Isotopic and molecular composition of coal-bed gas in the Amasra region (Zonguldak basin—western Black Sea)

Previous studies on the coal-bed methane potential of the Zonguldak basin have indicated that the gases are thermogenic and sourced by the coal-bearing Carboniferous units. In this earlier work, the origin of coal-bed gas was only defined according to the molecular composition of gases and to organic geochemical properties of the respective source rocks, since data on isotopic composition of gases were not available. Furthermore, in the western Black Sea region there also exist other source rocks, which may have contributed to the coal-bed gas accumulations. The aim of this study is to determine the origin of coal-bed gas and to try a gas-source rock correlation. For this purpose, the molecular and isotopic compositions of 13 headspace gases from coals and adjacent sediments of two wells in the Amasra region have been analyzed. Total organic carbon (TOC) measurements and Rock-Eval pyrolysis were performed in order to characterize the respective source rocks. Coals and sediments are bearing humic type organic matter, which have hydrogen indices (HI) of up to 300 mgHC/gTOC, indicating a certain content of liptinitic material. The stable carbon isotope ratios (δ¹³C) of the kerogen vary from −23.1 to −27.7‰. Air-free calculated gases contain hydrocarbons up to C₅, carbon dioxide (<1%) and a considerable amount of nitrogen (up to 38%). The gaseous hydrocarbons are dominated by methane (>98%). The stable carbon isotope ratios of methane, ethane and propane are defined as δ¹³C₁: −51.1 to −48.3‰, δ¹³C₂: −37.9 to −25.3‰, δ¹³C₃: −26.0 to −19.2 ‰, respectively. The δD₁ values of methane range from −190 to −178‰. According to its isotopic composition, methane is a mixture, partly generated bacterially, partly thermogenic. Molecular and isotopic composition of the gases and organic geochemical properties of possible source rocks indicate that the thermogenic gas generation took place in coals and organic rich shales of the Westphalian-A Kozlu formation. The bacterial input can be related to a primary bacterial methane generation during Carboniferous and/or to a recent secondary bacterial methane generation. However, some peculiarities of respective isotope values of headspace gases can also be related to the desorption process, which took place by sampling.     

Origins and accumulation of organic matter in expanded Albian to Santonian black shale sequences on the Demerara Rise, South American margin

Ocean Drilling Program Leg 207 recovered thick sequences of Albian to Santonian organic-carbon-rich claystones at five drill-sites on the Demerara Rise in the western equatorial Atlantic Ocean. Dark-colored, finely laminated, Cenomanian–Santonian black shale sequences contain between 2% and 15% organic carbon and encompass Oceanic Anoxic Events 2 and 3. High Rock-Eval hydrogen indices signify that the bulk of the organic matter in these sequences is marine in origin. However, δ¹³C_org values lie mostly between −30‰ and −27‰, and TOC/TN ratios range from 15 to 42, which both mimic the source signatures of modern C₃ land plants. The contradictions in organic matter source indicators provide important implications about the depositional conditions leading to the black shale accumulations. The low δ¹³C_org values, which are actually common in mid-Cretaceous marine organic matter, are consequences of the greenhouse climate prevailing at that time and an associated accelerated hydrologic cycle. The elevated C/N ratios, which are also typical of black shales, indicate depressed organic matter degradation associated with low-oxygen conditions in the water column that favored preservation of carbon-rich forms of marine organic matter over nitrogen-rich components. Underlying the laminated Cenomanian–Santonian sequences are homogeneous, dark-colored, lower to middle Albian siltstones that contain between 0.2% and 9% organic carbon. The organic matter in these rocks is mostly marine in origin, but it occasionally includes large proportions of land-derived material.     

Stable carbon isotope compositions and source rock geochemistry of the giant gas accumulations in the Ordos Basin, China

Ordos Basin, the second largest sedimentary basin in China, contains enormous natural gas resources. Each of the four giant gas fields discovered so far in this basin (i.e., Sulige, Yulin, Wushenqi and Jingbian) has over 100 billion cubic meters (bcm) or 3.53 trillion cubic feet (tcf) of proven gas reserves. This study examines the stable carbon isotope data of 125 gas samples collected from the four giant gas fields in the Ordos Basin. Source rocks in the Upper Paleozoic coal measures are suggested by the generally high δ¹³C values of C₁–C₄ gaseous hydrocarbons in the gases from the Sulige, Yulin and Wushenqi gas fields. While the δ¹³C_iC4 value is higher than that of the δ¹³C_nC4, the dominant ranges for the δ¹³C₁, δ¹³C₂, and δ¹³C₃ values in these Upper Paleozoic reservoired gases are −34 to −32‰, −27 to −23‰, and −25 to −24‰, respectively. The δ¹³C values of methane, benzene and toluene in gases from the Lower Paleozoic reservoirs of the Jingbian field indicate a significant contribution from humic source rocks, as they are similar to those in the Upper Paleozoic reservoirs of the Sulige, Yulin and Wushenqi gas fields. However, the wide variation and reversal in the δ¹³C₁, δ¹³C₂ and δ¹³C₃ values in the Jinbian gases cannot be explained using a single source scenario, thus the gases were likely derived dominantly from the Carboniferous-Permian coal measures with some contribution from the carbonates in the Lower Permian Taiyuan Formation. The gas isotope data and extremely low total organic carbon contents (<0.2% TOC) suggest that the Ordovician Majiagou Formation carbonates are unlikely to be a significant gas source rock, thus almost all of the economic gas accumulations in the Ordos Basin were derived from Upper Paleozoic source rocks.     

Environmental control of carbon isotope variations in Pennsylvania black-shale sequences, Midcontinent, U.S.A.

A reversal of the conventional carbon isotope relationship, “terrestrial-lighter-than-marine” organic matter, has been documented for two Pennsylvanian (Desmoinesian) cyclothemic sequence cores from the Midcontinent craton of the central United States. “Deep” water organic-rich phosphatic black shales contain a significant proportion of algal-derived marine organic matter (as indicated by organic petrography, Rock-Eval hydrogen index and ratios) and display the lightest δ¹³C-values (max −27.80‰ for kerogen) while shallower water, more oxic facies (e.g. fossiliferous shales and limestones) contain dominantly terrestrial organic matter and have heavier δ¹³C_kerogen-values (to −22.87‰ for a stratigraphically adjacent coal). δ¹³C-values for extract fractions were relatively homogeneous for the organic-rich black shales with the lightest fraction (often the aromatics) being only 1‰, or less, more negative than the kerogen. Differences between extract fractions and kerogens were much greater for oxic facies and coals (e.g. saturates nearly 5‰ lighter than the kerogen).A proposed depositional model for the black shales calls upon a large influx of nutrients and humic detritus to the marine environment from the laterally adjacent, extremely widespread Pennsylvanian (peat) swamps which were rapidly submerged by transgression of the epicontinental seas. In this setting marine organisms drew upon a CO₂-reservoir which was in a state of disequilibrium with the atmosphere, being affected by isotopically light “recycled-CO₂” derived from the decomposition of peaty material in the water column and possibly from the anoxic diagenesis of organic matter in the sediments.     

Molecular and carbon isotopic analysis of individual biological markers: evidence for sources of organic matter and paleoenvironmental conditions in the Upper Ordovician Maquoketa Group, Illinois Basin, U.S.A.

Variations in the carbon isotopic composition (δ¹³C) of pristane, phytane, n-heptadecane (n-C₁₇), C₂₉ ααα 20R sterane, and aryl isoprenoids provide evidence for a diverse community of algal and bacterial organisms in organic matter of the Upper Ordovician Maquoketa Group of the Illinois Basin. Carbon isotopic compositions of pristane and phytane from the Maquoketa are positively covariant (r = 0.964), suggesting that these compounds were derived from a common source inferred to be primary producers (algae) from the oxygenated photic zone. A variation of 3‰ in δ¹³C values (−31 to −34‰) for pristane and phytane indicates that primary producers utilized variable sources of inorganic carbon. Average isotopic compositions of n-C₁₇ (−32‰) and C₂₉ ααα 20R sterane (−31‰) are enriched in ¹³C relative to pristane and phytane (−33‰) suggesting that these compounds were derived from a subordinate group of primary producers, most likely eukaryotic algae. In addition, a substantial enrichment of ¹³C in aryl isoprenoids (−14 to −18‰) and the identification of tetramethylbenzene in pyrolytic products of Maquoketa kerogen indicate a contribution from photosynthetic green sulfur bacteria to the organic matter. The presence of anaerobic, photosynthetic green sulfur bacteria in organic matter of the Maquoketa indicates that anoxic conditions extended into the photic zone.The δ¹³C of n-alkanes and the identification of an unusual suite of straight-chain n-alkylarenes in the m/z 133 fragmentograms of Ordovician rocks rich in Gloeocapsomorpha prisca (G. prisca) indicate that G. prisca did not contribute to the organic matter of the Maquoketa Group.     

Carbon isotopes of Middle–Lower Jurassic coal-derived alkane gases from the major basins of northwestern China

Coal-derived hydrocarbons from Middle–Lower Jurassic coal-bearing strata in northwestern China are distributed in the Tarim, Junggar, Qaidam, and Turpan-Harmi basins. The former three basins are dominated by coal-derived gas fields, distributed in Cretaceous and Tertiary strata. Turpan-Harmi basin is characterized by coal-derived oil fields which occur in the coal measures. Based on analysis of gas components and carbon isotopic compositions from these basins, three conclusions are drawn in this contribution: 1) Alkane gases with reservoirs of coal measures have no carbon isotopic reversal, whereas alkane gases with reservoirs not of coal measures the extent of carbon isotopic reversal increases with increasing maturity; 2) Coal-derived alkane gases with high δ¹³C values are found in the Tarim and Qaidam basins (δ¹³C₁: − 19.0 to − 29.9‰; δ¹³C₂: − 18.8 to − 27.1‰), and those with lowest δ¹³C values occur in the Turpan-Harmi and Junggar basins (δ¹³C₁: − 40.1 to − 44.0‰; δ¹³C₂: − 24.7 to − 27.9‰); and 3) Individual specific carbon isotopic compositions of light hydrocarbons (C_5–8) in the coal-derived gases are lower than those in the oil-associated gases. The discovered carbon isotopic reversal of coal-derived gases is caused by isotopic fractionation during migration and secondary alteration. The high and low carbon isotopic values of coal-derived gases in China may have some significance on global natural gas research, especially the low carbon isotope value of methane may provide some information for early thermogenic gases. Coal-derived methane typically has much heavier δ¹³C than that of oil-associated methane, and this can be used for gas–source rock correlation. The heavy carbon isotope of coal-derived ethane is a common phenomenon in China and it shed lights on the discrimination of gas origin. Since most giant gas fields are of coal-derived origin, comparative studies on coal-derived and oil-associated gases have great significance on future natural gas exploration in the world.     

Geochemistry and occurrence of inorganic gas accumulations in Chinese sedimentary basins

Inorganic gases are commonly seen in eastern China and occasionally in southern China from the shallow water columns above hot and cold springs. The gases contain 68% to nearly 100% CO₂, with δ¹³C_CO2 and δ¹³C₁ values in the range of −1.18‰ to −6.00‰ and −19.48‰ to −24.94‰, respectively. All of the 34 large inorganic CO₂ and one inorganic methane accumulations discovered in China are distributed in eastern parts of the country, from both onshore and continental shelf basins. No commercial inorganic gas accumulation has been found in central and western China. This is a review of the occurrence and geochemical characteristics of inorganic gas accumulations in Chinese sedimentary basins. A detailed study of gas samples collected from four representative inorganic CO₂ pools and one possible inorganic methane pool indicates that inorganic alkane gases typically show δ¹³C₁ values greater than −10‰ versus PDB (mostly −30‰), with a positive stable carbon isotope sequence of δ¹³C₁ < δ ¹³C₂ < δ¹³C₃ < δ ¹³C₄. In contrast, the δ¹³C₁ values of biogenic alkane gases are lighter than −30‰, with a negative isotope sequence (i.e. δ¹³C₁ > δ¹³C₂ > δ ¹³C₃ > δ¹³C₄). Inorganic gases also tend to show less negative δ¹³C_CO2 values (−10‰) than biogenic gases (<−10‰).     

Oxygen and carbon isotope zonations of wall rocks around the Kamioka Pb---Zn skarn deposits, central Japan: application to prospecting

Mapping of the oxygen and carbon isotopic composition of hydrothermally altered wall rocks was conducted during blind ore prospecting for Pb---Zn skarn deposits in the Kamioka mining district, central Japan. The wall rocks consist of heterogeneous rock units. Oxygen and carbon isotope ratios were determined for 35 limestones and 33 silicate rocks from the area around the Mozumi deposit (3 km × 3 km) in the Kamioka mining district. The results (δ¹⁸O_spsmow of − 1.1 to + 17.3% and δ¹³C_sppdb of − 5.0 to +4.8% for limestones, and δ¹⁸O_spsmow of −0.8 to + 12.5% for silicate rocks) show isotope zonations of the wall rocks, with lighter isotopic compositions toward the center of mineralization. The isotope zonations likely formed by interaction of thermal waters with the wall rocks during skarn mineralization. The isotopically light zone indicates a higher paleotemperature or higher water-to-rock ratios, and occurs in the footwall of the 7Gohi fault. This structure is spatially related to the distribution of orebodies, indicating that the fault was the main conduit of the ore-forming fluids. The oxygen and carbon isotopic compositions of limestones vary regularly across limestone bodies hosted by the silicate wall rocks, suggesting that the thermal waters were pervasive throughout the wall rocks at the time of mineralization.An isotopically light zone was also found in the southeastern corner of the study area, where significant mineralization had yet to be identified. This suggested an extension of the extinct hydrothermal system to this area, and the possibility of hidden orebodies underneath. Recent drilling in this area has intercepted a zone 45 m thick with a grade of 13.4% Zn, 0.03% Pb and 8 g per metric ton at about 380 m depth.     

C and N NMR analysis of some fungal melanins in comparison with soil organic matter

A variety of fungal melanins with natural ¹⁵N abundance are characterized by solid-state ¹³C and ¹⁵N NMR spectroscopy and are compared to solid-state ¹³C and ¹⁵N NMR spectra of organic matter from representative soils. In all solid-state ¹⁵N NMR spectra the peptide/amide region (−220 to −285 ppm) dominates with more than 70% of the total intensity. The region between −285 and −375 ppm, assigned to amino and ammonium groups, always contains more than half of the remaining intensity. The area in the region from −30 to −220 ppm, where aromatic heterocycles would show signals, makes up less than 10% of the total intensity. These findings call into question common structural models for melanins. The solid-state ¹³C NMR spectra, on the other hand, reveal large differences when the melanins are compared to each other, and to composts and soils. The concentration of the aromatic carbon varies from 5 to 40% in the melanin series. The ratio C_aro/N_tot and C_ali/N_tot were calculated, and confirm that nitrogen in these samples is bound in C_a-groups rather than in aromatic heterocyclic structures.     

Isotopic fractionation associated with biosynthesis of fatty acids by a marine bacterium under oxic and anoxic conditions

Shewanella putrefaciens (Strain MR-4), a gram negative facultative marine bacterium, was grown to stationary phase under both aerobic and anaerobic conditions using lactate as the sole carbon source. Aerobically-produced cells were slightly enriched in ¹³C (+1.5‰) relative to the lactate carbon source, whereas those from anaerobic growth were depleted in ¹³C (−2.2‰). The distribution of fatty acids produced under aerobic conditions was similar to that resulting from anaerobic growth, being dominated by C_16:1 ω7 and C_16:0 fatty acids with a lesser amount of the C_18:1 ω7 component. Low concentrations of saturated even numbered normal fatty acids in the C₁₄ to C₁₈ range, and iso-C_15:0 were synthesized under both conditions. Fatty acids from anaerobic cultures (average δ¹³C=−37.8‰) were considerably depleted in ¹³C relative to their aerobically-synthesized counterparts (−28.8‰). The distinct differences in isotopic composition of both whole cells and individual fatty acid components result from differences in assimilation pathways. Under aerobic conditions, the primary route of assimilation involves the pyruvate dehydrogenase enzyme complex which produces acetyl-CoA, the precursor to lipid synthesis. In contrast, under anaerobic conditions formate, and not acetate, is the central intermediate in carbon assimilation with the precursors to fatty acid synthesis being produced via the serine pathway. Anaerobically-produced bacterial fatty acids were depleted by up to 12‰ relative to the carbon source. Therefore, detection of isotopically depleted fatty acids in sediments may be falsely attributed to a terrestrial origin, when in fact they are the result of bacterial resynthesis.     

Heterogeneous organic matter from the surface horizon of a temperate zone marsh

Abundance, bulk chemical composition and sources of the organic matter in the surface horizon of the permanently water-covered part of an intermittently water-covered marsh were investigated. Lipids, insoluble non-hydrolysable macromolecular organic matter and black carbon fractions were isolated and examined via Rock-Eval pyrolysis, elemental analysis, Fourier transform infrared spectroscopy, isotopic (δ¹³C, δ¹⁵N) methods and high resolution transmission electron microscopy. Integration of bulk Rock-Eval data, elemental and isotopic composition, together with spectroscopic features, suggested immature Type III organic matter derived mainly from C₃ vascular plants. The distribution of n-alkanes from the non-aromatic lipid fraction exhibited the importance of emergent macrophytes and terrestrial plants, as well as a moderate input of submerged/floating macrophytes to the source biomass. Mathematical deconvolution of a Rock-Eval pyrogram revealed highly heterogeneous organic matter composed of a mixture of thermally labile biopolymers (36%) at various stages of decomposition, as well as humic substances and highly refractory organic matter (64%) in the whole sample. Markedly lower heterogeneity and aliphaticity, together with a higher proportion of humic substances and highly refractory organic matter (ca. 84%) were observed in the macromolecular fraction. An abundant contribution of black carbon to the macromolecular fraction was indicated by mathematical deconvolution of the Rock-Eval pyrogram and was clearly shown by the isolation of this fraction and chemical oxidation. The black carbon fraction appeared to account for ca. half of the macromolecular fraction, the carbon in these two fractions representing 30% and 14% of the initial carbon, respectively. The electron microscopy observations directly evidenced the presence of black carbon, which was comprised of both amorphous poorly organized particles and highly ordered onion-shaped particles.     

Stable isotopes of carbon dioxide in soil gas over massive sulfide mineralization at Crandon, Wisconsin

Stable isotope ratios of oxygen and carbon were determined for CO₂ in soil gas in the vicinity of the massive sulfide deposit at Crandon, Wisconsin with the objective of determining the source of anomalously high CO₂ concentrations detected previously by McCarthy et al. (1986). Values of δ¹³C in soil gas CO₂ from depths between 0.5 and 1.0 m were found to range from −12.68‰ to −20.03‰ (PDB). Organic carbon from the uppermost meter of soil has δ¹³C between −24.1 and −25.8‰ (PDB), indicating derivation from plant species with the C₃ (Calvin) type of photosynthetic pathway. Microbial decomposition of the organic carbon and root respiration from C₃ and C₄ (Hatch-Slack) plants, together with atmospheric CO₂ are the likely sources of carbon in soil gas CO₂. Values of δ¹⁸O in soil-gas CO₂ range from 32 to 38‰ (SMOW). These δ¹⁸O values are intermediate between that calculated for CO₂ gas in isotopic equilibrium with local groundwaters and that for atmospheric CO₂. The δ¹⁸O data indicate that atmospheric CO₂ has been incorporated by mixing or diffusion. Any CO₂ generated by microbial oxidation of organic matter has equilibrated its oxygen isotopes with the local groundwaters.The isotopic composition of soil-gas CO₂ taken from directly above the massive sulfide deposit was not distinguishable from that of background samples taken 1 to 2 km away. No enrichment of the δ¹³C value of soil-gas CO₂ was observed, contrary to what would be expected if the anomalous CO₂ were derived from the dissolution of Proterozoic marine limestone country rock or of Paleozoic limestone clasts in glacial till. Therefore, it is inferred that root respiration and decay of C₃ plant material were responsible for most CO₂ generation both in the vicinity of the massive sulfide and in the “background” area, on the occasion of our sampling. Interpretation of our data is complicated by the effects of rainfall, which significantly reduced the magnitude of the CO₂ anomaly. Therefore, we cannot rule out the possible mechanism of carbonate dissolution driven by pyrite oxidation, as proposed by Lovell et al. (1983) and McCarthy et al. (1986). Further work is needed on seasonal and daily variations of CO₂ concentrations and stable isotope ratios in various hydrogeologic and ecologic settings so that more effective sampling strategies can be developed for mineral exploration using soil gases.     

Micro-FTIR spectroscopy of liptinite macerals in coal

Reflectance FTIR microspectroscopy has been used to investigate the chemical structure of the liptinite macerals, alginite, bituminite, sporinite, cutinite and resinite in bituminous coals of Carboniferous to Tertiary age. In comparison with the spectra of vitrinite in the same coals, the micro-FTIR spectra of liptinite macerals are characterized by stronger aliphatic CH_x absorptions at 3000–2800 and 1460–1450 cm⁻¹, less intense aromatic C=C ring stretching vibration and aromatic CH out of plane deformation at 1610–1560 and 900–700 cm⁻¹ respectively and various intense acid C=O group absorptions at 1740–1700 cm⁻¹. The peaks at 1000–900 cm⁻¹ due to aliphatic CH₂ wagging vibrations in olefins and at 730–720 cm⁻¹ due to CH₂ rocking vibration in long chain aliphatic substances ([CH₂]_n, n≥4), are characteristic of liptinite macerals. Collectively the micro-FTIR spectral characteristics indicate that liptinite is composed of greater numbers of long chain aliphatics, fewer aromatics and a broader range of oxygen-containing groups than other macerals. Marked differences exist in micro-FTIR spectra within the liptinite maceral group. Alginite has the strongest aliphatic and least aromatic absorptions followed by bituminite, resinite, cutinite and sporinite. The aliphatic components in alginite are the longest chained and least branched whereas those in sporinite are the shortest chained and most branched. Bituminite, resinite and cutinite are intermediate. Notable differences in micro-FTIR spectra of individual liptinite macerals, such as intensities and peak locations of aromatic C=C in alginite, C=O groups in bituminite and resinite and substituted aromatic CH and C–O–C groups in cutinite and sporinite, also exist, which are attributed to differences in depositional environments or biotaxonomy.     

Simultaneous determination of sulfide, polysulfides and thiosulfate as an aid to ore exploration

The interaction of water and sulfide minerals yields dissolved species which can be utilized to trace back the presence of sulfide minerals and associated minerals. Computer modeling and laboratory and field results show that the most characteristic dissolved species are hydrogen sulfide (H₂S, HS⁻), polysulfide ions (S_n²⁻) and thiosulfate (S₂O₃²⁻), derived from the hydrolysis of sulfide minerals. Typical concentration ranges are: 10⁻⁵ – 10⁻⁷ mole/l for hydrogen sulfide, 10⁻⁶ – 10⁻⁹ mole/l for polysulfides and 10⁻⁵ – 10⁻⁸ mole/l for thiosulfate. The chemical reactivity of these species at contact with air makes them difficult to assess unless determined immediately after sampling.These sulfur species can be determined rapidly and accurately in field conditions by simultaneous titration with mercuric chloride employing an Ag/Ag₂S electrode for the determination of the end points.The application to ore exploration is exemplified by the results of the research on roll-type uranium deposits in the southwest of France.     

Evolution of photoautotrophy and early atmospheric oxygen levels

Current photochemical models suggest that oxygen levels in the prebiological atmosphere were extremely low, most probably remaining in the range 10⁻⁸–10⁻¹⁴ PAL (present atmospheric level). It is, therefore, reasonable to assume that only life processes were able to overwhelm these minor O₂-pressures, with free oxygen resulting from the reduction of carbon dioxide to the carbohydrate level during photoautotrophic carbon fixation using water as an electron donor (

Full-size image (1K)

). It is by now well established that reduced (organic) carbon is a common constituent of sedimentary rocks from the very start of the geological record 3.8 Ga ago. Both direct assays and inferences derived from a carbon isotope mass balance suggest that the C_org-content of Archaean sediments was not basically different from that of geologically younger rocks. This poses the problem of the existence 3.5 Ga ago of an oxidation equivalent of such a formidable ancient C_org-reservoir which, depending on the model adopted for the growth of the sedimentary mass through time, might have amounted to between 20 and 100% of the present one. Low atmospheric oxygen pressures in the Early Precambrian that are inferred from retarded oxidation reactions, notably in the ancient continental weathering cycle, are likely, therefore, to indicate extremely rapid processes of oxygen consumption in other parts of the system (e.g., hydrosphere) rather than the general absence of photosynthetic oxidation equivalents during this time.     

Middle Pleistocene climate and habitat change at Zhoukoudian, China, from the carbon and oxygen isotopic record from herbivore tooth enamel

The Pleistocene deposits at Zhoukoudian, often referred to as the “Peking Man” site, contain dental remains from a diverse group of herbivores, including Equus sanmeniensis, Cervus elaphus, Cervus nippon, Megaloceros pachyosteus, Sus lydekkeri, and Dicerorhinus choukoutienensis. The carbon and oxygen isotopic compositions of structural carbonate within the enamel of these teeth are used to reconstruct the paleodiet and paleoenvironment of the mammals. The δ¹³C values of enamel from Zhoukoudian range from −2.3‰ to −13.0‰, indicating that these mammals consumed between 25% and 100% C₃ plants. The presence of significant amounts of C₄ plants in the diets of some herbivore species indicates that at the onset of the Middle Pleistocene local habitats included mixed C₃/C₄ vegetation. By approximately 470,000 yr ago, C₃ plants dominated the diets of herbivores studied, suggesting that the abundance of C₄ flora had decreased in the area. For all deer analyzed in this study, the values of δ¹³C and δ¹⁸O decrease substantially from about 720,000 to 470,000 yr ago. This trend may be due to a strengthening of the winter monsoon during the Middle Pleistocene.     

Origin of methane in high-arsenic groundwater of Taiwan – Evidence from stable isotope analyses and radiocarbon dating

Groundwaters in the confined aquifers of the Chianan and Ilan coastal plains of Taiwan are rich in dissolved methane (CH₄). Serious endemic “blackfoot disease”, which occurred in the Chianan plain, especially during AD1950-1970, has been demonstrated to have arisen from drinking highly reducing groundwater with abnormal arsenic and humic substance levels. In order to explore the origin of CH₄ and its hydrological implications, stable carbon isotope ratios (δ¹³C) and radiocarbon (¹⁴C) ages of exsolved CH₄, dissolved inorganic carbon (DIC), and sedimentary biogenic sediments from a total of 34 newly completed water wells at 16 sites were determined. The main results obtained are as follows: (1) The δ¹³C_CH4 (−65‰ to −75‰) values indicate that, except for one thermogenic sample (δ¹³C_CH4=38.2‰) from the Ilan plain, all CH₄ samples analyzed were produced via microbially mediated CO₂ reduction. Many δ¹³C_DIC values are considerably greater than −10‰ and even up to 10‰ due to Rayleigh enrichment during CO₂ reduction. (2) Almost all the ¹⁴C ages of CH₄ samples from the shallow aquifer (I) (<60 m depth) are greater than the ¹⁴C ages of coexisting DIC and sediments, suggesting the presence of CH₄ from underlying aquifers. (3) The ¹⁴C ages of coexisting CH₄, DIC and sediments from aquifer (II) of the Chianan plain are essentially equal, reflecting in-situ generation of CH₄ and DIC from decomposition of sedimentary organic matter and sluggishness of the groundwater flow. On the other hand, both CH₄ and DIC from each individual well of the relatively deep aquifers (III) and (IV) in the Chianan plain are remarkably younger than the deposition of their coexisting sediments, indicating that current groundwaters entered these two aquifers much later than the deposition of aquifer sediments. (4) Each CH₄ sample collected from the Ilan plain is older than coexisting DIC, which in turn is distinctly older than the deposition of respective aquifer sediments, demonstrating the presence of much older CO₂ and CH₄ from underlying strata.     

Using GC-MS/Combustion/IRMS to determine the C/C ratios of individual hydrocarbons produced from the combustion of biomass materials--application to biomass burning

Simultaneous mass spectral detection and stable carbon isotope analysis was performed on individual indigenous n-alkanes isolated from single C₄ and C³ plant species and on a series of aliphatic and polycyclic aromatic hydrocarbons (PAH) produced from the combustion of these same biomass materials. The analysis technique used a combined gas chromatograph-mass spectrometer/combustion/isotope ratio mass spectrometer (GC-MS/C/IRMS). Precision (2σ) for replicate measurements of individual compounds in standard solutions using this novel configuration ranged between 0.2 and 0.5‰ for n-alkanes and 0.3 and 0.8‰ for PAH. Accuracy of the n-alkane measurements ranged between 0.1 and 0.4‰ and that of the PAH measurements ranged between 0.2 and 0.9‰. Replicate GC-MS/C/IRMS measurements on the combustion-derived n-alkene/alkane pairs were performed to within a precision of between 0.1 and 1.1‰ and the precision for the combustion PAH was similar to the standard PAH solution. No notable isotopic effects were observed when altering the temperature of the combustion process from 900 to 700°C, or as a result of the individual n-alkenes/alkanes partitioning between the gaseous and condensate fractions. Combustion-derived n-alkenes/alkanes ranged from C₁₁ to C₃₁, and the C₄-derived n-alkenes/alkanes were approx. 8‰ more enriched in ¹³C than the C₃-derived compounds. Both the C₄ and C₃-derived n-alkenes/alkanes (C₂₀-C₃₀) were isotopically similar to the indigenous n-alkanes and were 2-3‰ more depleted in ¹³C than the lower mol. wt (C₁₁₁₁-C₁₉) n-alkenes/alkanes, suggesting an independent origin for the lower mol. wt compounds. Combustion-generated C₄ and C₃-derived 2-, 3-, and 4-ring PAH were also isotopically distinct (Δδ = 10‰). Unlike the n-alkenes/alkanes, no compound-to-compound variations were observed between the low and high mol. wt PAH. This study demonstrates that the isotopic composition of original plant biomass material is mainly preserved in the aliphatic hydrocarbons and PAH generated by its combustion. Consequently, analyses of these compounds in sediments impacted by fire occurrences may provide useful information about paleo-fire activity that may help elucidate the impact biomass burning may have had and could have on climate-biosphere interactions.     

Origin and formation pathways of kerogen-like organic matter in recent sediments off the Danube delta (northwestern Black Sea)

The chemical structure, source(s), and formation pathway(s) of kerogen-like organic matter (KL) were investigated in recent sediments from the northwestern Black Sea, off the Danube delta. Three sections from a sediment core collected at the mouth of the Sulina branch of the delta, under an oxic water column, were examined: S₀ (0–0.5 cm bsf), S₁₀ (10–13 cm bsf), and S₂₀ (20–25 cm bsf). The bulk geochemical features of these sediments (total organic carbon, organic C/N atomic ratio, δ¹³C_org) were determined. Thereafter, KL was isolated from the samples, as the insoluble residue obtained after HF/HCl treatment. KL chemical composition was investigated via spectroscopic (FTIR, solid state ¹³C and ¹⁵N NMR) and pyrolytic (Curie point pyrolysis–gas chromatography–mass spectrometry) methods, and the morphological features were examined by scanning and transmission electron microscopy. Similar morphological features and chemical composition were observed for the three KLs and they suggested that the selective preservation of land-plant derived material as well as of resistant aliphatic biomacromolecules (probably derived from cell walls of freshwater microalgae) was the main process involved in KL formation. Besides, some melanoidin-type macromolecules (formed via the degradation-recondensation of products mainly derived from proteinaceous material) and/or some encapsulated proteins also contributed to the KL chemical structure.     

The Aguablanca Cu–Ni ore deposit (Extremadura, Spain), a case of synorogenic orthomagmatic mineralization: age and isotope composition of magmas (Sr, Nd) and ore (S)

The Aguablanca Cu–Ni orthomagmatic ore deposit is hosted by mafic and ultramafic rocks of the Aguablanca stock, which is part of the larger, high-K calc-alkaline Santa Olalla plutonic complex. This intrusive complex, ca. 338 Ma in age, is located in the Ossa-Morena Zone (OMZ) of the Iberian Variscan Belt. Mineralization consists mainly of pyrrhotite, pentlandite and chalcopyrite resulting from the crystallization of an immiscible sulphide-rich liquid. Isotope work on the host igneous rocks (Sr, Nd) and the ore (S) suggests that contamination with an upper-crustal component took place at some depth before final emplacement of the plutons (Nd₃₃₈=−6 to −7.5; Sr₍₃₃₈₎=0.7082 to 0.7100; δ³⁴S_(sulphides) near +7.4‰). Assimilation–fractional crystallization (AFC) processes are invoked to explain early cumulates and immiscible sulphide-magma formation. Intrusion took place at the beginning of the type-A oblique subduction of the South Portuguese Zone under the Ossa-Morena Zone and was probably driven by transpressive structures (strike-slip faults). The mineralization is thus synorogenic.Aguablanca is probably the first case referred to in the literature of a magmatic Cu–Ni ore deposit hosted by calc-alkaline igneous rocks.