HiRISE observations of gas sublimation-driven activity in Mars’ southern polar regions: IV. Fluid dynamics models of CO2 jets

The High Resolution Imaging Science Experiment (HiRISE) onboard Mars Reconnaissance Orbiter (MRO) has been used to monitor the seasonal evolution of several regions at high southern latitudes on Mars and, in particular, the jet-like activity which may result from the process described by Kieffer (Kieffer, H.H. [2007]. J. Geophys. Res. (Planets) 112, E08005. doi:10.1029/2006JE002816) involving translucent CO₂ ice. In this work, we concentrate on attempting to model the dusty CO₂ gas jets using a computational fluid dynamics code. Models that included surface slopes of up to 20° (as an analogy to the jet activity seen in “Inca City”, 81°S, 296°E), wind (from 0 to 6 m s⁻¹), variable vent cross-section and length, particles (including a particle size distribution) and mass loading (with dust to gas ratios exceeding 1) were investigated. The structure of the resulting gas jets, the particle distribution within the jets, the deposition patterns (including their dependence on particle size), and the appearance of jets when viewed from different orientations (including from a nadir-pointing camera) have been investigated for a range of input parameters. The results provide predictions for the size-dependency of altitudes of particles within a plume and the distribution of particle sizes in the deposition fans. Where slopes are a dominant influence, larger particles are expected to be seen furthest from the vent. Where wind is dominant, smaller particles should travel to larger distances. Models producing deposition patterns consistent in length (∼80 m) and form with fans observed by HiRISE on MRO have been demonstrated. The models also suggest that downward flow of gas produced by drag effects from particles falling from the jet under gravity could provide a mechanism for the production of bright haloes which are observed to surround dark fan deposits in MOC, HiRISE and CRISM.     

“Dust” streaks on Mars

Global mapping and photometry of selected areas on Mars are used to investigate the nature of bright and dark wind streaks that extend from topographic obstacles. Occurrence of both bright and dark streaks is strongly latitude dependent and is only weakly correlated with surface properties such as albedo and thermal inertia. Data on the colors, albedos, and phase behavior of streaks are consistent with models of bright streaks as mosaics of plains material and brighter, redder dust. Less than 20% of the ground need be covered by the optically thick dust in the brightest parts of the streaks; the amount of dust in optically thick layers could be as little as 10^?3 g/cm². Dark streaks can be interpreted as erosional windows in a patchy dust cover. Our model of dust deposition in optically thick patches is sedimentologically different from scenarios involving the deposition of ubiquitous, optically thin layers. It has the advantage that large amounts of dust can be deposited without affecting regional albedos.     

Detection of Interstellar Dust with STEREO/WAVES at 1 AU

Most in situ measurements of cosmic dust have been carried out with dedicated dust instruments. However, dust particles can also be detected with radio and plasma wave instruments. The high velocity impact of a dust particle generates a small crater on the spacecraft, and the dust particle and the crater material are vaporised and partly ionised. The resulting electric charge can be detected with plasma instruments designed to measure electric waves. Since 2007 the STEREO/WAVES instrument has recorded a large number of events due to dust impacts. Here we will concentrate on the study of those impacts produced by dust grains originating from the local interstellar cloud. We present these fluxes during five years of the STEREO mission. Based on model calculations, we determine the direction of arrival of interstellar dust. We find that the interstellar dust direction of arrival is ～260^°, in agreement with previous studies.

     

Modelling observed and future runoff from a glacierized tropical catchment (Cordillera Blanca, Perú)

Monthly runoff from the 34.3% glacierized tropical catchment of Llanganuco in the tropical Cordillera Blanca, Perú, is successfully simulated and compared with a measured 44 year time series. In the investigation area, the climate is characterized by all-year round homogenous temperature conditions and a strong variability in air humidity and moisture content of the atmosphere. Thus, contrary to the mid latitudes, the seasonal variation in glacier melt strongly depends on moisture-related variables, rather than on air temperature. The here presented ITGG-2.0-R model aims for these requirements. The lack of moisture-related input data other than precipitation demands for an intermediate calibration step. Net shortwave radiation, the emissivity of the atmosphere and a sublimation/melt ratio are related to precipitation amounts. Runoff is well simulated and correlates with the measured record with r² = 0.76. Seasonally obtained r² are only slightly smaller. On a long-term, the cumulative deviation is minor, and the mean annual cycle of runoff is reproduced rather well (r² = 0.99). Based on four different IPCC climate change scenarios, future runoff is simulated. All runoff scenarios are modelled for the respective steady-state glacier extent. This leads to a reduction in the glacier size and a decreased amount of glacier melt. On the other hand, direct runoff increases due to larger glacier free areas. Consequently, mean annual runoff remains almost unchanged, but the seasonality intensifies considerably with more runoff during the wet and less runoff during the dry season.     

Noctilucent clouds: Simulation studies of their genesis,properties and global influences

The formation, evolution and properties of noctilucent clouds are studied using a timedependent one-dimensional model of ice particles at mesospheric altitudes. The model treats ice crystals, meteoric dust, water vapor and air ionization as fully interactive cloud elements. For ice particles, the microphysical processes of nucleation, condensation, coagulation and sedimentation are included; the crystal habits of ice are also accounted for. Meteoric dust is analyzed in the manner of Hunten et al. (1980). The simulated particle sizes range from 10 Å to 2.6μm. The chemistry of water vapor and the charge balance of the mesosphere are also analyzed in detail.Based on model calculations, including numerous sensitivity tests, several conclusions are reached. Extremely cold mesopause temperatures (<140K) are necessary to form noctilucent clouds; such temperatures only exist at high latitudes in summer. A water vapor concentration of 4–5 ppmv is sufficient to form a visible cloud. However, a subvisible cloud can exist in the presence of only 1 ppmv of H₂O. Ample cloud condensation nuclei are always present in the mesosphere; at very low temperatures, either meteoric dust or hydrated ions can act as cloud nuclei. To be effective, meteoric dust particles must be larger than 10–15 Å in radius. When dust is present, water vapor supersaturations may be held to such low values that ion nucleation is not possible. Ion nucleation can occur, however, in the absence of dust or at extremely low temperatures (<130K). While dust nucleation leads to a small number (<10cm^?3) of large ice particles (>0.05 μm radius) and cloud optical depths (at 550 nm) ～10^?4, ion nucleation generally leads to a large number (～10³cm^?3) of smaller particles and optical depths ～10^?5). However, because calculated nucleation rates in noctilucent clouds are highly uncertain, the predominant nucleus for the clouds (i.e., dust or ions) cannot be unambiguously established. Noctilucent clouds require several hours-up to a day-to materialize. Once formed, they may persist for several days, depending on local meteorological conditions. However, the clouds can disappear suddenly if the air warms by 10–20 K. The environmental conditions which exist at the high-latitude summer mesopause, together with the microphysics of small ice crystals, dictate that particle sizes will be ? 0.1 μm radius. The ice crystals are probably cubic in structure. It is demonstrated that particles of this size and shape can explain the manifestations of noctilucent clouds. Denser clouds are favored by higher water vapor concentrations, more rapid vertical diffusion and persistent upward convection (which can occur at the summer pole). Noctilucent clouds may also condense in the cold “troughs” of gravity wave trains. Such clouds are bright when the particles remain in the troughs for several hours or more; otherwise they are weak or subvisible.Model simulations are compared with a wide variety of noctilucent cloud data. It is shown that the present physical model is consistent with most of the measurements, as well as many previous theoretical results. Ambient noctilucent clouds are found to have a negligible influence on the climate of Earth. Anthropogenic perturbations of the clouds that are forecast for the next few decades are also shown to have insignificant climatological implications.     

Intercomparisons of land-surface parameterizations coupled to a limited area forecast model

The goal of the Project for Intercomparison of Land-surface Parameterization Schemes (PILPS) is to improve the understanding of the interactions between the atmosphere and the continental surface in climate and weather forecast models. In PILPS Phase 4(b), selected schemes are coupled to the Limited Area Prediction System (LAPS) developed by the Australian Bureau of Meteorology. To facilitate the comparison of PILPS schemes' behavior within LAPS, a single mode of coupling is selected: explicit coupling. This type of coupling is more flexible and avoids most of the problems raised when interchanging the surface schemes. Exploratory tests are conducted. Initially, experiments are run in which the land-surface schemes use the same parameters as in their original host models. Then, in other runs, the most important surface parameters are set constant in an attempt to reduce the scatter amongst the schemes' results. In order to understand the impact of initialisation of soil moisture on the schemes' results some extreme cases (wet and dry) are performed. The partitioning between surface fluxes is studied as well as the soil moisture budget. Both regional and local results are analysed. Sensitivity between LSS is found in the precipitation field with rainfall over the Australian continent altering by about 20%, but no significant change is found in the net radiation. The scatter in the surface energy fluxes amongst the schemes is large (up to 300 W m⁻² locally, during the daytime peak) but is seldom affected by the choice of surface parameters. The dynamical range of flux partitioning between extremely dry and wet initialisation varies strongly amongst the schemes. Some major shortcoming with the BUCKET approach are seen in the re-evaporation of convective precipitation over dry land, in the very large evaporation from wet surfaces and the diurnal cycle of surface temperature.     

Optical properties of circumstellar silicate grains

The optical properties of circumstellar silicate dust grains around oxygen-rich giant stars are investigated with close attention to infrared observations of OH/IR stars. The optical constants are deduced from available astronomical and laboratory data. The deduced opacities at longer wavelengths (12 m) for OH/IR stars are higher than the one for M-type Miras possibly because of the change of optical constants depending on temperature of dust grains. Absorption and scattering efficiencies are evaluated for various grain size distributions and shapes. The results of detailed radiative transfer model calculations based on our dust parameters are compared with observational data. The Planck mean values incorporating substantial far-infrared absorption are also calculated.Yonsei University Observatory Contribution No. 91.Department of Astronomy and Space Science, Chungbuk National University Contribution No. 4.     

On possible release of microbe-containing particulates from a Mars lander spacecraft

Due to possible planet contamination, before Earth-departure, Mars landers and/or rovers are subject to strict requirements on the maximum number of attached spores or particles that carry viable microbes. Estimates of the release rates of these particles on Mars are made considering the three mechanisms of wind shear, collision with suspended dust, and collision with saltating sand particles. The first mechanism is found to apply only to particles of size greater than , the second mechanism has a characteristic particle adhesion half life that is so long as to be of no concern, and the third mechanism is deemed of possible importance, vitally depending on attached particle size and detailed surface characteristics of sand and spacecraft. While not investigated in detail, dust devils are shown to be possible contributors to release of microbe-containing particles.     

A calculation of the Rosseland mean opacity of dust grains in primordial solar system nebulae

The Rosseland mean opacity was determined for an ensemble of dust grain species though to have been present in the early solar nebula, as well as in the primordial nebulae that helped to form the outer planets. In performing these calculations, we have derived and used more general equation for the Rosseland opacity that allows for anisotropic scattering. The identity of the major particle species and their relative abundances were found from thermodynamic equilibrium and solar elemental abundances. The optical constants of these materials were defined at wavelengths ranging from near-UV to the radio domain. Calculations were performed for a very wide range of particle size distributions, including a nominal one based on that of interstellar dust grains. In addition, asymptotic expressions for the Rosseland opacity are derived in the limits of very small and very large sized particles. Results are presented for nebular temperatures varying from 10 to 2500°K and for nebular gas densities varying from 10^?14 to 1 g/cm³. The values of the Rosseland mean opacity do not depend sensitively on the choice of the particle size distribution function, provided that there are few particles having sizes in excess of several tens of microns. At low temperatures that lie within the stability field of condensed water (?200°K), this opacity varies approximately as the square of the temperature for the nominal size distribution and for all distributions having few particles larger than several tens of microns. However, the Rosseland opacity has a much weaker temperature dependence at higher temperatures for this class of size distributions and at all temperatures for size distributions containing numerous particles larger than several tens of microns. As a result, thermal convection in primordial nebulae occurs over broader ranges of altitudes at low temperatures and for size distributions for which extensive aggregation has not yet occurred.     

Aeolian dust experiment on climate impact: An overview of Japan–China joint project ADEC

The Aeolian Dust Experiment on Climate Impact (ADEC) was initiated in April 2000 as a joint five-year Japan–China project. The goal was to understand the impact of aeolian dust on climate via radiative forcing (RF). Field experiments and numerical simulations were conducted from the source regions in northwestern China to the downwind region in Japan in order to understand wind erosion processes temporal and spatial distribution of dust during their long-range transportation chemical, physical, and optical properties of dust and the direct effect of radiative forcing due to dust. For this, three intensive observation periods (IOP) were conducted from April 2002 to April 2004.The in situ and network observation results are summarized as follows: (1) In situ observations of the wind erosion process revealed that the vertical profile of moving sand has a clear size dependency with height and saltation flux and that threshold wind velocity is dependent on soil moisture. Results also demonstrated that saltation flux is strongly dependent on the parent soil size distribution of the desert surface. (2) Both lidar observations and model simulations revealed a multiple dust layer in East Asia. A numerical simulation of a chemical transport model, CFORS, illustrated the elevated dust layer from the Taklimakan Desert and the lower dust layer from the Gobi Desert. The global-scale dust model, MASINGAR, also simulated the dust layer in the middle to upper free troposphere in East Asia, which originated from North Africa and the Middle East during a dust storm in March 2003. Raman lidar observations at Tsukuba, Japan, found the ice cloud associated with the dust layer at an altitude of 6 to 9 km. Analysis from lidar and the radio-sonde observation suggested that the Asian dust acted as ice nuclei at the ice-saturated region. These results suggest the importance of dust's climate impact via the indirect effect of radiative forcing due to the activation of dust into ice nuclei. (3) Studies on the aerosol concentration indicated that size distributions of aerosols in downwind regions have bimodal peaks. One peak was in the submicron range and the other in the supermicron range. The main soluble components of the supermicron peak were Na⁺, Ca²⁺, NO₃⁻, and Cl⁻. In the downwind region in Japan, the dust, sea salt, and a mixture of the two were found to be dominant in coarse particles in the mixed boundary layer. (4) Observation of the optical properties of dust by sky-radiometer, particle shoot absorption photometer (PSAP), and Nephelometer indicated that unpolluted dust at source region has a weaker absorption than originally believed.A sensitivity experiment of direct RF by dust indicated that single scattering albedo is the most important of the optical properties of dust and that the sensitivity of instantaneous RF in the shortwave region at the top of the atmosphere to the refractive index strongly depends on surface albedo. A global scale dust model, MASINGAR, was used for evaluation of direct RF due to dust. The results indicated the global mean RF at the top and the bottom of the atmosphere were − 0.46 and − 2.13 W m^− 2 with cloud and were almost half of the RF with cloud-free condition.     

A reanalysis of the Apollo light scattering observations, and implications for lunar exospheric dust

Conspicuous excess brightness, exceeding that expected from coronal and zodiacal light (CZL), was observed above the lunar horizon in the Apollo 15 coronal photographic sequence acquired immediately after orbital sunset (surface sunrise). This excess brightness systematically faded as the Command Module moved farther into shadow, eventually becoming indistinguishable from the CZL background. These observations have previously been attributed to scattering by ultrafine dust grains (radius ∼0.1 microns) in the lunar exosphere, and used to obtain coarse estimates of dust concentration at several altitudes and an order-of-magnitude estimate of ∼10⁻⁹ g cm⁻² for the column mass of dust near the terminator, collectively referred to as model “0”.We have reanalyzed the Apollo 15 orbital sunset sequence by incorporating the known sightline geometries in a Mie-scattering simulation code, and then inverting the measured intensities to retrieve exospheric dust concentration as a function of altitude and distance from the terminator. Results are presented in terms of monodisperse (single grain size) dust distributions. For a grain radius of 0.10 microns, our retrieved dust concentration near the terminator (∼0.010 cm⁻³) is in agreement with model “0” at z=10 km, as is the dust column mass (∼3–6×10⁻¹⁰ g cm⁻²), but the present results indicate generally larger dust scale heights, and much lower concentrations near 1 km (<0.08 cm⁻³ vs. a few times 0.1 cm⁻³ for model “0"). The concentration of dust at high altitudes (z>50 km) is virtually unconstrained by the measurements. The dust exosphere extends into shadow a distance somewhere between 100 and 200 km from the terminator, depending on the uncertain contribution of CZL to the total brightness. These refined estimates of the distribution and concentration of exospheric dust above the lunar sunrise terminator should place new and more rigorous constraints on exospheric dust transport models, as well as provide valuable support for upcoming missions such as the Lunar Atmosphere and Dust Environment Explorer (LADEE).     

Dust to planetesimals: Settling and coagulation in the solar nebula

The behavior of solid particles in a low-mass solar nebula during settling to the central plane and the formation of planetesimals is examined. Gravitational instability in a dust layer and collisional accretion are considered as possible mechanisms of planetesimal formation. Non-Keplerian rotation of the nebula results in shear between the gas and a dust layer. This shear produces turbulence within the layer which inhibits gravitational instability, unless the mean particle size exceeds a critical value, ～1 cm at 1 AU. The size requirement is less stringent at larger heliocentric distances, suggesting a possible difference in planetesimal formation mechanisms between the inner and outer nebula. Coagulation of grains during settling is expected in the solar nebula environment. Van der Waals forces appear adequate to produce centimeter-sized aggregates. Growth is primarily due to sweepup of small particles by larger ones due to size-dependent settling velocities. A numerical model for computing simultaneous coagulation and settling is described. Relative velocities are determined by gas drag and the non-Keplerian rotation of the nebula. The settling is very nonhomologous. Most of the solid matter reaches the central plane as centimeter-sized aggregates in a few times 10³ revolutions, but some remains suspended in the form of fine dust. Drag-induced relative velocities result in collisions. The growth of bodies in the central plane is initially rapid. After sizes reach ～10³ cm, relative velocities decrease and the growth rate declines. Gas drag rapidly damps the out-of-plane motions of these intermediate-sized bodies. They settle into a thin layer which is subject to gravitational instability. Kilometer-sized planetesimals are formed by this composite process.     

Preliminary analysis of the MER magnetic properties experiment using a computational fluid dynamics model

Motivated by questions raised by the magnetic properties experiments on the NASA Mars Pathfinder and Mars Exploration Rover (MER) missions, we have studied in detail the capture of airborne magnetic dust by permanent magnets using a computational fluid dynamics (CFD) model supported by laboratory simulations. The magnets studied are identical to the capture magnet and filter magnet on MER, though results are more generally applicable.The dust capture process is found to be dependent upon wind speed, dust magnetization, dust grain size and dust grain mass density. Here we develop an understanding of how these parameters affect dust capture rates and patterns on the magnets and set bounds for these parameters based on MER data and results from the numerical model. This results in a consistent picture of the dust as containing varying amounts of at least two separate components with different physical properties.     

A dynamical model with a new inversion technique applied to observations of Comet C/2000 WM1 (LINEAR)

Three continuum images of Comet C/2000 WM₁ (LINEAR) obtained on Nov 10, Nov 19, and Dec 03, 2001, are analyzed with the aid of a dynamical model, i.e. with a model that uses the size-dependent motion of dust grains under solar radiation pressure to determine the dust size distribution and its temporal change. The frames are photometrically calibrated in terms of the albedo filling factor product. On Nov 20.2 the Earth transited the orbital plane of the comet and an anti-tail was recognized in the image of Nov 19. For the determination of the particle fluxes describing the contribution of monodisperse particle shells to the cometary brightness the model uses a new regularization method employing Chebyshev polynomials of selected orders in emission time and particle size. It guarantees positiveness of the particle fluxes and imposes a varying degree of smoothness on their dependence on particle size and emission time. The particle emission velocities are still derived by trial and error. The dynamical model is described in detail. Results are presented for several low orders of the Chebyshev polynomials and are compared in order to understand the limitations imposed by the regularization process. The size distributions derived from the different observations do not always agree. This is particularly true for the earliest and most recent synchrones contributing to an image. In the observations of Nov 10 and Dec 03, i.e. excluding the anti-tail image, the integrated mass loss strongly decreases in the most recent time steps of the model although the comet is still approaching the Sun. This is interpreted as an artifact introduced by the overlap of the shells of large particle size emitted shortly before the observation. The model derives an increasing number of small particles released by the comet in the second half of November. This is at least in part considered as real and attributed to particle fragmentation occurring when the comet was at a heliocentric distance of about 1.4 AU.     

Dust transport in photoelectron layers and the formation of dust ponds on Eros

We investigate the electrostatic transport of charged dust in the photoelectron layer over the dayside surface of an asteroid. Micron-sized dust particles may be levitated above the surface in the photoelectron layer. Horizontal transport within the layer can then lead to net deposition of dust into shadowed regions where the electric field due to the photoelectron layer disappears. We apply a 2D numerical model simulating charged dust dynamics in the near-surface daytime plasma environment of Asteroid 433 Eros to the formation of dust deposits in craters. We find that dust tends to collect in craters and regions of shadow. This electrostatic dust transport mechanism may contribute to the formation of smooth dust ponds observed by the NEAR-Shoemaker spacecraft at Eros. The size distribution of transported dust depends on the particle density and work function, and the work function of the surface and solar wind electron temperature and density. With reasonable values for these parameters, μm-sized and smaller particles are levitated at Eros. Micrometeoroid bombardment is not a sufficient source mechanism for electrostatic transport to create the Eros dust ponds. Laboratory measurements of dust in a plasma sheath show that dust launched off the surface by direct electrostatic levitation can provide a sufficient source for transport to produce the observed Eros ponds.     

Constraints on the nucleus and dust properties from mid-infrared imaging of comet Hyakutake

We use Mie scattering theory to determine the expected thermal emission from dust grains in cometary comae and apply these results to mid-infrared images of comet Hyakutake (C/1996 B2) obtained preperihelion in 1996 March. Calculations were performed for dust grains in the size range from 0.1 to 10 micrometers for two different compositions: amorphous olivine (a silicate glass) and an organic residue mixture. The resulting emission efficiencies are complicated functions of wavelength and particle size and are significantly different for the two materials in question. The Hyakutake data set consists of three nights of high-resolution imaging (100-150 km pixel-1 at the comet) of the inner coma at 8.7, 11.7, 12.5, and 19.7 micrometers. Attempts to fit the observed colors (ratios of fluxes at different wavelengths) using a single grain composition failed. However, fits to the data were achieved for all three nights using a mixture of approximately 1 micrometer olivine grains and approximately 7 micrometers organic grains. The resulting olivine mass fraction was between 8% and 16% of the total dust mass-loss rate. We also estimate the radius of the nucleus to be r = 2.1 +/- 0.4 km.     

DuneXpress

The DuneXpress observatory will characterize interstellar and interplanetary dust in-situ, in order to provide crucial information not achievable with remote sensing astronomical methods. Galactic interstellar dust constitutes the solid phase of matter from which stars and planetary systems form. Interplanetary dust, from comets and asteroids, represents remnant material from bodies at different stages of early solar system evolution. Thus, studies of interstellar and interplanetary dust with DuneXpress in Earth orbit will provide a comparison between the composition of the interstellar medium and primitive planetary objects. Hence DuneXpress will provide insights into the physical conditions during planetary system formation. This comparison of interstellar and interplanetary dust addresses directly themes of highest priority in astrophysics and solar system science, which are described in ESA’s Cosmic Vision. The discoveries of interstellar dust in the outer and inner solar system during the last decade suggest an innovative approach to the characterization of cosmic dust. DuneXpress establishes the next logical step beyond NASA’s Stardust mission, with four major advancements in cosmic dust research: (1) analysis of the elemental and isotopic composition of individual interstellar grains passing through the solar system, (2) determination of the size distribution of interstellar dust at 1 AU from 10^− 14 to 10^− 9 g, (3) characterization of the interstellar dust flow through the planetary system, (4) establish the interrelation of interplanetary dust with comets and asteroids. Additionally, in supporting the dust science objectives, DuneXpress will characterize dust charging in the solar wind and in the Earth’s magnetotail. The science payload consists of two dust telescopes of a total of 0.1 m² sensitive area, three dust cameras totaling 0.4 m² sensitive area, and a nano-dust detector. The dust telescopes measure high-resolution mass spectra of both positive and negative ions released upon impact of dust particles. The dust cameras employ different detection methods and are optimized for (1) large area impact detection and trajectory analysis of submicron sized and larger dust grains, (2) the determination of physical properties, such as flux, mass, speed, and electrical charge. A nano-dust detector searches for nanometer-sized dust particles in interplanetary space. A plasma monitor supports the dust charge measurements, thereby, providing additional information on the dust particles. About 1,000 grains are expected to be recorded by this payload every year, with 20% of these grains providing elemental composition. During the mission submicron to micron-sized interstellar grains are expected to be recorded in statistically significant numbers. DuneXpress will open a new window to dusty universe that will provide unprecedented information on cosmic dust and on the objects from which it is derived.     

Absorption bands and extinction in small interstellar particles

The production of discrete line and broad-band extinction by small interstellar oxide and silicate particles is discussed quantitatively. Restrictions on particle size and refractive index that are required to produce ‘pure’ absorption features are reviewed. The relationship between optical depth in interstellar extinction and absorption coefficients for bulk materials is used to reach some general conclusions concerning the diffuse interstellar features, VUV extinction and the composition of interstellar dust. It is noted that charge transfer bands of ions such as Fe³⁺ may be detectable in the VUV spectrum of dust. Several effects that lead to the enhancement of oscillator strength by 10³–10⁴ in small particles are discussed.     

Analytical scanning and transmission electron microscopy of laboratory impacts on Stardust aluminum foils: Interpreting impact crater morphology and the composition of impact residues

Abstract— The known encounter velocity (6.1 kms^?1) and particle incidence angle (perpendicular) between the Stardust spacecraft and the dust emanating from the nucleus of comet Wild‐2 fall within a range that allows simulation in laboratory light‐gas gun (LGG) experiments designed to validate analytical methods for the interpretation of dust impacts on the aluminum foil components of the Stardust collector. Buckshot of a wide size, shape, and density range of mineral, glass, polymer, and metal grains, have been fired to impact perpendicularly on samples of Stardust Al 1100 foil, tightly wrapped onto aluminum alloy plate as an analogue of foil on the spacecraft collector. We have not yet been able to produce laboratory impacts by projectiles with weak and porous aggregate structure, as may occur in some cometary dust grains. In this report we present information on crater gross morphology and its dependence on particle size and density, the pre‐existing major‐ and trace‐element composition of the foil, geometrical issues for energy dispersive X‐ray analysis of the impact residues in scanning electron microscopes, and the modification of dust chemical composition during creation of impact craters as revealed by analytical transmission electron microscopy. Together, these observations help to underpin the interpretation of size, density, and composition for particles impacted on the Stardust aluminum foils.     

Polarimetric study of levitating dust aggregates with the PROGRA experiment

In order to interpret polarimetric remote observations of solar system dust clouds (e.g. cometary coma dust), laboratory measurements are needed. Three samples composed of aggregates are studied: crystallized enstatite, pyrogenic alumina and titanium oxide. The new version of the PROGRA² instrument allows to obtain polarimetric images of the samples under levitation. The dependence of polarization with phase angle and particle size is studied, as well as the effect of the porosity of the particles. Values of polarization at small phase angles are also discussed. The polarization near 90° decreases when the agglomerate size increases and when the porosity increases.