L型挡土墙滑裂面确定方法与地震稳定性分析

提出了L型挡土墙两种破坏模式,即长踵板式和短踵板式,且破坏模式受几何参数和物理力学参数影响。研究了两种破坏模式下L型挡土墙滑裂面确定方法和地震稳定性问题,界定了两种破坏模式的临界条件。考虑第二、第三滑裂面产生条件,应用极限分析运动学原理,建立地震荷载作用下L型挡土墙临界状态方程,推导出地震加速度系数表达式。根据极值原理,给出最优解,从而计算得到临界屈服加速度系数及其对应的滑裂面倾角。通过算例分析可知：临界屈服加速度系数小于M-O公式法,长踵板式L型挡土墙滑裂面倾角与坦墙判别公式结果相同,且滑裂面之间的夹角等于90o-φ,即与滑移线场的结论相同。短踵板式L型挡土墙滑裂面夹角近似等于90o-φ。     

土钉墙空间效应和平滑破坏模式的三维分析

在实际工程中,土钉墙稳定性评估一般采用转动破坏模式,且不考虑其空间效应对设计方案的影响,其结果是有时得到的结论与实际状况不相符合.本文采用三维极限分析方法,对土钉墙空间效应和平滑破坏两个方面的问题进行了讨论,并结合一实际工程,对它们进行了分析,得到一些初步结论,以期对实际工程有一定的参考价值.     

Analysis of resistance factors for LFRD of soil nail walls against external stability failures

This paper presents reliability analyses of soil nail walls against two external ultimate limit states, global and sliding stabilities, which are related to the external stability failures of soil nail walls. Reliability analyses are conducted using Monte Carlo simulation technique. Soil nailing is a popular retaining system in highway construction and slope stabilization, and its current design practice is still based on the working stress design. There remains a need to establish a more rational design framework—load and resistance factor design—based on the concept of limit state design and reliability analysis for soil nail walls. The development of load and resistance factor design approach must consider multiple ultimate limit states, associated with external, internal, and facing failures. The analyses of resistance factors against two external failures are conducted in this study considering various influencing factors, including statistical parameters of soil friction angle, ultimate bond strength between soil and nails, soil type, wall geometry (wall height, back slope angle, and face batter angle), and nail configurations (nail inclination angle, drillhole diameter, and nail spacing). In the end, a series of resistance factors are proposed for potential application of load and resistance factor design approach against external failures for soil nail walls according to different design codes.     

Analysis and Design of Retaining Wall having Reinforced Cohesive Frictional Backfill

The case of a rigid wall with inclined back face retaining reinforced cohesive-frictional backfill subjected to uniformly distributed surcharge load has been analyzed using limit equilibrium approach. The analysis considers the stability of an element of the failure wedge, which is assumed to develop in the reinforced earth mass adjoining the back face of wall. The non-dimensional charts have been developed for computing the lateral earth pressure on wall and the height of its point of application above the base of wall. The theoretical findings have been verified by model tests on a rigid wall retaining a dry cohesive-frictional soil reinforced by geogrid strips. Experimental results are in good agreement with the theoretical predictions. A design example has been included to illustrate the design procedure.     

非线性破坏准则下边坡稳定性极限分析斜条分法

考虑坡顶均布荷载和地震效应典型情况下,将边坡滑体进行任意斜条块划分,建立了具有倾斜界面的多块体破坏模型。基于极限分析上限法和非线性摩尔-库仑破坏准则,考虑岩体内正应力的不均匀性,引入多点切线法和强度折减法推导得出边坡临界破坏状态下的安全系数Fs通用计算公式。采用序列二次规划法对安全系数Fs的目标函数进行最优化计算,并与既有研究成果进行对比分析,其结果具有较好的一致性,相对误差不超过3.565%,表明了该方法的正确性。同时对比传统单点切线法计算结果,多点切线法较单点切线法获得的边坡安全系数值偏小,表明了多点切线斜条分法偏于保守,是安全的。参数分析表明坡顶均布荷载、地震效应和非线性参数均对边坡安全系数及潜在临界滑裂面有重要影响。多点切线法引入非线性摩尔-库仑破坏准则对边坡进行稳定性极限分析,为相关研究人员提供了一种新的思路与方法。     

System reliability-based analysis of cantilever retaining walls embedded in granular soils

Reliability-based analysis of cantilever retaining walls requires consideration of different failure mechanisms. In this paper, the reliability of soil-wall system is assessed considering two failure modes: rotational and structural stability, and the system reliability is assumed as a series system. The methodology is based on Monte Carlo Simulation (MCS), and it deals with the variability of the design parameters in the limit equilibrium analysis of a wall embedded in granular soil. Results of the MCS indicate that the reliability of the failure components increases exponentially by increasing the variability of design parameters. The results of the system reliability indicate how the system reliability is different from the component reliabilities. The strength of the weakest component influences the reliability of the system. The system reliability index increases with the wall section gradually. However it remains constant for the rotational failure mode.     

2D modelling of a dry joint masonry wall retaining a pulverulent backfill

This work focuses on an analysis of dry joint retaining structures based on yield design theory: the stability of the masonry is assessed using rigid block and shear failure mechanisms in the wall and its backfill. An application of this simulation on 2D scale‐down brick and wood models is then addressed, showing close agreement between theoretical predictions and experimental results. Further development on this work, including application of this theory on dry‐stone retaining walls, is discussed as a conclusion. Copyright © 2009 John Wiley & Sons, Ltd.     

地震条件下悬臂式挡墙主动土压力的极限分析方法

为确定地震条件下悬臂式挡土墙主动土压力,考虑假想坦墙墙背的可能不同位置,给出了墙后填土5种可能的失稳破坏模式;在此基础上,采用拟静力法,基于极限分析上限定理,推导了作用于坦墙墙背上的地震主动土压力计算公式,包括填土性质、填方坡面倾角、踵板长度、墙体高度、水平及竖向地震影响系数等多因素,其中除填土黏聚力与竖向地震影响系数与该土压力呈线性相关性外,其余因素呈非线性影响。实例分析表明,基于本方法地震土压力而计算的墙体抗滑与抗倾稳定系数,多数情况下均比经典的Mononobe-Okabe法略偏大;在填土中存在第二破裂面情况下,以踵板下边缘作为假想墙背端点的计算模式相对略偏不安全;竖直假想墙背模式相应的土压力计算值最小,但相应的墙体稳定系数却不一定最大。     

Stability analysis of membrane‐reinforced curved earth retaining walls,using a multiphase approach

The stability analysis of curved earth retaining walls, stabilized by reinforcing membranes, is investigated by means of a multiphase model developed in the framework of the yield design approach. This model is an extension of that previously developed for soils reinforced by linear inclusions. It combines the advantage of a homogenization approach in terms of improved computational efficiency, with its capability to account for a specific soil–reinforcement failure condition, in a rational and systematic way. Application of this model is performed on the illustrative example of a cylindrical‐reinforced retaining wall by means of the kinematic approach of yield design, which provides upper bound estimates for the retaining wall stability factor. Nondimensional charts are finally presented assessing the influence of relevant parameters such as the curvature of the wall, the length of the reinforcing membranes or the reinforcement pull‐out resistance. Copyright © 2009 John Wiley & Sons, Ltd.     

基于尖点突变理论的浆砌块石边坡稳定性研究

根据影响浆砌块石挡土墙边坡稳定性的主要控制变量：挡土墙的垂直度i、挡土墙高度h、填料的内摩擦角 、墙后边坡土的重度 、土对挡土墙基底的摩擦系数 、土对挡土墙墙背的摩擦角 等6个因素变量,利用正交设计原理优化试验设计方案,结合库仑理论与力的多边形法,分析计算浆砌块石挡土墙边坡的安全系数,最后用尖点突变理论的突变级数法进一步判断边坡的稳定性。研究结果表明：影响挡土墙边坡稳定性的6个主要控制变量因素的主次关系为 ;在分析挡土墙边坡稳定性时,采用突变级数法进行计算判断,可以直观地判断边坡的稳定情况,从而弥补工程中运用传统的最小安全系数法进行判断出现的模糊不确定的情况。     

基于方位离散线性化的上限原理有限元法

上限原理有限元法不仅可以得到边坡的安全系数,还可以给出临界滑动面,且具有比极限平衡法更严谨的理论基础,因此,拥有更广阔的应用前景。针对传统的上限有限元法不能考虑强度各向异性的问题,提出了一种新的摩尔-库仑屈服面线性化方法。该方法在对方位角离散化的基础上,建立了线性化的方位离散塑性流动约束方程,丰富了基于线性规划的上限法理论。两个算例结果表明：该方法可以稳定地从极限解的上方收敛;且对边坡进行稳定性分析,若忽略了边坡的强度各向异性,则会高估边坡的稳定性,得到较大的安全系数。     

基坑围护结构系统的性态及其状态变量

视基坑围护与支撑结构２为一共同变形体系统，且是一耗散结构系统，将现场量测的基坑围护变形视为该系统的外观表征，利用这些变形数据计算了上海几种常用围护结构系统的吸引子维数，探讨了基坑系统的力学性态，状态变量及现行的设计，有助于基坑稳定性的分析。     

齿坎式挡土结构物极限抗滑力研究

以齿坎式挡土结构物现场抗滑试验为研究对象,运用强度折减的有限元方法,研究了齿坎长度分别为0、0.7、1.0 m的挡土结构物的极限抗滑力和齿坎式挡土结构物的滑动破坏模式,以及位于软弱地基中齿坎在挡土结构物中的抗滑机理,提出了齿坎式挡土结构物的综合稳定性安全系数的概念。研究表明：理论研究结果能很好地表征现场试验成果;随着齿长的增加,齿坎式结构物由滑移破坏转变为倾覆破坏;强度折减的有限元方法进行挡土结构物的极限设计是完全合理的,该方法可应用于齿坎式挡土结构物的工程设计中。     

Internal Stability Analysis of Reinforced Earth Retaining Walls

The stabilization of slopes by the technique of reinforced earth (Terre Armée) is a very economical and reliable technique. We propose in this paper to check the overall internal stability of the reinforced earth retaining walls by three mechanical models, using the analytical method of the limit equilibrium (failure). The main objective of this paper is to compare these failure mechanical models with the failure models obtained by numerical analysis (code FLAC 2D), in order to validate the most realistic and more unfavourable failure models. Parametric and comparative studies carried out have allowed us to bring a very useful knowledge concerning the study of the internal stability of the reinforced earth retaining walls. It also proposed a theoretical mechanical model of calculation proved by numerical simulation.     

铁路台阶式加筋土挡墙潜在破裂面特征模型试验

铁路台阶式加筋土挡墙的设计方法尚不成熟,现有设计方法不能满足铁路边坡工程实践的需求。潜在破裂面的确定是加筋土挡墙设计的关键,但现行规范仅对10 m以下单级加筋土挡墙的潜在破裂面有了明确的规定。为了研究台阶式加筋土挡墙在铁路荷载作用下潜在破裂面的特征,设计了1:4的大比例尺二级台阶式加筋土挡墙室内模型试验,以周期性加卸载的方式模拟铁路荷载,通过监测墙面水平位移、墙顶沉降及土工格栅筋带变形,分析确定潜在破裂面的位置和形状。试验结果表明：I级墙（下级墙）潜在破裂面形状与现行规范中的0.3H法破裂面类似,但位置更深,且下部破裂面更缓,表明潜在不稳定范围更大;II级墙（上级墙）潜在破裂面形状与朗肯主动破裂面基本一致,但并未从II级墙坡脚剪出,而是内移刺入I级墙体;研究结果可为铁路台阶式加筋土挡墙的设计提供理论参考。     

洪水致弯曲河道挡墙稳定性衰变

天然河道蜿蜒曲折,河湾处环流助长紊动、引发凹岸淘蚀冲刷,导致沿河公路挡墙水毁频发。针对弯道水流运动规律,对洪水条件下弯道挡墙进行受力分析;基于挡墙稳定性分析力学模型,推导了弯曲河道挡墙稳定系数计算公式,给出挡墙基底极限冲深计算方程。通过算例验证了在河湾平缓条件下弯道洪水冲击计算的合理性,并对挡墙稳定性衰减影响因素进行分析。结果表明：洪水上涨时,在墙底未发生冲刷条件下,随着弯道处洪水对挡墙的冲击荷载增大,挡墙稳定性提高;在墙底发生冲刷条件下,挡墙稳定性降低,墙底淘蚀可能导致挡墙倾覆失稳。洪水陡落时,挡墙稳定性随挡墙前后水位差增大而降低,挡墙的抗滑稳定系数衰减速度比抗倾覆稳定系数衰减速度更快,挡墙滑移失稳可能性较大。得出的挡墙稳定系数计算方法的结果与现场情况基本吻合,可为类似沿河挡墙的设计与研究提供理论参考。     

Stability of anchored sheet wall in cohesive‐frictional soils by FE limit analysis

This study extends the limit analysis techniques used for the computation of strict bounds of the load factors in solids to stability problems with interfaces, anchors and joints. The cases considered include the pull‐out capacity of multi‐belled anchors and the stability of retaining walls for multiple conditions at the anchor/soil and wall/soil interfaces. Three types of wall supports are examined: free standing wall, simply supported wall and anchored wall. The results obtained are compared against available experimental and numerical data. The conclusion drawn confirms the validity of numerical limit analysis for the computation of accurate bounds on limit loads and capturing failure modes of structures with multiple inclusions of complex interfaces and support conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

Controlling the safety of geotechnical structures: a proposed approach

Summary This paper considers the safety of geotechnical structures using various design philosophies which include the global safety method and a number of limit state design methods. The methods are considered individually and their treatment of uncertainties of design briefly discussed in terms of parameter and system uncertainty. Each method is not designed to produce a definitive measure of safety, but should be viewed as an aid in the process of controlling or managing safety. Crucial to all design methods is the idea of a design parameter. However, in certain instances it is often not clear whether a design parameter should be an upper or lower bound on its possible value. A proposed limit state design method for overcoming this problem is outlined, based on putting bounds on parameters. An example of a reinforced concrete cantilever retaining wall is used to demonstrate its advantages over current methods. The proposed method offers a more rational approach to the design of retaining structures.     

对坦墙墙后土体第二破裂面的研究

基于土的塑性极限分析理论，从挡土墙最小抗倾覆安全系数和挡土墙背上的最大主动土压力两个角度，分别研究了坦墙后土体中第二破裂面的位置，认为在复杂的挡土结构墙背条件下，用最小抗倾覆安全系数来研究挡土墙后土体的破坏机制较为合理。     

基于灰色关联与模糊数学的重力式挡土墙震害评估

龙门山地区强震荷载导致大量已建边坡支挡结构严重受损,如何对震区受损挡土墙进行震害评估成为亟待解决的技术难点。本文首先通过对研究区挡土墙的震害分析,总结出其主要破坏模式包括滑移破坏、沉降破坏、倾覆破坏、墙身破坏以及越顶破坏5类。然后根据全面性、重要性以及科学性原则对影响震害评价的因子进行定性分析和分类,并结合挡墙的破坏模式,综合分析得到挡土墙安全评估的敏感性因子和一般因子。将震害范围60%作为挡墙评价的敏感性因子,而一般因子分为两级共10个指标,包括:滑移距离,沉降深度,倾斜角度,裂缝数量,裂缝长度比,开裂深度比,开裂宽度,错动距离,垮塌范围,覆盖范围。最后,采用灰色关联分析与模糊数学理论相结合的方法构建挡土墙震害评估体系,从而变事后处理为事先预防,为灾后恢复重建服务。