and fan fringe deposits occur as discrete packets of beds between the thicker bedded and coarser grained channel or lobe deposits. Fan lateral margin deposits are recognized on the basis of their stratigraphic position adjacent to inner/middle fan deposits. They are characterized by: (a) a relatively high proportion of fine-grained sandstone/siltstone turbidites compared to other major fan environments; (b) relatively small channels oriented at various angles to the regional basin slope; (c) lobes associated with channels, and (d) abundant clastic dykes and other soft-sediment deformation. Fan lateral margin deposits are distinguished from the outer fan/basin plain successions on account of the very high proportion of siltstone turbidites comparable with middle fan inter-channel deposits. Fan to upper basin-slope deposits occur at the top of the formation as an alternation of sandstone turbidites, most of which are laterally discontinuous, and very thin-bedded upper basin-slope siltstones with slide deposits.     

西藏申扎地区拉嘎组岩相/沉积相分析

通过详细测制西藏申扎县扎扛-木纠错石炭二叠系剖面,查明了拉嘎组的岩石类型、组合及沉积环境。申扎地区的拉嘎组是以暗色粉砂岩、泥岩等细碎屑岩背景下,发育若干板状、长透镜状及透镜状粗碎屑岩为特征。大部分粗碎屑岩及部分细碎屑岩的分选及磨圆很差,成熟度极低,岩性显示为杂砾岩、杂砂岩,局部地区见有花岗岩漂砾。研究认为,拉嘎组形成于冰缘解冻并后退状态下的近岸冰海沉积环境,其沉积相类型可以分为分支水道与间湾、水下冰水扇、冰碛物与冰筏、滨岸与内陆棚。鉴于其时代可能为早二叠世Sakmarian期,因此,拉嘎组可能是晚古生代冰期消融的产物。拉嘎组沉积相的识别分析对拉萨地块晚古生代的古环境和古地理有重要意义。