The Crater Mountain Deposit,Papua New Guinea: Porphyry‐related Au–Te System

Ore mineralization and wall rock alteration of Crater Mountain gold deposit, Papua New Guinea, were investigated using ore and host rock samples from drill holes for ore and alteration mineralogical study. The host rocks of the deposit are quartz‐feldspar porphyry, feldspar‐hornblende porphyry, andesitic volcanics and pyroclastics, and basaltic‐andesitic tuff. The main ore minerals are pyrite, sphalerite, galena, chalcopyrite and moderate amounts of tetrahedrite, tennantite, pyrrhotite, bornite and enargite. Small amounts of enargite, tetradymite, altaite, heyrovskyite, bismuthinite, bornite, idaite, cubanite, native gold, CuPbS₂, an unidentified Bi‐Te‐S mineral and argentopyrite occur as inclusions mainly in pyrite veins and grains. Native gold occurs significantly in the As‐rich pyrite veins in volcanic units, and coexists with Bi‐Te‐S mineral species and rarely with chalcopyrite and cubanite relics. Four mineralization stages were recognized based on the observations of ore textures. Stage I is characterized by quartz‐sericite‐calcite alteration with trace pyrite and chalcopyrite in the monomict diatreme breccias; Stage II is defined by the crystallization of pyrite and by weak quartz‐chlorite‐sericite‐calcite alteration; Stage III is a major ore formation episode where sulfides deposited as disseminated grains and veins that host native gold, and is divided into three sub‐stages; Stage IV is characterized by predominant carbonitization. Gold mineralization occurred in the sub‐stages 2 and 3 in Stage III. The fS₂ is considered to have decreased from ～10^?2 to 10^?14 atm with decreasing temperature of fluid.     

Geochemistry and Fluid Inclusions Analysis of Vein Quartz in the Multiple Hydrothermal Systems of Mankayan Mineral District,Philippines

Several high‐sulfidation epithermal gold orebodies in the Mankayan Mineral District were formed in an environment that has been already affected by earlier porphyry‐type mineralization. This study reports the geologic and geochemical characteristics of the Carmen and Florence epithermal orebodies, which are located in the south of the Lepanto main enargite–gold orebody. The gold‐bearing epithermal quartz veins in the Carmen and Florence areas are of two types: (i) the enargite‐rich veins and (ii) the quartz–pyrite–gold (QPG) veins. The two types of veins are mainly hosted by the Cretaceous Lepanto Metavolcanics basement rocks, with minor veins cutting the Pleistocene Imbanguila Dacite Pyroclastics. The mineral assemblages and homogenization temperatures of fluid inclusions indicate that the Carmen and Florence orebodies were deposited by fluids varying from high to very high sulfidation state. The enargite and QPG epithermal veins of Carmen and Florence cut porphyry‐type quartz veinlet stockworks and veins that host polyphase hypersaline fluid inclusions that did not homogenize at or below 400°C. These high‐temperature quartz exhibits distinctly different mineral chemistry from the quartz of the QPG and enargite‐rich epithermal veins. In particular, the Ti content of quartz of the porphyry‐type veinlet stockwork is elevated (>100 ppm), whereas the Ti concentration of the epithermal vein quartz crystals are below detection limits. The Fe concentration of quartz is high in epithermal vein quartz (>300 ppm), whereas nearly undetected in the porphyry‐type stockwork veinlet quartz. Multiple generations of quartz with different mineral chemistry, fluid inclusions morphology, temperature, salinity and bulk gas compositions, and stable isotopic ratios indicate the variable hydrothermal conditions throughout the mineralization history of the Mankayan District. The temperature, pH, sulfidation state, oxidation state, and fluid composition vary among the orebodies in Carmen and Florence areas. Furthermore, the characteristics of earlier alteration affected the apparent characteristics of subsequent mineralization.     

Telescoped porphyry Cu-Mo-Au mineralisation, advanced argillic alteration and quartz-sulphide-gold-anhydrite veins in the Thames District, New Zealand

Porphyry Cu-Mo-Au mineralisation with associated potassic and phyllic alteration, an advanced argillic alteration cap and epithermal quartz-sulphide-gold-anhydrite veins, are telescoped within a vertical interval of 400-800 m on the northeastern margin of the Thames district, New Zealand. The geological setting is Jurassic greywacke basement overlain by Late Miocene andesitic-dacitic rocks that are extensively altered to propylitic and argillic assemblages. The porphyry Cu-Mo-Au mineralisation is hosted in a dacite porphyry stock and surrounding intrusion breccia. Relicts of a core zone of potassic K-feldspar-magnetite-biotite alteration are overprinted by phyllic quartz-sericite-pyrite or intermediate argillic chlorite-sericite alteration assemblages. Some copper occurs in quartz-magnetite-chlorite-pyrite-chalcopyrite veinlets in the core zone, but the bulk of the copper and the molybdenum are associated with the phyllic alteration as disseminated chalcopyrite and as molybdenite-sericite-carbonate veinlets. The advanced argillic cap has a quartz-alunite-dickite core, which is enveloped by an extensive pyrophyllite-diaspore-dickite-kaolinite assemblage that overlaps with the upper part of the phyllic alteration zone. Later quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins occur within and around the margins of the porphyry intrusion, and are associated with widespread illite-carbonate (argillic) alteration. Multiphase fluid inclusions in quartz stockwork veins associated with the potassic alteration trapped a highly saline (50-84 wt% NaCl equiv.) magmatic fluid at high temperatures (450 to >600 °C). These hypersaline brines were probably trapped at a pressure of about 300 bar, corresponding to a depth of 1.2 km under lithostatic conditions. This shallow depth is consistent with textures of the host dacite porphyry and reconstruction of the volcanic stratigraphy. Liquid-rich fluid inclusions in the quartz stockwork veins and quartz phenocrysts trapped a lower salinity (3-20 wt% NaCl equiv.), moderate temperature (300-400 °C) fluid that may have caused the phyllic alteration. Fluid inclusions in the quartz-sphalerite-galena-pyrite-chalcopyrite-gold-anhydrite-carbonate veins trapped dilute (1-3 wt% NaCl equiv.) fluids at 250 to 320 °C, at a minimum depth of 1.0 km under hydrostatic conditions. Oxygen isotopic compositions of the fluids that deposited the quartz stockwork veins fall within the 6 to 10‰ range of magmatic waters, whereas the quartz-sulphide-gold-anhydrite veins have lower '¹⁸O_water values (-0.6 to 0.5‰), reflecting a local meteoric water (-6‰) influence. A '¹⁸O versus 'D plot shows a trend from magmatic water in the quartz stockwork veins to a near meteoric water composition in kaolinite from the advanced argillic alteration. Data points for pyrophyllite and the quartz-sulphide-gold-anhydrite veins lie about midway between the magmatic and meteoric water end-member compositions. The spatial association between porphyry Cu-Mo-Au mineralisation, advanced argillic alteration and quartz-sulphide-gold-anhydrite veins suggests that they are all genetically part of the same hydrothermal system. This is consistent with K-Ar dates of 11.6-10.7 Ma for the intrusive porphyry, for alunite in the advanced argillic alteration, and for sericite selvages from quartz-gold veins in the Thames district.     

一种酸淋滤成因的含钼石英脉——来自小秦岭北矿带大湖-秦南矿区的证据

大湖-秦南钼矿床位于小秦岭金矿田北矿带,属于东秦岭钼钨成矿带小秦岭-外方山成矿亚带。其矿床类型为含钼石英脉型,与小秦岭北矿带含金石英脉空间上伴生。根据野外地质观察、PIMA测试等结果,对大湖-秦南含钼石英脉的产出、矿石结构构造、蚀变特征进行了研究。含钼石英脉为奶白色,易碎,发育蜂窝状、团块状、角砾状构造。角砾成分为太华群片麻岩角砾、细脉状浸染状辉钼矿化的中生代花岗斑岩角砾等。蚀变有钾化、硅化、绢云母化、高岭土化以及硬石膏化等。根据野外地质特征,蚀变可分为早期钾化+硅化+绢云母化+黄铁矿化+辉钼矿化,晚期为硅化+高岭土化+硬石膏化等。含钼石英脉中的围岩角砾或多或少地发育高岭土化。辉钼矿化主要充填于石英脉的裂隙和蜂窝中。根据包裹体显微测温数据推测含钼石英脉的成矿温度为134～463℃。含钼石英脉中的δ18 O石英值为10.7‰～11.5‰,δDH2O为-96‰～-110‰;这一特征反映了既有岩浆水,也有变质水和天水的参入,高岭土δ18 O为0.1‰～2.3‰,反映了热液成因。黄铁矿δ34S值为-5.778‰～-7.841‰,以富含轻硫为特征,反映了其形成时有生物硫参入。在此基础上,通过区域地质分析,讨论了高岭土化的成因,进而认为大湖-秦南含钼石英脉很可能是与秦岭造山带在245～211Ma全面陆陆碰撞过程有关的花岗斑岩侵位形成的斑岩型钼矿体,在后期金矿形成时,在酸性热液淋滤下进一步富集。     

Geological setting and timing of the Chah Zard breccia-hosted epithermal gold–silver deposit in the Tethyan belt of Iran

The breccia-hosted epithermal gold–silver deposit of Chah Zard is located within a high-K, calc-alkaline andesitic to rhyolitic volcanic complex in the central part of the Urumieh-Dokhtar Magmatic Arc (UDMA), west central Iran. The total measured resource for Chah Zard is ∼2.5 million tonnes of ore at 12.7 g/t Ag and 1.7 g/t Au (28.6 t Ag, 3.8 t Au), making it one of the largest epithermal gold deposits in Iran. Magmatic and hydrothermal activity was associated with local extensional tectonics in a strike-slip regime formed in transtensional structures of the Dehshir-Baft strike-slip fault system. The host rocks of the volcanic complex consist of Eocene sedimentary and volcanic rocks covered by Miocene sedimentary rocks. LA-ICP–MS U–Pb zircon geochronology yields a mean age of 6.2 ± 0.2 Ma for magmatic activity at Chah Zard. This age represents the maximum age of mineralization and may indicate a previously unrecognized mineralization event in the UDMA. Breccias and veins formed during and after the waning stages of explosive brecciation events due to shallow emplacement of rhyolite porphyry. Detailed systematic mapping leads to the recognition of three distinct breccia bodies: volcaniclastic breccia with a dominantly clastic matrix; gray polymict breccia with a greater proportion of hydrothermal cement; and mixed monomict to polymict breccia with clay matrix. The polymictic breccias generated bulk-mineable ore, whereas the volcaniclastic breccia is relatively impermeable and largely barren. Precious metals occur with sulfide and sulfosalt minerals as disseminations, as well as in the veins and breccia cements. There is a progression from pyrite-dominated (stage 1) to pyrite-base metal sulfide and sulfosalt-dominated (stages 2 and 3) to base metal sulfide-dominated (stage 4) breccias and veins. Hydrothermal alteration and deposition of gangue minerals progressed from illite-quartz to quartz-adularia, carbonate, and finally gypsum-dominated assemblages. Free gold occurs in stages 2 and 4, principally intergrown with pyrite, quartz, chalcopyrite, galena, sphalerite, and Ag-rich tennantite–tetrahedrite, and also as inclusions in pyrite. High Rb/Sr ratios in ore-grade zones are closely related to sericite and adularia alteration. Positive correlations of Au and Ag with Cu, As, Pb, Zn, Sb, and Cd in epithermal veins and breccias suggest that all these elements are related to the same mineralization event.     

The La Unión Au ± Cu prospect,Camagüey District,Cuba: fluid inclusion and stable isotope evidence for ore-forming processes

The Camagüey district, Cuba, is known for its epithermal precious metal deposits in a Cretaceous volcanic arc setting. Recently, the La Unión prospect was discovered in the southern part of the district, containing gold and minor copper mineralization interpreted as porphyry type. Mineralization is hosted in a 73.0 ± 1.5 Ma calc–alkaline I-type oxidized porphyry quartz diorite intrusive within volcanic and volcaniclastic rocks of the early Cretaceous Guáimaro Formation. The porphyry is affected by propylitic alteration and crosscut by a network of quartz and carbonate veinlets and veins. Chlorite, epidote, sericite, quartz, and pyrite are the main minerals in the early veins which are cut by late carbonate and zeolite veins. Late barite pseudomorphously replaces pyrite. Gold is associated with pyrite as disseminations in the altered quartz diorite and in the veins, occurring as inclusions or filling fractures in pyrite with 4 g/t Au in bulk samples, and up to 900 ppm Au in in pyrite. Fluid inclusion and oxygen isotope data are consistent with a H₂O–NaCl–(KCl) mineralizing fluid, derived from the quartz diorite magma, and trapped at least at 425°C and 1.2 kbar. This primary fluid unmixed into two fluid phases, a hypersaline aqueous fluid and a low-salinity vapor-rich fluid. Boiling during cooling may have played an important role in metal precipitation. Pyrite δ³⁴S values for the La Unión prospect range between 0.71‰ and 1.31‰, consistent with a homogeneous magmatic sulfur source. The fluids in equilibrium with the mineralized rocks have estimated δ¹⁸O values from 8‰ to 11.8‰, calculated for a temperature range of 480–505°C. The tectonic environment of the La Unión prospect, its high gold and low copper contents, the physical–chemical characteristics of the mineralizing fluids and the isotopic signature of the alteration minerals and fluids indicate that the La Unión gold mineralization is similar to the porphyry gold type, even though the ore-related epidote–chlorite alteration can be classified as propylitic and not the classic potassic and/or phyllic alteration. The low copper contents in the prospect could be due to a mineralizing fluid previously saturated in copper, which is indicated by trapped chalcopyrite crystals in high-temperature fluid inclusions. The low-temperature paragenesis, represented by carbonate, zeolite and barite, indicates epithermal overprint. The study shows the potential for other gold porphyry-type deposits in the Cretaceous volcanoplutonic arc of Cuba.     

黑龙江多宝山矿田争光金矿床类型、U-Pb年代学及古火山机构

争光金矿床(伴生锌)位于我国东北地区黑龙江省多宝山Cu-Au-Mo成矿带南东端,构造上处于古亚洲成矿构造域和滨太平洋成矿构造域的叠加部位。该金矿距北西向的多宝山铜金矿和铜山铜矿分别约为10km和5km,因此,深入研究其成矿时代、成因类型归属,理清与多宝山铜金矿-铜山铜矿的关系具有重要科学价值。争光金矿赋矿围岩为奥陶系多宝山组安山质火山岩地层,发育爆发相、溢流相、火山碎屑流相、火山沉积相等,且爆发相和喷溢相交替出现,具有喷发时期熔岩溢流与火山碎屑物的喷发交替进行或具多旋回火山活动的特征;根据火山集块岩、火山角砾岩、火山碎屑岩的空间展布及岩相变化特征,推测矿区内发育有古火山机构。受后期北西向构造影响,火山岩地层具北西向弱定向变形特征。含金脉系呈脉状、网脉状沿北西向、北东向及南北向构造产出;矿石矿物以黄铁矿、闪锌矿、黄铜矿、方铅矿为主,金以裂隙金、粒间金和包裹金的形式赋存于上述硫化物中,部分赋存在石英中。综合脉系特征、矿物组合、蚀变类型、闪锌矿Fe含量等,本文明确提出该矿床为中硫型浅成低温热液型金矿。对矿区内发育的成矿后闪长玢岩、花岗闪长斑岩及长石斑岩等脉岩的锆石U-Pb测年结果初步厘定争光金矿金成矿作用早于454Ma。综合判断争光金矿与多宝山含金斑岩铜矿、铜山铜矿同形成于480~454Ma受古亚洲洋俯冲作用控制的岛弧背景,构成完整的斑岩Cu-Au与中硫化型浅成低温热液Au成矿系统。     

Geology and geochronology of Naruo large porphyry-breccia Cu deposit in the Duolong district,Tibet

The Duolong district is located in the south Qiangtang terrane of Tibet and is the most significant ore cluster within the Bangongco-Nujiang metallogenic belt. Duolong contains one giant, three large and two medium to small-sized porphyry (±epithermal ± breccia) copper deposits and several other mineralized porphyry bodies. All deposits are closely associated with early Cretaceous (123–115 Ma) intermediate-felsic intrusions. Naruo is a poorly studied porphyry-breccia copper deposit in the north of the Duolong district. Hydrothermal alteration surrounding the ore-bearing granodiorite at Naruo is characterized by an inner potassic zone and an outer propylitic zone, overlapped locally by minor phyllic and argillic alteration assemblages. A detailed paragenetic study has identified five distinct hydrothermal veins (M, A, B, C, D) within the porphyry system. Hydrothermal B veins are strongly related to copper mineralization. Strong propylitic alteration is also observed throughout the hydrothermal breccias identified at Naruo. Sandstone breccia, diorite-bearing breccia and granodiorite-bearing breccia were identified according to the distribution and composition of clasts. U-Pb zircon dating has determined the ages of the ore-bearing granodiorite (121.6 ± 1.3 Ma) and a barren intrusion (115.5 ± 1.1 Ma) within the porphyry system, diorite clasts (122.3 ± 0.9 Ma) and later diorite matrix (120.5 ± 1.0 Ma) in the hydrothermal breccia system, suggesting that with the exception of the late barren intrusion, they all belong to the same mineralizing event at Duolong. The geological and geochemical evidence presented in this study suggest that the porphyry and breccia systems may have originated from the same magma source, but are now spatially independent.     

巴布亚新几内亚利希尔岛拉多拉姆(Ladolam)金矿矿床地质特征及找矿标志

巴布亚新几内亚利希尔岛拉多拉姆金矿处于太平洋板块与印澳板块的板块边界部位,为西南太平洋地区最大的碱性侵入岩有关的低硫型浅成低温热液型金矿。矿床赋存在Luise火山内,成矿与更新世碱性二长闪长岩侵入体有关,该岩体形成于俯冲带环境下被流体交代的上地幔的部分熔融。矿床的矿化可分为三个阶段,在岩体侵入后形成斑岩铜矿化,并在之后逐渐过渡为浅成低温热液型金矿化。该类矿床在成矿过程和矿体的分布明显受到区域性构造、蚀变带和成矿有关角砾岩等成矿结构面的控制,在找矿标志上具有特定的物化探和地质特征,具有较好的找矿远景。     

The Nassara gold prospect,Gaoua District,southwestern Burkina Faso

The Nassara-Au prospect is located in the Birimian Boromo Greenstone Belt in southwestern Burkina Faso. It is part of a larger mineralized field that includes the Cu–Au porphyry system of Gaoua, to the north. At Nassara, mineralization occurs within the West Batié Shear Zone that follows the contact between volcanic rocks (basalt and andesite) and volcano-sediments (pyroclastics and black shales) at the southern termination of the Boromo Belt. Gold is associated with pyrite and other Fe-bearing minerals that occur disseminated within the sheared volcanic and volcano-sedimentary rocks. In particular, highest grades are distinguished in alteration halos of small quartz–albite–ankerite veins that form networks along the shear zone. Here, pyrites are marked by As-poor and As-rich growth zones, the latter containing gold inclusions. Gold mineralization formed during D2_NA. Subsequent shear fractures related to D3_NA related are devoid of gold. Nassara is a classical orogenic gold occurrence where gold is associated to disseminated pyrite along quartz veins.     

Discovery and exploration of the Gosowong epithermal gold deposit, Halmahera, Indonesia

The Gosowong epithermal gold deposit, on the island of Halmahera in eastern Indonesia, is located in an area of primary tropical rain forest with no previous history of gold mining or record of gold mineralisation. The deposit occurs in a newly recognised mineral district which contains a number of epithermal vein systems and at least two centres of low-grade porphyry style Cu–Au mineralisation. Several zones of argillic and advanced argillic alteration have been noted which may be related to additional centres of mineralisation. Gosowong is classified as a low-sulphidation epithermal quartz vein. Bonanza-grade gold–silver mineralisation is developed in shoots over a 400-m strike section of the vein system. Three types of veining are recognized; quartz–adularia veins and breccias; quartz–chlorite–illite veins and breccias; and crystalline or chalcedonic quartz vein stockworks. The area was targetted using a simple geological concept and the deposit was discovered and tested using basic exploration techniques commonly applied in the rugged tropical terrains of Indonesia. Sequential exploration methods comprised reconnaissance drainage sampling of stream sediment, BLEG and float media, ridge and spur soil sampling, prospect scale grid soil sampling, hand trenching and diamond drilling. Lapse time from identification of the initial reconnaissance anomaly to an inferred resource estimate of almost 1 million ounces of gold was less than 3.5 years. This case history illustrates that very detailed exploration is necessary to locate high-grade vein-type gold deposits in a tropical environment, but demonstrates that such resources still remain to be discovered in the relatively under-explored Neogene magmatic arcs of Indonesia.     

The BanskáŠtiavnica ore district: relationship between metallogenetic processes and the geological evolution of a stratovolcano

The Banská?tiavnica ore district is in the central zone of the largest stratovolcano in the Central Slovakia Neogene Volcanic Field, which is situated at the inner side of the Carpathian arc over the Hercynian basement with the Late Paleozoic and Mesozoic sedimentary cover. Volcanic rocks of the High-K orogenic suite are of the Badenian through Pannonian age (16.5–8.5?Ma). Their petrogenesis is closely related to subduction of flysch belt oceanic basement underneath the advancing Carpathian arc and to back-arc extension processes. The stratovolcano includes a large caldera 20?km in diameter and a late-stage resurgent horst in its centre, exposing a basement and extensive subvolcanic intrusive complex. The following stages have been recognized in the evolution of the stratovolcano: (1)?formation of a large pyroxene/hornblende-pyroxene andesite stratovolcano; (2)?denudation, emplacement of a diorite intrusion; (3) emplacement of a large granodiorite bell-jar pluton within the basement; (4) emplacement of granodiorite/quartz-diorite porphyry stocks and dyke clusters around the pluton; (5) caldera subsidence and its filling by biotite-hornblende andesite volcanics, emplacement of quartz-diorite porphyry sills and dykes at the subvolcanic level; (6)?renewed activity of andesites from dispersed centres on slopes of the volcano; (7) uplift of a resurgent horst accompanied by rhyolite volcanics and granite porphyry dykes. The following types of ore deposits (mineralizations) have been identified in the Banská?tiavnica ore district: 1. Quartz-pyrophyllite-pyrite high-sulphidation system at ?obov, related to the diorite intrusion. 2. Magnetite skarn deposits and occurrences?at contacts of the granodiorite pluton with Mesozoic carbonate rocks. Magnetite ores occur as lenses in the calcic skarns. 3.?Stockwork/disseminated base metal deposit along an irregular network of fractures in apical parts of the granodiorite pluton and in remnants of basement rocks. Mineral paragenesis is simple, with leading sphalerite and galena and minor chalcopyrite and pyrite. In overlying andesites the mineralization is accompanied by metasomatic quartzites and argillites with pyrophyllite, kaolinite, illite and pyrite. 4. Porphyry/skarn copper deposits and occurrences related to granodiorite/quartz-diorite porphyry dyke clusters and stocks around the granodiorite intrusion. The mineralized zone is represented by accumulations of chalcopyrite in exo- and endo-skarns, usually of the magnesian type affected by serpentinization. Besides chalcopyrite, pyrhotite, minor bornite, chalcosite, tennantite and magnetite, rare molybdenite and gold are present. The alteration pattern around productive intrusions includes an external zone of propylitization, a zone of argillitic alteration (kaolinite – illite – pyrite) and an internal zone of phyllic alteration (quartz – sericite – pyrite). Biotitization is rare and limited to porphyry intrusions. 5. Intrusion related “mesothermal” gold deposit in an andesitic environment just above the granodiorite intrusion. Gold of high fineness with base metal mineralization is contained in brecciated and/or banded quartz veins of subhorizontal orientation, parallel to the surface of granodiorite pluton. At least the first phase of mineralization is older than quartz-diorite porphyry sills, which separate granodiorite and blocks of mineralized andesite. 6. Hot spring type advanced argillic systems in the caldera filling. Silicites and opalites accompanied by kaolinite, alunite and pyrite grade downward into smectite dominated argillites. 7. Vein type epithermal precious/base metal deposits and occurrences as a result of the long lasting interaction among structural evolution of the resurgent horst and evolving hydrothermal system, extensive intrusive complex and deep seated siliceous magma chamber serving as heat and magmatic fluid source. Three types of epithermal veins occur in a zonal arrangement: (a) base metal veins ± Au with transition to Cu?±?Bi mineralization at depth in the east/central part of the horst, (b)?Ag – Au veins with minor base metal mineralization and (c) Au – Ag veins located at marginal faults of the horst. Isotopic composition of oxygen and hydrogen in hydrothermal fluids indicate mixing of magmatic and meteoric component (with generally increasing proportion of meteoric component towards younger mineralization periods?). Veins are accompanied by zones of silicification, adularization and sericitization, indicating a low sulphidation environment. 8.?Replacement base metal mineralization of a limited extent in the Mesozoic carbonate rocks next to sulphide rich epithermal base metal veins.     

Role of fluid mixing and wallrock sulfidation in gold mineralization at the Semna mine area,central Eastern Desert of Egypt: Evidence from hydrothermal alteration,fluid inclusions and stable isotope data

The Semna gold deposit is one of several vein-type gold occurrences in the central Eastern Desert of Egypt, where gold-bearing quartz veins are confined to shear zones close to the boundaries of small granitoid stocks. The Semna gold deposit is related to a series of sub-parallel quartz veins along steeply dipping WNW-trending shear zones, which cut through tectonized metagabbro and granodiorite rocks. The orebodies exhibit a complex structure of massive and brecciated quartz consistent with a change of the paleostress field from tensional to simple shear regimes along the pre-existing fault segments. Textural, structural and mineralogical evidence, including open space structures, quartz stockwork and alteration assemblages, constrain on vein development during an active fault system. The ore mineral assemblage includes pyrite, chalcopyrite, subordinate arsenopyrite, galena, sphalerite and gold. Hydrothermal chlorite, carbonate, pyrite, chalcopyrite and kaolinite are dominant in the altered metaggabro; whereas, quartz, sericite, pyrite, kaolinite and alunite characterize the granodiorite rocks in the alteration zones. Mixtures of alunite, vuggy silica and disseminated sulfides occupy the interstitial open spaces, common at fracture intersections. Partial recrystallization has rendered the brecciation and open space textures suggesting that the auriferous quartz veins were formed at moderately shallow depths in the transition zone between mesothermal and epithermal veins.Petrographic and microthermometric studies aided recognition of CO₂-rich, H₂O-rich and mixed H₂O–CO₂ fluid inclusions in the gold-bearing quartz veins. The H₂O–CO₂ inclusions are dominant over the other two types and are characterized by variable vapor: liquid ratios. These inclusions are interpreted as products of partial mixing of two immiscible carbonic and aqueous fluids. The generally light δ³⁴S of pyrite and chalcopyrite may suggest a magmatic source of sulfur. Spread in the final homogenization temperatures and bulk inclusion densities are likely due to trapping under pressure fluctuation through repeated fracture opening and sealing. Conditions of gold deposition are estimated on basis of the fluid inclusions and sulfur isotope data as 226–267 °C and 350–1100 bar, under conditions transitional between mesothermal and epithermal systems.The Semna gold deposit can be attributed to interplay of protracted volcanic activity (Dokhan Volcanics?), fluid mixing, wallrock sulfidation and a structural setting favoring gold deposition. Gold was transported as Au-bisulfide complexes under weak acid conditions concomitant with quartz–sericite–pyrite alteration, and precipitated through a decrease in gold solubility due to fluid cooling, mixing with meteoric waters and variations in pH and fO₂.     

Low potassium hydrothermal alteration in low sulfidation epithermal systems as detected by IRS and XRD: An example from the Co–O mine,Eastern Mindanao,Philippines

Detailed hydrothermal alteration investigations, including petrography, infrared reflectance spectroscopy (IRS) and XRD of the low sulfidation epithermal Co–O mine, located in Eastern Mindanao (Philippines) revealed that both distal and intermediate hydrothermal alteration zones contain dominantly illite and chlorite, whereas the proximal alteration zone comprises mainly illite, chalcopyrite and pyrite. The gold-bearing veins and the proximal hydrothermal alteration zone display a distinct absence of K-rich hydrothermal alteration minerals such as K-feldspar (adularia).Gold mineralization in the Co–O mine is controlled by an extensive quartz-breccia vein system, which is characterized by three distinct stages of vein (incl. breccias) formation. Gold is mainly observed in stages 2 and 3 veins. Stage 1 veins appear as fragments in stage 2 veins and display boiling textures such as quartz pseudomophs after bladed calcite. These veins further display colloform to crustiform banding and contain pyrite, chalcopyrite and minor gold located in the colloform bands and between bladed quartz pseudomorphs. Stage 2 veins comprise mostly banded to massive quartz and contains sulfides parallel to bands or disseminated. These veins are fine-grained with mosaic/jigsaw quartz and contain calcite blebs and/or fragments of stage 1 veins. Gold is in textural equilibrium with chalcopyrite, sphalerite, and locally pyrite. Stage 3 veins consist of quartz and carbonate (locally Mn-rich), and display irregular banded and comb textures. In auriferous veins of this stage gold is in textural equilibrium with chalcopyrite and pyrite (with local abundance of sphalerite). Other sulfide minerals observed with gold in stages 2 and 3 are galena, acanthite and locally jalpaite.The XRD and IRS provide inconsistent results regarding the abundance of K-rich clays (e.g., illite) associated with auriferous veins. Illite, with possibly interlayered swelling clays, such as Al-smectite, was identified in auriferous vein stages 2 and 3 using IRS, but could not be confirmed by XRD. Comparative analysis of the results of these techniques with respect to the ordering of micaceous minerals, suggest less ordered white mica proximal to the veins.Vein textures such as banded quartz, the absence of K-feldspar and the abundance of illite (interlayered Al-smectite) suggest relatively low temperatures of formation of the hydrothermal alteration system and point to a potential boiling horizon located deeper or marginal to the currently exploited levels of the Co–O mine. The absence of K-feldspar may also be related to relatively low temperatures of the hydrothermal fluid, the medium potassium-rich magma series of the host rocks, and/or a relatively low oxidation state of the hydrothermal fluid.     

Role of fluid mixing and wallrock sulfidation in gold mineralization at the Semna mine area, central Eastern Desert of Egypt: Evidence from hydrothermal alteration, fluid inclusions and stable isotope data

The Semna gold deposit is one of several vein-type gold occurrences in the central Eastern Desert of Egypt, where gold-bearing quartz veins are confined to shear zones close to the boundaries of small granitoid stocks. The Semna gold deposit is related to a series of sub-parallel quartz veins along steeply dipping WNW-trending shear zones, which cut through tectonized metagabbro and granodiorite rocks. The orebodies exhibit a complex structure of massive and brecciated quartz consistent with a change of the paleostress field from tensional to simple shear regimes along the pre-existing fault segments. Textural, structural and mineralogical evidence, including open space structures, quartz stockwork and alteration assemblages, constrain on vein development during an active fault system. The ore mineral assemblage includes pyrite, chalcopyrite, subordinate arsenopyrite, galena, sphalerite and gold. Hydrothermal chlorite, carbonate, pyrite, chalcopyrite and kaolinite are dominant in the altered metaggabro; whereas, quartz, sericite, pyrite, kaolinite and alunite characterize the granodiorite rocks in the alteration zones. Mixtures of alunite, vuggy silica and disseminated sulfides occupy the interstitial open spaces, common at fracture intersections. Partial recrystallization has rendered the brecciation and open space textures suggesting that the auriferous quartz veins were formed at moderately shallow depths in the transition zone between mesothermal and epithermal veins.Petrographic and microthermometric studies aided recognition of CO₂-rich, H₂O-rich and mixed H₂O–CO₂ fluid inclusions in the gold-bearing quartz veins. The H₂O–CO₂ inclusions are dominant over the other two types and are characterized by variable vapor: liquid ratios. These inclusions are interpreted as products of partial mixing of two immiscible carbonic and aqueous fluids. The generally light δ³⁴S of pyrite and chalcopyrite may suggest a magmatic source of sulfur. Spread in the final homogenization temperatures and bulk inclusion densities are likely due to trapping under pressure fluctuation through repeated fracture opening and sealing. Conditions of gold deposition are estimated on basis of the fluid inclusions and sulfur isotope data as 226–267 °C and 350–1100 bar, under conditions transitional between mesothermal and epithermal systems.The Semna gold deposit can be attributed to interplay of protracted volcanic activity (Dokhan Volcanics?), fluid mixing, wallrock sulfidation and a structural setting favoring gold deposition. Gold was transported as Au-bisulfide complexes under weak acid conditions concomitant with quartz–sericite–pyrite alteration, and precipitated through a decrease in gold solubility due to fluid cooling, mixing with meteoric waters and variations in pH and fO₂.     

闽中太华山金矿区金坂矿段矿化类型及找矿方向探讨

太华山金矿区位于福建中部尤溪-德化-永泰三县的结合部位之"闽中金矿集中区",是该区具有找矿前景的靶区之一。随着太华山金矿区金坂矿段深部找矿勘查较系统的工程投入,发现了该区段深部的含矿斑岩体及其矿化蚀变系统。通过对金坂矿段620 m中段以上的含矿斑岩、矿化类型、蚀变分带特征及斑岩与各类型矿化的关系等进行系统分析,初步认为太华山金坂矿段矿化类型具有浅成低温热液型金银矿的特征,其金银矿(化)体在空间上与流纹斑岩紧密相伴,主要产于流纹斑岩体的内外接触带中,自上而下的矿化类型分为:顶部(微)细粒浸染型、中部石英细脉/网脉型及深部热液角砾/黄铁矿浸染石英脉型等,成矿具有"一体多型"的特点。结合太华山矿区太华山矿段、尤岭隔矿段地质特征的对比分析,提出了该区深部金银矿找矿地质模型,对完善太华山热泉-次火山斑岩成矿系统模型及其指导深部探矿工作具有重要的意义。     

P–T composition and evolution of paleofluids in the Paleoproterozoic Mag Hill IOCG system,Contact Lake belt,Northwest Territories,Canada

The Echo Bay stratovolcano complex and Contact Lake Belt of the Great Bear Magmatic Zone, Northwest Territories, host a series of coalescing Paleoproterozoic hydrothermal systems that affected an area of several hundred square kilometers. They were caused by intrusion of synvolcanic diorite–monzodioritic plutons into andesitic host rocks, producing several characteristic hydrothermal assemblages. They include early and proximal albite, magnetite–actinolite–apatite, and potassic (K-feldspar) alteration, followed by more distal hematite, phyllic (quartz–sericite–pyrite), and propylitic (chlorite–epidote–carbonate±sericite±albite±quartz) alteration, and finally by late-stage polymetallic epithermal veins. These alteration types are characteristic of iron oxide copper–gold deposits, however, with distal and lower-temperature assemblages similar to porphyry Cu systems. Magnetite–actinolite–apatite alteration formed from high temperature (up to 560 °C) fluids with average salinity of 12.8 wt% NaCl equivalent. The prograde propylitic and phyllic alteration stages are associated with fluids with temperatures varying from 80 to 430 °C and a wide salinity range (0.5–45.6 wt% NaCl equivalent). Similarly, wide fluid temperature (104–450 °C) and salinity (4.2–46.1 wt% NaCl equivalent) ranges are recorded for the phyllic alteration. This was followed by Cu–Ag–U–Zn–Co–Pb sulfarsenide mineralization in late-stage epithermal veins formed at shallow depths and temperatures from 270 °C to as low as 105 °C. The polymetallic veins precipitated from high salinity (mean 30 wt% NaCl equivalent) dense fluids (1.14 g/cm³) with a vapor pressure of 3.8 bars, typical of epithermal conditions. Fluid inclusion evidence indicates that mixed fluids with evolving physicochemical properties were responsible for the formation of the alteration assemblages and mineralization at Mag Hill. An early high temperature, moderate salinity, and magmatic fluid was subsequently modified variably by boiling, mixing with cooler low-salinity meteoric water, and simple cooling. The evidence is consistent with emplacement of the source plutons and stocks into an epithermal environment within ~1 km of surface. This generated near-surface high-temperature alteration in a dynamic hydrothermal system that collapsed (telescoped) resulting in widespread evidence of boiling and epithermal mineralization superimposed on earlier stages of alteration.     

Endeavour 42 deposit,Lake Cowal,New South Wales: A structurally controlled gold deposit

Endeavour 42 is a structurally controlled Au deposit with similarities to adularia‐sericite deposits. It is the largest of four gold prospects discovered in the Late Ordovician Lake Cowal volcanic complex, adjacent to the Gilmore Fault Zone, in central New South Wales, Australia. The Lake Cowal volcanic complex consists of calc‐alkaline to shoshonitic volcanic rocks and related sedimentary rocks that were deposited in a relatively deep‐water environment. The volcanic and sedimentary rocks of the Lake Cowal volcanic complex were intruded by diorite and granodiorite. Low‐grade porphyry Cu (0.2–0.35% Cu) mineralisation is developed in parts of the granodiorite intrusion. The gold deposits are developed north of the porphyry Cu mineralisation and occur within a north‐south corridor adjacent to a north‐south‐oriented body of diorite. The Endeavour 42 deposit is hosted by three volcanic units and a diorite. The stratigraphic units at Endeavour 42, consistently strike 215° and dip 50°NW, and comprise an upper unit dominated by redeposited pyroclastic debris and a lower conglomerate unit with clasts of reworked volcanic rocks. Separating these units is a sequence of trachyandesite lava and hyaloclastite breccias. Laminated mudstone and siltstone throughout the sequence are indicative of a relatively deep‐water, below wave‐base, environment. Porphyritic dykes, which are typically associated with zones of faulting, cross‐cut both the volcano‐sedimentary sequence and the diorite. The major fault orientations are 290° and 340°, forming subparallel conjugate fault sets. Both sets of faults are mineralised, contain deformed porphyritic dykes and are associated with sericitic alteration. Endeavour 42 is a sulfide‐poor gold deposit with free native Au and Au associated with pyrite and sphalerite. Minor galena, pyrrhotite and chalcopyrite are also observed. Irregular pyrite veinlets and carbonate‐sulfide veinlets occur in the upper unit of re‐deposited pyroclastic debris. Auriferous veins are parallel‐sided dilatant veins with quartz‐sulfide‐carbonate‐adularia. These veins display a consistent strike of 305° and a dip of 35°SW. Alteration and mineralisation were influenced by host‐rock composition and rheology. A pervasive alteration assemblage of chlorite‐carbonate‐hematite‐epidote is developed throughout the Lake Cowal volcanic complex. This is overprinted by sericite‐silica‐carbonate alteration around fault zones and dykes, with patchy and pervasive alteration of this type developed in the lava sequence and upper volcani‐clastic unit, reflecting permeability and probable alteration zoning. In the lower clastic unit, the diorite and, in parts of the lava sequence, a chlorite‐carbonate‐pyrite assemblage partially overprints sericite‐silica alteration, suggesting an evolving fluid composition, changing physico‐chemical conditions or a different alteration fluid. Age dating of the intrusive phases and sericitic alteration associated with mineralisation at Endeavour 42 yields ages of 465.76 ± 1 and 438.6 ± 0.5 Ma, respectively, suggesting that mineralisation post‐dates the Lake Cowal intrusive event and is related to intrusion of magma during the 440 Ma mineralising event, an important period in the eastern Lachlan Fold Belt.     

藏东芒康县巴达铜金矿床地质特征及找矿方向研究

巴达铜金矿位于藏东富碱斑岩带南段,是藏东地区近年来新发现的大型铜金矿。虽然对巴达铜金矿开展了大量勘查工作,但对该矿床的成因尚未取得共识。本文基于详细的野外调研、岩心与坑道编录及系统的镜下鉴定,对巴达铜金矿床地质特征进行研究。巴达矿床主要产于石英二长斑岩中,局部产于斑岩和砂岩地层的接触带内。矿床发育的围岩蚀变主要为青磐岩化、钾化、绢英岩化,高岭土化、蛋白石化、蒙脱石化次之,蚀变分带从内向外依次为钾硅酸盐化带、绢英岩化带、青磐岩化带、高岭土化带,铜金矿体主要赋存于钾硅酸盐化和绢英岩化带内,铜矿化主要以黄铜矿形式产出,金矿化主要以银金矿形式产于白云石±石英+细粒黄铁矿±黄铜矿脉中,铜矿化与金矿化呈正相关,矿体的产出受北西向逆冲断层的控制。与典型斑岩和浅成低温热液矿床不同,巴达铜金矿化主要产于白云石±石英+黄铁矿脉中;矿床内既发育碳酸盐、伊利石、绢云母和黄铁矿、黄铜矿、方铅矿、黝铜矿、低FeS闪锌矿等一套中硫型浅成低温热液矿床的蚀变矿物组合,又发育符合碱性斑岩系统的特征矿物赤铁矿。基于以上特征判断,巴达铜金矿矿床成因类型应为与富碱斑岩有关的浅成低温热液矿床,巴达铜金矿矿床成因的厘定,为下一步找矿提供了理论指导。     

Recognition of Yanshanian magmatic-hydrothermal gold and polymetallic gold mineralization in the Laowan gold metallogenic belt,Tongbai Mountains: New evidence from structural controls,geochronology and geochemistry

The Laowan metallogenic belt in China is an important metallogenic belt within the Tongbai orogenic belt, and contains the medium-sized Laowan and Shangshanghe gold deposits, the small Huangzhuyuan lead–zinc–silver–gold deposit and some gold and Cu–Pb occurrences. These deposits are hosted in Mesoproterozoic plagioclase amphibolite (or schist) and mica-quartz schist. The gold ores are mainly quartz veins and veinlets and disseminated altered ores. Subordinate ore types include massive sulfides and breccias. The Laowan gold deposit is characterized by three right-stepping en-echelon fracture-controlled alteration zones that dip gently to the south and includes disseminated, sheeted and stockwork ores. These lodes were formed by the interaction of ore-forming fluid with foliated-to laminated cataclasite within the transpressional faults. The Shangshanghe gold deposit is characterized by parallel ore lodes that dip steeply to the north, and includes quartz veins and breccias in addition to ores in altered wallrocks. These lodes were formed by focusing of fluids into transtensional faults. These ore controlling faults displaced early barren quartz veins 10 m horizontally with a dextral sense of motion. The ore-hosting structures at the Laowan and Shangshanghe deposits correspond to the P and R-type shears of a brittle dextral strike-slip fault system, respectively, which make angles of about 15° and − 15° to the Laowan and Songpa boundary faults. The ore-controlling fault system post-dated formation of a ductile shear zone, and peak regional metamorphism. This precludes a genetic relationship between hydrothermal mineralization and regional metamorphism and ductile shear deformation. These gold deposits are not typical orogenic gold deposits. The metallogenic belt displays district-scale-zoning of Mo → Cu–Pb–Zn–Ag → Au relative to Songpa granite porphyry dike zone, suggesting the mineralization may be closely related to the granite porphyry. Measured δ³⁴S of sulfides and δ¹⁸O and δD of fluid inclusion waters in auriferous quartz also are consistent with a magmatic source for sulfur and ore fluids. The similarity of Pb isotope ratios between the ores and Yanshanian granitoids suggests a similar source. As the age (139 ± 3 Ma) of granite porphyry obtained by zircon U–Pb isotope overlaps the mineralization age (138 ± 1 Ma: Zhang et al., 2008a), the gold and polymetallic metallogenesis of the Laowan gold belt has close spatial, temporal and possibly genetic relationships with Yanshanian high level magmatism.