The effect of asymmetric dune roughness on tidal asymmetry in the Weser estuary

The bed of estuaries is often characterized by ripples and dunes of varying size. Whereas smaller bedforms adapt their morphological shape to the oscillating tidal currents, large compound dunes (here: asymmetric tidal dunes) remain stable for periods longer than a tidal cycle. Bedforms constitute a form roughness, that is, hydraulic flow resistance, which has a large-scale effect on tidal asymmetry and, hence, on hydrodynamics, sediment transport, and morphodynamics of estuaries and coastal seas. Flow separation behind the dune crest and recirculation on the steep downstream side result in turbulence and energy loss. Since the energy dissipation can be related to the dune lee slope angle, asymmetric dune shapes induce variable flow resistance during ebb and flood phases. Here, a noncalibrated numerical model has been applied to analyze the large-scale effect of symmetric and asymmetric dune shapes on estuarine tidal asymmetry evaluated by residual bed load sediment transport at the Weser estuary, Germany. Scenario simulations were performed with parameterized bed roughness of symmetric and asymmetric dune shapes and without dune roughness. The spatiotemporal interaction of distinct dune shapes with the main drivers of estuarine sediment and morphodynamics, that is, river discharge and tidal energy, is shown to be complex but substantial. The contrasting effects of flood- and ebb-oriented asymmetric dunes on residual bed load transport rates and directions are estimated to be of a similar importance as the controls of seasonal changes of discharge on these net sediment fluxes at the Lower Weser estuary. This corroborates the need to consider dune-induced directional bed roughness in numerical models of estuarine and tidal environments.     

Modeling river dune development and dune transition to upper stage plane bed

Large asymmetric bedforms known as dunes commonly dominate the bed of sand rivers. Due to the turbulence generation over their stoss and lee sides, dunes are of central importance in predicting hydraulic roughness and water levels. During floods in steep alluvial rivers, dunes are observed to grow rapidly as flow strength increases, undergoing an unstable transition regime, after which they are washed out in what is called upper stage plane bed. This transition of dunes to upper stage plane bed is associated with high transport of bed sediment in suspension and large decrease in bedform roughness. In the present study, we aim to improve the prediction of dune development and dune transition to upper stage plane bed by introducing the transport of suspended sediment in an existing dune evolution model. In addition, flume experiments are carried out to investigate dune development under bed load and suspended load dominated transport regimes, and to get insight in the time scales related to the transition of dunes to upper stage plane bed. Simulations with the extended model including the transport of suspended sediment show significant improvement in the prediction of equilibrium dune parameters (e.g. dune height, dune length, dune steepness, dune migration rate, dune lee side slope) both under bed load dominant and suspended load dominant transport regimes. The chosen modeling approach also allows us to model the transition of dunes to upper stage plane bed which was not possible with the original dune evolution model. The extended model predicts change in the dune shapes as was observed in the flume experiments with decreasing dune heights and dune lee slopes. Furthermore, the time scale of dune transition to upper stage plane bed was quite well predicted by the extended model. Copyright © 2015 John Wiley & Sons, Ltd.     

Embryo dune development on a large,actively accreting macrotidal beach: Calais,North Sea coast of France

Sediment budget data from an 18‐month topographic survey were analysed with data from brief experiments on wind parameters, beach moisture contents, bedforms and sand mobilization in order to monitor conditions and patterns of embryo dune development over a flat 150–1000 m wide accreting upper beach. The surface conditions over the upper beach locally affect aeolian transport, but net dune development over time depends on sustained strong winds and their orientation. Incoming marine sand supplied by storms and onshore winds is reorganized by the dominant offshore to longshore winds into elongated embryo dunes over this upper beach, imprinting a regional morphology of long‐term longshore dune ridge development. Copyright © 2006 John Wiley & Sons, Ltd.     

Observation and numerical modeling of tidal dune dynamics

Tidal sand dune dynamics is observed for two tidal cycles in the Arcachon tidal inlet, southwest France. An array of instruments is deployed to measure bathymetric and current variations along dune profiles. Based on the measurements, dune crest horizontal and vertical displacements are quantified and show important dynamics in phase with tidal currents. We observed superimposed ripples on the dune stoss side and front, migrating and changing polarity as tidal currents reverse. A 2D RANS numerical model is used to simulate the morphodynamic evolution of a flat non-cohesive sand bed submitted to a tidal current. The model reproduces the bed evolution until a field of sand bedforms is obtained that are comparable with observed superimposed ripples in terms of geometrical dimensions and dynamics. The model is then applied to simulate the dynamics of a field of large sand dunes of similar size as the dunes observed in situ. In both cases, simulation results compare well with measurements qualitatively and quantitatively. This research allows for a better understanding of tidal sand dune and superimposed ripple morphodynamics and opens new perspectives for the use of numerical models to predict their evolution.     

Migration and internal architecture of marine dunes in the eastern English Channel over 14 and 56 year intervals: the influence of tides and decennial storms

Submarine dune dynamics are controlled by tidal currents and wind forces. According to the relative influence of these forces and the nature of dune sediment, different bedform behaviors can be observed. The footprint of the different hydrodynamic agents is recorded into the internal architecture of dunes. This paper is concerned with bedforms that compose the thick sediment wedge located in the eastern English Channel, off the Bay of Somme. This sedimentary archive constitutes an interesting feature to achieve a better understanding of seabed sediment dynamics and its timeline building stages. The dynamics of large submarine dunes, which are organized in fields, are studied thanks to bathymetric and seismic data over the periods 1937–1993 and 1993–2007. Dune morphology presents low lee and stoss side slopes (on average 8° and 3°, respectively) and dune migration rate is not very high. Dune movements are in the direction of residual tidal currents, i.e. toward the east, with mean migration rates around 0·8 to 5 ± 0·25 m yr^?1 and up to 6·6 ± 0·7 m yr^?1, respectively, at multi‐decennial and decennial time scales. The dune internal architecture is complex with superimposed eastward prograding units, displaying locally opposite progradation. Second‐order discontinuities (dip of 0·5°–4° perpendicular to dune crests) constitute dune master bedding. By counting the number of second‐order reflectors between 1937–1993 and 1993–2007, the formation periodicity of these bounding surfaces is estimated to range from 4 to 18 years. These time intervals coincide with the long‐term tidal cyclicities and also with the inter‐annual to decennial variability of storm activity in northern Europe. Two theories were made to interpret the dune internal structures: the second‐order surfaces are interpreted either as the depositional surfaces corresponding to the marks of weak energy periods (weak tidal and storm action), or as erosive surfaces due to an opposite direction of dune migration provoked temporarily by exceptional storms from the northeast. Copyright © 2010 John Wiley & Sons, Ltd.     

Large‐scale sediment bodies and superimposed bedforms on the continental shelf close to the Strait of Gibraltar: interplay of complex oceanographic conditions and physiographic constraints

A previously unknown field of large‐scale sedimentary bodies has been mapped and studied on the continental shelf off the Cape Trafalgar near the Strait of Gibraltar with particular emphasis on the relationship between large‐scale sediment bodies and the superimposed bedforms. This study is based on a grid of 975 km of high‐resolution seismic profiles collected at water depths ranging between 15 and 60 m. High variability of large‐scale sedimentary bodies is attributed to the complex interaction of hydrodynamic agents. The most prominent sedimentary features are sand banks and ridges that indicate long‐term southwest and southward‐directed sediment transport patterns, possibly due to the interplay of two dominant current systems flowing southward and westward. These sediment bodies evolve laterally to distinct external geometries, such as sand shoals in shallow water and sand sheets in the vicinity of larger sand banks that indicate moderate current velocities. In addition, pre‐existing physiography is considered to play a role in the generation of certain sediment bodies, developed over inclined surfaces or confined laterally by elevations. Relationships between superimposed bedforms (mostly very large dunes) and underlying sediment bodies vary across the study area. Most superimposed bedforms occur over the complex mosaic of sediment banks and sheets, suggesting the interaction of several high‐energy currents with different directions, such as tidal and/or wind‐driven currents. Copyright © 2010 John Wiley & Sons, Ltd.     

Coastal dune fields at the São Francisco River strandplain,northeastern Brazil: morphology and environmental controls

Extensive coastal dune ?elds occur on the Quaternary strandplain associated with the São Francisco River mouth. Two different generations of dunes are identi?ed. One is inactive, already ?xed by vegetation, comprising parabolic dunes. The other generation is active, bordering the present‐day shoreline and transgressing over the inactive dune ?eld. Three morphological provinces in the active coastal dune ?elds are recognized. On the updrift side of the São Francisco River mouth, they are: (a) sand‐sheet with shrub coppice and shadow dunes; (b) isolated dunes of the barchan‐transversal type up to 5 m high, and interdune areas; and (c) a 23 m high compound dune, with superimposed small dunes. The same provinces are recognized on the downdrift side of the river mouth, with two important exceptions: the barchan‐transversal and compound dunes are replaced, respectively, by (i) zibar‐type dunes up to 5 m high, and (ii) a 19 m high precipitation dune, which is associated with numerous blowouts. The prevailing eastern winds from August to January favour the development of the aeolian bedforms and the migration of dunes. The shoreline orientation almost transversal to the winds and the great supply of ?ne‐grained sediments contribute to the formation of barchan‐transversal types and compound dunes in the updrift side. On the other hand, in the downdrift side the shoreline orientation is almost parallel to the prevailing winds. This fact, in association with a coarser grain size in the beachface, favours the formation of zibar‐type and precipitation dunes with numerous blowouts. The rate of migration of individual dunes is about 20 to 24 m per year. This study suggests that the aeolian sedimentation is a relatively recent phenomenon at the Quaternary strandplain of the São Francisco River. The ?rst generation of dune ?elds initiated some time after 3000 years BP and the second generation originated some centuries ago. Copyright © 2004 John Wiley & Sons, Ltd.     

Detailed bed topography and sediment load measurements for two stepdown flows in a laboratory flume

Streams and rivers, particularly smaller ones, often do not maintain steady flow rates for long enough to reach equilibrium conditions for sediment transport and bed topography. In particular, streams in small watersheds may be subject to rapidly changing hydrographs, and relict bedforms from previous high flows can cause further disequilibrium that complicates the prediction of sediment transport rates. In order to advance the understanding of how bedforms respond to rapid changes in flow rate,...     

The influence of groundwater depth on coastal dune development at sand flats close to inlets

A cellular automata model is used to analyze the effects of groundwater levels and sediment supply on aeolian dune development occurring on sand flats close to inlets. The model considers, in a schematized and probabilistic way, aeolian transport processes, groundwater influence, vegetation development, and combined effects of waves and tides that can both erode and accrete the sand flat. Next to three idealized cases, a sand flat adjoining the barrier island of Texel, the Netherlands, was chosen as a case study. Elevation data from 18 annual LIDAR surveys was used to characterize sand flat and dune development. Additionally, a field survey was carried out to map the spatial variation in capillary fringe depth across the sand flat. Results show that for high groundwater situations, sediment supply became limited inducing formation of Coppice-like dunes, even though aeolian losses were regularly replenished by marine import during sand flat flooding. Long dune rows developed for high sediment supply scenarios which occurred for deep groundwater levels. Furthermore, a threshold depth appears to exist at which the groundwater level starts to affect dune development on the inlet sand flat. The threshold can vary spatially depending on external conditions such as topography. On sand flats close to inlets, groundwater is capable of introducing spatial variability in dune growth, which is consistent with dune development patterns found on the Texel sand flat.     

Early‐stage aeolian protodunes: Bedform development and sand transport dynamics

Early‐stage aeolian bedforms, or protodunes, are elemental in the continuum of dune development and act as essential precursors to mature dunes. Despite this, we know very little about the processes and feedback mechanisms that shape these nascent bedforms. Whilst theory and conceptual models have offered some explanation for protodune existence and development, until now, we have lacked the technical capability to measure such small bedforms in aeolian settings. Here, we employ terrestrial laser scanning to measure morphological change at the high frequency and spatial resolution required to gain new insights into protodune behaviour. On a 0.06 m high protodune, we observe vertical growth of the crest by 0.005 m in two hours. Our direct measurements of sand transport on the protodune account for such growth, with a reduction in time‐averaged sediment flux of 18% observed over the crestal region. Detailed measurements of form also establish key points of morphological change on the protodune. The position on the stoss slope where erosion switches to deposition is found at a point 0.07 m upwind of the crest. This finding supports recent models that explain vertical dune growth through an upwind shift of this switching point. Observations also show characteristic changes in the asymmetric cross‐section of the protodune. Flow‐form feedbacks result in a steepening of the lee slope and a decline in lower stoss slope steepness (by 3°), constituting a reshaping of protodune form towards more mature dune morphology. The approaches and findings applied here, (a) demonstrate an ability to quantify processes at requisite spatial and temporal scales for monitoring early‐stage dune evolution, (b) highlight the crucial role of form‐flow feedbacks in enabling early‐stage bedform growth, alluding to a fluctuation in feedbacks that require better representation in dune models, and (c) provide a new stimulus for advancing understanding of aeolian bedforms. Copyright © 2017 John Wiley & Sons, Ltd.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

Large-scale bedforms along a tideless outer shelf setting in the western Mediterranean

High-resolution multibeam swath-bathymetry and sediment samples were collected across the outer shelf region of the Columbretes Islands (southern Ebro continental shelf, western Mediterranean Sea). Bathymetric data from the submerged part of the Columbretes volcanic system revealed the presence of three main relict sand bodies along the outer shelf, at 80–116 m depth range, above which asymmetric and slightly asymmetric large and very large 2D and 3D subaqueous dunes were observed. These bed features were recognized, mapped and quantified with the aim of evaluating their potential formation mechanisms in relation to the local hydrodynamic and morphologic settings of the area. Dunes range from 150 to 760 m in wavelength and from tens of centimeters to 3 m in height, and are among the longest ever recognized in an outer shelf region. These bedforms are mostly composed of medium-sized sandy sediments, presumably coming from the degraded relict sand bodies on top of which they have developed, mixed with fine fractions from the recent draping holocenic sediments. The orientation of the dunes is SSW, progressively turning W towards the southernmost sector of the area, following the trend of the shelf-edge. Contemporary hydrodynamic measurements at the Ebro continental shelf-edge show that recorded currents are insufficient to form the observed bedforms and that stronger currents are required for sediment mobilization and dune formation. Based on their morphology and orientation, it is proposed that these bedforms are produced by the action of the southward-flowing Liguro-Provençal-Catalan (LPC) geostrophic current. The LPC probably reaches high near-bottom currents during energetic hydrodynamic events through interactions with the seafloor morphology of the study area. Subaqueous dunes are expected to be basically inactive features with respect to present-day processes, although they can be reactivated during high-energy events. The small Δh/λ ratio measured in the dune fields of the Columbretes shelf revealed that the dune heights fall below the values predicted by the Flemming (1988) global equation, as observed in other outer shelf settings also dominated by unidirectional flows. This may suggest a different morphodynamic character of large dunes formed on outer shelves in a micro-tidal regime.     

Experimental study on transient and steady‐state dynamics of bedforms in supply limited configuration

The purpose of the present study is to investigate experimentally the development of bedforms in a configuration where the sediment supply is limited. The experimental setup is a rectangular closed duct combining an innovative system to control the rate of sediment supply Q_in , and a digitizing system to measure in real time the 3D bedform topography. We carried out different sets of experiments with two sediment sizes (100 µm and 500 µm) varying both the sediment supply and the water flow rate to obtain a total of 46 different configurations. After a transient phase, steady sub‐centimeter bedforms of various shapes have been observed: barchans dunes, straight transverse dune, linguoid transverse dunes and bedload sheets. Height, spacing, migration speed, and mean bed elevation of the equilibrium bedforms were measured. For a given flow rate, two regimes were identified with fine sediment: (i) a monotonic increasing regime where the equilibrium bedform height and velocity increase with the sediment supply rate Q_in and (ii) an invariant regime for which both parameters are almost independent of Q_in. For coarse sediment, only the first regime is observed. We interpret the saturation of height and velocity for fine sediment bedforms as the transition from a supply‐limited regime to a transport‐limited regime in which the bedload flux has reached its maximum value under the prevailing flow conditions. We also demonstrate that all experiments can be rescaled if the migration speed and height of the bedforms are, respectively, divided and multiplied by the cube of the shear velocity. This normalization is independent of grain size and of bedform morphology. These experimental results provide a new quantification of the factors controlling equilibrium height and migration speed of bedforms in supply‐limited conditions against which theoretical and numerical models can be tested.     

Characterizing and identifying bedforms in the wandering reach of the lower Yellow River

The lower Yellow River （LYR） is a fully alluvial system with a fine-grained bed that has a high proportion of silt.Bathymetric survey data collected with a Multi-Beam Echo Sounder （MBES） from the wandering reach of the LYR indicates that the bedforms are characterized by large aspect ratios （wavelength/height）and low lee-side angles.Since the Xiaolangdi Reservoir （XLD） has been operational in the middle reach of the Yellow River,bedforms have been dominated by two-scales of dunes,that is,a frame...     

Suspended sediment transport and deposition over a dune: Río Paraná, Argentina

Field data from the Rio Paraná, Argentina, are used to examine patterns of suspended sediment transport over a sand dune. Measurements of three‐dimensional velocity are made with an acoustic Doppler current profiler whilst suspended sediment concentration and particle size have been quantified using a laser in situ sediment scattering transmissometer. Suspended sediment concentration and streamwise and vertical sediment flux are highest close to the bed, with an upward vertical flux over the stoss side of the dune and downward flux over the lee side. Suspended sediment concentrations are higher over the crest compared with the trough and suspended sediment is coarsest near the bed. About 17% of the suspended‐load transported over the crest is deposited in the lee side before it reaches the trough. Most of this deposited sand is coarser sediment that originates close to the bed over the crest, a result consistent with simulations based on the model of Mohrig and Smith (Water Resources Research 1996; 32: 3207–3217) for the excursion lengths of sediment dispersed in the lee side of a dune. Copyright © 2009 John Wiley & Sons, Ltd.     

Velocity profiles and bed shear stress over various bed configurations in a river bend

Vertical velocity profiles measured over various bed configurations (plane beds, ripples, and dunes) in. the meandering River South Esk, Glen Clova, Scotland are presented on semilogarithmic paper. Local bed shear stress and roughness height are calculated from the lowermost parts of the profiles using the Karman-Prandtl law of the wall; these parameters, and the geometrical properties of the profiles, are related to the various bed configurations. A graphical model is used to identify profiles developed on specific regions of dune geometry, in order to discriminate those profiles that define bed shear effective in transporting sediment over dunes. An assessment is made of the errors involved in estimating local mean velocity from extrapolating the law of the wall to the water surface. A Darcy-Weisbach friction coefficient is related to bed configuration and local stream power.     

Development of bedforms due to waves blocked by a counter current

Experiments are conducted in a laboratory flume on the propagation of a surface wave against unidirectional flow with a sediment bed. This article presents the spatial variation of bedforms induced by the wave-blocking phenomenon by a suitably tuned uniform fluid flow and a counter-propagating wave. The occurrence of wave-blocking is confirmed by finding a critical wave frequency in a particular flow discharge in which the waves are effectively blocked and is established using the linear dispersion relation. The purpose of this work is to identify wave-blocking and its influence on the development of bedforms over the sediment bed. Interestingly bedform signatures are observed at a transition of bedforms in three zones, with asymmetric ripples having a steeper slope downstream face induced by the incoming current, followed by flat sand bars beneath the wave-blocking zone and more symmetric ripples below the wave-dominated region at the downstream. This phenomenon suggests that the sediment bed is segmented into three different regions of bed geometry along the flow. The deviations of mean flows, Reynolds stresses, turbulent kinetic energy, and power spectral density due to the wave-blocking phenomenon are presented along the non-uniform flow over sediment bed. The bottom shear stress, bed roughness and stochastic nature of the bedform features are also discussed. The results are of relevance to engineers and geoscientists concerned with contemporary process as well as those interested in the interpretation of palaeoenvironmental conditions from fossil bedforms. © 2019 John Wiley & Sons, Ltd.     

Dune field development,interactions and boundary conditions for crescentic and stellate megadunes of the Al Liwa Basin,the Empty Quarter

Within the greater Ar Rub' al Khali (Empty Quarter) sand sea lies an internal depocentre, the Al Liwa Basin, which comprises a variety of mega‐scale dune types. Crescentic dunes dominant the north of the basin while megadunes of stellate or star form are a major landform of the south‐eastern reaches. Their development into dune fields is determined by the style and rate of dune–dune interactions, the boundary conditions imposed by a multi‐modal wind regime, fluctuating groundwater levels, and sediment availability under an assortment of climatic conditions throughout the Quaternary. As a result, dune field patterns are a collective response to these perturbations in space, time and environment. The R‐statistic is a collective measure of these responses, and is a metric capable of identifying the degree of pattern maturity or self‐organization of the aeolian system, and the pathways from which patterns evolve. The spatial signature of the southerly located star dunes is characterized by two definitive patterns of organization: the first, one of complete spatial randomness, the second, a low degree of spatial uniformity. In isolation, these results appear to be unrelated to those for crescentic dunes of the region in which a significantly higher degree of pattern dispersion is the norm. However, when spatial statistical measures are integrated with the theoretical understanding of dune–dune interactions and the involvement of environmental agents, the complex morphodynamic pathways and linkages between regional dune fields is better understood. In this case, both constructive (e.g. merging, lateral linking) and regenerative activity (e.g. calving) have played important roles in the development of dune size, and associated adjustments in spacing, and dune numbers, and subsequently dune field patterns. Synergetic patterns are emblematic of this vast dunescape, whereby transitional geographic, morphologic, dimensional and environmental modifications exist between the mega‐crescentic and mega‐stellate dunes of the Empty Quarter. Copyright © 2012 John Wiley & Sons, Ltd.     

Dune deformation in a multi‐directional wind regime: White Sands Dune Field,New Mexico

As with most dune fields, the White Sands Dune Field in New Mexico forms in a wind regime that is not unimodal. In this study, crescentic dune shape change (deformation) with migration at White Sands was explored in a time series of five LiDAR‐derived digital elevation models (DEMs) and compared to a record of wind direction and speed during the same period. For the study period of June 2007 to June 2010, 244 sand‐transporting wind events occurred and define a dominant wind mode from the SW and lesser modes from the NNW and SSE. Based upon difference maps and tracing of dune brinklines, overall dune behavior consists of crest‐normal migration to the NE, but also along‐crest migration of dune sinuosity and stoss superimposed dunes to the SE. The SW winds are transverse to dune orientations and cause most forward migration. The NNW winds cause along‐crest migration of dune sinuosity and stoss bedforms, as well as SE migration of NE‐trending dune terminations. The SSE winds cause ephemeral dune deformation, especially crestal slipface reversals. The dunes deform with migration because of differences in dune‐segment size, and differences in the lee‐face deposition rate as a function of the incidence angle between the wind direction and the local brinkline orientation. Each wind event deforms dune shape, this new shape then serves as the boundary condition for the next wind event. Shared incidence‐angle control on dune deformation and lee‐face stratification types allows for an idealized model for White Sands dunes. Copyright © 2015 John Wiley & Sons, Ltd.     

Modulation of the flow structure by progressive bedforms in the Kinoshita meandering channel

An in‐house fully three‐dimensional general‐purpose finite element model is applied to solve the hydrodynamic structure in a periodic Kinoshita‐generated meandering channel. The numerical model solves the incompressible Reynolds‐averaged Navier–Stokes equations for mass and momentum, while solving the k ? ε equations for turbulence. The free surface is described by the rigid‐lid approximation (using measured water surface data) for flat (smooth‐bed) and self‐formed (rough‐bed) conditions. The model results are compared against experimental measurements in the ‘Kinoshita channel’, where three‐dimensional flow velocities and turbulence parameters were measured. This validation was carried out for the upstream‐valley meander bend orientation under smooth (flat bed) conditions. After validation, several simulations were carried out to predict the hydrodynamics in conditions where either it was not possible to perform measurements (e.g. applicability of the laboratory acoustic instruments) and to extrapolate the model to other planform configurations. For the flat smooth‐bed case, a symmetric (no skewness) planform configuration was modeled and compared to the upstream‐skewed case. For the self‐formed rough‐bed case, prediction of the hydrodynamics during the progression of bedforms was performed. It appears that the presence of bedforms on a bend has the following effects: (i) the natural secondary flow of the bend is disrupted by the presence of the bedforms, thus depending on the location of the dune, secondary flows might differ completely from the traditional orientation; (ii) an increment on both the bed and bank shear stresses is induced, having as much as 50% more fluvial erosion, and thus a potential increment on the migration rate of the bend. Implications on sediment transport and bend morphodynamics are also discussed in the paper. Copyright © 2013 John Wiley & Sons, Ltd.