共查询到18条相似文献,搜索用时 171 毫秒
1.
2.
再分析资料计算中国区域对流层延迟精度 总被引:2,自引:1,他引:1
针对欧洲中期天气预报中心(ECMWF)提供的ERA-Interim气压分层再分析资料在中国区域对流层延迟解算的适用性问题,该文基于中国大陆构造环境监测网络(CMONOC)约260个GPS基准站,以GPS PPP事后精密处理结果作为参考,给出了相应的精度评估与时空分布特征分析,结果表明:再分析资料在中国区域对流层延迟的平均偏差和均方根误差分别为0.39cm和1.37cm,时空分布上存在明显差异,另外指出了再分析资料时间分辨率不足,难以反映对流层延迟日内变化的问题。为进一步研究对流层空间关系以及垂直变化特征,精化对流层改正模型提供参考。 相似文献
3.
《测绘科学技术学报》2013,(4)
信息技术的发展极大地推动了CORS站网数据处理理论与应用的研究进展。本文针对单机处理大型CORS网基线时站点规模受限和时效性差的问题,研究了基线解算的分布式处理流程和方法。应用分布式文件系统(HDFS)建立了CORS网数据的分布式存储和传输功能,基于Bernese处理引擎(BPE)实现了Bernese 5.0功能模块的并行化调用,基于Ambizap算法建立了分布式PPP解算和分布式独立基线解算的基线向量整网解算方法。算例表明,8个节点处理109个测站1 d的30 s采样间隔观测数据,比单机集中处理的加速比提高了6倍。 相似文献
4.
由于全球卫星导航系统(GNSS)技术广泛应用,各个领域行业对GNSS数据处理的精度和效率提出了更高要求,本文基于GAMIT/GLOBK 10.7与Bernese 5.2软件对中国大陆构造环境监测网络(CMONOC)观测数据进行解算,并对解算策略的确定和解算结果进行对比分析,实验结果表明:GAMIT 10.7和Berne... 相似文献
5.
非差精密单点定位(PPP)是大规模GNSS网络数据处理的主要模式之一。分析了基于Bernese自动处理引擎BPE的非差定位解算流程,通过修改配置文本文件实现BPE功能自动调用。针对单机集中处理模式下解算规模受限、时效性差的问题,采用分布式技术,利用C#编程实现了GNSS精密单点定位的并行处理。采用IGS数据进行实验,算例结果表明:在分布式环境下调用Bernese自动解算功能进行并行数据处理,能够实现快速、准确的GNSS大网高精度PPP定位解算,计算效率明显提高。 相似文献
6.
7.
8.
中国大陆构造环境监测网络由260个连续全球定位系统观测站点和2 000个不定期全球定位系统观测站点构成,一般采用GAMIT或Bernese高精度数据处理软件进行处理。由于GAMIT及Bernese软件对测站数处理能力的限制,必须对陆态网连续运行基准站进行分区解算。针对这一问题,为研究不同分区方案对陆态网解算精度的影响,该文基于全国55个陆态网络连续运行基准站数据,采用整网解算方案以及间距分区法和区域子网划分法分别进行解算,并以整网解算结果作为标准值,对比两种分区方案与整网解算方案的基线长度差及坐标差。结果表明,间距分区方案解算精度比区域子网划分方案精度高,可实现对陆态网分区的高精度解算。最后利用间距分区法对全国240个陆态网络连续运行基准站进行分区解算,得到了较高精度的解算结果。 相似文献
9.
参数设置对高精度GPS数据解算的影响探讨 总被引:1,自引:0,他引:1
在高精度GPS数据处理过程中,如何满足解算精度的要求并获取理想的可降水量估值值得研究。文章以GAMIT软件不同参数设置及气象数据的使用为解算方案,并以香港卫星定位参考站数据作为实例分析,结果表明:从基线解算精度角度,对流层天顶延迟参数设置及有无气象数据参与对解算精度影响很小,有利于利用GAMIT软件获取更高时间分辨率气象参数;从气象角度上,在对流层延迟参数估计时间间隔发生变化时,可降水量也会受到一定的影响,且在有实测气象数据参与解算时,其影响对天气变化比较敏感;在正常天气状况下,无气象数据参与解算对可降水量估值影响不大,基本可满足气象业务需求;在天气发生变化(降水)情况下,实测气象数据的使用与否对可降水量解算影响比较显著。 相似文献
10.
11.
12.
GAOWei XUShaoquan YUXuexiang 《地球空间信息科学学报》2003,6(4):61-65
The feasibility of monitoring the change of city settlement using GPS surveying instead of leveling is studied. A fiducial network and a monitoring network are established in Ningbo city. Two periods of GPS observation are completed. Some measures are taken during the observation in order to ensure to obtain the high-precise height component. The Saastamoinen model is adopted in the data processing of the dry component part of the tropospheric delay. The wet component change of the tropospheric delay is estimated by stochastic processes model. When Bernese software is used to process the data, the millimeter level precision of height measuring is achieved. 相似文献
13.
在GPS定位中,需要对GPD基线进行结算,如果用随机软件进行数据处理时对基线长度有着较高要求,而Bernese精密软件则适用于不同长度的基线解算.所以在文章中针对两个软件TGO和Bernese对基线处理的结果进行比较. 相似文献
14.
15.
高精度GPS城市沉降监测网的数据处理与精度分析 总被引:4,自引:1,他引:4
为了研究用GPS观测取代常规的水准测量方法来监测城市沉降变化的可行性,在宁波市建立了有7个点组成的GPS基准网和14个点组成的GPS监测网。在观测中采取了一定的措施,以获得高精度的高程分量。用Bernese软件对数据进行处理时顾及到对流层延迟的影响,采用Saastamoinen模型,获得了mm级的高程精度,这将有助于提高沉降监测的效率。 相似文献
16.
17.
On the reliability of the VCV Matrix: A case study based on GAMIT and Bernese GPS Software 总被引:1,自引:0,他引:1
Commonly, the variance-covariance (VCV) matrix derived from GPS processing software underestimates the magnitude of the error, mainly due to the fact that physical correlations are normally neglected. The GAMIT and Bernese software packages serve the scientific community as important tools for GPS measurement processing and analyzing, especially in precise applications. Therefore, the reliability of the VCV matrices derived by the GAMIT and Bernese packages is of great importance. Formal accuracies derived from both software need to be scaled by applying a scaling factor (SF) that multiplies the software-derived formal errors. However, to the best of our knowledge, no standard approach approved by the GPS community exists. In this report, an analysis is carried out in order to test the reliability and the validity of the VCV matrices in both software, and to provide SFs needed to calculate the realistic accuracies reflecting the actual error levels. The method applied in this study allows deriving SFs for formal accuracies obtained from GAMIT and Bernese. The results attained from the time series of eight days for eight baselines (lengths of 20–415 km) indicate that the overall SF for GAMIT is more than 10 times smaller than for Bernese (1.9 and 23.0, respectively). Although no distance-dependent SF was detected in either case, the session-duration dependence was detected for the Bernese software, while no clear session-duration dependence was observed for the GAMIT. Furthermore, no receiver/antenna dependence could be deduced from the results of this analysis. 相似文献