Origin of ureilites inferred from a SIMS oxygen isotopic and trace element study of clasts in the Dar al Gani 319 polymict ureilite

Secondary ion mass spectrometer (SIMS) oxygen isotope analyses were performed on 24 clasts, representing 9 clast types, in the Dar al Gani (DaG) 319 polymict ureilite with precisions better than 1‰. Olivine-rich clasts with typical ureilitic textures and mineral compositions have oxygen isotopic compositions that are identical to those of the monomict ureilites and plot along the CCAM (Carbonaceous Chondrite Anhydrous Mineral) line. Other igneous clasts, including plagioclase-bearing clasts, also plot along the CCAM line, indicating that they were derived from the ureilite parent body (UPB). Thus, we suggest that some of the plagioclase-bearing clasts in the polymict ureilites represent the “missing basaltic component” produced by partial melting on the UPB.Trace element concentrations (Mg, K, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Rb, Sr and Ba) in ureilitic plagioclase and glass from 13 clasts were obtained by using the SIMS high mass resolution method. The trace element contents of the plagioclase generally show monotonic variations with anorthite content (mol%) that are consistent with partial melting and fractional crystallization. Incompatible trace element concentrations (K, Ti, and Ba) are low and variable for plagioclase with An > 40, indicating that the parental magmas for some clasts were derived from a depleted source. We performed partial melt modeling for CI and CM precursor compositions and compared the results to the observed trace element (K, Ba, and Sr) abundances in the plagioclase. Our results indicate that (1) the UPB evolved from a alkali-rich carbonaceous chondritic precursor, (2) parent melts of porphyritic clasts could have formed by 5-20% equilibrium partial melting and subsequent fractional crystallization, and (3) parent melts of the incompatible trace element-depleted clasts could be derived from fractional melting, where low degree (<10%) partial melts were repeatedly extracted from their solid sources.Thus, both the oxygen isotopic and trace element compositions of the plagioclase bearing clasts in DaG-319 suggest that the UPB underwent localized low degree-partial melting events. The partial melts could have been repeatedly extracted from the precursor, resulting in the formation of the olivine-pigeonite monomict ureilites as the final residue.     

Feldspathic clast populations in polymict ureilites: Stalking the missing basalts from the ureilite parent body

Polymict ureilites DaG 164/165, DaG 319, DaG 665, and EET 83309 are regolith breccias composed mainly of monomict ureilite-like material, but containing ∼2 vol% of feldspathic components. We characterized 171 feldspathic clasts in these meteorites in terms of texture, mineralogy, and mineral compositions. Based on this characterization we identified three populations of clasts, each of which appears to represent a common igneous (generally basaltic) lithology and whose mafic minerals show a normal igneous fractionation trend of near-constant Fe/Mn ratio over a range of Fe/Mg ratios that extend to much higher values than those in monomict ureilites. The melts represented by these populations are unlikely to be impact melts, because the ubiquitous presence of carbon in polymict ureilites (the regolith of the ureilite parent body) implies that impact melts would have crystallized under conditions of carbon redox control and therefore have highly magnesian mafic mineral compositions with constant Mn/Mg ratio. Therefore, these melts appear to be indigenous products of igneous differentiation on the ureilite parent body (UPB), complementary to the olivine-pigeonite residues represented by the majority of monomict ureilites.The most abundant population is characterized by albitic plagioclase in association with pyroxenes, phosphates, ilmenite, silica, and incompatible-element enriched glass. Model calculations suggest that it formed by extensive fractional crystallization of the earliest melt(s) of precursor materials from which the most magnesian (shallowest) olivine-pigeonite ureilites formed. A less abundant population, characterized by labradoritic plagioclase, may have formed from melts complementary to more ferroan olivine-pigeonite ureilites, and derived from deeper in the UPB. The third population, characterized by the presence of olivine and augite, could only have formed from melts produced at greater depths in the UPB than the olivine-pigeonite ureilites. Many other feldspathic clasts cannot be positively associated with any of these three populations, because their mafic mineral compositions exhibit carbon redox control. However, they may be products of early crystallization of basaltic melts produced on the UPB, before carbon was exhausted by reduction.Partial melting on the ureilite parent body was a fractional (or incremental) process. Melts were produced early in UPB history, and most likely extracted rapidly, thus preserving primitive chemical and oxygen isotopic signatures in the residues.     

The Almahata Sitta polymict breccia and the late accretion of asteroid 2008 TC3

On October 7, 2008, a small asteroid named 2008 TC₃ was detected in space about 19 h prior to its impact on Earth. Numerous world-wide observations of the object while still in space allowed a very precise determination of its impact area: the Nubian Desert of northern Sudan, Africa. The asteroid had a pre-atmospheric diameter of ∼4 m; its weight is reported with values between ∼8 and 83 t, and the bulk density with ∼2–3 g/cm³, translating into a bulk porosity in the range of ∼20–50%. Several dedicated field campaigns in the predicted strewn field resulted in the recovery of more than 700 (monolithological) meteorite fragments with a total weight of ∼10.5 kg. These meteorites were collectively named “Almahata Sitta”, after the nearby train station 6, and initially classified as an anomalous polymict ureilite. Further work, however, showed that Almahata Sitta is not only a ureilite but a complex polymict breccia containing chemically and texturally highly variable meteorite fragments, including different ureilites, a ureilite-related andesite, metal-sulfide assemblages related to ureilites, and various chondrite classes (enstatite, ordinary, carbonaceous, Rumuruti-like). It was shown that that chondrites and ureilites derive from one parent body, i.e., asteroid 2008 TC₃, making this object, in combination with the remotely sensed physical parameters, a loosely aggregated, rubble-pile-like object. Detailed examinations have been conducted and mineral-chemical data for 110 samples have been collected, but more work on the remaining samples is mandatory.     

Osmium isotope systematics of ureilites

The ¹⁸⁷Os/¹⁸⁸Os for 22 ureilite whole rock samples, including monomict, augite-bearing, and polymict lithologies, were examined in order to constrain the provenance and subsequent magmatic processing of the ureilite parent body (or bodies). The Re/Os ratios of most ureilites show evidence for a recent disturbance, probably related to Re mobility during weathering, and no meaningful chronological information can be extracted from the present data set. The ureilite ¹⁸⁷Os/¹⁸⁸Os ratios span a range from 0.11739 to 0.13018, with an average of 0.1258 ± 0.0023 (1σ), similar to typical carbonaceous chondrites, and distinct from ordinary or enstatite chondrites. The similar mean of ¹⁸⁷Os/¹⁸⁸Os measured for the ureilites and carbonaceous chondrites suggests that the ureilite parent body probably formed within the same region of the solar nebula as carbonaceous chondrites. From the narrow range of the ¹⁸⁷Os/¹⁸⁸Os distribution in ureilite meteorites it is further concluded that Re was not significantly fractionated from Os during planetary differentiation and was not lost along with the missing ureilitic melt component. The lack of large Re/Os fractionations requires that Re/Os partitioning was controlled by a metal phase, and thus metal had to be stable throughout the interval of magmatic processing on the ureilite parent body.     

Ureilitic breccias: clues to the petrologic structure and impact disruption of the ureilite parent asteroid

The majority of the 143 ureilite meteorites are monomict (unbrecciated) ultramafic rocks, which represent the mantle (olivine+low-Ca pyroxene residues and less abundant cumulates) of a partially melted (25–30%), carbon-rich asteroid 125 km in radius. Accumulated petrologic and geochemical studies of these meteorites have led to a picture of a ureilite parent body (UPB) that was stratified in mg#, pyroxene abundance and pyroxene type, due to the pressure dependence of carbon redox control, and which preserved a pre-magmatic heterogeneity in Δ¹⁷O. The absence, however, of ureilitic crustal rocks (i.e. basalts) in the meteorite record, leads to significant gaps in our knowledge of the geologic history of the UPB.

Ureilitic breccias provide considerable information that cannot be obtained from the monomict samples, and help to fill in those gaps. Fourteen ureilites are polymict breccias (at least three of which contain solar wind gases) that formed in a regolith. They contain a variety of clast types representing indigenous ureilitic lithologies not known among the monomict samples, as well as several types of non-indigenous impactor materials. In addition, one ureilite (FRO 93008) is a dimict breccia, consisting of two ultramafic lithologies that could not have formed in close proximity on the UPB.

Several feldspathic lithologies representing melts complementary to the monomict ureilite residues or cumulates have been recognized in polymict ureilites. From these lithologies we infer that melt extraction on the UPB was a rapid, fractional process in which trace element and oxygen isotopic equilibrium was not achieved. The majority of melts that reached the surface erupted explosively (due to high contents of CO/CO₂) and were lost into space. Thus, it is likely that the UPB never had an extensive basaltic crust. Melts generated at the shallowest depths and late fractionates, in which carbon had largely been consumed by reduction, were the most likely to have been preserved. Our sample of the UPB is limited to depths equivalent to 100 bars pressure or less, but minor augite-bearing feldspathic lithologies and related cumulates may represent melts derived from deeper.

In addition, we infer that the UPB was catastrophically disrupted, while still hot, by an impacting projectile. Meter-sized ejecta from this impact reaccreted into one or more daughter bodies, on which the brecciated ureilites formed. Ureilite meteorites are derived from these offspring, rather than from the UPB. The remnant of the original UPB may consist largely of olivine plus augite, and thus not resemble the majority of ureilites.     

The origin of iron silicides in ureilite meteorites

Ureilite meteorites contain iron silicide minerals including suessite (Fe,Ni)₃Si, hapkeite (Fe₂Si) and xifengite (Fe₅Si₃). Despite occurring mostly in brecciated varieties presumed to be derived from the regolith of the ureilite parent asteroid, suessite has also been confirmed in one lithology of a dimict ureilite (NWA 1241). In contrast, Si-bearing Fe-metals occur in both brecciated and unbrecciated ureilites, implying that they were formed throughout the ureilite parent asteroid. We examined major, minor and trace element data of Fe-metals in seven brecciated ureilites (DaG 319, DaG 999, DaG 1000, DaG 1023, DaG 1047, EET 83309, and EET 87720) in addition to the dimict ureilite NWA 1241.In this study we show that the silicides and Si-bearing metals in ureilites have similar siderophile trace element patterns; therefore, the precursors to the silicides were indigenous to the ureilite parent body. Si-free kamacite grains in brecciated ureilites show flatter, more chondritic siderophile element patterns. They may also be derived from the interior of the ureilite parent body, but some may be of exogenous origin (impactor debris), as are rare taenite grains.On Earth, iron silicides are often formed under high-temperature and strongly reducing conditions (e.g. blast furnaces, lightning strikes). On the Moon, hapkeite (Fe₂Si) and other silicides have been found in the regolith where they were formed by impact-induced space weathering. In the Stardust aerogel, iron silicides derived from comet Wild2 were also formed by an impact-related reduction process. Silicides in ureilite regolith breccias may have formed by similar processes but ureilites additionally contain abundant elemental carbon which probably acted as a reducing agent, thus larger and more abundant silicide grains were formed than in the lunar regolith or cometary material. The origin of suessite in NWA 1241 may be analogous to that of reduced lithologies in the terrestrial mantle, although a regolith origin may also be possible since this sample is shown here to be a dimict breccia.     

Thermal evolution and physics of melt extraction on the ureilite parent body

We develop a physical model of the thermal history of the ureilite parent body (UPB) that numerically tracks the history of its heating, hydration, dehydration, partial melting and smelting as a function of its formation time and the initial values of its composition, formation temperature and water ice content. Petrologic and chemical data from the main group (non-polymict) ureilite meteorites, which sample the interior of the UPB between depths corresponding to pressures in the range 3-10 MPa, are used to constrain the model. We find that to achieve the ∼30% melting inferred for ureilites from all sampled depths, the UPB must have had a radius between ∼80 and ∼130 km and must have accreted about 0.55 Ma after CAI formation. Melting began in the body at ∼1 Ma after CAI, and the time at which 30% melting was reached varied with depth in the asteroid but was always between ∼4.5 and ∼5.8 Ma after CAI. The total rate at which melt was produced in the UPB varied from more than 100 m³ s⁻¹ in the very early stages of melting at ∼1 Ma after CAI to ∼5 m³ s⁻¹ between 2 and 3 Ma after CAI, decreasing to extremely small values as the end of melting was approached beyond ∼5 Ma. Although the initial period of high melt production occupied only a short time around 1 Ma after CAI, it corresponded to ∼half (16%) of total silicate melting, and all strictly basaltic (i.e. plagioclase-saturated) melts must have been produced during this period.A very efficient melt transport network, consisting of a hierarchy of veins and larger pathways (dikes), developed quickly at the start of melting, ensuring rapid (timescales of months) transport of any single parcel of melt to shallow levels, thus ensuring that chemical interaction between melts and the rocks through which they subsequently passed was negligible. Volatile (mainly carbon monoxide) production due to smelting began at the start of silicate melting in the shallowest parts of the UPB and at later times at greater depths. Except at the very start and very end of melting, the volatile content of the melts produced was always high - generally between 15 and 35 mass % - and most of the melt produced was erupted at the surface of the UPB with speeds well in excess of the escape velocity and was lost into space. However, we show that 30% melting at the 3 MPa pressure level was only possible if ∼15% of the total melt produced in the asteroid was retained as a small number (∼5) of very extensive, sill-like intrusions centered at a depth of ∼7 km below the surface, near the base of the ∼8 km thick outer crust of the asteroid that was maintained at temperatures below the basalt solidus by conductive heat loss to the surface. The horizontal extents of these sills occupied about 75% of the surface area of the UPB, and the sills acted as buffers between the steady supply of melt from depth and the intermittent explosive eruption of the melt into space. We infer that samples from these intrusions are preserved as the rare feldspathic (loosely basaltic) clasts in polymict ureilites, and show that the cooling histories of the sills are consistent with these clasts reaching isotopic closure at ∼5 Ma after CAI, as given by ²⁶Al-²⁶Mg, ⁵³Mn-⁵³Cr and Pb-Pb age dates.     

Nitrogen components in ureilites

Abundances and isotopic compositions of nitrogen and argon have been investigated in bulk samples as well as in acid-resistant C-rich residues of a suite of ureilites consisting of six monomict (Haverö, Kenna, Lahrauli, ALH81101, ALH82130, LEW85328), three polymict (Nilpena, EET87720, EET83309), and the diamond-free ureilite ALH78019. Nitrogen in bulk ureilites varies from 6.3 ppm (in ALH 78019) to ∼55 ppm (in ALH82130), whereas C-rich acid residues have ∼65 to ∼530 ppm N, showing approximately an order of magnitude enrichment, compared with the bulk ureilites, somewhat less than trapped noble gases. Unlike trapped noble gases that show uniform isotopic composition, nitrogen shows a wide variation in δ¹⁵N values within a given ureilite as well as among different ureilites. The variations observed in δ¹⁵N among the ureilites studied here suggest the presence of at least five nitrogen components. The characteristics of these five N components and their carrier phases have been identified through their release temperature during pyrolysis and combustion, their association with trapped noble gases, and their carbon (monitored as CO + CO₂ generated during combustion). Carrier phases are as follows: 1) Amorphous C, as found in diamond-free ureilite ALH78019, combusting at ≤500°C, with δ¹⁵N = -21‰ and accompanied by trapped noble gases. Amorphous C in all diamond-bearing ureilites has evolved from this primary component through almost complete loss of noble gases, but only partial N loss, leading to variable enrichments in ¹⁵N. 2) Amorphous C as found in EET83309, with similar release characteristics as component 1, δ¹⁵N ≥ 50‰ and associated with trapped noble gases. 3) Graphite, as clearly seen in ALH78019, combusting at ≥700°C, δ¹⁵N ≥ 19‰ and devoid of noble gases. 4) Diamond, combusting at 600-800°C, δ¹⁵N ≤ -100‰ and accompanied by trapped noble gases. 5) Acid-soluble phases (silicates and metal) as inferred from mass balance are expected to contain a large proportion of nitrogen (18 to 75%) with δ¹⁵N in the range -25‰ to 600‰. Each of the ureilites contains at least three N components carried by acid-resistant C phases (amorphous C of type 1 or 2, graphite, and diamond) and one acid-soluble phase in different proportions, resulting in the observed heterogeneity in δ¹⁵N. In addition to these five widespread components, EET83309 needs an additional sixth N component carried by a C phase, combusting at <700°C, with δ¹⁵N ≥ 153‰ and accompanied by noble gases. It could be either noble gas-bearing graphite or more likely cohenite. Some excursions in the δ¹⁵N release patterns of polymict ureilites are suggestive of contributions from foreign clasts that might be present in them.Nitrogen isotopic systematics of EET83309 clearly confirm the absence of diamond in this polymict ureilite, whereas the presence of diamond is clearly indicated for ALH82130. Amorphous C in ALH78019 exhibits close similarities to phase Q of chondrites.The uniform δ¹⁵N value of −113 ± 13 ‰ for diamond from both monomict and polymict ureilites and its independence from bulk ureilite δ¹⁵N, Δ¹⁷O, and %Fo clearly suggest that the occurrence of diamond in ureilites is not a consequence of parent body-related process. The large differences between the δ¹⁵N of diamond and other C phases among ureilites do not favor in situ shock conversion of graphite or amorphous C into diamond. A nebular origin for diamond as well as the other C phases is most favored by these data. Also the preservation of the nitrogen isotopic heterogeneity among the carbon phases and the silicates will be more consistent with ureilite formation models akin to “nebular sedimentation” than to “magmatic” type.     

Experimental constraints on ureilite petrogenesis

This experimental study explores the petrogenesis of ureilites by a partial melting/smelting process. Experiments have been performed over temperature (1150-1280 °C), pressure (5-12.5 MPa), and low oxygen fugacity (graphite-CO gas) conditions appropriate for a hypothetical ureilite parent body ∼200 km in size. Experimental and modeling results indicate that a partial melting/smelting model of ureilite petrogenesis can explain many of the unique characteristics displayed by this meteorite group. Compositional information preserved in the pigeonite-olivine ureilites was used to estimate the composition of melts in equilibrium with the ureilites. The results of 20 experiments saturated with olivine, pyroxene, metal, and liquid with appropriate ureilite compositions are used to calibrate the phase coefficients and pressure-temperature dependence of the smelting reaction. The calibrated coefficients are used to model the behavior of a hypothetical residue that is experiencing fractional smelting. The residue is initially olivine-rich and smelting progressively depletes the olivine content and enriches the pyroxene and metal contents of the residues. The modeled residue composition at 1260 °C best reproduces the trend of ureilite bulk compositions. The model results also indicate that as a ureilite residue undergoes isothermal decompression smelting over a range of temperatures, Ca/Al values and Cr₂O₃ contents are enriched at lower temperatures (below ∼1240 °C) and tend to decrease at higher temperatures. Therefore, fractional smelting can account for the high Ca/Al and Cr₂O₃ wt% values observed in ureilites. We propose that ureilites were generated from an olivine-rich, cpx-bearing residue. Smelting began when the residue was partially melted and contained liquid, olivine, and carbon. These residues experienced varying degrees of fractional smelting to produce the compositional variability observed within the pigeonite-bearing ureilites. Variations in mineral composition, modal proportions, and isotopic signatures are best described by heterogeneous accretion of the ureilite parent body followed by minimal and variable degrees of igneous processing.     

Formation of the Bencubbin polymict meteoritic breccia

The Bencubbin meteorite is a polymict breccia consisting of a host fraction of ~60% metal and ~40% ferromagnesian silicates and a selection of carbonaceous, ordinary and ‘enstatite’ chondritic clasts. Concentrations of 27 elements were determined by neutron activation in replicate samples of the host silicates and the ordinary and carbonaceous chondritic clasts; 12 elements were determined in the host metal. Compositional data for the ordinary chondrite clast indicate a classification of LL4 ± 1. Refractory element data for the carbonaceous chondrite clast indicate that it belongs to the CI-CM-CO clan; its volatile element abundances are intermediate between those of CM and CO chondrites. Abundances of nonvolatile elements in the silicate host are similar to those in the carbonaceous chondrite clast and in CM chondrites; the rare earths are unfractionated. We conclude that it is not achondritic as previously designated, but chondritic and that it is probably related to the CI-CM-CO clan; its volatile abundances are lower than those in CO chondrites. Oxygen isotope data are consistent with these classifications. Host metal in Bencubbin and in the closely related Weatherford meteorite has low abundances of moderately volatile siderophiles; among iron meteorite groups its nearest relative is group IIIF.We suggest that Bencubbin and Weatherford formed as a result of an impact event on a carbonaceous chondrite regolith. The impact generated an ‘instant magma’ that trapped and surrounded regolithic clasts to form the polymict breccia. The parent of this ‘magma’ was probably the regolith itself, perhaps mainly consisting of the so-called ‘enstatite’ chondrite materials. Accretion of such a variety of materials to a small parent body was probably only possible in the asteroid belt.     

The Nilpena ureilite,an unusual polymict breccia: implications for origin

Nilpena (173 g), a new ureilite find from the Parachilna area of South Australia, is an unusual polymict breccia containing polymineralic aggregates, mineral fragments and achondritic and chondritic lithic enclaves in a dark, C-rich matrix. The polymineralic aggregates consist of equigranular-textured olivine Fa₂₀ and pigeonite En₇₅Wo₉FS₁₆, and exhibit evidence of shock in the form of undulose extinction and kink-banding. Monomineralic fragments consist of olivine Fa_19–24 (with highly forsteritic rims up to Fa₃) and pigeonite, and appear to be derived by brecciation of the polymineralic aggregates. The enclave material consists of lithic granular olivine fragments, porphyritic enstatite fragments (either enstatite chondrite or aubrite), olivine-clinobronzite fragments resembling an H3 chondrite, and eucritelike lithic fragments composed of plagioclase An₉₈, salitic clinopyroxene Wo_48.5En_31.4Fs_20.1 and olivine Fa_49–53. The matrix contains kamacite (generally rich in P), schreibersite and troilite. The texture of Nilpena suggests formation by disruption of a olivine-pigeonite granular aggregate while the presence of the diverse chondritic and achondritic enclave material suggests an origin as a surface or near-surface breccia.Like other ureilites Nilpena is strongly differentiated with respect to cosmic abundances but is significantly enriched in Ba and LREE. A lack of correlation of lithophile elements with $\text{Fe}\text{(Fe + Mg)}$ ratio among ureilites suggests that the differentiation was not caused by varying degrees of partial melting of a homogeneous source. A cumulate origin therefore seems more plausible.     

Highly siderophile elements in ureilites

The abundances of the highly siderophile elements (HSE) Ru, Pd, Re, Os, Ir, and Pt were determined by isotope dilution mass spectrometry for 22 ureilite bulk rock samples, including monomict, augite-bearing, and polymict lithologies. This report adds significantly to the quantity of available Pt and Pd abundances in ureilites, as these elements were rarely determined in previous neutron activation studies. The CI-normalized HSE abundance patterns of all ureilites analyzed here except ALHA 81101 show marked depletions in the more volatile Pd, with CI chondrite-normalized Pd/Os ratios (excluding ALHA 81101) averaging 0.19 ± 0.23 (2σ). This value is too low to be directly derived from any known chondrite group. Instead, the HSE bulk rock abundances and HSE interelement ratios in ureilites can be understood as physical mixtures of two end member compositions. One component, best represented by sample ALHA 78019, is characterized by superchondritic abundances of refractory HSE (RHSE—Ru, Re, Os, Ir, and Pt), but subchondritic Pd/RHSE, and is consistent with residual metal after extraction of a S-bearing metallic partial melt from carbonaceous chondrite-like precursor materials. The other component, best represented by sample ALHA 81101, is RHSE-poor and has HSE abundances in chondritic proportions. The genesis of the second component is unclear. It could represent regions within the ureilite parent body (UPB), in which metallic phases were completely molten and partially drained, or it might represent chondritic contamination that was added during disruption and brecciation of the UPB. Removal of carbon-rich melts does not seem to play an important role in ureilite petrogenesis. Removal of such melts would quickly deplete the ureilite precursors in Re/Os and As/Au, which is inconsistent with measured osmium isotope abundances, and also with literature As/Au data for the ureilites. Removal of ²⁶Al during silicate melting may have acted as a switch that turned off further metal extraction from ureilite source regions.     

Petrogenesis of augite-bearing ureilites Hughes 009 and FRO 90054/93008 inferred from melt inclusions in olivine, augite and orthopyroxene

Melt inclusions in ureilites occur only in the small augite- and orthopyroxene-bearing subgroups. Previously [Goodrich C.A., Fioretti A.M., Tribaudino M. and Molin G. (2001) Primary trapped melt inclusions in olivine in the olivine-augite-orthopyroxene ureilite Hughes 009. Geochim. Cosmochim. Acta65, 621-652] we described melt inclusions in olivine in the olivine-augite-orthopyroxene ureilite Hughes 009 (Hughes). FRO 90054/93008 (FRO) is a near-twin of Hughes, and has abundant melt inclusions in all three primary silicates. We use these inclusions to reconstruct the major, minor and rare earth element composition of the Hughes/FRO parent magma and evaluate models for the petrogenesis of augite-bearing ureilites.Hughes and FRO consist of 23-47 vol % olivine (Fo 87.3 and 87.6, respectively), 7-52 vol % augite (mg 89.2, Wo 37.0 and mg 88.8, Wo 38.0, respectively), and 12-56 vol % orthopyroxene (mg 88.3, Wo 4.9 and mg 88.0, Wo 4.8, respectively). They have coarse-grained (?3 mm), highly-equilibrated textures, with poikilitic relationships indicating the crystallization sequence olivine → augite → orthopyroxene. FRO is more shocked than Hughes, experienced greater secondary reduction, and is more weathered. The two meteorites are probably derived from the same lithologic unit.Melt inclusions in olivine consist of glass ± daughter cpx ± metal-sulfide-phosphide spherules ± chromite, and have completely reequilibrated Fe/Mg with their hosts. We follow the method of Goodrich et al. (2001) for reconstructing the composition of the primary trapped liquid they represent (olPTL), but correct an error in our treatment of the effects of reequilibration. Inclusions in augite consist of glass, which shows only partial reequilibration of Fe/Mg. The composition of the primary trapped liquid they represent (augPTL) is reconstructed by reverse fractional crystallization of wall augite from the most ferroan glass. Inclusions in orthopyroxene consist of glass + 30-50 vol % daughter cpx. The cpx shows complete, but the glass only partial, reequilibration of Fe/Mg. A range of possible compositions for the primary trapped liquid they represent (opxPTL) is calculated by modal recombination of glass and cpx, followed by addition of wall orthopyroxene and adjustment of Fe/Mg for equilibrium with the primary orthopyroxene. Only a small subset of these compositions is plausible on the basis of being orthopyroxene-saturated.Results indicate that olPTL, assumed to represent the parent magma of these rocks, was saturated only with olivine and in equilibrium with Fo ∼ 83. AugPTL and opxPTL are very similar in composition; both are close to augite + orthopyroxene co-saturation and in equilibrium with Fo 87/8. We suggest that olPTL was reduced to Fo 87/8 due to smelting during ascent, and show that this produces a composition very similar to that of augPTL and opxPTL.REE data for each of the three primary silicates and the least evolved melt inclusions in olivine are used to calculate REE abundances in the Hughes/FRO parent magma. All four methods yield very similar results, indicating a REE pattern that is strongly LREE-depleted (Sm/La = 3.3-3.7), with a small negative Eu anomaly (Eu/Eu* = 0.82) and slight HREE-depletion (Gd/Lu = 1.4-1.6).The Hughes/FRO parent magma provides a robust constraint on models for the petrogenesis of augite-bearing ureilites. Its major, minor and rare earth element composition suggests derivation through mixing and/or assimilation processes, rather than as a primary melt on the ureilite parent body.     

The Kaidun chondrite breccia: Petrology, oxygen isotopes, and trace element abundances

Oxygen isotope and trace element data for 13 samples of the Kaidun chondritic breccia reaffirm the complex polymict nature of this unique meteorite. Bulk Kaidun samples most closely resemble CR chondrites, but the matrix is CI-like. Two separated clasts are CR-like but have some properties that resemble CM, two clasts are enstatite chondrites (one EL and one EH), one clast is an aubrite-like metal-rich impact melt, and one clast is a unique layered olivine-bearing pyroxenite with the isotopic composition of an aubrite. Yet, although each clast resembles a known meteorite group, all deviate in some respect from the norms for those groups. Collectively, Kaidun has sampled materials not yet represented in the world meteorite collections and which greatly extend the definitions of known meteorite groups. Phyllosilicates in Kaidun span a very wide range in composition and vary from clast to clast, suggesting that the aqueous alteration experienced by the clasts predated assembly of the Kaidun parent body.     

Impact features of enstatite-rich meteorites

Enstatite-rich meteorites include EH and EL chondrites, rare ungrouped enstatite chondrites, aubrites, a few metal-rich meteorites (possibly derived from the mantle of the aubrite parent body), various impact-melt breccias and impact-melt rocks, and a few samples that may be partial-melt residues ultimately derived from enstatite chondrites. Members of these sets of rocks exhibit a wide range of impact features including mineral-lattice deformation, whole-rock brecciation, petrofabrics, opaque veins, rare high-pressure phases, silicate darkening, silicate-rich melt veins and melt pockets, shock-produced diamonds, euhedral enstatite grains, nucleation of enstatite on relict grains and chondrules, low MnO in enstatite, high Mn in troilite and oldhamite, grains of keilite, abundant silica, euhedral graphite, euhedral sinoite, F-rich amphibole and mica, and impact-melt globules and spherules. No single meteorite possesses all of these features, although many possess several. Impacts can also cause bulk REE fractionations due to melting and loss of oldhamite (CaS) – the main REE carrier in enstatite meteorites. The Shallowater aubrite can be modeled as an impact-melt rock derived from a large cratering event on a porous enstatite chondritic asteroid; it may have been shock melted at depth, slowly cooled and then excavated and quenched. Mount Egerton may share a broadly similar shock and thermal history; it could be from the same parent body as Shallowater. Many aubrites contain large pyroxene grains that exhibit weak mosaic extinction, consistent with shock-stage S4; in contrast, small olivine grains in some of these same aubrites have sharp or undulose extinction, consistent with shock stage S1 to S2. Because elemental diffusion is much faster in olivine than pyroxene, it seems likely that these aubrites experienced mild post-shock annealing, perhaps due to relatively shallow burial after an energetic impact event. There are correlations among EH and EL chondrites between petrologic type and the degree of shock, consistent with the hypothesis that collisional heating is mainly responsible for enstatite-chondrite thermal metamorphism. Nevertheless, the apparent shock stages of EL6 and EH6 chondrites tend to be lower than EL3-5 and EH3-5 chondrites, suggesting that the type-6 enstatite chondrites (many of which possess impact-produced features) were shocked and annealed. The relatively young Ar–Ar ages of enstatite chondrites record heating events that occurred long after any ²⁶Al that may have been present initially had decayed away. Impacts remain the only plausible heat source at these late dates. Some enstatite meteorites accreted to other celestial bodies: Hadley Rille (EH) was partly melted when it struck the Moon; Galim (b), also an EH chondrite, was shocked and partly oxidized when it accreted to the LL parent asteroid. EH, EL and aubrite-like clasts also occur in the polymict breccias Kaidun (a carbonaceous chondrite) and Almahata Sitta (an anomalous ureilite). The EH and EL clasts in Kaidun appear unshocked; some clasts in Almahata Sitta may have been extensively shocked on their parent bodies prior to being incorporated into the Almahata Sitta host.     

Fractional melting and smelting on the ureilite parent body

We investigate petrologic and physical aspects of melt extraction on the parent asteroid of the ureilite meteorites (UPB). We first develop a petrologic model for simultaneous melting and smelting (reduction of FeO by C) at various depths. For a model starting composition, determined from petrologic constraints to have been CV-like except for elevated Ca/Al (2.5 × CI), we determine (1) degree of melting, (2) the evolution of mg, (3) production of CO + CO₂ gas and (4) the evolution of mineralogy in the residue as a function of temperature and pressure. We then use these relationships to examine implications of fractional vs. batch melt extraction.In the shallowest source regions (∼30 bars), melting and smelting begin simultaneously at ∼1050 °C, so that mg and the abundance of low-Ca pyroxene (initially pigeonite, ultimately pigeonite + orthopyroxene) begin to increase immediately. However, in the deepest source regions (∼100 bars), smelting does not begin until ∼1200 °C, so that mg begins to increase and low-Ca pyroxene (pigeonite) appears only after ∼21% melting. The final residues in these two cases, obtained just after the demise of augite, match the end-members of the ureilite mg range (∼94-76) in pyroxene abundance and type. In all source regions, production of CO + CO₂ by smelting varies over the course of melting. The onset of smelting results in a burst of gas production and very high incremental gas/melt ratios (up to ∼2.5 by mass); after a few % (s)melting, however, these values drastically decline (to <0.05 in the final increments).Physical modelling based on these relationships indicates that melts would begin to migrate upwards after only ∼1-2% melting, and thereafter would migrate continuously (fractionally) and rapidly (reaching the surface in < a year) in a network of veins/dikes. All melts produced during the smelting stage in each source region have gas contents sufficient to cause them to erupt explosively and be lost. However, since in all but the shallowest source regions part of the melting sequence occurs without smelting, fractional melting implies that a significant fraction of UPB melts may have erupted more placidly to form a thin crust (∼3.3 km thick for a 100 km radius body).Our calculations suggest that melt extraction was so rapid that equilibrium trace element partitioning may not have been attained. We present a model for disequilibrium fractional melting (in which REE partitioning is limited by diffusion) on the UPB, and demonstrate that it produces a good match to the ureilite data. The disequilibrium model may also apply to trace siderophile elements, and might help explain the “overabundance” of these elements in ureilites relative to predictions from the smelting model.Our results suggest that melt extraction on the UPB was a rapid, fractional process, which can explain the preservation of a primitive oxygen isotopic signature on the UPB.     

Oxygen isotope systematics of chondrules in the Allende CV3 chondrite: High precision ion microprobe studies

The oxygen three-isotope systematics of 36 chondrules from the Allende CV3 chondrite are reported using high precision secondary ion mass spectrometer (CAMECA IMS-1280). Twenty-six chondrules have shown internally homogenous Δ¹⁷O values among olivine, pyroxene, and spinel within a single chondrule. The average Δ¹⁷O values of 19 FeO-poor chondrules (13 porphyritic chondrules, 2 barred olivine chondrules, and 4 chondrule fragments) show a peak at −5.3 ± 0.6‰ (2SD). Another 5 porphyritic chondrules including both FeO-poor and FeO-rich ones show average Δ¹⁷O values between −3‰ and −2‰, and 2 other FeO-poor barred olivine chondrules show average Δ¹⁷O values of −3.6‰ and 0‰. These results are similar to those for Acfer 094 chondrules, showing bimodal Δ¹⁷O values at −5‰ and −2‰. Nine porphyritic chondrules contain olivine grains with heterogeneous Δ¹⁷O values as low as −18‰, indicating that they are relict olivine grains and some of them were derived from precursors related to refractory inclusions. However, most relict olivine grains show oxygen isotope ratios that overlap with those in homogeneous chondrules. The Δ¹⁷O values of four barred olivine chondrules range from −5‰ to 0‰, indicating that not all BO chondrules plot near the terrestrial fractionation line as suggested by previous bulk chondrule analyses. Based on these data, we suggest the presence of multiple oxygen isotope reservoirs in local dust-rich protoplanetary disk, from which the CV3 parent asteroid formed.A compilation of 225 olivine and low-Ca pyroxene isotopic data from 36 chondrules analyzed in the present study lie between carbonaceous chondrite anhydrous mineral (CCAM) and Young and Russell lines. These data define a correlation line of δ¹⁷O = (0.982 ± 0.019) × δ¹⁸O − (2.91 ± 0.10), which is similar to those defined by chondrules in CV3 chondrites and Acfer 094 in previous studies. Plagioclase analyses in two chondrules plot slightly below the CCAM line with Δ¹⁷O values of −2.6‰, which might be the result of oxygen isotope exchange between chondrule mesostasis and aqueous fluid in the CV parent body.     

A single asteroidal source for extraterrestrial Ordovician chromite grains from Sweden and China: High-precision oxygen three-isotope SIMS analysis

We examined oxygen three-isotope ratios of 48 extraterrestrial chromite (EC) grains extracted from mid-Ordovician sediments from two different locations in Sweden, and one location in south-central China. The ages of the sediments (∼470 Ma) coincide with the breakup event of the L chondrite parent asteroid. Elemental compositions of the chromite grains are generally consistent with their origin from L or LL chondrite parent bodies. The average Δ¹⁷O (‰-deviation from the terrestrial mass-fractionation line, measured in situ from 15 μm spots by secondary ion mass spectrometry; SIMS) of EC grains extracted from fossil meteorites from Thorsberg and Brunflo are 1.17 ± 0.09‰ (2σ) and 1.25 ± 0.16‰, respectively, and those of fossil micrometeorites from Thorsberg and Puxi River are 1.10 ± 0.09‰, and 1.11 ± 0.12‰, respectively. Within uncertainty these values are all the same and consistent with the L chondrite group average Δ¹⁷O = 1.07 ± 0.18‰, but also with the LL chondrite group average Δ¹⁷O = 1.26 ± 0.24‰ (Clayton et al., 1991). We conclude that the studied EC grains from correlated sediments from Sweden and China are related, and most likely originated in the same event, the L chondrite parent body breakup. We also analyzed chromites of modern H, L and LL chondrites and show that their Δ¹⁷O values coincide with averages of Δ¹⁷O of bulk analyses of H, L and LL chondrites. This study demonstrates that in situ oxygen isotope data measured by SIMS are accurate and precise if carefully standardized, and can be used to classify individual extraterrestrial chromite grains found in sediments.     

Cadmium stable isotope cosmochemistry

Cadmium stable isotope compositions are reported for a comprehensive suite of carbonaceous, ordinary, enstatite, and Rumuruti chondrites as well as achondrites and lunar samples (soils, breccias, pristine anorthosite). The Cd isotope analyses were performed by multiple collector ICP-MS with an external reproducibility of ±0.43‰ (2 sd) for δ^114/110Cd. None of the samples shows evidence of nucleosynthetic anomalies and cosmogenic isotope effects from neutron-capture by ¹¹³Cd were only observed for two lunar samples.The Cd stable isotope compositions of type 1, 2, and some type 3 carbonaceous chondrites, EH4 enstatite chondrites, eucrites, and the Earth are essentially identical at δ^114/110Cd ≈ 0.0 ± 0.4. This suggests that the portion of the solar nebula from which the inner solar system bodies accreted was homogeneous with respect to its Cd isotope composition. It also indicates that the primary volatile element depletion of the inner solar system did not involve partial kinetic Rayleigh evaporation or condensation. Furthermore no resolvable Cd isotope effects were generated during the accretion and initial differentiation of the planetary bodies.In contrast, the analyses reveal large Cd isotope effects for ordinary and some enstatite chondrites, which display δ^114/110Cd values between about −8 and +16. Smaller fractionations are observed for the Rumuruti and some type 3 to 5 carbonaceous chondrites. These Cd isotope variations are thought to reflect secondary depletion or redistribution of Cd, due to open system thermal metamorphism on the meteorite parent bodies.One CAI and chondrule separates from the Allende meteorite have unexpectedly high Cd concentrations and fractionated light Cd isotope compositions with δ^114/110Cd ≈ −1 to −4. These characteristics may have been established by the interaction of originally Cd-poor materials with a volatile-rich gas prior to the final accretion of the Allende parent body. The general Cd enrichment of the lunar soil and regolith mainly reflects early volcanic activity. However, decreasing Cd abundances in lunar soils correlate well with an enrichment of the heavy Cd isotopes. This relationship is best explained by suppressed Rayleigh fractionation in response to space weathering.     

Imbrium provenance for the Apollo 16 Descartes terrain: Argon ages and geochemistry of lunar breccias 67016 and 67455

In order to improve our understanding of impact history and surface geology on the Moon, we obtained ⁴⁰Ar-³⁹Ar incremental heating age data and major + trace element compositions of anorthositic and melt breccia clasts from Apollo 16 feldspathic fragmental breccias 67016 and 67455. These breccias represent the Descartes terrain, a regional unit often proposed to be ejecta from the nearby Nectaris basin. The goal of this work is to better constrain the emplacement age and provenance of the Descartes breccias.Four anorthositic clasts from 67016 yielded well-defined ⁴⁰Ar-³⁹Ar plateau ages ranging from 3842 ± 19 to 3875 ± 20 Ma. Replicate analyses of these clasts all agree within measurement error, with only slight evidence for either inheritance or younger disturbance. In contrast, fragment-laden melt breccia clasts from 67016 yielded apparent plateau ages of 4.0-4.2 Ga with indications of even older material (to 4.5 Ga) in the high-T fractions. Argon release spectra of the 67455 clasts are more variable with evidence for reheating at 2.0-2.5 Ga. We obtained plateau ages of 3801 ± 29 to 4012 ± 21 Ma for three anorthositic clasts, and 3987 ± 21 Ma for one melt breccia clast. The anorthositic clasts from these breccias and fragments extracted from North Ray crater regolith (Maurer et al., 1978) define a combined age of 3866 ± 9 Ma, which we interpret as the assembly age of the feldspathic fragmental breccia unit sampled at North Ray crater. Systematic variations in diagnostic trace element ratios (Sr/Ba, Ti/Sm, Sc/Sm) with incompatible element abundances show that ferroan anorthositic rocks and KREEP-bearing lithologies contributed to the clast population.The Descartes breccias likely were deposited as a coherent lithologic unit in a single event. Their regional distribution suggests emplacement as basin ejecta. An assembly age of 3866 ± 9 Ma would be identical with the accepted age of the Imbrium basin, and trace element compositions are consistent with a provenance in the Procellarum-KREEP Terrane. The combination of age and provenance constraints points toward deposition of the Descartes breccias as ejecta from the Imbrium basin rather than Nectaris. Diffusion modeling shows that the older apparent plateau ages of the melt brecia clasts plausibly result from incomplete degassing of ancient crust during emplacement of the Descartes breccias. Heating steps in the melt breccia clasts that approach the primary crystallization ages of lunar anorthosites show that earlier impact events did not completely outgas the upper crust.