桩-网复合地基承载及变形特性的有限元分析

采用ABAQUS有限元软件,通过有限元数值模拟的方法分析了路堤荷载作用下桩-网复合地基中土工合成材料刚度、垫层厚度、桩体模量以及桩间距对复合地基的荷载传递特性、桩-土应力比、路基的表面沉降及侧向位移的影响。总结、分析计算结果,获得了桩-网复合地基承载及变形的一些基本特性,如：增加土工合成材料刚度,可显著地减小桩-土差异沉降和路基侧向位移,并增加桩-土应力比;增加垫层厚度,可明地改善桩-土荷载分担比和桩-土应力比等力学性状。这些结果对桩-网复合地基的设计与施工具有一定的指导意义。     

能源桩与周围土体之间荷载传递模型的改进及其桩身承载特性研究

桩-土相互作用问题是岩土工程桩基础问题的关键点与难点,目前针对桩身在循环温度荷载与上覆结构荷载双重作用下的能源桩承载特性研究较少。在传统理想弹塑性模型及双曲线模型的基础上,采用分段非线性的方法对桩-土荷载传递骨干曲线进行了修正,并基于Masing’s循环准则,提出了适用于能源桩的桩-土荷载传递模型。利用改进的桩-土荷载传递模型对能源桩承载特性进行数值分析,着重研究了桩-土荷载传递参数比R对能源桩受力情况的影响。此外,为了探究在上覆结构荷载及循环温度荷载双重作用下,能源桩与周围土体之间的真实荷载传递关系及其结构热力学特性,开展了针对能源桩与周围土体之间相互作用问题的室内模型试验,监测了其桩身轴向应力及侧摩阻力随温度及深度变化的趋势,并与基于改进荷载传递模型的数值计算结果进行了对比。室内模型试验监测及数值计算结果显示：能源桩在上覆结构荷载及温度循环荷载双重作用下,其受力行为受改进的桩-土荷载传递循环曲线控制;基于改进的桩-土荷载传递循环曲线而建立的数值模型计算结果与试验结果基本吻合,改进的桩-土荷载传递模型能够较好发地反映能源桩实际的承载特性。     

水平荷载下导管架平台桩基础的非线性有限元分析

导管架平台桩基础的控制荷载主要为风荷载、波浪荷载、地震荷载等水平荷载,为研究水平荷载下导管架平台桩基础的承载特性,采用非线性有限元分析方法对水平荷载下桩-土之间的相互作用进行研究,提出了有效模拟桩基水平承载特性的有限元模型,分析了模型桩的刚度、直径、土质参数中水平土压力系数、剪胀角对桩基承载特性的影响及水平荷载下群桩承载特性,并将有限元计算结果与API规范及模型试验结果进行对比。研究结果表明,非线性有限元分析方法分析水平荷载下桩-土相互作用是可行的,计算结果可为导管架平台的桩基设计提供参考。     

用有限单元法分析超长单桩的荷载传递

用描述桩侧摩阻力与桩-土相对位移关系的指数函数,推导出桩-土接触面本构模型,并设置了Goodman接触面单元来分析桩土相互作用。针对超长桩钢筋混凝土受应力大的特点,用混凝土的弹性非线性模型来分析受轴向荷载下钢筋混凝土的应力应变关系。编制的有限元程序能解决层状土及层状土导致沿桩身不同位置处桩-土相互作用不同特性,并针对工程实例桩变截面的特点,采用合理的计算手段使得按等截面桩计算分析结果与按实际变截面桩计算分析结果相同。用此程序对一工程实例进行了计算分析,计算结果与静载试验实测值较符合。     

基于P-Y曲线法的水平受荷桩非线性有限元分析

P-Y曲线法是一种非线性地基反力法,它考虑了土的非线性特性、分层特性、不同土类及荷载类型等因素,适用于分析横向荷载作用下有较大变位的桩结构物。从Newmark方法弹簧支座的概念出发,建立了桩土相互作用体系的接触非线性有限元分析模型,采用复合地基反力法的P-Y曲线公式,推导了作用于桩上的非线性弹簧弹性系数的计算公式,基于marc有限元软件编制了相应的计算程序,基于一阶Taylor随机有限元的思想,给出了土性参数对泥面位移的敏感性计算公式,结合试桩资料的计算结果验证提出方法是合理可行的。     

深基坑内撑式支护结构计算的综合刚度和双参数法

将吴恒立提出的用于合理计算桩顶作用水平集中荷载的推力桩的综合刚度原理和双参数法,延伸应用于作用有水平分布荷载（土压力）的深基坑围护结构上,提出其杆系有限元数值解法,对一深基坑内支撑式支护结构实例的开挖和支护过程中的各个工况进行了数值模拟分析,由实测位移试算反分析得到了合理的墙-土的综合刚度和地基土抗力双参数,与现有方法计算结果对比表明,该方法能使所得结果更接近实测值。从而说明,综合刚度原理和双参数法的杆系有限元数值解能更为可靠的计算深基坑内支撑式支护结构,具有参考应用价值。     

基于相互作用系数探讨的群桩简化分析

相互作用系数法是群桩分析的一种有效的数值计算方法,该方法关键在于确定群桩的相互作用系数。传统的弹性分析方法所得的相互作用系数值偏大,计算结果与实测值差距不小;采用考虑土体弹塑性特征和桩土界面接触的三维有限元方法计算相互作用系数可以有效减少弹性方法的计算偏差,在此基础上推导了高承台群桩的简化分析方法。根据ABAQUS平台进行了大量三维有限元计算,分析了荷载水平、桩土模量比、桩距径比和桩长桩径比对相互作用系数的影响;比较了不同方法下相互作用系数的变化规律。通过有限元方法确定的相互作用系数对两群桩工程实例进行分析,计算结果表明该方法最接近于实测结果。     

国华通辽风电场三期工程梁板式桩筏基础性状数值分析

风力发电作为发展最快的新型能源之一,得到越来越多的关注,耦合荷载作用下风机基础的优化设计成为一个重要的问题。首先对商业有限元的计算精度以及对耦合荷载的模拟能力进行验证,在该基础上对国华通辽风电场梁板式桩筏基础进行模拟分析,重点讨论在耦合荷载作用下梁板式基础管桩、肋梁和环梁的受力和变形特性,并将有限元计算得出的基础构件内力与规范设计方法计算结果进行对比分析。与此同时,分析风机基础桩土分担比,研究耦合荷载作用下土体的承载作用。计算结果可为实际工程的设计提供参考依据。     

倾斜荷载下群桩承载特性理论分析

倾斜荷载是海洋、输变线塔等桩基工程的最主要荷载形式之一。然而现行规范中有关该问题的计算方法相对并不成熟。将桩身划分为自由段和嵌固段,建立桩基单元体的挠曲微分方程;基于群桩p-y曲线法计算水平荷载下群桩承载特性;考虑桩-土相对滑移和竖向力引起的二阶弯矩(P-(35))效应,基于剪切位移法计算竖向荷载下桩-土相互作用;编制相应程序,以迭代法计算获得荷载-位移曲线、桩身弯矩分布规律曲线等。分析验证了所建立的理论计算方法的准确性和可靠性。相关研究成果拓展了工程设计中倾斜荷载作用下桩基承载特性计算方法,为工程设计与计算提供参考依据。     

多向荷载作用下层状地基刚性桩筏基础分析

提出一种多向荷载作用下层状地基中刚性桩筏基础的计算方法。基于剪切位移法,采用传递矩阵形式分析了竖向荷载下桩顶面-桩顶面相互作用;引入修正桩侧地基模量,采用有限差分法分析了水平荷载下桩顶面-桩顶面相互作用;基于层状弹性半空间理论,分析了多向荷载下桩顶面-土表面、土表面-桩顶面、土表面-土表面的相互作用关系。建立了桩土体系柔度矩阵,得到了多向荷载下层状地基中刚性桩筏基础的受力和变形的关系以及桩的内力和变形沿桩身分布规律。通过与有限元对比,验证了该方法的合理性和修正地基模量的优越性,并对多向荷载作用下的桩筏基础进行了计算分析,计算结果表明,水平力将会引起桩筏基础的倾斜。     

Experimental research on horizontal bearing behavior of caisson-pile composite foundationEI北大核心CSCD

In this study, four groups of different types of bridge foundation model are tested to research the horizontal bearing behavior of caisson-pile composite foundation in lab based on the Qiongzhou Strait bridge project. The Q-s curve and horizontal ultimate bearing capacity of these four groups of foundations in sandy soil layer are obtained. Pile bending moment and shear force of pile shaft are analyzed in detail. At the same time, the load sharing ratio of caisson and piles is discussed. The results show that the horizontal ultimate bearing capacities of a single caisson foundation are increased by 1.2 times, 1.6 times and 2 times respectively with adding skirts, steel pipe pile, or steel pipe pile and the skirt. The maximum bending moment point is in the middle of the pile shaft, i.e. at about 0.5 m under the mud surface. The horizontal load is borne mainly by the upper caisson foundation and soil layers above the middle upper part of pile. The maximum shear force is found at the joint of pile top of steel pipe and caisson pile, where the reinforcement measures should be taken in practical engineering. The research achievements could provide a better reference for design or construction of caisson-pile composite foundation.     

带桩沉箱复合基础水平向承载性状模型试验研究

以琼州海峡跨海大桥工程为背景,通过4组不同型式深水桥梁基础模型试验,对新型带桩沉箱复合基础的水平向承载性能进行了初步研究。试验得到了4组模型在砂性土层中的Q-s曲线及水平向极限承载力,并对复合基础在各级水平荷载下的桩身弯矩和剪力进行了详细分析,同时对沉箱-桩荷载分担比展开了讨论。试验结果表明：当增加裙边、钢管桩、或同时增加钢管桩和裙边后能够使单体沉箱基础的水平向极限承载力分别提高1.2倍、1.6倍和2.0倍;桩身最大弯矩点均出现在桩身中部即泥面下约0.5 m处。水平荷载主要由上部沉箱基础及桩身中上部土体承担,钢管桩桩顶与沉箱连接部位出现最大剪力,在实际工程中应在此处采取加固措施。研究成果可为这一新型深水桥梁基础的推广应用提供诸多有益参考。     

Analysis of rectangular piles subjected to lateral loads in nonhomogeneous soil using a Winkler model approach

An analytical approach using a Winkler model based on two lateral soil displacement components in a three‐dimensional soil is investigated to provide analytical solutions of horizontal response of a rectangular pile subjected to lateral loads in nonhomogeneous soil. The two lateral displacement components of a soil surrounding the rectangular pile are represented by the Fourier series of displacement potential functions in the elastic three‐dimensional analysis. The lateral stiffness coefficient of the rectangular pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient taking into account rocking rotation of a rigid pile shaft. The relationship between horizontal displacement, rotation, moment, and shear force for the rectangular pile subjected to horizontal loads in nonhomogeneous soil is obtainable in the form of the recurrence equation. The formulation of lateral displacement and rotation for a rectangular pile subjected to lateral loads on the pile base in nonhomogeneous soil is proposed by taking into account Mindlin's equation and the equivalent thickness for soil layers in the equivalent elastic method. The difference of lateral behavior between square and circular piles subjected to lateral loads is insignificant. The effect of aspect ratio of the rectangular pile on the lateral behavior is great for the lower stiffness ratio between pile and soil and the larger length–equivalent diameter ratio. The effect of the value of Poisson's ratio of soil on lateral stiffness coefficient is relatively small except Poisson's ratio close to 0.5. The comparison of the results calculated by the current method for a rectangular pile subjected to lateral loads in nonhomogeneous soil has shown good agreement with those obtained from the analytical methods and the finite element method. Copyright © 2015 John Wiley & Sons, Ltd.     

软土中已打入桩对土体位移的遮帘作用研究

采用侧向移动土中桩的理论分析结果以及有限元数值模拟,较为系统地分析了沉桩工程中已打入桩对土体侧向位移及地表隆起的遮帘作用,结果表明已打入桩对土体侧向位移的总体遮帘作用并不显著。采用不同切向劲度系数的接触面单元以模拟已打入桩间隔时间长短对地表隆起的遮帘效应,结果表明：打入桩间隔期较短时,已打入桩对地表隆起的遮拦作用主要体现在对土体位移的“水平阻隔”上,土体沿桩土界面发生流动向上隆起;而间隔期较长时,桩土间存在有较大的摩阻力而限制了土体的位移,此时已打入桩对地表隆起的遮拦作用体现在竖向摩阻力对土体隆起的“抑制”上。     

A three‐dimensional displacement approach for analysis of laterally loaded piles in nonhomogeneous soil

An analytical approach using the three‐dimensional displacement of a soil is investigated to provide analytical solutions of the horizontal response of a circular pile subjected to lateral loads in nonhomogeneous soil. The rocking stiffness coefficient of the pile shaft in homogeneous soil is derived from the analytical solution taking into account the three‐dimensional displacement represented in terms of scalar potentials in the elastic three‐dimensional analysis. The lateral stiffness coefficient of the pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient taking into account the rocking rotation of a rigid pile shaft. The relationship between horizontal displacement, rotation, moment, and shear force of a pile subjected to horizontal loads in nonhomogeneous soil is obtainable in the form of the recurrence equation. The formulation of the lateral displacement and rotation of the pile base subjected to lateral loads in nonhomogeneous soils is presented by taking into account Mindlin's equation and the equivalent thickness for soil layers in the equivalent elastic method. There is little difference between lateral, rocking, and couple stiffness coefficients each obtained from both the two‐dimensional and three‐dimensional methods except for the case of Poisson's ratio near 0.5. The comparison of results calculated by the current method for a pile subjected to lateral loads in homogeneous and nonhomogeneous soils has shown good agreement with those obtained from analytical and numerical methods. Copyright © 2017 John Wiley & Sons, Ltd.     

能量桩群桩工作特性简化分析方法研究

采用双曲线模型模拟桩土界面上的力学行为,利用剪切位移法反映剪应力在土层中的传递,考虑群桩之间的相互作用,建立了热?力耦合作用下能量桩群桩基础工作特性的简化分析方法。该方法能反映桩土界面上的非线性、桩顶的约束条件和能量桩位置的影响,可直接计算所有桩的位移和轴力。与现有方法相比,计算得到的双桩相互作用因子更加合理。通过与文献中试验数据的对比表明,若只有局部桩经历温度变化,能量桩运行过程中各桩之间存在差异变形,基础出现倾斜,桩顶荷载发生重分布。所建立方法计算方便,能合理模拟能量桩群桩基础的主要工作特性,可用于大规模能量桩群桩基础的设计计算。     

桩-土间剪切应力的传递探讨

对不同情况下桩-土间剪切应力进行了初步的理论分析,并基于ADINA有限元程序,对不同情况下的桩-土间剪切应力进行了计算对比分析。结果表明,同种土体和桩体条件下,各种模式达到极限状态时桩-土间剪切应力不同,堆载作用下负摩擦力值最大,抗拔桩负摩阻力值最小,桩顶受压桩、托桩的摩阻力值介于其间;桩材泊松比在0.15～0.35范围内时,桩侧摩阻力随泊松比的增大而增大。所得结论有助于进一步认识桩-土相互作用规律以及桩-土荷载传递机制。     

静压沉桩引起邻近隧道水平位移计算方法研究

静压沉桩过程中会产生强烈的挤土效应,使得桩周土及邻近的地下电缆隧道产生扰动变形,如果变形过大,可能破坏隧道的防水结构,造成隧道渗漏水,严重影响隧道的正常使用及安全。在圆柱孔扩张理论及基床系数法的基础上,研究了饱和软土地区静压沉桩作用下周边地层及邻近既有电缆隧道应力及水平位移的理论计算方法;考虑群桩效应,推导了单排群桩施工造成邻近既有电缆隧道水平位移的理论计算方法,并研究了群桩效应影响系数的取值范围;最后,开展了实际工程的理论计算和数值模拟。研究结果表明：提出的方法可方便计算出单桩及单排群桩施工造成的邻近既有电缆隧道的水平位移,计算结果与数值模拟结果吻合性良好。研究可为有邻近桩基施工时电缆隧道的扰动预测及保护提供参考。     

纵横向受荷基桩变形内力的矩阵传递解

针对地基的土体屈服性状,将桩侧土体分为弹性变形区域与塑性变形区域两种情况。假定地基反力系数为3参数的一般形式,同时考虑桩身 效应并计入桩身自重、桩侧摩阻力的影响,根据地基反力法分别建立桩身弹性段和塑性段挠曲线微分方程。在解微分方程的过程中,采用矩阵传递法结合Laplace正逆变换的方法解得桩顶作用轴向力、水平力、弯矩时桩身内力和变形的矩阵传递解,并用Fortran语言编制了相应计算程序。最后将试验数据对上述方法进行验证,结果表明计算值与模型试验的实测值吻合很好,采用文中3参数地基反力法反算所得的地基参数离散性很小,研究结果具有较高的应用价值。     

Application of a continuum numerical model for pile driving analysis and comparison with a real case

This paper presents the results of a so-called continuum numerical model for wave propagation analysis and soil-pile dynamic response during pile driving. An axisymmetric finite difference numerical model is developed having solid elements for both pile structure and the soil media surrounding and below the pile. Interface elements are used between the pile shaft and the soil to facilitate the sliding between the two media. The performance of the developed model is verified in two stages. First, a simple rod is subjected to a half sine-wave force function at the rod head and the corresponding reflections of force and velocity (multiplied by impedance) are presented for different boundary conditions at the rod tip. The model is then used for signal matching analysis of a real driven pile for which complete information of soil layering, dynamic test signals, and static load test results are available. The signal matching analysis was performed successfully and comparison between several other predicted and measured parameters proved the reasonably good performance of the developed continuum model.