Bragg reflection of water waves by multiple submerged semi-circular breakwaters

This study examines the Bragg reflection of water waves by multiple submerged semi-circular breakwaters. The multipole expansions combined with the shift of polar coordinates are used to develop full linear potential solutions of the problem. In the full solutions, the obliquely and normally incident waves are independently considered. Experimental tests are carried out to measure the reflection and transmission coefficients of the breakwaters at different wave periods and body spacings. The analytical results are in reasonable agreement with the experimental data. The peak reflection coefficient of multiple submerged semi-circular breakwaters and the bandwidth of Bragg reflection are carefully examined by numerical examples. Some significant results for practical application are discussed.     

Wave Reflection Coefficient Spectrum

1 .IntroductionWavereflectionfromstructuresisanimportantfactorforthedesignofthestructures .Therehavebeenmanyresearchesonwavereflectionwithregularwavesandmonochromaticirregularwaves .Miche( 1 951 )proposedanon dimensionalMichenumberMfornormallyincidentirregularwavesconsideringwavebreakingbecauseofthedeepeningofwavesteepnessontheslopeofbreakwaters .ThereflectioncoefficientisproportionaltoM ,i.e .,Kr ∝M =4g( 2π) 5/ 2tan5/ 2 α(Hsf2p) ( 1 )wheregisthegravitationalacceleration ,Hsthesignifican…     

Experimental study of strong reflection of regular water waves over submerged breakwaters in tandem

A series of laboratory experiments was carried out to investigate the strong reflection of regular water waves over a train of submerged breakwaters. Rectangular and trapezoidal shapes of submerged breakwaters are employed and compared for reflecting capability of incident waves. Measured reflection coefficients of regular waves over impermeable submerged breakwaters are verified by comparing with those of the eigenfunction expansion method. A very good agreement is observed. Reflection coefficients of permeable submerged breakwaters are less than those of impermeable breakwaters. The trapezoidal shape is recommended for a submerged breakwater in terms of reflecting capability and practical application.     

港域波浪数学模型的改进与验证

通过物理模型对改进的港内波浪传播变形数学模型进行验证。该数学模型以推广的时变缓坡方程为控制方程,采用含松弛因子的ADI法求解,并对波浪反射和透射边界模拟方法进行改进。先通过物理模型试验确定斜向浪入射条件下抛石防波堤前的波浪反射系数,作为数学模型中部分反射边界模拟的依据。然后进行了一个典型港口内波浪折射、绕射和反射的模型试验,测量港内波浪分布。对比模型试验和数学模型计算的结果表明,数学模型可较好地模拟港内复杂地形和边界条件下规则波和不规则波的传播变形。     

Investigation of Π-type breakwaters performance under regular and irregular waves

In this paper, performance of solid and perforated Π-type breakwaters was investigated experimentally. Both regular and irregular waves were used during testing. Four depths of immersions were selected for each breakwater and wave type. Different wave groups were generated over these breakwaters, and the transmission, reflection and energy-dissipation characteristics were determined. The results of the experimental study were evaluated and some empirical expressions based on the results were suggested to define the transmission, reflection and energy-dissipation coefficients for different immersion depths of solid and perforated breakwaters under regular and irregular waves. Moreover, performance of solid and perforated Π-type breakwaters were compared with that of solid and perforated U-type breakwaters investigated by Günaydın and Kabdaşlı [2006. Performance of solid and perforated U-type breakwaters under regular and irregular waves. Ocean Engineering 31, 1377–1405]. These comparisons showed that the most reasonable model and wave type are selected to determine requiring performance parameters.     

Verification of A Numerical Harbour Wave Model

A numerical model for wave propagation in a harbour is verified by use of physical models.The extended time-dependent mild slope equation is employed as the governing equation,and the model is solved by use of ADI method containing the relaxation factor.Firstly,the reflection coefficient of waves in front of rubble-mound breakwaters under oblique incident waves is determined through physical model tests,and it is regarded as the basis for simulating partial reflection boundaries of the numerical model.Then model tests on refraction,diffraction and reflection of waves in a harbour are performed to measure wave height distribution.Comparative results between physical and numerical model tests show that the present numerical model can satisfactorily simulate the propagation of regular and irregular waves in a harbour with complex topography and boundary conditions.     

基于类海啸波型的岛礁水动力特性数值模拟研究

基于非静压单相流模型NHWAVE建立了高精度二维数值波浪水槽,采用日本2011年实测真实海啸波型系统研究了海啸波在岛礁上传播变形的规律,并且分析了波高、礁坪淹没水深和礁前斜坡坡度等因素对孤立波和真实海啸传播变形的影响。结果表明,相比孤立波,类海啸波的波长明显大于孤立波波长,在测点处引起的水面变化持续时间更长,同等波高情况下真实海啸波型比孤立波能够携带更多的能量,与岛礁的相互作用也更为复杂,在礁坪上形成的淹没水深约为孤立波的两倍。礁前斜坡坡度和礁坪淹没水深均对类海啸波的反射和透射系数有显著影响。随着礁前斜坡坡度的增加,反射系数和透射系数均逐渐增加。随着礁坪淹没水深的增加,反射系数逐渐减小,而透射系数逐渐增大。但是,反射系数和透射系数均随着入射波高的增加而逐渐减小。     

Interaction Between Waves and A Comb-Type Breakwater

The characteristics of wave transmission, reflection and energy dissipation of comb-type caisson breakwaters are studied through laboratory physical model tests. Regular and irregular waves, with a wide range of wave heights and periods and a constant water depth, are considered. Different dimensions of each portion of the comb-type caisson breakwater are tested. Empirical formulae for calculating the reduction coefficient k, which is the ratio of horizontal wave force on unit length of the comb-type breakwater to that on unit length of the vertical wall breakwater, and for calculating the reflection coefficient of waves k, are obtained from the measurements. The comb-type caisson breakwater has been found to be very efficient in dissipating incident wave energy and in reducing wave reflection, and has already been used for the construction of an island breakwater in the Dayao Bay of Dalian Port, Liaoning Province, China. Compared with the cost of a common caisson breakwater, about 24. 5% of the investm     

RANS modelling applied to random wave interaction with submerged permeable structures

This paper is the second part of the work presented by Garcia et al. [Garcia, N., Lara, J.L., Losada, I.J., 2004. 2-D numerical analysis of near-field flow at low-crested breakwaters. Coastal Engineering 51 (10), 991–1020]. In the mentioned paper, flow conditions at low-crested rubble-mound breakwaters under regular wave attack were examined, using a combination of measured data of free surface, bottom pressure and fluid velocities from small-scale experiments and numerical results provided by a VOF-type model (COBRAS) based on the Reynolds-Averaged Navier–Stokes (RANS) equations. This paper demonstrates the capability of the COBRAS model to reproduce irregular wave interaction with submerged permeable breakwaters. Data provided by the numerical model are compared to experimental data of laboratory tests, and the main processes of wave–structure interaction are examined using both experimental and numerical results. The numerical model validation is carried out in two steps. First, the procedure of irregular wave generation is verified to work properly, comparing experimental and numerical data of different cases of irregular wave trains propagating over a flat bottom. Next, the validation of the numerical model for wave interaction with submerged rubble-mound breakwaters is performed through the simulation of small-scale laboratory tests on different incident wave spectra. Results show that the numerical model adequately reproduces the main aspects of the interaction of random waves with submerged porous breakwaters, especially the spectral energy decay at the structure and the spectrum broadening past the structure. The simulations give good results in terms of height envelopes, mean level, spectral shape, root-mean-square height for both free surface displacement and dynamic pressure inside the breakwater. Moreover, large-scale simulations have been conducted, on both regular and irregular incident wave conditions. The overall pattern of the wave interaction with a large-scale submerged breakwater is adequately reproduced by the numerical model. The processes of wave reflection, shoaling and breaking are correctly captured. The good results achieved at a near prototype scale are promising regarding the use of the numerical model for design purposes.     

Scaled Boundary Finite Element Analysis of Wave Passing A Submerged Breakwater

The scaled boundary finite element method （SBFEM） is a novel semi-analytical technique combining the advantage of the finite element method （FEM） and the boundary element method （BEM） with its unique properties. In this paper, the SBFEM is used for computing wave passing submerged breakwaters, and the reflection coeffcient and transmission coefficient are given for the case of wave passing by a rectangular submerged breakwater, a rigid submerged barrier breakwater and a trapezium submerged breakwater in a constant water depth. The results are compared with the analytical solution and experimental results. Good agreement is obtained. Through comparison with the results using the dual boundary element method （DBEM）, it is found that the SBFEM can obtain higher accuracy with fewer elements. Many submerged breakwaters with different dimensions are computed by the SBFEM, and the changing character of the reflection coeffcient and the transmission coefficient are given in the current study.     

Performance of hemi-cylindrical and rectangular submerged breakwaters

A parametric experimental study is conducted to compare the reflection and transmission characteristics of submerged hemi-cylindrical and rectangular rigid and water-filled flexible breakwater models. The results show that, for the rigid breakwaters, rectangular models are more effective than hemi-cylindrical ones in terms of reduction of transmitted waves. As for the flexible breakwaters, the hemi-cylindrical models may give better wave reflection than rectangular ones. However, the energy loss induced by the rectangular breakwaters is much larger and more significant to result in an overall better efficiency in terms of reduction in wave transmission. The effects of internal pressure show that the lowest pressurized flexible models considered in this work are the most effective in the reduction of the transmitted wave height. Higher wave reflection, lower wave transmission and higher energy loss are obtained consistently at the lower submergence depth ratio.     

防浪建筑物影响下珊瑚礁海岸波浪传播变形试验

通过测试一系列不规则波工况研究了防浪建筑物存在下珊瑚礁海岸附近短波、低频长波和增水的变化规律，并对比了防浪建筑物的不同位置情况。分析结果表明：波浪在沿礁传播过程中，短波波高沿礁坪持续衰减，低频长波波高沿礁坪逐渐增大，波浪增水则沿礁坪基本保持不变；海岸附近短波随着防浪建筑物与礁缘距离的变大而减小，低频长波则在防浪建筑物处于礁坪后部时达到最大，防浪建筑物位置的变化对于礁坪波浪增水的影响可以忽略。通过理论分析证明了珊瑚礁地形上低频长波是由于群波破碎造成的破碎点移动而产生的；当特定波况作用于特定位置的防浪建筑物时，低频长波在礁坪上会发生一阶共振效应导致其能量在海岸附近达到最大值。     

Application of desingularized approach to water wave propagation over three-dimensional topography

A numerical approach based on desingularized boundary element method and mixed Eulerian–Lagrangian formulation [Zhang et al., 2006. Wave propagation in a fully nonlinear numerical wave tank: a desingularized method. Ocean Engineering 33, 2310–2331] is extended to solve the water wave propagation over arbitrary topography in a three-dimensional wave tank. A robust damping layer applicable for regular and irregular incident waves is employed to minimize the outgoing wave reflection back into the wave tank. Numerical results on the propagation of regular and irregular incident waves over the flat bottom and linear incident waves over an elliptical shoal show good concurrence with the corresponding analytical solutions and experimental data.     

Long wave reflection from submerged trapezoidal breakwaters

This study addresses the reflection and transmission of long waves from a trapezoidal breakwater and a series of trapezoidal breakwaters, using the matching method. A systematic shape transfer is derived to determine wave reflection and transmission. The peak Bragg reflection of long waves from a series of trapezoidal breakwaters is shifted toward low frequency. In spite of the spacing between any pair of breakwaters, the top plane width and the arrangement of the series of breakwaters are found to be the two major parameters in designing multiply composite Bragg breakwaters.     

Reflection of Oblique Incident Waves by Breakwaters with Partially-Perforated Wall

The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity poten-tials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed.     

半圆型防波堤的水力特性研究

采用不规则波浪试验,研究了半圆型防波堤的水力特性及堤上波力随各主要影响因素的变化规律。指出必须分别按出水堤或淹没堤计算堤上的波力,前者可用改进的合田公式;对于淹没堤,文中建议了计算波力的方法。     

Experimental Research on Wave Transmission over Submerged Rubble Mound Breakwaters

This paper discusses some previous, and presents some new experimental results on wave transmission over submerged breakwaters. The objective of this study is to evaluate wave transmission coefficient and develop a two-dimensional （2D） model as an improvement to the existing wave transmission coefficient models. Factors which affect wave transmission over stbmerged breakwaters are discussed through a series of laboratory experiments. Basic recommendations for evaluation and design of submerged rubble-monud breakwaters are presented. From the test results, a calculation formula of wave transmission coefficient is proposed.     

Numerical Wave Flume Study on Wave Motion Around Submerged Plates

1 .IntroductionApile supportedplatesubmergedatacertaindepthunderseasurfacewasdevelopedasanewtypeofunderwaterbreakwaterfortheprotectionofcoastlinesandharbors .Thisisbecauseitdoesnothinderthewaterexchangebetweentheopenseaandtheprotectedareanordoesithindertheviewovertheopensea .Besides,itislessdependentonthegeotechnicalconditionsoftheseabottomwherethestructureistobeinstalled ;however,itscostishigh ,particularlyinrelativelydeepwaters .Formanyapplicationsitispossibletoreducethewavemotionintheprotec…     

Performance of solid and perforated U-type breakwaters under regular and irregular waves

An experimental investigation of U-type breakwaters was carried out in a laboratory channel. Both regular and irregular waves were used during testing. Two types of breakwaters such as solid and perforated were studied to analyse the porosity effect of structures. In order to investigate performance of these breakwaters for different immersion depths, four depths of immersions of the solid and perforated breakwaters were selected. Different wave groups were generated over these breakwaters, and the transmission, reflection and energy dissipation characteristics of each breakwater were determined. Three coefficients such as transmission, reflection and energy dissipation coefficients, which were named as C_t, C_r, and C_l, respectively, were used during the evaluation of the test results. The most important parameters governing performance of these breakwaters were determined by using earlier investigations and experimental results. These parameters were expressed as a dimensionless group by using π theory. Based on the test results, empirical expressions were formulated to describe the C_t, C_r, and C_l for different immersion depths of solid and perforated breakwaters under regular and irregular waves.