Drought–flood variation and its correlation with runoff in three headstreams of Tarim River, Xinjiang, China

The Tarim River lies in the inland area of Northwest China, which has a semiarid or arid climate. Because of relatively scarce precipitation in this area, the main water resource is runoff from a mountainous drainage basin. It is very important to ascertain variations of regular hydrologic and meteorological time series data. Through the use of monthly precipitation and hydrologic data in the three headstream mountain areas of the Tarim River over the past 50 years, this work analyzes the variation of a drought–flood index and annual runoff volume, along with spatio-temporal structures of the index related to runoff at multiple time scales, via non-parametric testing and a wavelet transform method. Wavelet transform can clearly demonstrate many characteristics of the time series, including trend, shift, and major periods. Based on the analysis, the following conclusions can be drawn: (1) the drought–flood indices showed increasing trends for the Aksu and Yarkand rivers, and rose non-significantly for Hotan River. The indices of the three headstreams changed remarkably (p < 0.05) in 1986. The curves of wavelet variance show that significant periods of the indices are 4 and 8 years for Aksu and Hotan rivers, and 8 and 10 years for Yarkand River; (2) runoff of the Aksu and Hotan rivers had significant periods of 6 and 8 years, plus 3 and 9 years for Hotan River; (3) there was significant correlation between the drought–flood indices and annual runoff volume in the three headstreams. The results provide important information toward achieving predictability of flood and drought in Northwest China.     

Elemental and Sr–Nd isotopic geochemistry of Permian Emeishan flood basalts in Zhaotong,Yunnan Province,SW China

International Journal of Earth Sciences - This study presents new whole-rock elemental and isotopic data for the basalts from the Zhaotong area, located in the intermediate zone of the...     

Underplating and assimilation–fractional crystallization of Mesozoic intrusions in the Tongling area,Anhui Province,East China: evidence from xenoliths and host plutons

This paper presents new petrographic observations and geochemical and microprobe analyses for the Laomiaojishan, Xiaotongguanshan, and Tianebaodanshan intrusions in the Tongguanshan mineral district, East China. The plutons vary in composition from quartz monzonitic diorite to pyroxene monzonitic diorite, and contain gabbroic to dioritic xenoliths. The Xiaotongguanshan intrusion yields a SHRIMP zircon U–Pb age of 139.5±2.9 Ma, indicating Late Jurassic to Early Cretaceous magmatism in the Lower Yangtze River Valley. Relative to host rocks, the gabbro and diorite xenoliths are low in SiO₂ (52.03–54.61 wt‐%), Al₂O₃ (12.87–14.43 wt‐%), and total alkalis (Na₂O+K₂O; 5.26–6.30 wt‐%), but high in MgO (5.41–11.66 wt‐%); the host rocks have high SiO₂ (59.97–64.44 wt‐%), Al₂O₃ (16.43–17.59 wt‐%), and total alkalis (6.67–8.25 wt‐%), but are low in MgO (1.52–2.50 wt‐%). Concentrations of rare earth elements (REEs) in the xenoliths (165.70–190.40 ppm) are similar to those in the host rocks (166.12–185.95 ppm), although the ratio of light REEs to heavy REEs in the xenoliths (3.39–4.27) is lower than that in the host plutons (4.86–5.94). All of the analysed rocks show similar REE patterns, although the xenoliths display marked positive Eu anomalies and the host rocks show slightly negative Eu anomalies. Values of epsilon Nd (t) ranges from ?4.9 to ?9.9 in the gabbro xenoliths and from ?11.4 to ?11.9 in the host intrusives. Initial ⁸⁷Sr/⁸⁶Sr ratios are 0.7064–0.7073 in the xenoliths and 0.7072–0.7084 in the quartz monzonitic diorite host rocks. Crystallization temperatures of hornblende and plagioclase in the gabbro xenoliths, diorite xenoliths, and host rocks are 816, 773–790, and 664–725°C, respectively, based on an amphibole–plagioclase geothermometer. The pressures recorded by these phases indicate that they formed at depths of 26, 12–15, and 3–4 km, respectively, based on an aluminum‐in‐hornblende geobarometer. The petrological and geochemical features of the analysed intrusions and xenoliths are consistent with their derivation from basic to intermediate‐acidic magmas that possibly formed via a series of complex interactions between underplated, mantle‐derived basaltic magma and varying amounts of middle‐ to lower‐crustal material, followed by assimilation–fractional crystallization.     

Groundwater mixing and mineralization processes in a mountain–oasis–desert basin,northwest China: hydrogeochemistry and environmental tracer indicators

Hydrogeochemistry and environmental tracers (²H, ¹⁸O, ⁸⁷Sr/⁸⁶Sr) in precipitation, river and reservoir water, and groundwater have been used to determine groundwater recharge sources, and to identify mixing characteristics and mineralization processes in the Manas River Basin (MRB), which is a typical mountain–oasis–desert ecosystem in arid northwest China. The oasis component is artificial (irrigation). Groundwater with enriched stable isotope content originates from local precipitation and surface-water leakage in the piedmont alluvial–oasis plain. Groundwater with more depleted isotopes in the north oasis plain and desert is recharged by lateral flow from the adjacent mountains, for which recharge is associated with high altitude and/or paleo-water infiltrating during a period of much colder climate. Little evaporation and isotope exchange between groundwater and rock and soil minerals occurred in the mountain, piedmont and oasis plain. Groundwater δ²H and δ¹⁸O values show more homogeneous values along the groundwater flow direction and with well depths, indicating inter-aquifer mixing processes. A regional contrast of groundwater allows the ⁸⁷Sr/⁸⁶Sr ratios and δ¹⁸O values to be useful in a combination with Cl, Na, Mg, Ca and Sr concentrations to distinguish the groundwater mixing characteristics. Two main processes are identified: groundwater lateral-flow mixing and river leakage in the piedmont alluvial–oasis plain, and vertical mixing in the north oasis plain and the desert. The ⁸⁷Sr/⁸⁶Sr ratios and selected ion ratios reveal that carbonate dissolution and mixing with silicate from the southern mountain area are primarily controlling the strontium isotope hydrogeochemistry.     

The Permian Huangshanxi Cu–Ni deposit in western China: intrusive–extrusive association,ore genesis,and exploration implications

The Permian Huangshanxi Cu–Ni deposit is the second largest magmatic sulfide deposit discovered to date in a major Ni–Cu province related to protracted basaltic magmatism in eastern Xinjiang, China. It is hosted by a small mafic–ultramafic intrusion comprised predominantly of lherzolites, olivine websterites, gabbronorites, and gabbros. The Huangshanxi intrusion is coeval with Permian basalts of tholeiitic and alkaline affinities in the Tuha and Tarim basins, respectively. To evaluate a possible genetic relationship between the Huangshanxi intrusion and a specific type of coeval basalt in the region, as well as ore genesis in the intrusion, we have carried out an integrated mineralogical, petrological, and geochemical study. Our data reveal that the Huangshanxi intrusive rocks are characterized by relatively flat chondrite-normalized REE patterns, depletion in Nb and Ta, and elevated εNd values varying between 6 and 10. These features are similar to those of coeval tholeiitic basalts in the nearby Tuha basin, but are significantly different from those of coeval alkaline basalts in the relatively remote Tarim basin. The geochemical similarities and differences suggest that the Huangshanxi intrusion is genetically related to the tholeiitic basalts in the Tuha basin, not to the alkaline basalts in the Tarim basin, as suggested previously by some researchers. This implies that regional exploration for the Huangshanxi-type Cu–Ni deposits should be centered in the Tuha basin instead of the Tarim basin. More specifically, the uplifted areas around the Tuha basin where similar intrusions may have been brought close to the surface should be carefully examined for mineralization potential. Intrusive relations and mass balance constraints from incompatible trace elements and sulfide abundances suggest that the Huangshanxi intrusion represents a dynamic magma conduit through which multiple pulses of magma ascended to higher levels or to the surface. Numerical simulation of magma evolution and mixing calculations using Sr–Nd isotopes indicate that selective assimilation of S-bearing crustal materials is important for sulfide saturation during the early stages of magma evolution when lherzolites formed. Fractional crystallization may have also played a role in the attainment of sulfide saturation during the later stages of magma evolution when olivine websterites and gabbronorites formed. In both cases, immiscible sulfide droplets were retained in the conduit to form disseminated sulfide lenses while the fractionated silicate liquids and buoyant phases such as plagioclase continued to ascend. Extremely low PGE tenors in the sulfide ores of the Huangshanxi deposit suggest that the parental magma was highly depleted in chalcophile elements possibly due to previous sulfide segregation at depth.     

The significance of 24-norcholestanes,triaromatic steroids and dinosteroids in oils and Cambrian–Ordovician source rocks from the cratonic region of the Tarim Basin,NW China

Two oil families in Ordovician reservoirs from the cratonic region of the Tarim Basin are distinguished by the distribution of regular steranes, triaromatic steroids, norcholestanes and dinosteroids. Oils with relatively lower contents of C₂₈ regular steranes, C₂₆ 20S, C₂₆ 20R + C₂₇ 20S and C₂₇ 20R regular triaromatic steroids, dinosteranes, 24-norcholestanes and triaromatic dinosteroids originated from Middle–Upper Ordovician source rocks. In contrast, oils with abnormally high abundances of the above compounds are derived from Cambrian and Lower Ordovician source rocks. Only a few oils have previously been reported to be of Cambrian and Lower Ordovician origin, especially in the east region of the Tarim Basin. This study further reports the discovery of oil accumulations of Cambrian and Lower Ordovician origin in the Tabei and Tazhong Uplifts, which indicates a potential for further discoveries involving Cambrian and Lower Ordovician sourced oils in the Tarim Basin. Dinosteroids in petroleum and ancient sediments are generally thought to be biomarkers for dinoflagellates and 24-norcholestanes for dinoflagellates and diatoms. Therefore, the abnormally high abundance of these compounds in extracts from the organic-rich sediments in the Cambrian and Lower Ordovician and related oils in the cratonic region of the Tarim Basin suggests that phytoplankton algae related to dinoflagellates have appeared and might have flourished in the Tarim Basin during the Cambrian Period. Steroids with less common structural configurations are underutilized and can expand understanding of the early development history of organisms, as well as define petroleum systems.     

Origin of the early Permian Wajilitag igneous complex and associated Fe–Ti oxide mineralization in the Tarim large igneous province,NW China

The Wajilitag igneous complex is part of the early Permian Tarim large igneous province in NW China, and is composed of a layered mafic–ultramafic intrusion and associated syenitic plutons. In order to better constrain its origin, and the conditions of associated Fe–Ti oxide mineralization, we carried out an integrated study of mineralogical, geochemical and Sr–Nd–Hf isotopic analyses on selected samples. The Wajilitag igneous rocks have an OIB-like compositional affinity, similar to the coeval mafic dykes in the Bachu region. The layered intrusion consists of olivine clinopyroxenite, coarse-grained clinopyroxenite, fine-grained clinopyroxenite and gabbro from the base upwards. Fe–Ti oxide ores are mainly hosted in fine-grained clinopyroxenite. Forsterite contents in olivines from the olivine clinopyroxenite range from 71 to 76 mol%, indicating crystallization from an evolved magma. Reconstructed composition of the parental magma of the layered intrusion is Fe–Ti-rich, similar to that of the Bachu mafic dykes. Syenite and quartz syenite plutons have ε_Nd(t) values ranging from +1.4 to +2.9, identical to that for the layered intrusion. They may have formed by differentiation of underplated magmas at depth and subsequent fractional crystallization. Magnetites enclosed in olivines and clinopyroxenes have Cr₂O₃ contents higher than those interstitial to silicates in the layered intrusion. This suggests that the Cr-rich magnetite is an early crystallized phase, whereas interstitial magnetite may have accumulated from evolved Fe–Ti-rich melts that percolated through a crystal mush. Low V content in Cr-poor magnetite (<6600 ppm) is consistent with an estimate of oxygen fugacity of FMQ + 1.1 to FMQ + 3.5. We propose that accumulation of Fe–Ti oxides during the late stage of magmatic differentiation may have followed crystallization of Fe–Ti-melt under high fO₂ and a volatile-rich condition.     

Pahoehoe–a′a transitions in the lava flow fields of the western Deccan Traps,India-implications for emplacement dynamics,flood basalt architecture and volcanic stratigraphy

Unlike pahoehoe, documentation of true a′a lavas from a modern volcanological perspective is a relatively recent phenomenon in the Deccan Trap (e.g. Brown et al., 2011, Bull. Volcanol. 73(6): 737–752) as most lava flows previously considered to be a′a (e.g. GSI, 1998) have been shown to be transitional (e.g. Rajarao et al., 1978, Geol. Soc. India Mem. 43: 401–414; Duraiswami et al., 2008 J. Volcanol. Geothermal. Res. 177: 822–836). In this paper we demonstrate the co-existence of autobrecciation products such as slabby pahoehoe, rubbly pahoehoe and a′a in scattered outcrops within the dominantly pahoehoe flow fields. Although volumetrically low in number, the pattern of occurrence of the brecciating lobes alongside intact ones suggests that these might have formed in individual lobes along marginal branches and terminal parts of compound flow fields. Complete transitions from typical pahoehoe to ‘a′a lava flow morphologies are seen on length scales of 100–1000 m within road and sea-cliff sections near Uruli and Rajpuri. We consider the complex interplay between local increase in the lava supply rates due to storage or temporary stoppage, local increase in paleo-slope, rapid cooling and localized increase in the strain rates especially in the middle and terminal parts of the compound flow field responsible for the transitional morphologies. Such transitions are seen in the Thakurwadi-, Bushe- and Poladpur Formation in the western Deccan Traps. These are similar to pahoehoe–a′a transitions seen in Cenozoic long lava flows (Undara ∼160 km, Toomba ∼120 km, Kinrara ∼55 km) from north Queensland, Australia and Recent (1859) eruption of Mauna Loa, Hawaii (a′a lava flow ∼51 km) suggesting that flow fields with transitional tendencies cannot travel great lengths despite strong channelisation. If these observations are true, then it arguably limits long distance flow of Deccan Traps lavas to Rajahmundry suggesting polycentric eruptions at ∼65 Ma in Peninsular India.     

Early Permian East-Ujimqin mafic–ultramafic and granitic rocks from the Xing’an–Mongolian Orogenic Belt,North China: Origin,chronology, and tectonic implications

The East-Ujimqin complex, located north of the Erenhot–Hegenshan fault, North China, is composed of mafic–ultramafic and granitic rocks including peridotite, gabbro, alkali granite, and syenite. We investigated the tectonic setting, age, and anorogenic characteristics of the Xing’an–Mongolian Orogenic Belt (XMOB) through field investigation and microscopic and geochemical analyses of samples from the East-Ujimqin complex and LA-MC-ICP-MS zircon U–Pb dating of gabbro and alkali granite. Petrographic and geochemical studies of the complex indicate that this multiphase plutonic suite developed through a combination of fractional crystallization, assimilation processes, and magma mixing. The mafic–ultramafic rocks are alkaline and have within-plate geochemical characteristics, indicating anorogenic magmatism in an extensional setting and derivation from a mantle source. The mafic–ultramafic magmas triggered partial melting of the crust and generated the granitic rocks. The granitic rocks are alkali and metaluminous and have high Fe/(Fe + Mg) characteristics, all of which are common features of within-plate plutons. Zircon U–Pb geochronological dating of two samples of gabbro and alkali granite yielded ages of 280.8 ± 1.5 and 276.4 ± 0.7 Ma, placing them within the Early Permian. The zircon Hf isotopic data give inhomogeneous ε_Hf(t) values of 8.2–14.7 for gabbroic zircons and extraordinary high ε_Hf(t) values (8.9–12.5) for the alkali granite in magmatic zircons. Thus, we consider the East-Ujimqin mafic–ultramafic and granitic rocks to have been formed in an extensional tectonic setting caused by asthenospheric upwelling and lithospheric thinning. The sources of mafic–ultramafic and granitic rocks could be depleted garnet lherzolite mantle and juvenile continental lower crust, respectively. All the above indicate that an anorogenic magma event may have occurred in part of the XMOB during 280–276 Ma.     

Interlayer interference analysis based on trace elements in water produced from coalbed methane wells: a case study of the Upper Permian coal-bearing strata,Bide–Santang Basin,western Guizhou,China

Commingling coalbed methane (CBM) production will cause interlayer interference and severely impede the efficient drainage and pressure drop in coal seams. Effective recognition of interlayer interference is important during commingling CBM production. On the basis of water samples and trace element data from CBM wells in the Bide–Santang Basin, western Guizhou, China, the trace element dynamic characteristics and their significance for recognition of interlayer interference are discussed. As drainage proceeds, the trace element concentrations in the water tend to increase. Li, Ga, Rb, Sr, and Ba were selected as characteristic trace elements and were used to detect the water source apportionment of commingling production. The trace element concentrations in water derived from deep coal seams are relatively higher than those in water from shallow coal seams. The characteristic trace element concentrations in produced water exhibit good correlation with gas production and the interlayer span (the maximum vertical distance between produced coal seams in a well) of the CBM wells. Low trace element concentrations are indicative of interlayer interference. Wells with low gas production are characterized by a longer interlayer span, higher water production, and lower trace element concentrations. Wells with high gas production characteristically display a short interlayer span, lower water production, and higher trace element concentrations in produced water. Preliminary diagrams for recognition of interlayer interference are established based on characteristic trace elements in the produced water. The upper CBM system has poor commingling compatibility with the middle and lower CBM systems; thus, the middle and lower CBM systems should be a priority for future development.     

Zircon U–Pb geochronology,whole-rock geochemical,and Sr–Nd–Pb isotopic constraints on the timing and origin of Permian and Triassic mafic dykes from eastern North China Craton

Acta Geochimica - This work reports an important episode of extensional, mafic magmatism that impacted the North China Craton (NCC) during the Permo-Triassic and influenced the evolution of this...     

Application of sulfur and carbon isotopes to oil–source rock correlation: A case study from the Tazhong area,Tarim Basin,China

Up until now, it has been assumed that oil in the Palaeozoic reservoirs of the Tazhong Uplift was derived from Upper Ordovician source rocks. Oils recently produced from the Middle and Lower Cambrian in wells ZS1 and ZS5 provide clues concerning the source rocks of the oils in the Tazhong Uplift, Tarim Basin, China. For this study, molecular composition, bulk and individual n-alkane δ¹³C and individual alkyl-dibenzothiophene δ³⁴S values were determined for the potential source rocks and for oils from Cambrian and Ordovician reservoirs to determine the sources of the oils and to address whether δ¹³C and δ³⁴S values can be used effectively for oil–source rock correlation purposes. The ZS1 and ZS5 Cambrian oils, and six other oils from Ordovician reservoirs, were not significantly altered by TSR. The ZS1 oils and most of the other oils, have a “V” shape in the distribution of C₂₇–C₂₉ steranes, bulk and individual n-alkane δ¹³C values predominantly between −31‰ to −35‰ VPDB, and bulk and individual alkyldibenzothiophene δ³⁴S values between 15‰ to 23‰ VCDT. These characteristics are similar to those for some Cambrian source rocks with kerogen δ¹³C values between −34.1‰ and −35.3‰ and δ³⁴S values between 10.4‰ and 21.6‰. The oil produced from the Lower Ordovician in well YM2 has similar features to the ZS1 Cambrian oils. These new lines of evidence indicate that most of the oils in the Tazhong Uplift, contrary to previous interpretations, were probably derived from the Cambrian source rocks, and not from the Upper Ordovician. Conversely, the δ¹³C and δ³⁴S values of ZS1C Cambrian oils have been shown to shift to more positive values due to thermochemical sulfate reduction (TSR). Thus, δ¹³C and δ³⁴S values can be used as effective tools to demonstrate oil–source rock correlation, but only because there has been little or no TSR in this part of the section.     

Mesozoic and Cenozoic structural deformation in the NW Tarim Basin,China: a case study of the Piqiang–Selibuya Fault

The Piqiang–Selibuya Fault is the most significant fault in the NW Tarim Basin, China. It has attracted increasing attention because of the discovery of a series of oil (gas) fields in and around the fault zone. The structural characteristics and evolution of the Piqiang–Selibuya Fault remain controversial. Field geological surveys and seismic data interpretation reveal that the fault has experienced three stages of activity. The thicknesses of the Permian and Miocene strata on opposing sides of the fault are clearly different, and these reveal that the fault has experienced two stages of significant thrusting. The first stage took place at the end of the Triassic and was associated with the Qiangtang Block amalgamated to the south margin of Eurasia. The second stage occurred at the end of the Miocene and might have been caused by the northwards overthrusting of the Pamir. These two stages of thrusting led to the lower–middle Cambrian detachment layer in the eastern part of the Keping thrust belt being 2 km shallower than in the western part. Since the Pliocene, the southern Tien Shan orogenic belt has been reactivated and thrust towards the interior of the Tarim Basin, and a series of ENE–WSW-trending thrust sheets have formed in the Keping thrust belt. Because of the different depth of the detachment layer on the opposing sides of the Piqiang–Selibuya Fault, the number and spacing of thrust sheets formed to the east of the fault differ from those to the west. This dissimilar deformation led to the strike–slip displacement on the Piqiang–Selibuya Fault. The three stages of fault activity record three important tectonic events in the NW Tarim Basin. Qualitative analysis of this activity helps us better understand the influence of the far-field effect of the collisions that occurred on the southern margin of the Eurasia plate on the structural deformation of the NW Tarim Basin.     

Late Palaeoproterozoic post-collisional magmatism in the North China Craton: geochemistry,zircon U–Pb geochronology,and Hf isotope of the pyroxenite–gabbro–diorite suite from Xinghe,Inner Mongolia

The North China Craton (NCC) witnessed a prolonged subduction–accretion history from the early to late Palaeoproterozoic, culminating with final collision at ca. 1.85 Ga and assembling the continental blocks into the cratonic framework. Subsequently, widespread post-collisional magmatism occurred, particularly along the Trans-North China Orogen (TNCO) that sutures the Eastern and Western blocks of the NCC. Here we present petrological, geochemical, and zircon U–Pb geochronological and Lu–Hf data from a pyroxenite (websterite)–gabbro–diorite suite at Xinghe in Inner Mongolia along the northern segment of the TNCO. The internal structures and high Th/U values of the zircons from the gabbro–diorite suite suggest magmatic crystallization. LA-ICP-MS U–Pb age data on three gabbros and one diorite from the suite yield emplacement ages of 1786.1 ± 4.8, 1783 ± 15 ,1754 ± 16 and 1767 ± 13 Ma, respectively. The ε_Hf(t) shows mostly positive values (up to 5.8), with the lowest value at –4.2, suggesting that the magma was derived from dominantly juvenile sources. The generally low SiO₂ and high MgO values, and other trace element features of the Xinghe suite are consistent with fractionation from a mantle-derived magma with a broadly E-MORB affinity, with no significant crustal contamination. Recent studies clearly establish that the major magmatic pulse associated with rifting of the NCC within the Columbia supercontinent occurred in the late Mesoproterozoic at ca. 1.3–1.2 Ga associated with mantle plume activity. This, together with the lack of robust geochemical imprints of rift-related magmatism in the Xinghe suite, prompts us to suggest a tectonic model that envisages magma genesis associated with post-collisional extension during slab break-off, following the westward subduction of the Eastern Block and its collision with the Western Block. The resulting asthenospheric upwelling and heat input might have triggered the magma generation from a heterogeneous, subduction-modified sub-lithospheric mantle source for the Xinghe rocks, as well as for similar late Palaeoproterozoic suites in the TNCO.     

Field geology,geochronology and geochemistry of mafic–ultramafic rocks from Alxa,China: Implications for Late Permian accretionary tectonics in the southern Altaids

The time of termination of orogenesis for the southern Altaids has been controversial. Systematic investigations of field geology, geochronology and geochemistry on newly discriminated mafic–ultramafic rocks from northern Alxa in the southern Altaids were conducted to address the termination problem. The mafic–ultramafic rocks are located in the Bijiertai, Honggueryulin, and Qinggele areas, stretching from west to east for about 100 km. All rocks occur high-grade gneisses as tectonic lenses that are composed of peridotite, pyroxenite, gabbro, and serpentinite, most of which have undergone pronounced alteration, i.e., serpentinization and chloritization. Geochemically, the rocks are characterized by uniform compositional trends, i.e., with low SiO₂-contents (42.51–52.21 wt.%) and alkalinity (Na₂O + K₂O) (0.01–5.45 wt.%, mostly less than 0.8 wt.%), and enrichments in MgO (7.37–43.36 wt.%), with Mg# = 52.75–91.87. As the rocks have been strongly altered and have a wide range of loss-on-ignition (LOI: 0.44–14.07 wt.%) values, they may have been subjected to considerable alteration by either seawater or metamorphic fluids. The REE and trace element patterns show a relatively fractionated trend with LILE enrichment and HFSE depletion, similar to that of T-MORB between N-MORB and E-MORB, indicating that the parental melt resulted from the partial melting of oceanic lithospheric mantle overprinted by fluid alteration of island-arc origin. The ultramafic rocks are relics derived from the magma after a large degree of partial melting of oceanic lithospheric mantle with superposed island arc processes under the influence of mid-ocean-ridge magmatism. LA-ICP MS U–Pb zircon ages of gabbros from three spots are 274 ± 3 Ma (MSWD = 0.35), 306 ± 3 Ma (MSWD = 0.49), 262 ± 5 Ma (MSWD = 1.2), respectively, representing the formation ages of the mafic–ultramafic rocks. Therefore, considering other previously published data, we suggest that the mafic–ultramafic rocks were products of south-dipping subduction, most probably with a slab window caused by ridge subduction, of the Paleo-Asian Ocean plate beneath the Alxa block in the Late Carboniferous to Late Permian before the Ocean completely closed. This sheds light on the controversial tectonic history of the southern Altaids and supports the concept that the termination of orogenesis was in the end-Permian to Triassic.     

Detachment folding in a Lower Cambrian–Upper Permian karst reservoir: 3D model of the Yubei 3D area (eastern Markit Slope,Tarim Basin,Northwest China)

A three-dimensional (3D) structural modeling of the Lower Cambrian–Upper Permian Yubei 3D area was performed to understand its structural evolution. This model reproduces the present-day structure of the basin and comprises 11 horizons within Lower Cambrian to Upper Permian rocks. The analysis is based on 3D depth views and faults. The results image salt movements due to tectonics and/or burial. From these observations, this paper deduces that salt structures are correlated to the main faults and tectonic events. From the model analysis, we interpret the timing and geometry of Tarim Basin tectonics. The fault geometry can be resolved based on the strike of the fault, the morphology of hanging wall strata, and the stratigraphic distribution. Emphasis is placed on gypsum rock detachment, considering its movements during the Middle Caledonian event and decoupling effects during tectonic evolution. Moreover, we point to the structural control of the Paleozoic basement and the crustal architecture (Yubei 3D Zone) on the geometry of the Tarim Basin.     

Origin of the Late Cretaceous syenite from Yandangshan,SE China,constrained by zircon U–Pb and Hf isotopes and geochemical data

The Yandangshan syenite is a representative Late Cretaceous igneous pluton cropping out in SE China. U–Pb zircon dating using LA‐ICP‐MS yielded a crystallization age of 98±1 Ma for the syenite. Petrographically and geochemically of shoshonitic affinity, it is enriched in LREE and LILE, and has a pronounced Nb–Ta trough in the primitive mantle‐normalized trace element spider diagram. Zircon ?_Hf(t) values vary from ?3.04 to ?7.71, displaying a unimodal distribution. The syenite also has high Sr [(⁸⁷Sr/⁸⁶Sr) _i  = 0.7086–0.7089], low Nd [?_Nd(t) = ?6.57 to ?7.64] isotopic ratios, plotting in the enriched mantle field on an ?_Nd(t) versus (⁸⁷Sr/⁸⁶Sr) _i diagram. We propose that the Yandangshan syenite was generated by pyroxene‐dominated high‐pressure fractional crystallization from basaltic magma that was derived from an enriched mantle source. Although coexisting Yandangshan rhyolites have Sr–Nd isotopic compositions similar to the Yandangshan syenite, they were not derived from the same source. Instead, the rhyolitic magma was produced by partial melting of crustal materials as a result of the underplating of basaltic magma. The crust‐like Sr–Nd–Hf isotopic signature of the Yandangshan syenite is ascribed to mantle sources that were enriched by subducted sediments. Formation of Yandangshan syenite may represent roll‐back of the subducting palaeo‐Pacific plate and migration of the arc front to the Yandangshan area at ～98 Ma.     

A combined EMPA and LA-ICP-MS study of Li-bearing mica and Sn–Ti oxide minerals from the Qiguling topaz rhyolite (Qitianling District,China): The role of fluorine in origin of tin mineralization

The Sn-rich Qiguling topaz rhyolite dike intrudes the Qitianling biotite granite of the Nanling Range in southern China; the granite hosts the large Furong Sn deposit. The rhyolite dike is typically peraluminous, volatile-enriched, and highly evolved. Whole-rock F and Sn concentrations attain 1.9 wt.% and 2700 ppm, respectively. The rhyolite consists of a fine-grained matrix formed by quartz, feldspar, mica and topaz, enclosing phenocrysts of quartz, feldspar and mica; it is locally crosscut by quartz veinlets. Lithium-bearing micas in both phenocrysts and the groundmass can be classified as primary zinnwaldite, “Mus-Ann” (intermediate member between annite and muscovite), and secondary Fe-rich muscovite. Topaz is present in the groundmass only; common fluorite occurs in the groundmass and also in a specific cassiterite, rutile and fluorite (Sn–Ti–F) assemblage. Cassiterite and rutile are the only Sn and Ti minerals; both cassiterite and Nb-rich rutile are commonly included in the phenocrysts. The Sn–Ti–F assemblage is pervasive, and contains spongy cassiterite in some cases; cassiterite also occurs in quartz veinlets which cut the groundmass. Electron microprobe and LA-ICP-MS compositions were used to study the magmatic and hydrothermal processes and the role of F in Sn mineralization. The presence of zinnwaldite and “Mus-Ann”, which are respectively representative of early and late mica crystallization during magma differentiation, also suggests a significant decrease in f(HF)/f(H₂O) of the system. Cassiterite included in the zinnwaldite phenocrysts is suggested to have crystallized from the primary magma at high temperature. Within the Sn–Ti–F aggregates, rutile crystallized as the earliest mineral, followed by fluorite and cassiterite. Spongy cassiterite containing inclusions of the groundmass minerals indicate a low viscosity of the late fluid. The cassiterite in the quartz veinlets crystallized from low-temperature hydrothermal fluids, which possibly mixed with meteoric water. In general, cassiterite precipitated during both magmatic and hydrothermal stages, and over a range of temperatures. The original fluorine and tin enrichments, f(HF)/f(H₂O) change in the residual magma, formation of Ca,Sn,F-rich immiscible fluid, decrease of the f(HF) during groundmass crystallization, and mixing of magma-derived fluids with low-saline meteoric water during the late hydrothermal stage, are all factors independently or together responsible for the Sn mineralization in the Qiguling rhyolite.