Evidence of weathering stages of phyllosilicates from biotite/muscovite to kaolinite, probed by EPR spectroscopy

We report on a paramagnetic anisotropy study of three layered phyllosilicates. The mineral samples were characterized through X-ray powder diffraction (XRPD), X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR). Based on EPR measurements of samples oriented parallel or perpendicular to the magnetic field lines, we show how the substitutional iron is transformed from Fe(II) (biotite) into Fe(III) (muscovite and kaolinite) species and from axial Fe(III) coordination sites (muscovite) to rhombic (kaolinite) sites in response to weathering.     

Surface chemistry and structural properties of mackinawite prepared by reaction of sulfide ions with metallic iron

Tetragonal FeS_1−x mackinawite, has been synthesized by reacting metallic iron with a sodium sulfide solution and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), transmission Mössbauer spectroscopy (TMS) and X-ray photoelectron spectroscopy (XPS). Based on XRD and TEM analyses, synthetic mackinawite exhibits crystallization and is identical to the natural mineral. Unit cell parameters derived from XRD data are a = b = 0.3670 nm and c = 0.5049 nm. The bulk Fe:S ratio derived from the quantitative dispersive energy analysis is practically 1. XPS analyses, however, showed that mackinawite surface is composed of both Fe(II) and Fe(III) species bound to monosulfide. Accordingly, monosulfide is the dominant S species observed at the surface with lesser amount of polysulfides and elemental sulfur. TMS analysis revealed the presence of both Fe(II) and Fe(III) in the mackinawite structure, thus supporting the XPS analysis. We propose that the iron monosulfide phase synthesized by reacting metallic iron and dissolved sulfide is composed of Fe(II) and S(-II) atoms with the presence of a weathered thin layer covering the bulk material that consists of both Fe(II) and Fe(III) bound to S(-II) atoms and in a less extent of polysulfide and elemental sulfur.     

Progressive oxidation of pyrite in five bituminous coal samples: An As XANES and Fe Mössbauer spectroscopic study

Naturally occurring pyrite commonly contains minor substituted metals and metalloids (As, Se, Hg, Cu, Ni, etc.) that can be released to the environment as a result of its weathering. Arsenic, often the most abundant minor constituent in pyrite, is a sensitive monitor of progressive pyrite oxidation in coal. To test the effect of pyrite composition and environmental parameters on the rate and extent of pyrite oxidation in coal, splits of five bituminous coal samples having differing amounts of pyrite and extents of As substitution in the pyrite, were exposed to a range of simulated weathering conditions over a period of 17 months. Samples investigated include a Springfield coal from Indiana (whole coal pyritic S = 2.13 wt.%; As in pyrite = detection limit (d.l.) to 0.06 wt.%), two Pittsburgh coal samples from West Virginia (pyritic S = 1.32–1.58 wt.%; As in pyrite = d.l. to 0.34 wt.%), and two samples from the Warrior Basin, Alabama (pyritic S = 0.26–0.27 wt.%; As in pyrite = d.l. to 2.72 wt.%). Samples were collected from active mine faces, and expected differences in the concentration of As in pyrite were confirmed by electron microprobe analysis. Experimental weathering conditions in test chambers were maintained as follows: (1) dry Ar atmosphere; (2) dry O₂ atmosphere; (3) room atmosphere (relative humidity ∼20–60%); and (4) room atmosphere with samples wetted periodically with double-distilled water. Sample splits were removed after one month, nine months, and 17 months to monitor the extent of As and Fe oxidation using As X-ray absorption near-edge structure (XANES) spectroscopy and ⁵⁷Fe Mössbauer spectroscopy, respectively. Arsenic XANES spectroscopy shows progressive oxidation of pyritic As to arsenate, with wetted samples showing the most rapid oxidation. ⁵⁷Fe Mössbauer spectroscopy also shows a much greater proportion of Fe³⁺ forms (jarosite, Fe³⁺ sulfate, FeOOH) for samples stored under wet conditions, but much less difference among samples stored under dry conditions in different atmospheres. The air-wet experiments show evidence of pyrite re-precipitation from soluble ferric sulfates, with As retention in the jarosite phase. Extents of As and Fe oxidation were similar for samples having differing As substitution in pyrite, suggesting that environmental conditions outweigh the composition and amount of pyrite as factors influencing the oxidation rate of Fe sulfides in coal.     

Equilibrium iron isotope fractionation factors of minerals: Reevaluation from the data of nuclear inelastic resonant X-ray scattering and Mössbauer spectroscopy

We have critically reevaluated equilibrium iron isotope fractionation factors for oxide and sulfide minerals using recently acquired data obtained by Mössbauer spectroscopy and inelastic nuclear resonant X-ray scattering (INRXS) synchrotron radiation. Good agreement was observed in the iron β-factors of metallic iron (α-Fe) and hematite calculated using both Mössbauer- and INRXS-derived data, which supports the validity and reliability of the calculations. Based on this excellent agreement, we suggest the use of the present data on the iron β-factors of hematite as a reference.The previous Mössbauer-derived iron β-factor for magnetite has been modified significantly based on the Fe-sublattice density of states obtained from the INRXS experiments. This resolves the disagreement between naturally observed iron isotope fractionation factors for mineral pairs involving magnetite and those obtained from the calculated β-factors. The correctness of iron β-factor for pyrite has been corroborated by the good agreement with experimental data of sulfur isotope geothermometers of pyrite-galena and pyrite-sphalerite. A good correlation between the potential energy of the cation site, the oxidation state of iron and the iron β-factor value has been established. Specifically, ferric compounds, which have a higher potential energy of iron than ferrous compounds, have higher β-factors. A similar dependence of β-factors on the oxidation state and potential energy could be extended to other transition metals. Extremely low values of INRXS-derived iron β-factors for troilite and Fe₃S significantly widen the range of iron β-factors for covalently bonded compounds.     

Pristine and reacted surfaces of pyrrhotite and arsenopyrite as studied by X-ray absorption near-edge structure spectroscopy

Fe L-, S L-, and O K-edge X-ray absorption spectra of natural monoclinic and hexagonal pyrrhotites, Fe_1-xS, and arsenopyrite, FeAsS, have been measured and compared with the spectra of minerals oxidized in air and treated in aqueous acidic solutions, as well as with the previous XPS studies. The Fe L-edge X-ray absorption near-edge structure (XANES) of vacuum-cleaved pyrrhotites showed the presence of, aside from high-spin Fe²⁺, small quantity of Fe³⁺, which was higher for a monoclinic mineral. The spectra of the essentially metal-depleted surfaces produced by the non-oxidative and oxidative acidic leaching of pyrrhotites exhibit substantially enhanced contributions of Fe³⁺ and a form of high-spin Fe²⁺ with the energy of the 3d orbitals increased by 0.3–0.8 eV; low-spin Fe²⁺ was not confidently distinguished, owing probably to its rapid oxidation. The changes in the S L-edge spectra reflect the emergence of Fe³⁺ and reduced density of S s–Fe 4s antibonding states. The Fe L-edge XANES of arsenopyrite shows almost unsplit e_g band of singlet Fe²⁺ along with minor contributions attributable to high-spin Fe²⁺ and Fe³⁺. Iron retains the low-spin state in the sulphur-excessive layer formed by the oxidative leaching in 0.4 M ferric chloride and ferric sulphate acidic solutions. The S L-edge XANES of arsenopyrite leached in the ferric chloride, but not ferric sulphate, solution has considerably decreased pre-edge maxima, indicating the lesser admixture of S s states to Fe 3d orbitals in the reacted surface layer. The ferric nitrate treatment produces Fe³⁺ species and sulphur in oxidation state between +2 and +4.     

Mineralogical confirmation of a near-P:Fe = 1:2 limiting stoichiometric ratio in colloidal P-bearing ferrihydrite-like hydrous ferric oxide

We present a chemical and mineralogical explanation, derived from powder X-ray diffraction and Mössbauer spectroscopy measurements of synthetic samples, of the P:Fe = 1:2 limiting ratio of P incorporation (as PO₄) that was previously observed in natural aquatic oxic iron precipitates. The ⁵⁷Fe Mössbauer hyperfine parameters are interpreted with the help of state-of-the-art ab initio electronic structure calculations. We find that there is a strong tendency for solid solution P-Fe mixing in the P-bearing hydrous ferric oxide (P-HFO) aqueous coprecipitate system, interpreted as occurring between the P-free (ferrihydrite) end-member and an inferred P:Fe = 1:2 end-member beyond which P is not incorporated in the structure of the P-HFO solid. Up to and somewhat beyond the limiting end-member P:Fe ratio, all available P is scavenged by the coprecipitation reaction, suggesting strong P-Fe complexation in the precipitation-precursor dissolved species. The P-HFO solids are more stable (i.e., have stronger chemical bonds) than the P-free ferrihydrite end-member. We show that in coprecipitation the P specifically incorporates within the nanoparticle structure rather than complexing to the nanoparticle surface. Our results are relevant to the question of the mechanisms of coupling between the Fe and P cycles in natural aqueous environments and highlight a strong affinity between Fe and P in aqueous environments.     

Multiproxy analysis of a new terrestrial and a marine Cretaceous-Paleogene (K-Pg) boundary site from New Zealand

An integrated study of palynology, Mössbauer spectroscopy, mineralogy and osmium isotopes has led to the detection of the first K-Pg boundary clay layer in a Southern Hemisphere terrestrial setting. The K-Pg boundary layer was independently identified at centimetre resolution by all the above mentioned methods at the marine K-Pg boundary site of mid-Waipara and the terrestrial site of Compressor Creek (Greymouth coal field), New Zealand. Mössbauer spectroscopy shows an anomaly of Fe-containing particles in both K-Pg boundary sections: jarosite at mid-Waipara and goethite at Compressor Creek. This anomaly coincides with a turnover in vegetation indicated by an interval dominated by fern spores and extinction of key pollen species in both sections. In addition to the terrestrial floristic changes, the mid-Waipara section reveals a turnover in the dinoflagellate assemblages and the appearance of global earliest Danian index species. Geochemical data reveal relatively small iridium enrichments in the boundary layers of 321 pg/g at mid-Waipara and 176 pg/g at Compressor Creek. Unradiogenic ¹⁸⁷Os/¹⁸⁸Os values of the boundary clay reveal the presence of a significant extraterrestrial component. We interpret the accumulation of Fe nano-phases at the boundary as originating from both the impactor and the crystalline basement target rock. The goethite and jarosite are interpreted as secondary phases formed by weathering and diagenesis. The primary phases were probably controlled by the initial composition of the vapor plume and condensation kinetics rather than condensation thermodynamics. This investigation indicates that identification of Fe in nano-phases by Mössbauer spectroscopy is an accurate and cost-effective method for identifying impact event horizons and it efficiently complements widely used biostratigraphic and geochemical methods.     

Revealing forms of iron in river-borne material from major tropical rivers of the Amazon Basin (Brazil)

The present study deals with the direct determination of colloidal forms of iron in river-borne solids from main rivers of the Amazon Basin. The contribution of different forms of colloidal iron have been assessed using ultrafiltration associated with various techniques including electron paramagnetic resonance spectroscopy (EPR), high resolution transmission electron microscopy (HRTEM), and micro proton-induced X ray emission analysis (μPIXE). EPR shows the presence of Fe³⁺ bound to organic matter (Fe³⁺-OM) and colloidal iron oxides. Quantitative estimate of Fe³⁺-OM content in colloidal matter ranges from 0.1 to 1.6 weight % of dried solids and decreases as the pH of the river increases in the range 4 to 6.8. The modeling of the field data with the Equilibrium Calculation of Speciation and Transport (ECOSAT) code demonstrates that this trend is indicative of a geochemical control resulting from the solubility equilibrium of Fe oxyhydroxide phase and Fe binding to organic matter. Combining EPR and μPIXE data quantitatively confirms the presence of colloidal iron phase (min. 35 to 65% of iron content), assuming no divalent Fe is present. In the Rio Negro, HRTEM specifies the nature of colloidal iron phase mainly as ferrihydrite particles of circa 20 to 50 Å associated with organic matter. The geochemical forms of colloidal iron differentiate the pedoclimatic regions drained by the different rivers, corresponding to different major weathering/erosion processes. Modeling allows the calculation of the speciation of iron as mineral, organic and dissolved phases in the studied rivers.     

Iron oxidation state of a 2.45-Byr-old paleosol developed on mafic volcanics

The 2.45-Byr-old weathering profile developed on early Proterozoic mafic volcanics located near Cooper Lake, Ontario, Canada, was examined geochemically and mineralogically for a better understanding of the atmospheric oxygen evolution. Ferrous to ferric ion, Fe(II) and Fe(III), respectively, ratios of the bulk rock samples were analyzed by Mössbauer spectrometry. The total Fe (Fe(T)) and Fe(II) concentrations decrease from 12.0 and 11.2 wt.% to 1.85 and 0.89 wt.%, respectively, from the bottom to the top of the weathering profile. The Fe(T) and Fe(II) concentrations normalized to Ti and Zr, as well as the Fe(II)/Fe(III) ratio of raw data, linearly decrease with depth toward the top, while the Fe(III) concentration remains nearly constant throughout the profile. The linear decrease of Fe(II), accompanied by the nearly constant distribution of Fe(III), is difficult to be explained by the scenario of oxidizing weathering and subsequent reducing hydrothermal alteration. The behaviors of Fe(II) and Fe(III) can be simply explained by anoxic weathering. The anoxic weathering suggests that the 2.45-Ga atmosphere was anoxic. The slight increase of Fe/(Fe+Mg) in the octahedral sites of chlorite toward the top and no Ce anomaly in the REE patterns are also consistent with anoxic weathering.     

Determination of Fe3+ and Fe2+ concentrations in feldspar by optical absorption and EPR spectroscopy

Ferrous and ferric iron concentrations in feldspars with low total iron content (<0.32 wt% total Fe) were determined from optical and electron paramagnetic resonance (EPR) spectra to better than ±15 percent of the amount present. Optical spectra indicate that Fe²⁺ occupies two distorted M-sites in plagioclases of intermediate structural state. The linear dependence of the Fe²⁺/Fe total ratio on An content demonstrates that Fe²⁺ substitutes for Ca (not Na) so that the number of Ca-sites is a principal factor in iron partitioning in plagioclase. EPR powder spectra show that the number of sites for Fe³⁺ depends on structural state rather than on plagioclase chemistry. The observed linear correspondence of EPR double-integrated intensities with optical peak areas shows that all Fe³⁺ is tetrahedrally coordinated in both plagioclase and disordered potassium feldspar. Microcline perthites show, in addition to tetrahedral Fe³⁺, a signal due to axially coordinated ferric iron, which we associate with formation of hematite inclusions.     

Kinetics and mechanism of transformations in iron-rich pyrrhotites and in troilite-pyrrhotite metastable assemblages

Iron-rich pyrrhotites proved to be metastable and to decompose at 70–140° C to troilite and pyrrhotite with less iron content as shown by nuclear gamma-resonance (Mössbauer) studies at high temperatures. Coherence of decomposition product lattices was established by studying powder samples textured in a magnetic field. Detailed X-ray powder diffraction and Mössbauer investigations revealed two different mechanisms of transformation in metastable associations. Kinetic phenomena are discussed in terms of a thermodynamic model of two-phase assemblage.     

The dry oxidation of tetragonal FeS1- x mackinawite

The gradual oxidation of dry mackinawite (tetragonal FeS_{1? x} ) has been studied using X-ray diffraction (XRD), transmission electron microscopy (TEM), transmission Mössbauer spectroscopy (TMS) and X-ray photoelectron spectroscopy (XPS). The initial material and samples exposed to the air (5?min to 6?months) have been analysed. Diffraction patterns showed the slow disappearance of mackinawite with time with concomitant appearance of greigite (Fe₃S₄) and elemental sulphur (S(0)) as well as iron (oxyhydr)oxides, i.e. magnetite (Fe₃O₄) and probably goethite (α-FeOOH). After 6 months' air exposure, mackinawite and also greigite were entirely converted into elemental sulphur and iron (oxyhydr)oxide(s), indicating that greigite was an intermediate reaction product. Mössbauer spectra of samples oxidized in air appeared rather complex for interpreting what was easily conceivable in view of the association of several phases, as revealed by the diffraction patterns. The low-temperature Mössbauer spectrum obtained after 6?months air exposure was attributed to magnetite, although a mixture of magnetite and goethite was not completely excluded. XPS iron and oxygen data confirmed the formation of Fe(III) (oxyhydr)oxides at the surface after an induction period. Sulphur spectra demonstrated various oxidation states from S(-II) (monosulphide) to S(VI) (sulphate) for the longest experiments. Mackinawite in these experiments reacted mainly with adsorbed O₂ to form elemental sulphur and magnetite. Additionally, sufficient sulphur was generated to react stoichiometrically with mackinawite to produce greigite. Finally, greigite, in the longest experiments, was transformed into elemental sulphur and magnetite.     

Surface oxidation of pyrite under ambient atmospheric and aqueous (pH = 2 to 10) conditions: electronic structure and mineralogy from X-ray absorption spectroscopy

The nature of the surface oxidation phase on pyrite, FeS₂, reacted in aqueous electrolytes at pH = 2 to 10 and with air under ambient atmospheric conditions was studied using synchrotron-based oxygen K edge, sulfur L_III edge, and iron L_II,III edge X-ray absorption spectroscopy. We demonstrate that O K edge X-ray absorption spectra provide a sensitive probe of sulfide surface oxidation that is complementary to X-ray photoelectron spectroscopy. Using total electron yield detection, the top 20 to 50 Å of the pyrite surface is characterized. In air, pyrite oxidizes to form predominantly ferric sulfate. In aqueous air-saturated solutions, the surface oxidation products of pyrite vary with pH, with a marked transition occurring around pH 4. Below pH = 4, a ferric (hydroxy)sulfate is the main oxidation product on the pyrite surface. At higher pH, we find iron(III) oxyhydroxide in addition to ferric (hydroxy)sulfate on the surface. Under the most alkaline conditions, the O K edge spectrum closely resembles that of goethite, FeOOH, and the surface is oxidized to the extent that no FeS₂ can be detected in the X-ray absorption spectra. In a 1.667 × 10⁻³ mol/L Fe³⁺ solution with ferric iron present as FeCl₃ in NaCl, the oxidation of pyrite is autocatalyzed, and formation of the surface iron(III) oxyhydroxide phase is promoted at low pH.     

Advanced analyses of 57Fe Mössbauer data of alumino-silicate glasses

⁵⁷Fe Mössbauer spectra of iron bearing alumino-silicate glasses are analysed by two complementary methods (SID and x-VBF) especially adapted for the analysis of disordered systems by taking into account distributions of hyperfine Mössbauer parameters. Qualitative and quantitative information about the oxidation state of iron are obtained as well as information about the distribution of local environments of iron. The possibility to separate the signal of ferric iron from that of ferrous iron allows to derive precise redox ratio in favourable cases but also to analyse more sharply the different contributions to Mössbauer spectra. Using two different glass series (feldspar composition, haplo-tonalitic composition), the characteristics of the two methods are described and employed to study the effect of composition, water incorporation and oxidation state on the glass structure. Optical absorption spectroscopy is used to support the interpretation of the Mössbauer spectra in case of the feldspar glasses.     

Electron transfer at the mineral/water interface: Selenium reduction by ferrous iron sorbed on clay

The mobility and availability of the toxic metalloid selenium in the environment are largely controlled by sorption and redox reactions, which may proceed at temporal scales similar to that of subsurface water movement under saturated or unsaturated conditions. Since such waters are often anaerobic and rich in Fe²⁺, we investigated the long-term (?1 month) kinetics of selenite sorption to montmorillonite in the presence of Fe²⁺ under anoxic conditions. A synthetic montmorillonite was used to eliminate the influence of structural Fe. In the absence of aqueous Fe²⁺, selenite was sorbed as outer-sphere sorption complex, covering only part of the positive edge sites, as verified by a structure-based MUSIC model and Se K-edge XAS (X-ray absorption spectroscopy). When selenite was added to montmorillonite previously equilibrated with Fe²⁺ solution however, slow reduction of Se and formation of a solid phase was observed with Se K-edge XANES (X-ray absorption near-edge spectroscopy) and EXAFS (extended X-ray absorption fine-structure) spectroscopy. Iterative transformation factor analysis of XANES and EXAFS spectra suggested that only one Se reaction product formed, which was identified as nano-particulate Se(0). Even after one month, only 75% of the initially sorbed Se(IV) was reduced to this solid species. Mössbauer spectrometry revealed that before and after addition and reduction of Se, 5% of total sorbed Fe occurred as Fe(III) species on edge sites of montmorillonite (≈2 mmol kg⁻¹). The only change observed after addition of Se was the formation of a new Fe(II) species (15%) attributed to the formation of an outer-sphere Fe(II)-Se sorption complex. The combined Mössbauer and XAS results hence clearly suggest that the Se and Fe redox reactions are not directly coupled. Based on the results of a companion paper, we hypothesize that the electrons produced in the absence of Se by oxidation of sorbed Fe(II) are stored, for example by formation of surface H₂ species, and are then available for the later Se(IV) reduction. The slow reaction rate indicates a diffusion controlled process. Homogeneous precipitation of an iron selenite was thermodynamically predicted and experimentally observed only in the absence of clay. Interestingly, half of Fe was oxidized in this precipitate (Mössbauer). Since DFT calculations predicted the oxidation of Fe at the water-FeSe solid interface only and not in the bulk phase, we derived an average particle size of this precipitate which does not exceed 2 nm. A comparison with the Mössbauer and XAS spectra of the clay samples demonstrates that such homogenous precipitation can be excluded as a mechanism for the observed slow Se reduction, emphasizing the role of abiotic, heterogeneous precipitation and reduction for the removal of Se from subsurface waters.     

57Fe Mössbauer spectroscopy of tektites

Tektite glasses are investigated using ⁵⁷Fe Mössbauer spectroscopy. Room temperature spectra analysis is performed using two complementary analytical methods based on two-dimensional distributions of both isomer shift and quadrupole splitting. No a priori correlation between the two hyperfine parameters is considered. The first method, based on a shape independent distribution, provides the justification for the Gaussian distribution shape used in the second method. No ferric iron contribution is evidenced by Mössbauer spectra analysis in these samples, although several criteria are used. Ferrous iron sites are shown to be continuously distributed between four- and five-fold co-ordinated sites.     

Abiotic reduction of uranium by Fe(II) in soil

Structural Fe(II) has been shown to reduce several oxidized environmental contaminants, including NO₃, chlorinated solvents, Cr(VI), and U(VI). Studies investigating reduction of U(VI) by soils and sediments, however, suggest that abiotic reduction of U(VI) by Fe(II) is not significant, and that direct enzymatic reduction of U(VI) by metal-reducing bacteria is required for U(VI) immobilization as U(IV). Here evidence is presented for abiotic reduction and immobilization of U(VI) by structural Fe(II) in a redoximorphic soil collected from a hillside spring in Iowa. Oxidation of Fe(II) in the soil after reaction with U(VI) was demonstrated by Mössbauer spectroscopy and reduction of U(VI) by the pasteurized soil using U L_III-edge X-ray absorption spectroscopy (XAS). XAS indicates that both reduced U(IV) and oxidized U(VI) or U(V) are present after U(VI) interaction with the Fe(II) containing soil. The EXAFS data show the presence of a non-uraninite U(IV) phase and evidence of the oxidized U(V) or U(VI) fraction being present as a non-uranyl species. Little U(VI) reduction is observed by soil that has been exposed to air and oxidation of Fe(II) to goethite has occurred. Soil characterization based on chemical extractions, Mössbauer spectroscopy, and Fe K-edge XAS indicate that the majority of Fe(II) in the soil is structural in nature, existing in clay minerals and possibly a green rust-like phase. These data provide compelling evidence for abiotic reduction of U(VI) by structural Fe(II) from soil near Fe-rich oxic–anoxic boundaries in natural environments. The work highlights the potential for abiotic reduction of U(VI) by Fe(II) in reduced, Fe-rich environments.     

Iron weathering products in a CO2 + (H2O or H2O2) atmosphere: Implications for weathering processes on the surface of Mars

Various iron-bearing primary phases and rocks have been weathered experimentally to simulate possible present and past weathering processes occurring on Mars. We used magnetite, monoclinic and hexagonal pyrrhotites, and metallic iron as it is suggested that meteoritic input to the martian surface may account for an important source of reduced iron. The phases were weathered in two different atmospheres: one composed of CO₂ + H₂O, to model the present and primary martian atmosphere, and a CO₂ + H₂O + H₂O₂ atmosphere to simulate the effect of strong oxidizing agents. Experiments were conducted at room temperature and a pressure of 0.75 atm. Magnetite is the only stable phase in the experiments and is thus likely to be released on the surface of Mars from primary rocks during weathering processes. Siderite, elemental sulfur, ferrous sulfates and ferric (oxy)hydroxides (goethite and lepidocrocite) are the main products in a water-bearing atmosphere, depending on the substrate. In the peroxide atmosphere, weathering products are dominated by ferric sulfates and goethite. A kinetic model was then developed for iron weathering in a water atmosphere, using the shrinking core model (SCM). This model includes competition between chemical reaction and diffusion of reactants through porous layers of secondary products. The results indicate that for short time scales, the mechanism is dominated by a chemical reaction with second order kinetics (k = 7.75 × 10⁻⁵ g⁻¹/h), whereas for longer time scales, the mechanism is diffusion-controlled (De_A = 2.71 × 10⁻¹⁰ m²/h). The results indicate that a primary CO₂- and H₂O-rich atmosphere should favour sulfur, ferrous phases such as siderite or Fe²⁺-sulfates, associated with ferric (oxy)hydroxides (goethite and lepidocrocite). Further evolution to more oxidizing conditions may have forced these precursors to evolve into ferric sulfates and goethite/hematite.     

Control of Fe(III) site occupancy on the rate and extent of microbial reduction of Fe(III) in nontronite

A quantitative study was performed to understand how Fe(III) site occupancy controls Fe(III) bioreduction in nontronite by Shewanella putrefaciens CN32. NAu-1 and NAu-2 were nontronites and contained Fe(III) in different structural sites with 16 and 23% total iron (w/w), respectively, with almost all iron as Fe(III). Mössbauer spectroscopy showed that Fe(III) was present in the octahedral site in NAu-1 (with a small amount of goethite), but in both the tetrahedral and the octahedral sites in NAu-2. Mössbauer data further showed that the octahedral Fe(III) in NAu-2 existed in at least two environments- trans (M1) and cis (M2) sites. The microbial Fe(III) reduction in NAu-1 and NAu-2 was studied in batch cultures at a nontronite concentration of 5 mg/mL in bicarbonate buffer with lactate as the electron donor. The unreduced and bioreduced nontronites were characterized by X-ray diffraction (XRD), Mössbauer spectroscopy, and transmission electron microscopy (TEM). In the presence of an electron shuttle, anthraquinone-2,6-disulfonate (AQDS), the extent of bioreduction was 11%-16% for NAu-1 but 28%-32% for NAu-2. The extent of reduction in the absence of AQDS was only 5%-7% for NAu-1 but 14%-18% for NAu-2. The control experiments with heat killed cells and without cells did not show any appreciable reduction (<2%). The extent of reduction in experiments performed with a dialysis membrane to separate cells from clays (without AQDS) was 2%-3% for NAu-1 but 5%-7% for NAu-2, suggesting that cells probably released an electron shuttling compound and/or Fe(III) chelator. The reduction rate was also faster in NAu-2 than that in NAu-1. Mössbauer data of the bioreduced nontronite materials indicated that the Fe(III) reduction in NAu-1 was mostly from the presence of goethite, whereas the reduction in NAu-2 was due to the presence of the tetrahedral and trans-octahedral Fe(III) in the structure. The measured aqueous Fe(II) was negligible. As a result of bioreduction, the average nontronite particle thickness remained nearly the same (from 2.1 to 2.5 nm) for NAu-1, but decreased significantly from 6 to 3.5 nm for NAu-2 with a concomitant change in crystal size distribution. The decrease in crystal size suggests reductive dissolution of nontronite NAu-2, which was supported by aqueous solution chemistry (i.e., aqueous Si). These data suggest that the more extensive Fe(III) bioreduction in NAu-2 was due to the presence of the tetrahedral and the trans-octahedral Fe(III), which was presumed to be more reducible. The biogenic Fe(II) was not associated with biogenic solids or in the aqueous solution. We infer that it may be either adsorbed onto surfaces of nontronite particles/bacteria or in the structure of nontronite. Furthermore, we have demonstrated that natural nontronite clays were capable of supporting cell growth even in medium without added nutrients, possibly due to presence of naturally existing nutrients in the nontronite clays. These results suggest that crystal chemical environment of Fe(III) is an important determinant in controlling the rate and extent of microbial reduction of Fe(III) in nontronite.     

Heterogeneous electron-transfer kinetics with synchrotron Fe Mössbauer spectroscopy

In the first known kinetic application of the technique, synchrotron ⁵⁷Fe-Mössbauer spectroscopy was used to follow the rate of heterogeneous electron transfer between aqueous reagents and a solid phase containing Fe. The solid, a synthetic ⁵⁷Fe-enriched Fe(III)-bearing pyroaurite-like phase having terephthalate (TA) in the interlayer [Mg₃Fe(OH)₈(TA)_0.5 · 2H₂O], was reduced by Na₂S₂O₄ and then reoxidized by K₂Cr₂O₇ by means of a novel flow-through cell. Synchrotron Mössbauer spectra were collected in the time domain at 30-s intervals. Integration of the intensity obtained during a selected time interval in the spectra allowed sensitive determination of Fe(II) content as a function of reaction time. Analysis of reaction end member specimens by both the synchrotron technique and conventional Mössbauer spectroscopy yielded comparable values for Mössbauer parameters such as center shift and Fe(II)/Fe(III) area ratios. Slight differences in quadrupole splitting values were observed, however. A reactive diffusion model was developed that fit the experimental Fe(II) kinetic data well and allowed the extraction of second-order rate constants for each reaction. Thus, in addition to rapidly collecting high quality Mössbauer data, the synchrotron technique seems well suited for aqueous rate experiments as a result of the penetrating power of 14.4 keV X-rays and high sensitivity to Fe valence state.