Shocked quartz grains in the polymict breccia of the Granby structure,Sweden–‐Verification of an impact

Abstract— The Middle Ordovician Granby structure in Sweden is generally considered the result of an asteroidal or cometary collision with Earth, although no hard evidence, i.e., shock metamorphic features or traces of the impactor, have been presented to date. In this study, drill core samples of a sedimentary breccia from the Granby structure have been investigated for microscopic shock metamorphic evidence in an attempt to verify the impact genesis of the structure. The finding of multiple sets of decorated planar deformation features (PDFs) in quartz grains in these samples provides unambiguous evidence that the structure is impact derived. Furthermore, the orientation of the PDFs, e.g., ω {101 }, π {101 } and r, z {101 }, is characteristic for impact deformation. The fact that a majority of the PDFs are decorated implies a water‐bearing target. The shocked quartz grains can be divided into two groups; rounded grains found in the breccia matrix likely originated from mature sandstone, and angular grains in fragments from crystalline target rocks. The absence of melt particles provides an estimated maximum shock pressure for the sedimentary derived quartz of 15–20 GPa and the frequency distribution of PDF orientations in the bedrock quartz implies pressures of the order of 10 GPa.     

Planar deformation features in quartz grains from the resurge deposit of the Lockne structure,Sweden

Abstract— Microscopic planar deformation features (PDFs) in quartz grains are diagnostic of shock meta-morphism during hypervelocity impact cratering. Measurements of the poles of sets of PDFs and the optic axis of 25 quartz grains were carried out for a sample of the Loftarsten deposit from the Lockne area, Sweden. The most abundant PDFs observed in the sample from the Lockne area correspond to those found at known impact craters (i.e., ω (1013} and π (1012). This study confirms the previous suggestion that the Lockne structure is an impact crater. The Loftarsten is, therefore, interpreted as the final stage of resurge deposition after a marine impact at Lockne in the Middle Ordovician.     

An experimental study of silver and palladium partitioning between solid and liquid metal,with applications to iron meteorites

Abstract— Solid metal/liquid metal partition coefficients for Ag and Pd were determined experimentally as a function of the S concentration of the metallic liquid. Silver is incompatible in solid metal and strongly sensitive to the S content of the metallic liquid; partition coefficients for Ag decrease more than an order of magnitude with increasing S content of the metallic liquid and can be expressed as: where k(Ag) is the molar solid metal/liquid metal partition coefficient and X_S is the molar S content of the metallic liquid. The partition coefficient of Pd is less variable but changes from modestly incompatible to modestly compatible in solid metal with increasing S content of the metallic liquid: With these new partition coefficients for Pd and a fractional crystallization model, Pd abundance trends recorded in iron meteorite groups are modeled successfully. Measured Ag distribution between troilite-rich nodules and adjacent metal in iron meteorites also agree well with experimental solid metal/liquid metal equilibrium values. However, observed Pd metal/nodule distributions do not agree with experimentally determined partition coefficients, which suggests a more complex history than simple solid metal/liquid metal equilibrium.     

Shock metamorphism investigations of quartz grains in clasts from impact breccia of the Eyreville B drill core,Chesapeake Bay impact structure,USA

Abstract– The Chesapeake Bay impact structure, approximately 85 km in diameter, has been drilled in 2005–2006 at Eyreville (Virginia, USA), to a total depth of 1766 m. In the drill cores, the abundance of shock metamorphosed material is very variable with depth. Shocked mineral and lithic clasts, as well as melt particles, are most abundant in suevitic impact breccia section (1397–1451 m depth). Shocked quartz (i.e., quartz grains with planar fractures and/or planar deformation features) and melt particles, although rare, are also dispersed in the Exmore Formation unit (444–867 m depth). Other lithologies in the Eyreville drill cores show no clear evidence of shock metamorphism. Here, we report on the investigations of 40 samples from the impact breccia section. A total of more than 27,000 quartz grains were examined in about 200 clasts. The abundance of highly shocked clasts tends to decrease with increasing depth. Crystalline clasts derived from the crystalline basement are commonly only slightly shocked (contain generally <10 rel% of shocked quartz grains). The clasts of metamorphosed sediments show a low proportion of shocked quartz grains (mostly <10 rel%). Sedimentary clasts show a wide range of proportions of shocked quartz grains, with several of them being highly shocked clasts (most values between 0 and 40 rel%). Conglomerates show the highest proportion of shocked quartz grains of all types of clasts (up to 83 rel%). Polycrystalline quartz clasts are also commonly highly shocked (contain mostly between 10 and 40 rel% of shocked quartz grains). These hard nonporous clasts are possibly more liable to show evidence of shock. The investigations suggest that the intensity of shock metamorphism is the result of several parameters, such as original position in the target (both horizontal and vertical) and the properties of each lithology (e.g., grain size, porosity, and amount of matrix). According to the universal‐stage investigations, the dominant orientations of planar deformation features in quartz are , , and also .     

UNUSUAL WEATHERING PRODUCTS OF OLDHAMITE PARENTAGE IN THE NORTON COUNTY ENSTATITE ACHONDRITE

White, pale-yellow and brown deposits occur on surfaces of fragments of the Norton County enstatite achondrite. X-ray powder analysis of these materials indicates that they consist of several calcium-bearing minerals: portlandite [Ca(OH)₂], vaterite (CaCO₃, hexagonal), calcite (CaCO₃, trigonal) and bassanite (CaSO₄-1/2 H₂O). We suggest that these minerals formed by weathering of oldhamite (CaS), which we found to occur in Norton County. The occurrence of portlandite suggests that at low temperatures and in the terrestrial environment, hydrolysis of oldhamite is the most important first step in the weathering sequence. Subsequent carbonation of portlandite is thought to produce vaterite, and vaterite in turn might transform into calcite. Thus, we suggest a weathering sequence in the terrestrial environment of oldhamite portlandite vaterite calcite. The mineral bassanite is clearly also a terrestrial weathering product but its precise mode of origïn is somewhat uncertain: in the system CaSO₄-H₂O, bassanite forms from gypsum at about 100 °C (an unlikely high T for the weathering environment of Norton County).     

Geochemical signals of the late Jurassic,marine Mjølnir impact

Abstract— Of the only seven submarine impact craters that have been found globally, the Mjølnir crater is one of the best preserved and retains crater and ejecta. Geochemical studies (organic pyrolysis using the Rock Eval technique and XRF analysis for major, minor, and trace elements) of the Institute for Petroleum Research (IKU) core 7430/10-U-01 that was taken from a drillhole located ～30 km north-northeast of the crater rim show gradual establishment of anoxic sea floor conditions through the late Jurassic. These poorly ventilated water conditions were overturned due to the Mjølnir impact event. Waves and currents transported impact glass (which is now partly weathered to smectite) into the depositional area where the drillhole is located. The succeeding crater collapse transported impact material (e.g., shocked quartz and Ir) from the crater rim and deeper levels to the core site. Normal marine depositional conditions were established a short time after the crater collapsed.     

Red Wing Creek structure,North Dakota: Petrographical and geochemical studies,and confirmation of impact origin

Abstract The 9 km diameter Red Wing Creek structure, North Dakota, is located within the oil-rich Williston Basin at 47°36′N and 103°33′W. Earlier geophysical studies indicated that this subsurface structure has a central uplift, surrounded by an annular crater moat, and a raised rim. Breccias were encountered during drilling between ～2000 and 2800 m depth in the central uplift area, and the presence of shatter cone fragments in drill core samples was suggested to indicate an impact origin of the Red Wing Creek structure. We studied the petrographic and geochemical characteristics of samples of well cuttings from two boreholes at the center of the structure: the True Oil 22–27 Burlington Northern and True Oil 11–27 Burlington Northern wells. We found planar deformation features (PDFs) in quartz with up to three sets of different crystallographic orientations in sandstone- and siltstone-dominated samples from the True Oil 11–27 borehole. U-stage measurements of the crystallographic orientations of the PDFs showed the occurrence of the shock-characteristic (0001), and orientations, with a dominance of (0001) and orientations. The relative frequencies of the orientations indicate a shock pressure of at least 12–20 GPa. These results provide unambiguous evidence for shock metamorphism at Red Wing Creek and confirm that the structure was formed by impact.     

Planar deformation features in quartz from impact‐produced polymict breccia of the Xiuyan crater,China

Abstract– The 1.8 km‐diameter Xiuyan crater is an impact structure in northeastern China, exposed in a Proterozoic metamorphic rock complex. The major rocks of the crater are composed of granulite, hornblendite, gneiss, tremolite marble, and marble. The bottom at the center of the crater covers about 100 m thick lacustrine sediments underlain by 188 m thick crater‐fill breccia. A layer of polymict breccia composed of clasts of granulite, gneiss, hornblendite, and fragments of glass as well as clastic matrix, occurs near the base, in the depth interval from 260 to 295 m. An investigation in quartz from the polymict breccia in the crater‐fill units reveals abundant planar deformation features (PDFs). Quartz with multiple sets of PDFs is found in clasts of granulite that consist of mainly quartz and feldspar, and in fine‐grained matrix of the impact‐produced polymict breccia. A universal stage was used to measure the orientation of PDFs in 70 grains of quartz from five thin sections made from the clasts of granulite of polymict breccia recovered at the depth of 290 m. Forty‐four percent of the quartz grains contain three sets of PDFs, and another 40% contain two sets of PDFs. The most abundant PDFs are rhombohedron forms of , , and with frequency of 33.5, 22.3, and 9.6%, respectively. A predominant PDF form of in quartz suggests a shock pressure >20 GPa. The occurrence of PDFs in quartz from the polymict breccia provides crucial evidence for shock metamorphism of target rocks and confirms the impact origin of this crater, which thus appears to be the first confirmed impact crater in China.     

Experimental study and TEM characterization of dusty olivines in chondrites: Evidence for formation by in situ reduction

Abstract— An analytical transmission electron microscopy (ATEM) study was undertaken in order to better understand the formation conditions of dusty olivines (i.e., olivines containing abundant tiny inclusions of Fe‐Ni metal) in primitive meteorites. Dusty olivines from type I chondrules in the Bishunpur chondrite (LL3.1) and from synthetic samples obtained by reduction of San Carlos olivines were examined. In both natural and experimental samples, micron size metal blebs observed in the dusty region often show preferential alignments along crystallographic directions of the olivine grains, have low Ni contents (typically <2 wt%), and are frequently surrounded by a silica‐rich glass layer. These features suggest that dusty olivines are formed by a sub‐solidus reduction of initially fayalitic olivines according to the following reaction: Some volatilization of SiO_gas may account for the apparent excess of metal relative to silica‐rich glass observed in both experimental and natural samples. Comparison with experimentally produced dusty olivines suggests that time scales of the order of minutes usually inferred for chondrule formation are also adequate for the formation of dusty olivines. These observations are in agreement with the hypothesis that at least part of the metal phase in chondrites originated from reduction during chondrule formation.     

Saqqar: A 34 km diameter impact structure in Saudi Arabia

Here we present the first proof of an impact origin for the Saqqar circular structure in northwestern Saudi Arabia (Neville et al. 2014 ), with an apparent diameter of 34 km, centered at 29°35′N, 38°42′E. The structure is formed in Cambrian–Devonian siliciclastics and is unconformably overlain by undeformed Cretaceous and Paleogene sediments. The age of impact is not well constrained and lies somewhere between 410 and 70 Ma. The subsurface structure is constrained by 2‐D reflection seismic profiles and six drilled wells. First‐order structural features are a central uplift that rises approximately 2 km above regional datums, surrounded by a ring syncline. The crater rim is defined by circumferential normal faults. The central uplift and ring syncline correspond to a Bouguer gravity high and an annular ring‐like low, respectively. The wells were drilled within the central uplift, the deepest among them exceed 2 km depth. Sandstone core samples from these wells show abundant indicators of a shock metamorphic overprint. Planar deformation features (PDFs) were measured with orientations along (0001), {103}, and less frequently along {101} and {104}. Planar fractures (PFs) predominantly occur along (0001) and {101}, and are locally associated with feather features (FFs). In addition, some shocked feldspar grains and strongly deformed mica flakes were found. The recorded shock pressure ranges between 5 and 15 GPa. The preserved level of shock and the absence of an allochthonous crater fill suggest that Saqqar was eroded by 1–2 km between the Devonian and Maastrichtian. The documentation of unequivocal shock features proves the formation of the Saqqar structure by a hypervelocity impact event.     

Investigation of the Rhabdite/Kamacite Law of Intergrowth in iron meteorites with the aid of the Kossel technique

Abstract— X-ray microdiffraction measurements based on the Kossel effect have been used for orientation determinations of rhabdite (i.e., small prismatic schreibersite crystals) with respect to the kamacite matrix. For that purpose, polished specimens of the Toluca meteorite have been analyzed after surface etching. Kossel patterns of kamacite and rhabdite have been recorded and simulated. As the law of intergrowth for idiomorphic rhabdite crystals, we confirmed the relations: In comparison with typical line widths, the Kossel lines of kamacite are distinctly broadened. This is found for the meteorite Toluca and a for a second sample, the meteorite Morasko. This behaviour is probably connected with a high dislocation density, as shown by transmission electron microscope investigations.     

Tsunami generation and propagation from the Mjølnir asteroid impact

Abstract— In the late Jurassic period, about 142 million years ago, an asteroid hit the shallow paleo‐Barents Sea, north of present‐day Norway. The geological structure resulting from the impact is today known as the Mjølnir crater. The present work attempts to model the generation and the propagation of the tsunami from the Mjølnir impact. A multi‐material hydrocode SOVA is used to model the impact and the early stages of tsunami generation, while models based on shallow‐water theories are used to study the subsequent wave propagation in the paleo‐Barents Sea. We apply several wave models of varying computational complexity. This includes both three‐dimensional and radially symmetric weakly dispersive and nonlinear Boussinesq equations, as well as equations based on nonlinear ray theory. These tsunami models require a reconstruction of the bathymetry of the paleo‐Barents Sea. The Mjølnir tsunami is characteristic of large bolides impacting in shallow sea; in this case the asteroid was about 1.6 km in diameter and the water depth was around 400 m. Contrary to earthquake‐ and slide‐generated tsunamis, this tsunami featured crucial dispersive and nonlinear effects: a few minutes after the impact, the ocean surface was formed into an undular bore, which developed further into a train of solitary waves. Our simulations indicate wave amplitudes above 200 m, and during shoaling the waves break far from the coastlines in rather deep water. The tsunami induced strong bottom currents, in the range of 30–90 km/h, which presumably caused a strong reworking of bottom sediments with dramatic consequences for the marine environment.     

Shocked quartz in polymict impact breccia from the Upper Cretaceous Yallalie impact structure in Western Australia

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia.     

The Keurusselkä impact structure,Finland—Impact origin confirmed by characterization of planar deformation features in quartz grains

Abstract– Although the meteorite impact origin of the Keurusselkä impact structure (central Finland) has been established on the basis of the occurrence of shatter cones, no detailed microscopic examination of the impactites from this structure has so far been made. Previous microscope investigations of in situ rocks did not yield any firm evidence of shock features (Raiskila et al. 2008; Kinnunen and Hietala 2009). We have carried out microscopic observations on petrographic thin sections from seven in situ shatter cone samples and report here the discovery of planar fractures (PFs) and planar deformation features (PDFs) in quartz and feldspar grains. The detection and characterization of microscopic shock metamorphic features in the investigated samples substantiates a meteorite impact origin for the Keurusselkä structure. The crystallographic orientations of 372 PDF sets in 276 quartz grains were measured, using a universal stage (U‐stage) microscope, for five of the seven distinct shatter cone samples. Based on our U‐stage results, we estimate that investigated shatter cone samples from the Keurusselkä structure have experienced peak shock pressures from approximately 2 GPa to slightly less than 20 GPa for the more heavily shocked samples. The decoration of most of the PDFs with fluid inclusions also indicates that these originally amorphous shock features were altered by postimpact processes. Finally, our field observations indicate that the exposed surface corresponds to the crater floor; it is, however, difficult to estimate the exact diameter of the structure and the precise amount of material that has been eroded since its formation.     

The clay mineralogy of sediments related to the marine Mjølnir impact crater

Abstract— The 40 km diameter Mjølnir Crater is located on the central Barents Sea shelf, north of Norway. It was formed about 142 ± 2.6 Myr ago by the impact of a 1–2 km asteroid into the shallow shelf clays of the Hekkingen Formation and the underlying Triassic to Jurassic sedimentary strata. A core recovered from the central high within the crater contains slump and avalanche deposits from the collapse of the transient crater and central high. These beds are overlain by gravity flow conglomerates, with laminated shales and marls on top. Here, impact and post‐impact deposits in this core are studied with focus on clay mineralogy obtained from XRD decomposition and simulation analysis methods. The clay‐sized fractions are dominated by kaolinite, illite, mixed‐layered clay minerals and quartz. Detailed analyses showed rather similar composition throughout the core, but some noticeable differences were detected, including varying crystal size of kaolinite and different types of illites and illite/smectite. These minerals may have been formed by diagenetic changes in the more porous/fractured beds in the crater compared to time‐equivalent beds outside the crater rim. Long‐term post‐impact changes in clay mineralogy are assumed to have been minor, due to the shallow burial depth and minor thermal influence from impact‐heated target rocks. Instead, the clay mineral assemblages, especially the abundance of chlorite, reflect the impact and post‐impact reworking of older material. Previously, an ejecta layer (the Sindre Bed) was recognized in a nearby well outside the crater, represented by an increase in smectite‐rich clay minerals, genetically equivalent to the smectite occurring in proximal ejecta deposits of the Chicxulub crater. Such alteration products from impact glasses were not detected in this study, indicating that little, if any, impact glass was deposited within the upper part of the crater fill. Crater‐fill deposits inherited their mineral composition from Triassic and Jurassic sediments underlying the impact site.     

WIP: A Web‐based program for indexing planar features in quartz grains and its usage

Planar deformation features (PDFs) in quartz are the most important diagnostic features that allow the unambiguous identification of impact structures on Earth. In order to confirm that these features (that are characterized by planar character and form along specific crystallographic planes) are indeed PDFs, they need to be properly investigated and indexed. Following universal‐stage measurements, the process of indexing is usually performed manually, using a Wulff stereonet and following a strict procedure, which is time consuming and error prone. In this article, we present WIP, a new Web‐based program for indexing planar deformation features in quartz. The correctness of our program is shown by its application to measurements that had previously been indexed manually. The observed minor differences, especially in the absolute frequency percentage of PDFs, are negligible and not significant enough to influence the estimation of shock pressure that could be calculated from the indexed results. Usability of this program is shown using the spatial relationships between a statistically significant number of 278 quartz grains with 409 sets of PDFs analyzed within the area (~35 mm²) of a single thin section of a meta‐greywacke from the Bosumtwi impact structure. Our program is not only more accurate and faster than the manual (graphical) method but also removes the human error from the plotting process and allows control of several parameters, such as the value of estimated measurement error used in the indexing calculation or method of aggregated error handling. The program also provides information about the angles between the planes of the measured PDF sets present in a grain, which allows determination of the angles between (for example) indexed {} and {} sets.     

Experimental studies of magnetite formation in the solar nebula

Abstract— Oxidation of Fe metal and Gibeon meteorite metal to magnetite via the net reaction 3 Fe (metal) + 4 H₂O (gas) = Fe₃O₄ (magnetite) + 4 H₂ (gas) was experimentally studied at ambient atmospheric pressure at 91–442 °C in H₂ and H₂-He gas mixtures with H₂/H₂O molar ratios of ～4–41. The magnetite produced was identified by x-ray diffraction. Electron microprobe analyses showed 3.3 wt% NiO and 0.24 wt% CoO (presumably as NiFe₂O₄ and CoFe₂O₄) in magnetite formed from Gibeon metal. The NiO and CoO concentrations are higher than expected from equilibrium between metal and oxide under the experimental conditions. Elevated NiO contents in magnetite were also observed by metallurgists during initial stages of oxidation of Fe-Ni alloys. The rate constants for magnetite formation were calculated from the weight gain data using a constant surface area model and the Jander, Ginstling-Brounshtein, and Valensi-Carter models for powder reactions. Magnetite formation followed parabolic (i.e., diffusion-controlled) kinetics. The rate constants and apparent activation energies for Fe metal and Gibeon metal are: These rate constants are significantly smaller than the parabolic rate constants for FeS growth on Fe metal in H₂S-H₂ gas mixtures containing 1000 or 10 000 ppmv H₂S (Lauretta et al., 1996a). The experimental data for Fe and Gibeon metal are used to model the reaction time of Fe alloy grains in the solar nebula as a function of grain size and temperature. The reaction times for 0.1–1 μm radius metal grains are generally within estimated lifetimes of the solar nebula (0.1–10 Ma). However, the calculated reaction times are probably lower limits, and further study of magnetite formation at larger H₂/H₂O ratios, at lower temperatures and pressures, and as a function of metal alloy composition is needed for further modeling of nebular magnetite formation.     

Post‐impact structural crater modification due to sediment loading: An overlooked process

Abstract— Post‐impact crater morphology and structure modifications due to sediment loading are analyzed in detail and exemplified in five well‐preserved impact craters: Mjølnir, Chesapeake Bay, Chicxulub, Montagnais, and Bosumtwi. The analysis demonstrates that the geometry and the structural and stratigraphic relations of post‐impact strata provide information about the amplitude, the spatial distribution, and the mode of post‐impact deformation. Reconstruction of the original morphology and structure for the Mjølnir, Chicxulub, and Bosumtwi craters demonstrates the long‐term subsidence and differential compaction that takes place between the crater and the outside platform region, and laterally within the crater structure. At Mjølnir, the central high developed as a prominent feature during post‐impact burial, the height of the peak ring was enhanced, and the cumulative throw on the rim faults was increased. The original Chicxulub crater exhibited considerably less prominent peak‐ring and inner‐ring/crater‐rim features than the present crater. The original relief of the peak ring was on the order of 420–570 m (currently 535–575 m); the relief on the inner ring/crater rim was 300–450 m (currently ?700 m). The original Bosumtwi crater exhibited a central uplift/high whose structural relief increased during burial (current height 101–110 m, in contrast to the original height of 85–110 m), whereas the surrounding western part of the annular trough was subdued more that the eastern part, exhibiting original depths of 43–68 m (currently 46 m) and 49–55 m (currently 50 m), respectively. Furthermore, a quantitative model for the porosity change caused by the Chesapeake Bay impact was developed utilizing the modeled density distribution. The model shows that, compared with the surrounding platform, the porosity increased immediately after impact up to 8.5% in the collapsed and brecciated crater center (currently +6% due to post‐impact compaction). In contrast, porosity decreased by 2–3% (currently ?3 to ?4.5% due to post‐impact compaction) in the peak‐ring region. The lateral variations in porosity at Chesapeake Bay crater are compatible with similar porosity variations at Mjølnir crater, and are considered to be responsible for the moderate Chesapeake Bay gravity signature (annular low of ?8 mGal instead of ?15 mGal). The analysis shows that the reconstructions and the long‐term alterations due to post‐impact burial are closely related to the impact‐disturbed target‐rock volume and a brecciated region of laterally varying thickness and depth‐varying physical properties. The study further shows that several crater morphological and structural parameters are prone to post‐impact burial modification and are either exaggerated or subdued during post‐impact burial. Preliminary correction factors are established based on the integrated reconstruction and post‐impact deformation analysis. The crater morphological and structural parameters, corrected from post‐impact loading and modification effects, can be used to better constrain cratering scaling law estimates and impact‐related consequences.     

The Foelsche structure,Northern Territory,Australia: An impact crater of probable Neoproterozoic age

Abstract— The Foelsche structure is situated in the McArthur Basin of northern Australia (16°40′ S, 136°47′ E). It comprises a roughly circular outcrop of flat‐lying Neoproterozoic Bukalara Sandstone, overlying and partly rimmed by tangentially striking, discontinuous outcrops of dipping, fractured and brecciated Mesoproterozoic Limmen Sandstone. The outcrop expression coincides with a prominent circular aeromagnetic anomaly, which can be explained in terms of the local disruption and removal or displacement of a regional mafic igneous layer within a circular area at depth. Samples of red, lithic, pebbly sandstone from the stratigraphically lowest exposed levels of the Bukalara Sandstone within the Foelsche structure contain detrital quartz grains displaying mosaicism, planar fractures (PFs) and planar deformation features (PDFs). PFs and PDFs occur in multiple intersecting sets with orientations consistent with a shock metamorphic origin. The abundance and angular nature of the shocked grains indicates a nearby provenance. Surface expression and geophysical data are consistent with a partly buried complex impact crater of ?6 km in diameter with an obscured central uplift ?2 km in diameter. The deformed outcrops of Limmen Sandstone are interpreted as relics of the original crater rim, but the central region of the crater, from which the shocked grains were likely derived, remains buried. From the best available age constraints the Foelsche structure is most likely of Neoproterozoic age.     

Vapor‐condensed phase processes in the early solar system

Abstract– Equilibrium thermodynamic calculations of the sequence of condensation of phases from a cooling gas of solar composition at total pressures thought to have prevailed in the inner part of the solar nebula successfully predict the primary mineral assemblages of refractory inclusions in CM2 and CV3 chondrites. Many refractory inclusions in CM2 chondrites contain a relatively SiO₂‐poor assemblage (spinel, hibonite, grossite, perovskite, corundum) that represents a high‐temperature stage of condensation, and some may be pristine condensates that escaped later melting. Compact Type A and Type B refractory inclusions, consisting of spinel, melilite, perovskite, Ca‐rich clinopyroxene ± anorthite, in CV3 chondrites are more SiO₂‐rich and equilibrated with the solar nebular gas at a slightly lower temperature. Textures of many of these objects indicate that they underwent melting after condensation, crystallizing into the same phase assemblage as their precursors. The Ti³⁺/Ti⁴⁺ ratio of their pyroxene indicates that this process occurred in a gas whose oxygen fugacity () was approximately 8.5 log units below that of the iron‐wüstite buffer, making them the only objects in chondrites known to have formed in a system whose composition was close to that of the sun. Relative to CI chondrites, these inclusions are uniformly enriched in a group of elements (e.g., Ca, REE, Zr, Ta, Ir) that are chemically diverse except for their high condensation temperatures in a system of solar composition. The enrichment factor, 17.5, can be interpreted to mean that these objects represent either the first 5.7 wt% of the condensable matter to condense during nebular cooling or the residue after vaporization of 94.3% of a CI chondrite precursor. The Mg and Si isotopic compositions of Types A and B inclusions are mass‐fractionated by up to 10 and 4 ‰/amu, respectively. When interpreted in terms of Rayleigh fractionation during evaporation of Mg and Si from the inclusions while they were molten, the isotopic compositions imply that up to 60% of the Mg and up to 25% of the Si were evaporated, and that approximately 80% of the enrichment in refractory (CaO+Al₂O₃) relative to more volatile (MgO+SiO₂) in the average inclusion is due to initial condensation and approximately 20% due to subsequent evaporation. The mineralogical composition, including the Ti³⁺/Ti⁴⁺ ratio of the pyroxene, in Inti, a particle sampled from Comet Wild 2 by the Stardust spacecraft, is nearly identical to that of a Type B inclusion, indicating that comets contain not only the lowest‐temperature condensates in the form of ices but the highest‐temperature condensates as well. The FeO/(FeO+MgO) ratios of olivine and pyroxene in the matrix and chondrules of carbonaceous and ordinary chondrites are too high to be made in a system of solar composition, requiring s only 1 or 2 log units below iron‐wüstite, more than 10⁵ times higher than that of a solar gas. Various ways have been devised to generate cosmic gases sufficiently oxidizing to stabilize significant FeO in olivine at temperatures above those where Fe‐Mg interdiffusion in olivine ceases. One is by vertical settling of dust toward the nebular midplane, enriching a region in dust relative to gas. Because dust is enriched in oxygen compared to carbon and hydrogen relative to solar composition, a higher results from total vaporization of the region, but the factor by which theoretical models have so far enriched the dust is 10 times too low. Another is by transporting icy bodies from the outer part of the nebula into the hot, inner part where vaporization of water ice occurs. Not only does this method fail to make the needed by a factor of 30–1000 but it also ignores simultaneous evaporation of carbon‐bearing ices that would make the even lower.