崩滑堰塞坝(湖)的地貌环境效应

崩滑堰塞坝(湖)具有显著的地貌环境效应,这种效应在时间尺度上分为短期和长期2种,主要表现在河流水文过程、地貌演变、环境生态、景观等方面.堰塞坝形成初期河流原有生境受到干扰,河流生态和景观出现退化.堰塞体溃决强烈改变下游水文过程及河流地貌,严重冲击河流生境和生态,并可能对下游基础设施和群众生命财产造成灾难性破坏.长期稳定维持的堰塞坝深刻影响河流地貌过程,并显著改善河流生境、生态,提升景观水平.堰塞坝(湖)是河床持续下切、岸坡失稳而自然反馈形成的裂点,能增加河流阻力,控制河床下切,如能长期维持是河流健康稳定的促进因素.     

Formation process of a large paleolandslide-dammed lake at Xuelongnang in the upper Jinsha River,SE Tibetan Plateau: constraints from OSL and <Superscript>14</Superscript>C dating

A large number of the landslide dams located on the major rivers at the southeastern margin of the Tibetan Plateau have been previously identified through remote sensing analysis and field investigations. The Xuelongnang paleolake was one of the lakes formed by these landslide dams in the upper Jinsha River, where the association of a relict landslide dam, lacustrine sediment, and outburst sediment is well preserved. This preservation provides an opportunity to better understand the formation, evolution, and longevity of a large landslide-dammed lake in the upper Jinsha River. It was inferred that the Xuelongnang dammed lake may have been formed by an earthquake-induced paleoavalanche. The surface area of the lake at its peak was estimated at 7.0?×?10⁶ m², and the corresponding volume was approximately 3.1?×?10⁸ m³. Two outburst flood events were determined to have occurred during the life span of the lake. Based on the 18 ages obtained from optically stimulated luminescence (OSL) and carbon-14 (¹⁴C) dating combined with stratigraphic sequences observed in the field, the paleolandslide-dammed lake was formed at approximately 2.1 ka and subsequently breached locally. The dammed lake was sustained for a period of some 900 years based on the chronological constraining. This study confirms that a major landslide-dammed lake can be sustained for at least hundreds of years and breached by several dam breaks in multiple periods, which contributed to the preservation of the knickpoints at millennial scale along the major rivers in the study area.     

A prototype experiment of debris flow control with energy dissipation structures

Large-volume debris flow events are defined when the volume of solid materials exceeds 1 million m³. Traditional engineering measures, such as check dams, diversion channels, and flumes, are effective for normal debris flow control but are not sufficient to control large-volume debris flows. Experiments were conducted with an artificial step-pool system on the new Wenjiagou Gully to mitigate large-volume debris flows. The old Wenjiagou Gully was buried by 81.6 million m³ of loose solid material created by a landslide that was triggered by the Wenchuan earthquake on May 12, 2008. The new gully was formed during the scouring process caused by debris flows in 2008. Large-volume debris flows were initiated by rainstorm flood with high kinetic energy. The artificial step-pool system was constructed with huge and big boulders on the new Wenjiagou Gully in 2009. The step-pool system dissipated flow energy in steps and hydraulic jumps. Analysis proved that the step-pool system dissipated two-third of the kinetic energy of flow; thus, the critical discharge for triggering debris flow increased threefold. Due to the step-pool system maximized the flow resistance and protected the bed sediment and banks from erosion, the rainstorm floods in 2009 did not trigger debris flows. In 2010, the step-pool system was replaced with 20 check dams. Huge boulders were broken into small pieces of diameter less than 0.5 m and were used as building materials for the 20 dams. Without the protection of the step-pool system, a rainstorm flood scoured the base of the dams and caused failures for all of the 20 check dams in August 2010. The flow incised the gully bed by 50 m. The loose bank materials slid into the flow mixed with water and formed a large-volume debris flow with a volume of 4.5 million m³. Many houses were buried by the debris flow, and 12 people were killed. Comparison of the two strategies proved that energy dissipation structures are necessary for controlling large-volume debris flows. Check dams, if they are stable, may reduce the potential of bank failures and control debris flows. The step-pool system dissipates flow energy and control gully bed incision and bank failure. A combination of check dams and step-pool systems may be the most effective for mitigating debris flows.     

Development of an empirical model for predicting peak breach flow of landslide dams considering material composition

The existing empirical models do not consider the influence of material composition of landslide deposits on the peak breach flow due to the uncertainty in the material composition and the randomness of its distribution. In this study, based on the statistical analyses and case comparison, the factors influencing the peak breach flow were comprehensively investigated. The highlight is the material composition-based classification of landslide deposits of 86 landslide cases with detailed grain-size distribution information. In order to consider the geometric morphology of landslide dams and the potential energy of dammed lakes, as well as the material composition of landslide deposits in an empirical model, a multiple regression method was applied on a database, which comprises of 44 documented landslide dam breach cases. A new empirical model for predicting the peak breach flow of landslide dams was developed. Furthermore, for the same 44 documented landslide dam failures, the predicted peak breach flow obtained by using the existing empirical models for embankment and landslide dams and that obtained by using the newly developed model were compared. The comparison of the root mean square error (E_rms) and the multiple coefficient of determination (R²) for each empirical model verifies the accuracy and rationality of the new empirical model. Furthermore, for fair validation, several landslide dam breach cases that occurred in recent years in China and have reliable measured data were also used in another comparison. The results show that the new empirical model can reasonably predict the peak breach flow, and exhibits the best performance among all the existing empirical models for embankment and landslide dam breaching.

     

The 12 May Wenchuan earthquake-induced landslide lakes: distribution and preliminary risk evaluation

The Wenchuan earthquake, measured at M _s 8.0 according to the China Earthquake Administration, occurred at 14:28 on 12 May 2008 in the Sichuan Province of China. It brought overwhelming destruction to eight provinces and cities. Landslides and rock avalanches triggered by the earthquake produced 257 landslide lakes which were distributed along the fault rupture zone and river channels. The authors traveled to the disaster zone immediately after the earthquake to examine some of the features of the debris dams and performed a quick evaluation of the potential for outburst of earthquake-induced landslide lakes for the purpose of disaster relief. The preliminary analysis indicated that the landslide lakes could be classified as those exhibiting extremely high risk, medium risk, and low risk according to field observations and remote sensing, to determine material composition, dam structure, dam height, maximum water storage capacity, and size of the population potentially affected area. The failure risk of 21 debris dams were evaluated as follows: one dam with an extremely high danger risk, seven dams with a high danger, five dams with a medium danger, and eight dams of low danger. More concern was given to the Tangjiashan Lake and different scenarios for the potential sudden failure of its dam were assessed. The risk evaluation result was accepted in full, by the earthquake disaster relief office. A successful emergency dam treatment for risk reduction was planned, based on our assessments, and these measures were quickly carried out. According to this research, the earthquake destabilized the surrounding mountains, resulting in a prolonged geohazard for the area. Landslides and debris flows will continue to develop for at least 5 to 10 years after the Wenchuan earthquake and will produce additional dammed lakes. Recommendations and plans for earthquake–landslide lake mitigation were proposed, based on past successful practices.     

Rock avalanching into a landslide-dammed lake causing multiple dam failure in Las Conchas valley (NW Argentina) — evidence from surface exposure dating and stratigraphic analyses

Generally landslide dams which exist for several hundreds to thousands of years are considered as stable. We show with an example from the Argentine Andes that such dams can exist for several thousands of years but still may fail catastrophically. Multiple rock avalanches impounded two lakes with surface areas of ~8 km² and ~600 km², respectively, in Las Conchas valley, NW Argentina. Surface exposure dating (SED) by ¹⁰Be of the rock-avalanche deposits or landslide scars indicates that these landslides occurred at 15,300±2,000 yr and 13,550±900 yr. The dams were stable during a strong earthquake, as suggested by seismites within related lake sediments and by multiple coeval landslides in this region, which occurred at ~7.5 kyr. However, when a further rock-avalanche fell into the lower, smaller lake at 4,800±500 yr the dam downriver was destroyed, presumably by the resulting tsunami wave. The resulting flood also destroyed an additional rock-fall dam which had formed at ~5,630 yr ¹⁴C cal BP 30 km downriver. The new dam formed by the second rock avalanche was eroded prior to 3,630 yr ¹⁴C cal BP. This dam erosion coincides with an important climatic shift towards more humid conditions in the Central Andes. Our results show that instead of direct effects of strong seismicity on landslide dams, (1) landsliding into a landslide-dammed lake, (2) abrupt hydrological changes, and (3) climate change towards conditions related to enhanced run-off are processes which can produce failures of quasi-stable natural dams.     

Knickpoints along the upper Indus River,Pakistan: an exploratory survey of geomorphic processes

This article summarizes an exploratory study carried out to investigate the significance of various geomorphic features on the formation of observed knickpoints along the upper Indus River in northern Pakistan. These features include bedrock lithology, active faults, sediment flux from tributary channels, and landslide dams which have blocked the main channel. The knickpoints and their related geomorphic parameters (channel profile, concavity, drainage area and normalized steepness index, etc.) were extracted from Advanced Spaceborne Thermal Emission and Reflection (ASTER) Global Digital Elevation Models (GDEMs) with 30 m resolution using ArcGIS, River Tools, and Matlab software. A total of 251 major and minor knickpoints were extracted from the longitudinal profile along a ~ 750 km reach upstream of Tarbela Reservoir. The identified knickpoints and their respective normalized steepness index (k_sn values) were compared with bedrock lithology, mapped faults, regional landslide/rockslide inventory, and the locations of historic landslide dams. The analyses revealed that the knickpoints do not correlate with the bedrock lithology except where major unit boundaries coexist with mapped faults, especially in reaches criss-crossed by active thrust faults in the Nanga Parbat Haramosh (NPHM) region. Neither did the river’s major confluences exhibit any notable knickpoints, but the correlations between knickpoints, mapped landslides, and historic rockslide avalanche dams accounted for approximately 75% of the observed knickpoints, a surprising finding. These observations suggest that more detailed studies aided by high resolution data should be undertaken to further explore the characteristics of knickpoints triggered by tectonic uplift, local fault offset, bedrock erodibility, and landslide/rockslide dams.     

Some considerations about the simulation of breach channel erosion on landslide dams

The analysis of the flood hazard related to the areas downstream of landslide dams is one of the most interesting aspects of studying the formation and the failure of natural dams. The BREACH code [14], simulating the collapse of earthen dams, both man-made and naturally formed by a landslide, was chosen in order to analyse the case of the Valderchia landslide (central Italy). The bed-load transport formula used in BREACH (Meyer-Peter and Muller, modified by Smart [27]) is based on flume experiments with well-sorted sediments. Such a methodology probably makes this equation not very suitable for describing the sediment transport peculiar to a landslide body presenting a very poor material sorting. The Schoklitsch [26] formula was implemented into the programme as an alternative to the Smart equation. However, because the landslide deposits may often have a strongly bimodal grain–size frequency curve, the percentile D ₅₀ (the typical granulometric parameter requested by bed-load sediment transport formulas) can sometimes correspond to one of the grain-size classes which are really present to a lesser degree. To consider this phenomenon, the BREACH programme (version 7/88-1) was implemented with a new procedure that calculates two granulometric curves, one for each mode of the original distribution, and evaluates transport of the landslide material separately. Results of the analysis show that the model is very sensitive to the bed-load equation and that the procedure implemented to consider the eventual bimodal distribution of the dam material simulates the armouring phenomenon (which can stop the erosion of the dam during the overtopping phase).     

河流堰塞的地貌响应

堰塞作为一种极端地表过程,深刻影响着河流地貌的变化,特别是河流纵剖面的变化。其对河流纵剖面的影响主要体现在两方面:一方面,堰塞坝将抬高局地的侵蚀基准面,阻碍了上游河道侵蚀,形成河流裂点;另一方面,堰塞坝溃决往往形成大型/巨型洪水,造成下游河道和岸坡的剧烈侵蚀。稳定的堰塞坝形成后,在1~105 a的时间尺度上对河流裂点的发育以及河流纵剖面变化上甚至会超过构造、气候和岩性作用,占据主导。本文在简要概述堰塞地貌相关概念的基础上,介绍了部分河流堰塞的研究方法和案例,以及河流堰塞的发育过程和研究意义。目前多仅从堰塞坝与河流纵剖面的空间关系的相关性来论证其地貌响应,并且发现一些堰塞坝与河流纵剖面的相关性,但是也有一些古堰塞坝对现代河流纵剖面的影响并不显著,原因可能与堰塞坝规模、溃决洪水次数、堵江的持续时间和距今年代的不同有关,目前还缺乏深入研究。     

Formation,failure, and consequences of the Xiaolin landslide dam,triggered by extreme rainfall from Typhoon Morakot,Taiwan

An extreme rainfall event on August 9, 2009, which was close to setting a world record for 48-h accumulated rainfall, induced the Xiaolin deep-seated landslide, which was located in southwestern Taiwan and had volume of 27.6?×?10⁶?m³, and caused the formation of a landslide dam. The landslide dam burst in a very short time, and little information remained afterward. We reconstructed the process of formation and failure of the Xiaolin landslide dam and also inferred the area of the impoundment and topographic changes. A 5?×?5-m digital elevation model, the recorded water stage of the Qishan River, and data from field investigation were used for analysis. The spectral magnitude of the seismic signals induced by the Xiaolin landslide and flooding due to failure of the landslide dam were analyzed to estimate the timing of the dam breach and the peak discharge of the subsequent flood. The Xiaolin landslide dam failure resulted from overtopping. We verified the longevity of the Xiaolin landslide dam at about 2 h relying on seismic signals and water level records. In addition, the inundated area, volume of the impoundment behind the Xiaolin landslide dam, and peak discharge of the flood were estimated at 92.3 ha, 19.5?×?10⁶?m³, and 17?×?10³?m³/s, respectively. The mean velocity of the flood-recession wave front due to the dam blockage was estimated at 28 km/h, and the peak flooding velocity after failure of the dam was estimated at 23 km/h. The Xiaolin landslide provides an invaluable opportunity for understanding the mechanism of deep-seated landslides and flooding processes following a landslide dam failure.     

Morphological analysis and features of the landslide dams in the Cordillera Blanca,Peru

Global warming in high mountain areas has led to visible environmental changes as glacial retreat, formation and evolution of moraine dammed lakes, slope instability, and major mass movements. Landslide dams and moraine dams are rather common in the Cordillera Blanca Mountains Range, Peru, and have caused large damages and fatalities over time. The environmental changes are influencing the rivers’ and dams’ equilibrium, and the potential induced consequences, like catastrophic debris flows or outburst floods resulting from dam failures, can be major hazards in the region. The studies of past landslide dam cases are essential in forecasting induced risks, and specific works on this topic were not developed in the study region. Reflecting this research gap, a database of 51 cases and an evolution study of landslide dams in the Cordillera Blanca Mountains is presented. The main morphometric parameters and information of the landslide, the dam body, the valley, and the lake, if any, have been determined through direct and indirect survey techniques. Low variability in some of the main morphometric parameter distributions (valley width and landslide volume) has been shown, most likely due to an environmental control connected to the regional tectonic and glacial history. In order to analyze present and future landslide dam evolution, a morphological analysis was carried out using two recently developed geomorphological indexes employed on the Italian territory. The results of the Cordillera Blanca analysis have been compared with a large Italian landslide dam inventory, highlighting as much the differences as the similarities between the two datasets. The long-term geomorphological evolution changes are evaluated. Many of the stable dams are in disequilibrium with their surrounding environment and their classification result is of “uncertain determination.”     

Logistic regression model for predicting the failure probability of a landslide dam

Landslides may obstruct river flow and result in landslide dams; they occur in many regions of the world. The formation and disappearance of natural lakes involve a complex earth–surface process. According to the lessons learned from many historical cases, landslide dams usually break down rapidly soon after the formation of the lake. Regarding hazard mitigation, prompt evaluation of the stability of the landslide dam is crucial. Based on a Japanese dataset, this study utilized the logistic regression method and the jack-knife technique to identify the important geomorphic variables, including peak flow (or catchment area), dam height, width and length in sequence, affecting the stability of landslide dams. The resulting high overall prediction power demonstrates the robustness of the proposed logistic regression models. Accordingly, the failure probability of a landslide dam can also be evaluated based on this approach. Ten landslide dams (formed after the 1999 Chi-Chi Earthquake, the 2008 Wenchuan Earthquake and 2009 Typhoon Morakot) with complete dam geometry records were adopted as examples of evaluating the failure probability. The stable Tsao-Ling landslide dam, which was induced by the Chi-Chi earthquake, has a failure probability of 27.68% using a model incorporating the catchment area and dam geometry. On the contrary, the Tangjiashan landslide dam, which was artificially breached soon after its formation during the Wenchuan earthquake, has a failure probability as high as 99.54%. Typhoon Morakot induced the Siaolin landslide dam, which was breached within one hour after its formation and has a failure probability of 71.09%. Notably, the failure probability of the earthquake induced cases is reduced if the catchment area in the prediction model is replaced by the peak flow of the dammed stream for these cases. In contrast, the predicted failure probability of the heavy rainfall-induced case increases if the high flow rate of the dammed stream is incorporated into the prediction model. Consequently, it is suggested that the prediction model using the peak flow as causative factor should be used to evaluate the stability of a landslide dam if the peak flow is available. Together with an estimation of the impact of an outburst flood from a landslide-dammed lake, the failure probability of the landslide dam predicted by the proposed logistic regression model could be useful for evaluating the related risk.     

Amplification effect of cascading breach discharge of landslide dams

Landslides - Affected by earthquakes and heavy rainfall, multiple landslide dams often cluster closely together along river reaches or gullies. Compared with a single landslide dam, the burst flood...     

Landslide dam failure and flood hydraulics. Part I: experimental investigation

Landslide dam failure can trigger catastrophic flooding in the downstream. However, field observation of such flooding is rarely available, while laboratory experimental studies are sparse. The mechanism of landslide dam failure and the flood has so far remained insufficiently understood. Here, we present an experimental investigation of landslide dam failure and the flood. A total of 28 runs of experiments are carried out in a flume of 80 m × 1.2 m × 0.8 m, with differing inflow discharge, dam composition, dam geometry, and initial breach dimension. An array of twelve automatic water-level probes is deployed to measure the stage hydrographs along the flume, and the video recording of the dam failure processes facilitates an estimation of the widening of initial breach. Under the present experimental conditions with dams composed of homogeneous materials, landslide dam failure is primarily caused by erosion of overtopping flow, and lateral mass collapse is also considerable during the cause of breach widening. Cohesive clay may act to mitigate the seepage through the dam and thus its subsidence and appreciably modulate the dam failure process and the flood. However, the impacts of clay may be readily overwhelmed by a large inflow discharge and initial breach. Gravels in the dam may appreciably depress the rate of the dam failure process and thus modify the flood. The present work provides new experimental data set for testing mathematical models of the flood flow due to landslide dam failure.     

Risk assessment and mitigation for the Hongshiyan landslide dam triggered by the 2014 Ludian earthquake in Yunnan,China

An Ms 6.5 earthquake shocked the Ludian County, Yunnan Province, China, on 3 August 2014 and triggered the Hongshiyan landslide dam. The dam, with a height of 83 m and a lake capacity of 260?×?10⁶ m³, threatened more than 10,000 people. A unique feature of this landslide dam was that it formed between a man-made dam and a hydropower plant. An existing drainage tunnel connecting the lake and the hydropower plant became a natural drainage conduit for the landslide dam, which played an important role in the mitigation of the landslide dam risks. This paper reports a quantitative risk assessment for the Hongshiyan landslide dam considering both engineering and non-engineering risk mitigation measures. The risk assessment is divided into three stages according to the implementation of two engineering measures: construction of a diversion channel and excavation of a branch drainage tunnel. The dam breaching hydrographs, flood zones, population at risk, and likely fatalities in each of the three stages are analysed. The optimum evacuation strategy in each stage is also studied based on the principle of minimum total consequence. It is found that the diversion channel decreases the dam breaching peak discharge and the associated risks significantly. The branch drainage tunnel prevent the landslide dam from overtopping failure in non-flooded period; however, the landslide dam may fail by overtopping in a future flood if the inflow rate is larger than the outflow rate through the drainage tunnels, resulting in serious losses of lives and properties. The dam breaching risks in all the three stages could be largely reduced by the optimal evacuation decision, which shows that timely evacuation is vital to save life and properties. The study provides a scientific basis for decision making in landslide dam risk management.     

堰塞坝溃坝模型实验研究综述

堰塞坝是天然形成的坝体,结构比较松散、稳定性差、渗透作用强,发生溃决危险性大、概率高、突发性强,而且破坏可能性高及产生的洪水威胁人们的生命和财产安全,因此需要系统、全面的研究。作者从单坝溃坝、级联溃坝及堰塞坝处置的溃坝试验进行详细的回顾,总结及分析了国内外学者在堰塞坝溃坝模型实验取得的成果及局限性,进一步分析了单坝溃决的颗粒级配、密实度、含水率、沟床坡度等因素,最后讨论了溃坝因素与溃决模式、溃决特征、溃决流量、溃口演化的关系。基于模型实验相似理论及模型比尺、实验测试手段、堰塞坝处置三个方面,提出了今后的研究重点。     

Reconstruction and effects of a failure of a typical check dam system under an extreme rainstorm on the Loess Plateau,China

Check dam systems are extensively utilized on the Loess Plateau. However, the development of the check dam system is restrained due to the failure hazard. To investigate the failure process of the check dam system and the corresponding effect, a hydrodynamic simulation was conducted in this study based on the failure of a typical check dam system, which occurred on 15 July 2012. The simulation was regarded as satisfactory based on verification with observed data of the peak discharge at the outlet of the catchment (NSE?=?0.61, R²?=?0.83), breaches of damaged check dams (relative error?<?20%) and maximum water depths in the front of 2 check dams (relative error of ? 13.4% and?+?4%). The simulation results indicated that the series failure in the tributary ditch did not cause the stack of peak discharges, and the peak flood discharge at the outlet of the catchment in this failure increased 20% compared to the status without dam-break and decreased 87% compared to the status without check dam.

     

Usoi Dam Wave Overtopping and Flood Routing in the Bartang and Panj Rivers, Tajikistan

The Usoi dam was created in the winter of 1911 after an enormous seismogenic rock slide completely blocked the valley of the Bartang River in the Pamir Mountains of southeastern Tajikistan. At present the dam impounds 17 million cubic meters of water in Lake Sarez. Flood volume and discharge estimates were made for several landslide generated floods that could overtop the dam. For landslide volumes of 200, 500, and 1,000 million cubic meters, estimated overtopping flood volumes were 2, 22, and 87 million cubic meters of water, respectively. Estimated peak discharge at the dam for these three flood scenarios were 57,000, 490,000, and 1,580,000 m³/s, based on triangular hydrographs of 70-, 90-, and 110-s durations, respectively. Flood-routing simulations were made for the three landslide-induced overtopping floods over a 530-km reach of the Bartang and Panj Rivers below the Usoi dam. A one-dimensional flow model using a Riemann numerical solution technique was selected for the analysis. For the 87 million cubic meter volume overtopping flood scenario, the peak flows were approximately 1, 100, 800, and 550 m³/s at locations 50, 100, and 150 km downstream of the dam respectively.     

堰塞湖应急处置实践与认识

堰塞湖是由于山体滑坡、崩塌、泥石流等堵塞河道形成的没有经过专门设计、没有专门的泄水设施的湖泊,一旦溃决,容易给下游造成巨大的灾难。分析了堰塞湖的成因、溃决机理与风险判断,提出堰塞湖应急处置的原则、理念、阶段与处置方法,总结了堰塞湖应急处置中的一些经验和认识。以四川省汶川特大地震形成的堰塞湖应急处置为例,从可能溃决方式、溃坝洪水、应急除险总体方案、开渠引流方案和除险效果等方面,介绍了唐家山堰塞湖的应急处置实践,并简要介绍了其它一些堰塞湖应急处置。     

Landslide hazards triggered by the 2008 Wenchuan earthquake, Sichuan, China

The 2008 Wenchuan earthquake (M _s = 8.0; epicenter located at 31.0° N, 103.4° E), with a focal depth of 19.0 km was triggered by the reactivation of the Longmenshan fault in Wenchuan County, Sichuan Province, China on 12 May 2008. This earthquake directly caused more than 15,000 geohazards in the form of landslides, rockfalls, and debris flows which resulted in about 20,000 deaths. It also caused more than 10,000 potential geohazard sites, especially for rockfalls, reflecting the susceptibility of high and steep slopes in mountainous areas affected by the earthquake. Landslide occurrence on mountain ridges and peaks indicated that seismic shaking was amplified by mountainous topography. Thirty-three of the high-risk landslide lakes with landslide dam heights greater than 10 m were classified into four levels: extremely high risk, high risk, medium risk, and low risk. The levels were created by comprehensively analyzing the capacity of landslide lakes, the height of landslide dams, and the composition and structure of materials that blocked rivers. In the epicenter area which was 300 km long and 10 km wide along the main seismic fault, there were lots of landslides triggered by the earthquake, and these landslides have a common characteristic of a discontinuous but flat sliding surface. The failure surfaces can be classified into the following three types based on their overall shape: concave, convex, and terraced. Field evidences illustrated that the vertical component of ground shaking had a significant effect on both building collapse and landslide generation. The ground motion records show that the vertical acceleration is greater than the horizontal, and the acceleration must be larger than 1.0 g in some parts along the main seismic fault. Two landslides are discussed as high speed and long runout cases. One is the Chengxi landslide in Beichuan County, and the other is the Donghekou landslide in Qingchuan County. In each case, the runout process and its impact on people and property were analyzed. The Chengxi landslide killed 1,600 people and destroyed numerous houses. The Donghekou landslide is a complex landslide–debris flow with a long runout. The debris flow scoured the bank of the Qingjiang River for a length of 2,400 m and subsequently formed a landslide dam. This landslide buried seven villages and killed more than 400 people.