铜陵中酸性侵入岩同源包体特征及岩浆动力学

铜陵地区中生代中酸性侵入岩的钙碱性系列岩石中,发育同源浅源包体(闪长质微粒包体),而碱性系列岩石中发育同源深源包体(辉石岩和角闪石岩)。它们在矿物化学、稀土微量元素地球化学特征方面与其寄主岩石具有相似性,但在形成的物理化学条件和岩浆动力学特征方面存在一定的差异。反映了它们是同源岩浆在不同岩浆作用阶段的产物,即深源包体来自深位岩浆房中的堆积岩碎块,而浅源包体则来自浅位岩浆房的冷凝边碎块。     

微花岗岩类包体与岩浆的扩散作用和熔离作用——以诸广山桂东、上堡岩体为例

诸广山加里东期桂东及上堡黑云母花岗闪长岩体中的微花岗岩类包体包括同源包体和析离体。同源包体与寄主岩的暗色矿物组成不同,主要含角闪石;析离体与寄主岩中的暗色矿物组成相同,主要含黑云母。包体与寄主岩的矿物、岩石化学、地球化学及产状特征对比表明,这两种包体的形成涉及到岩浆内部组分的相互扩散、岩浆的熔离、对流及派生岩浆的相互混合。形成微花岗岩类包体的偏基性岩浆大多数是中酸性岩浆自身演化的产物。微花岗岩类包体的形成是岩浆结晶过程的记录。     

铜陵地区中酸性侵入岩及其包体的成因和矿物温压计的应用

铜陵地区中酸性侵入岩可划分为橄榄安粗岩系列和高钾钙碱性系列。前者岩石组合为辉石二长闪长岩+二长岩+石英二长岩,后者为辉长闪长岩+石英二长闪长岩+花岗闪长岩。两个系列岩石的组成矿物种类相似,但在不同岩石中的含量不同,主要造岩矿物为斜长石、辉石、角闪石、黑云母、钾长石、石英。橄榄安粗岩系列岩石中含有大量的深源包体,包括辉石堆积岩包体、角闪石堆积岩包体和角闪石辉长质堆积岩包体,主要矿物为辉石、角闪石,其次为尖晶石、斜长石、磷灰石、金云母;高钾钙碱性系列岩石中含大量的微粒闪长质包体、镁铁质石英二长闪长质包体和富云母包体,主要矿物为斜长石、角闪石、黑云母。在考虑温压计使用条件的前提下,选择合适的温压计计算了两个系列侵入岩及包体形成的温压条件。结果表明,橄榄安粗岩系列侵入岩侵位深度(4～6km)略小于高钾钙碱性系列侵入岩(6～7km),各种堆积包体形成于45～65km的深位岩浆房,微粒闪长质包体形成于12～15km的浅位岩浆房,镁铁质石英二长闪长质包体是早期侵入岩的边缘相,而富云母包体可能为地壳部分熔融的残余相。     

安徽铜陵中生代侵入岩及其岩石包体中的硫化物-氧化物包裹体研究

安徽铜陵地区中生代岩浆活动频繁,形成了一系列与铜、金多金属成矿作用关系密切的中酸性侵入岩。在这些侵入岩中分布有大量的镁铁质团块、堆积晶和微粒闪长质包体。在这些侵入岩及其岩石包体中观察到了一定数量的硫化物-氧化物包裹体。文章对老庙基、小铜官山和小陶家岩体及其岩石包体中的硫化物-氧化物包裹体进行了详细的岩相学观察和电子探针分析。观察和分析结果显示,镁铁质团块中硫化物包裹体内的矿物主要有磁黄铁矿、黄铜矿、单硫化物固溶体和镍黄铁矿,这些硫化物相(黄铜矿除外)中的Ni、Cu平均含量(wB,下同)分别为6.91%和0.44%;微粒闪长质包体和寄主岩中硫化物包裹体内的矿物主要为磁黄铁矿和黄铜矿,这些硫化物相(黄铜矿除外)中的Ni、Cu平均含量分别为0.44%、0.07%(微粒闪长质包体)和0.09%、0.42%(寄主岩)。镁铁质团块、微粒闪长质包体和寄主岩中氧化物包裹体内的矿物分别为铬磁铁矿(Cr2O3平均含量为4.44%)、磁铁矿(Cr2O3平均含量为0.44%)和磁铁矿(Cr2O3平均含量为0.07%);散布的氧化物颗粒分别为铬磁铁矿(Cr2O3平均含量为6.58%)、磁铁矿+铬磁铁矿(Cr2O3平均含量为0.86%)...     

安徽铜陵岩浆岩中辉长质岩石包体的发现及其地质意义

在安徽铜陵白芒山、老庙基和小铜官山岩体中发现了3个辉长质岩石包体。报道了这些辉长质岩石包体及其寄主岩的岩相学观察以及矿物电子探针和全岩岩石化学、微量元素、稀土元素和锶钕同位素分析资料,总结了辉长质岩石包体的特征,讨论了它们的地质意义。该区辉长质岩石包体主要有两类。一类具“斑状”结构,“斑晶”主要是斜长石和角闪石。“基质”具微粒半自形一自形等粒状结构,主要矿物成分为斜长石和角闪石;另有少量黑云母,有时还有少量辉石。另一类具辉长结构,主要由辉石、斜长石、角闪石和黑云母组成。本区辉长质岩石包体低铝高镁和富碱,其Cr,Co和Ni的含量明显偏高,重稀土元素,特别是钇相对富集,(^87Sr／^86Sr)．为0．7063到0．7069,εNd(t)为-4．9～-8．8,与大陆裂谷碱性玄武岩的特征一致,表明本区此时属于拉张环境。研究还表明,铜陵地区不具“斑状”结构的辉长质岩石包体是由底侵的碱性玄武岩浆在约26km深处的深位岩浆房中直接冷凝结晶形成的。本区具“斑状”结构的辉长质岩石包体中的“斑晶”由闪长质岩浆在8～13km深处的中位岩浆房中发生结晶分异作用形成,而“基质”是在“斑晶”形成以后,由深位岩浆房中的中基性演化岩浆上侵到中位岩浆房,并围绕早期“斑晶”矿物结晶而形成。     

安徽铜陵典型矿区岩石包体研究及其岩浆——成矿作用过程探讨

铜陵地区岩浆岩中产有两类石包体,一类为属高于高角闪岩相的变质岩（残余）包体;另一类为属于二长岩－闪长岩类的岩浆岩包体,对这两类岩石包体进行了详细的岩石学和矿物学研究,并计算了了各类岩石包体的形成条件,在此基础上探讨了岩石包体与寄主岩浆岩之间的关系,分析了岩浆岩和有关矿床的物质来源和成岩成矿作用机制,提出了深部古老变质基底部分融－岩浆积聚,分异,并在不同层位就形,形成深位和浅位岩浆房－不同成分的岩浆混合－气液隐爆迁移沉淀这样一种与同熔型岩浆岩有关的新的层控矽卡岩矿床成矿模式。     

铜官山铜矿床矽卡岩矿物中流体包裹体及子矿物的扫描电镜研究

通过对安徽铜官山铜矿矽卡岩矿物中的流体包裹体岩相学、包裹体显微测温分析及子矿物的扫描电镜／能谱分析(SEM／EDS)和激光拉曼探针分析(LRM)，发现石榴石、透辉石中的包裹体为流体包裹体，包裹体的均一温度(575～885℃)、盐度[w(NaCleq)13．4％～44．9％]均较高，流体包裹体中的子矿物有黄铜矿、闪锌矿、方解石、菱铁矿、钾石盐和石盐，以钾石盐最为普遍，表明流体高度富钾，具岩浆热液的典型特征。富钾流体也与该区广泛出露的燕山期高钾富碱岩体吻合。     

安徽铜陵铜官山矿区中生代侵入岩的形成过程——岩浆底侵、同化混染和分离结晶

对安徽铜陵铜官山矿区的小铜官山岩体进行了SHRIMP锆石U-Pb定年,并对天鹅抱蛋山岩体及其辉长岩和闪长岩包体进行了全岩主量元素和稀土元素以及锶 钕同位素分析,结合对区内老庙基山和小铜官山岩体及其辉长岩和闪长岩包体的岩石学和地球化学资料的综合整理,讨论了这些岩体及其包体的成因。小铜官山岩体的SHRIMP锆石U-Pb年龄为(139.5±2.9 ）Ma,表明它属于长江中下游晚侏罗世-早白垩世岩浆作用的产物。辉长岩和闪长岩包体具有低w(SiO₂)(52.03%~54.61 %）、w(Al₂O₃)(12.87%~14.43 %)和全碱含量w(Na₂O+K2O)(5.26%~6.30 %）, 但高w(MgO)(5.41%~11.66 %）的特征;寄主岩与此相反,具有高w(SiO2)(59.97%~64.44 %）、w(Al₂O₃)(16.43%~17.59 %）和全碱含量(6.67%~8.25 %）,但低w(MgO)(1.52%~2.50 %）的特征。辉长岩和闪长岩包体的稀土元素总量为165.70×10^-6~190.40×10^-6,寄主岩的稀土元素总量为166.12×10^-6~185.95×10^-6,二者十分相近,它们的稀土元素球粒陨石标准化配分模式也十分相似。但辉长岩和闪长岩包体的轻、重稀土比值为3.39~4.27,明显小于寄主岩的轻、重稀土比值(4.86~5.94）。辉长岩和闪长岩包体具明显的正铕异常,而寄主岩具有弱负铕异常。从辉长岩到寄主岩,ε Nd (t) 从-4.9~-9.9减小到-11.4~-11.9,(⁸⁷Sr/⁸⁶Sr)_o 从0.706 4~0.707 3增加到0.707 2~0.708 4。上述资料表明,铜陵铜官山矿区晚侏罗世-早白垩世侵入岩及其辉长岩和闪长岩包体可能是由基性到中酸性岩浆通过幔源岩浆底侵、同化混染和分离结晶过程形成的,而基性到中酸性岩浆则是由底侵的玄武岩浆与不同量的中下地壳物质发生一系列复杂的相互作用形成的。     

Genesis and geological significance of sulfide bearing mafic enclaves and host syenite in Heishishan,East Kunlun: Evidence from geochronology,mineralogy, geochemistry and Sr-Nd-Hf isotopesSCIEI北大核心CSCD

黑石山铜铅锌矿床位于东昆仑造山带中段的五龙沟地区,矿区内的石英二长岩-正长岩发育有暗色微粒包体,本研究在包体中发现了硫化物。锆石U-Pb定年显示,正长岩形成于239.4±1.0Ma,具有富Si和K,贫Mg、Cr、Ni,明显的Eu负异常,富集大离子亲石元素、亏损高场强元素,较为富集的Sr-Nd-Hf同位素特征。暗色微粒包体由斜长石和角闪石组成,可见角闪石堆晶,贫硅、富钙、铝、碱和铁,Mg#值为38.37,具有明显的Eu负异常,轻重稀土分馏弱。结合宿主正长岩和暗色包体的矿物成分相似性和岩相学特征,本文认为暗色微粒包体与正长岩来自同一个岩浆房,属于同源岩浆包体,是岩浆房早期分离结晶相,被中酸性岩脉携带上升至正长岩熔体中,一起侵位至浅部地壳。综合岩石地球化学、同位素和矿物成分,本文认为正长岩是下地壳含水镁铁质岩石在压力较低条件下部分熔融的产物。暗色微粒包体中发育硫化物,且包体岩浆的硫含量远高于正长岩岩浆,指示岩浆房的早期分离结晶相带走了硫,使残余熔体贫硫。     

普朗斑岩铜矿岩浆混合作用：岩石学及元素地球化学证据

普朗斑岩铜矿花岗闪长斑岩中存在大量的随机分布的镁铁质微粒包体,包体与寄主岩存在渐变接触关系。包体成分为闪长质,具有岩浆结构,存在针状磷灰石,显示了快速冷却结晶的特征。包体内可见具有暗色矿物镶边的眼球状石英,表明存在岩浆混合作用。寄主岩岩体规模较小,呈岩枝状产出,包体和寄主岩均为似斑状结构,说明两种岩浆侵位和发生岩浆混合作用的深度较浅。元素地球化学特征显示包体与寄主岩的之间有成分交换。包体和寄主岩强不相容元素均富集,高场强元素Nb、Ta、Ti均表现出显著的负异常,具有典型的岛弧岩浆岩的微量元素特征,包体和寄主岩Mg＃较高,在同等Si条件下比玄武岩部分熔融体富K2O和MgO,意味着源区必须有幔源岩浆的贡献。普朗斑岩铜矿蚀变矿化模式反映了其成矿环境偏基性,暗示镁铁质岩浆的加入对成矿具有贡献。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。