共查询到20条相似文献,搜索用时 15 毫秒
1.
Active faulting, a source of seismic disasters and ground deformation, may be also accompanied with the effects that can result in rapid or slow changes in the environment capable of affecting, either negatively or positively, living conditions of a man and in general evolution of animals and plants. Existing data still rare and uncertain show that these effects may be, first of all, specific fault-related landscapes and various geophysical and geochemical anomalies above and around active fault planes. 相似文献
2.
Active tectonic movements in the northwestern Zagros include right lateral slip at the rate of about 10 mm/a along the Main Recent Fault, which inherits the position of the Main Thrust, now inactive, and active thrusting and accompanying folding distributed between several zones southwest of the Main Recent Fault. In the southeastern Zagros (the Fars Province), there are several right lateral faults that extend N–S obliquely to the overall trend of the Zagros fault-and-fold belt. These may be either branches of the Main Recent Fault, or faults accommodating relative broadening of the outer Zagros in its southeastern segment. The Main Thrust in the southeastern Zagros also remains inactive. The Ipak, North Tehran, and Mosha fault zones and several minor structures in the eastern Alborz form the E–W-trending active fault system with combined reverse and left lateral slip. On the Ipak and Mosha zones, lateral movements with the late Quaternary mean rate exceeding 1 mm/a dominate over vertical fault movements. Together with right lateral faults stretching northeast of Zagros, the faults of the Alborz may accommodate east-directed motion of the Iranian microplate. 相似文献
3.
Fennoscandia, today a region of low to moderately low seismicity, was, at the time of deglaciation, with rates of uplift on the order of tens of centimetres per year, a region of very high seismicity and active tectonics. This is evident both from primary fault structures and from secondary sedimentary and hard rock effects in the region around the epicentral areas. The map of active faults in Fennoscandia includes numerous structures previously not recognised. Despite this, the recording of active faults and paleoseismic events is still in its initial phase. Much more data will surely accumulate in the near future. 相似文献
4.
The active fault database and Map of active faults in Africa, in scale of 1:5,000,000, were compiled according to the ILP Project II-2 “World Map of Major Active Faults”. The data were collected in the Royal Museum of Central Africa, Tervuren, Belgium, and in the Geological Institute, Moscow, where the final edition was carried out. Active faults of Africa form three groups. The first group is represented by thrusts and reverse faults associated with compressed folds in the northwest Africa. They belong to the western part of the Alpine–Central Asian collision belt. The faults disturb only the Earth's crust and some of them do not penetrate deeper than the sedimentary cover. The second group comprises the faults of the Great African rift system. The faults form the known Western and Eastern branches, which are rifts with abnormal mantle below. The deep-seated mantle “hot” anomaly probably relates to the eastern volcanic branch. In the north, it joins with the Aden–Red Sea rift zone. Active faults in Egypt, Libya and Tunis may represent a link between the East African rift system and Pantellerian rift zone in the Mediterranean. The third group included rare faults in the west of Equatorial Africa. The data were scarce, so that most of the faults of this group were identified solely by interpretation of space imageries and seismicity. Some longer faults of the group may continue the transverse faults of the Atlantic and thus can penetrate into the mantle. This seems evident for the Cameron fault line. 相似文献
5.
The active faults known and inferred in the area where the major Pacific, North American and Eurasian plates come together group into two belts. One of them comprises the faults striking roughly parallel to the Pacific ocean margin. The extreme members of the belt are the longitudinal faults of islands arcs, in its oceanic flank, and the faults along the continental margins of marginal seas, in its continental flank. The available data show that all these faults move with some strike-slip component, which is always right-lateral. We suggest that characteristic right-lateral, either partially or dominantly, kinematics of the fault movements has its source in oblique convergence of the Pacific plate with continental Eurasian and North American plates. The second belt of active faults transverses the extreme northeast Asia as a continental extension of the active mid-Arctic spreading ridge. The two active fault belts do not cross but come close to each other at the northern margin of the Sea of Okhotsk marking thus the point where the Pacific, North American and Eurasian plates meet. 相似文献
6.
莺歌海盆地是南海西北部海域地质灾害类型较齐全的地区之一.根据野外调查资料,本文简要地分析了该区的活动断裂和地质灾害类型.区内活动断裂主要走向呈NW向,该方向的活动断裂主要有红河断裂带、中央拗陷东部断裂带和中央拗陷西部断裂带.红河断裂带在地震资料上显示为一倾向SW的正断层,表现为明显的重力梯级带和磁异常分界带,NE向断裂带分布于盆地中部,在重磁异常上表现为明显的异常带,在北部表现为被NW向的断裂切割.莺歌海盆地地质灾害类型主要有地震活动、泥底辟构造、滑坡与崩塌等.同时,还对该区地质灾害基本特征和分布规律进行了初步分析. 相似文献
7.
A map of major active faults has been constructed for the Baikal rift system (BRS). Recent active faults are identified using seismological data. The BRS seismicity of the past 40 years is statistically analyzed. Areas of a “stable” concentration of epicenters are revealed. On this basis, a zone of recent fracturing of the lithosphere is identified and its relation to active and developing faults of the BRS is analyzed. The zone of the lithosphere fracturing is a major tectonic structure, which controls both the recent seismic process and the reactivation of ancient faults. It is demonstrated that the available seismological data can provide a basis for a detailed classification of faults by degree of their tectonic activity. Regularities in the distribution of strong earthquakes along the zone of the recent fracturing of the lithosphere are established, as well as regularities in the distribution of strong and weak seismic events relative to transform and other faults. The degree of the fault reactivation is determined by their spatial closeness to the axial zone of the recent rupturing of the lithosphere. 相似文献
8.
Sanandaj-Sirjan Zone (SaSZ) is one of the most dynamic structural zones of Iran, which is divided into three main parts: Northern, Central and Southern. The northern SaSZ has been affected by deformation due to fault activities near the Zagros suture zone, and mylonitic structures have overprinted these rocks and was affected by three episodes of magma injection during the Permian-Carboniferous, Early Cretaceous and Cenozoic. In this study, the rock units investigated that have been considered Precambrian-Paleozoic basement on geological maps. This paper considers zircon U-Pb dating, whole-rock chemistry and Sr-Nd isotope ratios of Cretaceous magmatic rocks in the N-SaSZ to develop a new geodynamic model for the evolution of these magmatic rocks. The new zircon U-Pb ages obtained in this study show that the magmatic rocks crystallized at 115–107 Ma in the Early Cretaceous (Aptian-Albian) and are much younger than the supposed ages presented on geological maps. This complex classified into two main groups of basic-intermediate and acidic rocks based on SiO 2 contents. The whole-rock chemistry of the basaltic and andesitic rocks, which are interbedded with marine shallow-water sedimentary deposits, shows their typical calc-alkaline affinity and subordinate tholeiitic series on an active margin. The positive ε Nd(t) of approximately +4 for some undifferentiated basalts with negative Ti and Nb anomalies shows the relation of these rocks to calc-alkaline magmatism and was generated by the partial melting of subcontinental lithospheric mantle (SCLM). Granitoid rocks with some affinity to the peraluminous group with a negative ε Nd(t) value (-3.2) mainly and negative Ti and Nb anomalies plot in an active margin tectonic setting. Simultaneous mafic calc-alkaline volcanism and the generation of granitic intrusions in the Early Cretaceous could have occurred on an active margin. Due to the absence of Jurassic arc related magmatic rocks in northern SaSZ and presence of Cretaceous calc alkaline magmatic activity, which are not observed in the central SaSZ, support the idea that the subduction of the Neotethys beneath the northern SaSZ started in the Early Cretaceous. 相似文献
9.
The northern margin of the Tibetan Plateau (NMTP) is a major intracontinental Cenozoic transpressional zone that comprises a series of active strike-slip faults and thrust faults. It is important to document cumulative horizontal displacements along the NMTP in order to understand quantitatively strain partitioning in East Asia since the India–Eurasia collision. Based on an analysis of horizontal slip along major active faults, the total amount of horizontal displacements is estimated up to 700 km between the Tibetan Plateau and the Tarim Basin since the convergence of India and Eurasia. Along the western and middle segment of the Altyn Tagh fault to the northern margin of the Qaidam Basin, there are abundant evidence that show that the net displacement is 400 km since 40–35 Ma, and along the Shulenan Shan and southeast of middle Qilian Shan since 25–17 Ma, the amount of offset is 150 km. The largest horizontal slip in Qilian Shan–Hexi Corridor to the northeast of the Altyn Tagh fault is also 150 km since late Oligocene to early Miocene. It decreases to only 60 km along the Haiyuan fault (since late Miocene) and to 25 km along the Zhongwei–Tongxin fault since the Pliocene (about 5.3–3.4 Ma), at the northeast margin of the Tibetan Plateau. This clearly implies northeastward diminishing of the total horizontal displacement and temporal getting younger of the fault slip along the NMTP. However, this tendency is very complicated at different times and different segments as a result of the uplift, growth and rotation of different segments of the NMTP at different stages during the convergence of India and Eurasia. 相似文献
10.
We have identified a 50-km-long active fault scarp, called herewith the Lourdes Fault, between the city of Lourdes and Arette village in the French Pyrénées. This region was affected by large and moderate earthquakes in 1660 (Io = VIII–IX, MSK 64,), in 1750 (Io = VIII, MSK 64) and in 1967 ( Md = 5.3, Io = VIII, MSK 64). Most earthquakes in this area are shallow and the few available focal mechanism solutions do not indicate a consistent pattern of active deformation. Field investigations in active tectonics indicate an East–West trending and up to 50-m-high fault scarp, in average, made of 3 contiguous linear fault sub-segments. To the north, the fault controls Quaternary basins and shows uplifted and tilted alluvial terraces. Deviated and abandoned stream channels of the southern block are likely due to the successive uplift of the northern block of the fault. Paleoseismic investigations coupled with geomorphic studies, georadar prospecting and trenching along the fault scarp illustrate the cumulative fault movements during the late Holocene. Trenches exhibit shear contacts with flexural slip faulting and thrust ruptures showing deformed alluvial units in buried channels. 14C dating of alluvial and colluvial units indicates a consistent age bracket from two different trenches and shows that the most recent fault movements occurred between 4221 BC and 2918 BC. Fault parameters and paleoseismic results imply that the Lourdes Fault and related sub-segments may produce a MW 6.5 to 7.1 earthquake. Fault parameters imply that the Lourdes Fault segment corresponds to a major seismic source in the western Pyrénées that may generate earthquakes possibly larger than the 1660 historical event. 相似文献
11.
In this paper, preliminary support design of Kaletepe tunnel, located on Bilecik-Istanbul highway, Turkey, was analyzed by empirical and numerical methods. The rock mass rating (RMR) and rock mass quality (Q) systems were employed for empirical rock mass quality determination. Numerical analysis for the stress–strain distribution of the tunnel excavation and support systems was also carried out. The applied support performance was investigated at different sections of the tunnel route. It was seen that empirical and numerical approaches showed similar results. This indicates that when the empirical method is supported by numerical method, the preliminary support design will be more reliable. 相似文献
12.
The Armutlu Peninsula and adjacent areas in NW Turkey play a critical role in tectonic reconstructions of the southern margin of Eurasia in NW Turkey. This region includes an inferred Intra-Pontide oceanic basin that rifted from Eurasia in Early Mesozoic time and closed by Late Cretaceous time. The Armutlu Peninsula is divisible into two metamorphic units. The first, the Armutlu Metamorphics, comprises a ?Precambrian high-grade metamorphic basement, unconformably overlain by a ?Palaeozoic low-grade, mixed siliciclastic/carbonate/volcanogenic succession, including bimodal volcanics of inferred extensional origin, with a possibly inherited subduction signature. The second unit, the low-grade
znik Metamorphics, is interpreted as a Triassic rift infilled with terrigenous, calcareous and volcanogenic lithologies, including basalts of within-plate type. The Triassic rift was unconformably overlain by a subsiding Jurassic–Late Cretaceous (Cenomanian) passive margin including siliciclastic/carbonate turbidites, radiolarian cherts and manganese deposits. The margin later collapsed to form a flexural foredeep associated with the emplacement of ophiolitic rocks in Turonian time. Geochemical evidence from meta-basalt blocks within ophiolite-derived melange suggests a supra-subduction zone origin for the ophiolite. The above major tectonic units of the Armutlu Peninsula were sealed by a Maastrichtian unconformity. Comparative evidence comes from the separate Almacık Flake further east.Considering alternatives, it is concluded that a Mesozoic Intra-Pontide oceanic basin separated Eurasia from a Sakarya microcontinent, with a wider Northern Neotethys to the south. Lateral displacement of exotic terranes along the south-Eurasian continental margin probably also played a role, e.g. during Late Cretaceous suturing, in addition to overthrusting. 相似文献
13.
Central Anatolia exhibits good examples of calc-alkaline and alkaline magmatism of similar age in a collision-related tectonic setting (continent–island arc collision). In the Central Anatolia region, late Cretaceous post-collisional plutonic rocks intrude Palaeozoic–Mesozoic metamorphic rocks overthrust by Upper Cretaceous ophiolitic units to make up the Central Anatolian Crystalline Complex. In the complex, three different intrusive rock types may be recognised based on their geochemical characteristics: (i) calc-alkaline (Behrekdag, Cefalikdag, and Celebi); (ii) subalkaline-transitional (Baranadag); and (ii) alkaline (Hamit). The calc-alkaline and subalkaline plutonic rocks are metaluminous I-type plutons ranging from monzodiorite to granite. The alkaline plutonic rocks are metaluminous to peralkaline plutons, predominantly A-type, ranging from nepheline monzosyenite to quartz syenite. All intrusive rocks show enrichment in LILE and LREE relative to HFSE, and have high 87Sr/86Sr and low 143Nd/144Nd ratios. These characteristics indicate an enriched mantle source region(s) carrying a subduction component inherited from pre-collision subduction events. The tectonic discrimination diagram of Rb vs. (Y+Nb) suggests that the calc-alkaline, subalkaline, and alkaline plutonic rocks have been affected by crustal assimilation combined with fractional crystallisation processes. The coexistence of calc-alkaline and alkaline magmatism in the Central Anatolian Crystalline Complex may be attributed to mantle source heterogeneity before collision. The former carries a smaller intraplate component and pre-subduction enrichment compared to the latter. Either thermal perturbation of the metasomatised lithosphere by delamination of the thermal boundary layer (TBL), or removal of a subducted plate (slab breakoff) is the likely mechanism for the initiation of the post-collisional magmatism in the Complex. 相似文献
14.
This study aimed to identify displacement properties of landslide masses at the initiation of failure and factors that affect the landslides activities in areas where quick clay is found. We set up a research site in a quick clay deposit area in Norway and monitored the displacements of landslide masses and meteorological and hydrological factors for a long period of time using an automatic monitoring system. The system collected data for two landslides that occurred at the site from the start of their movement until their ultimate collapse. The two landslides that were monitored showed definite secondary and tertiary creep stages before they collapsed. One of the landslides moved from the secondary stage to the tertiary creep stage when another landslide occurred nearby. The tertiary stage of this landslide showed reconstruction of short primary, secondary, and tertiary creep stages. These phenomena suggested that (1) the stress at the end of the landslide mass was released during the nearby landslide, and (2) a new stress distribution was formed in the landslide mass. The critical strain differed for 14 times between the two landslide masses we monitored. The difference was likely attributable to the difference in the contents of quick clay, which shows small critical stress against slope failure, as well as topological factors. Our analyses of the effects of hydrological and meteorological factors on landslides showed that the precipitation of 3 and 10 days before six slope failures as the final stages of the landslides that had occurred in the research area was no different from the mean precipitation of periods that showed no slope failure, suggesting that precipitation had no direct effects on the collapse of the landslide masses. On the other hand, the traveling velocities of the landslide masses during the secondary creep stage, which was prior to their collapse, were affected by the water content of the soil and precipitation (and the amount of snowmelt water), but was little correlated with the pore-water pressure of the quick clay layer. We also found that the presence of snow cover scarcely affected landslide movements. 相似文献
15.
Sand- and gravel-filled clastic dikes of seismic liquefaction origin occur throughout much of southern Indiana and Illinois. Nearly all of these dikes originated from prehistoric earthquakes centered in the study area. In this area at least seven and probably eight strong prehistoric earthquakes have been documented as occurring during the Holocene, and at least one during the latest Pleistocene. The recognition of different earthquakes has been based mainly on timing of liquefaction in combination with the regional pattern of liquefaction effects, but some have been recognized only by geotechnical testing at sites of liquefaction. Most paleo-earthquakes presently recognized lie in Indiana, but equally as many may have occurred in Illinois. Studies in Illinois have not yet narrowly bracketed the age of clastic dikes at many sites, which sometimes causes uncertainty in defining the causative earthquake, but even in Illinois the largest paleo-earthquakes probably have been identified. Prehistoric magnitudes were probably as high as about moment magnitude M 7.5. This greatly exceeds the largest historic earthquake of M 5.5 centered in Indiana or Illinois. The strongest paleo-earthquakes struck in the vicinity of the concentration of strongest historic seismicity. Elsewhere, paleo-earthquakes on the order of M 6–7 have occurred even where there has been little or no historic seismicity. Both geologic and geotechnical methods of analysis have been essential for verification of seismic origin for the dikes and for back-calculating prehistoric magnitudes. Methods developed largely as part of this study should be of great value in unraveling the paleoseismic record elsewhere. 相似文献
16.
To determine periods of incremental landslide movement and their possible relationship to regional seismic events, the tree-ring records of 32 tilted and damaged conifers at three sites on landslides in the Gravelly Range of southwestern Montana were examined. Several signs of disturbance in the tree-ring record indicating landslide movement were observed. Commonly, the tree-ring record displayed a marked reduction in annual ring width and/or the reaction wood formation. The tree-ring records from the three landslide sites indicate multiple periods of movement during the 20th century. Many of the periods of movement indicated by the strongest signals (most trees) at the sites occurred the year following significant earthquakes in the region. Those seismic events for which evidence in the tree-ring record was found at one or more of the three sites are the 1983 Borah Peak, 1959 Hebgen Lake, 1935 Helena, 1925 Clarkson, and 1908 Virginia City earthquakes. This study suggests that many of the landslide movements were triggered by, or are coincident with, earthquakes as much as 200 km from the study area. 相似文献
17.
We present a series of high-resolution seismic reflection lines across the Yizre'el valley, which is the largest active depression in Israel, off the main trend of the Dead Sea rift. The new seismic reflection data is of excellent quality and shows that the valley is dissected into numerous small blocks, separated by active faults. The Yizre'el valley is found to consist of a series of half grabens, rather than a single half graben, or a symmetrical graben. The faults are generally vertical and appear to have a dominant strike-slip component, but some dip-slip is also evident. A marked zone of compression near Megido is associated with the intersection of the two largest faults in the valley, the Carmel fault and the Gideon fault. Variable trend of the faults reflects the complexity of the local geology along the boundary between the wide NW–SE trending Farah–Carmel fault zone and the E–W trending basins and ranges in the Lower Galilee. This tectonic complexity is likely to result from a highly variable stress pattern, modified by the structures inside it. Normal faulting in the valley occurred at an early stage of its development as a tectonic depression. However, strike-slip motion on the Carmel fault, and possibly also on some of the other faults, appears to have started together with the onset of normal faulting. Earthquake hazard in the area appears to be uniform as faults are distributed throughout the Yizre'el valley. 相似文献
18.
Post-glacial tectonic faults in the eastern Swiss Alps occur as single lineaments, clusters of faults or extensive fault zones consisting of several individual faults aligned along the same trend. The orientation of the faults reflects the underlying lithology and the pre-existing structures (joints, pervasive foliations) within these lithologies. Most post-glacially formed faults in the area around Chur, which undergoes active surface uplift of 1.6 mm/year, trend E–W and cut across Alpine and glacial features such as active screes and moraines. Additionally, there are NNW and ENE striking faults reactivating pervasive Alpine foliations and shear zones. Based on a comparison with the nodal planes of recent earthquakes, E–W striking faults are interpreted as active faults. Because of very short rupture lengths and mismatches of fault location with earthquake distribution, magnitude and abundance, the faults are considered to be secondary faults due to earthquake shaking, cumulative deformation in post- or interseismic periods or creep, and not primary earthquake-related faults. The maximum of recent surface uplift rates coincides with the youngest cooling of the rocks according to apatite fission-track data and is therefore a long-lived feature that extends well into pre-glacial times. Isostatic rebound owing to overthickened crust or to melting of glacial overburden cannot explain the observed surface uplift pattern. Rather, the faults, earthquakes and surface uplift patterns suggest that the Alps are deforming under active compression and that the Aar massif basement uplift is still active in response to ongoing collision. 相似文献
19.
A strongly deformed and metamorphosed Triassic oceanic seamount(s) and plateau succession extends as an east–west belt for 1100 km along the Pontides of northern Turkey. This succession, known widely as the Nilüfer unit, consists mainly of metabasic lava and tuff–marble–phyllite association including tectonic slices of ultramafic rock and gabbro. According to the conodont findings the unit formed during the Early to Mid-Triassic, and the isotopic age data indicate that it underwent high-pressure greenschist facies metamorphism during the latest Triassic period. The metavolcanic rocks form over 80% of the sequence. The Nilüfer unit covers an area of 120,000 km 2, with the volume of mafic lava estimated as 2×10 5 km 3. Such a huge volcanic pile has erupted rapidly in a relatively short period during the Early to Mid-Triassic (approx. 10 Ma). Hypotheses for the origin of the Nilüfer unit include a ‘seamount’, ‘intra-arc and/or fore-arc basin’, ‘oceanic plateau’, and ‘Early Triassic rift’. The geochemistry of metabasites and that of relict magmatic clinopyroxenes indicate that there are two main mafic rock groups in the Nilüfer unit displaying tholeiitic and alkaline affinities. No metabasite and clinopyroxene sample display typical orogenic basalt affinity or a subduction signature. Geochemical data obtained in this study are consistent with the derivation of the metabasites from the topmost extrusive layers of an oceanic plateau (LIP) together with the volcanic rocks of seamount(s). 相似文献
20.
This study defines the Mio-Pliocene to present-day stress regime acting at the northeastern corner of the eastern Mediterranean region along the Karasu Valley (i.e., the Amanos Range), taking in the Antakya, Osmaniye and Kahramanmaras provinces. The inversion slip vectors measured on fault planes and chronologies between striations indicate that the stress regime varied from transpressional initially to transtensional, having consistent NW- and NE-trending σHmax ( σ1) and σHmin ( σ3) axes, respectively; there are significantly different mean stress-ratio ( Rm) values however. The older mean stress state is characterized by N151±11°E-trending σ1 and N59±12°E-trending σ3 axes, and by a mean arithmetic Rm value of 0.76, indicating that the regional stress regime is transpressional. The younger stress regime is characterized by N154±8°E-trending σ1 and N243±8°E-trending σ3 axes, and by a mean arithmetic Rm value of 0.17, indicating a transtensional character for this regional stress regime. The low R values of the stress deviators related to the recent stress state reflect normal-component slips. The earthquake focal mechanism inversions confirm that the younger stress regime continues into the Recent. The inversion identifies a transtensional stress regime representing strike-slip and an extensional stress state with a consistent NE-trending σHmin ( σ3) axis. These stress states are characterized by N66°E and N249°E-trending σ3 axes, respectively. Both significant regional stress regimes induce left-lateral displacement along the southern part of the East Anatolian Fault (EAF, or Amanos Fault). The temporal change, probably in Quaternary time, within the regional stress regime—from transpression to transtension—resulted from the coeval influences of subduction processes in the west–southwest (i.e., along the Cyprus arc), continental collision in the east, and westward escape of the Anatolian block. 相似文献
|