Geophysical profile of the Roter Kamm impact crater,Namibia

Abstract— New gravity and magnetic data were obtained along ground profiles across the Roter Kamm impact crater in the southern Namib desert of Namibia. As the traverses of previous studies did not extend sufficiently beyond the crater rim, it had not been possible to adequately determine the regional background values. The gravity results of this study are similar to those obtained by Fudali in 1973, in that a negative, near-symmetrical anomaly was obtained over the crater center. This anomaly conforms to the results expected for a sediment and impact breccia-filled, simple bowl-shaped crater. The magnetic results of this study, however, are different to those previously reported, which is most probably as a result of the longer profiles used in this new study. A slight positive magnetic anomaly was obtained over the crater interior. Short-wavelength, high-amplitude anomalies observed in the vicinity of the crater rim reflect magnetization contrasts that are probably related to brecciation and block rotation. Modelling of the positive magnetic anomaly indicates the possibility of a small magnetic body or lining at the crater floor-breccia interface in the interior of the crater. Also presented is a 10 m contour digital elevation model of the crater and its environs.     

Review of the Barringer crater studies and views on the crater’s origin

The first scientific studies of Barringer crater, Arizona, USA (also known as the Coon Butte crater), began more than a century ago; however, views on the crater’s origin have been contradictory. At the beginning of the 20th century, D.M. Barringer, a mining engineer, became interested in the possibility of finding large useable iron masses in this crater and searched for these masses for more than 25 years, standing up for the idea of the crater’s meteoric origin, contrary to the objections of opponents who tried to indicate that the crater was caused by terrestrial geological processes. Mining, accompanied by different scientific works, made it possible to obtain reliable data on the structure and impact origin of the crater; however, attempts to find meteorite iron deposits in this crater were unsuccessful. Barringer crater was the first object on the Earth where purposeful studies were performed for many decades and made it possible to develop many criteria of the impact origin of circular geological structures and mechanisms of formation of these structures, as well as to compare this crater with similar morphostructures on the surfaces of other planets. These studies have played an important role in the formation and development of the theory of impact cratering, which has been generally acknowledged in present-day science.     

Morphology of craters generated by hypervelocity impacts of micron‐sized polypyrrole‐coated olivine particles

To understand the process of cosmic dust particle impacts and translate crater morphology on smoothed metallic surfaces to dust properties, correct calibration of the experimental impact data is needed. This article presents the results of studies of crater morphology generated by impacts using micron‐sized polypyrrole (PPy)‐coated olivine particles. The particles were accelerated by an electrostatic dust accelerator to high speeds before they impacted onto polished aluminum targets. The projectile diameter and velocity ranges were 0.3–1.2 μm and 3–7 km s^?1. After impact, stereopair images of the craters were taken using scanning electron microscope and 3‐D reconstructions made to provide diameter and depth measurements. In this study, not just the dimensions of crater diameters and depths, but also the shape and dimensions of crater lips were analyzed. The craters created by the coated olivine projectiles are shown to have complicated shapes believed to be due to the nonspherical shape of the projectiles.     

Ejecta from impact craters

An important feature of impacts into Solar System bodies is the fate of crater ejecta, the near-surface material launched during the highly dynamic crater formation process. Laboratory measurements of impact crater ejecta from 18 studies are summarized. The data are examined and used to assess our understanding of how the ejecta velocity and mass distributions depend on the conditions of an impact event. The effects of impact speed on the ejecta are reasonably well understood, but the dependences on target properties such as strength and porosity are only poorly constrained. A point-source scaling model for the ejecta mass and velocity distributions is developed and fit to the data for several classes of materials distinguished by porosity.     

Asymmetric signatures in simple craters as an indicator for an oblique impact direction

Abstract— In oblique impacts with an impact angle under 45°, the bilateral shape of the distal ejecta blanket is used as the strongest indicator for an impact vector. This bilateral symmetry is attenuated and is superimposed by radial symmetry towards the crater rim, which remains circular for impact angles down to 10–15°. The possibility that remnants of bilateral symmetry might still be present in the most proximal ejecta, the overturned flap and the crater rim was explored with the intention of deducing an impact vector. A model is presented that postulates bilateral patterns using proximal ejecta trajectories and predicts these patterns in the orientation of bedding planes in the crater rim. This model was successfully correlated to patterns described by radial grooves in the proximal ejecta blanket of the oblique Tooting crater on Mars. A new method was developed to detect structural asymmetries by converting bedding data into values that express the deviation from concentric strike orientation in the crater rim relative to the crater center, termed “concentric deviation.” The method was applied to field data from Wolfe Creek crater, Western Australia. Bedding in the overturned flap implies an impactor striking from the east, which refines earlier publications, while bedding from the inner rim shows a correlation with the crater rim morphology.     

Application Of Organic Geochemistry To Detect Signatures Of Organic Matter In The Haughton Impact Structure

Abstract— Organic geochemistry applied to samples of bedrock and surface sediment from the Haughton impact structure detects a range of signatures representing the impact event and the transfer of organic matter from the crater bedrock to its erosion products. The bedrock dolomite contains hydrocarbon‐bearing fluid inclusions which were incorporated before the impact event. Comparison of biomarker data from the hydrocarbons in samples inside and outside of the crater show the thermal signature of an impact. The occurrence of hydrocarbon inclusions in hydrothermal mineral samples shows that organic matter was mobilized and migrated in the immediate aftermath of the impact. The hydrocarbon signature was then transferred from bedrock to the crater‐fill lacustrine deposits and present‐day sediments in the crater, including wind‐blown detritus in snow/ice. Separate signatures are detected from modern microbial life in crater rock and sediment samples. Signatures in Haughton crater samples are readily detectable because they include hydrocarbons generated by the burial of organic matter. This type of organic matter is not expected in crater samples on other planets, but the Haughton data show that, using very high resolution detection of organic compounds, any signature of primitive life in the crater rocks could be transferred to surface detritus and so extend the sampling medium.     

Morphology of lunar craters: A test of lunar erosional models

This paper is a test of published theoretical and experimental studies of crater erosion by micrometeorite bombardment which predict systematic variations in the morphology of lunar craters as a function of crater diameter and crater age. Numerical, ranking-type degradation classifications indicate that the craters on Mare Imbrium and Mare Tranquillitatus confirm these predictions by showing a systematic increase in degradation with decreasing diameter for craters smaller than a few kilometers in diameter but larger than the equilibrium diameter, and by showing fixed proportions of fresh, moderately degraded and very degraded craters under equilibrium conditions. Furthermore, the relative ages of the two mare surfaces may be determined using a diameter/mean-degradation-number curve. These determinations of relative age and process of crater erosion are both essentially independent of the traditionally studied crater diameter/frequency relationships. Morphologies of terra craters near Mare Humorum suggest a young, non-equilibrium crater population superposed on a perimordial population with about equilibrium proportions of fresh, moderately degraded and very degraded craters. The primordial population has been modified by pre-Imbrian or early Imbrian deposition of blanketing deposits. A comparative study of several crater degradation classifications indicates that all are essentially interchangeable.     

Theoretical analysis of secondary cratering on Mars and an image-based study on the Cerberus Plains

The issue of crater retention age estimates on planetary surfaces is discussed with an attempt to quantify the effect of overlapping primary and secondary impact crater populations in restricted crater diameter ranges. The approach to this problem is illustrated with a simple model production function where the secondary crater input is artificially enhanced. Extrapolation of such a secondary crater model distribution to a global record results in extraordinarily high crater frequencies that do not exist on Mars, and implies the need of detailed studies of the size-frequency distribution for remote secondary craters, to date poorly known. A key case, the martian crater Zunil and its secondary crater field, illustrate that reasonable predictions for the secondary crater size-frequency distribution at small (<100 m) crater diameters affected the standard model crater retention age for the Cerberus plains less than the statistical uncertainty. These observations show that age determination based on appropriate crater counting statistics is valid in a wide primary crater diameter range.     

Malvinas (Falkland) Plateau structure versus Mjølnir crater: Geophysical workflow template for proposed marine impact craters

A diagnostic geophysical‐based template, supported by modelling, is suggested to be used prior to, or in combination with geological/drilling data, when proposing a marine impact crater. The latter refers to impacts occurring in a marine setting and resulting in structures that are currently partially or totally underwater. The methodology is based on the well‐documented Mjølnir crater in the Barents Sea. The template has been developed in conjunction with the recently proposed and debated impact crater on the Malvinas (Falkland) Plateau in the South Atlantic. Despite their different sizes, their comparison adds to the ambiguous nature of the Malvinas structure and shows that the integrated analysis of seismic and potential field data and modelling is crucial for any interpretation of a marine impact crater without relevant geological information. The proposed workflow template utilizes all available geophysical data and is composed of a series of iterative steps, including a range of alternative nonimpact interpretations that must be discussed and accounted for. Subsequently, further iterative geophysical modelling is required to support and decipher the impact related processes. A more complex impact crater model and additional impact crater features can be resolved by physical property modelling. In all cases, a close spatial correspondence of the defined impact structure with potential field anomalies is a necessity to establish a causal relationship. We suggest that the diagnostic workflow template provides a methodology to be applied to future studies of the Malvinas structure, as well as to proposed marine (and, with minor adaptions, to nonmarine) impact craters in general.     

An appraisal of the Serra da Cangalha impact structure using the Euler deconvolution method

Abstract— The applicability of the Euler deconvolution method in imaging impact crater structure vis‐à‐vis delineation of source depth of the circular magnetic anomaly and/or basement depth beneath the crater is addressed in this paper. The efficacy of the method has been evaluated using the aeromagnetic data obtained over the Serra da Cangalha impact crater, northeastern Brazil. The analyses of the data have provided characteristic Euler deconvolution signatures and structural indices associated with impact craters. Also, through the interpretation of the computed Euler solutions, our understanding of the structural features present around the impact structure has been enhanced. The Euler solutions obtained indicate shallow magnetic sources that are interpreted as possibly post‐impact faults and a circular structure. The depth of these magnetic sources varies between 0.8 and 2.5 km, while the Precambrian basement depth was found at ?1.5 km. This is in good agreement with the estimates of the Precambrian basement depth of about 1.1 km, calculated using aeromagnetic data. The reliability of the depth solutions obtained through the implementation of the Euler method was confirmed through the use of the existing information available in the area and the result of previous studies. We find that the Euler depth solutions obtained in this study are consistent with the results obtained using other methods.     

Lunar microcraters: Implications for the micrometeoroid complex

The contributions of lunar microcrater studies to understand the overall micrometeoroid environment are summarized and compared to satellite data.In comparison with small-scale laboratory studies, most lunar crater morphologies are compatible only with impact velocities > 3·5 km/sec and projectile densities between 1–8 g/cm³; a mean value is most likely 2–4 g/cm³. The particles arenon-porous and fairly equi-dimensional; needles, platelets, rods, whiskers and other highly asymmetric particle shapes can be excluded. Data on projectile chemistry is sparse and non-diagnostic at present.The crater diameters are converted into projectile masses via small scale laboratory impact experiments. Accordingly, the observed span of crater pit diameters (0·1 μm–1 cm) corresponds to a particle mass range of ≈ 10^?15–10^?3 g. This large, dynamic detection range is a unique feature of the lunar rock detector. Absolute crater densities on different rocks vary from “production” to “equilibrium” conditions. After normalization of such densities, relative microcrater size frequencies are obtained to deduce a mass frequency distribution for particles 10^?15–10^?3 g. There is evidence that this distribution is bimodal. A radiation pressure cutoff at 10^?12 g particle mass does not exist. The micrometeoroid flux obtained from lunar rocks is compatible with satellite data. There is indication that the micrometeoroid flux may have been lower in the past. Some speculative astronomical consequences concerning the origin of micrometeoroids are discussed.     

Measuring impact crater depth throughout the solar system

One important, almost ubiquitous, tool for understanding the surfaces of solid bodies throughout the solar system is the study of impact craters. While measuring a distribution of crater diameters and locations is an important tool for a wide variety of studies, so too is measuring a crater's “depth.” Depth can inform numerous studies including the strength of a surface and modification rates in the local environment. There is, however, no standard data set, definition, or technique to perform this data-gathering task, and the abundance of different definitions of “depth” and methods for estimating that quantity can lead to misunderstandings in and of the literature. In this review, we describe a wide variety of data sets and methods to analyze those data sets that have been, are currently, or could be used to derive different types of crater depth measurements. We also recommend certain nomenclature in doing so to help standardize practice in the field. We present a review section of all crater depths that have been published on different solar system bodies which shows how the field has evolved through time and how some common assumptions might not be wholly accurate. We conclude with several recommendations for researchers which could help different data sets to be more easily understood and compared.     

Bosumtwi impact structure,Ghana: Evidence for fluidized emplacement of the ejecta

The about 10.5 km diameter Bosumtwi impact crater is one of the youngest large impact structures on Earth. The crater rim is readily noticed on topographic maps or in satellite imagery. It defines a circular basin filled by water (Lake Bosumtwi) and lacustrine sediments. The morphology of this impact structure is also characterized by a circular plateau extending beyond the rim and up to 9–10 km from the center of the crater (about 2 crater radii). This feature comprises a shallow ring depression, also described as an annular moat, and a subdued circular ridge at its outer edge. The origin of this outermost feature could so far not be elucidated based on remote sensing data only. Our approach combines detailed topographic analysis, including roughness mapping, with airborne radiometric surveys (mapping near‐surface K, Th, U concentrations) and field observations. This provides evidence that the moat and outer ring are features inherited from the impact event and represent the partially eroded ejecta layer of the Bosumtwi impact structure. The characteristics of the outer ridge indicate that ejecta emplacement was not purely ballistic but requires ejecta fluidization and surface flow. The setting of Bosumtwi ejecta can therefore be considered as a terrestrial analog for rampart craters, which are common on Mars and Venus, and also found on icy bodies of the outer solar system (e.g., Ganymede, Europa, Dione, Tethys, and Charon). Future studies at Bosumtwi may therefore help to elucidate the mechanism of formation of rampart craters.     

Remote sensing of terrestrial impact craters: The TanDEM‐X digital elevation model

With the TanDEM‐X digital elevation model (DEM), the terrestrial solid surface is globally mapped with unprecedented accuracy. TanDEM‐X is a German X‐band radar mission whose two identical satellites have been operated in single‐pass interferometer configuration over several years. The acquired data are processed to yield a global DEM with 12 m independent posting and relative vertical accuracies of better than 2 m and 4 m in moderate and mountainous terrain, respectively. This DEM provides new opportunities for space‐borne remote‐sensing studies of the entire sample of terrestrial impact craters. In addition, it represents an interesting repository to aid in the search for new impact crater candidates. We have used the TanDEM‐X DEM to investigate the current set of confirmed impact structures. For a subsample of the craters, including small, midsized, and large structures, we compared the results with those from other DEMs. This quantitative analysis demonstrates the excellent quality of the TanDEM‐X elevation data. Our findings help to estimate what can be gained by using the TanDEM‐X DEM in impact crater studies. They may also be beneficial in identifying the regions and morphologies where the search for currently unknown impact structures might be most promising.     

Micron‐scale hypervelocity impact craters: Dependence of crater ellipticity and rim morphology on impact trajectory,projectile size,velocity, and shape

The interstellar collector on NASA's Stardust mission captured many particles from sources other than the interstellar dust stream. Impact trajectory may provide a means of discriminating between these different sources, and thus identifying/eliminating candidate interstellar particles. The collector's aerogel preserved a clear record of particle impact trajectory from the inclination and direction of the resultant tracks. However, the collector also contained aluminum foils and, although impact crater studies to date suggest only the most inclined impacts (>45° from normal) produce crater morphologies that indicate trajectory (i.e., distinctly elliptical), these studies have been restricted to much larger (mm and above) scales than are relevant for Stardust (μm). It is unknown how oblique impact crater morphology varies as a function of length scale, and therefore how well Stardust craters preserve details of impactor trajectory. Here, we present data from a series of impact experiments, together with complementary hydrocode modeling, that examine how crater morphology changes with impact angles for different‐sized projectiles. We find that, for our smallest spherical projectiles (2 μm diameter), the ellipticity and rim morphology provide evidence of their inclined trajectory from as little as 15° from normal incidence. This is most likely a result of strain rate hardening in the target metal. Further experiments and models find that variation in velocity and impactor shape complicate these trends, but that rim morphology remains useful in determining impact direction (where the angle of impact is >20° from normal) and may help identify candidate interstellar particle craters on the Stardust collector.     

A new method to determine the direction of impact: Asymmetry of concentric impact craters as observed in the field (Lockne), on Mars,in experiments,and simulations

Most impacts occur at an angle with respect to the horizontal plane. This is primarily reflected in the ejecta distribution, but at very low angle structural asymmetries such as elongation of the crater and nonradial development of the central peak become apparent. Unfortunately, impact craters with pristine ejecta layers are rare on Earth and also in areas with strong past or ongoing surface erosion on other planetary bodies, and the structural analysis of central peaks requires good exposures or even on‐site access to outcrop. However, target properties are known to greatly influence the shape of the crater, especially the relatively common target configuration of a weaker layer covering a more rigid basement. One such effect is the formation of concentric craters, i.e., a nested, deeper, inner crater surrounded by a shallow, outer crater. Here, we show that with decreasing impact angle there is a downrange shift of the outer crater with respect to the nested crater. We use a combination of (1) field observation and published 3‐D numerical simulation of one of the best examples of a terrestrial, concentric impact crater formed in a layered target with preserved ejecta layer: the Lockne crater, Sweden; (2) remote sensing data for three pristine, concentric impact craters on Mars with preserved ejecta layers further constraining the direction of impact; as well as (3) laboratory impact experiments, to develop the offset in crater concentricity into a complementary method to determine the direction of impact for layered‐target craters with poorly preserved ejecta layers.     

Crater size-shape profiles for the moon and mercury: Terrain effects and interplanetary comparisons

New crater size-shape data were compiled for 221 fresh lunar craters and 152 youthful mercurian craters. Terraces and central peaks develop initially in fresh craters on the Moon in the 0–10 km diameter interval. Above a diameter of 65 km all craters are terraced and have central peaks. Swirl floor texture is most common in craters in the size range 20–30 km, but it occurs less frequently as terraces become a dominant feature of crater interiors. For the Moon there is a correlation between crater shape and geomorphic terrain type. For example, craters on the maria are more complex in terms of central peak and terrace detail at any given crater diameter than are craters in the highlands. These crater data suggest that there are significant differences in substrate and/or target properties between maria and highlands. Size-shape profiles for Mercury show that central peak and terrace onset is in the 10–20 km diameter interval; all craters are terraced at 65 km, and all have central peaks at 45 km. The crater data for Mercury show no clear cut terrain correlation. Comparison of lunar and mercurian data indicates that both central peaks and terraces are more abundant in craters in the diameter range 5–75 km on Mercury. Differences in crater shape between Mercury and the Moon may be due to differences in planetary gravitational acceleration (gMercury=2.3gMoon). Also differences between Mercury and the Moon in target and substrate and in modal impact velocity may contribute to affect crater shape.     

Global survey of lunar regolith depths from LROC images

We performed the first global survey of lunar regolith depths using Lunar Reconnaissance Orbiter Camera (LROC) data and the crater morphology method for determining regolith depth. We find that on both the lunar farside and in the nearside, non-mare regions, the regolith depth is twice as deep as it is within the lunar maria. Our data compare favorably with previous studies where such data exist. We also find that regolith depth correlates well with density of large craters (>20 km diameter). This result is consistent with the gradual formation of regolith by rock fracture during impact events.     

Hydrocode modeling of the Sierra Madera impact structure

Abstract— We present the first hydrocode simulations of the formation of the Sierra Madera structure (west Texas, USA), which was caused by an impact into a thick sedimentary target sequence. We modeled Sierra Madera using the iSALE hydrocode, and here we present two best‐fit models: 1) a crater with a rim (final crater) diameter of ?12 km, in agreement with previous authors' interpretations of the original structure, and 2) a crater ?16 km in diameter with increased postimpact erosion. Both models fit some of the geologic observational data, but discrepancies with estimates of peak shock pressure, extent of deformation, and stratigraphic displacement remain. This study suggests that Sierra Madera may be a larger crater than previously reported and illustrates some of the challenges in simulating impact deformation of sedimentary lithologies. As many terrestrial craters possess some amount of sedimentary rocks in the target sequence, numerical models of impacts into sedimentary targets are essential to our understanding of target rock deformation and the mechanics of crater formation.