Bioaccumulation of Cobalt in Parmelia sulcata

Six locations across mainland Portugal were selected for exposing Parmelia sulcata, for a one-year period (8 months for one site), with simultaneous measurement of total (dry + wet) deposition (one-month periods). The exposed lichens and the total (dry + wet) deposition were analysed for cobalt contents by INAA (instrumental neutron activation analysis) and ICP-MS (inductively coupled plasma mass spectroscopy), respectively. The designated wet deposition was evaluated through the collected water volume; the designated dry deposition was assessed after the (dried) residual mass of the wet deposition. An excellent agreement between Co contents in exposed lichens and the cumulative (1) Co contents in the dry deposition, (2) dry deposition, and (3) wet deposition has been found for the locations with alternate drought and precipitation months, high dry deposition, and high Co contents in the latter. Continuous rainfall was found to hinder the Co accumulation in the lichen due to its release from the lichen and/or lower Co contents in the dry deposition. At three locations, P. sulcata Co contents, after subtraction of the background (before exposure), equalled or exceeded the Co contents in the cumulative dry deposition at the end of the exposure time. The optimal exposure period for this species likely depends on the exposure conditions.     

Arctic hazes in summer over Greenland and the North American Arctic: II. Nature and concentrations of accumulation-mode and giant particles

Airborne measurements made during August 1985 over Greenland and its environs show that both accumulation-mode (0.1 m D2.0 m) and giant (D2 m) particles were present in relatively high concentrations in arctic haze layers and that the accumulation-mode particles dominated light scattering. Particles with diameters (D) between 1 and 4 m consisted predominately of mixed materials, small and dense inclusions, and probably organic compounds containing sulfur. Many of the particles from 0.1 to 1 m in diameter were also of mixed composition, with sulfuric acid, ammonium sulfate and organics probably the dominant constituents.     

A study of the sensitivity of bare soil evaporation schemes to soil surface wetness,using the coupled soil moisture and surface temperature prediction model,BARESOIL

Summary The performance of evaporation schemes with and approach and their combination within resistance representation of evaporation from bare soil surface is discussed. For this purpose nine schemes, based on different functions of or , on the ratio of the volumetric soil moisture content and its saturated value are used.The quality of the chosen schemes has been evaluated using the results of time integration by the coupled soil moisture and surface temperature prediction model, BARESOIL, using in situ data. A sensitivity analysis was made using two sets of data derived from the volumetric soil moisture content of the top soil layer. One with values below the wilting point (0.17 m³m^–3) and the second with values above 0.20m³m^–3. Data sets were obtained at the experimental site Rimski anevi, Yugoslavia, from the bare surface of a chernozem soil.With 4 Figures     

Northern hemisphere atmospheric response to changes of atlantic ocean SST on decadal time scales: a GCM experiment

Analyses indicate that the Atlantic Ocean seasurface temperature (SST) was considerably colder at the beginning than in the middle of the century. In parallel, a systematic change in the North Atlantic sea-level pressure (SLP) pattern was observed. To find out whether the SST and SLP changes analyzed are consistent, which would indicate that the SST change was real and not an instrumental artifact, a response experiment with a low-resolution (T21) atmospheric GCM was performed. Two perpetual January simulations were conducted, which differ solely in the Atlantic Ocean (40° S-60° N) SST: the cold simulation utilizes the SSTs for the period 1904–1913; the warm simulation uses the SSTs for the period 1951–1960. Also, a control run with the model's standard SST somewhat between the cold and warm SST was made. For the response analysis, a rigorous statistical approach was taken. First, the null hypothesis of identical horizontal distributions was subjected to a multivariate significance test. Second, the level of recurrence was estimated. The multivariate statistical approaches are based on hierarchies of test models. We examined three different hierarchies: a scale-dependent hierarchy based on spherical harmonics (S), and two physically motivated ones, one based on the barotropic normal modes of the mean 300 hPa flow (B) and one based on the eigenmodes of the advection diffusion operator at 1000 hPa (A). The intercomparison of the cold and warm experiments indicates a signal in the geostrophic stream function that in the S-hierarchy is significantly nonzero and highly recurrent. In the A-hierarchy, the low level temperature field is identified as being significantly and recurrently affected by the altered SST distribution. The SLP signal is reasonably similar to the SLP change observed. Unexpectedly, the upper level stream-function signal does not appear to be significantly nonzero in the B-hierarchy. If, however, the pairs of experiments warm versus control and cold versus control are examined in the B-hierarchy, a highly significant and recurrent signal emerges. We conclude that the cold versus warm response is not a small disturbance that would allow the signal to be described by eigenmodes of the linear system. An analysis of the three-dimensional structure of the signal leads to the hypothesis that two different mechanisms are acting to modify the model's mean state. At low levels, local heating and advection are dominant, but at upper levels the extratropical signal is a remote responce to modifications of the tropical convection.This paper was presented at the International Conference on Modelling of Global Climate Change and Variability, held in Hamburg 11–15 September 1989 under the auspices of the Meteorological Institute of the University of Hamburg and the Max Planck Institute for Meteorology. Guest Editor for these papers is Dr. L. Dilmenil.AWI Publication no. 254     

ALPEX-Simulation

Summary In a project ALPEX-Simulation, sponsored by the Österreichischer Fond zur Förderung der wissenschaftlichen Forschung (FWF), all eight cases of ALPEX-SOP cyclones were numerically simulated with a fine mesh isentropic model of the atmosphere. These numerical simulations in six-hourly intervals allow a deeper insight into the synoptics and dynamics of the cyclogeneses in the Western Mediterranean, especially into the genesis of the two basic types of cyclones: the so-called Überströmungs-type and Vorderseiten-type. In the first phase of cyclogenesis of the Überströmungs-type, the blocking and flow splitting of the cold air due to the Alps and the canalization between the Alps and the Massif Central are important. Cold air flows cyclonically around the western part of the Alps, creating a vorticity maximum at the south western edge of the Alpine, bow and leads also to an enhanced PV. In connection with warm air in the Mediterranean, a strong baroclinic zone is generated. The interaction between the arriving PV maximum in the upper troposphere and the enhanced PV at the bottom leads to cyclogenesis in the Western Mediterranean. In the case of the Vorderseiten-type warm air advection dominates with the exception of a shallow layer of cold air in the inner Po-Valley, which is shielded by the Alpine ridge. A well-pronounced PV maximum builds up and couples with the PV maximum arriving at upper levels, even before the cold air, coming from the north-west, has surrounded the Alps. The cold air only intensifies the development by raising the baroclinity. Therefore, the Vorderseiten-cyclogenesis is an orographically modified cyclogenesis, in the course of which the cyclonic development is triggered by the Alps, whereas the Überströmungs-cyclogenesis is an orographically induced cyclogenesis i.e. a true lee cyclogenesis.With 14 FiguresDied in a tragic traffic accident on June 6, 1993.     

Hidden information within series of measurements — four examples from atmospheric science

Whether in classical networks such as meteorological networks of in more recent ones of atmospheric chemistry, a wealth of data is at hand. These data have been evaluated in a manner depending on the purpose of the network. However, much more information is hidden in these time series and waits for discovery. Only the imagination of scientists is needed. Four examples are given which lead to new information about the atmospheric aerosol and the behaviour of the atmosphere. These examples are: Atmospheric turbidity from sunshine recordings, Meteorological drainage area from the variance of observations, Location of point sources from air mass trajectories, and Total vertical ozone from turbidity measurements.     

The validation of various schemes for parameterizing evaporation from bare soil for use in meteorological models: A numerical study using in situ data

Parameterization of evaporation from a non-plant-covered surface is very important in the hierarchy strategy of modelling land surface processes. One of the representations frequently used in its computation is the resistance formulation. The performance of the evaporation schemes using the , , and their combination resistance approaches to parameterize evaporation from bare soil surfaces is discussed. For that purpose, the nine schemes, based on a different dependence of and on volumetric soil moisture content and its saturated value, are used.The tests of performances of the considered schemes are based on time integrations by the land surface module (BARESOIL) using observed data. The 23 data sets at a bare surface experimental site in Rimski anevi, Yugoslavia on chernozem soil, were used for the resistance algorithm evaluation. The quality of the schemes was compared with the observed values of the latent heat flux using several statistical parameters.     

On some new statistical characteristics of the wind “Koshava”

Summary Koshava is a gusty wind of moderate to strong intensity, blowing from the south-eastern direction, over the area of the Republic of Serbia. It is caused by the interaction between the synoptic circulation and the orography of the Carpathian and the Balkan mountains. The Koshava wind can damage buildings, factories and industrial plants or city infrastructure. Therefore it is important to estimate its gust and the gustiness factor on the basis of the measured data.This paper discusses a statistical analysis of wind data in the maximum influence area of the Koshava wind in the periods of maximum duration of Koshava. The focus of the paper is the examination of urban and suburban effects on Koshava wind and the correlation between the instantaneous maximum wind speed and the hourly mean wind speed. The best fitting with various empirical distributions is proposed.With 10 Figures     

Feature-based predictability of 500 hpa height in the Australia-New Zealand region

Summary Feature-based predictability stratifies forecast model errors on the basis of individual weather systems. We examine only one level and chose very simple categories: high, cut-off low, trough and block. European Centre for Medium-range Weather Forecasts data are used. We emphasize systems found near Australia and New Zealand during winter 1987. Calculations for the preceding summer and fall and for other midlatitude regions of the southern hemisphere yield similar results.The approach herein is fully automated and simple to implement. Features are identified in the verification field. Then an error calculation is made on moving grids that are each centered upon and contain one system.The total error is the root mean square difference (RMS) between forecast and verification. The structural error is the RMS difference when the forecast and verification small grids are independently centered upon the corresponding feature in each field. The difference between the structural and total errors, called the locational error, is typically a quarter of the total. Even when normalized by presistence, highs are forecast better than troughs; cut-off lows and troughs have similar errors. The distance between the forecast and observed positions is typically 3° longitude west and 0.5° latitude north of where features should be at 72 hours. The model has a systematic bias of too small amplitude of vorticity. No relation is found between skill and jet stream splitting.With 4 Figures     

A mechanism of Alpine lee cyclogenesis as revealed by a quasigeostrophic variational filter

Summary Mechanisms associated with Alpine lee cyclogenesis during the early phase of their generation are investigated using a variational quasigeostrophic filter technique. It was possible to extract the quasigeostrophic signal from the available analyzed real data set.The results presented here are for the 11–12 March 1982, an example of so-called orographically induced lee cyclogenesis. Non-quasigeostrophic fields, calculated as a difference between observations and the quasigeostrophic fields, show significant magnitudes indicating the possible importance of non-quasigeostrophic processes. A dipole structure in the residual geopotential field was observed, similar to the results of numerical model experiments. Also, a strong upper-level non-quasigeostrophic divergence was found in the Alpine region 24 hours prior to lee cyclogenesis, lasting for 6–12 hours. On the other hand, quasigeostrophic results indicate only a local effect of mountain slopes, suggesting possibly a dominant role of the low-level blocking. A hypothetical scenario of Alpine lee cyclogenesis is proposed, based on results obtained here.With 14 Figures     

Re-analysis of the nuclear winter phenomenon

Summary An analysis of the report of the (U.S.) National Academy of Sciences (NAS) on atmospheric effects of a nuclear exchange leads to conclusions that differ from those of the NAS and of the earlier TTAPS and AMBIO studies. Any cooling of the earth's surface is likely to beshort-lived because of rapid removal of the smoke clouds originating from nuclear burst-initiated fires, andminor because of appreciable green-house effects due to several distinct physical causes. (One of these, neglected in prior analyses, is the infrared absorption from cirrus clouds produced directly by the nuclear bursts.) Taken together, these effects may even induce slight surface warming (nuclear summer) instead of cooling (nuclear winter). The consequences to atmospheric ozone are similarly ambiguous; depending on the detailed nuclear scenario, the net ozone content may increase-rather than decrease as argued by TTAPS. Experiments could settle some uncertainties.With 2 Figures     

On the turbulence structure in the stable boundary layer over the Greenland ice sheet

Turbulence measurements from a 30 m tower in the stably stratifiedboundary layer over the Greenland ice sheet are analyzed. The observationsinclude profile and eddy-correlation measurements at various levels. Atfirst, the analysis of the turbulence data from the lowest level (2 m aboveground) shows that the linear form of the non-dimensional wind profile(m) is in good agreement with the observations for z/L <0.4, whereL represents the Obukhov length. A linear regression yieldsm=1+5.8z/L. The non-dimensional temperature profile (h) at the2m level shows no tendency to increase with increasing stability. The datafrom the upper levels of the tower are analyzed in terms of both localscaling and surface-layer scaling. The m and the h values show atendency to level off at large stability (z/>0.4) where represents the local Obukhov length. Hence, the linear form of the functions is no longer appropriate under such conditions. The bestcorrespondence to the data can be achieved when using the expression ofBeljaars and Holtslag for m and h. The vertical profiles of theturbulent fluxes, the wind velocity variances and temperature variance arealso determined. The momentum flux profile and the profiles of wind speedvariances are in general agreement with other observations if a welldeveloped low-level wind maximum occurs, and the height of this maximum isused as a height scale.     

Nine fallacies of natural disaster: The case of the Sahel

This article presents nine statements which are generally accepted as true. However, when they are applied to a particular situation, in this case the recent prolonged drought in the Sahelian zone in West Africa, they are as often untrue as they are true. For example, such generalizations as people learn from their mistakes or when the rains come, everything will return to normal or technology is the answer, when applied uncritically to a specific situation often prove to become part of the problem as well as a hindrance to the attainment of a solution to that problem.It is strongly suggested that these nine generalizations, here called fallacies, be carefully assessed when applied, thereby removing one more obstacle in dealing with environmental problems in general and natural hazards in particular.Published in Michael H. Glantz (ed.), The Politics of Natural Disasters: The Case of the Sahel Drought (NY: Praeger Publ., 1976) reprinted by permission.Michael H. Glantz is a scientist in the Advanced Study Program at the National Center for Atmospheric Research which is sponsored by the National Science Foundation.     

Application of a “Big-Tree” model to regional climate modeling: a sensitivity study

Summary ¶In order to better understand land-atmosphere interactions and increase the predictability of climate models, it is important to investigate the role of forest representation in climate modeling. Corresponding to the big-leaf model commonly employed in land surface schemes to represent the effects of a forest, a so called big-tree model, which uses multi-layer vegetation to represent the vertical canopy heterogeneity, was introduced and incorporated into the National Center for Atmospheric Research (NCAR) regional climate model RegCM2, to make the vegetation model more physically based. Using this augmented RegCM2 and station data for China during 1991 Meiyu season, we performed 10 experiments to investigate the effects of the application of the big-tree model on the summer monsoon climate.With the big-tree model incorporated into the regional climate model, some climate characteristics, e.g. the 3-month-mean surface temperature, circulation, and precipitation, are significantly and systematically changed over the model domain, and the change of the characteristics differs depending on the area. Due to the better representation of the shading effect in the big-tree model, the temperature of the lower layer atmosphere above the plant canopy is increased, which further influences the 850hPa temperature. In addition, there are significant decreases in the mean latent heat fluxes (within 20–30W/m²) in the three areas of the model domain.The application of the big-tree model influences not only the simulated climate of the forested area, but also that of the whole model domain, and its impact is greater on the lower atmosphere than on the upper atmosphere. The simulated rainfall and surface temperature deviate from the originally simulated result and are (or seem to be) closer to the observations, which implies that an appropriate representation of the big-tree model may improve the simulation of the summer monsoon climate.We also find that the simulated climate is sensitive to some big-tree parameter values and schemes, such as the shape, height, zero-plane displacement height and mixing-length scheme. The simulated local/grid differences may be very large although the simulated areal-average differences may be much lower. The area-average differences in the monthly-mean surface temperature and heat fluxes can amount to 0.5°C and 4W/m², respectively, which correspond to maximum local/grid differences of 3.0°C and 40W/m² respectively. It seems that the simulated climate is most sensitive to the parameter of the zero-plane displacement among the parameters studied.     

Final results of the CONDORS convective diffusion experiment

TheConvectiveDiffusionObserved byRemoteSensors (CONDORS) field experiment conducted at the Boulder Atmospheric Observatory used innovative techniques to obtain three-dimensional mappings of plume concentration fields, /Q, of oil fog detected by lidar and chaff detected by Doppler radar. It included extensive meteorological measurements and, in 1983, tracer gases measured at a single sampling arc. Final results from ten hours of elevated and surface release data are summarized here. Many intercomparisons were made. Oil fog /Q measured 40m above the arc are mostly in good agreement withSF ₆ values, except in a few instances with large spacial inhomogeneities over short distances. After a correction scheme was applied to compensate for the effect of its settling speed, chaff dy/Q agreed well with those of oil except in two cases of oil fog hot spots. Mass or frequency distribution vs. azimuth or elevation angle comparisons were made for chaff, oil, and wind, with mostly good agreements. Spacial standard deviations, _y and _z, of chaff and oil agree overall and are consistent at short range with velocity standard deviations _vand _w 0.6w^* (the convective scale velocity), as measured atz>100m. Surface release _y is enhanced up to 60% at smallx, consistent with the Prairie Grass measurements and with larger _v and reduced wind speed measured near the surface. Decreased _y at small dimensionless average times is also noted. Finally, convectively scaled dy, C _y, were plotted versus dimensionlessx andz for oil, chaff, and corrected chaff for each 30–60 min period. Aggregated CONDORSC _y fields compare well with laboratory tank and LES numerical simulations; surface-released oil fog compares expecially well with the tank experiments. However, large deviations from the norm occurred in individual averaging periods; these deviations correlated strongly with anomalies in measured distributions.On assignment to the US Environmental Protection Agency, Atmospheric Research and Exposure Assessment Laboratory, RTP, NC.     

Thermal comfort of man in different urban environments

Summary On July 29, 1985, a hot summer day, biometeorological measurements were performed simultaneously in three different urban structures within the city of Munich and in the trunk space of a nearby tall spruce forest. Based on the results of these experiments the following thermophysiologically relevant biometeorological indices were calculated: Predicted mean vote, skin wettedness and physiologically equivalent temperature. These three indices are derived from different models for the human energy balance. They allow the assessment of the thermal components of the microclimates at the selected sites with regard to application in urban planning. The results quantitatively show the great heat stress in the urban structure street canyon, exposed to south, whereas in the trunk space of the tall spruce forest there is nearly an optimal climate even on hot summer days. Between these extremes the results for street canyon, exposed to north show a little higher heat load than for backyard with trees.

---

Zusammenfassung An einem heißen Sommertag, dem 29. Juli 1985, wurden in drei Stadtstrukturen in München und im Stammraum eines nahegelegenen Fichtenhochwaldes zeitgleich biometeorologische Messungen durchgeführt. Mit den Meßergebnissen wurden folgende thermophysiologisch relevante biometeorologische Indizes berechnet: Predicted mean vote, Hautbenetzungsgrad und physiologisch äquivalente Temperatur. Diese drei Indizes beruhen auf verschiedenen Modellen zur menschlichen Energiebilanz. Mit den drei Indizes wurden die thermischen Komponenten der Mikroklimate an den ausgewählten Meßplätzen im Hinblick auf Stadtplanungsaufgaben bewertet. Die Ergebnisse zeigen quantitativ die relativ große Hitzebelastung bei der Stadtstruktur Straßenschlucht, nach Süd exponiert, während im Stammraum des Fichtenhochwaldes selbst an heißen Sommertagen nahezu optimale Bedingungen herrschen. Zwischen diesen Extremen liegen die Ergebnisse für die anderen Meßplätze, wobei für Straßenschlucht, nach Nord exponiert die Wärmebelastung etwas höher als für Innenhof mit Bäumen ist.

---

---

With 6 Figures     

Hybrid modeling in meteorological applications Part I: Concepts and approaches

Summary Hybrid modeling entails the combination of a numerical weather prediction model and a symbolic model. The latter uses symbolic objects, their characterizing attributes and sets of behavioral constrains which prescribe changes in the states of these objects as functions of time, space, and other imposed quantitative or heuristic conditions. Integration of these two modeling components for an on-line, real-time, operational system is feasible only if both the numerical and the symbolic model can be executed in a distributed mode, i.e. at a user's location rather than in a central weather service office. This condition entails the design of a numerical model that can run on relatively inexpensive desktop workstations or high-end PCs. Given such a capability, the output from the numerical model can be used to satisfy a number of behavioral constraints of objects (such as thunderstorm, blizzard, etc.), defined in the symbolic model. These constraints can be embedded invisibly as functions of time and pixel location on the computer screen, to be called upon as soon as the respective object is activated, e.g. by placing an icon on the screen.To make such a hybrid weather prediction model responsive to details in topography, it will have to be able to interface with a geographic information system (GIS) database. Since such databases can be very voluminous, management procedures for indexing and rapid information retrieval have to be instituted. The approach discussed here involves restructuring of given GIS data into B+ trees.The hybrid prediction model whose design is described in this paper, executes very quickly on a PC (e.g. a 33 megahertz Intel 80486 chip based machine). It allows assimilation of locally generated observational data to improve forecast quality, and can respond to queries of a highly specialized nature in support of tactical decisions within the time frame between nowcasting (3 hours) and 24 hours.With 6 Figures     

Parameterizing turbulent diffusion through the joint probability density

The convective mass flux parameterization often used in meteorological modeling expresses the vertical flux of a transported scalar as proportional to the product of the difference in mean values of the scalar in updrafts and downdrafts and their characteristic velocity. The proportionality factor is a constant to be specified. We show that this proportionality factor also appears in the relaxed eddy accumulation technique of Businger and Oncley. That associates the surface-layer flux of a scalar with the product of the standard deviation of vertical velocity and the mean concentration difference between updrafts and downdrafts.We show that this constant (b) is determined uniquely by the joint probability density (jpd) of vertical velocity and the scalar. Using large-eddy simulation, we generate this jpd for a conservative scalar diffusing through a convective boundary layer. It has quite different forms in top-down and bottom-up diffusion geometries. The bottom-up jpd is fairly well represented by a jointly Gaussian form and implies b ~ 0.6, in good agreement with the surface-layer value reported by Businger and Oncley. The top-down jpd is strikingly non-Gaussian and gives b ~ 0.47. Updrafts carry the bulk of the scalar flux - 70% in the bottom-up case, 60% in the top-down case.The National Center for Atmospheric Research is sponsored by the National Science Foundation.     

Numerische Integrationen einer Gleichung für die turbulente Diffusion in der Atmosphäre

Zusammenfassung Es werden numerische Integrationen der dreidimensionalen Fickschen Diffusionsgleichung mit höhenabhängigen Diffusionskoeffizienten und Windgeschwindigkeit für den stationären Fall und eine kontinuierlich emittierende Punktquelle durchgeführt. Für die drei typischen Ausbreitungsverhältnisse Starke Durchmischung, Bodeninversion und Inversion über der Quelle, charakterisiert durch die Diffusionskoeffizienten und die Windgeschwindigkeit, werden die Einflüsse unterschiedlicher Quellhöhe, Sinkgeschwindigkeit und Ablagerungsgeschwindigkeit studiert.

---

Summary Numerical integrations of the threedimensional Fickean diffusion equation with height dependent diffusion coefficients and wind velocity are performed in the stationary case with a continuous point source. For the three typical cases strong mixing, surface inversion and inversion above the source characterized by the diffusion coefficients and wind velocity, the effects of source height, sinking velocity and deposition velocity are discussed.

---

Résumé Les auteurs ont procédé à l'intégration numérique de l'équation à trois dimensions de la diffusion, équation établie par Fick. Ils ont, pour cela, utilisé des coefficients de diffusion variant avec l'altitude et la vitesse du vent et distingué l'état stationnaire et le cas d'une source d'émission ponctuelle et continue. Ils étudient en outre les influences de hauteurs différentes de la source, de la rapidité de subsidence et de la vitesse de sédimentation. Ils ont tenu compte pour cela des trois conditions typiques de diffusion mélange très accentué, inversion au sol et inversion au-dessus de la source.

---

---

Mit 7 Textabbildungen     

Trace gas exchange at the air/water interface: Measurements of mass accommodation coefficients

A liquid jet of 90 m diameter and variable length has been utilized to determine absorption rates and, hence, mass accommodation coefficients , of atmospheric trace gases. The compounds investigated are HCl (0.01), HNO₃ (0.01), N₂O₅ (0.005), peroxyacetyl nitrate (>0.001), and HONO (0.005). It is concluded that the absorption of these trace gases by liquid atmospheric water is not significantly retarded by interfacial mass transport. The strengths and limitations of the liquid jet technique for measuring mass accommodation coefficients are explored.