南迦巴瓦构造结周边地区主要断裂现今运动特征

本文基于南迦巴瓦构造结周边16个宽频带地震台的观测波形数据,对地震事件进行相关分析,使用MSDP软件进行多台定位,编制了研究区内的地震目录,并利用CAP方法获得了研究区内主要断裂带两侧10km范围内M 3.0以上地震的震源机制解,用于分析主要断裂带的现今运动特征。研究结果表明:研究区内的地震活动受主要断裂带的控制;墨脱断裂带现今运动主要为左旋逆冲运动;米林断裂带以左旋正断运动为主;嘉黎断裂带以右旋逆冲为主,兼有左旋和正断运动;阿帕龙断裂带以右旋逆冲运动为主;边坝-达木新生断裂带运动以右旋逆冲运动为主,兼有正断和左旋运动;各主要断裂带的现今运动特征与地质和GPS观测结果相同,表明南迦巴瓦构造结周边地区主要断裂带的现今运动主要受阿萨姆构造结俯冲作用的控制。     

Tectonics and Seismicity of the Yarlung Tsangpo Grand Canyon Region

The Yarlung Tsangpo Grand Canyon region is located in the frontal zone of the eastern Himalayan syntaxis, where neo-tectonics and seismicity are intensive and closely related to each other. In the region, two sets of fault structures have developed, striking NNE-NE and NWW-NW, respectively. Investigation shows that they differ markedly in terms of scope, property, active times and intensity. The NWW-NW trending faults are large in size, and most are thrust and thrust strike-slip faults, formed in earlier times. The NEE-NE-strike faults are relatively small in size individually, with concentrated distribution, constituting the NNE-trending shear extensional fault zone, which is relatively younger with evident late Quaternary activities. Strong earthquakes occur mainly in the areas or zones of intensive differential movement of the Himalayas, e.g. along the deep and large fault zones around the crustal blocks. Most earthquakes of M≥7.0 are closely related to tectonics, where large-scale Holocene active faults are distributed with complicated fault geometry, or the faults of multiple directions intersect. Among them, earthquakes of M≥7.5 have occurred on the NW and NE-trending faults with a greater strike-slip component in the fault tectonic zones.     

CHANGES IN FAULT MOVEMENT PROPERTY AND GENETIC MECHANISM ON THE WESTERN SEGMENT OF THE XIANGSHAN-TIANJINGSHAN FAULT ZONE

The Xiangshan-Tianjingshan fault zone is an important part of the arc tectonic zone in northeastern Tibet, whose eastern segment is characterized by primarily left-lateral slip along with thrust component. In contrast, the fault movement property on the western segment of the Xiangshan-Tianjingshan fault zone is more complicated. According to the offset geomorphic features and cross sections revealed by the trenches and outcrops, the western segment is mainly a left-lateral strike-slip fault with normal component, and only accompanied with reverse component at specific positions. To determine the genetic mechanism of fault movement property on the western segment, we obtained three main factors based on the integrated analysis of fault geometry:(1)Step-overs:the left-stepping parallel faults in a sinistral shear zone create extensional step-overs and control the nearby and internal fault movement property; (2)terminal structures:they are conductive to stop rupture propagation and produce compressive deformation at the end of the fault trace; and(3)double bends:strike-slip faults have trace that bends such that slip between two adjacent blocks creates a compressive stress and thrust fault. Additionally, the Tianjingshan sub-block moves to SEE and creates an extensional stress at the end of the sub-block associated with normal faults. It shows that the Xiangshan-Tianjingshan fault zone has a complex evolution history, which is divided into two distinctive periods and characterized by laterally westward propagating.     

拉分盆地形成机制三维数值模拟——以海原断裂带老龙湾盆地为例

拉分盆地是走滑断层系中受拉伸作用形成的断陷盆地.一般在两条平行断层控制下发育.盆地形似菱形,几何形态主要受两条主控走滑断层错距和叠接长度影响.本文以青藏高原东北缘海原断裂带老龙湾拉分盆地第四纪所处的构造环境为基础,参考盆地周围断层几何分布,建立了三维有限元数值模型,模拟该拉分盆地的演化过程;进一步分析了断层力学性质、地壳分层结构等各因素对盆地形成和演化的影响.模拟结果显示,盆地地表沉降伴随有下地壳物质的上涌,此上涌对盆地地表沉降存在阻碍作用.各因素的影响具体表现为:(1)断层力学性质(弹性模量和黏滞系数)越弱,其对构造应力较低的传递效率导致盆地两端差异性运动越明显,从而形成较大的盆地地表沉降和明显的上地壳减薄.(2)平行主控断层的叠接长度反映盆地形成的拉伸作用范围,叠接长度越大,相同的差异性运动在单位面积形成的拉伸应力越小,盆地地表沉降较小.(3)下地壳流变性影响其物质的上涌量,下地壳黏滞系数越小,其对上部拉伸作用的响应越明显,上涌量越大,此上涌对上地壳沉降形成的阻碍作用也越明显.根据老龙湾拉分盆地所处的构造格局,将平行断层的叠接长度取20km,当断层黏滞系数取值为周围基岩的1/10,参考该盆地第四纪构造演化历史,模拟得到的盆地第四纪下沉量与盆地内第四系沉积层厚度在规模上近似,下地壳黏滞系数取值在(2.5~5.0)×1021 Pa·s范围内时,盆地下沉量模拟结果与老龙湾拉分盆地第四系地层厚度吻合较好.     

Influence of Outcrop Scale Fractures on the Effective Stiffness of Fault Damage Zone Rocks

We combine detailed mapping and microstructural analyses of small fault zones in granodiorite with numerical mechanical models to estimate the effect of mesoscopic (outcrop-scale) damage zone fractures on the effective stiffness of the fault zone rocks. The Bear Creek fault zones were active at depths between 4 and 15 km and localize mesoscopic off-fault damage into tabular zones between two subparallel boundary faults, producing a fracture-induced material contrast across the boundary faults with softer rocks between the boundary faults and intact granodiorite outside the boundary faults. Using digitized fault zone fracture maps as the modeled fault geometries, we conduct nonlinear uniaxial compression tests using a novel finite-element method code as the experimental “laboratory” apparatus. Map measurements show that the fault zones have high nondimensional facture densities (>1), and damage zone fractures anastamose and intersect, making existing analytical effective medium models inadequate for estimation of the effective elastic properties. Numerical experiments show that the damage zone is strongly anisotropic and the bulk response of the fault zone is strain-weakening. Normal strains as small as 2% can induce a reduction of the overall stiffness of up to 75%. Fracture-induced effective stiffness changes are large enough to locally be greater than intact modulus changes across the fault due to juxtaposition of rocks of different lithologies; therefore mesoscopic fracturing is as important as rock type when considering material or bimaterial effects on earthquake mechanics. These results have important implications for earthquake rupture mechanics models, because mesoscopic damage zone fractures can cause a material contrast across the faults as large as any lithology-based material contrast at seismogenic depths, and the effective moduli can be highly variable during a single rupture event.     

GEOMETRY AND DEFORMATION TRANSFORMATION OF THE XIMALIN FAULT

The Ximalin fault is the northwest section of the Ximalin-Shuiquan fault, which is part of the north-edge fault zone of the Yanghe Basin, located in the conjunction of the Zhangjiakou-Bohai fault zone and Shanxi fault-depression basin, and its structural geometry and deformation characteristics can facilitate the research on the interaction of the two tectonic belts. In this paper, data of geological surveys and geophysical exploration are used to study this fault exhaustively, concerning its geometry, structural features and activity as well as its relationship with adjacent faults and rule in the deformation transform of the north-edge fault zone of the Yanghe Basin. The results show that the Ximalin Fault is a strike-slip feature with thrust component. Its vertical slip rates are 0.17mm/a and 0.25~0.38mm/a, and the horizontal slip rate is 0.58~0.67mm/a and 0.50mm/a during the late Middle Pleistocene and Holocene, respectively. It is formed alternately by the NW-trending main faults and secondary NE-trending faults, of which the former is characterized by high-angle reverse with sinistral strike-slip, and the latter shows normal faulting. The two sets of structures have specific structural geometry relations, and the motion manners and deformation characteristics match each other. During the active process of the north-edge fault of the Yanghe Basin, the NW trending Ximalin fault played a role similar to a transform fault in deformation change and stress transfer, and its sinistral strike slip activity accommodated the NE trending normal faulting at the both ends.     

鲜水河断裂带南段深部电性结构特征研究

通过对新都桥一小金剖面的大地电磁测深及重磁实测资料研究,结合区域地质资料,对鲜水河断裂带南段及邻区深部构造、壳内高导层、电性结构与历史地震的关系进行了研究.结果表明:(1)鲜水河断裂带深浅表现出不同特征,浅部是以地壳脆性-剪切带为主的断裂系统,深部是以走滑型-壳幔韧性剪切带为主的断裂系统,断裂呈花状形态,深部到达上地幔;(2)在丹巴构造带及鲜水河断裂带的中下地壳,广泛发育壳内高导层,其分布具有不均匀性,且与断裂带构造活动有关;(3)在鲜水河断裂带的走滑剪切作用下,上地壳物质发生原地重熔产生花岗岩浆是折多山花岗岩形成的主要机制;(4)鲜水河断裂带地震发生机理与塑性软弱层密切相关,受塑性软弱层拖拽作用,应力区集中在高阻体脆性介质内部靠近断层一侧,使得岩石破碎而发生地震.     

FIRST REPORT OF BERO ZECO ACTIVE FAULT IN GÊRZÊ, NORTHERN TIBET

In the interior of the Tibetan Plateau, the active tectonics are primarily marked by conjugate strike slip faults and north-trending rifts, which represent the E-W extension since late Cenozoic of the plateau. The conjugate faults are mainly composed of NE-trending left-lateral strike-slip faults in Qiangtang terrane and NW-trending right-lateral strike-slip faults in Lhasa terrane. While, the rifts mainly strike N, NNW and NNE within southern Tibet. However, it is still a debate on the deformational style and specific adjustment mechanism of E-W extension. One of key reasons causing this debate is the lack of detailed investigation of these active faults, especially within the northwestern plateau. Recently, we found a 20km long, NNW-trending active fault at Bero Zeco in northwestern Tibet. This fault is presented as fault sag ponds, channel offsets and fault scarps. Displacement of channels and geomorphic features suggested that the Bero Zeco Fault(BZF)is a dextral strike-slip fault with a small amount of normal slip component, which may result from the E-W extensional deformation in the interior of Tibet. BZF strikes N330°~340°W, as shown on the satellite image. The main Quaternary strata in the studied area are two stages alluvial fans around the Bero Zeco. From the satellite images, the old alluvial fans were cut by the lake shoreline leaving many of lake terraces. And the young fans cut across the lake terraces and the old fans. By contrasting to the "Paleo-Qiangtang Huge Lake" since late Quaternary, these old alluvial fans could be late Pleistocene with age ranging from 40ka to 50ka. And the young fans could be Holocene. The sag ponds along the BZF are distributed in the late Pleistocene alluvial fans. Also, the BZF displaced the late Pleistocene fans without traces within Holocene fans, suggesting that the BZF is a late Pleistocene active fault. The fault scarps are gentler with the slope angle of around 10° and the vertical offset is about 2m by field measurement. Reconstruction of the offset of channels suggested that the accumulated dextral offset could be about 44m on the late Pleistocene alluvial fans. Therefore, we infer that the dextral slip-rate could be around 1mm/a showing a low-rate deformation characteristic. The angle between the strike of BZF and principal compressive stress axis(σ₁)is around 30°, which is significantly different to the other faults within the conjugate strike-slip fault zones that is 60°~75°. Now, the deformation mechanisms on these conjugate faults are mainly proposed in the studies of obtuse angle between the faults and σ₁, which is likely not applicable for the BZF. We infer that the BZF could be the northward prolongation of the north-trending rifts based on the geometry. This difference suggests that the conjugate strike-slip faults may be formed by two different groups:one is obtuse angle, which is related to block extrusion or shear zones in Lhasa and Qiangtang terranes possibly; the other is acute angle, which may represent the characteristics of new-born fractures. And more studies are needed on their deformation mechanisms.     

Sedimentary fill history of the Huicheng Basin in the West Qinling Mountains and associated constraints on Mesozoic intracontinental tectonic evolution

The Qinling Orogenic Belt is divided commonly by the Fengxian-Taibai strike-slip shear zone and the Huicheng Basin into the East and West Qinling mountains,which show significant geological differences after the Indosinian orogeny.The Fengxian-Taibai fault zone and the Meso-Cenozoic Huicheng Basin,situated at the boundary of the East and West Qinling,provide a natural laboratory for tectonic analysis and sedimentological study of intracontinental tectonic evolution of the Qinling Orogenic Belt.In order to explain the dynamic development of the Huicheng Basin and elucidate its post-orogenic tectonic evolution at the junction of the East and West Qinling,we studied the geometry and kinematics of fault zones between the blocks of West Qinling,as well as the sedimentary fill history of the Huicheng Basin.First,we found that after the collisional orogeny in the Late Triassic,post-orogenic extensional collapse occurred in the Early and Middle Jurassic within the Qinling Orogenic Belt,resulting in a series of rift basins.Second,in the Late Jurassic and Early Cretaceous,a NE-SW compressive stress field caused large-scale sinistral strike-slip faults in the Qinling Orogenic Belt,causing intracontinental escape tectonics at the junction of the East and West Qinling,including eastward finite escape of the East Qinling micro-plate and southwest lateral escape of the Bikou Terrane.Meanwhile,the strike-slip-related Early Cretaceous sedimentary basin was formed with a right-order echelon arrangement in sinistral shear zones along the southern margin of the Huicheng fault.Overall during the Mesozoic,the Huicheng Basin and surrounding areas experienced four tectonic evolutionary stages,including extensional rift basin development in the Early and Middle Jurassic,intense compressive uplift in the Late Jurassic,formation of a strike-slip extensional basin in the Early Cretaceous,and compressive uplift in the Late Cretaceous.     

2008年汶川地震断层北川段的几何学与运动学特征及地震地质灾害效应

2008年5月12日M_S8.0 汶川大地震的主要发震断层是龙门山断裂带的映秀—北川断裂.本研究通过地震后的实地调查和地震前后高空间分辨率航空与卫星影像的解译,对映秀—北川断裂带北川段（擂鼓镇—曲山镇）同震地表破裂带的几何学与运动学特征及相关地震地质灾害进行了详细分析.研究结果表明5·12汶川大地震沿映秀—北川断裂带产生的地表破裂带正穿过北川县城—曲山镇中心,并在曲山镇周围诱发了一系列大型滑坡和岩崩等地质灾害,致使北川县城遭到毁灭性破坏.野外考察表明北川段最大逆冲量和右旋走滑量都达8~10 m,这也是映秀—北川地表地震破裂带中位移量最大的地段.同时,值得注意的是曲山镇一带正是地震断层几何学和运动学特征改变的转换地带：曲山镇及其南西部断层倾向北西,呈现以逆冲为主兼右旋走滑的特征;在曲山镇北东断层倾向南东,表现为右旋走滑分量与垂直分量相当,走滑活动特征更明显.研究结果还表明,逆冲-走滑型（或斜向逆冲型）同震地表破裂带的几何学和运动学特征直接影响地震地质灾害及其破坏程度,地震地质灾害的分布表现出明显的不对称性：断层NW盘（上盘）远远强于SE盘（下盘）.地震断层的几何学特征与断层运动的应力及坡向的自由面之间相互作用,加强了滑坡、岩崩等地质灾害的破坏力.因此,汶川大地震为我们研究逆冲-走滑型同震地表破裂的几何学、运动学特征及其地震地质灾害效应提供了契机.     

Fault growth by segment linkage in seismically active settings: Examples from the Southern Apennines, Italy, and the Coast Ranges, California

Most models for fault growth and scaling are based on analysis of faults which display dip-slip (i.e. reverse, normal) and strike-slip kinematics; by contrast, little information is derived from faults displaying oblique-slip kinematics. Observations on mesoscopic transpressional faults from the Salinian Block of California and transtensional faults from the Southern Apennines of Italy reveal a complex kinematic history of fault propagation. Faults initially nucleate as isolate segments, which are later kinematically and mechanically linked via development of diffuse deformation zones and/or localised oblique connecting splays. The geometry of observed mesoscopic faults is similar to that of the host, larger structures, thus suggesting that the produced fault patterns are scale independent. Moreover, the overprinting relationships among minor fault-related fabrics permit to define a relative chronology within fault arrays, thus enabling a general sequence of structural stages to be correctly established. Based on minor fabrics and their overprinting relationships, a kinematic deformation model of fault growth by segment linkage is presented, which may have a wide applicability in the field of seismic hazard evaluation.     

对汶川地震小鱼洞地表破裂带的调查分析

2008年5月12日的汶川8.0级地震使龙门山断裂带形成了3条同震地表破裂带,这表明有多条活动断层同时参与地震破裂,其过程复杂,现象丰富。本文对小鱼洞地表破裂带及其与另2条地表破裂带的交汇区域进行了野外调查,并对小鱼洞地表破裂带的活动性质和展布特征进行了分析。小鱼洞地表破裂带位于彭州市小鱼洞镇附近,是汶川8.0级地震形成的一条走向NW的逆冲并具有左旋走滑分量的同震地表变形带。调查结果显示,小鱼洞地表破裂带表现出明显的分段性特征：小鱼洞镇一带的中段,逆冲量和走滑量最大;小鱼洞镇向东南方向延伸的南段,逆冲量和走滑量逐渐变小;小鱼洞镇向西北方向进入山区的北段,则表现为以逆冲为主的活动性质。     

THE LATE QUATERNARY ACTIVITY AND FORMATION MECHANISM OF BAOERTU FAULT ZONE,EASTERN TIANSHAN SEGMENT

Influenced by the far-field effect of India-Eurasia collision, Tianshan Mountains is one of the most intensely deformed and seismically active intracontinental orogenic belts in Cenozoic. The deformation of Tianshan is not only concentrated on its south and north margins, but also on the interior of the orogen. The deformation of the interior of Tianshan is dominated by NW-trending right-lateral strike-slip faults and ENE-trending left-lateral strike-slip faults. Compared with numerous studies on the south and north margins of Tianshan, little work has been done to quantify the slip rates of faults within the Tianshan Mountains. Therefore, it is a significant approach for geologists to understand the current tectonic deformation style of Tianshan Mountains by studying the late Quaternary deformation characteristics of large fault and fold zones extending through the interior of Tianshan. In this paper, we focus on a large near EW trending fault, the Baoertu Fault (BETF) in the interior of Tianshan, which is a large fault in the eastern Tianshan area with apparent features of deformation, and a boundary fault between the central and southern Tianshan. An M_S5.0 earthquake event occurred on BETF, which indicates that this fault is still active. In order to understand the kinematics and obtain the late Quaternary slip rate of BETF, we made a detailed research on its late Quaternary kinematic features based on remote sensing interpretation, drone photography, and field geological and geomorphologic survey, the results show that the BETF is of left-lateral strike-slip with thrust component in late Quaternary. In the northwestern Kumishi basin, BETF sinistrally offsets the late Pleistocene piedmont alluvial fans, forming fault scarps and generating sinistral displacement of gullies and geomorphic surfaces. In the bedrock region west of Benbutu village, BETF cuts through the bedrock and forms the trough valley. Besides, a series of drainages or rivers which cross the fault zone and date from late Pleistocene have been left-laterally offset systematically, resulting in a sinistral displacement ranging 0.93~4.53km. By constructing the digital elevation model (DEM) for the three sites of typical deformed morphologic units, we measured the heights of fault scarps and left-lateral displacements of different gullies forming in different times, and the result shows that BEFT is dominated by left-lateral strike-slip with thrust component. We realign the bended channels across the fault at BET01 site and obtain the largest displacement of 67m. And we propose that the abandon age of the deformed fan is about 120ka according to the features of the fan. Based on the offsets of channels at BET01 and the abandon age of deformed fan, we estimate the slip rate of 0.56mm/a since late Quaternary. The Tianshan Mountains is divided into several sub-blocks by large faults within the orogen. The deformation in the interior of Tianshan can be accommodated or absorbed by relative movement or rotation. The relative movement of the two sub-blocks surrounded by Boa Fault, Kaiduhe Fault and BETF is the dominant cause for the left-lateral movement of BETF. The left-lateral strike-slip with reverse component of BETF in late Quaternary not only accommodates the horizontal stain within eastern Tianshan but also absorbs some SN shortening of the crust.     

Geometry of the Nojima Fault at Nojima-Hirabayashi, Japan – II. Microstructures and their Implications for Permeability and Strength

Samples of damage-zone granodiorite and fault core from two drillholes into the active, strike-slip Nojima fault zone display microstructures and alteration features that explain their measured present-day strengths and permeabilities and provide insight on the evolution of these properties in the fault zone. The least deformed damage-zone rocks contain two sets of nearly perpendicular (60–90° angles), roughly vertical fractures that are concentrated in quartz-rich areas, with one set typically dominating over the other. With increasing intensity of deformation, which corresponds generally to increasing proximity to the core, zones of heavily fragmented rock, termed microbreccia zones, develop between prominent fractures of both sets. Granodiorite adjoining intersecting microbreccia zones in the active fault strands has been repeatedly fractured and locally brecciated, accompanied by the generation of millimeter-scale voids that are partly filled with secondary minerals. Minor shear bands overprint some of the heavily deformed areas, and small-scale shear zones form from the pairing of closely spaced shear bands. Strength and permeability measurements were made on core collected from the fault within a year after a major (Kobe) earthquake. Measured strengths of the samples decrease regularly with increasing fracturing and fragmentation, such that the gouge of the fault core and completely brecciated samples from the damage zone are the weakest. Permeability increases with increasing disruption, generally reaching a peak in heavily fractured but still more or less cohesive rock at the scale of the laboratory samples. Complete loss of cohesion, as in the gouge or the interiors of large microbreccia zones, is accompanied by a reduction of permeability by 1-2 orders of magnitude below the peak values. The core samples show abundant evidence of hydrothermal alteration and mineral precipitation. Permeability is thus expected to decrease and strength to increase somewhat in active fault strands between earthquakes, as mineral deposits progressively seal fractures and fill pore spaces.     

Cenozoic structural deformation and expression of the “Tan-Lu Fault Zone” in the West Sag of Liaohe Depression, Bohaiwan basin province, China

Based on the interpretation of 3D seismic data and structural mapping we analyzed the geometry and kinematics of the fault system and validated the expression of the “Tan-Lu Fracture Zone” in the West Sag of Liaohe Depression, Bohaiwan basin province. The Cenozoic structural deformation within the West Sag of Liaohe Depression can be divided into extensional structure system and dextral structure system. The extensional system is constituted by numerous NNE-NE trending Paleogene normal faults, where the Taian-Dawa fault (F1) is the master boundary fault (MBF) dominating the deposition during Paleogene so that the sag shows a complex half-graben with “boundary fault in the east and overlap in the west”. The dextral system is constituted by 2–3 dextral basement faults in NNE-NE trending (F2, F3, F4) and associated structure, and the time of structural action started in Oligocene and continued to Quarternary so that some associated secondary faults of the dextral system cut off the Neogene and Quaternary. Under the influence of the position and attitude of NNE-NE trending basement strike-slip faults, the central north part and the south part of the West Sag show obviously different structural features. The former appears to be a complex “graben” structure limited by the reversed strike-slip fault in the west and bounded by the inverted normal fault in the east, the latter remains the complex half-graben structure with “boundary fault in the east and overlap in the west”, and the graben was mildly reconstructed by one or two normal strike-slip faults. The dextral system within the West Sag is the element of the west branch fault of the Tan-Lu Fracture Zone, which is a deep fracture zone extending along the east of the Liaodongwan Gulf. The deep fracture zone branches off into two separate faults within the Liaohe Depression. The east branch goes through from northern part of the Liaodongwan Gulf to the East Sag of Liaohe Depression and links with the Denghua-Mishan Fault near Shenyang, and the west branch passes from northern part of the Liaodongwan Gulf to the West Sag and Damintun Sag of Liaohe Depression and links with the Yilan-Yitong Fault. The principal displacement zone of the west branch of the Tan-Lu Fracture Zone cuts off the master extensional fault (F1) within the West Sag of Liaohe Depression and induces many cover faults in EW trending within the Neogene and Quaternary.     

Formation and Suppression of Strike–Slip Fault Systems

Strike–slip faults are a defining feature of plate tectonics, yet many aspects of their development and evolution remain unresolved. For intact materials and/or regions, a standard sequence of shear development is predicted from physical models and field studies, commencing with the formation of Riedel shears and culminating with the development of a throughgoing fault. However, for materials and/or regions that contain crustal heterogeneities (normal and/or thrust faults, joints, etc.) that predate shear deformation, kinematic evolution of strike–slip faulting is poorly constrained. We present a new plane-stress finite-strain physical analog model developed to investigate primary deformation zone evolution in simple shear, pure strike–slip fault systems in which faults or joints are present before shear initiation. Experimental results suggest that preexisting mechanical discontinuities (faults and/or joints) have a marked effect on the geometry of such systems, causing deflection, lateral distribution, and suppression of shears. A lower limit is placed on shear offset necessary to produce a throughgoing fault in systems containing preexisting structures. Fault zone development observed in these experiments provides new insight for kinematic interpretation of structural data from strike–slip fault zones on Earth, Venus, and other terrestrial bodies.     

Characterization of Fault Zones

— There are currently three major competing views on the essential geometrical, mechanical, and mathematical nature of faults. The standard view is that faults are (possibly segmented and heterogeneous) Euclidean zones in a continuum solid. The continuum-Euclidean view is supported by seismic, gravity, and electromagnetic imaging studies; by successful modeling of observed seismic radiation, geodetic data, and changes in seismicity patterns; by detailed field studies of earthquake rupture zones and exhumed faults; and by recent high resolution hypocenter distributions along several faults. The second view focuses on granular aspects of fault structures and deformation fields. The granular view is supported by observations of rock particles in fault zone gouge; by studies of block rotations and the mosaic structure of the lithosphere (which includes the overall geometry of plate tectonics); by concentration of deformation signals along block boundaries; by correlation of seismicity patterns on scales several times larger than those compatible with a continuum framework; and by strongly heterogeneous wave propagation effects on the earth's surface. The third view is that faults are fractal objects with rough surfaces and branching geometry. The fractal view is supported by some statistical analysis of regional hypocenter locations; by long-range correlation of various measurements in geophysical boreholes; by the fact that observed power-law statistics of earthquakes are compatible with an underlying scale-invariant geometrical structure; by geometrical analysis of fault traces at the earth's surface; and by measurements of joint and fault surfaces topography.¶There are several overlaps between expected phenomenology in continuum-Euclidean, granular, and fractal frameworks of crustal deformation. As examples, highly heterogeneous seismic wavefields can be generated by granular media, by fractal structures, and by ground motion amplification around and scattering from an ensemble of Euclidean fault zones. A hierarchical granular structure may have fractal geometry. Power-law statistics of earthquakes can be generated by slip on one or more heterogeneous planar faults, by a fractal collection of faults, and by deformation of granular material. Each of the three frameworks can produce complex spatio-temporal patterns of earthquakes and faults. At present the existing data cannot distinguish unequivocally between the three different views on the nature of fault zones or determine their scale of relevance. However, in each observational category, the highest resolution results associated with mature large-displacement faults are compatible with the standard continuum-Euclidean framework. This can be explained by a positive feedback mechanism associated with strain weakening rheology and localization, which attracts the long-term evolution of faults toward progressive regularization and Euclidean geometry. A negative feedback mechanism associated with strain hardening during initial deformation phases and around persisting geometrical irregularities and conjugate sets of faults generates new fractures and granularity at different scales. We conclude that long-term deformation in the crust, including many aspects of the observed spatio-temporal complexity of earthquakes and faults, may be explained to first order within the continuum-Euclidean framework.     

Segmentation along Strike-Slip Faults Revisited

Fault segmentation and fault steps and their evolution are relevant to the dynamics and size of earthquake ruptures, the distribution of fault damage zones and the capacity of fault seal. Furthermore, segment interactions and coalescence are the fundamental processes for fault growth. To contribute to this end, we investigated the architecture of strike-slip faults by combining field observations in the Valley of Fire State Park, Nevada, and the published data sets. First, we studied the trace complexity for 49 faults with offsets ranging from 12 m to 460 km. We established that the number of fault steps (hence fault segments) per unit length is correlated to the maximum fault offset by a negative power law. The faults have longer segments and fewer steps when their offsets increase, indicating the progressive growth, smoothening and simplification of the fault traces as a function of the offset, as proposed by previous investigators. Second, we studied the dimensions of the segments and steps composing ~20 of the previous fault systems. The mean segment length, mean step length and mean step width are all correlated to the maximum fault offset by positive power laws over four orders of magnitude of the offset. In addition, the segment length distributions of four of the faults with offsets ranging from 80 m to 100 km are all lognormal, with most of the segment lengths falling in the range of one to five times the maximum offset of the faults. Finally, the fault steps have an approximately constant length-to-width ratio indicating that, regardless of their environment, strike-slip faults have a remarkable self-similar architecture probably due to the mechanical processes responsible for fault growth. Our data sets can be used as tools to better predict the geometrical attributes of strike-slip fault systems with important consequences for earthquake ruptures, the distribution and properties of fault damage zones, and fault sealing potential.     

莱州湾海域郯庐断裂带活断层探测

利用浅地层剖面仪对郯庐断裂带莱州湾段进行了活断层探测,发现郯庐断裂带主干断裂在第四纪晚期以来具有明显的活动,继承了晚第三纪以来的主要构造活动特点,仍是这一区域的主导性构造. 西支KL3断裂由多条高角度正断裂组成,最新活动时代为晚更新世晚期至全新世早期,受到一系列错断晚更新世晚期沉积的北东或近东西向断裂的切割;东支龙口断裂由两段右阶斜列的次级断层组成,沿断裂带不但有明显的晚第四纪断错活动,而且还发育北北东向晚第四纪生长褶皱,表现出明显的晚更新世晚期至全新世活动特征. 在山东陆地区也发现了与龙口断裂相对应的安丘——莒县断裂,安丘段由一系列右阶斜列的次级断层组成. 从安丘向北至莱州湾凹陷,郯庐断裂带东支活断层构成了一条右旋单剪变形带,每一个次级活断层段相当于带内理论上次级压剪面,在第四纪晚期以来仍以右旋走滑活动为主要特征.      

Controls on the geometry of a Holocene crater row: a field study from southwest Iceland

The Reykjanes Peninsula rift zone in southwest Iceland is a highly oblique segment of the Mid-Atlantic ridge system which accommodates NW–SE extension during rifting episodes that consist of eruptions and normal faulting, and E–W left-lateral shear strain along strike-slip faults during longer amagmatic periods. Dominant tectonic features on the peninsula are a series of generally NE-striking, sub-parallel eruptive fissures and normal faults, and a cross-cutting zone of N–S striking, right-lateral strike-slip faults. The last series of rifting episodes ended in 1227, and a proposed 1,000 year cyclicity predicts the start of a new series of eruptions within the next 200 years. In order to more accurately characterize the nature of eruptions on the Reykjanes Peninsula, we present a new, spatially accurate map of the ∼2,350 year old Sundhnúkur crater row in the western part of the peninsula, which was examined in detail in order to determine the structural controls on crater row geometry and to understand the interactions that take place between eruptive fissures and pre-existing geological structures. Volcanism is sometimes influenced by small perturbations in the surroundings such as gravitational loading, topography, changes in crustal properties or the presence of fault zones, but there are few field examples showing how fissures are influenced by these pre-existing structures. We identify 27 fissure segments, ranging in strike from 006° to 053°, with varying spacing and overlap between them. Significant local variability in strike and stepping sense of segments occurs in proximity to topographic highs as well as within zones of faulting that pre-date the crater row. Strike also varies at the northern end of the crater row as it approaches a region of older crust at the rift margin. Our data support numerical and laboratory modeling results which show that local topography, pre-existing fractures and crustal properties influence the path taken by magma on its way through the shallow crust.