Landslide susceptibility mapping in the Damrei Romel area, Cambodia using frequency ratio and logistic regression models

This study applied, tested and compared a probability model, a frequency ratio and statistical model, a logistic regression to Damre Romel area, Cambodia, using a geographic information system. For landslide susceptibility mapping, landslide locations were identified in the study area from interpretation of aerial photographs and field surveys, and a spatial database was constructed from topographic maps, geology and land cover. The factors that influence landslide occurrence, such as slope, aspect, curvature and distance from drainage were calculated from the topographic database. Lithology and distance from lineament were extracted and calculated from the geology database. Land cover was classified from Landsat TM satellite imagery. The relationship between the factors and the landslides was calculated using frequency ratio and logistic regression models. The relationships, frequency ratio and logistic regression coefficient were overlaid to make landslide susceptibility map. Then the landslide susceptibility map was compared with known landslide locations and tested. As the result, the frequency ratio model (86.97%) and the logistic regression (86.37%) had high and similar prediction accuracy. The landslide susceptibility map can be used to reduce hazards associated with landslides and to land cover planning.     

Predictive landslide susceptibility mapping using spatial information in the Pechabun area of Thailand

For predictive landslide susceptibility mapping, this study applied and verified probability model, the frequency ratio and statistical model, logistic regression at Pechabun, Thailand, using a geographic information system (GIS) and remote sensing. Landslide locations were identified in the study area from interpretation of aerial photographs and field surveys, and maps of the topography, geology and land cover were constructed to spatial database. The factors that influence landslide occurrence, such as slope gradient, slope aspect and curvature of topography and distance from drainage were calculated from the topographic database. Lithology and distance from fault were extracted and calculated from the geology database. Land cover was classified from Landsat TM satellite image. The frequency ratio and logistic regression coefficient were overlaid for landslide susceptibility mapping as each factor’s ratings. Then the landslide susceptibility map was verified and compared using the existing landslide location. As the verification results, the frequency ratio model showed 76.39% and logistic regression model showed 70.42% in prediction accuracy. The method can be used to reduce hazards associated with landslides and to plan land cover.     

Landslide susceptibility zonation mapping and its validation in part of Garhwal Lesser Himalaya, India, using binary logistic regression analysis and receiver operating characteristic curve method

A landslide susceptibility zonation (LSZ) map helps to understand the spatial distribution of slope failure probability in an area and hence it is useful for effective landslide hazard mitigation measures. Such maps can be generated using qualitative or quantitative approaches. The present study is an attempt to utilise a multivariate statistical method called binary logistic regression (BLR) analysis for LSZ mapping in part of the Garhwal Lesser Himalaya, India, lying close to the Main Boundary Thrust (MBT). This method gives the freedom to use categorical and continuous predictor variables together in a regression analysis. Geographic Information System has been used for preparing the database on causal factors of slope instability and landslide locations as well as for carrying out the spatial modelling of landslide susceptibility. A forward stepwise logistic regression analysis using maximum likelihood estimation method has been used in the regression. The constant and the coefficients of the predictor variables retained by the regression model have been used to calculate the probability of slope failure for the entire study area. The predictive logistic regression model has been validated by receiver operating characteristic curve analysis, which has given 91.7% accuracy for the developed BLR model.     

Landslides in Sado Island of Japan: Part II. GIS-based susceptibility mapping with comparisons of results from two methods and verifications

Slope instability research and susceptibility mapping is a fundamental component of hazard management and an important basis for provision of measures aimed at decreasing the risk of living with landslides. On this basis, this paper presents the result of a comprehensive study on slope stability analyses and landslide susceptibility mapping carried out in part of Sado Island of Japan. Various types of landslides occurred in the island throughout history. Little is known about the triggering factors and severity of old landslides, but for many of the recent slope failures, the slope characteristics and stratigraphy are such that ground surfaces retain water perennially and landslides occur when additional moisture is induced during rainfall and snowmelt. A range of methods are available in literature for preparation of landslide susceptibility maps. In this study we used two methods namely, the analytical hierarchy process (AHP) and logistic regression, to produce and later compare two susceptibility maps. AHP is a semi-qualitative method, which involves a matrix-based pair-wise comparison of the contribution of different factors for landsliding. Logistic regression on the other hand promotes a multivariate statistical analysis with an objective to find the best-fitting model that describes the relationship between the presence or absence of landslides (dependent variable) and a set of causal factors (independent parameters). Elevation, lithology and slope gradient were casual factors in this study. The determinations of factor weights by AHP and logistic regression were preceded by the calculation of class weights (landslide densities) based on bivariate statistical analyses (BSA). The differences between the AHP derived susceptibility map and the logistic regression counterpart are relatively minor when broad-based classifications are considered. However, with an increase in the number of susceptibility classes, the logistic regression map gave more details but the one derived by AHP failed to do so. The reason is that the majority of pixels in the AHP map have high values, and an increase in the number of classes gives little change in the spatial distribution of susceptibility zones in the middle. To verify the practicality of the two susceptibility maps, both of them were compared with a landslide activity map containing 18 active landslide zones. The outcome was that the active landslide zones do not completely fit into the very high susceptibility class of both maps for various reasons. But 70% of these landslide zones fall into the high and very high susceptibility zones of the AHP map while this is 63% in the case of logistic regression. This indicates that despite the skewed distribution of susceptibility indices, the AHP map was better to capture the reality on the ground than the logistic regression equivalent.     

Quantitative landslide susceptibility mapping at Pemalang area,Indonesia

For quantitative landslide susceptibility mapping, this study applied and verified a frequency ratio, logistic regression, and artificial neural network models to Pemalang area, Indonesia, using a Geographic Information System (GIS). Landslide locations were identified in the study area from interpretation of aerial photographs, satellite imagery, and field surveys; a spatial database was constructed from topographic and geological maps. The factors that influence landslide occurrence, such as slope gradient, slope aspect, curvature of topography, and distance from stream, were calculated from the topographic database. Lithology was extracted and calculated from geologic database. Using these factors, landslide susceptibility indexes were calculated by frequency ratio, logistic regression, and artificial neural network models. Then the landslide susceptibility maps were verified and compared with known landslide locations. The logistic regression model (accuracy 87.36%) had higher prediction accuracy than the frequency ratio (85.60%) and artificial neural network (81.70%) models. The models can be used to reduce hazards associated with landslides and to land-use planning.     

Landslide susceptibility assessment in the İzmir (West Anatolia,Turkey) city center and its near vicinity by the logistic regression method

A landslide susceptibility assessment for İzmir city (Western Turkey), which is the third biggest city of Turkey, was performed by a logistic regression method. A database of landslide characteristics was prepared using detailed field surveys. The major landslides in the study area are generally observed in the field, dominated by weathered volcanics, and 39.63% of the total landslide area is in this unit. The parameters of lithology, slope gradient, slope aspect, distance to drainage, distance to roads and distance to fault lines were used as variables in the logistic regression analysis. The effect of each parameter on landslide occurrence was assessed from the corresponding coefficients that appear in the logistic regression function. On the basis of the obtained coefficients, lithology plays the most important role in determining landslide occurrence and distribution. Slope gradient has a more significant effect than the other geomorphological parameters, such as slope aspect and distance to drainage. Using a predicted map of probability, the study area was classified into five categories of landslide susceptibility: very low, low, moderate, high and very high. Whereas 49.65% of the total study area has very low susceptibility, very high susceptibility zones make up 11.69% of the area.     

Application of logistic regression model for slope instability prediction in Cuyahoga River Watershed,Ohio, USA

High incidences of slope movement are observed throughout Cuyahoga River watershed in northeast Ohio, USA. The major type of slope failure involves rotational movement in steep stream walls where erosion of the banks creates over-steepened slopes. The occurrence of landslides in the area depends on a complex interaction of natural as well as human induced factors, including: rock and soil strength, slope geometry, permeability, precipitation, presence of old landslides, proximity to streams and flood-prone areas, land use patterns, excavation of lower slopes and/or increasing the load on upper slopes, alteration of surface and subsurface drainage. These factors were used to evaluate the landslide-induced hazard in Cuyahoga River watershed using logistic regression analysis, and a landslide susceptibility map was produced in ArcGIS. The map classified land into four categories of landslide susceptibility: low, moderate, high, and very high. The susceptibility map was validated using known landslide locations within the watershed area. The landslide susceptibility map produced by the logistic regression model can be efficiently used to monitor potential landslide-related problems, and, in turn, can help to reduce hazards associated with landslides.     

Estimating potential landslide sites of an upland sub-watershed in Western Ghat’s of Kerala (India) through frequency ratio and GIS

The purpose of this study is to assess the susceptibility of landslides in parts of Western Ghats, Kerala, India, using a geographical information system (GIS). Landslide inventory of the area was made by detailed field surveys and the analysis of the topographical maps. The landslide triggering factors are considered to be slope angle, slope aspect, slope curvature, slope length, distance from drainage, distance from lineaments, lithology, land use and geomorphology. ArcGIS version 8.3 was used to manipulate and analyse all the collected data. Probabilistic-likelihood ratio was used to create a landslide susceptibility map for the study area. The result was validated using the Area under Curve (AUC) method and temporal data of landslide occurrences. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide locations. As the result, the success rate of the model was (84.46%) and the prediction rate of the model was (82.38%) shows high prediction accuracy. In the reclassified final landslide susceptibility zone map, 5.68% of the total area is classified as critical in nature. The landslide susceptibility map thus produced can be used to reduce hazards associated with landslides and to land cover planning.     

GIS-based landslide susceptibility for Arsin-Yomra (Trabzon,North Turkey) region

The purpose of this study is to assess the susceptibility of landslides around Yomra and Arsin towns near Trabzon, in northeast of Turkey, using a geographical information system (GIS). Landslide inventory of the area was made by detailed field surveys and the analyses of the topographical map. The landslide triggering factors are considered to be slope angle, slope aspect, distance from drainage, distance from roads and the weathered lithological units, which were called as “geotechnical units” in the study. Idrisi and ArcGIS packages manipulated all the collected data. Logistic regression (LR) and weighted linear combination (WLC) statistical methods were used to create a landslide susceptibility map for the study area. The results were assessed within the scope of two different points: (a) effectiveness of the methods used and (b) effectiveness of the environmental casual parameters influencing the landslides. The results showed that the WLC model is more suitable than the LR model. Regarding the casual parameters, geotechnical units and slopes were found to be the most important variables for estimating the landslide susceptibility in the study area.     

Landslide susceptibility zonation mapping using logistic regression and its validation in Hashtchin Region,northwest of Iran

Landslide susceptibility zonation mapping assists researchers greatly to understand the spatial distribution of slope failure probability in a region. Being extremely useful in reducing landslide hazards, such maps could simply be produced using both qualitative and quantitative methods. In the present study, a multivariate statistical method called ‘logistic regression’ was used to assess landslide susceptibility in Hashtchin region, situated in west of Alborz Mountainsnorthwest of Iran. In this study, two independent variables, categorical (predictor) and continuous, were drawn on together in the model. To identify the region’s landslides use was made of aerial photographs, field studies and topographic maps. To prepare the database of factors affecting the region’s landslides and to determine landslide zones, geographic information system (GIS) was used. Using such information, landslide susceptibility modeling was accomplished. The data related to factors causing landslides were extracted as independent variables in each cell (in 50 m×50 m cells). Then, the whole data were input into the SPSS, Version 18. The prepared database was later analyzed using logistic regression, the forward stepwise method and based on maximum likelihood estimation. Regression equation was determined using obtained constants and coefficients and the landslide susceptibility of the area in grid-cells (pixels) was computed between 0 and 0.9954. The Receiver Operating Characteristic (ROC) curve was used to assess the accuracy of the logistic regression model. The predicting ability of the model was 84.1% given the area under ROC curve. Finally, the degree of success of landslide susceptibility zonation mapping was estimated to be 79%.     

A comparative study on the landslide susceptibility mapping using logistic regression and statistical index models

The logistic regression and statistical index models are applied and verified for landslide susceptibility mapping in Daguan County, Yunnan Province, China, by means of the geographic information system (GIS). A detailed landslide inventory map was prepared by literatures, aerial photographs, and supported by field works. Fifteen landslide-conditioning factors were considered: slope angle, slope aspect, curvature, plan curvature, profile curvature, altitude, STI, SPI, and TWI were derived from digital elevation model; NDVI was extracted from Landsat ETM7; rainfall was obtained from local rainfall data; distance to faults, distance to roads, and distance to rivers were created from a 1:25,000 scale topographic map; the lithology was extracted from geological map. Using these factors, the landslide susceptibility maps were prepared by LR and SI models. The accuracy of the results was verified by using existing landslide locations. The statistical index model had a predictive rate of 81.02%, which is more accurate prediction in comparison with logistic regression model (80.29%). The models can be used to land-use planning in the study area.     

Evaluation of deep learning algorithms for national scale landslide susceptibility mapping of Iran

The identification of landslide-prone areas is an essential step in landslide hazard assessment and mitigation of landslide-related losses.In this study,we applied two novel deep learning algorithms,the recurrent neural network(RNN)and convolutional neural network(CNN),for national-scale landslide susceptibility mapping of Iran.We prepared a dataset comprising 4069 historical landslide locations and 11 conditioning factors(altitude,slope degree,profile curvature,distance to river,aspect,plan curvature,distance to road,distance to fault,rainfall,geology and land-sue)to construct a geospatial database and divided the data into the training and the testing dataset.We then developed RNN and CNN algorithms to generate landslide susceptibility maps of Iran using the training dataset.We calculated the receiver operating characteristic(ROC)curve and used the area under the curve(AUC)for the quantitative evaluation of the landslide susceptibility maps using the testing dataset.Better performance in both the training and testing phases was provided by the RNN algorithm(AUC=0.88)than by the CNN algorithm(AUC=0.85).Finally,we calculated areas of susceptibility for each province and found that 6%and 14%of the land area of Iran is very highly and highly susceptible to future landslide events,respectively,with the highest susceptibility in Chaharmahal and Bakhtiari Province(33.8%).About 31%of cities of Iran are located in areas with high and very high landslide susceptibility.The results of the present study will be useful for the development of landslide hazard mitigation strategies.     

逻辑回归模型在玉树地震滑坡危险性评价中的应用与检验

2010年4月14日07时49分(北京时间),青海省玉树县发生了Ms7.1级大地震。作者基于高分辨率遥感影像解译与现场调查验证的方法,圈定了2036处本次地震诱发滑坡。这些滑坡受地震地表破裂控制强烈,规模相对较小,常常密集成片分布。滑坡类型多样,以崩塌型滑坡为主,还包括滑动型、流滑型、碎屑流型、复合型等类型的滑坡。本文基于地理信息系统(GIS)与遥感(RS)技术,应用逻辑回归模型开展玉树地震滑坡危险性评价,并对结果合理性进行检验。应用GIS技术建立玉树地震滑坡灾害及相关滑坡影响因子空间数据库,选择高程、斜坡坡度、斜坡坡向、斜坡曲率、与水系距离、坡位、断裂、地层岩性、归一化植被指数(NDVI)、公路、同震地表破裂、地震动峰值加速度(PGA)共12个因子作为玉树地震滑坡影响因子,在GIS平台下将这些因子专题图层栅格化。应用逻辑回归模型得到每个因子分级的回归系数,然后建立滑坡危险性指数分布图。利用玉树地震滑坡空间分布图对滑坡危险性指数图进行检验,正确率达到83.21%。滑坡危险性分级结果表明,在占研究区总面积4.97%的"很高危险度"的较小范围内,实际发育滑坡数量为766个,占总滑坡面积的比例高达37.62%,表明地震滑坡危险性评价结果良好。不同危险性级别的滑坡点密度统计结果表明,滑坡点密度随着危险性级别的升高而非常迅速的升高。     

A comparative study on the landslide susceptibility mapping using evidential belief function and weights of evidence models

The purpose of this study is to produce landslide susceptibility map of a landslide-prone area (Daguan County, China) by evidential belief function (EBF) model and weights of evidence (WoE) model to compare the results obtained. For this purpose, a landslide inventory map was constructed mainly based on earlier reports and aerial photographs, as well as, by carrying out field surveys. A total of 194 landslides were mapped. Then, the landslide inventory was randomly split into a training dataset; 70% (136 landslides) for training the models and the remaining 30% (58 landslides) was used for validation purpose. Then, a total number of 14 conditioning factors, such as slope angle, slope aspect, general curvature, plan curvature, profile curvature, altitude, distance from rivers, distance from roads, distance from faults, lithology, normalized difference vegetation index (NDVI), sediment transport index (STI), stream power index (SPI), and topographic wetness index (TWI) were used in the analysis. Subsequently, landslide susceptibility maps were produced using the EBF and WoE models. Finally, the validation of landslide susceptibility map was accomplished with the area under the curve (AUC) method. The success rate curve showed that the area under the curve for EBF and WoE models were of 80.19% and 80.75% accuracy, respectively. Similarly, the validation result showed that the susceptibility map using EBF model has the prediction accuracy of 80.09%, while for WoE model, it was 79.79%. The results of this study showed that both landslide susceptibility maps obtained were successful and would be useful for regional spatial planning as well as for land cover planning.     

Landslide hazard mapping using logistic regression model in Mackenzie Valley,Canada

A logistic regression model is developed within the framework of a Geographic Information System (GIS) to map landslide hazards in a mountainous environment. A case study is conducted in the mountainous southern Mackenzie Valley, Northwest Territories, Canada. To determine the factors influencing landslides, data layers of geology, surface materials, land cover, and topography were analyzed by logistic regression analysis, and the results are used for landslide hazard mapping. In this study, bedrock, surface materials, slope, and difference between surface aspect and dip direction of the sedimentary rock were found to be the most important factors affecting landslide occurrence. The influence on landslides by interactions among geologic and geomorphic conditions is also analyzed, and used to develop a logistic regression model for landslide hazard mapping. The comparison of the results from the model including the interaction terms and the model not including the interaction terms indicate that interactions among the variables were found to be significant for predicting future landslide probability and locating high hazard areas. The results from this study demonstrate that the use of a logistic regression model within a GIS framework is useful and suitable for landslide hazard mapping in large mountainous geographic areas such as the southern Mackenzie Valley.     

Landslide susceptibility mapping of the Sera River Basin using logistic regression model

Of the natural hazards in Turkey, landslides are the second most devastating in terms of socio-economic losses, with the majority of landslides occurring in the Eastern Black Sea Region. The aim of this study is to use a statistical approach to carry out a landslide susceptibility assessment in one area at great risk from landslides: the Sera River Basin located in the Eastern Black Sea Region. This paper applies a multivariate statistical approach in the form of a logistics regression model to explore the probability distribution of future landslides in the region. The model attempts to find the best fitting function to describe the relationship between the dependent variable, here the presence or absence of landslides in a region and a set of independent parameters contributing to the occurrence of landslides. The dependent variable (0 for the absence of landslides and 1 for the presence of landslides) was generated using landslide data retrieved from an existing database and expert opinion. The database has information on a few landslides in the region, but is not extensive or complete, and thus unlike those normally used for research. Slope, angle, relief, the natural drainage network (including distance to rivers and the watershed index) and lithology were used as independent parameters in this study. The effect of each parameter was assessed using the corresponding coefficient in the logistic regression function. The results showed that the natural drainage network plays a significant role in determining landslide occurrence and distribution. Landslide susceptibility was evaluated using a predicted map of probability. Zones with high and medium susceptibility to landslides make up 38.8 % of the study area and are located mostly south of the Sera River Basin and along streams.     

Landslide susceptibility mapping using GIS-based weighted linear combination,the case in Tsugawa area of Agano River,Niigata Prefecture,Japan

A spatial database of 791 landslides is analyzed using GIS to map landslide susceptibility in Tsugawa area of Agano River. Data from six landslide-controlling parameters namely lithology, slope gradient, aspect, elevation, and plan and profile curvatures are coded and inserted into the GIS. Later, an index-based approach is adopted both to put the various classes of the six parameters in order of their significance to the process of landsliding and weigh the impact of one parameter against another. Applying primary and secondary-level weights, a continuous scale of numerical indices is obtained with which the study area is divided into five classes of landslide susceptibility. Slope gradient and elevation are found to be important to delineate flatlands that will in no way be subjected to slope failure. The area which is at high scale of susceptibility lies on mid-slope mountains where relatively weak rocks such as sandstone, mudstone and tuff are outcropping as one unit.     

A comparison of landslide susceptibility maps produced by logistic regression, multi-criteria decision, and likelihood ratio methods: a case study at ?zmir, Turkey

The main purpose of this study is to compare the use of logistic regression, multi-criteria decision analysis, and a likelihood ratio model to map landslide susceptibility in and around the city of İzmir in western Turkey. Parameters, such as lithology, slope gradient, slope aspect, faults, drainage lines, and roads, were considered. Landslide susceptibility maps were produced using each of the three methods and then compared and validated. Before the modeling and validation, the observed landslides were separated into two groups. The first group was for training, and the other group was for validation steps. The accuracy of models was measured by fitting them to a validation set of observed landslides. For validation process, the area under curvature (AUC) approach was applied. According to the AUC values of 0.810, 0.764, and 0.710 for logistic regression, likelihood ratio, and multi-criteria decision analysis, respectively, logistic regression was determined to be the most accurate method among the other used landslide susceptibility mapping methods. Based on these results, logistic regression and likelihood ratio models can be used to mitigate hazards related to landslides and to aid in land-use planning.     

Statistical analysis of landslide susceptibility at Yongin, Korea

The aim of this study is to evaluate the susceptibility of landslides at Yongin, Korea, using a geographic information system (GIS). Landslide locations were identified in the Yongin area from interpretation of aerial photographs, field surveys, and maps of the topography, soil type, timber cover, and geology. These data were collected and constructed into a spatial database using GIS. The factors that influence landslide occurrence, such as slope, aspect, and curvature of topography, were calculated from the topographic database. Texture, material, drainage, and effective soil thickness were extracted from the soil database, and type, age, diameter, and density of timber were extracted from the forest database. Lithology was extracted from the geological database, and land use was classified from the Landsat TM satellite image. Landslide susceptibility was analyzed using the landslide occurrence factors by probability and logistic regression methods. The results of the analysis were verified using the landslide location data. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide location. The GIS was used to analyze the vast amount of data efficiently, and statistical programs were used to maintain specificity and accuracy. The results can be used to reduce associated hazards, and to plan land use and construction.