An automatic ordering method for streams in surface-water/groundwater interaction modeling

The widely used groundwater flow model MODFLOW offers a range of software packages to simulate the interaction between streams and groundwater in aquifer systems. However, these existing packages lack a general method to address the chaotic simulation sequences of stream segments and require these segments to be ordered by modelers as input to the code. Therefore, it is challenging to simulate a stream network divided into a large number of segments such as a canal irrigation system. In this study, the Streamflow Automatic Routing (SAR) package was developed, and an effective method is proposed to automatically determine the segment simulation sequence. The stream segment order in the SAR input file is arbitrary, which allows modifications of the stream network by removing segments directly and adding segments at the end of the segment group. This mainly includes two processes: scanning all the outlet channels of the water system and calling the recursive algorithm for each outlet channel of the water system. The SAR package was tested using a hypothetical stream–aquifer system and applied to a complex flow field in Aiding Lake of Turpan Basin, China. In the results, a close fitting between the simulation and observations shows that the SAR package precisely simulated the exchange flux between the steams and aquifer. The SAR package can significantly improve the efficiency of simulations in a complex stream network, and it can be widely used as a subroutine package of MODFLOW in agricultural irrigation areas where rivers and canals are interlaced.

     

The impact of tunneling construction on the hydrogeological environment of “Tseng-Wen Reservoir Transbasin Diversion Project” in Taiwan

Groundwater flow and the associated surface water flow are potential negative factors on underground tunnels. Early detection of environmental impacts on water resources is of significant importance to planning, design and construction of tunnel projects, as early detection can minimize accidents and project delays during construction. The groundwater modeling software package Groundwater Modeling System (GMS), which supports the groundwater numerical codes MODFLOW and FEMWATER, was utilized to determine the impact of tunneling excavation on the hydrogeological environment in a regional area around the tunnel and a local hot springs area, at the “Tseng-Wen Reservoir Transbasin Diversion Project”, in Taiwan. A hydrogeological conceptual model was first developed to simplify structures related to the site topography, geology and geological structure. The MODFLOW code was then applied to simulate groundwater flow pattern for the hydrogeological conceptual model in the tunnel area. The automated parameter estimation method was applied to calibrate groundwater level fluctuation and hydrogeological parameters in the region. Calibration of the model demonstrated that errors between simulated and monitored results are smaller than allowable errors. The study also observed that tunneling excavation caused groundwater to flow toward the tunnel. No obvious changes in the groundwater flow field due to tunnel construction were observed far away in the surrounding regions. Furthermore, the FEMWATER code for solving 3-D groundwater flow problems, in which hydrogeological characteristics are integrated into a geographic information system (GIS), is applied to evaluate the impact of tunnel construction on an adjacent hot spring. Simulation results indicated that the groundwater drawdown rate is less than the groundwater recharge rate, and the change to the groundwater table after tunnel construction was insignificant for the hot spring area. Finally, the groundwater flow obtained via the GMS indicated that the hydrogeological conceptual model can estimate the possible quantity of tunnel inflow and the impact of tunnel construction on the regional and local groundwater resources regime of the transbasin diversion project.     

Application of MODFLOW and geographic information system to groundwater flow simulation in North China Plain, China

MODFLOW is a groundwater modeling program. It can be compiled and remedied according to the practical applications. Because of its structure and fixed data format, MODFLOW can be integrated with Geographic Information Systems (GIS) technology for water resource management. The North China Plain (NCP), which is the politic, economic and cultural center of China, is facing with water resources shortage and water pollution. Groundwater is the main water resource for industrial, agricultural and domestic usage. It is necessary to evaluate the groundwater resources of the NCP as an entire aquifer system. With the development of computer and internet information technology it is also necessary to integrate the groundwater model with the GIS technology. Because the geological and hydrogeological data in the NCP was mainly in MAPGIS format, the powerful function of GIS of disposing of and analyzing spatial data and computer languages such as Visual C and Visual Basic were used to define the relationship between the original data and model data. After analyzing the geological and hydrogeological conditions of the NCP, the groundwater flow numerical simulation modeling was constructed with MODFLOW. On the basis of GIS, a dynamic evaluation system for groundwater resources under the internet circumstance was completed. During the process of constructing the groundwater model, a water budget was analyzed, which showed a negative budget in the NCP. The simulation period was from 1 January 2002 to 31 December 2003. During this period, the total recharge of the groundwater system was 49,374 × 10⁶ m³ and the total discharge was 56,530 × 10⁶ m³ the budget deficit was −7,156 × 10⁶ m³. In this integrated system, the original data including graphs and attribution data could be stored in the database. When the process of evaluating and predicting groundwater flow was started, these data were transformed into files that the core program of MODFLOW could read. The calculated water level and drawdown could be displayed and reviewed online.     

Determination of water balance equation components in irrigated agricultural watersheds using SWAT and MODFLOW models : A case study of Samalqan plain in Iran

Increasing water demands,especially in arid and semi-arid regions,continuously exacerbate groundwater as the only reliable water resources in these regions.Samalqan watershed,Iran,is a groundwater-based irrigation watershed,so that increased aquifer extraction,has caused serious groundwater depletion.So that the catchment consists of surface water,the management of these resources is essential in order to increase the groundwater recharge.Due to the existence of rivers,the low thickness of the alluvial sediments,groundwater level fluctuations and high uncertainty in the calculation of hydrodynamic coefficients in the watershed,the SWAT and MODFLOW models were used to assess the impact of irrigation return flow on groundwater recharge and the hydrological components of the basin.For this purpose,the irrigation operation tool in the SWAT model was utilized to determine the fixed amounts and time of irrigation for each HRU(Hydrological Response Unit)on the specified day.Since the study area has pressing challenges related to water deficit and sparsely gauged,therefore,this investigation looks actual for regional scale analysis.Model evaluation criteria,RMSE and NRMSE for the simulated groundwater level were 1.8 m and 1.1%respectively.Also,the simulation of surface water flow at the basin outlet,provided satisfactory prediction(R²=0.92,NSE=0.85).Results showed that,the irrigation has affected the surface and groundwater interactions in the watershed,where agriculture heavily depends on irrigation.Annually 11.64 Mm3 water entered to the aquifer by surface recharge(precipitation,irrigation),transmission loss from river and recharge wells 5.8 Mm3 and ground water boundary flow(annually 20.5 Mm³).Water output in the watershed included ground water extraction and groundwater return flow(annually 46.4 Mm³)and ground water boundary flow(annually 0.68 Mm³).Overally,the groundwater storage has decreased by 9.14 Mm3 annually in Samalqan aquifer.This method can be applied to simulate the effects of surface water fluxes to groundwater recharge and river-aquifer interaction for areas with stressed aquifers where interaction between surface and groundwater cannot be easily assessed.     

Hydrogeological condition and assessment of groundwater resource using visual modflow modeling,Rajshahi city aquifer,Bangladesh

The Rajshahi city is the fourth largest metropolitan city in Bangladesh on the bank of the River Padma (Ganges). Here an upper semi-impervious layer overlies aquifer — the source for large-scale groundwater development. The groundwater resource study using Visual MODFLOW modeling shows that recharge occurs mainly due to infiltration of rainfall and urban return flow at low rate, and water level fluctuates seasonally in response to recharge and discharge. Hydraulic connection between river and aquifer which indicates inflow from high river water levels beyond its boundaries. The total groundwater abstraction in 2004 (15000 million liters) is lower than total input to aquifer reveals an ample potentiality for groundwater development with increasing demand. But groundwater shortage (1000 million liter/year) especially in the vicinity of the River Padma in dry season happens due to its increasing use and fall of river water level resulting in reduced inflows and hence decline in groundwater level. The conjunctive use of surface water-groundwater and its economic use will help for sustainable groundwater supply to avoid adverse impact.     

基于MODFLOW参数不确定性的地下水水流数值模拟方法

考虑到模型不确定性引起的地下水数值模拟不确定性对模拟过程的影响,在简要介绍含水层水文地质参数变异性研究进展和地质统计学的基础上,基于常用的确定性地下水流数值模拟软件MODFLOW开发了MODFLOW-Gslib软件,相较于传统的数值模拟方法,将地质统计学与数值模拟结合的方法能够模拟非均质含水层中的参数变异性问题。将MODFLOW-Gslib软件运用于模拟实例中,选择常见的不确定性因素进行模拟,并对其模拟产生的数据进行统计分析,结果表明,软件转化后的参数符合水文地质参数不确定性的相关特征;与原模拟结果进行对比,该软件能够更加真实地刻画含水层参数变异性特征。     

Aquifer parameter estimation using tide-induced water-table fluctuations in the Biscayne Aquifer,Miami-Dade County,Florida (USA)

The Biscayne Aquifer (Florida, USA) is a coastal, shallow, unconfined, and heterogeneous aquifer with high water tables, composed of less-permeable sand to highly permeable karstic limestone. These properties make the Biscayne Aquifer one of the world’s most productive groundwater resources. The aquifer’s high yield and non-Darcian flow cause challenges for estimating aquifer parameters, which are essential for understanding groundwater processes and managing and protecting the groundwater resources. Water-table fluctuations in the Biscayne Aquifer are associated with astronomical tidal forces and gate operations on canal water-control structures. Analysis of observed groundwater level fluctuations can provide an understanding of the connectivity between the aquifer, Biscayne Bay, and the water level in the canals. Further, groundwater level fluctuations can be used for aquifer parameter estimation. In this research, observed ocean water levels measured at tidal stations and groundwater levels are fitted to Jacob’s analytical solution, where the amplitude of the groundwater head fluctuation decreases exponentially, and the time lag increases with distance from the shore. Observed groundwater levels were obtained from monitoring wells along the Miami-Dade shore and the barrier island of Miami Beach. Results indicate that Jacob’s solution is effective for aquifer parameter estimation in Miami Beach, where monitoring wells are closer to the shore. Estimated hydraulic conductivity appears to increase by four orders of magnitude to approximately 1 m s^–1 as the distance from shore increases. Constructing monitoring wells closer to the shore in Miami-Dade County and elsewhere would permit improved aquifer parameter estimation and support enhanced groundwater modeling efforts.

     

Seawater intrusion in the Salalah plain aquifer,Oman

Salalah is situated on a fresh water aquifer that is replenished during the annual monsoon season. The aquifer is the only source of water in Salalah city. The rainfall and mist precipitation in the Jabal AlQara recharges the plain with significant renewable fresh groundwater that has allowed agricultural and industrial development to occur. In Salalah city where groundwater has been used extensively since the early 1980s for agricultural, industrial and municipal purposes, the groundwater has been withdrawn from the aquifer more rapidly than it can be replenished by natural recharge. The heavy withdrawal of large quantities of the groundwater from the aquifer has led to the intrusion of seawater. Agricultural activities utilize over 70% of the groundwater. For the study of the saltwater intrusion, the area has been divided into four strips, A, B, C and D, on the basis of land-use in the area. Water samples were collected from 18 water wells. Chemical analysis of major ions and pollution parameters in the groundwater was carried out and compared to the previous observed values. The electrical conductivity and chloride concentrations were highest in the agricultural and residential strips and Garziz grass farm. Before 1992 the aquifer was in a steady state, but presently (2005) the groundwater quality in most of the agricultural and residential strips does not meet drinking water standards. In addition, model simulations were developed with the computer code MODFLOW and MT3DMS for solute transport to determine the movement of the freshwater/saltwater interface. The study proposes the protection of the groundwater in Salalah plain aquifer from further encroachment by artificial recharge with reclaimed water, preferably along the Salalah coastal agricultural strip. This scheme can also be applied to other regions with similar conditions.     

A spatio-temporal three-dimensional conceptualization and simulation of Dera Ismail Khan alluvial aquifer in visual MODFLOW: a case study from Pakistan

Dera Ismail Khan (DIK) is situated in the Lower Indus Basin of Pakistan. The land use has been changed in the canal command area due to irrigation activities near the Indus River. To check the current status and predict the groundwater levels in the area, the unconfined aquifer has been simulated in Visual MODFLOW for a period of 35 years, i.e., from 1985 to 2020. The 2900-km² area has been modeled with a grid of 500 by 500 m and the depth set to 100 m. The aquifer in the study area has been divided vertically and laterally into three and ten zones, respectively, for the characterization. Water wells and streams were used as the sinks and hydrologic boundaries, respectively. The model was successfully calibrated in steady and the non-steady state. The simulation revealed that the whole simulation can be divided into two phases, i.e., before and after the construction of the Chashma Right Bank Canal (CRBC), whereas the results were summarized in the form of water table depth maps and groundwater budget calculations. To determine the groundwater sustainability, a conjunctive use scenario has been employed to simulate the aquifer dynamics till 2020. The simulation revealed incremental drawdowns till the end.     

美国Sand Hills地区地下水数值模拟及水量平衡分析

利用地下水数值模型MODFLOW和非饱和带水平衡模型对处于半干旱半湿润沙丘地区(Sand Hills)地下水位进行了模拟,并分析了含水层补排水量,河流与地下水补排关系,以及区域水平衡过程。揭示了独特沙丘地形和土壤特性对地下水补排量的影响。模拟结果表明,入渗率大、非饱和带厚的沙丘有利于降水入渗补给,减少了地下水蒸散发损失。加上下覆含水层具有良好的地下水储水空间,是该地区储存丰富的地下水量,以维持河流稳定流量,供给众多湖泊和湿地的原因。该研究对我国地下水资源评价和生态环境脆弱地区水资源保护具有指导意义。     

深埋隧道外水压力计算的解析-数值法

在高水头富水区，抗水压衬砌设计的关键在于外水压力的计算。深埋隧道排水时，沿轴线方向上流入隧道的水量来自于隧道掌子面的前方，当隧道施工足够长度后，可以认为已施工断面的地下水只从隧道两侧向断面内运动，此时可将三维问题处理为二维。对于深埋隧道，当其断面远小于水头时，可处理为一个点井；隧道全断面排水时，隧道断面线可处理为定流量边界。首先建立隧道排水的水文地质概念模型，采和经验解析法预测隧道的涌水量，然后将涌水量代入隧道围岩渗流的剖面二维模型，模拟隧道排水时围岩渗流场的分布，再采用作用系数的方法计算出隧道衬砌的外水压力。     

A new hybrid framework of site selection for groundwater recharge

Since incorrect site selection has sometimes led to the failure of artificial recharge projects,it is necessary to increase the effectiveness of such projects and minimize their failure by employing new techniques.Therefore,the present research used a combination of decision-making models,numerical groundwater modeling and clustering technique to determine suitable sites for implementation of an artificial recharge project.This hybrid approach was employed for the Yasouj aquifer located in southwestern Iran.In the first stage,by employing an AHP decision-making model,hydraulic conductivity,specific yield,slope,land use,depth to groundwater,and aquifer thickness were selected from 21 criteria used in previous research.The selected criteria were then entered as input into the classical k-means clustering model.Using the output,aquifer was divided into seven different regions or clusters.These clusters were then matched with the land use map,and some of the abandoned land areas were selected as the final option for implementing the artificial recharge project.Finally,the MODFLOW code in the GMS software was used to simulate the groundwater level and cluster the sites selected,with regards to increase in groundwater level.Results indicated that the most significant increases in groundwater level(43 and 27 cm) were those of Clusters 2 and 6 in the northern and western parts of the aquifer,respectively.Therefore,this approach can be used in other similar aquifers in arid and semi-arid regions to select the best sites for artificial recharge and to prevent loss of floodwaters.     

Toward reliable calibration of aquifer hydrodynamic parameters: characterizing and optimization of arid groundwater system using swarm intelligence optimization algorithm

Despite advanced development in computational techniques, the issue of how to adequately calibrate and minimize misfit between system properties and corresponding measurements remains a challenging task in groundwater modeling. Two important features of the groundwater regime, hydraulic conductivity (k) and specific yield (S _y), that control aquifer dynamic vary spatially within an aquifer system due to geologic heterogeneity. This paper provides the first attempt in using an advanced swarm-intelligence-based optimization algorithm (cuckoo optimization algorithm, COA) coupled with a distributed hydrogeology model (i.e., MODFLOW) to calibrate aquifer hydrodynamic parameters (S _y and k) over an arid groundwater system in east Iran. Our optimization approach was posed in a single-objective manner by the trade-off between sum of absolute error and the adherent swarm optimization approach. The COA optimization algorithm further yielded both hydraulic conductivity and specific yield parameters with high performance and the least error. Estimation of depth to water table revealed skillful prediction for a set of cells located at the middle of the aquifer system whereas showed unskillful prediction at the headwater due to frequent water storage changes at the inflow boundary. Groundwater depth reduced from east toward west and southwest parts of the aquifer because of extensive pumping activities that caused a smoothening influence on the shape of the simulated head curve. The results demonstrated a clear need to optimize arid aquifer parameters and to compute groundwater response across an arid region.     

Groundwater flow modelling of Hindon-Yamuna interfluve region, Western Uttar Pradesh

The study area Hindon -Yamuna interfluve region is underlain by a thick pile of unconsolidated Quaternary alluvial deposits and host multiple aquifer system. Excessive pumping in the last few decades, mainly for irrigation, has resulted in a significant depletion of the aquifer. Therefore, proper groundwater management of Hindon-Yamuna interfluve region is necessary. For effective groundwater management of a basin it is essential that careful zone budget study should be carried out. Keeping this in view, groundwater flow modelling was attempted to simulate the behavior of flow system and evaluate zone budget. Visual MODFLOW, pro 4.1 is used in this study to simulate groundwater flow. The model simulates groundwater flow over an area of about 1345 km² with a uniform grid size of 1000 m by 1000 m and contains three layers, 58 rows and 37 columns. The horizontal flows, seepage losses from unlined canals, recharge from rainfall and irrigation return flows were applied using different boundary packages available in Visual MODFLOW, pro 4.1. The river — aquifer interaction was simulated using the river boundary package. Simulated pumping rates of 500 m³/day, 1000 m³/day and 1500 m³/day were used in the pumping well package.The zone budget for the steady state condition of study area indicated that the total annual direct recharge is 416.10 MCM and the total annual groundwater draft through pumping is of the order of 416.63 MCM. Two scenarios were considered to predict aquifer system response under different conditions. Sensitivity analysis on model parameters was conducted to quantitatively evaluate the impact of varying model inputs. Based on the results obtained from the sensitivity analysis, it was found that the model is more sensitive to hydraulic conductivity and recharge parameter. Present study deals with importance of groundwater modelling for planning, design, implementation and management of groundwater resources.     

Groundwater flow modeling of Quaternary aquifer Ras Sudr,Egypt

Recently, Ras Sudr (the delta of Wadi Sudr) area received a great amount of attention due to different development expansion activities directed towards this area. Although Quaternary aquifer is the most prospective aquifer in Ras Sudr area, it has not yet completely evaluated. The present work deals with the simulation of the Quaternary groundwater system using a three-dimensional groundwater flow model. MODFLOW code was applied for designing the model of the Ras Sudr area. This is to recognize the groundwater potential as well as exploitation plan of the most prospective aquifer in the area. The objectives were to determine the hydraulic parameters of the Quaternary aquifer, to estimate the recharge amount to the aquifer, and to determine the hydrochemistry of groundwater in the aquifer. During this work, available data has been collected and some field investigation has been carried out. Groundwater flow model has been simulated using pilot points’ method. SEAWAT has been also applied to simulate the variable-density flow and sea water intrusion from the west. It can be concluded that: (1) the direction of groundwater flow is from the east to the west, (2) the aquifer system attains a small range of log-transformed hydraulic conductivity. It ranges between 3.05 and 3.35 m/day, (3) groundwater would be exploited by about 6.4 × 10⁶ m³/year, (4) the estimated recharge accounts for 3 × 10⁶ m³/year, (5) an estimated subsurface flow from the east accounts for 2.7 × 10⁶ m³/year, (6) the increase of total dissolved solids (TDS) most likely due to dilution of salts along the movement way of groundwater from recharge area to discharge area in addition to a contribution of sea water intrusion from the west. Moreover, it is worth to note that a part of TDS increase might be through up coning from underlying more saline Miocene sediments. It is recommended that: (1) any plan for increasing groundwater abstraction is unaffordable, (2) reliable estimates of groundwater abstraction should be done and (3) automatic well control system should be made.     

A regional-scale groundwater flow model for the Leon-Chinandega aquifer,Nicaragua

Groundwater flow in the Leon-Chinandega aquifer was simulated using transient and steady-state numerical models. This unconfined aquifer is located in an agricultural plain in northwest Nicaragua. Previous studies were restricted to determining groundwater availability for irrigation, overlooking the impacts of groundwater development. A sub-basin was selected to study the groundwater flow system and the effects of groundwater development using a numerical groundwater flow model (Visual MODFLOW). Hydrological parameters obtained from pumping tests were related to each hydrostratigraphic unit to assign the distribution of parameter values within each model layer. River discharge measurements were crucial for constraining recharge estimates and reducing the non-uniqueness of the model calibration. Steady-state models have limited usefulness because of the major variation of recharge and agricultural pumping during the wet and dry seasons. Model results indicate that pumping induces a decrease in base flow, depleting river discharge. This becomes critical during dry periods, when irrigation is highest. Transient modeling indicates that the response time of the aquifer is about one hydrologic year, which allows the development of management strategies within short time horizons. Considering further development of irrigated agriculture in the area, the numerical model can be a powerful tool for water resources management.     

Evaluation of the water resources potential at Dahaban region, western Saudi Arabia

Shallow renewable groundwater sources have been used to satisfy the domestic needs and the irrigation in many parts of Saudi Arabia. Increased demand for water resulting from accelerated development activities has placed excess stress on the renewable sources especially in coastal aquifers of the western region of Saudi Arabia. It is expected that the current and future development activities will increase the rate of groundwater mining of the coastal aquifer near the major city Jeddah and surrounding communities unless management measures are implemented. The current groundwater development of Dahaban coastal aquifer located at alluvial fan at the confluence of three major Wadis is depleting the shallow renewable groundwater sources and causes deterioration of its quality. Numerical models are known tools to evaluate groundwater management scenarios under a variety of development options under different hydrogeological regimes. In this study, two models are applied—the MODFLOW for evaluating the hydrodynamic behaviors of the aquifer and MT3D salinity distribution to the costal aquifer near Dahaban town. The models’ simulation evaluates two development scenarios—the impact of excessive abstraction and the water salinity variation keeping abstraction at its current or increases in levels with or without groundwater recharge taking place. The simulation evaluated two scenarios covering a 25-year period—keeping the current abstraction at its current and the other scenario is increasing the well abstraction by 50% for dry condition (no recharge) and wet condition (with recharge). The analysis reveals that, under the first scenario, the continuation of the current pumping rates will result in depletion of the aquifer resulting in drying of many wells and quality deterioration at the level of 2,500 ppm. The results are associated with the corresponding salinity distribution in the region. Simulation of salinity in the region is a density-independent problem as salt concentration does not exceed 2,000 ppm, which is little value compared with sea salinity that amounts to 40,000 ppm. It is not recommended to increase the pumping rate than the current values. However, for the purpose of increasing water resources in the region, it is recommended to install new wells in virgin zones west of Dahaban main road. Maps of high/low potential groundwater and maps of salinity zones (more or less than 1,000 ppm) are provided and could be used to identify zones of high groundwater potential for the four studied scenarios. The implemented numerical simulation of Dahaban aquifer was undertaken to assess the water resources potential in order to reduce the depletion of sources in the future.     

Hydrogeology and sustainable future groundwater abstraction from the Agua Verde aquifer in the Atacama Desert,northern Chile

The hyper-arid conditions prevailing in Agua Verde aquifer in northern Chile make this system the most important water source for nearby towns and mining industries. Due to the growing demand for water in this region, recharge is investigated along with the impact of intense pumping activity in this aquifer. A conceptual model of the hydrogeological system is developed and implemented into a two-dimensional groundwater-flow numerical model. To assess the impact of climate change and groundwater extraction, several scenarios are simulated considering variations in both aquifer recharge and withdrawals. The estimated average groundwater lateral recharge from Precordillera (pre-mountain range) is about 4,482 m³/day. The scenarios that consider an increase of water withdrawal show a non-sustainable groundwater consumption leading to an over-exploitation of the resource, because the outflows surpasses inflows, causing storage depletion. The greater the depletion, the larger the impact of recharge reduction caused by the considered future climate change. This result indicates that the combined effects of such factors may have a severe impact on groundwater availability as found in other groundwater-dependent regions located in arid environments. Furthermore, the scenarios that consider a reduction of the extraction flow rate show that it may be possible to partially alleviate the damage already caused to the aquifer by the continuous extractions since 1974, and it can partially counteract climate change impacts on future groundwater availability caused by a decrease in precipitation (and so in recharge), if the desalination plant in Taltal increases its capacity.     

Using tracer tests and hydrological observations to evaluate effects of tunnel drainage on groundwater and surface waters in the Northern Apennines (Italy)

The impact of a railway tunnel on groundwater and surface waters in the Northern Apennines (Italy) was demonstrated and characterised by multi-tracer tests and hydrological observations. The 15-km-long Firenzuola tunnel crosses turbidite marls and sandstones previously not considered as aquifers. During the drilling, water inrushes occurred at fracture zones, and the tunnel still continues to drain the aquifer. The water table dropped below the level of the valleys, and gaining streams transformed into losing streams or ran completely dry, as did many springs, causing severe damage to the aquatic fauna and other elements of the ecosystem. Two multi-tracer tests, each using uranine and sulforhodamine G, were carried out in two impacted catchments in order to confirm and quantify the stream–aquifer–tunnel interrelations. The results proved connection between losing streams and numerous water inlets in the tunnel, with maximum linear distances of 1.4 km and velocities up to 135 m/d. Several of the demonstrated flowpaths pass under previous groundwater divides (mountain ridges), proving that the tunnel has completely modified the regional flow system. Water balance estimations demonstrate that the observed water losses cannot be explained by climate change but can largely be attributed to the tunnel drainage.     

国道213线五指山隧址区水文地球化学特征研究

运用水文地球化学方法对国道213线五指山隧道进行研究。涌水起源和地下水循环特征等方面的研究。结果表明:国道213线五指山隧道涌水属于深循环地下水,进口段隧道涌水主要来自于砂页岩含水层,而隧道出口段涌水化学组成则受控于石膏矿物的溶解;硫、氧同位素组成分析证实五指山隧道主要涌水带均与浅表地下水的直接下渗有关。此研究成果为隧道涌突水的预防和治理提供了理论依据。