Emplacement history of Granophyre dikes in the Vredefort Impact Structure,South Africa,inferred from geochemical evidence

The central Vredefort Impact Structure is characterised by impact melt rocks, known as the Vredefort Granophyre dikes, the mode of emplacement of which is not well known. Whole-rock and petrographic analyses of two dikes were conducted and compared to published geochemical data to elucidate the mode and timing of dike formation. The dikes are characterised by compositional and textural heterogeneity between, and within, individual dikes. Specifically, central dike portions are felsic and rich in wall rock fragments, whereas marginal dike phases are more mafic and fragment-poor. Collectively, this suggests that melt was derived from compositionally different parental melts and emplaced in at least two pulses. In addition, the chemical heterogeneity between fragment-rich and fragment-poor dike zones can be explained by variable assimilation of a mafic component, notably Ventersdorp basalt, at the base of the impact melt sheet, from which melt of the Granophyre dikes is derived. This scenario accounts for the mafic and fragment-poor character of melt emplaced first in the dikes and the more felsic and fragment-rich nature of melts of the following emplacement pulse, i.e., when the impact melt was less hot and thus less capable of digesting large quantities of (mafic) wall rock fragments. Differences in geometrical, textural, chemical and fragment characteristics between the Granophyre dikes and pseudotachylite bodies can be explained by the same process, i.e., impact melt drainage, but operating at different times after impact.     

Planar deformation features and impact glass in inclusions from the Vredefort Granophyre,South Africa

Abstract— The Vredefort Granophyre represents impact melt that was injected downward into fractures in the floor of the Vredefort impact structure, South Africa. This unit contains inclusions of country rock that were derived from different locations within the impact structure and are predominantly composed of quartzite, feldspathic quartzite, arkose, and granitic material with minor proportions of shale and epidiorite. Two of the least recrystallized inclusions contain quartz with single or multiple sets of planar deformation features. Quartz grains in other inclusions display a vermicular texture, which is reminiscent of checkerboard feldspar. Feldspars range from large, twinned crystals in some inclusions to fine‐grained aggregates that apparently are the product of decomposition of larger primary crystals. In rare inclusions, a mafic mineral, probably biotite or amphibole, has been transformed to very fine‐grained aggregates of secondary phases that include small euhedral crystals of Fe‐rich spinel. These data indicate that inclusions within the Vredefort Granophyre were exposed to shock pressures ranging from <5 to 8–30 GPa. Many of these inclusions contain small, rounded melt pockets composed of a groundmass of devitrified or metamorphosed glass containing microlites of a variety of minerals, including K‐feldspar, quartz, augite, low‐Ca pyroxene, and magnetite. The composition of this devitrified glass varies from inclusion to inclusion, but is generally consistent with a mixture of quartz and feldspar with minor proportions of mafic minerals. In the case of granitoid inclusions, melt pockets commonly occur at the boundaries between feldspar and quartz grains. In metasedimentary inclusions, some of these melt pockets contain remnants of partially melted feldspar grains. These melt pockets may have formed by eutectic melting caused by inclusion of these fragments in the hot (650 to 1610 °C) impact melt that crystallized to form the Vredefort Granophyre.     

Differentiation and emplacement of the Worthington Offset Dike of the Sudbury impact structure,Ontario

Abstract— The Offset Dikes of the 1.85 Ga Sudbury Igneous Complex (SIC) constitute a key topic in understanding the chemical evolution of the impact melt, its mineralization, and the interplay between melt migration and impact‐induced deformation. The origin of the melt rocks in Offset Dikes as well as mode and timing of their emplacement are still a matter of debate. Like many other offset dikes, the Worthington is composed of an early emplaced texturally rather homogeneous quartz‐diorite (QD) phase at the dike margin, and an inclusion‐ and sulfide‐rich quartz‐diorite (IQD) phase emplaced later and mostly in the centre of the dike. The chemical heterogeneity within and between QD and IQD is mainly attributed to variable assimilation of host rocks at the base of the SIC, prior to emplacement of the melt into the dike. Petrological data suggest that the parental magma of the Worthington Dike mainly developed during the pre‐liquidus temperature interval of the thermal evolution of the impact melt sheet (>1200 °C). Based on thermal models of the cooling history of the SIC, the two‐stage emplacement of the Worthington Dike occurred likely thousands to about ten thousand years after impact. Structural analysis indicates that an alignment of minerals and host rock fragments within the Worthington Dike was caused by ductile deformation under greenschist‐facies metamorphic conditions rather than flow during melt emplacement. It is concluded that the Worthington Offset Dike resulted from crater floor fracturing, possibly driven by late‐stage isostatic readjustment of crust underlying the impact structure.     

Laser probe argon-40/argon-39 dating of coesite- and stishovite-bearing pseudotachylytes and the age of the Vredefort impact event

Abstract— Age determinations have been made on pseudotachylytic rocks from the controversial Vredefort structure of South Africa using the laser microprobe ⁴⁰Ar/³⁹Ar dating technique. Coesite- and stishovitebearing veins in a quartzite from the Central Rand Group of the collar rocks were dated using a 10-μm diameter focused ultra-violet laser beam. These yielded a weighted mean age of 2027 ± 18 Ma (2σ). Six pseudotachylytes, sampled from four different locations within the Outer Granite Gneiss of the core, were dated using an 50–100-μm diameter focused infrared laser beam. These pseudotachylytes exhibit altered vein margins with apparent ages considerably younger than ages obtained from the fresher centres of veins. The best weighted mean pseudotachylyte matrix age obtained was 2018 ± 14 Ma (2σ). Most of the clasts within the pseudotachylyte matrices retain significantly older (e.g., Archean) ages, indicative of their parent rock history. Our results show that five of the seven dated samples possess matrix ages of ～2000 Ma, similar to the age of the Granophyre (Walraven et al., 1990), a supposed impact melt rock (French and Nielsen, 1990). The dating of coesite- and stishovite-bearing veins equates the shock event with pseudotachylyte formation, generation of the Granophyre and creation of the Vredefort structure. The results affirm that the Vredefort Dome is a meteorite impact structure and show that it formed at 2018 ± 14 Ma (2σ).     

Geophysical characterization of the Daskop granophyre dyke and surrounding host rocks,Vredefort impact structure,South Africa

Granophyre dykes in the central part of the Vredefort impact structure are believed to be the remnants of the impact melt sheet, which intruded downwards along the fractures in the crater floor. Little is known about their original penetration depth, dip, structural relationships with the host rocks, and their general geophysical characteristics. This information is critical to understand the emplacement history of the granophyre dykes, as it relates to the formation and modification of large impact structures. We conducted magnetic and resistivity surveys across the Daskop granophyre dyke (DGD), one of the impact melt dykes in the structure's core. The magnetic survey revealed that the DGD gives a strong magnetic response at positions where the dyke outcrop exceeds the surface topography, but a very weak response where the outcrop is nearly at the same elevation as the surrounding topography. The magnetic anomaly is thus predominantly due to the outcrop protruding above ground level, suggesting a limited volume of dyke material in the subsurface and a small penetration depth. The resistivity survey performed on two profiles, set perpendicularly across the DGD, indicated a shallow penetration depth (<3 m), consistent with the magnetic interpretation. Thus, our geophysical study demonstrates that the DGD is currently at the very bottom of its original emplacement. This may either be an erosional coincidence, or it may be controlled by a fundamental process of impact cratering. Further studies are warranted to determine if other granophyre dykes at Vredefort are similarly at their lowermost terminations.     

Lunar meteorite Queen Alexandra Range 93069: A lunar highland regolith breccia with very low abundances of mafic components

Abstract— Lunar meteorite QUE 93069 found in Antarctica is a mature, anorthitic regolith breccia with highland affinities that was ejected from the Moon <0.3 Ma ago. The frequency distribution of mineral and lithic clasts gives information about the nature of the regolith and subregolith basement near the ejection site as well as about the abundances of rock types shocked to different degrees prior to the breccia formation. Thin section QUE 93069,37 consists of 67.5 vol% fine-grained (<～130 μm) constituents and 32.5 vol% mineral and lithic clasts and an impact melt vein. The most abundant types of these clasts are intragranularly recrystallized anorthosites and plagioclases (together 26.3 vol%) and feldspathic fine-grained to microporphyritic crystalline melt breccias (21.9 vol%). Mafic crystalline melt breccias are extremely rare (1.3 vol%). Granulitic lithologies are 10.4 vol%, recrystallized feldspathic melt breccias are 15.0 vol%, and glasses are 3.5 vol%. The impact melt vein cutting across the entire thin section was probably formed subsequent to the lithification process of the bulk rock at pressures below 20 GPa, because the bulk rock never experienced a higher peak shock pressure. Lunar meteorite QUE 93069 has a higher abundance of clear glass, occurring within melt spherules, glassy fragments, and an impact melt vein than lunar meteorites ALHA81005, Y-791197, Y-82192/3, Y-86032, or MAC 88104/5. The high abundance of melt spherules indicates that this lunar meteorite contains the highest content of typical regolith components. Mafic crystalline melt breccias are much rarer in QUE 93069 than in all other lunar highland regolith breccias. The extremely low abundance of mafic components may constrain possible areas of the Moon, from which the breccia was derived. The source area of QUE 93069 must be a highland terrain lacking significant mafic impact melts or mare components.     

The role of substrate characteristics in producing anomalously young crater retention ages in volcanic deposits on the Moon: Morphology,topography, subresolution roughness,and mode of emplacement of the Sosigenes lunar irregular mare patch

Lunar irregular mare patches (IMPs) comprise dozens of small, distinctive, and enigmatic lunar mare features. Characterized by their irregular shapes, well-preserved state of relief, apparent optical immaturity, and few superposed impact craters, IMPs are interpreted to have been formed or modified geologically very recently (<~100 Ma; Braden et al. 2014 ). However, their apparent relatively recent formation/modification dates and emplacement mechanisms are debated. We focus in detail on one of the major IMPs, Sosigenes, located in western Mare Tranquillitatis, and dated by Braden et al. ( 2014 ) at ~18 Ma. The Sosigenes IMP occurs on the floor of an elongate pit crater interpreted to represent the surface manifestation of magmatic dike propagation from the lunar mantle during the mare basalt emplacement era billions of years ago. The floor of the pit crater is characterized by three morphologic units typical of several other IMPs, i.e., (1) bulbous mounds 5–10 m higher than the adjacent floor units, with unusually young crater retention ages, meters thick regolith, and slightly smaller subresolution roughness than typical mature lunar regolith; (2) a lower hummocky unit mantled by a very thin regolith and significantly smaller subresolution roughness; and (3) a lower blocky unit composed of fresh boulder fields with individual meter-scale boulders and rough subresolution surface texture. Using new volcanological interpretations for the ascent and eruption of magma in dikes, and dike degassing and extrusion behavior in the final stages of dike closure, we interpret the three units to be related to the late-stage behavior of an ancient dike emplacement event. Following the initial dike emplacement and collapse of the pit crater, the floor of the pit crater was flooded by the latest-stage magma. The low rise rate of the magma in the terminal stages of the dike emplacement event favored flooding of the pit crater floor to form a lava lake, and CO gas bubble coalescence initiated a strombolian phase disrupting the cooling lava lake surface. This phase produced a very rough and highly porous (with both vesicularity and macroporosity) lava lake surface as the lake surface cooled. In the terminal stage of the eruption, dike closure with no addition of magma from depth caused the last magma reaching shallow levels to produce viscous magmatic foam due to H₂O gas exsolution. This magmatic foam was extruded through cracks in the lava lake crust to produce the bulbous mounds. We interpret all of these activities to have taken place in the terminal stages of the dike emplacement event billions of years ago. We attribute the unusual physical properties of the mounds and floor units (anomalously young ages, unusual morphology, relative immaturity, and blockiness) to be due to the unusual physical properties of the substrate produced during the waning stages of a dike emplacement event in a pit crater. The unique physical properties of the mounds (magmatic foams) and hummocky units (small vesicles and large void space) altered the nature of subsequent impact cratering, regolith development, and landscape evolution, inhibiting the typical formation and evolution of superposed impact craters, and maintaining the morphologic crispness and optical immaturity. Accounting for the effects of the reduced diameter of craters formed in magmatic foams results in a shift of the crater size–frequency distribution age from <100 Myr to billions of years, contemporaneous with the surrounding ancient mare basalts. We conclude that extremely young mare basalt eruptions, and resulting modification of lunar thermal evolution models to account for the apparent young ages of the IMPs, are not required. We suggest that other IMP occurrences, both those associated with pit craters atop dikes and those linked to fissure eruptions in the lunar maria, may have had similar ancient origins.     

Impact processing of chondritic planetesimals: Siderophile and volatile element fractionation in the Chico L chondrite

Abstract— A large impact event 500 Ma ago shocked and melted portions of the L‐chondrite parent body. Chico is an impact melt breccia produced by this event. Sawn surfaces of this 105 kg meteorite reveal a dike of fine‐grained, clast‐poor impact melt cutting shocked host chondrite. Coarse (1–2 cm diameter) globules of FeNi metal + sulfide are concentrated along the axis of the dike from metal‐poor regions toward the margins. Refractory lithophile element abundance patterns in the melt rock are parallel to average L chondrites, demonstrating near‐total fusion of the L‐chondrite target by the impact and negligible crystal‐liquid fractionation during emplacement and cooling of the dike. Significant geochemical effects of the impact melting event include fractionation of siderophile and chalcophile elements with increasing metal‐silicate heterogeneity, and mobilization of moderately to highly volatile elements. Siderophile and chalcophile elements ratios such as Ni/Co, Cu/Ga, and Ir/Au vary systematically with decreasing metal content of the melt. Surprisingly small (?10²) effective metal/silicate‐melt distribution coefficients for highly siderophile elements probably reflect inefficient segregation of metal despite the large degrees of melting. Moderately volatile lithophile elements such K and Rb were mobilized and heterogeneously distributed in the L‐chondrite impact breccias whereas highly volatile elements such as Cs and Pb were profoundly depleted in the region of the parent body sampled by Chico. Volatile element variations in Chico and other L chondrites are more consistent with a mechanism related to impact heating rather than condensation from a solar nebula. Impact processing can significantly alter the primary distributions of siderophile and volatile elements in chondritic planetesimals.     

Shallow depth extent of the Lesutoskraal granophyre dike in the Vredefort impact structure: Geophysical surveys and trenching data

Recent observations and geophysical studies at the Vredefort impact structure have indicated that the impact melt dikes in the central uplift of the structure have small depth extents. In this study, we performed magnetic and electrical resistivity tomography (ERT) surveys of the Lesutoskraal granophyre dike (LGD) and trenched to confirm its depth extent. The ERT survey showed that outcrops of the LGD are associated with shallow resistive zones with <3 m depth extent, but such zones do not occur where outcrops are absent. Visual observations in the trench confirmed that the dike has a small depth extent (~0.75 m) at this location. However, the magnetic survey revealed anomalies along the entire strike of the dike, even where no outcrops occur. We suggest that remagnetization of the host rock within a metamorphic contact aureole could explain the presence of magnetic anomalies in the absence of outcrops. Considering the results of the ERT survey, the observations made in the trench, and the surface distribution of outcrops of the LGD, we confirm that this dike has a small depth extent (<3 m) along its entire length and propose that outcrops represent the intersection of the dike terminus with the current erosional surface.     

Through the impact glass: Insight into the evolution of melt at the Mistastin Lake impact structure

By analyzing impact glass, the evolution of the impact melt at the Mistastin Lake impact structure was investigated. Impact glass clasts are present in a range of impactites, including polymict breccias and clast‐rich impact melt rock, and from a variety of settings within the crater. From the glass clasts analyzed, three petrographic subtypes of impact glass were identified based on their clast content, prevalence of schlieren, color, texture, and habit. Several alteration phases were also observed replacing glass and infilling vesicles; however, textural observations and quantified compositional data allowed for the identification of pristine impact glass. Although the various types of glasses show significant overlap in their major oxide composition, several subtle variations in the major oxide chemistry of the glass were observed. To investigate this variation, a least‐squares mixing model was implemented utilizing the composition of the glass and the known target rock chemistry to model the initial melt composition. Additionally, image analysis of the glass clasts was used to investigate whether the compositional variations correlated to textural difference in the lithologies. We propose that the textural and compositional dichotomy observed is a product of the evolution, assimilation, and emplacement of the glass. The dichotomy is reflective of the melt either being ballistically emplaced (group 2 glasses: occurring in melt‐poor polymict breccias at lowermost stratigraphic position outside the transient crater) or the result of late‐stage melt flows (group 1 glasses, occurring in melt‐bearing polymict breccias and impact melt rocks at higher stratigraphic positions outside the transient crater).     

The case for an Imbrium origin of the Apollo thorium-rich impact-melt breccias

Abstract— Mafic, Th-rich impact-melt breccias, most of which are identified with the composition known as low-K Fra Mauro (LKFM), are the most common rock type in the nonmare regoliths of the Apollo lunar landing sites. The origin of mafic impact-melt breccias bears on many lunar problems: the nature of the late meteoroid bombardment (cataclysm); the spatial distribution of KREEP, both near the surface and at depth; the ages of the major basins; and the composition of the early crust of the nearside lunar highlands. Thus, it is crucial that the origin of mafic impact-melt breccias be accurately understood. Because of both intra- and intersite differences in compositions of mafic impact-melt breccia samples, apparent differences in crystallization age, and differences in siderophile-element ratios, previous studies have argued that either (1) most mafic impact-melt breccias are the products of several large craters local to the site at which they were found but that some are of basin origin or that (2) they are all from the Imbrium (Apollos 14 and 15), Nectaris (Apollo 16), and Serenitatis (Apollo 17) basins. Here, we reconsider the hypothesis that virtually all of the Th-rich, mafic impact-melt breccias from the Apollo missions are products of the Imbrium impact. Ejecta deposit modeling based on modern crater scaling indicates that the Imbrium event produced ejecta deposits that average hundreds of meters thick or more at all Apollo highland sites, which is thicker than some previous estimates. Substantial amounts of Imbrium ejecta should have been sampled at every Apollo highland site. We suggest that the mafic impact-melt breccias may be the principal form of those ejecta. The Imbrium projectile impacted into Th-rich material that we regard as part of a unique, mafic, lunar geochemical province we call the High-Th Oval Region. Based on the surface distribution of Th, only basins within the High-Th Oval Region excavated Th-rich material; the Th concentrations of the highlands as observed by the Apollo orbiting γ-ray experiments are consistent with the estimates from ejecta modeling. Of the younger basin-forming impacts, only Imbrium was large enough to produce the copious amount of melt required by the ubiquitous presence of mafic impact-melt breccias in the Apollo-sampled regolith. The High-Th Oval Region still may have been molten or hot at shallow depths ～4 Ga ago when the Imbrium projectile struck. We reason that compositional heterogeneity of ejected melt breccia is to be expected under these circumstances. We argue that siderophile-element “fingerprints” of mafic impact-melt breccias are not inconsistent with production of all common types by a single projectile. We suggest that the narrow range of ages of 3.7–4.0 Ga for all successfully dated mafic impact-melt breccias may reflect a single event whose age is difficult to measure precisely, rather than a number of discrete impact events closely spaced in time, such that reported age variations among mafic impact-melt breccias reflect the ability to measure ⁴⁰Ar/³⁹Ar ages with greater precision than the accuracy with which measured portions of mafic impact-melt breccias have recorded the time of their formation.     

Heterogeneity of melts in impact deposits and implications for their origin (Ries suevite,Germany)

Impact melt‐bearing clastic deposits (suevites) are one of the most important records of the impact cratering process. A deeper understanding of their composition and formation is therefore essential. This study focuses on impact melt particles in suevite at Ries, Germany. Textures and chemical evidence indicate that the suevite contains three melt types that originate from different shock levels in the target. The most abundant melt type (“melt type 1”) represents well‐mixed whole‐rock melting of crystalline basement and includes incompletely mixed mafic melt schlieren (“melt type 1 mafic”). Polymineralic melt type 2 comprises mixes between monomineralic melt types 3 and melt type 1. Melt types 2 and 3 are located within melt type 1 as small patches or schlieren but also isolated within the suevite matrix. The main melt type 1 is heterogeneous with respect to trace elements, varying geographically around the crater: in the western sector, it has lower values in trace elements, e.g., Ba, Zr, Th, and Ce, than in the eastern sector. The west–east zoning likely reflects the heterogeneous nature of crystalline basement target rocks with lower trace element contents, e.g., Ba, Zr, Th, and Ce, in the west compared to the east. The chemical zoning pattern of suevite melt type 1 indicates that mixing during ejection and emplacement occurred only on a local (hundreds of meters) scale. The incomplete larger scale mixing indicated by the preservation of these local chemical signatures, and schlieren corroborate the assumption that mixing, ejection, and quenching were very rapid, short‐lived processes.     

Chemical compositions of impact melt breccias and target rocks from the Tenoumer impact crater,Mauritania

Abstract— The impact melt breccias from the Tenoumer crater (consisting of a fine‐grained intergrowth of plagioclase laths, pyroxene crystals, oxides, and glass) display a wide range of porosity and contain a large amount of target rock clasts. Analyses of major elements in impact melt rocks show lower contents of SiO₂, Al₂O₃, and Na₂O, and higher contents of MgO, Fe₂O₃, and CaO, than the felsic rocks (i.e., granites and gneisses) of the basement. In comparison with the bulk analyses of the impact melt, the glass is strongly enriched in Si‐Al, whereas it is depleted both in Mg and Fe; moreover, the impact melt rocks are variably enriched or depleted in some REE with respect to the felsic and mafic bedrock types. Gold is slightly enriched in the impact melt, and Co, Cr, and Ni abundances are possibly due to a contribution from mafic bedrock. Evidences of silicate‐carbonate liquid immiscibility, mainly as spherules and globules of calcite within the silicate glass, have been highlighted. HMX mixing calculation confirm that the impact melt rocks are derived from a mixing of at least six different target lithologies outcropping in the area of the crater. A large contribution is derived from granitoids (50%) and mica schist (17–19%), although amphibolites (?15%), cherty limestones (?10%), and ultrabasites (?6%) components are also present. The very low abundances of PGE in the melt rock seem to come mainly from some ultrabasic target rocks; therefore, the contamination from the meteoritic projectile appears to have been negligible.     

Petrographic and geochemical characterization of the granitic rocks of the Araguainha impact crater,Brazil

Petrographic and geochemical data obtained on the Araguainha impact crater (Goiás/Mato Grosso States, Brazil) indicate the existence of several molten products that originated during impact‐induced congruent melting of an alkali‐granite exposed in the inner part of the central uplift of the structure. Although previous studies have described these melts to some extent, there is no detailed discussion on the petrographic and geochemical variability in the granite and its impactogenic derivatives, and therefore, little is known about the geochemical behavior and mobility of trace elements during its fusion in the central part of the Araguainha crater. This paper demonstrates that the preserved granitoid exposed in the core of the structure is a magnesium‐rich granite, similar to postcollisional, A‐type granites, also found in terrains outside the Araguainha crater, in the Brasília orogenic belt. The molten products are texturally distinct and different from the original rock, but have very similar geochemical composition, making it difficult to separate these lithotypes based on concentrations of major and minor elements. This also applies for trace and rare earth elements (REE), thus indicating a high degree of homogenization during impact‐induced congruent melting under high pressure and postshock temperature conditions. Petrographic observations, along with geochemical data, indicate that melting occurs selectively, where some of the elements are transported with the melt. Simultaneously, there is an effective dissolution of the rock (granite), which leads to entrainment of the most resistant solid phases (intact or partially molten minerals) into the melt. Minerals more resistant to melting, such as quartz and oxides, contribute substantially to a chemical balance between the preserved granite and the fusion products generated during the meteoritic impact.     

Steinheim suevite—A first report of melt‐bearing impactites from the Steinheim Basin (SW Germany)

Abstract– The 3.8 km Steinheim Basin in SW Germany is a complex impact crater with central uplift hosted by a sequence of Triassic to Jurassic sedimentary rocks. It exhibits a well‐preserved crater morphology, intensely brecciated limestone blocks that form the crater rim, as well as distinct shatter cones in limestones. In addition, an impact breccia mainly composed of Middle to Upper Jurassic limestones, marls, mudstones, and sandstones is known from drilling into the impact crater. No impact melt lithologies, however, have so far been reported from the Steinheim Basin. In samples of the breccia that were taken from the B‐26 drill core, we discovered small particles (up to millimeters in size) that are rich in SiO₂ (～50 wt%) and Al₂O₃ (～28 wt%), and contain particles of Fe‐Ni‐Co sulfides, as well as target rock clasts (shocked and unshocked quartz, feldspar, limestone) and droplet‐shaped particles of calcite. The particles exhibit distinct flow structures and relicts of schlieren and vesicles. From the geochemical composition and the textural properties, we interpret these particles as mixed silicate melt fragments widely recrystallized, altered, and/or transformed into hydrous phyllosilicates. Furthermore, we detected schlieren of lechatelierite and recrystallized carbonate melt. On the basis of impactite nomenclature, the melt‐bearing impact breccia in the Steinheim Basin can be denominated as Steinheim suevite. The geochemical character of the mixed melt particles points to Middle Jurassic sandstones (“Eisensandstein” Formation) that crop out at the center of the central uplift as the source for the melt fragments.     

Impact melt dikes in the Sudbury multi-ring basin (Canada): Implications from uranium-lead geochronology on the Foy Offset Dike

Abstract To investigate the origin of Offset Dikes and their age relationships to major impact generated lithologies in the Sudbury multi-ring impact structure, such as the Main Mass of the Sudbury “Igneous” Complex, zircon and baddeleyite were dated by the U-Pb chronometer. The rocks analysed are one diorite and two quartz diorites from inside the Foy Offset, one quartz diorite from the contact zone, and two country rock samples collected at 10 and 30 m distances from the contact within the Levack Gneiss Complex. The 21 analysed zircon and baddeleyite fractions yield a crystallization age of 1852 +4/-3 (2σ) Ma for the accessory minerals in the Foy Offset Dike and an age of 2635 ± 5 Ma for the shocked Levack country rock, in which zircons show significant shock effects (multiple sets of planar fractures), in contrast to the totally unshocked zircons of the Offset Dike. Within given errors, the new age of 1852 Ma is identical to the pooled 1850 ± 1 Ma U-Pb age determined by Krogh et al. (1984) as the crystallization age of accessory phases in different lithologies of the Sudbury “Igneous” Complex, which has been interpreted to represent the coherent impact melt sheet of the Sudbury Structure. This excellent agreement of the ages substantiates that emplacement of the Offset Dikes occurred coevally with the formation of the impact melt sheet. Total absence of inherited zircons in the central part of the Foy Offset indicates melting of the precursor material at temperatures well above 1700 °C, which emphasizes the origin of the dike lithologies by impact melting.     

Chemical variations and genetic relationships between the Hess and Foy offset dikes at the Sudbury impact structure

Offset dikes are found concentrically around—and extending radially outward from—the Sudbury Igneous Complex (SIC), which represents an ~3 km thick differentiated impact melt sheet. The dikes are typically composed of an inclusion‐rich, so‐called quartz diorite (IQD) in the center of the dike, and an inclusion‐poor quartz diorite (QD) along the margins of the dike. New exposures of the intersection between the concentric Hess and radial Foy offset dikes provide an excellent opportunity to understand the relationship between the radial and concentric offset dikes and their internal phases. The goal was to constrain the timing of the dike emplacements relative to the impact and formation of the SIC. Results herein suggest that (1) the timing between the emplacement of the QD and IQD melts was geologically short, (2) the Hess and Foy dikes coexisted as melts at the same time and the intersection between them represents a mixture of the two, (3) the Foy dike has a slightly more evolved chemical composition than the Hess dike, and (4) the IQD melt from the Foy dike underwent some degree of chemical fractionation after its initial emplacement.     

Constraints on the size of the Vredefort impact crater from numerical modeling

Abstract— The Vredefort structure in South Africa was created by a meteorite impact about two billion years ago. Since that time, the crater has been deeply eroded; so to estimate its original size, researchers have had to rely heavily upon comparison to other terrestrial impact structures. Recent estimates of the original crater diameter range from 160 km to as much as 400 km. In this study, we combined the capabilities of both hydrocode and finite-element modeling, using the former to predict where the pressure of an impact-generated shock wave would have been high enough to form planar deformation features (PDFs) and shatter cones and the latter to follow the subsequent displacement of these shock isobars during the collapse of the crater. We established constraints on the sizes of the projectile and the transient crater (and, thus, on the size of the final crater) by comparing the observed locations of PDFs around Vredefort to the results of our simulations of impacts by projectiles of various sizes. These simulations indicate that a rocky projectile with a diameter of ～10 km, impacting vertically at a velocity of 20 km/s generates shock pressures that are consistent with the distribution of PDFs around Vredefort. These projectile parameters correspond to a transient crater ～80 km in diameter or a final crater ～120–160 km in diameter. Allowing for uncertainties in our modeling procedures, we consider final craters 120 to 200 km in diameter to be consistent with the observed locations of PDFs at Vredefort. The shock pressure contour corresponding to the formation of shatter cones is almost horizontal near the surface, making the locations of these features less useful constraints on the crater size. However, they may provide a constraint on the amount of erosion that has occurred since the impact.     

Origin and emplacement of the impact formations at Chicxulub,Mexico, as revealed by the ICDP deep drilling at Yaxcopoil‐1 and by numerical modeling

We present and interpret results of petrographic, mineralogical, and chemical analyses of the 1511 m deep ICDP Yaxcopoil‐1 (Yax‐1) drill core, with special emphasis on the impactite units. Using numerical model calculations of the formation, excavation, and dynamic modification of the Chicxulub crater, constrained by laboratory data, a model of the origin and emplacement of the impact formations of Yax‐1 and of the impact structure as a whole is derived. The lower part of Yax‐1 is formed by displaced Cretaceous target rocks (610 m thick), while the upper part comprises six suevite‐type allochthonous breccia units (100 m thick). From the texture and composition of these lithological units and from numerical model calculations, we were able to link the seven distinct impact‐induced units of Yax‐1 to the corresponding successive phases of the crater formation and modification, which are as follows: 1) transient cavity formation including displacement and deposition of Cretaceous “megablocks;” 2) ground surging and mixing of impact melt and lithic clasts at the base of the ejecta curtain and deposition of the lower suevite right after the formation of the transient cavity; 3) deposition of a thin veneer of melt on top of the lower suevite and lateral transport and brecciation of this melt toward the end of the collapse of the transient cavity (brecciated impact melt rock); 4) collapse of the ejecta plume and deposition of fall‐back material from the lower part of the ejecta plume to form the middle suevite near the end of the dynamic crater modification; 5) continued collapse of the ejecta plume and deposition of the upper suevite; 6) late phase of the collapse and deposition of the lower sorted suevite after interaction with the inward flowing atmosphere; 7) final phase of fall‐back from the highest part of the ejecta plume and settling of melt and solid particles through the reestablished atmosphere to form the upper sorted suevite; and 8) return of the ocean into the crater after some time and minor reworking of the uppermost suevite under aquatic conditions. Our results are compatible with: a) 180 km and 100 km for the diameters of the final crater and the transient cavity of Chicxulub, respectively, as previously proposed by several authors, and b) the interpretation of Chicxulub as a peak‐ring impact basin that is at the transition to a multi‐ring basin.