X射线粉晶衍射仪在千枚岩鉴定与分类中的应用

以往千枚岩是依据显微镜下观察岩石结构构造及矿物成分进行分类定名.实际上千枚岩中鳞片状绿泥石和黑云母以及微粒石英、钾长石和斜长石在岩石薄片中区分十分困难.为了准确鉴定千枚岩中鳞片状和微粒状造岩矿物种类及其相对含量,利用X射线粉晶衍射半定量技术对19件千枚岩岩石进行分析测试.研究结果显示：利用云母、绿泥石、石英、钾长石和斜长石等造岩矿物X射线衍射峰的明显差异,结合X射线衍射全谱拟合半定量分析测试技术,能快速检测云母、绿泥石、石英、钾长石和斜长石等造岩矿物种类与含量.实践证明,将千枚岩岩石野外观察、岩石薄片鉴定和X射线粉晶衍射技术紧密结合起来,才能准确定出千枚岩岩石的名称.     

X射线粉晶衍射法在片麻岩鉴定与分类中的应用

利用偏光显微镜岩石薄片鉴定和X射线粉晶衍射物相分析技术,对34件片麻岩样品矿物组分进行检测.两种方法分析结果比对显示,有18件岩石样品定名一致,其余16件岩石样品详细定名有差异.偏光显微镜鉴定技术的优势在于能准确定出岩石构造和结构,能鉴定出更多的金属矿物、电气石、榍石、磷灰石、绿帘石,有效区分白云母和黑云母;X射线粉晶衍射法优势在于更准确区分出岩石中层状硅酸盐矿物绿泥石、蒙脱石和云母,确定钾长石、钠长石和石英矿物种类与含量.研究表明：片麻岩鉴定应该把偏光显微镜岩石薄片法与X射线粉晶衍射矿物半定量技术结合起来,才能更好地确定片麻岩的矿物组分,为地学研究提供更符合客观实际的技术数据和分析结论.     

X射线粉晶衍射仪在辽宁瓦房店金伯利岩蚀变矿物鉴定中的应用

瓦房店金伯利岩热液蚀变强烈,原岩矿物组分几乎蚀变殆尽,显微镜下对蚀变矿物鉴定相当困难.利用X射线粉晶衍射技术对蚀变金伯利岩物相进行系统检测,结果显示：42号岩管金伯利岩主要矿物为蛇纹石、金云母和滑石,有少量方解石、锐钛矿、磷灰石、石英、钛铁矿、钙钛矿、榍石、磁铁矿和绿泥石;石灰窑1号无矿金伯利岩岩管主要矿物为蛇纹石、金云母和白云石,有少量方解石、锐钛矿、磷灰石、滑石、磁铁矿和绿泥石;9号无矿金伯利岩岩脉主要矿物为方解石和石英,有少量绿泥石和重晶石;51号贫矿金伯利岩岩管主要矿物为蛇纹石和金云母,方解石化作用不均匀,白云石化作用普遍,有少量锐钛矿、滑石、磁铁矿、绿泥石、磷灰石、钛铁矿、石英;30号贫矿岩管样品风化严重,主要矿物为蒙脱石,有少量方解石、滑石、蛇纹石、榍石、磷灰石.实践证明,采用X射线粉晶衍射仪鉴定金伯利岩蚀变矿物组合是一种非常可行的技术手段.     

X射线粉晶衍射法在变粒岩鉴定与分类中的应用

变粒岩的鉴定通常以显微镜鉴定技术为主,但在显微镜下区分颗粒细小的长石、石英及绿泥石、蒙脱石、云母等层状硅酸盐矿物十分困难,仅通过显微鉴定技术对变粒岩进行定名可能产生较大误差,这对地质填图和原岩恢复工作会造成一些偏差,导致得出错误的地质结论。随着X射线衍射分析技术的发展,该技术已广泛应用于矿物学和岩石学的研究,本研究将结合X射线粉晶衍射技术,对显微镜下难以区分的细小矿物进行鉴定。共选用23件变粒岩样品,利用X射线粉晶衍射分析和显微镜岩石薄片鉴定技术,对变粒岩矿物组分进行检测,用X射线粉晶衍射矿物半定量分析结果验证岩石薄片鉴定结果准确性。显微镜岩石薄片鉴定结果与X射线粉晶衍射物相分析结果对比显示,10件样品定名一致,其余13件样品详细定名有差异。通过分析产生差异的原因,可以认为显微镜岩石薄片鉴定优势在于能确定岩石结构和构造,以及常见矿物组分;X射线粉晶衍射法的优势在于能检测出显微镜下较难区分的细小石英和长石颗粒的相对含量,并能检测出颗粒较小的绿泥石、蒙脱石及云母等层状硅酸盐矿物,该方法对含量较少、颗粒较细的矿物检测效果较好。实验证明将显微岩石薄片鉴定技术和X射线粉晶衍射技术相结合,才能更准确对变粒岩进行定名,为地学研究提供更符合客观实际的技术数据和分析结论。     

X射线粉晶衍射仪在山东蒙阴金伯利岩蚀变矿物鉴定中的应用

山东蒙阴金伯利岩组成矿物以蚀变矿物为主,X射线粉晶衍射仪鉴定结果显示无矿金伯利岩矿物组分为方解石、白云石、石英、钙锆钛矿,标志性矿物为白云石和钙锆钛矿;贫矿金伯利岩矿物组分为蛇纹石、方解石、钙铝榴石、磁铁矿和金云母,标志性矿物为钙铝榴石;富矿金伯利岩矿物组分为蛇纹石、方解石、绿泥石、磷灰石、磁铁矿和金云母,标志性矿物为绿泥石和磷灰石。采用X射线粉晶衍射仪鉴定金伯利岩蚀变矿物组合,寻找蚀变矿物组分变化与金伯利岩含矿性的关系,利用标志性的蚀变矿物判断金伯利岩无矿、贫矿还是富矿,是非常有意义的。     

滑石中石棉的鉴定方法研究

如何鉴定出滑石中含有的微量石棉,多年来一直困扰着分析界的人士.笔者经过多年的实践和大量资料的积累,以透射偏光显微镜观察和X-射线粉晶衍射为主要方法,以油浸法为辅助方法,对滑石中含有的各种微量石棉,进行快速准确的鉴定.本文列出了各种石棉的X-射线粉晶衍射特征数据.并以滑石中含有的透闪石石棉为例,详细论述了这一鉴定方法的科学性及合理性.若样品为块状岩石,则需要先在偏光显微镜下观察,再进行X射线粉晶衍射进-步验证.若样品为粉末状,则需要先进行X射线粉晶衍射分析,再进行油浸薄片观察.     

X射线粉晶衍射法在板岩鉴定与分类中应用

以往对板岩的分类和定名主要以显微镜下观察到的岩石结构构造及矿物成分为依据,但在工作中发现显微镜下区分细小的砂屑矿物、碳酸盐矿物和粘土矿物种类十分困难,仅利用显微鉴定技术对板岩进行分类定名必然产生很大的误差,这给地质填图及原岩恢复工作带来了极大困难.为此在板岩岩石分类命名工作中,笔者利用X射线粉晶衍射法对22件板岩样品进行分析,结果发现该方法既能准确鉴定出显微镜下不易区别的石英与长石细小碎屑物质和碳酸盐矿物种类,又能检测出云母、绿泥石、蒙脱石和高岭石鳞片状矿物,岩石中矿物组分检出率明显比用显微镜观察高出很多.实践证明,只有把显微鉴定技术与X射线粉晶衍射法有机的结合起来,才能准确鉴定板岩的种类和解决定名不准确的难题.     

浙江岩溶碳汇估算

一、名词解释 碳酸盐岩沉积形成的碳酸盐矿物组成的岩石的总称。主要为石灰岩和白云岩两类。主要矿物成分是方解石、白云石、铁白云石、菱镁矿等,其次为石英、云母、长石和粘土矿物等。     

X射线荧光光谱分析技术在大理岩鉴定与分类中的应用

大理岩的鉴定与分类主要依靠岩石薄片鉴定及X射线衍射(XRD)矿物半定量检测技术。工作中发现,岩石薄片鉴定技术及XRD矿物半定量检测技术所测得矿物组分含量很少一致,这就需要引入其他技术对岩石薄片鉴定及XRD矿物半定量检测结果加以验证。本文利用X射线荧光光谱仪(XRF)对野外采集的32件大理岩样品进行全岩化学成分分析,以岩石化学成分为基础,分析岩石杂质系数、镁质系数和钙质系数特征,对大理岩进行分类。结果表明:方解石大理岩、白云石大理岩、菱镁矿大理岩的镁质系数值分别为0.01~0.13、0.40~0.46、0.97~0.98,钙质系数值分别为0.78~0.84、0.30~0.49和0.01~0.02,不同类型大理岩的钙质系数和镁质系数明显不同,可以作为划分大理岩类型的主要依据。当岩石中SiO_2+Al_2O_3含量大于35%(杂质系数大于为1.20),不能定为大理岩,只有岩石中SiO_2+Al_2O_3含量小于30%(杂质系数小于1.00)时,可定为大理岩。杂质系数、镁质系数和钙质系数的应用,能够校正岩石薄片鉴定法及XRD矿物半定量法矿物含量检测不一致的问题,使大理岩分类定名更加准确。     

新疆伊犁昭苏黄土剖面中的矿物组成及其风化意义

应用X射线衍射(XRD)分析技术,对处于西风区的新疆伊犁昭苏黄土剖面中的138个全岩样品和9组分粒级样品进行了分析,获得了该剖面的矿物组分、含量及其粒径分布信息.昭苏黄土主要由石英、方解石、绿泥石、斜长石、普通角闪石、钾长石、白云石和白云母组成;方解石在各个粒级组分中分布相对均匀;石英、白云石、斜长石、普通角闪石和钾长石主要赋存于粗颗粒中;绿泥石在细颗粒中的含量明显较高;白云母在16 ～32 μm粒级组分中含量较低,在其它粒级组分中的含量则相对更高.各矿物学指标揭示了昭苏黄土剖面的化学风化程度整体较低且变化幅度不大,但古土壤层的化学风化程度稍强于黄土层;物理风化则经历了由强到弱的两个波动过程.     

X射线衍射-X射线荧光光谱-电子探针等分析测试技术在玄武岩矿物鉴定中的应用

玄武岩的鉴定通常采用显微镜镜下判定,鉴定结果容易受到鉴定人员的专业水平和主观因素、切片方位的影响,光性特征有差异,再者颗粒细小的矿物还受到光学显微镜本身放大倍数的限制也很难准确鉴定。当前的鉴定方法已由传统的显微镜向现代分析仪器(X射线衍射仪、电子探针、X射线荧光光谱仪等)综合研究方向发展。本文采用X射线粉晶衍射(XRD)和显微镜镜下观测相结合的方法,对安徽女山玄武岩(未经蚀变)和团山玄武岩(经过蚀变)进行鉴定,并采用X射线荧光光谱仪(XRF)和电子探针对鉴定结果进行验证。结果表明:女山玄武岩用显微镜鉴定主要由基质(74%,斜长石44%+辉石30%)和斑晶(13%)组成,还含有少量金属矿物(8%)及较大颗粒石英捕掳晶(5%);其中,基质部分的斜长石经XRD分析可进一步确定为拉长石,辉石主要为普通辉石(单斜辉石),少量金属矿物为钛铁矿。团山玄武岩用显微镜鉴定主要由基质(75%,斜长石50%+辉石25%)和斑晶(9%)组成,还含有少量绿泥石充填的杏仁体;其中,基质部分的斜长石经XRD分析可进一步确定为微斜长石,蚀变矿物为蒙脱石而非薄片鉴定中的绿泥石。综合XRD和相关技术鉴定结果可确定,女山玄武岩主要矿物为拉长石、辉石、钛铁矿;团山玄武岩主要矿物为微斜长石、辉石、蒙脱石。研究显示,单独的显微鉴定技术在含蚀变矿物的玄武岩鉴定中会产生较大偏差,而结合XRD等多种分析测定技术可以快速鉴定出矿物种类,尤其对颗粒较小的矿物鉴定的准确度更高。     

Ultra-high-pressure (UHP) marble and eclogite in the Su-Lu UHP terrane, eastern China

A large mass of dolomitic marble including many eclogite blocks occurs in orthogneisses of the Rongcheng area of the Su-Lu province, eastern China. The marble consists mainly of dolomite, calcite (formerly aragonite), graphite, forsterite, diopside, talc, tremolite and phlogopite. Aggregates of talc and calcite occur at the boundary between dolomite and diopside. Tremolite is a reaction product between talc and calcite. Eclogite blocks are rimmed by dark green amphibolite. The primary mineral assemblage in the core of eclogite is Na-bearing garnet (up to 0.2  wt% Na₂O), omphacitic pyroxene, clintonite and rutile. Secondary minerals are pargasitic/edenitic amphibole, plagioclase, sodic diopside, chlorite, zoisite and titanite. The peak metamorphic conditions, based on stability of the dolomite+forsterite+aragonite (now calcite)+graphite assemblage, under conditions where tremolite is unstable, are estimated at T  =610–660 °C and P =2.5–3.5  GPa (for X _{CO=0.001). A reaction between dolomite and diopside to form talc under tremolite-unstable conditions indicates a temperature decrease under ultra-high-pressure conditions (} P >2.4  GPa, X _{CO<0.0013). The formation of secondary tremolite is consistent with a nearly adiabatic pressure decrease post-dating the ultra-high-pressure metamorphism. The temperature decrease under ultra-high-pressure conditions preceding decompression may reflect the underplating of a cold slab, and the rapid decompression probably corresponds to the upwelling stage promoted by the delamination of a downwelling lithospheric root. The} P – T  conditions of the amphibolitization stage are estimated at <0.9  GPa and <460 °C, and are similar to conditions recorded by the surrounding orthogneisses.     

兰州市取暖期可吸入颗粒物中单颗粒矿物组成特征

为研究兰州市2005年冬季大气可吸入颗粒物(PM10)中单颗粒的矿物组成,用能谱扫描电镜识别和统计了兰州市区(东方红广场)和郊区(榆中县)两个采样点的单矿物颗粒。结果在市区样品中识别出方解石、伊/蒙混层、石英、斜长石、伊利石、石膏、绿泥石、高岭石、浊沸石和钾长石等21种矿物,前7种占统计总量的75%以上;郊区样品中识别出20种矿物,以方解石、石英、伊利石、绿泥石、斜长石和伊/蒙混层为主(占70%以上),与市区相比缺少钾石膏、金红石和水铝酸钙而增加了硫酸镁和磷灰石。总体来看,大气PM10中的矿物颗粒可分为粘土类、长石类、碳酸盐类、硫酸盐类、氧化物类和其他六类,以粘土类和碳酸盐类矿物为主(约占60%);冬季市区颗粒物表面的“硫化”现象较郊区严重;这些矿物颗粒主要来自地表土,人为排放和大气中二次化学反应生成的矿物的贡献较小。     

Ultra-high-pressure metamorphism of carbonate rocks in the Dabie Mountains, central China

Abstract Widespread ultra-high-P assemblages including coesite, quartz pseudomorphs after coesite, aragonite, and calcite pseudomorphs after aragonite in marble, gneiss and phengite schist are present in the Dabie Mountains eclogite terrane. These assemblages indicate that the ultra-high-P metamorphic event occurred on a regional scale during Triassic collision between the Sino-Korean and Yangtze cratons. Marble in the Dabie Mountains is interlayered with coesite-bearing eclogite and gneiss and as blocks of various size within gneiss. Discontinuous boudins of eclogite occur within marble layers. Marble contains an ultra-high-P assemblage of calcite/aragonite, dolomite, clinopyroxene, garnet, phengite, epidote, rutile and quartz/coesite. Coesite, quartz pseudomorphs after coesite, aragonite and calcite pseudomorphs after aragonite occur as fine-grained inclusions in garnet and omphacite. Phengites contain about 3.6 Si atoms per formula unit (based on 11 oxygens). Similar to the coesite-bearing eclogite, marble exhibits retrograde recrystallization under amphibolite–greenschist facies conditions generated during uplift of the ultra-high-P metamorphic terrane. Retrograde minerals are fine grained and replace coarse-grained peak metamorphic phases. The most typical replacements are: symplectic pargasitic hornblende + epidote after garnet, diopside + plagioclase (An₁₈) after omphacite, and fibrous phlogopite after phengite. Ferroan pargasite + plagioclase, and actinolite formed along grain boundaries between garnet and calcite, and calcite and quartz, respectively. The estimated peak P–T conditions for marble are comparable to those for eclogite: garnet–clinopyroxene geothermometry yields temperatures of 630–760°C; the garnet–phengite thermometer gives somewhat lower temperatures. The minimum pressure of peak metamorphism is 27 kbar based on the occurrence of coesite. Such estimates of ultra-high-P conditions are consistent with the coexistence of grossular-rich garnet + rutile, and the high jadeite content of omphacite in marble. The fluid for the peak metamorphism was calculated to have a very low X_CO2 (<0.03). The P–T conditions for retrograde metamorphism were estimated to be 475–550°C at <7 kbar.     

Geochemical processes,evidence and thermodynamic behavior of dissolved and precipitated carbonate minerals in a modern seawater/freshwater mixing zone of a small tropical island

The geochemical processes and thermodynamic behavior of dissolved and precipitated carbonate minerals controlling the hydrochemistry of an aquifer in the seawater/freshwater mixing zone of a small island are identified. Field and laboratory analyses, geochemical modeling (PHREEQC) and multivariate statistical analysis (MSA) provide a quantitative interpretation for the geochemistry of the carbonate-dominated aquifer. Geochemical analyses and modeling results show that dissolution and re-precipitation of CaCO₃ are the prevalent processes governing geochemical reactions in the mixing zone. Furthermore, this was confirmed by coherent statistical output that incorporates Principle Component Analysis (PCA) and k-means Cluster Analysis (k-CA). Generally, the composition of the lowland sandy soil was rather homogeneous and was primarily composed of quartz, aragonite, calcite and Mg-calcite. Thermodynamic model calculations indicate that the carbonate minerals calcite, aragonite and dolomite are supersaturated in the mixing zone. Nevertheless, Powder X-ray Diffraction (PXRD) and Scanning Electron Microscope (SEM) examination verified the occurrence of low-Mg-calcite (LMC) and the absence of dolomite, attributed to thermodynamic/kinetic hindrance, cation disorder and the presence of dolomite crystal growth rate inhibitors (such as SO₄). The results suggest that dissolution of aragonite and precipitation of LMC drives the solid phase geochemistry in the small tropical island aquifer.     

A Study on the Mineralogical Features of the Oxidation-reduction of Graphite Deposit in Pingdu,Shandong

The mineralogical features of the oxidation-reduction of graphite deposit in pingdu, Shandong province were studied by field search, polarization microscope, X-ray diffraction (XRD) and SEM. The results show that, the major rocks of the reduction graphite zone are graphite-quartz anorthosite, gabbro. The major rocks of the oxidation graphite zone are marble with graphite, biotite granite, monzogranite. The main minerals of the reduction zone are plagioclase, pyroxene, quartz, pyrite. The graphite is aphanitic graphite appearing as dense massive, layered, spherical aggregates. The main minerals of the oxidation zone are calcite, quartz, K-feldspar, biotite, amphibole, chlorite. The graphite is flake graphite uniformly dispersed in the loose, and strongly erosion rocks. A large number of rocks in the area have been suffered chloritization, regional metamorphism, indicating that the formation of the graphite deposit should be related with gabbro melting. The carbon source in the lower part was taken into the mine, and then experienced regional metamorphism.