大跨桥梁结构损伤诊断与安全评估的多尺度有限元模拟研究

探讨了以结构损伤诊断与安全评估为目标的大跨桥梁结构多尺度有限元模拟的策略与方案。在有限元模型误差来源分析的基础上,提出了大跨桥梁结构模型误差的分层次修正方法。通过对润扬长江大桥斜拉桥的有限元建模和模型修正过程,提出了大跨斜拉桥结构以损伤诊断与安全评估为目标的多尺度有限元模拟方法。研究表明,大跨桥梁结构的多尺度有限元模拟必须建立在模型误差分析的基础上,并采用模型误差的分层次修正方法才能较好的满足多尺度有限元模拟的技术要求。     

基于响应面的预应力混凝土桥动力有限元模型研究

建立了基于正交实验的响应面模型和精细有限元模型,并将其用于中华大桥的有限元模型修正,通过实测动力数据对修正后的有限元模型计算结果进行了验证。基于修正后的有限元模型,分析了预应力对预应力钢筋混凝土桥梁模态信息（频率和振型）的影响,以及单元类型对桥梁模态频率的影响。结果表明,修正后的有限元模型能够比较准确地反映桥梁实际结构的动力特性,基于响应面模型和遗传算法的修正方法可有效地用于大桥的健康监测和状态评估;预应力对预应力钢筋混凝土桥梁模态信息的影响较小,建模时可不予精确考虑;对于由多根预应力混凝土梁组成的桥梁体系,采用实体单元分析较好。     

佛开高速九江大桥模态测试与分析

对主跨为160m的预应力砼变截面连续梁桥佛开高速九江大桥进行了理论与实验模态分析．首先介绍了环境激励条件下现场模态测试布置及过程,利用随机子空间法（SSI）进行了桥梁模态参数识别．建立了桥梁有限元模型．并对理论和实验模态分析结果进行了比较和讨论。实验与有限元计算结果在竖向模态频率及振型上总体吻合较好。测试结果可以为有限元模型修正提供依据：模态测试与有限元分析相结合．可以为桥梁长期健康监测和损伤评估提供较可靠的基准模型。     

混合体系多塔矮塔斜拉桥推倒分析的适用性研究

为了研究推倒分析求解混合体系矮塔斜拉桥地震响应的适用性,以某混合体系多塔矮塔斜拉桥为工程背景,采用SAP2000建立空间有限元模型,分别对桥梁结构进行弹性和弹塑性推倒分析,探究在多塔矮塔斜拉桥地震分析中传统推倒和模态推倒的优劣及结构在塑性状态下不同计算方法的精确程度.结果表明:在弹性状态下,混合体系矮塔斜拉桥顺桥向和横...     

大跨度预应力混凝土连续刚构桥的动力特性分析

介绍了福建泉州后渚大桥——大跨度预应力混凝土连续刚构桥的现场环境振动实验．并利用频域中的单模态识别法(SDOFI)、峰值法(PP)和时域中的随机子空间识别法(SSI)分别进行桥梁动力特性识别。利用ANSYS建立了全桥三维有限元模型并进行了理论模态分析,基于参数分析和环境振动测试结果对有限元模型进行了标定,建立了该桥的基准有限元模型,该模型可服务于桥梁长期健康监测与状态评估。     

香港青马大桥在交通荷载作用下的疲劳评估

在全桥三维有限元模型基础上 ,进行了车载响应分析 ,得到全桥的动力响应 ,并与实测结果进行了分析对比 ;对疲劳危险部位建立局部有限元模型 ,并进行了局部应力分析。在结构健康安全监测系统实测数据基础上 ,得到应变循环标准块 ,用基于热点应力疲劳评估方法对危险部位进行了疲劳寿命评估。     

基于振动台试验的RC框架模型修正及模拟损伤识别

利用有限元模型修正技术综合利用理论建模和实验建模的优点,可以得到更加符合结构实际的基准模型,为结构动力分析、损伤诊断及健康监测提供更可靠的依据。基于一12层钢筋混凝土框架模型振动台试验测点加速度记录,采用特征系统实现算法对该模型结构进行模态参数识别,识别结果与有限元分析结果之间存在明显的差异。采用基于灵敏度分析的参数型有限元模型修正技术,选择识别精度较高的实测模态频率为修正基准,以构件的弹性模量和密度为修正参数,对该框架的初始有限元模型进行了修正,得到基准有限元模型。进一步以基准有限元模型为标准,以构件弹性模量的降低模拟结构的损伤,对两种假设工况下的损伤结构进行修正,得到构件弹性模量的变化值并与假设的降低值对比,验证了有限元模型修正技术在结构损伤识别中应用的可行性。     

香港青马大桥交通荷载作用下的疲劳评估

在全桥三维有限元模型基础上，进行了车载响应分析，得到全桥的动力响应，并与实测结果进行了分析对比，对疲劳危险部位建立局部有限元模型，并进行了局部应力分析。在结构健康安全监测系统实测数据基础上，得到应变循环标准块，用基于热点应力疲劳评估方法对危险部位进行了疲劳寿命评估。     

基于环境振动的斜拉桥拉索基频识别

斜拉索是现代斜拉桥最重要的结构构件，索力在斜拉桥的施工控制和长期监测中起着重要作用。振动测试法是斜拉桥索力测定、监测和状态评估中应用最广泛的一种方法。振动法测索力的关键在于准确地识别出索的基频。本文使用自功率谱和倒频谱方法，基于MATLAB平台，开发出了斜拉桥拉索环境振动模态分析图形用户交互(GUI)工具箱，实现了斜拉索基频的快速自动识别。应用本文的方法，对福州青洲闽江主跨605m斜拉桥拉索的环境振动实测加速度数据进行了分析处理，斜拉索基频识别方便直观，结果可靠。     

改进曲率模态识别桥梁损伤位置方法研究

结构健康监测和结构状态评估的主要前提之一是结构损伤识别。基于曲率模态对结构局部损伤比较敏感和频率指标测试简单方便、精度高的特点,本文提出了一种以结构的曲率模态为基础,综合考虑频率的变化的改进的结构损伤识别方法。随机子空间方法是一种行之有效的基于环境激励的结构状态识别方法。该方法的主要优点是无需人工激励,不中断桥梁的运营。为此,论文提出了一种不中断桥梁运营的基于改进曲率模态的桥梁结构损伤识别方法。最后用一三跨连续梁的有限元模型对该改进方法进行了验证。结果表明,采用随机子空间结合改进的曲率模态方法可以在不中断桥梁运营的前提下有效地识别出桥梁的损伤状况。     

Hanger replacement influence on seismic response of suspension bridges: Implementation to the Bosphorus Bridge subjected to multi-support excitation

The effects of hanger replacement from inclined to vertical configuration on seismic response of long-span suspension bridges are investigated considering multi-support earthquake excitation. The Bosphorus Bridge is investigated due to its recent comprehensive rehabilitation, mainly involving hanger replacement. The finite-fault stochastic simulation method (FINSIM) is utilized for multi-point earthquake time-history generation. The developed finite element (FE) model both for the inclined and vertical hanger arrangement are verified through the structural health monitoring (SHM) data. Based on the comparative analysis, the tension force of vertical hangers is found to be lower than that of inclined hangers, whereas the tension force of the main and back-stay cables remains the same. The compressive axial force of the deck decreases relatively in the case of the vertical hanger arrangement, whereas the cross-sectional forces at the tower base section increase. The approach viaducts are not affected by the vertical hanger arrangement. According to the demand/capacity ratios for damage estimation under the max. earthquake (2475 years return period), structural damage on the tower base section may be expected for both hanger arrangements, while these sections perform well under design scenario earthquake. The expansion joint of the bridge with inclined hangers is also estimated to be damaged; however, this displacement is lower in the case of the vertical hanger arrangement due to the viscous dampers. The findings also reveal that a change in hanger form of a suspension bridge can necessitate other structural retrofit, such as using viscous dampers to limit longitudinal displacements of the deck and retrofitting the bridge towers.     

Structural health monitoring of long-span suspension bridges using wavelet packet analysis

During the service life of civil engineering structures such as long-span bridges, local damage at key positions may continually accumulate, and may finally result in their sudden failure. One core issue of global vibration-based health monitoring methods is to seek some damage indices that are sensitive to structural damage. This paper proposes an online structural health monitoring method for long-span suspension bridges using wavelet packet transform (WPT). The WPT- based method is based on the energy variations of structural ambient vibration responses decomposed using wavelet packet analysis. The main feature of this method is that the proposed wavelet packet energy spectrum (WPES) has the ability to detect structural damage from ambient vibration tests of a long-span suspension bridge. As an example application, the WPES-based health monitoring system is used on the Runyang Suspension Bridge under daily environmental conditions. The analysis reveals that changes in environmental temperature have a long-term influence on the WPES, while the effect of traffic loadings on the measured WPES of the bridge presents instantaneous changes because of the nonstationary properties of the loadings. The condition indication indices VD reflect the influences of environmental temperature on the dynamic properties of the Runyang Suspension Bridge. The field tests demonstrate that the proposed WPES-based condition indication index VD is a good candidate index for health monitoring of long-span suspension bridges under ambient excitations.     

双层板桁钢梁应力分析

以跨度最大的双层斜拉桥闵浦大桥为背景,研究了双层板桁钢梁桥面板的受力特性,阐述了精细壳单元与梁单元结合的整体有限元模型,并分析了上、下桥面间腹杆的受力特性与桥面板的应力分布特性;采用桥面纵横梁间带U肋精细桥面模型,分析了桥面板和U肋在车辆荷载作用下的应力分布。研究表明,上、下层桥面横桥向应力小于纵桥向应力,并且横桥向应力的不均匀性明显大于纵桥向;车轮荷载作用下,正交异性桥面板应力分析时,荷载位置对纵横向应力峰值的影响很小,并且横桥向应力起控制作用,峰值均出现在U肋与顶板交接处。     

Non-linear buffeting response analysis of long-span suspension bridges with central buckle

The rigid central buckle employed in the Runyang Suspension Bridge (RSB) was the first time it was used in a suspension bridge in China. By using a spectral representation method and FFT technique combined with measured data,a 3D fluctuating wind field considering the tower wind effect is simulated. A novel FE model for buffeting analysis is then presented,in which a specific user-defined Matrix27 element in ANSYS is employed to simulate the aeroelastic forces and its stiffness or damping matrices are parameterized by wind velocity and vibration frequency. A nonlinear time history analysis is carried out to study the influence of the rigid central buckle on the wind-induced buffeting response of a long-span suspension bridge. The results can be used as a reference for wind resistance design of long-span suspension bridges with a rigid central buckle in the future.     

天兴洲公铁两用斜拉桥主梁纵向列车制动振动反应分析

本文对天兴洲公铁两用斜拉桥主梁纵向列车制动的振动反应进行了研究。天兴洲大桥是目前在建的世界上跨度最大的公铁两用斜拉桥,由于具有四线铁路,其主梁在列车制动及行车移动荷载作用下会沿纵向产生大幅振动,因此对其列车制动及行车移动荷载反应进行研究尤为必要。文中,首先根据车辆动力学的原理建立了列车制动动力学模型,获得了列车制动力纵向荷载及在制动过程中列车行走所产生的竖向荷载,并建立制动力传递有限元模型,应用有限元分析软件来获取钢轨上制动力及列车行走时引起的桥梁结构节点上的作用力时程。最后对天兴洲公铁两用斜拉桥主梁纵向列车制动及行车移动荷载的振动反应进行了仿真分析,发现了其主梁纵向列车制动反应具有位移大且速度极小的特点。     

Modelling of shear keys in bridge structures under seismic loads

Shear keys are used in the bridge abutments and piers to provide transverse restraints for bridge superstructures. Owing to the relatively small dimensions compared to the main bridge components (girders, piers, abutments, piles), shear keys are normally regarded as secondary component of a bridge structure, and their influences on bridge seismic responses are normally neglected. In reality, shear keys are designed to restrain the lateral displacements of bridge girders, which will affect the transverse response of the bridge deck, thus influence the overall structural responses. To study the influences of shear keys on bridge responses to seismic ground excitations, this paper performs numerical simulations of the seismic responses of a two-span simply-supported bridge model without or with shear keys in the abutments and the central pier. A detailed 3D finite element (FE) model is developed by using the explicit FE code LS-DYNA. The bridge components including bridge girders, piers, abutments, bearings, shear keys and reinforcement bars are included in the model. The non-linear material behaviour including the strain rate effects of concrete and steel rebar are considered. The seismic responses of bridge structures without and with shear keys subjected to bi-axial spatially varying horizontal ground motions are calculated and compared. The failure mode and damage mechanism of shear keys are discussed in detail. Numerical results show that shear keys restrain transverse movements of bridge decks, which influence the torsional–lateral responses of the decks under bi-axial spatially varying ground excitations; neglecting shear keys in bridge response analysis may lead to inaccurate predictions of seismic responses of bridge structures.     

Cost-effective analysis technique for the design of bridges against strike-slip faulting

The paper studies the performance of a typical overpass bridge, with continuous deck and monolithic pier-deck connections, subjected to strike-slip faulting. A three-dimensional (3D) finite element (FE) model of the entire bridge–foundation–abutment–soil system is developed, accounting for soil, structure and geometric nonlinearities. Soil behaviour is simulated with a thoroughly validated strain softening constitutive model. The concrete damaged plasticity (CDP) model is implemented for piers, accounting for the interaction between axial force N , bending moment M , shear force Q and torsion T (NMQT ); the model is validated against experimental results from the literature. The location of the fault rupture is parametrically investigated, confirming the vulnerability of indeterminate structural systems to large tectonic deformation. The deck is shown to sustain both in-plane and out-of-plane bending moments, as well as torsion; the piers are subjected to biaxial bending, shear and torsion. The response is highly dependent on the location of the fault rupture, emphasizing the need to develop cost-effective modelling techniques. Four such techniques are developed (with and without decoupling) and comparatively assessed using the detailed 3D FE model as benchmark. The best prediction is achieved by a coupled model, which includes the bridge superstructure, detailed 3D modelling of the soil-foundation system only for the pier directly affected by the fault, and nonlinear springs representing the foundations of all other piers. The proposed technique offers a computationally efficient means to parametrically analyse long multispan bridges subjected to faulting, for which full 3D FE modelling is impractical.