Three‐dimensional potential field data inversion with L0 quasinorm sparse constraints

The quantitative explanation of the potential field data of three‐dimensional geological structures remains one of the most challenging issues in modern geophysical inversion. Obtaining a stable solution that can simultaneously resolve complicated geological structures is a critical inverse problem in the geophysics field. I have developed a new method for determining a three‐dimensional petrophysical property distribution, which produces a corresponding potential field anomaly. In contrast with the tradition inverse algorithm, my inversion method proposes a new model norm, which incorporates two important weighting functions. One is the L0 quasi norm (enforcing sparse constraints), and the other is depth‐weighting that counteracts the influence of source depth on the resulting potential field data of the solution. Sparseness constraints are imposed by using the L0 quasinorm on model parameters. To solve the representation problem, an L0 quasinorm minimisation model with different smooth approximations is proposed. Hence, the data space (N) method, which is much smaller than model space (M), combined with the gradient‐projected method, and the model space, combined with the modified Newton method for L0 quasinorm sparse constraints, leads to a computationally efficient method by using an N × N system versus an M × M one because N ? M. Tests on synthetic data and real datasets demonstrate the stability and validity of the L0 quasinorm spare norms inversion method. With the aim of obtaining the blocky results, the inversion method with the L0 quasinorm sparse constraints method performs better than the traditional L2 norm (standard Tikhonov regularisation). It can obtain the focus and sparse results easily. Then, the Bouguer anomaly survey data of the salt dome, offshore Louisiana, is considered as a real case study. The real inversion result shows that the inclusion the L0 quasinorm sparse constraints leads to a simpler and better resolved solution, and the density distribution is obtained in this area to reveal its geological structure. These results confirm the validity of the L0 quasinorm sparse constraints method and indicate its application for other potential field data inversions and the exploration of geological structures.     

Inversion of elongated magnetic anomalies using magnitude transforms

The calculable magnitudes of the anomalous magnetic field from simple 2D sources and their gradients and Laplacians appear as ratios that can be synthesized in functional forms, corresponding to the different source shapes. Field components and first‐order derivatives are involved in the inversion procedures presented. The structural index and source depth are estimated independently of each other. The applied functions allow magnetic profiles and magnetic maps to be shape‐ and depth‐converted with immediate imaging of the inversion results. The contours of these functions outline elongated loops around the 2.5D anomaly axis on magnetic maps. The width of the loops reflects the depth and structural index N of the source in the scale units of the inverted map. Model and field tests illustrate the effectiveness of this approach for fast automatic inversion of large sets of magnetic data for depth, shape, length and location of simple sources.     

基于Extrapolation Tikhonov正则化算法的重力数据三维约束反演

通过研究重力数据三维反演解的病态性,利用基于拉格朗日插值方法的Extrapolation Tikhonov正则化方法来解决反演中解的不唯一性和不稳定性问题,该方法最大限度的减少了因正则化参数的引入而在反演结果中介入的误差,同时详细讨论了基于三种选择原则的正则化双参数的具体选择方法,模型试算结果表明,与原Tikhonov方法相比,该方法提高了反演的拟合精度.其次,为了消除核函数随深度增加而快速衰减对反演结果的影响,本文改进了前人的重力数据三维反演深度加权函数,改进后的加权函数与原函数相比能更好的识别异常体底部密度分布特征,对于埋深较深的异常体具有较好的识别效果,更好的解决了由近地面趋肤效应作用引起的密度分布不均的问题.同时,利用上下限约束函数限制每一个立方体的密度差范围,并应用于多组人工合成模型.结果表明:该反演方法能准确地获得正演模型的预设参数范围和位置.     

Electric field data in inductive source electromagnetic surveys

Measurement of the electric field data due to an inductive loop source in a controlled source electromagnetic survey is not common, because electric field data, usually involving grounded electrodes, are expensive to acquire and difficult to interpret. With the recently developed capability of versatile three‐dimensional inversion, we revisit the idea of measuring electric field in a large ground loop survey for mineral exploration. The three‐dimensional modelling and inversion approach helps us quantitatively understand the detectability and recoverability of the proposed survey configuration. Our detectability study using forward modelling shows that the relative anomaly (percentage difference) in electric field does not decay with a lower induction number, but the conventional magnetic field data (dB/dt) does. Our recoverability study examines how much and what kind of information can be extracted from electric field data for the reconstruction of a three‐dimensional model. Synthetic inversions show the following observations. (i) Electric field data are good at locating lateral discontinuity, whereas dB/dt has better depth resolution. (ii) Electric field is less sensitive to the background conductivity and, thus, is prone to misinterpretation because of a bad initial model in inversion. We recommend warm‐starting the electric field inversion with an initial model from a separate dB/dt inversion. (iii) Electric field data may be severely contaminated by near‐surface heterogeneity, but an inversion can recover the deep target concealed by the geologic noise. (iv) Even one line of single‐component electric field data can greatly improve the horizontal resolution in a dB/dt inversion. Finally, we investigate a field dataset of both electric field and dB/dt measurements at a uranium deposit. The field example confirms that the electric field and magnetic field data contain independent information that is crucial in the accurate recovery of subsurface conductivity. Our synthetic and field examples demonstrate the benefit of acquiring electric field data along with magnetic field data in an inductive source survey.     

Power function decay of hydraulic conductivity for a TOPMODEL‐based infiltration routine

TOPMODEL rainfall‐runoff hydrologic concepts are based on soil saturation processes, where soil controls on hydrograph recession have been represented by linear, exponential, and power function decay with soil depth. Although these decay formulations have been incorporated into baseflow decay and topographic index computations, only the linear and exponential forms have been incorporated into infiltration subroutines. This study develops a power function formulation of the Green and Ampt infiltration equation for the case where the power n = 1 and 2. This new function was created to represent field measurements in the New York City, USA, Ward Pound Ridge drinking water supply area, and provide support for similar sites reported by other researchers. Derivation of the power‐function‐based Green and Ampt model begins with the Green and Ampt formulation used by Beven in deriving an exponential decay model. Differences between the linear, exponential, and power function infiltration scenarios are sensitive to the relative difference between rainfall rates and hydraulic conductivity. Using a low‐frequency 30 min design storm with 4·8 cm h^?1 rain, the n = 2 power function formulation allows for a faster decay of infiltration and more rapid generation of runoff. Infiltration excess runoff is rare in most forested watersheds, and advantages of the power function infiltration routine may primarily include replication of field‐observed processes in urbanized areas and numerical consistency with power function decay of baseflow and topographic index distributions. Equation development is presented within a TOPMODEL‐based Ward Pound Ridge rainfall‐runoff simulation. Copyright © 2006 John Wiley & Sons, Ltd.     

井地磁异常模量联合反演

三维反演是磁测数据定量解释的重要方法,在金属矿勘探中扮演着重要的角色.但是在实际矿区的应用中,传统的磁总场异常反演方法依然存在两个问题：一是地面磁异常反演的深度分辨率较低,深部场源体的成像效果差;二是金属矿中可能包含强剩磁,反演结果可能是完全错误的.尽管前人对上述两个问题分别进行了广泛的研究,但尚未尝试同时解决这两个问题.本文在前人研究的基础上,提出了一种井地磁异常模量联合反演方法,该方法需要的控制参数少,无需加入额外的地质信息,且可用于多场源复杂磁异常的反演,具有较强的适用性.本文方法首先将地面和井中磁异常转化为模量数据,然后利用基于核函数或距离的加权函数将井地模量数据结合起来,使得该方法适用于联合反演.我们利用井地多种异常参量进行反演的模型试验表明,在强剩磁存在时,本文方法的效果优于其他方法,在减少剩磁影响的同时,也改善了深部成像效果,具有良好的应用前景.     

基于最小反演拟合差的重磁场源深度计算方法

以等效源及位场物性反演为基础,本文提出一种新的求取重磁场源深度的方法.该方法将一层等效源以一定的间隔从浅部向深部移动,并将等效源作为初始模型进行反演,当反演拟合差最小时,停止反演,此时的等效源底深即为所求场源的中心深度.由于仅需要反演一层等效源,比传统的物性反演计算时间大大减少,并且不需要进行深度加权约束.理论模型数据处理结果表明该方法能够获得较准确的场源深度:以长宽比为7.5的薄板模型为例,深度计算误差约为1个点距(25 m);以长宽比为0.5~1.5的厚板模型为例,深度计算误差小于1个点距(25m).将该方法应用于实测航磁梯度数据,计算的磁源中心深度在200~250m之间,钻井资料显示该异常由埋藏深度在200~300m的闪长岩引起,计算结果与钻井资料较吻合.     

Interval inversion of well-logging data for objective determination of textural parameters

A joint inversion method for the evaluation of well-logging data is presented, which is applicable to determine textural parameters, i.e., cementation exponent, saturation exponent and tortuosity factor, simultaneously with conventional petrophysical properties. The inversion techniques used today perform local interpretation. Since the number of unknowns is slightly lower than that of the data estimated locally to one depth-point, a set of marginally overdetermined inverse problems has to be solved. For preserving the overdetermination, textural parameters must be kept constant for longer depth intervals (i.e., 200–300 m), despite the fact that they seem to be varying faster with depth according to field experiences. An inversion method was developed, which inverts data of a greater depth interval jointly in a highly overdetermined inversion procedure and gives a better resolution (10 m or less) estimate for the textural parameters. In the paper, a set of inversion tests on synthetic data as well as a field example prove the feasibility of the method.     

Effects of the sea floor topography on the 1D inversion of time‐domain marine controlled source electromagnetic data

Time‐domain marine controlled source electromagnetic methods have been used successfully for the detection of resistive targets such as hydrocarbons, gas hydrate, or marine groundwater aquifers. As the application of time‐domain marine controlled source electromagnetic methods increases, surveys in areas with a strong seabed topography are inevitable. In these cases, an important question is whether bathymetry information should be included in the interpretation of the measured electromagnetic field or not. Since multi‐dimensional inversion is still not common in time‐domain marine controlled source electromagnetic methods, bathymetry effects on the 1D inversion of single‐offset and multi‐offset joint inversions of time‐domain controlled source electromagnetic methods data are investigated. We firstly used an adaptive finite element algorithm to calculate the time‐domain controlled source electromagnetic methods responses of 2D resistivity models with seafloor topography. Then, 1D inversions are applied on the synthetic data derived from marine resistivity models, including the topography in order to study the possible topography effects on the 1D interpretation. To evaluate the effects of topography with various steepness, the slope angle of the seabed topography is varied in the synthetic modelling studies for deep water (air interaction is absent or very weak) and shallow water (air interaction is dominant), respectively. Several different patterns of measuring configurations are considered, such as the systems adopting nodal receivers and the bottom‐towed system. According to the modelling results for deep water when air interaction is absent, the 2D topography can distort the measured electric field. The distortion of the data increases gradually with the enlarging of the topography's slope angle. In our test, depending on the configuration, the seabed topography does not affect the 1D interpretation significantly if the slope angle is less or around 10°. However, if the slope angle increases to 30° or more, it is possible that significant artificial layers occur in inversion results and lead to a wrong interpretation. In a shallow water environment with seabed topography, where the air interaction dominates, it is possible to uncover the true subsurface resistivity structure if the water depth for the 1D inversion is properly chosen. In our synthetic modelling, this scheme can always present a satisfactory data fit in the 1D inversion if only one offset is used in the inversion process. However, the determination of the optimal water depth for a multi‐offset joint inversion is challenging due to the various air interaction for different offsets.     

Parsimonious wave‐equation travel‐time inversion for refraction waves

We present a parsimonious wave‐equation travel‐time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N geophones evenly deployed along the line. These two reciprocal shots contain approximately 2N refraction travel times, which can be spawned into refraction travel times by an interferometric transformation. Then, these virtual refraction travel times are used with a source wavelet to create N virtual refraction shot gathers, which are the input data for wave‐equation travel‐time inversion. Numerical results show that the parsimonious wave‐equation travel‐time tomogram has about the same accuracy as the tomogram computed by standard wave‐equation travel‐time inversion. The most significant benefit is that a reciprocal survey is far less time consuming than the standard refraction survey where a source is excited at each geophone location.     

A nonlinear method for multiparameter inversion of pre‐stack seismic data based on anisotropic Markov random field

Multiparameter inversion for pre‐stack seismic data plays a significant role in quantitative estimation of subsurface petrophysical properties. However, it remains a complicated problem due to the non‐unique results and unstable nature of the processing; the pre‐stack seismic inversion problem is ill‐posed and band‐limited. Combining the full Zoeppritz equation and additional assumptions with edge‐preserving regularisation can help to alleviate these problems. To achieve this, we developed an inversion method by constructing a new objective function that includes edge‐preserving regularisation and soft constraints based on anisotropic Markov random fields and is intended especially for layered formations. We applied a fast simulated annealing algorithm to solve the nonlinear optimisation problem. The method directly obtains reflectivity R_PP values using the full Zoeppritz equation instead of its approximations and effectively controls the stability of the multiparameter inversion by assuming a sectionally constant S‐ and P‐wave velocity ratio and using the generalised Gardner equation. We substituted the inverted parameters, i.e., the P‐wave velocity, the fitting deviation of S‐wave velocity, and the density were inverted instead of the P‐wave velocity, the S‐wave velocity, and the density, and the generalised Gardner equation was applied as a constraint. Test results on two‐dimensional synthetic data indicated that our substitution obtained improved results for multiparameter inversion. The inverted results could be improved by utilising high‐order anisotropic Markov random field neighbourhoods at early stages and low‐order anisotropic Markov random field neighbourhoods in the later stages. Moreover, for layered formations, using a large horizontal weighting coefficient can preserve the lateral continuity of layers, and using a small vertical weighting coefficient allows for large longitudinal gradients of the interlayers. The inverted results of the field data revealed more detailed information about the layers and matched the logging curves at the wells acceptably over most parts of the curves.     

Appraisal of a new 1D weighted joint inversion of ground based and helicopter‐borne electromagnetic data

In order to couple spatial data from frequency‐domain helicopter‐borne electromagnetics with electromagnetic measurements from ground geophysics (transient electromagnetics and radiomagnetotellurics), a common 1D weighted joint inversion algorithm for helicopter‐borne electromagnetics, transient electromagnetics and radiomagnetotellurics data has been developed. The depth of investigation of helicopter‐borne electromagnetics data is rather limited compared to time‐domain electromagnetics sounding methods on the ground. In order to improve the accuracy of model parameters of shallow depth as well as of greater depth, the helicopter‐borne electromagnetics, transient electromagnetics, and radiomagnetotellurics measurements can be combined by using a joint inversion methodology. The 1D joint inversion algorithm is tested for synthetic data of helicopter‐borne electromagnetics, transient electromagnetics and radiomagnetotellurics. The proposed concept of the joint inversion takes advantage of each method, thus providing the capability to resolve near surface (radiomagnetotellurics) and deeper electrical conductivity structures (transient electromagnetics) in combination with valuable spatial information (helicopter‐borne electromagnetics). Furthermore, the joint inversion has been applied on the field data (helicopter‐borne electromagnetics and transient electromagnetics) measured in the Cuxhaven area, Germany. In order to avoid the lessening of the resolution capacities of one data type, and thus balancing the use of inherent and ideally complementary information content, a parameter reweighting scheme that is based on the exploration depth ranges of the specific methods is proposed. A comparison of the conventional joint inversion algorithm, proposed by Jupp and Vozoff ( 1975 ), and of the newly developed algorithm is presented. The new algorithm employs the weighting on different model parameters differently. It is inferred from the synthetic and field data examples that the weighted joint inversion is more successful in explaining the subsurface than the classical joint inversion approach. In addition to this, the data fittings in weighted joint inversion are also improved.     

Assessing radial transmissivity variation in heterogeneous aquifers using analytical techniques

Pumping tests are one of the most commonly used in situ testing techniques for assessing aquifer hydraulic properties. Numerous researches have been conducted to predict the effects of aquifer heterogeneity on the groundwater levels during pumping tests. The objectives of the present work were as follows: (1) to predict drawdown conditions and to estimate aquifer properties during pumping tests undertaken in radially symmetric heterogeneous aquifers, and (2) to identify a method for assessing the transmissivity field along the radial coordinate in radially symmetric and fully heterogeneous transmissivity fields. The first objective was achieved by expanding an existing analytical drawdown formulation that was valid for a radially symmetric confined aquifer with two concentric zones around the pumping well to an N concentric zone confined aquifer having a constant transmissivity value within each zone. The formulation was evaluated for aquifers with three and four concentric zones to assess the effects of the transmissivity field on the drawdown conditions. The specific conditions under which aquifer properties could be identified using traditional methods of analysis were also evaluated. The second objective was achieved by implementing the inverse solution algorithm (ISA), which was developed for petroleum reservoirs to groundwater aquifer settings. The results showed that the drawdown values are influenced by a volumetric integral of a weighting function and the transmissivity field within the cone of depression. The weighting function migrates in tandem with the expanding cone of depression. The ability of the ISA to predict radially symmetric and log‐normally distributed transmissivity fields was assessed against analytical and numerical benchmarks. The results of this investigation indicated that the ISA method is a viable technique for evaluating the radial transmissivity variations of heterogeneous aquifer settings. Copyright © 2013 John Wiley & Sons, Ltd.     

正则化方法在无线电波层析中的应用

无线电波透视法是常用的工作面地质构造探测方法之一,目前普遍使用的SIRT方法层析分辨率不高。本文采用约束正则化方法,推导Tikhonov正则化和全变差正则化的最小化问题表达式,讨论影响层析结果的主要因素,对典型理论模型进行了层析成像实验。结果表明:正则化方法具有比SIRT方法更好的分辨率;射线条数越多、噪声水平越低,层析分辨率越高;Tikhonov正则化在正则参数增大时层析结果更光滑,减小时则更贴近异常,全变差正则化与其相反。最后对实际坑透数据进行层析,识别出的异常构造基本吻合已知疑似构造位置,从而说明正则化方法在无线电波透视应用中的可行性。      

Inversion of controlled‐source electromagnetic data using a model‐based approach

A two‐and‐half dimensional model‐based inversion algorithm for the reconstruction of geometry and conductivity of unknown regions using marine controlled‐source electromagnetic (CSEM) data is presented. In the model‐based inversion, the inversion domain is described by the so‐called regional conductivity model and both geometry and material parameters associated with this model are reconstructed in the inversion process. This method has the advantage of using a priori information such as the background conductivity distribution, structural information extracted from seismic and/or gravity measurements, and/or inversion results a priori derived from a pixel‐based inversion method. By incorporating this a priori information, the number of unknown parameters to be retrieved becomes significantly reduced. The inversion method is the regularized Gauss‐Newton minimization scheme. The robustness of the inversion is enhanced by adopting nonlinear constraints and applying a quadratic line search algorithm to the optimization process. We also introduce the adjoint formulation to calculate the Jacobian matrix with respect to the geometrical parameters. The model‐based inversion method is validated by using several numerical examples including the inversion of the Troll field data. These results show that the model‐based inversion method can quantitatively reconstruct the shapes and conductivities of reservoirs.     

First‐arrival traveltime tomography with modified total‐variation regularization

First‐arrival traveltime tomography is a robust tool for near‐surface velocity estimation. A common approach to stabilizing the ill‐posed inverse problem is to apply Tikhonov regularization to the inversion. However, the Tikhonov regularization method recovers smooth local structures while blurring the sharp features in the model solution. We present a first‐arrival traveltime tomography method with modified total‐variation regularization to preserve sharp velocity contrasts and improve the accuracy of velocity inversion. To solve the minimization problem of the new traveltime tomography method, we decouple the original optimization problem into the two following subproblems: a standard traveltime tomography problem with the traditional Tikhonov regularization and a L₂ total‐variation problem. We apply the conjugate gradient method and split‐Bregman iterative method to solve these two subproblems, respectively. Our synthetic examples show that the new method produces higher resolution models than the conventional traveltime tomography with Tikhonov regularization, and creates less artefacts than the total variation regularization method for the models with sharp interfaces. For the field data, pre‐stack time migration sections show that the modified total‐variation traveltime tomography produces a near‐surface velocity model, which makes statics corrections more accurate.     

THE NON-LINEAR INVERSION OF SEISMIC WAVEFORMS CAN BE PERFORMED EITHER BY TIME EXTRAPOLATION OR BY DEPTH EXTRAPOLATION1

The classical aim of non-linear inversion of seismograms is to obtain the earth model which, for null initial conditions and given sources, best predicts the observed seismograms. This problem is currently solved by an iterative method: each iteration involves the resolution of the wave equation with the actual sources in the current medium, the resolution of the wave equation, backwards in time, with the current residuals as sources; and the correlation, at each point of space, of the two wavefields thus obtained. Our view of inversion is more general: we want to obtain a whole set of earth model, initial conditions, source functions, and predicted seismograms, which are the closest to some a priori values, and which are related through the wave equation. It allows us to justify the previous method, but it also allows us to set the same inverse problem in a different way: what is now searched for is the best fit between calculated and a priori initial conditions, for given sources and observed surface displacements. This leads to a completely different iterative method, in which each iteration involves the downward extrapolation of given surface displacements and tractions, down to a given depth (the‘bottom’), the upward extrapolation of null displacements and tractions at the bottom, using as sources the initial time conditions of the previous field, and a correlation, at each point of the space, of the two wavefields thus obtained. Besides the theoretical interest of the result, it opens the way to alternative numerical methods of resolution of the inverse problem. If the non-linear inversion using forward-backward time propagations now works, this non-linear inversion using downward-upward extrapolations will give the same results but more economically, because of some tricks which may be used in depth extrapolation (calculation frequency by frequency, inversion of the top layers before the bottom layers, etc.).     

Estimating magnetic dike parameters using a non‐linear constrained inversion technique: an example from the Särna area,west central Sweden

In this paper, we describe a non‐linear constrained inversion technique for 2D interpretation of high resolution magnetic field data along flight lines using a simple dike model. We first estimate the strike direction of a quasi 2D structure based on the eigenvector corresponding to the minimum eigenvalue of the pseudogravity gradient tensor derived from gridded, low‐pass filtered magnetic field anomalies, assuming that the magnetization direction is known. Then the measured magnetic field can be transformed into the strike coordinate system and all magnetic dike parameters – horizontal position, depth to the top, dip angle, width and susceptibility contrast – can be estimated by non‐linear least squares inversion of the high resolution magnetic field data along the flight lines. We use the Levenberg‐Marquardt algorithm together with the trust‐region‐reflective method enabling users to define inequality constraints on model parameters such that the estimated parameters are always in a trust region. Assuming that the maximum of the calculated g_zz (vertical gradient of the pseudogravity field) is approximately located above the causative body, data points enclosed by a window, along the profile, centred at the maximum of g_zz are used in the inversion scheme for estimating the dike parameters. The size of the window is increased until it exceeds a predefined limit. Then the solution corresponding to the minimum data fit error is chosen as the most reliable one. Using synthetic data we study the effect of random noise and interfering sources on the estimated models and we apply our method to a new aeromagnetic data set from the Särna area, west central Sweden including constraints from laboratory measurements on rock samples from the area.     

Continuous wavelet transform,theoretical aspects and application to aeromagnetic data at the Huanghua Depression,Dagang Oilfield,China

We use the continuous wavelet transform based on complex Morlet wavelets, which has been developed to estimate the source distribution of potential fields. For magnetic anomalies of adjacent sources, they always superimpose upon each other in space and wavenumber, making the identification of magnetic sources problematic. Therefore, a scale normalization factor, a^?n, is introduced on the wavelet coefficients to improve resolution in the scalogram. By theoretical modelling, we set up an approximate linear relationship between the pseudo‐wavenumber and source depth. The influences of background field, random noise and magnetization inclination on the continuous wavelet transform of magnetic anomalies are also discussed and compared with the short‐time Fourier transform results. Synthetic examples indicate that the regional trend has little effect on our method, while the influence of random noise is mainly imposed on shallower sources with higher wavenumbers. The source horizontal position will be affected by the change of magnetization direction, whereas the source depth remains unchanged. After discussing the performance of our method by showing the results of various synthetic tests, we use this method on the aeromagnetic data of the Huanghua depression in central China to define the distribution of volcanic rocks. The spectrum slices in different scales are used to determine horizontal positions of volcanic rocks and their source depths are estimated from the modulus maxima of complex coefficients, which is in good accordance with drilling results.     

基于地质体空间位置优化约束的航空重力梯度数据三维物性反演

重力数据的物性反演面临着严重的多解性问题,降低多解性的有效手段是加入约束条件.而边界识别、深度估计及成像方法可获取地质体的水平位置、深度范围等几何参数信息,本文将基于数据本身挖掘的地质体几何参数信息约束到物性反演中,以降低反演的多解性.通过引入基于深度信息的深度加权函数及基于水平位置的水平梯度加权函数建立优化约束条件,有效地提高了反演结果的横向及纵向分辨率.重力梯度数据包含更多的地质体空间特征信息,将优化约束反演方法应用到全张量数据的反演中,模型试验表明本文方法反演结果与理论模型更加吻合.最后对美国路易斯安那州文顿盐丘实测航空重力梯度数据的应用表明,本文方法在其他地球物理、地质资料不足的情况下获得更可靠的反演结果.