Contraction induced by block rotation above salt (Angolan margin)

Gravity spreading above salt at passive margins is the major mode of deformation of post-salt sediments. Whereas this process generally creates a structural zoning, extensional upslope and contractional downslope, discrepancies can however arise. For example, evidence of contractional deformation occurs in the extensional domain of the Angolan margin, to the south of the Congo delta fan. Slope-parallel seismic lines show grabens, rollover and extensional diapirs. Conversely, strike-parallel seismic lines present inversion of early grabens, apparently related to a regional-scale decrease in sedimentary thickness away from the Congo delta. As the spreading rate and the characteristic spacing of structures are direct functions of sedimentary loading, one can expect structural changes along strike due to sedimentary thickness variations. This hypothesis was tested using spreading-type experiments of brittle-ductile models lying on top of an inclined rigid substratum. The experiments simulate the progradation of a synkinematic sedimentary cover above salt, with a lateral variation of sedimentation rate. The models show that the spreading rate was higher in the thicker part. Early grabens initiated perpendicular to the slope direction. Where sedimentation rate was high, they kept their orientation during spreading and formed purely extensional synsedimentary structures: Grabens, rollovers and diapirs. Where sedimentation rate was low, blocks separated by grabens rotated in a domino-type fashion but this domain continued to extend in a slope-parallel direction. Strike slip between blocks was entirely localised within the early grabens, which inverted and formed anticlines. Structures obtained in experiments are directly comparable to those in seismic lines of the Angolan margin. In both the Angolan margin examples and the laboratory experiments, block rotation is interpreted as slope-parallel strike-slip shear zones due to lateral variations in spreading rate.     

Salt tectonics and tear faulting in the central part of the Zagros Fold-Thrust Belt,Iran

The central part of the Zagros Fold-Thrust Belt is characterized by a series of right-lateral and left-lateral transverse tear fault systems, some of them being ornamented by salt diapirs of the Late Precambrian–Early Cambrian Hormuz evaporitic series. Many deep-seated extensional faults, mainly along N–S and few along NW–SE and NE–SW, were formed or reactivated during the Late Precambrian–Early Cambrian and generated horsts and grabens. The extensional faults controlled deposition, distribution and thickness of the Hormuz series. Salt walls and diapirs initiated by the Early Paleozoic especially along the extensional faults. Long-term halokinesis gave rise to thin sedimentary cover above the salt diapirs and aggregated considerable volume of salt into the salt stocks. They created weak zones in the sedimentary cover, located approximately above the former and inactive deep-seated extensional faults. The N–S to NNE–SSW direction of tectonic shortening during the Neogene Zagros folding was sub-parallel with the strikes of the salt walls and rows of diapirs. Variations in thickness of the Hormuz series prepared differences in the basal friction on both sides of the Precambrian–Cambrian extensional faults, which facilitated the Zagros deformation front to advance faster wherever the salt layer was thicker. Consequently, a series of tear fault systems developed along the rows of salt diapirs approximately above the Precambrian–Cambrian extensional faults. Therefore, the present surface expressions of the tear fault systems developed within the sedimentary cover during the Zagros orogeny. Although the direction of the Zagros shortening could also potentially reactivate the basement faults as strike-slip structures, subsurface data and majority of the moderate-large earthquakes do not support basement involvement. This suggests that the tear fault systems are detached on top of the Hormuz series from the deep-seated Precambrian–Cambrian extensional faults in the basement.     

Salt tectonics at passive margins: Geology versus models

Salt tectonics at passive margins is currently interpreted as a gravity-driven process but according to two different types of models: i) pure spreading only driven by differential sedimentary loading and ii) dominant gliding primarily due to margin tilt (slope instability). A comparative analysis of pure spreading and pure spreading is made using simple mechanics as well as available laboratory experiments and numerical models that consider salt tectonic processes at the whole basin scale. To be effective, pure spreading driven by sedimentary loading requires large differential overburden thicknesses and therefore significant water depths, high sediment density, low frictional angles of the sediments (high fluid pore pressure) and a seaward free boundary of the salt basin (salt not covered by sediments). Dominant gliding does not require any specific condition to be effective apart from the dip on the upper surface of the salt. It can occur for margin tilt angles lower than 1° for basin widths in the range of 200-600 km and initial sedimentary cover thickness up to 1 km, even in the absence of abnormal fluid pressure. In pure spreading, salt resists and sediments drive whereas in dominant gliding both salt and sediments drive. In pure spreading, extension is located inside the prograding sedimentary wedge and contraction at the tip. Both extension and contraction migrate seaward with the sedimentary progradation. Migration of the deformation can create an extensional inversion of previously contractional structures. In pure spreading, extension is located updip and contraction downdip. Extension migrates downdip and contraction updip. Migration of the deformation leads to a contractional inversion of previously extensional structures (e.g. squeezed diapirs). Mechanical analysis and modelling, either analogue or numerical, and comparison with margin-scale examples, such as the south Atlantic margins or northern Gulf of Mexico, indicate that salt tectonics at passive margins is dominated by dominant gliding down the margin dip. On the contrary, salt tectonics driven only by differential sedimentary loading is a process difficult to reconcile with geological evidence.     

Extensional rise and fall of a salt diapir in the Sørvestsnaget Basin,SW Barents Sea

Regional extension which initiates and promotes the rise of salt diapirs can also make diapirs fall once the supply of salt from its source is restricted. New observations on the 3D seismic data from a salt diapir in the Sørvestsnaget Basin suggest that salt moves until the end of the Eocene and is subtle to minor readjustments afterwards, revealing a more complex kinematics that previously described. Observations such as salt horns and sags and an antithetic fault linked to the western flank of the diapir suggest that salt syn-kinematics during Middle-Late Eocene included passive rising of the salt, followed by a fall. The salt horns are remnants of a taller salt diapir that, together with the indentation of the Middle-Late Eocene syn-kinematic sediment overburden above the salt, indicate diapiric fall due to restriction of salt supply by extension. Post-kinematic readjustments did not include diapiric reactivation by tectonic compression as previously thought, but minor salt rise by shortening due to gravity gliding after the tilting of the margin during Plio-Pleistocene glacial sediment loading and differential compaction of surrounding sediments. The salt diapir appears to be presently inactive and salt supply may have been restricted from its source already since Late Eocene.     

Style and timing of salt tectonics in the Dniepr-Donets Basin (Ukraine): implications for triggering and driving mechanisms of salt movement in sedimentary basins

The Ukrainian Dniepr-Donets Basin (DDB) is a Late Palaeozoic intracratonic rift basin, with sedimentary thicknesses up to 19 km, displaying the effects of salt tectonics during its entire history of formation, from Late Devonian rifting to the Tertiary. Hundreds of concordant and discordant salt structures formed during this time. It is demonstrated in this paper that the variety of styles of salt structure formation in the DDB provide important constraints on understanding the triggering and driving mechanisms of salt kinematics in sedimentary basins in general. Salt movement in the DDB began during the Devonian syn-rift phase of basin development and exerted controls on the later distribution of salt structures though the geometry of basement faults is not directly responsible for the regular spacing of salt structures. Post-rift salt movements in the DDB occurred episodically. Episodes of salt movement were triggered by tectonic events, specifically two extensional events during the Carboniferous, an extensional reactivation at the end of Carboniferous–earliest Permian, and a compressional event at the end of the Cretaceous. Extensional events that induced salt movement were ‘thick-skinned’ (i.e. basement involved in deformation) rather than ‘thin-skinned’. Most overburden deformation related to salt movements is ductile regardless of sedimentary bulk lithology and degree of diagenesis, while the deformation of sedimentary cover in areas where salt is absent is mainly brittle. This implies that the presence of salt changes the predominant mode of deformation of overlying sedimentary rocks. Episodes of salt movement lasted longer than the periods of active tectonics that initiated them. Buoyancy, erosion, and differential loading all played a role in driving halokinesis once tectonic forces had pushed the salt-overburden system into disequilibrium; among these factors, erosion of overburden above growing salt structures acted as a key self-renewing force for development of salt diapirs. Very high sedimentation rates (related to high post-rift tectonic subsidence rates), particularly during the Carboniferous, were able to bury diapirs and to load salt bodies such that buoyancy, erosion, and differential loading forces eventually became insufficient to continue driving diapirism—until the system was perturbed by an ensuing tectonic event. In contrast, some salt anticlines and diapirs developed continuously during the entire Mesozoic because of much-reduced tectonic subsidence rates (and sedimentation supply) during this time. However, a Lower Permian salt series and overhangs of buried diapirs played an important role in preventing overburden piercing (and fracturing) during the Mesozoic and, specifically, during the Late Cretaceous salt diapirism phase.     

Structural controls on the formation of BSR over a diapiric anticline from a dense MCS survey offshore southwestern Taiwan

A dense seismic reflection survey with up to 250-m line-spacing has been conducted in a 15 × 15 km wide area offshore southwestern Taiwan where Bottom Simulating Reflector is highly concentrated and geochemical signals for the presence of gas hydrate are strong. A complex interplay between north–south trending thrust faults and northwest–southeast oblique ramps exists in this region, leading to the formation of 3 plunging anticlines arranged in a relay pattern. Landward in the slope basin, a north–south trending diapiric fold, accompanied by bright reflections and numerous diffractions on the seismic profiles, extends across the entire survey area. This fold is bounded to the west by a minor east-verging back-thrust and assumes a symmetric shape, except at the northern and southern edges of this area, where it actively overrides the anticlines along a west-verging thrust, forming a duplex structure. A clear BSR is observed along 67% of the acquired profiles. The BSR is almost continuous in the slope basin but poorly imaged near the crest of the anticlines. Local geothermal gradient values estimated from BSR sub-bottom depths are low along the western limb and crest of the anticlines ranging from 40 to 50 °C/km, increase toward 50–60 °C/km in the slope basin and 55–65 °C/km along the diapiric fold, and reach maximum values of 70 °C/km at the southern tip of the Good Weather Ridge. Furthermore, the local dips of BSR and sedimentary strata that crosscut the BSR at intersections of any 2 seismic profiles have been computed. The stratigraphic dips indicated a dominant east–west shortening in the study area, but strata near the crest of the plunging anticlines generally strike to southwest almost perpendicular to the direction of plate convergence. The intensity of the estimated bedding-guided fluid and gas flux into the hydrate stability zone is weaker than 2 in the slope basin and the south-central half of the diapiric fold, increases to 7 in the northern half of the diapiric fold and plunging anticlines, and reaches a maximum of 16 at the western frontal thrust system. Rapid sedimentation, active tectonics and fluid migration paths with significant dissolved gas content impact on the mechanism for BSR formation and gas hydrate accumulation. As we begin to integrate the results from these studies, we are able to outline the regional variations, and discuss the importance of structural controls in the mechanisms leading to the gas hydrate emplacements.     

The structural styles and formation mechanism of salt structures in the Southern Precaspian Basin: Insights from seismic data and analog modeling

Using the seismic profiles and analog modeling, this paper addresses the salt structures in the M and B blocks in the Southern Precaspian Basin. The salt structural features, the formation mechanism and the controlling factors of structural deformation are investigated and discussed systematically. The interpretation of the seismic profiles shows that typical salt-related structures include salt wall, (flip-flop) salt diapir, salt roller, salt pillow (dome), salt weld, salt withdrawal minibasin and drag structure (or drape fold). In addition, model results demonstrate that the gravity spreading driven by progradation and aggradation is probably the primary factor in controlling the formation of the salt structures in the research area. Due to the differential loading driven by progradation, passive salt diapir developed near the progradational front followed by the formation of intrasalt withdrawal minibasin bounded by two salt diapirs, and secondary reactive triangle salt diapir or salt pillow might form within the intrasalt withdrawal minibasin. Model results also indicate that the pattern of the subsalt basement has important influence on the formation and evolution of salt structures. Salt diapirs primarily developed along the margin of the subsalt uplift basement, where high shear deformation was induced by differential sedimentary loading between the uplift area and the slope area.     

Isochores and 3-D visualization of rising and falling slat diapirs

Diapir fall, which was predicted by physical models, has been identified in salt provinces, such as the South Atlantic margins, the North Sea, and the Paradox Basin (Colorado–Utah). However the 3-D geometry of falling diapirs and their country rock is still poorly understood. 3-D visualization and isochore patterns from a physical model help elucidate this geometry.The model initially comprised a unit of viscous silicone overlain by a prekinematic sand unit. Sand units representing brittle sediments were deposited episodically during gravity gliding and spreading. Regional extension triggered and eventually widened salt walls, causing them to sag. The 3-D visualization shows that regional hydrocarbon migration, which tends to be seaward during diapir rise and landward during diapir fall, can potentially be orthogonal to local migration along grabens at soft-linked zones of relay ramps. Furthermore, anticlinal culminations may form (1) in horsts that bend along strike and (2) adjoining the fork of Y-shaped salt walls.Sequential isochore maps of the overburden show how patterns of sedimentation, deformation, and underlying salt thickness changed through time. Isochores of prekinematic units record only strain: thinned belts record early extension. In contrast, isochores of synkinematic units record mostly thickness variations due to deposition on actively deforming topography. Isochores above sagging diapirs identify the thickest part of crestal depocenters, where the most rapid sagging occurred in regions of maximum extension near the unbuttressed downdip part of the gravity-spreading system. Additionally, asymmetric isochore patterns may reveal underlying half-grabens or tilted symmetric grabens. In relay systems, overlying isochores may indicate which part of a salt wall rose to compensate for sagging elsewhere in the relay.     

Interaction between diapirism and sediment loading at the shelf-slope boundary,northwest Gulf of Mexico

During the last low stand of sea level, rivers and streams drained across the present northwestern Gulf of Mexico continental shelf depositing sediments in several shallow-water deltas near the present shelf-slope boundary. The weight of these wedges of prograded sediments triggered or augmented both subsidence of local depositional basins and upward movement of diapiric material around the basin edges. A depositional basin off the southwestern Louisiana coast records migration of the basinal axis during late Pleistocene and Holocene time indicating relative growth of diapirs along the basin margin throughout the most recent geological record.     

Salt diapirs in the Dead Sea basin and their relationship to Quaternary extensional tectonics

Regional extension of a brittle overburden and underlying salt causes differential loading that is thought to initiate the rise of reactive diapirs below and through regions of thin overburden. We present a modern example of a large salt diapir in the Dead Sea pull-apart basin, the Lisan diapir, which we believe was formed during the Quaternary due to basin transtension and subsidence. Using newly released seismic data that are correlated to several deep wells, we determine the size of the diapir to be 13×10 km, its maximum depth 7.2 km, and its roof 125 m below the surface. From seismic stratigraphy, we infer that the diapir started rising during the early to middle Pleistocene as this section of the basin underwent rapid subsidence and significant extension of the overburden. During the middle to late Pleistocene, the diapir pierced through the extensionally thinned overburden, as indicated by rim synclines, which attest to rapid salt withdrawal from the surrounding regions. Slight positive topography above the diapir and shallow folded horizons indicate that it is still rising intermittently. The smaller Sedom diapir, exposed along the western bounding fault of the basin is presently rising and forms a 200 m-high ridge. Its initiation is explained by localized E–W extension due monoclinal draping over the edge of a rapidly subsiding basin during the early to middle Pleistocene, and its continued rise by lateral squeezing due to continued rotation of the Amazyahu diagonal fault.     

Structural and facies architecture of a diapir-related carbonate minibasin (lower and middle Jurassic,High Atlas,Morocco)

We report the structural geometry and facies architecture of a small diapir-related carbonate-dominated basin from the Jurassic rift of the Moroccan High Atlas. The Azag minibasin is a lozenge-shaped depocenter completely enclosed by tectonic boundaries that we interpret as welds after former salt anticlines or salt walls. The exposed ca. 3000 m-thick infill of the Azag minibasin is asymmetric; layers are tilted to the W defining a rollover geometry. Areally-restricted sedimentary discontinuities and wedges of growth strata near the basin margins indicate sedimentation contemporaneous with diapiric rise of a Triassic ductile layer. Facies evolution through the basin reflects local accommodation by salt withdrawal and regional events in the High Atlas rift. The early basin infill in the Sinemurian and Pliensbachian shows thickness variations indicative of low-amplitude halokinetic movements, with reduced exposed thicknesses compared to surrounding areas. The exposed Toarcian and Aalenian deposits are also reduced in thickness compared to areas outside the basin. Subsidence increased dramatically in the Bajocian-early Bathonian (?), the main phase of downbuilding, when over 2600 m of carbonates and shales accumulated at a rate > 0.5 mm/a in the depocentral area of the minibasin governed by W-directed salt expulsion. The stratigraphic units distinguished often show maximum thicknesses and deeper facies in the depocentral area, and rapidly change to shallower facies at the basin margins. The Bajocian carbonate facies assemblage of the minibasin include: reservoir facies as microbialite-coral reefs in the basin margins (formed during periods of strong diapir inflation and bathymetric relief), basin-expansive oolite bars (formed during episodes of subdued relief), and organic-rich, dark lime mudstones and shales that show source-rock characteristics. The Azag basin is a good analog for the exploration of salt-related carbonate plays in rifts and continental margins where source-rock and reservoir can form in a same minibasin.     

Stress and pore pressure histories in complex tectonic settings predicted with coupled geomechanical-fluid flow models

Most of the methods currently used for pore pressure prediction in sedimentary basins assume one-dimensional compaction based on relationships between vertical effective stress and porosity. These methods may be inaccurate in complex tectonic regimes where stress tensors are variable. Modelling approaches for compaction adopted within the geotechnical field account for both the full three-dimensional stress tensor and the stress history. In this paper a coupled geomechanical-fluid flow model is used, along with an advanced version of the Cam-Clay constitutive model, to investigate stress, pore pressure and porosity in a Gulf of Mexico style mini-basin bounded by salt subjected to lateral deformation. The modelled structure consists of two depocentres separated by a salt diapir. 20% of horizontal shortening synchronous to basin sedimentation is imposed. An additional model accounting solely for the overpressure generated due to 1D disequilibrium compaction is also defined. The predicted deformation regime in the two depocentres of the mini-basin is one of tectonic lateral compression, in which the horizontal effective stress is higher than the vertical effective stress. In contrast, sediments above the central salt diapir show lateral extension and tectonic vertical compaction due to the rise of the diapir. Compared to the 1D model, the horizontal shortening in the mini-basin increases the predicted present-day overpressure by 50%, from 20 MPa to 30 MPa. The porosities predicted by the mini-basin models are used to perform 1D, porosity-based pore pressure predictions. The 1D method underestimated overpressure by up to 6 MPa at 3400 m depth (26% of the total overpressure) in the well located at the basin depocentre and up to 3 MPa at 1900 m depth (34% of the total overpressure) in the well located above the salt diapir. The results show how 2D/3D methods are required to accurately predict overpressure in regions in which tectonic stresses are important.     

Oligocene to Lower Pliocene deposits of the Norwegian continental shelf,Norwegian Sea,Svalbard, Denmark and their relation to the uplift of Fennoscandia: A synthesis

This study provides the results of the first integrated study of Oligocene–Pliocene basins around Norway.Within the study area, three main depocentres have been identified where sandy sediments accumulated throughout the Oligocene to Early Pliocene period. The depocentre in the Norwegian–Danish Basin received sediments from the southern Scandes Mountains, with a general progradation from north to south during the studied period. The depocentre in the basinal areas of the UK and Norwegian sectors of the North Sea north of 58°N received sediments from the Scotland–Shetland area. Because of the sedimentary infilling there was a gradual shallowing of the northern North Sea basin in the Oligocene and Miocene. A smaller depocentre is identified offshore northern Nordland between Ranafjorden (approximately 66°N) and Vesterålen (approximately 68°N) where the northern Scandes Mountains were the source of the Oligocene to Early Pliocene sediments. In other local depocentres along the west coast of Norway, sandy sedimentation occurred in only parts of the period. Shifts in local depocentres are indicative of changes in the paleogeography in the source areas.In the Barents Sea and south to approximately 68°N, the Oligocene to Early Pliocene section is eroded except for distal fine-grained and biogenic deposits along the western margin and on the oceanic crust. This margin was undergoing deformation in a strike-slip regime until the Eocene–Oligocene transition. The Early Oligocene sediments dated in the Vestbakken Volcanic Province and the Forlandssundet Basin represent the termination of this strike-slip regime.The change in the plate tectonic regime at the Eocene–Oligocene transition affected mainly the northern part of the study area, and was followed by a quiet tectonic period until the Middle Miocene, when large compressional dome and basin structures were formed in the Norwegian Sea. The Middle Miocene event is correlated with a relative fall in sea level in the main depocentres in the North Sea, formation of a large delta in the Viking Graben (Frigg area) and uplift of the North and South Scandes domes. In the Norwegian–Danish Basin, the Sorgenfrei-Tornquist Zone was reactivated in the Early Miocene, possibly causing a shift in the deltaic progradation towards the east. A Late Pliocene relative rise in sea level resulted in low sedimentation rates in the main depositional areas until the onset of glaciations at about 2.7 Ma when the Scandes Mountains were strongly eroded and became a major source of sediments for the Norwegian shelf, whilst the Frigg delta prograded farther to the northeast.     

莺歌海盆地泥底辟发育演化与天然气及CO2运聚成藏规律

泥底辟是南海北部边缘西区莺歌海盆地颇具特色的地震地质异常体,具有低密、低速及高温高压特征,其发育演化及所伴生的热流体上侵活动与天然气及CO2运聚分布乃至富集成藏均密切相关。将莺歌海盆地泥底辟划分为"深埋型"(低幅度弱-中能量泥底辟)、"浅埋型"(高幅度中-强能量泥底辟)及"喷口型"(高幅度特强能量泥底辟)三大类进行研究。研究表明,晚期泥底辟及热流体活动不仅为浅层天然气及CO2运聚成藏提供了纵向的高速运移通道和运聚动力条件,促使深部天然气及CO2向浅层大量运移聚集,而且导致盆地具有烃源岩早熟、天然气运聚供大于散的晚期动平衡成藏,以及泥底辟热流体上侵活动控制天然气及CO2运聚规律之特点。     

Possible diapirs in the gulf of Elat,Southern Dead Sea rift

Elongate trending diapiric structures occur along faulted rifts in the Gulf of Elat. Those diapirs in the southern part of the Gulf, believed to be of salt origin were formed in the embryonic continental margin during the separation of the Nubian and Arabian plates. The diapirs farther to the north are believed to be of shale origin. These findings support other recent geological evidence suggesting that the tectonic regime in the region is obliquely extensional. Comparison with the structure of the Suez Rift indicates a jump of the northern extension of the Red Sea spreading center during the early Pliocene period.     

Geophysical evidence of mud diapirism on the Mediterranean Ridge accretionary complex

Mud volcanoes, mud cones, and mud ridges have been identified on the inner portion of the crestal area, and possibly on the inner escarpment, of the Mediterranean Ridge accretionary complex. Four areas containing one or more mud diapirs have been investigated through bathymetric profiling, single channel seismic reflection profiling, heat flow measurements, and coring. A sequence of events is identified in the evolution of the mud diapirs: initially the expulsion on the seafloor of gasrich mud produces a seafloor depression outlined in the seismic record by downward dip of the host sediment reflectors towards the mud conduit; subsequent eruptions of fluid mud may create a flat topped mud volcano with step-like profile; finally, the intrusion of viscous mud produces a mud cone.The origin of the diapirs is deep within the Mediterranean Ridge. Although a minimum depth of about 400 m below the seafloor has been computed from the hydrostatic balance between the diapiric sediments and the host sediments, a maximum depth, suggested by geometric considerations, ranges between 5.3 and 7 km. The presence of thermogenic gas in the diapiric sediments suggests a better constrained origin depth of at least 2.2 km.The heat flow measured within the Olimpi mud diapir field and along a transect orthogonal to the diapiric field is low, ranging between 16 ± 5 and 41 ± 6 mW m^–2. Due to the presence of gas, the thermal conductivity of the diapiric sediments is lower than that of the host hemipelagic oozes (0.6–0.9 and 1.0–1.15 W m^–1 K^–1 respectively).We consider the distribution of mud diapirs to be controlled by the presence of tectonic features such as reverse faults or thrusts (inner escarpment) that develop where the thickness of the Late Miocene evaporites appears to be minimum. An upward migration through time of the position of the décollement within the stratigraphic column from the Upper Oligocene (diapiric sediments) to the Upper Miocene (present position) is identified.     

Pliocene�CQuaternary contourites along the northern Gulf of Cadiz margin: sedimentary stacking pattern and regional distribution

This study reports novel findings on the Pliocene?CQuaternary history of the northern Gulf of Cadiz margin and the spatiotemporal evolution of the associated contourite depositional system. Four major seismic units (P1, P2, QI and QII) were identified in the Pliocene?CQuaternary sedimentary record based on multichannel seismic profiles. These are bounded by five major discontinuities which, from older to younger, are the M (Messinian), LPR (lower Pliocene revolution), BQD (base Quaternary discontinuity), MPR (mid-Pleistocene revolution) and the actual seafloor. Unit P1 represents pre-contourite hemipelagic/pelagic deposition along the northern Gulf of Cadiz margin. Unit P2 reflects a significant change in margin sedimentation when contourite deposition started after the Early Pliocene. Mounded elongated and separated drifts were generated during unit QI deposition, accompanied by a general upslope progradation of drifts and the migration of main depocentres towards the north and northwest during both the Pliocene and Quaternary. This progradation became particularly marked during QII deposition after the mid-Pleistocene (MPR). Based on the spatial distribution of the main contourite depocentres and their thickness, three structural zones have been identified: (1) an eastern zone, where NE?CSW diapiric ridges have controlled the development of two internal sedimentary basins; (2) a central zone, which shows important direct control by the Guadalquivir Bank in the south and an E?CW Miocene palaeorelief structure in the north, both of which have significantly conditioned the basin-infill geometry; and (3) a western zone, affected in the north by the Miocene palaeorelief which favours deposition in the southern part of the basin. Pliocene tectonic activity has been an important factor in controlling slope morphology and, hence, influencing Mediterranean Outflow Water pathways. Since the mid-Pleistocene (MPR), the sedimentary stacking pattern of contourite drifts has been less affected by tectonics and more directly by climatic and sea-level changes.     

The structure and formation of diapirs in the Yinggehai-Song Hong Basin, South China Sea

The occurrence of shale diapirs in the Yinggehai-Song Hong (YGH-SH) Basin is well documented, as is their association with big petroleum fields. In order to better understand how and why the diapirs form we performed a detailed geophysical analysis using a new regional compilation of high-resolution two- and three-dimensional seismic reflection data, as well as drilling data that cover the diapirs in YGH-SH Basin. As many as 18 diapirs were identified and are arranged in six N-S-striking vertical en échelon zones. On seismic reflection sections gas chimney structures, diapiric faults and palaeo-craters are genetically linked with the process of diapirism. Here we use geophysical and geological observations to propose a three-stage model for diapirism: initiation, emplacement, and collapse. During these three stages, different diapiric structure styles are formed, which we describe in detail. These include buried diapirs, piercing diapirs and collapsed diapirs. We link the diapirism to activity on the offshore continuation of the Red River Fault, as shown on our high-resolution seismic reflection data, which is also related to a high paleogeothermal gradient caused by crustal thinning. We also recognize the role of loading by the very large volume of sediment eroded from the edges of the Tibetan Plateau and delivered by the Red River to the basin.     

Modeling stress evolution around a rising salt diapir

We model the evolution of a salt diapir during sedimentation and study how deposition and salt movement affect stresses close to the diapir. We model the salt as a solid visco-plastic material and the sediments as a poro-elastoplastic material, using a generalized Modified Cam Clay model. The salt flows because ongoing sedimentation increases the average density within the overburden sediments, pressurizing the salt. Stresses rotate near a salt diapir, such that the maximum principal stress is perpendicular to the contact with the salt. The minimum principal stress is in the circumferential direction, and drops near the salt. The mean stress increases near the upper parts of the diapir, leading to a porosity that is lower than predicted for uniaxial burial at the same depth. We built this axisymmetric model within the large-strain finite-element program Elfen. Our results highlight the fact that forward modeling can provide a detailed understanding of the stress history of mudrocks close to salt diapirs; such an understanding is critical for predicting stress, porosity, and pore pressure in salt systems.     

Carbonate platforms in wedge-top basins: An example from the Gunung Mulu National Park,Northern Sarawak (Malaysia)

The Melinau carbonate platform initiated during the Mid-Eocene on a rotating slice of the Rajang accretionary prism. The differential sedimentary loading enhanced a rotation of the mobile substratum and created an elongated, asymmetrical wedge-top basin. The extensional southern margin of the basin consists of a 2100–2200-m-thick section of Eocene-to-Oligocene carbonates. These thin laterally towards the northern margin of the basin, where a carbonate factory was active on a postulated underlying thrust. Backstepping and dismemberment of the carbonate system started during the latest Oligocene and deep-marine sedimentation became prevalent over the entire region during the Early Miocene.