Dynamic Analysis of a Single-Column Platform

In this paper, a single-column structure used as well-head platform is studied. The loads of wave and current exerted on the single-column will be greatly reduced, therefore the cost of the structure will be decreased. The advantages of the single-column structure compared with ordinary jacket structure are explained. A dynamic analysis of this type of structure is made and some problems related to dynamic analysis are solved. In order to check the reliability of computation theory and programme, model tests have been carried out. However, as space is limited, the conclusion of tests will be introduced in another paper. Therefore, this type of structure is applicable for proctical engineering.     

立柱直径比对四立柱平台涡激运动性能影响的数值研究

与单立柱平台(Spar)类似,四立柱平台在洋流作用下也容易发生涡激运动,对锚泊和立管系统的疲劳寿命产生不利影响。一种非对称半潜式平台具有两种不同尺寸的立柱,立柱直径比对非对称平台涡激运动性能的影响尚需深入研究。采用计算流体力学(CFD)方法,对直径比分别为1.0、1.5和2.0的立柱组合在两种不同角度水流作用下的运动响应进行了二维数值模拟,分析发现:立柱直径比不为1时四立柱平台也具有明显的涡激运动,其横荡运动具有显著的锁定现象;在广义折合速度定义下,与相同直径的四立柱平台相比,立柱直径比不为1时其横荡运动锁定区间变宽且滞后,横荡响应幅值的峰值具有明显差异;在所研究的直径比范围内,大直径立柱在上游时涡激运动响应比其在下游时更显著,且这种差异随着直径比变大而变大。     

海岸带钻孔数据的可视化

采用组件式GIS软件MapObiects和面向对象编程工具Visual Basic对海岸带钻孔数据的可视化技术进行了分析和研究。对此，参照国家标准建立了相关图式库，实现了矢量钻孔图层显示与查询、单钻孔柱状剖面图和多钻孔剖面对比分析图的自动绘制等功能，并对其对比分析的算法作了讨论。结果表明该技术可以有效地实现海岸带钻孔数据的分析及可视化工作。     

采油平台淘空防护措施的试验研究

通过室内试验,研究了采油平台的冲淘机理和防护措施,对仿生海底、仿生林、抛石块、抛石子袋等防冲淘措施进行了方案设计和试验,完成了导管架式、桶形基础式、沉垫式3种采油平台的冲淘及防护措施试验研究,提出和完善了多层次抛石防护技术,并将研究成果成功应用于海上防护工程.提出的研究思路以及得到的研究成果,对解决胜利油田海区粉土地基的防冲淘难题具有重要指导意义.     

海洋地理信息产品远程保障模式研究

探讨如何改变传统的保障方式,建立新的海洋地理信息产品的远程保障模式。从有线网络技术、无线3G技术和卫星通信技术三个方面论述了新的远程保障模式运行框架,提出了建立新的保障模式技术路线。远程传输测试表明,三种形式的远程保障可行、高效、实用,可以进一步研制开发相应的软硬件实体平台。     

Sensitivity Analysis of Air Gap Motion with Respect to Wind Load and Mooring System for Semi-Submersible Platform Design

A design of semi-submersible platform is mainly based on the extreme response analysis due to the forces experienced by the components during lifetime. The external loads can induce the extreme air gap response and potential deck impact to the semi-submersible platform. It is important to predict air gap response of platforms accurately in order to check the strength of local structures which withstand the wave slamming due to negative air gap. The wind load cannot be simulated easily by model test in towing tank whereas it can be simulated accurately in wind tunnel test. Furthermore, full scale simulation of the mooring system in model test is still a tuff work especially the stiffness of the mooring system. Owing to the above mentioned problem, the model test results are not accurate enough for air gap evaluation. The aim of this paper is to present sensitivity analysis results of air gap motion with respect to the mooring system and wind load for the design of semi-submersible platform. Though the model test results are not suitable for the direct evaluation of air gap, they can be used as a good basis for tuning the radiation damping and viscous drag in numerical simulation. In the presented design example, a numerical model is tuned and validated by ANSYS AQWA based on the model test results with a simple 4 line symmetrical horizontal soft mooring system. According to the tuned numerical model, sensitivity analysis studies of air gap motion with respect to the mooring system and wind load are performed in time domain. Three mooring systems and five simulation cases about the presented platform are simulated based on the results of wind tunnel tests and sea-keeping tests. The sensitivity analysis results are valuable for the floating platform design.     

海浪方向谱的现场观测与分析

方向谱是海浪的基本性质之一。本文在国内首次采用测波仪阵列法在渤海采油平台上成功地观测到海浪方向谱，给出了当地随波浪成长而变化的方向谱表达式。观测前采用数模和模型试验方法，对阵列的布置型式、测波仪间距和平台等对观测结果的影响，以及现有各种方向谱分析方法的精度等进行了对比分析，为提高观测精度，保证方向谱分析的质量提供了依据。     

Impact Analysis of Air Gap Motion with Respect to Parameters of Mooring System for Floating Platform

In this paper, the impact analysis of air gap concerning the parameters of mooring system for the semi-submersible platform is conducted. It is challenging to simulate the wave, current and wind loads of a platform based on a model test simultaneously. Furthermore, the dynamic equivalence between the truncated and full-depth mooring system is still a tuff work. However, the wind and current loads can be tested accurately in wind tunnel model. Furthermore, the wave can be simulated accurately in wave tank test. The full-scale mooring system and the all environment loads can be simulated accurately by using the numerical model based on the model tests simultaneously. In this paper, the air gap response of a floating platform is calculated based on the results of tunnel test and wave tank. Meanwhile, full-scale mooring system, the wind, wave and current load can be considered simultaneously. In addition, a numerical model of the platform is tuned and validated by ANSYS AQWA according to the model test results. With the support of the tuned numerical model, seventeen simulation cases about the presented platform are considered to study the wave, wind, and current loads simultaneously. Then, the impact analysis studies of air gap motion regarding the length, elasticity, and type of the mooring line are performed in the time domain under the beam wave, head wave, and oblique wave conditions.     

Observations and Estimations of Directional Spectrum of Sea Waves

The directional spectrum is one of the basic characteristics of sea waves. The observations of directional spectrum of sea waves were successfully conducted at platform Bohai 8 during 1991 and 1992 using a wave gage array for the first time in China. Based on the field data, the directional spectrum which depends on the wave growth is given in this paper. Before observations, the effects of the type of gage array, the distance between the gages and the platform itself on the measured results and the precision of some methods for estimating the directional spectrum were investigated and compared with the methods of numerical simulations and model tests of multi-direcitonal irregular waves. This ensures the quality of the observations and estimations of the directional spectrum.     

An Engineering Computational Method of Calculating Wave Forces on the Mat and Platform''''s Sit-on-Bottom Stability

- In this paper, an engineering method is employed to calculate the horizontal and vertical wave forces on the mat of the submersible platform under Froude-Krylov hypothesis. According to some model tests, appropriate diffraction coefficients are selected. And the results of the formulae given in the paper agree satisfactorily with those experimental data now available. The proposed computational method is effective and convenient to use in evaluating the horizontal and vertical wave forces on the mat. An exmaple is also given in this paper. Finally, the effects of the vertical wave force on the platorm's sit-on-bottom stability are analyzed.     

台湾海峡中、北部浮游有孔虫同海流和沉积环境的关系

于1987年7月和8月及1988年5月和7月，在台湾海峡中、北部海域，利用浮游生物网和蚌式采泥器分别采集了水层中的浮游有孔虫标本和表层沉积里的浮游有孔虫遗壳样品。对活体和遗壳在数量和组成方面对比分析研究表明，调查海区暖水性最强的水域位于东南角的A5站一带，海峡暖流水由此向北延伸，在海坛岛以东D1站附近，因与闽浙沿岸水交汇而减弱。遗壳高值区位于深水的盆地，活体则出现在台地上，两者分布不一致。其原因在于盆地受冲刷，沉积作用缓慢，遗壳被浓缩；台地沉积速率高，遗壳数量被稀释。     

斜坡堤胸墙波压力的试验与分析

通过断面物理模型试验,获得了斜坡堤堤顶胸墙在肩宽B不同工况组合下,承受水平波浪力、底部浮托力的大量数据。对这些数据进行了分析,得出了斜坡堤堤顶胸墙波压力随肩宽B的变化规律。     

A Finite Element Method for Cracked Components of Structures

1 .IntroductionOffshoreplatformsarelargescalesteelorconcretestructures.Theyexperiencevariouskindsofdamagessuchasdents ,corrosionpits ,cracks ,deformation ,etc .,afteryearsofenvironmentalimpactofwinds ,waves ,currents ,soilreactions ,earthquakesandice (DuanandLiu ,1 995) .Thesafetyofthestructureshasalwaysbeenthemostimportantissueconcerned ,anditdependsontheassessmentoftheintegrityofthestructures,orspecificallyontheassessmentofthedamagesinthestructures .Riclesetal.( 1 994)experimentallyinvestig…     

Strength Analysis on Brace Structure for Semi-Submersible in Consideration of Wave Slamming

Slamming on bracings of column stabilized units shall be considered as a possible limiting criterion under transit condition based on the requirements in DNV-OS-C103. However, the wave slamming loads under survival condition were ignored for the strength analysis of the brace structures in many semi-submersible projects. In this paper, a method of strength analysis of brace structure is proposed based on the reconstruction and extrapolation of numerical model. The full-scale mooring system, the wind, wave and current loads can be considered simultaneously. Firstly, the model tests of the semi-submersible platform in wind tunnel and wave tanker have been carried out. Secondly, the numerical models of the platform are reconstructed and extrapolated based on the results of model tests. Then, a nonlinear numerical analysis has been conducted to study the wave slamming load on brace in semi-submersible platform through the reconstructed and extrapolated numerical model. For the randomness of wave load, ten subcases under each condition have been carried out. The value of the 90% Gumble distribution values of the ten subcases are used. Finally, the strength on brace structure has been analyzed considering the wave slamming. The wave slamming loads have been compared between the survival condition and transit condition with the method. The results indicate that wave slamming under survival condition is more critical than that under transit condition. Meanwhile, the wave slamming is significant to the structural strength of the brace. It should be overall considered in the strength analysis of the brace structure.     

海洋平台隔水套管群桩性状的研究

海洋平台的隔水套管群桩与土共同作用研究是一个很复杂的课题,目前国内外研究资料甚少,因此在平台导管架设计中,一般不考虑隔水套管群桩承受水平力作用,这与实际不相符合。本文结合工程课题,在调查研究和模型试验的基础上,对隔水套管群桩在水平力作用下的工作性状与破坏机理、群桩的水平力及其主要影响因素、单桩与群桩情况下应力应变关系等方面进行较深入的研究;并提出砂土地基隔水套管群桩效应经验公式,弥补了现行计算方法的缺陷和不足。研究成果可供工程设计参考使用。     

On the Vibration Reduction Effect of Offshore Platform Vibration Distribution Structure

Based on the Bohai ocean environment characteristics, a new platform vibration distribution structure is designed to reduce the platform vibration due to flowing ice. The effect of the earthquake wave and ocean wave load on this vibration distribution structure is considered in the design. The principal idea of this new vibration distribution structure is dividing the platform main column into the inner tube and the outer tube. The outer tube is connected with the leg pontoon by braces, while the inner tube is used to support the platform deck. The inner tube and outer tube can be connected or disconneted in the region near the water line. For evaluating the vibration reduction effect of such a structure, tests are carried out on a steel model, and the external load of flowing ice, earthquake wave and ocean wave are simulated by concentated random load applied to different points of the model. The tests are performed in water media and air media respectively. The vibration reduction effect is evaluated     

The Barny Sentinel trawl-resistant ADCP bottom mount: design,testing, and application

A trawl-resistant bottom mount (TRBM) has been developed to meet the needs of long-term deployment of Acoustic Doppler Current Profilers (ADCPs) and Wave-Tide Gauges in water depths up to 300 m. This paper describes the unit's construction and operation together with practical lessons learned during development, testing, and use that can be applied to comparable platforms. The Barny Sentinel is derived from a larger version developed several years ago at SACLANT Center, now extensively redesigned to incorporate an RDI Sentinel ADCP and a Sea-Bird Wave-Tide Gauge. A concrete ring surrounding the fiberglass instrument housing serves as ballast and impact protection. Two independent recovery modes may be activated by acoustic commands, one of which can operate whether or not the platform is upright. Features have also been included to facilitate recovery by remotely operated underwater vehicle. A sending unit, temporarily attached during launch, provides real time information on platform depth and tilt, and confirms that the platform is properly positioned on the bottom before a launch commitment is made. A series of tests and applications have validated all basic functions and trawl resistance. Platform cost has been kept below that of the on-board instruments, while still maintaining the required high level of recoverability     

Low-frequency damping of a moored semisubmersible obtained from simulated extinction tests and mean wave drift forces

Low-frequency damping of a moored semisubmersible drilling platform was obtained from numerical extinction tests simulated in still water and in regular waves and from mean wave drift forces calculated at zero forward speed. The influence of drag forces was represented by the modified Morison equation. The platform as used for the 18th ITTC Comparative Mooring Study was analyzed in irregular beam waves. The computed time series of sway as well as the corresponding sway response spectrum compared favourably with model test measurements, demonstrating that this procedure to determine low-frequency damping can be effective.     

Soil parameters used for design of gravity platforms in the North Sea

The foundation soils for most of the North Sea gravity platforms installed so far have been very stiff over-consolidated clays and dense sand. Two actual platform sites are described that are representative of these soil conditions. It is shown how the design soil parameters required for a geotechnical analysis of the platform foundation have been selected for these two sites. The results of in situ testing, laboratory tests and experience from existing platforms are used, with the main emphasis placed on procedures used at the Norwegian Geotechnical Institute.     

Ice-Induced Fatigue Analysis by Spectral Approach for Offshore Jacket Platforms with Ice-Breaking Cones

The spectral methods and ice-induced fatigue analysis are discussed based on Miner's linear cumulative fatigue hypothesis and S-N curve data.According to the long-term data of full-scale tests on the platforms in the Bohai Sea,the ice force spectrum of conical structures and the fatigue environmental model are established.Moreover,the finite element model of JZ20-2MSW platform,an example of ice-induced fatigue analysis,is built with ANSYS software.The mode analysis and dynamic analysis in frequency domain under all kinds of ice fatigue work conditions are carried on,and the fatigue life of the structure is estimated in detail.The methods in this paper can be helpful in ice-induced fatigue analysis of ice-resistant platforms.