Depositional development of the Muskeg Lake crevasse splay in the Cumberland Marshes (Canada)

Crevasse splays are common geomorphological features in alluvial and deltaic floodplains. Although crevasse splays can develop into full avulsions, thereby transforming large areas of floodbasins, little is known about their sedimentary and geomorphological development at the decadal scale and their avulsion potential. We used aerial photography and lithological cross‐sections to reconstruct crevasse‐splay formation in the largely unmanaged floodplain of the Saskatchewan River in the Cumberland Marshes (Saskatchewan, Canada). Based on surface geomorphology and subsurface deposits, various stages of crevasse‐splay development were described which were linked to both external forcing and internal morphodynamics. Initial splay deposition, following a levee breach during a large flood, occurred as a broad but relatively thin sandy sheet in a down‐basin direction in the receiving backswamp area. In a next phase, these primary crevasse‐splay deposits blocked local down‐basin flow, thereby forcing the crevasse‐splay channel in a direction perpendicular to the parent channel and original floodbasin gradient. This created an asymmetrical splay sequence composition, which differs in appearance from more commonly observed dendritic crevasse splays. It is concluded that sedimentation patterns in the splay have been influenced by inherited effects of previously formed deposits. Feedbacks of the original floodbasin gradient and earlier stages of splay formation are suggested as prominent mechanisms in creating the current morphology, orientation, and architecture of its deposits. Copyright © 2015 John Wiley & Sons, Ltd.     

Evaluating competing hypotheses for the origin and dynamics of river anastomosis

Anastomosing rivers have multiple interconnected channels that enclose flood basins. Various theories potentially explain this pattern, including an increased discharge conveyance and sediment transport capacity of multiple channels, deltaic branching, avulsion forced by base‐level rise, or a tendency to avulse due to upstream sediment overloading. The former two imply a stable anabranching channel pattern, whereas the latter two imply disequilibrium and evolution towards a single‐channel pattern in the absence of avulsion. Our objective is to test these hypotheses on morphodynamic scenario modelling and data of a well‐documented case study: the upper Columbia River. Proportions of channel and floodplain sediments along the river valley were derived from surface mapping. Initial and boundary conditions for the modelling were derived from field data. A 1D network model was built based on gradually varied flow equations, sediment transport prediction, mass conservation, transverse slope and spiral meander flow effects at the bifurcations. The number of channels and crevasse splays decreases in a downstream direction. Also, measured sediment transport is higher at the upstream boundary than downstream. These observations concur with bed sediment overloading from upstream, which can have caused channel aggradation above the surrounding floodplain and subsequent avulsion. The modelling also indicates that avulsion was likely caused by upstream overloading. In the model, multi‐channel systems inevitably evolve towards single‐channel systems within centuries. The reasons are that symmetric channel bifurcations are inherently unstable, while confluenced channels have relatively less friction than two parallel channels, so that more discharge is conveyed through the path with more confluences and less friction. Furthermore, the present longitudinal profile curvature of the valley could only be reproduced in the model by temporary overfeeding. We conclude that this anastomosing pattern is the result of time‐varying sediment overloading and is not an equilibrium pattern feature, and suggest this is valid for many anastomosing rivers. Copyright © 2012 John Wiley & Sons, Ltd.     

Cascades of sub-decadal,channel-floodplain changes in low-gradient,non-vegetated reaches near a dryland river terminus: Salar de Uyuni,Bolivia

The terminus of the ephemeral Río Colorado is located at the margins of Salar de Uyuni, Bolivia, the world's largest salt lake. The low-gradient (<0.0006 m m^-1), non-vegetated reaches approaching the terminus provide an excellent natural laboratory for investigating cascades of channel-floodplain changes that occur in response to quasi-regular flows (at least once annually) and fine-grained sediment supply (dominantly silt and clay). High-resolution satellite imagery (<0.65 m, various dates from 2004 onwards) and field data reveal widespread, pronounced and rapid morphodynamics on sub-decadal timescales, including channel erosion and chute cutoff formation, and development of crevasse channels and splays, floodouts (unchannelled surfaces at channel termini), and erosion cells (floodplain scour-transport-fill features). In particular, following high annual precipitation (>400 mm) in 2004–2005 and two subsequent high magnitude daily precipitation events (~40 mm), all of which led to widespread flooding, numerous crevasse splays formed between 2004 and 2016, avulsions occurred at nearby floodouts, and erosion cells downstream of the splays and floodouts underwent striking morphological changes. High-precision GPS data reveal two preferential localities for erosion cell development: partially or fully abandoned channels with crevasse splay remnants, and topographic lows between channels. In this overall low-gradient setting, comparatively high gradients (up to ~0.0006 m m^-1) at the edge of splay deposits and topography created by crevasses and abandoned channels may initiate knickpoint retreat and thereafter erosion cell development. Abandoned channels with splays tend to give rise to narrow, deep erosion cells, while topographic lows promote relatively shallow, wide erosion cells. In both situations, erosion cells may extend upslope and downslope, and eventually connect to form straight channels. The channel-floodplain morphodynamics near the Río Colorado terminus extend previous analyses of low-gradient, dryland river systems, particularly because the lack of vegetation and quasi-regular floods drive cascades of rapid changes on sub-decadal timescales. © 2018 John Wiley & Sons, Ltd.     

Variation in reach‐scale thalweg‐migration intensity in a braided reach of the lower Yellow River in 1986–2015

Thalweg migration of an alluvial river plays a key role in channel evolution, which may influence the effect of existing river training works and biodiversity on floodplains, and cause losses in riparian land and property. The braided reach of the Lower Yellow River underwent continuous channel aggradation during the period from 1986 to 1999, and then remarkable channel degradation in 1999–2015 owing to the state of operation of the Xiaolangdi Reservoir in 1999. Here we quantify associated thalweg migration changes and identify the key influencing factor in the braided reach. Thalweg‐migration distances and intensities at section‐ and reach‐scales were calculated during the past 30 years from 1986 to 2015, in order to investigate the characteristics of thalweg migration in the reach. There was a 47% reduction in the reach‐scale thalweg‐migration distance and a 35% reduction in the corresponding migration intensity after the reservoir operation. It is also revealed that fluvial erosion intensity is a dominant factor in controlling the thalweg migration, based on the investigation into various influencing factors in the study reach. The thalweg‐migration intensity of the braided reach can be expressed as a power function of the previous four‐year average fluvial erosion intensity. The calculated thalweg‐migration intensities in 1986–2015 using the proposed relation generally agree with the observed data. Copyright © 2017 John Wiley & Sons, Ltd.     

Trace metals distribution pattern in floodplain sediments of a lowland river in relation to contemporary valley bottom morphodynamics

The distribution of trace metals in alluvial sediments depends on their natural background concentrations, and on the dynamics of contemporary depositional and erosional (mainly flood‐induced) processes. Geological and geochemical investigations were carried out in the valley of Vistula River near Magnuszew (central Poland). Sediment samples were collected from a depth of 35 cm and comprise sediments of all defined geomorphological features. Identification and geological interpretation of the morphodynamic sediment features was supported by aerial photographs and high‐resolution satellite images. These studies revealed that the distribution of trace metals is closely linked to the morphogenesis of the alluvial floodplain. The highest concentrations of Cu, Co, Zn, V, Cr and Ni were observed in crevasse‐splays deposits. By contrast, Sr, Pb and As were concentrated in deposits which fill oxbow lakes (partly infilled with organic deposits). The lowest concentrations of trace metals were detected in flood sediments deposited within erosional troughs. The geomorphological and sedimentological history of the fluvial features explains the pattern of heavy metal distribution on the current floodplain surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Upstream and downstream controls of recent avulsions on the Taquari megafan,Pantanal, south‐western Brazil

Avulsion, the natural relocation of a river, is a key process in the evolution of subaerial fans, river floodplains and deltas. The causes of avulsion are poorly understood, which is partly due to the scarcity of field studies of present avulsions. At present, two avulsions are occurring on the middle and lower Taquari megafan, Pantanal basin, south‐western Brazil. Here we present an analysis of the causes of these avulsions based on field and remote sensing data and show that avulsions on megafans can be controlled by both upstream and downstream processes. The middle fan avulsion (started in 1997–1998) is a result of upstream control: overbank aggradation was caused by the (variable) input of sandy sediment into the system, which caused channel‐belt superelevation and also created an easily erodible subsurface favouring bank retreat, crevassing, and scour of deep floodplain channels. The sandy subsurface in this area is inferred to have been a major factor in the causation of this avulsion under conditions of little gradient advantage. The lower fan avulsion (started c. 1990) results from interplay of upstream and downstream controls, the latter being related to the local base level (the Paraguay River floodplain) at the toe of the fan. Channel and overbank aggradation on the lower fan was influenced by fan sub‐lobe progradation and channel backfilling. Fan sub‐lobe progradation caused a significant gradient advantage of the avulsion channel over the parent channel. Avulsions are commonly supposed to be preferentially triggered by high‐magnitude floods, when there is considerable channel‐belt superelevation. However, both avulsions studied by us were triggered by small to average floods, with modest channel‐belt superelevation. We conclude that flood magnitude and channel‐belt superelevation have been overrated as causes of avulsion, and demonstrate additional causes that influence the growth of crevasses into avulsions. Copyright © 2012 John Wiley & Sons, Ltd.     

Geological controls on the formation of alluvial meanders and floodplain wetlands: the example of the Klip River,eastern Free State,South Africa

Floodplain wetlands are common features of rivers in southern Africa, but they have been little studied from a geological or geomorphological perspective. Study of the upper Klip River, eastern Free State, South Africa, indicates strong geological controls on the formation of alluvial meanders and associated floodplain wetlands. Along this river, pronounced and abrupt changes in valley width are strongly linked to lithological variations. Where weakly cemented sandstone crops out, the Klip has laterally eroded bedrock and carved valleys up to 1500 m wide. In these valleys, the river meanders (sinuosity up to ～1·75) on moderate gradients (<0·001) within extensive floodplains marked by numerous oxbow lakes, backswamps and abandoned channels, many of which host substantial wetlands. In contrast, where highly resistant dolerite crops out, lateral erosion of bedrock is restricted, with the Klip tending instead to erode vertically along joints or fractures. Here, valleys are narrower (<200 m), channel‐bed gradients are steeper (>0·003), the river follows a much straighter course (sinuosity ～1·10–1·34), and floodplains are restricted in width. Long‐term landscape development in the Klip and numerous similar catchments depends on the interaction between fluvial processes in the sandstone and dolerite valleys. In the sandstone valleys, vertical erosion rates are controlled by erosion rates of the more resistant dolerites downstream. Hence, in the short‐ to medium‐term (decades to tens of thousands of years), lateral erosion dominates over vertical erosion, with the river concomitantly planing sandstone in the channel floor and reworking floodplain sediments. The thickness of alluvial fill in the sandstone valleys is limited (<4 m), but the resultant meanders are naturally dynamic, with processes such as point bar deposition, cutoff formation and channel avulsion resulting in an assemblage of fluvial landforms. In the longer term (greater than tens of thousands of years), however, vertical erosion will occur in the sandstone valleys as the downstream dolerites are lowered by erosion, resulting in channel incision, floodplain abandonment, and desiccation of the wetlands. Identification of the geological controls on meander and wetland formation provides information vital for the design of effective management guidelines for these ecologically rich habitats, and also contributes to a better understanding of rivers that are intermediate between fully alluvial and fully bedrock. Copyright © 2002 John Wiley & Sons, Ltd.     

Channel incision,evolution and potential recovery in the Walla Walla and Tucannon River basins,northwestern USA

We evaluated controls on locations of channel incision, variation in channel evolution pathways and the time required to reconnect incised channels to their historical floodplains in the Walla Walla and Tucannon River basins, northwestern USA. Controls on incision locations are hierarchically nested. A first‐order geological control defines locations of channels prone to incision, and a second‐order control determines which of these channels are incised. Channels prone to incision are reaches with silt‐dominated valley fills, which have sediment source areas dominated by loess deposits and channel slopes less than 0·1(area)^?0·45. Among channels prone to incision, channels below a second slope–area threshold (slope = 0·15(area)^?0·8) did not incise. Once incised, channels follow two different evolution models. Small, deeply incised channels follow Model I, which is characterized by the absence of a significant widening phase following incision. Widening is limited by accumulation of bank failure deposits at the base of banks, which reduces lateral channel migration. Larger channels follow Model II, in which widening is followed by development of an inset floodplain and aggradation. In contrast to patterns observed elsewhere, we found the widest incised channels upstream of narrower reaches, which reflects a downstream decrease in bed load supply. Based on literature values of floodplain aggradation rates, we estimate recovery times for incised channels (the time required to reconnect to the historical floodplain) between 60 and 275 years. Restoration actions such as allowing modest beaver recolonization can decrease recovery time by 17–33 per cent. Published in 2007 by John Wiley & Sons, Ltd.     

Epigenetic gorges in fluvial landscapes

Epigenetic gorges form when channels that have been laterally displaced during episodes of river blockage or aggradation incise down into bedrock spurs or side‐walls of the former valley rather than excavating unconsolidated fills and reinhabiting the buried paleovalley. Valley‐filling events that promote epigenetic gorges can be localized, such as a landslide dam or an alluvial/debris flow fan deposit at a tributary junction, or widespread, such as fluvial aggradation in response to climate change or fluctuating base‐level. The formation of epigenetic gorges depends upon the competition between the resistance to transport, strength and roughness of valley‐filling sediments and a river's ability to sculpt and incise bedrock. The former affects the location and lateral mobility of a channel incising into valley‐filling deposits; the latter determines rates of bedrock incision should the path of the incising channel intersect with bedrock that is not the paleovalley bottom. Epigenetic gorge incision, by definition, post‐dates the incision that originally cut the valley. Strath terraces and sculpted bedrock walls that form in relation to epigenetic gorges should not be used to directly infer river incision induced by tectonic activity or climate variability. Rather, they are indicative of the variability of short‐term bedrock river incision and autogenic dynamics of actively incising fluvial landscapes. The rate of bedrock incision associated with an epigenetic gorge can be very high (>1 cm/yr), typically orders of magnitude higher than both short‐ and long‐term landscape denudation rates. In the context of bedrock river incision and landscape evolution, epigenetic gorges force rivers to incise more bedrock, slowing long‐term incision and delaying the adjustment of rivers to regional tectonic and climatic forcing. Copyright © 2008 John Wiley & Sons, Ltd.     

Late Quaternary biotic and abiotic controls on long-term sediment flux in a northern Australian tropical river system

The modern distribution of monsoonal rainforest in the Australian tropics is patchy and is mainly associated with river corridors and groundwater springs, which indicates a strong dependence on hydrologic and geomorphic conditions. While their present distribution is well known, very little data exists on past spatial and temporal dynamics of these ecosystems, or their medium- to longer-term controls. Factors such as (i) fire frequency and type, and/or (ii) hydroclimatic conditions (e.g. droughts) have been proposed to control riverine corridor rainforest extent. Recent observations, however, also suggest an additional (iii) geomorphic control induced by alluvial knickpoint migration. Sediment sequences provide valuable archives for the reconstruction of longer-term (a) floodplain sedimentary dynamics, (b) local vegetation history, and (c) catchment-wide fire histories. This study investigates such a sediment sequence at Wangi Creek, and shows that a phase of aggradation, lasting ~4000 years, was recently disrupted by channel incision and floodplain erosion. The aggradational phase is characterized by sand deposition with average vertical floodplain accretion rates of 0.8 cm/yr and includes phases of soil development. The recent incisional phase has changed hydro-geomorphic conditions and caused widespread degradation of vegetation, erosion and lowering of the macro-channel surface. While there is no evidence in our data for an erosional event of similar magnitude since the onset of late Holocene floodplain aggradation, Wangi Creek experienced significant erosion and incision immediately before ~4000 years, providing the first evidence for a tropical cut-and-fill river system. We hence argue that phases of aggradation mainly controlled by biotic processes alternate and depend on feedbacks with incision phases controlled mainly by abiotic processes. The results show that eco-hydro-geomorphic feedbacks may play a crucial role in the medium- to longer-term history of tropical fluvial systems and need to be considered when interpreting fluvial archives with regards to climate, fire or human induced change. © 2019 John Wiley & Sons, Ltd.     

The formation of an anabranching planform in a sandy floodplain by increased flows and sediment load

Anabranching rivers evolve in various geomorphic settings and various river planforms are present within these multi‐channel systems. In some cases, anabranches develop meandering patterns. Such river courses existed in Europe prior to intensive hydro‐technical works carried out during the last 250 years. Proglacial stream valleys, inherited from the last glaciation, provided a suitable environment for the development of anabranching rivers (wide valleys floors with abundant sand deposits). The main objective of the present study is to reconstruct the formation of an anabranching river planform characterized by meandering anabranches. Based on geophysical and geological data obtained from field research and a reconstruction of palaeodischarges, a model of the evolution of an anabranching river formed in a sandy floodplain is proposed. It is demonstrated that such a river system evolves from a meandering to an anabranching planform in periods of high flows that contribute to the formation of crevasse splays. The splay channels evolve then into new meandering flow paths that form ‘second‐order’ crevasses, avulsions and cutoffs. The efficiency of the flow is maintained by the formation of cutoffs and avulsions preventing the development of high sinuosity channels, and redirecting the flow to newly formed channels during maximum flow events. A comparison with other anabranching systems revealed that increased discharges and sediment loads are capable of forming anabranching planforms both in dryland and temperate climate zones. The sediment type available for transport, often inherited from older sedimentary environments, is an important variable determining whether the channel planform is anabranching, with actively migrating channels, or anastomosing, with stable, straight or sinuous branches. Copyright © 2017 John Wiley & Sons, Ltd.     

Holocene valley aggradation driven by river mouth progradation: examples from Australia

Since the end of the post‐glacial sea level rise 6800 years ago, progradation of river mouths into estuaries has been a global phenomenon. The responses of upstream alluvial river reaches to this progradation have received little attention. Here, the links between river mouth progradation and Holocene valley aggradation are examined for the Macdonald and Tuross Rivers in south‐eastern Australia. Optical and radiocarbon dating of floodplain sediments indicates that since the mid‐Holocene sea level highstand 6800 years ago vertical floodplain aggradation along the two valleys has generally been consistent with the rate at which each river prograded into its estuary. This link between river mouth progradation and alluvial aggradation drove floodplain aggradation for many tens of kilometres upstream of the estuarine limits. Both rivers have abandoned their main Holocene floodplains over the last 2000 years and their channels have contracted. A regional shift to smaller floods is inferred to be responsible for this change, though a greater relative sea level fall experienced by the Macdonald River since the mid‐Holocene sea level highstand appears to have been an additional influence upon floodplain evolution in this valley. Copyright © 2006 John Wiley & Sons, Ltd.     

Log‐jams and avulsions in the San Antonio River Delta,Texas

The San Antonio River Delta (SARD), Texas, has experienced two major avulsions in the past 80 years, and a number of other historical and Holocene channel shifts. The causes and consequences of these avulsions – one of which is ongoing – were examined using a combination of fieldwork, geographic information system (GIS) analysis, and historical information to identify active, semi‐active, and paleochannels and the sequence of shifting flow paths through the delta. The role of deposition patterns and antecedent morphology, large woody debris jams, and tectonic influences were given special attention. Sedimentation in the SARD is exacerbated by tectonic effects. Channel aggradation is ubiquitous, and superelevation of the channel bed above the level of backswamp areas on the floodplain is common. This creates ideal setup conditions for avulsions, and stable, cohesive fine‐grained banks favor avulsions rather than lateral migration. Flood basins between the alluvial ridges associated with the aggraded channels exist, but avulsions occur by re‐occupation of former channels found within or connected to the flood basins. Large woody debris and channel‐blocking log‐jams are common, and sometimes displace flow from the channel, triggering crevasses. However, a large, recurring log‐jam at the site of the ongoing avulsion from the San Antonio River into Elm Bayou is not responsible for the channel shift. Rather, narrow, laterally stable channels resulting from flow splits lead to accumulation of wood. Some aspects of the SARD avulsion regime are typical of other deltas, while others are more novel. These includes avulsions involving tributaries and subchannels within the delta as well as from the dominant channel; tectonic influences on delta backstepping and on channel changes within the delta; avulsions as an indirect trigger for log‐jam formation (as well as vice‐versa); and maintenance of a multi‐channel flow pattern distinct from classic anastamosing or distributary systems. Copyright © 2012 John Wiley & Sons, Ltd.     

Tributary valley impoundment by trunk river floodplain development: a case study from the KwaZulu‐Natal Drakensberg foothills,eastern South Africa

This paper investigates the origin and geomorphic evolution of Stillerust Vlei, a 189 ha wetland located approximately 150 km northwest of Durban in the temperate submontane foothills of the KwaZulu‐Natal Drakensberg Mountains. The investigation confirms the findings of previous research on the arid to semi‐arid South African interior, which established that many floodplain wetlands in eastern South Africa are located upstream of resistant rock barriers (dolerite intrusions) that cross river courses and form stable local base levels. Upstream of these barriers, rivers laterally plane less resistant Karoo sedimentary rocks (sandstones, mudstones), creating broad, low gradient valleys conducive to the formation of floodplain wetlands. In addition, the study examines how local levee and alluvial ridge accretion on the floodplain of Stillerust Vlei has impounded a small tributary valley, and drawing on observations of similar wetlands in the region, the paper explains the origin and geomorphic evolution of wetlands in floodplain‐abutting valleys, and associated streams that commonly become discontinuous toward their confluence with the trunk (floodplain) river. Controls on the origin and geomorphic evolution of Stillerust Vlei are placed within the context of slope‐channel decoupling and (dis)connectivity in sediment delivery, illustrating that wetlands are environments of deposition. As a result of dynamic trunk‐tributary relations, Stillerust Vlei holds a diversity of geomorphic features, and thus provides potential habitat for a diversity of biota. Copyright © 2008 John Wiley & Sons, Ltd.     

Channel avulsion and river metamorphosis: The case of the Thomson River,Victoria, Australia

Channel avulsion occurred on the Thomson River in Victoria, Australia, in 1952 along a 12 km length of the valley. A comparison of the old and new channels reveals considerable differences in channel characteristics. The old channel was perched above the floodplain on an alluvial ridge such that when bankfull capacity was exceeded, floodwaters concentrated on the lowest part of the floodplain some distance away. This is where the new channel formed. It is an incised channel with larger capacity and longer meander wavelength than the old channel and is also shorter and steeper. The new channel is subject to larger floodflows and a more variable flood regime than the old course because of the differences in the channel/floodplain relationship and channel capacity. The resulting concentration of stream power along the new course is responsible for the contrast in channel characteristics and for the more rapid meander migration. This example shows that river metamorphosis can occur without major environmental changes. Measures of channel geometry such as gradient, sinuosity, and meander wavelength therefore cannot be used in palaeohydrological work to infer climatic or other environmental changes without independent supporting evidence. Differences in channel geometry can arise simply from changes in the relationship between the channel and its loodplain.     

Morphological signatures of normal faulting in low‐gradient alluvial rivers in south‐eastern Louisiana,USA

We explore the fluvial response to faulting in three low‐gradient, sand‐bed rivers in south‐eastern Louisiana, USA, that flow across active normal faults from footwall (upstream) to hangingwall (downstream). We calculate sinuosity, migration rate and migration direction in order to identify anomalies spatially associated with fault scarps. In two of the rivers we model one‐dimensional steady water flow to identify anomalies in surface water slope, width‐to‐depth ratio, and shear stress. In each of these rivers there is one location where flow modeling suggests potential channel incision through the footwall, as indicated by relatively high surface water slopes and shear stress values. In one of these footwall locations, the river straightens and width‐to‐depth ratios decrease, likely contributing to higher surface water slopes and shear stress. This is in contrast to previous studies that have proposed increased sinuosity across fault footwalls and decreased sinuosity across hangingwalls. However, in two hangingwall locations we also observe relatively less sinuous channels. Other planform changes on the hangingwall include topographic steering of channels along and towards the fault and one example of an avulsion. The most notable anomaly in migration rate occurs on the hangingwall of a fault where a river has cut off a meander loop. Although fluvial response to faulting varies here, comparatively large and small channels exhibit similar responses. Further, Pleistocene fault slip rates are orders of magnitude lower than the channel migration rates, suggesting that faulting should not be a major influence on the fluvial evolution. Nonetheless, notable channel anomalies exist near faults, suggesting that recent fault slip rates are higher than Pleistocene rates, and/or that low‐gradient alluvial channels are more sensitive to faulting than previous studies have suggested. Rivers appear to be influenced by faulting in this setting, however background rates of meander loop cutoff may be just as influential as faulting. Copyright © 2015 John Wiley & Sons, Ltd.     

A precipiton‐based approach to model hydro‐sedimentary hazards induced by large sediment supplies in alluvial fans

Mountain ranges are frequently subjected to mass wasting events triggered by storms or earthquakes and supply large volumes of sediment into river networks. Besides altering river dynamics, large sediment deliveries to alluvial fans are known to cause hydro‐sedimentary hazards such as flooding and river avulsion. Here we explore how the sediment supply history affects hydro‐sedimentary river and fan hazards, and how well can it be predicted given the uncertainties on boundary conditions. We use the 2D morphodynamic model Eros with a new 2D hydrodynamic model driven by a sequence of flood, a sediment entrainment/transport/deposition model and a bank erosion law. We first evaluate the model against a natural case: the 1999 Mount Adams rock avalanche and subsequent avulsion on the Poerua river fan (West Coast, New Zealand). By adjusting for the unknown sediment supply history, Eros predicts the evolution of the alluvial riverbed during the first post‐landslide stages within 30 cm. The model is subsequently used to infer how the sediment supply volume and rate control the fan aggradation patterns and associated hazards. Our results show that the total injected volume controls the overall levels of aggradation, but supply rates have a major control on the location of preferential deposition, avulsion and increased flooding risk. Fan re‐incision following exhaustion of the landslide‐derived sediment supply leads to sediment transfer and deposition downstream and poses similar, but delayed, hydro‐sedimentary hazards. Our results demonstrate that 2D morphodynamics models are able to capture the full range of hazards occurring in alluvial fans including river avulsion aggradation and floods. However, only ensemble simulations accounting for uncertainties in boundary conditions (e.g., discharge history, initial topography, grain size) as well as model realization (e.g., non‐linearities in hydro‐sedimentary processes) can be used to produce probabilistic hazards maps relevant for decision making. Copyright © 2017 John Wiley & Sons, Ltd.     

Contemporary and palaeo channel patterns and the late quaternary stratigraphy of Cooper Creek,Southwest Queensland,Australia

Braided and anastomosing channels make up two major coexistent networks in the mud-dominated fluvial system of Cooper Creek, Southwest Queensland. The floodplain is characterized by a system of mud braids operative when floods inundate the whole alluvial surface. Anastomosing channels are inset deeper into the floodplain, operate at modern flows, and transport a traction load of sand. Shallow stratigraphic data show that an underlying sand sheet is unrelated to surface channel patterns and was formed by a system of meandering streams. According to preliminary dates based on thermoluminescence, the change from a sand- to mud-dominated fluvial regime took place between 50 000 and 200 000 years B.P., and probably reflects increasing aridity.     

Impact of the magnitude and frequency of debris‐flow events on the evolution of an alpine alluvial fan during the last two centuries: responses to natural and anthropogenic controls

The dynamics and the surface evolution of a post‐LGM debris‐flow‐dominated alluvial fan (Tartano alluvial fan), which lies on the floor of an alpine valley (Valtellina, Northern Italy), have been investigated by means of an integrated study comprising geomorphological field work, a sedimentological study, photointerpretation, quantitative geomorphology, analysis of ancient to modern cartography and consultation of historical documents and records. The fan catchment meteoclimatic, geological and geomorphological characteristics result in fast rates of geomorphic reorganization of the fan surface (2 km²). The dynamics of the fan are determined by the alternation of low‐return period catastrophic alluvial events dominated by non‐cohesive debris flows triggered by extreme rainstorms which caused aggradation and steepening of the fan and avulsion of its main channel, with periods of low to moderate streamflow discharge punctuated by low‐ to intermediate‐magnitude flood events, causing slower but steady topographic reworking. The most ancient parts of the fan surface date back at least to the first half of the 19th century, but most of the fan surface has been restructured after 1911, mainly during the debris‐flow‐dominated events of 1911 and 1987. Phases of rapid fan toe incision and fan degradation have been recognized; since the 1930s or 1940s, the Tartano fan has been subjected to a state of deep entrenchment and narrowing of the main trunk channel and distributary area. Post‐Little Ice Age climate change and present‐day surface uplift rates have been considered as possible explanations for the observed geomorphic evolution, but tectonic or climatic controls cannot account for the order of magnitude of the erosional pace. Anthropogenic controls plausibly override the natural ones: in particular, the building of a dam in the late 1920s, about 2 km upstream of the fan, seems to have triggered fan dissection, having altered the sediment discharge through sediment retention. Copyright © 2011 John Wiley & Sons, Ltd.