Composition and genesis of glacial hummocks, western Wisconsin, USA

Glacial hummocks associated with the Superior Lobe in western Wisconsin are stagnant-ice features composed of melt-out till, meltwater-stream sediment, and flow till. The greater proportion of melt-out till in these hummocks than in hummocks described elsewhere suggests that a model of extensive, supraglacial reworking of supraglacially released debris does not apply to the western Wisconsin hummocks. Interpretation of melt-out till in hummock exposures is based on its strong fabric oriented parallel to regional ice-flow direction. Other features of this melt-out till include poorly developed stratification (color banding and discontinuous thin sandy lenses), and minor faulting, both of which support a melt-out origin. We suggest that as stagnant, debris-rich ice began to melt, supraglacially released debris was deposited as flow till and meltwater-stream sediment (with some debris-flow sediment and lake sediment), but as the thickness of supraglacial debris increased, debris melting out at depth was stabilized, allowing features characteristic of melt-out till to be retained. Because the supraglacial debris was sandy and the stagnant ice was likely at the pressure-melting point, the supraglacial debris was well drained and did not readily fail and flow. Debris volume in the glacier generally was greater at the glacier margin, but lateral and longitudinal variations within this zone were caused by thrusting, freezing-on, or ice-margin fluctuations, which in turn resulted in variations in hummock relief. Ice-walled-lake plains are commonly associated with the hummocks and developed where debris volume was small.     

Genesis of the Sveg tills and Rogen moraines of central Sweden: a model of basal melt out

Shaw, John 1979 1201: Genesis of the Sveg tills and Rogen moraines of central Sweden: a model of basal melt out. Boreas, Vol. 8, pp. 409–426. Oslo. ISSN 0300–9483. Climatic amelioration in permafrozen regions causes basal melting of Polar glaciers. Supraglacial debris concentrated at the ice surface by ablation at first inhibits the ablation process. When the surface debris is equal in thickness to the active layer no further surface melting occurs. Till deposition processes in permafrozen areas are consequently dominated by melt out from a basal isothermal zone at melting point. The basal melt-out process is influenced by englacial structures and forms which are also largely responsible for the resultant landforms and deposits. Such basal melt out may also occur in areas with less severe climate. A model for deposition largely by basal melt out is documented by field observations in central Sweden. Melt-out tills in areas of former extending or uniform glacier flow show an upward facies change corresponding to poorly attenuated and highly attenuated englacial facies. The till facies are recognised in terms of stratigraphic position, surface form, internal structure, and clast lithology, size, shape, and long-axis orientation and dip. Areas of former compressive flow are characterised by basal melt out of folded and dislocated englacial debris zones in which the stacking of debris produced transverse moraine ridges. The internal structure of the ridges includes folded till bodies dislocated by thrust planes, horizontal, stratified layers cross-cutting the tectonic structures, and characteristic distributions of clast long-axis orientation and dip. The morphology of the ridges at both the macro and micro scales is in accord with the proposed model of formation. The morphological and sedimentological associations produced largely by basal melt out are summarized. An additional implication of the proposed model is that gradual lowering of the supraglacial sediment surface by bottom melting of regionally stagnant ice may be the cause of widespread marine or lacustrine transgression.     

Entrainment and emplacement of englacial debris bands near the margin of Storglaciären,Sweden

Internal structure, stable isotope composition and tritium concentration were measured in and around debris‐bearing ice at the margin of Storglaciären, where englacial debris bands have previously been inferred to form by thrusting. Two types of debris bands were distinguished: (i) an unsorted diamicton band that is laterally continuous for more than 200 m, and (ii) well‐sorted sand and gravel bands that are lenticular and discontinuous. Above‐background tritium levels and enrichment of δ¹⁸ O and δD in ice from the diamicton band indicate entrainment by basal freeze‐on since 1952. Isotopic enrichment and tritium‐free ice in the sandy debris bands also indicate entrainment in freezing water, but prior to 1952. The lenticular cross‐section, sorting and stratification of the sandy bands suggest that they were deposited englacially. The basally accreted diamicton band has been elevated tens of metres above the bed and presently overlies the englacially deposited sandy bands, suggesting that the stratigraphy has been disrupted. Three interpretations could account for these observations: (i) thrusting of fast‐moving ice over slow, marginal ice uplifting recently accreted basal ice along the fault; (ii) folding near the margin, elevating young basal ice over older basal and englacial ice; and (iii) debris‐band formation by an unknown mechanism and subsequent contamination of ice geochemical properties by meltwater flow through debris bands. Although none of these interpretations is consistent with all measurements, folding is most compatible with observations and local ice‐flow kinematics.     

A multiproxy study of a basal till: a time‐transgressive accretion and deformation hypothesis

A two‐part basal till at Knud Strand, Denmark reveals a uniform fabric pattern and strength, petrographical composition and clay mineralogy. The nature of the contact with the underlying sediments, ductile deformation structures, partly intact soft sediment clasts, small meltwater channels and thin horizontal outwash stringers dispersed in the till indicate both bed deformation and basal decoupling by pressurised subglacial water. A time‐transgressive model is suggested to explain the lack of vertical gradation in till properties in which debris released from the active ice sole is sheared in a thin zone moving upward as till accretion proceeds. It is suggested that, although strain indicators occur throughout the entire till thickness, the deformation at any point of time encompassed the uppermost part of the till only, allowing preservation of fragile clasts below. The substantial thickness of the till (up to 6 m) coupled with a much smaller (by more than one order of magnitude) inferred thickness of the deforming bed suggests that the bulk of till material was transported englacially prior to deposition. The lack of petrographical gradation in the till is attributed to effective mixing and homogenisation of material along the ice flow path. Copyright © 2004 John Wiley & Sons, Ltd.     

Sedimentology and depositional environments of the Lund Diamicton, southern Sweden

The Lund Diamicton (earlier named Lund Till) in SW Skåne, S. Sweden, is a glacioaquatic sediment consisting of clay and massive and laminated diamictons. It is characterized by clasts derived from the Baltic depression and its depositional history can be summarized as follows: After deglaciation, large fields of stagnant ice remained in the area and a periglacial land surface with ice-wedge polygons and wind-abraded clasts was developed in ice-free areas. A transgression followed and a clay/diamicton sediment was deposited, partly on top of stagnant ice and against a coastal barrier of stagnant ice along large parts of the basin boundary. This sediment is the Lund Diamicton. The main depositional processes were: fall-out of clay from suspension, sediment gravity flow from stagnant ice and icebergs and rain-out of debris from floating icebergs. The unit was extensively deformed by escaping pore water, loading, flow and due to melting of buried ice. The Lund Diamicton is the equivalent in this area of the classical 'Low Baltic till', which has been interpreted as a basal till deposited by the 'Low Baltic ice stream'. The present study concludes that this unit is instead a glacioaquatic sediment deposited during a transgression in the Öresund area. Its boundary represents the highest coastline and not the margin of a glacier.     

A shear-diffusion model of till genesis based on the dispersal pattern of indicator rocks in the Grand-Volume Till of central Gaspésie, Québec, Canada

Dispersal patterns of indicator rocks in central Gaspésie reveal that glacial debris is entrained in a basal debris-rich zone of shearing where clast diffusion takes place. The Grand-Volume Till forms a thin till sheet over the high plateaus of Gaspésie Peninsula and resulted from a succession of two Wisconsinan ice flows of distinct orientations (SSE and NE). The lithological composition of this till determined by pebble counts and the three-dimensional dispersal patterns of indicator rocks in it suggest that debris transport occurred principally by simple shear deformation of glacial debris. In addition, the intermixing of clasts at the intersection of two lithologically distinct dispersal trains of SSE and NE orientations, respectively, suggests that extensive mixing takes place during shearing. Physical interactions among the clasts lead to both upward and downward movements which cause the clasts to diffuse across the zone of shearing. This process of shear-diffusion results in continuous incorporation and mixing of the newly encountered rock types during glacial transport.     

Neoglacial (<3000 years) till and flutes at Saskatchewan Glacier,Canadian Rocky Mountains,formed by subglacial deformation of a soft bed

Understanding the processes that deposit till below modern glaciers provides fundamental information for interpreting ancient subglacial deposits. A process‐deposit‐landform model is developed for the till bed of Saskatchewan Glacier in the Canadian Rocky Mountains. The glacier is predominantly hard bedded in its upper reaches and flows through a deep valley carved into resistant Palaeozoic carbonates but the ice margin rests on a thick (<6 m) soft bed of silt‐rich deformation till that has been exposed as the glacier retreats from its Little Ice Age limit reached in 1854. In situ tree stumps rooted in a palaeosol under the till are dated between ca 2900 and 2700 yr bp and record initial glacier expansion during the Neoglacial. Sedimentological and stratigraphic observations underscore the importance of subglacial deformation of glaciofluvial outwash deposited in front of the advancing glacier and mixing with glaciolacustrine carbonate‐rich silt to form a soft bed. The exposed till plain has a rolling drumlinoid topography inherited from overridden end moraines and is corrugated by more than 400 longitudinal flute ridges which record deformation of the soft bed and fall into three genetically related types: those developed in propagating incipient cavities in the lee of large subglacial boulders embedded in deformation till, and those lacking any originating boulder and formed by pressing of wet till up into radial crevasses under stagnant ice. A third type consists of U‐shaped flutes akin to barchan dunes; these wrap around large boulders at the downglacier ends of longitudinal scours formed by the bulldozing of boulders by the ice front during brief winter readvances across soft till. Pervasive subglacial deformation during glacier expansion was probably facilitated by large boulders rotating within the soft bed (‘glacioturbation’).     

An anisotropy of magnetic susceptibility (AMS) fabric record of till kinematics within a Late Weichselian low Baltic till,southern Sweden

Herein we report on the results of an anisotropy of magnetic susceptibility (AMS) fabric case‐study of two Late Weichselian tills exposed in a bedrock quarry in Dalby, Skåne, southern Sweden. The region possesses a complex glacial history, reflecting alternating and interacting advances of the main body of the Scandinavian Ice Sheet (SIS) and its ice lobes from the Baltic basin, perhaps driven by streaming ice. AMS till fabrics are robust indicators of ice‐flow history and till kinematics, and provide a unique tool to investigate till kinematics within and amongst till units. The till section investigated here contains ~8 m of the Dalby Till – a dark grey silt‐clay rich till deposited during one or more Baltic advance – overlain by ~1.5 m of the regional surface diamicton. AMS fabrics within the lower part of the Dalby Till conform to the regional surface fluting, and reflect sustained flow from the ENE with progressive increases in basal strain. A boulder‐rich horizon approximately 3 m from the base of the till marks a restricted excursion in till fabric direction, fabric strength and style of strain. Ice flow is from the SW and W in the upper section. We interpret these fabrics to record shifting ice flow and bed conditions at the margins of the Young Baltic Advance ice lobe in southern Sweden, prior to a short‐lived re‐advance of the main body of the SIS over mainland Sweden recorded by the surface diamicton.     

Successive subglacial depositional processes as interpreted from basal tills in the Lower Vistula valley (N Poland)

Three basal-till facies from the Lower Vistula valley were examined. The lowest facies, a sandy diamicton with characteristic sand inclusions forming detached and attenuated folds, is overlain by a bedded till characterized by alternating diamictons and sorted sediment layers. The uppermost till facies is a homogeneous diamicton.The three till facies must have been formed by complex subglacial sedimentary processes during the first Late Weichselian ice advance. The lowest till facies is interpreted as a deformation till, and accumulated during the initial stage of the ice advance. The middle facies represents a stagnation phase during the initial ice advance, and was deposited during recurrent periods of subglacial melt-out followed by meltwater sedimentation. The upper till facies was deposited by direct subglacial melt-out during a stage of stagnant ice.It is suggested that bed deformation and temporarily enhanced basal sliding have been caused by ice streaming at the time of the ice-sheet advance and just before its stagnation.     

The Bølling‐age Blomvåg Beds,western Norway: implications for the Older Dryas glacial re‐advance and the age of the deglaciation

Blomvåg, on the western coast of Norway north of Bergen, is a classical site in Norwegian Quaternary science. Foreshore marine sediments, named the Blomvåg Beds and now dated to the Bølling‐Allerød from 14.8 to 13.3 cal. ka BP, contain the richest Lateglacial bone fauna in Norway, numerous mollusc shells, driftwood, and flint that some archaeologists consider as the oldest traces of humans in Norway. The main theme of this paper is that the Blomvåg Beds are overlain by a compact diamicton, named the Ulvøy Diamicton, which was interpreted previously as a basal till deposited during a glacial re‐advance into the ocean during the Older Dryas (c. 14 cal. ka BP). Sediment sections of the Blomvåg Beds and the Ulvøy Diamicton were exposed in ditches in a cemetery that was constructed in 1941–42 and have subsequently not been accessible. A number of radiocarbon and cosmogenic ¹⁰Be exposure ages demonstrate that the diamicton is not likely to be a till because minimum deglaciation ages (14.8–14.5 cal. ka BP) from the vicinity pre‐date the Ulvøy Diamicton. We now consider that sea ice and icebergs formed the Ulvøy Diamicton during the Younger Dryas. The Scandinavian Ice Sheet margin was located on the outermost coastal islands between at least c. 18.5 and 14.8 cal. ka BP; however, no ice‐marginal deposits have been found offshore from this long period. The Older Dryas ice margin in this area was located slightly inside the Younger Dryas margin, whereas farther south it was located slightly beyond the Younger Dryas margin.     

Insights into subglacial processes inferred from the micromorphological analyses of complex diamicton stratigraphy near Illmensee‐Lichtenegg,Höchsten,Germany

Menzies, J. & Ellwanger, D. 2010: Insights into subglacial processes inferred from the micromorphological analyses of complex diamicton stratigraphy near Illmensee‐Lichtenegg, Höchsten, Germany. Boreas, 10.1111/j.1502‐3885.2010.00194.x. ISSN 0300‐9483. Investigations of a 30‐m‐high section of Pleistocene sediments at Illmensee‐Lichtenegg, Höchsten in Baden‐Württemberg provide detailed information on subglacial conditions beneath the Rhine Glacier outlet of the Alpine ice sheet in southern Germany. The sediment exposure extends from an upper cemented sand and gravel (Deckenschotter) into diamictic units that extend down to weathered Molasse bedrock. The exposure reveals sediments symptomatic of active syndepositional stress/strain processes ongoing beneath the ice sheet. Macrosedimentology reveals diamicton subfacies units and a strong uni‐direction of ice motion based on clast fabric analyses. At the microscale level, thin‐section analyses provide a substantially clearer picture of the dynamics of subglacial sediment deformation and till emplacement. Evidence based on detailed micromorphological analyses reveals microstructural strain and depositional markers that indicate a subglacial environment of ongoing soft bed deformation in which the diamictons can be readily identified as subglacial tills. Within this subglacial environment, distinct changes in pore‐water pressure and sediment rheology can be detected. These changes reveal fluctuating conditions of progressive, non‐pervasive deformation associated with rapid changes in effective stress and shear strain leading to till emplacement. This site, through the application of micromorphology, increases our understanding of localized subglacial conditions and till formation.     

Subglacial processes and drumlin formation in a confined bedrock valley,northwest Ireland

Knight, J. 2010: Subglacial processes and drumlin formation in a confined bedrock valley, northwest Ireland. Boreas, 10.1111/j.1502‐3885.2010.00182.x. ISSN 0300‐9483. Subglacial processes beneath the Late Weichselian ice sheet in northwest Ireland are deduced from sediments and structures within drumlins in a bedrock valley at Loughros Beg, County Donegal. Here, a glacially smoothed bedrock surface underlies the drumlins, which are composed on their up‐ice side of stacked, angular rafts of local bedrock. Overlying and down‐ice from these rafts are down‐ice‐dipping beds of massive to bedded diamicton that contain sand and gravel interbeds. In a down‐ice direction the diamicton matrix coarsens and the beds become laterally transitional to water‐sorted gravels. The down‐ice end of one drumlin shows a concentrically bedded stratified gravel core aligned parallel to ice flow and resembling the internal structure of an esker. With distance away from this core, the gravels become more poorly sorted with an increase in matrix content, and are transitional to massive to stratified diamicton. A four‐stage model describes the formation of drumlins in this sediment‐poor setting. The sediments that are located directly above the bedrock represent deposition in a semi‐enclosed subglacial cavity. A trigger for this process was the formation of subglacial relief by the thrusting up of bedrock rafts, which created the leeside cavity. Subsequent sediment deposition into this cavity represents a form of feedback (self‐regulation), which may be a typical characteristic of subglacial processes in sediment‐poor settings.     

Sediment production and transport in a proglacial stream: Hilda Glacier, Alberta, Canada

Hilda Glacier, a small cirque glacier in the Canadian Rocky Mountains, yields two principal types of sediment: ablation till, deficient in fine material and produced by rockfalls and avalanches falling on to the glacier surface, and basal lodgement till, rich in fines and formed mainly by subglacial erosion. Recent recession from its Neoglacial maximum has exposed large areas of basal till with thin veneers of ablation till which, when combined with present subglacial and supraglacial debris, provide abundant material for erosion and transport by the mcltwatcr stream. Sediment transport measurements over two summers (1977–1978) showed that bed load and suspended load occur in approximately equal proportions and that dissolved loads are minor. Local source variations, especially bank slumps, are a major cause of scatter in sediment rating curves. Suspended-sediment concentrations are greater early in the melt season due to availability of loose sediment produced by freezing and thawing. Other contributors to scatter in suspended-sediment rating curves include rain showers and diurnal hysteretic effects. Although the distinction between bed load and suspended load is never sharp, available data suggest that the sand/ gravel grain-size boundary (-1ø) approximates the suspendcd-load/bed-load division for characteristic Hilda flows transporting gravel. This approximation, combined with till grain-size analyses, suspended-sediment measurements, and spatial distributions of till types, leads to the following computations of fluvial sediment sources: for suspended load - 6% supraglacial, 47% subglacial, 47% channel banks; for bed load - 46% supraglacial, 27% each subglacial and channel banks. Supraglacial debris provides only about one-fourth of all fluvial sediment, but nearly half of the bed load.     

Thermokarst-lake-basin sediments, Tuktoyaktuk Coastlands, western arctic Canada

Three stages of deposition are distinguished in thermokarst-lake-basin sequences in ice-rich permafrost of the Tuktoyaktuk Coastlands, western arctic Canada: (1) widespread retrogressive thaw slumping around lake margins that rapidly transports upland sediments into thermokarst lakes, forming a distinctive basal unit of impure sand and/or diamicton; (2) a reduction or cessation of slumping-because of the pinching out of adjacent ground ice, slump stabilization or climatic cooling, that reduces the input of clastic sediment, permitting reworking of sediment around lake margins and suspension settling, principally in basin centres; (3) lakes drain and deposition may continue by gelifluction and accumulation of in situ peat or aeolian sand. Radiocarbon dating of detrital peat and wood from a progradational sequence (basal unit) defines a lateral younging trend in the direction of progradation. A progradation rate is calculated to be ～ 4 cm yr^?1, consistent with rapid deposition during stage (1) above. The nonuniform nature of the trend is attributed to episodic influxes of old organic material by slumping and reworking by waves and currents. In comparison with thermokarst-lake-basin sequences previously described in Alaska, Canada and Siberia, the middle unit of those in the Tuktoyaktuk Coastlands is similar, whereas the basal unit is generally thicker and, by contrast, often contains diamicton. These differences are attributed, respectively, to larger-scale resedimentation of upland sediments by retrogressive thaw slumping and debris-flow deposition in thermokarst lakes in the Tuktoyaktuk Coastlands. Compared with the sediments within supraglacial lakes in areas of moderate to high relief, the middle unit of thermokarst-lake-basin sequences in the Tuktoyaktuk Coastlands lacks clastic varves and the basal unit is much thinner and texturally less variable. These differences are attributed to higher relief and larger volumes of meltwater and glacigenic sediment in supraglacial lakes, which promote more suspension settling and resedimentation of glacigenic sediment than in thermokarst lakes in the Tuktoyaktuk Coastlands. It may be impossible to distinguish glacial and periglacial thermokarst-lake-basin sediments in permafrost areas of incomplete deglaciation. Not only is it often difficult to distinguish intrasedimental and buried glacier ice, but the depositional processes associated with thaw of both ice types are presumably the same and the host sediments very similar.     

Sand intraclasts within a diamicton mélange,southern Niagara Peninsula,Ontario, Canada

Sand intraclasts found within diamicton units along the north shore of Lake Erie in the Mohawk Bay area of the Niagara Peninsula would appear to be part of a ‘block-in-matrix’ mélange. The intraclasts are undeformed and many exhibit primary bedding structures. Numerous intraclasts have been rotated and/or tilted and are, in general, subrounded in outline. Examination of the surrounding diamicton reveals that the diamicton clast fabrics exhibit a wide scatter and are not characteristic of any known till clast fabric. Around each intraclast exists an aureole of brecciated diamicton. Other evidence in the form of macro- and microshear structures, and banding within the diamicton indicate that the diamicton has been subject to high strain. Interpretation of the sand intraclasts seems to be intrinsically linked to the origin of the diamicton and together linked to the origin of the mélange. Various hypotheses are suggested separately for the sand intraclasts, diamicton and mélange. A subglacial deformable bed hypothesis is advanced as the most acceptable explanation for the complete sediment sequence in which diamicton and frozen sand intraclasts, the latter mobilised from the substrate, are moved as a mélange below an active fast-moving ice mass. Several implications from this study emerge with regard to glacial sedimentology and stratigraphic interpretations.     

Topography and melting dynamics of ice‐cored ridges: evidence from the geometry,kinematics and sedimentary evolution of collapse structures within kame deposits,eastern Poland

In earlier studies, the topography and melting dynamics of ice‐cored ridges within marginal zones of the Pleistocene ice sheets were routinely reconstructed based only on conceptual and qualitative models supported by geomorphological, sedimentological and palaeogeographical studies. Here, a novel approach based on detailed structural analysis of two collapse structures affecting Pleistocene kame deposits is presented. The high regularity of the geometry of synclines and related strain fields as well as the patterns of subsidence of the folded strata are all interpreted as evidence of topography of ice‐cored ridges and their melting dynamics. The topography is described in terms of elongation, orientation and cross‐sectional shape of ice‐cored ridges. In turn, the melting dynamics are assessed based on a semi‐quantitative model of different relative rates of backwasting and downwasting. The topography of ice‐cored ridges, derived independently from the morphology of the related supraglacial landforms, is interpreted as an effect of ablation controlled by debris bands within parent ice. The reconstructed ice‐cored ridges are considered to represent the second‐order topographic features within a wide ice‐cored depression. The sedimentary evolution of collapse structures expressed as migration of their hinges/depocentres provides new semi‐quantitative insight into melting dynamics of ice showing the predominance of backwasting over downwasting. This evolution concerns the final stage of de‐icing, which was probably preceded by lowering of the ice‐cored topography and progressive formation of the ice‐cored ridges.     

山地冰川沉积相模式与特征

山地冰川沉积研究在中国有特殊重要性。因为欧、美对冰碛沉积研究多限于大陆冰盖,沉积环境比较单纯,冰水沉积比重很大,而中国山地冰川多限于山体内部,冰水沉积极不发育,且沉积环境很复杂,亚相变化也大。此外中国山地冰川多属大陆性,与欧、美海洋性冰川在物理性质和沉积特征上都有不同。如冰川磨蚀作用弱,冰碛中粉砂少,冰上融出碛发育而流碛和滞碛不发育,原生(同生)构造如粗糙斜层很发育等。这些都将丰富冰碛沉积学内容,并对科学地鉴别中国东部各种混杂堆积的成因有重要意义。如据现代冰川沉积指标庐山就没有任何冰川堆积。     

Sequence of till deposition and erosion in drumlins

Whittecar, G.R. & Mickelson, D. M. 1977 06 01: Sequence of till deposition and erosion in drumlins.
Extensive sand and gravel workings have exposed structural and compositional features of 17 gravel-cored drumlins of late Wisconsin age in eastern Wisconsin. The drumlins are blanketed by 3 m of sandy basal till which truncates lower tills of earlier advanccs, outwash gravels, and an overlying till which is conformable to the gravel bedding and indistinguishable in composition from the surface till. Sands and gravels in the interior of some drumlins are deformed into large overturned folds, and into elastic dikes of fine sand and silt which penetrate to the top of the drumlin and warp overlying gravels. Both the folds and horizontal bedding are truncated by either the drumlin edge or the till blanket.
We interpret the conformable, truncated, and in some cases folded, till as a basal till deposited during glacial advance. The capping, truncating till is viewed as a basal till left by retreating ice.
The following sequence of events is suggested: (1) advance of ice over outwash, and deposition of till in a zone mar the margin; (2) thickening of the ice and erosion of the drumlin shapes; (3) local folding of the gravels and continued erosion; (4) retreat of ice and deposition of basal till under thin ice; (5) deposition of localized ablation till and stratified deposits.     

Weichselian sediments at Foss‐Eikeland,Jæren (southwest Norway): sea‐level changes and glaciation history

The Jæren area in southwestern Norway has experienced great changes in sea‐levels and sedimentary environments during the Weichselian, and some of these changes are recorded at Foss‐Eikeland. Four diamictons interbedded with glaciomarine and glaciofluvial sediments are exposed in a large gravel pit situated above the post‐glacial marine limit. The interpretation of these sediments has implications for the history of both the inland ice and the Norwegian Channel Ice Stream. During a Middle Weichselian interstadial, a large glaciofluvial delta prograded into a shallow marine environment along the coast of Jæren. A minor glacial advance deposited a gravelly diamicton, and a glaciomarine diamicton was deposited during a following marine transgression. This subsequently was reworked by grounded ice, forming a well‐defined boulder pavement. The boulder pavement is followed by glaciomarine clay with a lower, laminated part and an upper part of sandy clay. The laminated clay probably was deposited under sea‐ice, whereas more open glaciomarine conditions prevailed during deposition of the upper part. The clay is intersected by clastic dykes protruding from the overlying, late Weichselian till. Preconsolidation values from the marine clay suggest an ice thickness of at least 500 m during the last glacial phase. The large variations in sea‐level probably are a combined effect of eustasy and glacio‐isostatic changes caused by an inland ice sheet and an ice stream in the Norwegian Channel. Copyright © 2002 John Wiley & Sons, Ltd.     

Formation of a stratified subglacial ‘till’ assemblage by ice‐marginal thrusting and glacier overriding

Ó Cofaigh, C., Evans, D. J. A. & Hiemstra, J. F. 2010: Formation of a stratified subglacial ‘till’ assemblage by ice‐marginal thrusting and glacier overriding. Boreas, 10.1111/j.1502‐3885.2010.00177.x. ISSN 0300‐9483. A thick sequence of glaciotectonically stacked till and outwash is preserved in a coastal embayment at Feohanagh, southwest Ireland. The sequence contains a variety of diamicton lithofacies, including laminated, stratified and massive components, but stratified diamictons dominate. Stratification/lamination is imparted by the presence of numerous closely spaced subhorizontal and anastomosing partings, which give a fissile appearance to the diamictons. Many partings are the result of sandy or thin gravelly layers within the diamictons. Some diamictons contain interbeds and lenses of sand, mud and gravel, which still preserve the original stratification. The sequence at Feohanagh is the product of a two‐stage depositional process in which initial glaciolacustrine sedimentation in an ice‐dammed lake was followed by glaciotectonic thrusting and overriding, during which the lake sediments were reworked and variably deformed. Similar late Quaternary sequences of glaciotectonically stacked stratified sediments and till have been described from around the coastal margins of Ireland and Britain, where they constitute glaciotectonite–subglacial traction till continuums rather than true lodgement tills as traditionally implied. Thick stratified diamicton assemblages are likely to occur in areas where steep topography provides pinning points for the glacier margin to stabilize and deliver large volumes of sediment into a glaciolacustrine or glaciomarine setting before proglacial and subglacial reworking of the sediment pile. The resulting geological–climatic unit, often defined as ‘till’, will contain a large amount of stratified and variably deformed material (laminated and stratified diamictons will be common), including intact sediment rafts, reflecting low strain rates and short sediment transport distances.