东昆仑东段香加南山花岗岩基斜长石成分组成与岩浆演化和混合作用

东昆仑东段香加南山花岗岩基岩浆混合作用明显,斜长石作为主要造岩矿物,是研究岩石成因、示踪岩浆演化和岩浆混合过程的有效工具。对香加南山花岗岩基中寄主岩及暗色微粒包体中的斜长石进行岩相学和矿物化学研究。电子探针结果显示:寄主岩中正常环带斜长石(39~48,21~36)、包体中斜长石捕掳晶(41~49,35~36,43~49,31~47,27~38)和寄主岩矿物中包裹斜长石(29~45,14~32)具有演化的An值;部分寄主岩斜长石核部由于受到后期蚀变具有较高的An值(59~72)。包体中基质斜长石大部分具核边结构,核部(52,31)和边部(33~37,25)An值存在间断;少量斜长石核部受到蚀变,An值较低(49),幔部(55~71)An值高于边部(46~49);部分包体中基质斜长石核部呈补丁状,暗色部分An值较高(66),浅色部分An值较低(33~39)。包体中斜长石捕掳晶主要分为干净斜长石捕掳晶和含有矿物的斜长石捕掳晶两大类,干净斜长石环带明显或聚片双晶发育,An值变化范围较小(41~49,35~36);含有暗色矿物的斜长石捕掳晶An值整体也呈震荡变化(43~49,31~47,27~38),但由于受到蚀变,部分测点An值较高(78),少量斜长石具有高An值增生边(73)。以上研究显示,结晶于寄主岩的斜长石正常演化序列反映寄主岩从演化早期到晚期,岩浆逐渐从偏基性向酸性转变;包体基质斜长石为包体进入寄主岩温度、压力和水饱和度降低导致斜长石受到熔蚀后继续结晶结果;包体中斜长石捕掳晶来自寄主岩,由于进入包体后温度和压力产生变化,以及后期生长,导致斜长石的成分和构造有所不同。香加南山花岗岩基及暗色微粒包体中斜长石的复杂环带为幔源镁铁质岩浆注入长英质岩浆混合作用的结果。     

西藏曲水碰撞花岗岩的混合成因：来自成因矿物学证据

西藏曲水碰撞花岗岩地处冈底斯构造-岩浆带中部,呈东西向平行雅鲁藏布缝合带分布.该岩体以花岗闪长岩、石英闪长岩为主,其次为石英二长闪长岩.岩体内普遍发育微粒镁铁质包体.对花岗闪长岩、石英闪长岩及微粒镁铁质包体的成因矿物学研究结果显示：（1）斜长石发育环带且边缘和核部偏基性,幔部酸性;（2）斜长石斑晶边缘常含有角闪石、黑云母等暗色矿物包体;（3）钾长石X射线结构分析显示自核部向边缘温度呈现逐渐升高的特点;（4）长石矿物中普遍含有较高的Cr、Ni、Co元素,明显不同于壳熔花岗岩;（5）角闪石、黑云母矿物MgO含量高于典型壳熔花岗岩;（6）包体中发育针状磷灰石和角闪石,显示为岩浆淬冷的结果.上述特征不可能用正常岩浆分异作用来解释,而更可能是壳-幔岩浆混合作用的结果.采用矿物温压计所得到的结果也符合混合后的岩浆演化特征.     

内蒙古中部四子王旗大庙岩体时代及成因

华北北缘的内蒙古中部地区出露大量晚古生代-早中生代花岗岩类,在空间上构成一条巨大的东西向花岗岩带.四子王旗大庙岩体作为一个典型的代表,以花岗闪长岩为主,其内部普遍发育暗色微粒包体(MMEs),是认识花岗岩岩石成因和演化的关键.本文对包体及寄主岩进行了同位素测年、岩相学、矿物化学、全岩主量元素和微量元素分析.寄主岩石中的锆石LA-ICPMS U-Pb年龄平均为265±7Ma(2σ),包体中单颗粒黑云母Rb-Sr年龄为253±5Ma(MSWD=0.85),属晚二叠世-早三叠世岩浆活动的产物.包体具塑性外形及岩浆结构,存在多种不平衡矿物组合;MME中的斜长石An组分及黑云母斑晶中MgO成分呈多期震荡,同时总体上均显示出幔部高于核、边部的特征,暗示斑晶可能为围岩捕虏晶,这种相似的成分变化指示包体与寄主岩相互作用引起的结晶环境改变,标志着岩浆成分的变化,是岩浆混合的标志之一;主量和微量数据进一步证明岩体的岩浆混合成因.Rb/Sr-K/Rb变化关系反映包体非结晶分异或黑云母堆晶的产物,而Ce/Pb-Ce、Ba-δEu和P_2O_5-δEu图及其他微量元素比值图等均表明花岗闪长岩体发生了岩浆混合作用,这也得到岩浆物理化学条件的支持.岩浆底侵和岩浆混合作用是该区岩体形成的主要机制和方式.岩石地球化学特征表明该岩体不同于加厚地壳和俯冲洋壳熔融的TTG和埃达克质岩石,而黑云母矿物化学和岩石地球化学显示其构造背景很可能为同碰撞环境.     

川西稻城岩体岩浆混合作用：矿物学特征的证据

义敦岛弧形成于晚三叠世大规模俯冲造山作用过程中,位于松潘甘孜地体和羌塘地体之间。稻城边部岩体是义敦岛弧带内规模巨大的复式花岗质岩体,由花岗岩、花岗闪长岩和钾长花岗岩组成。大量暗色镁铁质微粒包体发育于花岗闪长岩和钾长花岗岩中,且其与寄主岩石的接触界线明显。暗色镁铁质微粒包体具有细粒结构,发育石英眼构造、针状磷灰石和具环带结构的斜长石斑晶。文中以稻城岩体寄主岩石和暗色微粒包体中斜长石、黑云母和角闪石为研究对象,开展岩相学和电子探针原位化学成分分析,厘定了矿物形成的物理化学条件,探讨了岩浆混合作用过程及其形成的构造环境。研究表明：花岗闪长岩和暗色微粒包体中的斜长石主要为中长石,其核部呈浑圆状;前者核部的An值(21~50)显著高于幔部(21~34);后者则发育典型的突变环带,An值(29~44)呈波状变化且相对集中。暗色微粒包体与寄主花岗闪长岩中斜长石的An值部分重叠表明二者形成过程中存在含量的岩浆混合作用。斜长石环带中的An值随Al2O3、FeO、MgO和CaO含量的升高而升高,但随SiO2、Na2O和K2O含量的升高而降低。寄主岩石和暗色微粒包体中角闪石富镁铁,阳离子特征为：CaB=1.56~1.75,Ti=0.08~0.13,属于钙质角闪石,具壳源特征,其结晶温度分别为697~725 ℃和680~705 ℃。花岗闪长岩中黑云母的Mg/(Mg+Fe2+)为0.37~0.45,显示出富Fe贫Ca、Mg,属于典型的岩浆成因黑云母。黑云母TiO2含量变化范围为3.54%~4.62%,Al2O3含量变化范围为13.89%~15.15%;黑云母的氧化系数为0.08~0.11,Mg#为0.39~0.46,MF值为0.36~0.44,单位分子中阳离子数AlⅥ为0.03~0.11,以单位分子中Ti和Al阳离子数计算的黑云母结晶温度为584~624 ℃,表明其结晶温度较高,具壳幔混源特征。稻城岩体是以壳源为主的壳幔混源成因的I型花岗岩,暗色微粒包体是由镁铁质岩浆与长英质岩浆不同程度的混合作用形成的。     

东昆仑东段哈拉尕吐花岗岩基岩浆混合作用:来自岩石学和矿物学约束

哈拉尕吐花岗岩基位于东昆仑东段,其中花岗闪长岩岩浆混合作用明显,是研究岩浆混合作用的良好对象.从岩石学、岩相学和矿物化学等方面对哈拉尕吐花岗岩基进行了详细研究.电子探针结果显示:寄主岩斜长石的An值同相对应包体中斜长石捕掳晶近似;包体中基质斜长石大部分具核边结构,核部和边部An值存在间断;部分包体中浅色基质斜长石的An值与具核边结构斜长石的边部近似;辉长闪长岩中斜长石具较高的An值.寄主岩角闪石同相对应包体中角闪石捕掳晶的结晶温度、压力和氧逸度较为接近;包体中基质角闪石的结晶温度和压力低于寄主岩角闪石,氧逸度稍高于寄主岩角闪石;辉长闪长岩角闪石具有最高的结晶温度和压力及最低的氧逸度.哈图沟剖面和德福胜剖面寄主岩中的斜长石和角闪石的成分具有一定差别.岩浆不同期次侵入结晶和岩浆自身演化,使不同地点斜长石和角闪石的成分和物理化学特征具有一定变化.镁铁质岩浆位于地壳深部,氧逸度较低,使结晶的角闪石具有较高的形成压力和较低的氧逸度,斜长石具较高An值;随着镁铁质岩浆注入寄主岩,由于环境突变,使斜长石受到熔蚀;由于岩浆上侵以及两种岩浆物理化学性质差别较大,导致温度、压力和水饱和度降低,氧逸度升高,使包体中残留岩浆快速结晶,形成具核边结构、浅色均一的斜长石,以及结晶程度较差、较高氧逸度的角闪石.      

东昆仑东段加鲁河中基性岩体环石英捕虏晶角闪石和黑云母矿物学特征及其对岩浆混合过程的约束

加鲁河中基性岩体位于东昆仑造山带东段,岩体边部岩浆混合作用明显,富含暗色环边石英,是研究岩浆混合作用的理想地质体。本文在详细岩石学研究基础上,对寄主岩(香加南山花岗岩基)-包体-包体捕虏晶-暗色环边石英的矿物(黑云母和角闪石)进行电子探针成分分析。研究表明,不同类型黑云母的Fe~(2+)/(Fe~(2+)+Mg)比值基本一致,介于0.53~0.59,寄主岩黑云母的MgO含量较低(8.06%~8.29%),包体捕虏晶-暗色环边的黑云母MgO含量较高(分别为9.38%~9.45%和9.25%~9.52%);不同类型角闪石的(Ca+AlⅣ)较高,大于0.5,寄主岩角闪石具有较高的FeO~T含量(20.27%~21.01%)和较低Mg#值(45~47);包体-包体捕虏晶-暗色环边的角闪石具有较低的FeO~T含量(分别为18.31%~19.49%、18.11%~18.90%和18.01%~18.43%)和较高的Mg#值(分别为50~54、52~53和55~60)。寄主岩的角闪石(为铁浅闪石)和黑云母(为铁质黑云母)具壳型特征;包体-包体捕虏晶-暗色环边的角闪石(为镁角闪石)和包体-暗色环边的黑云母(为镁质黑云母)具壳幔型特征。寄主岩和包体捕虏晶的角闪石具有近似的成分和结晶环境,显示包体与寄主岩间存在成分交换。早期富水岩浆有利于磁铁矿和钛铁矿结晶,使晚期结晶的暗色环边矿物(黑云母和角闪石)具有较高的MgO含量和较低的FeO~T含量,以及最低的结晶温度和压力。     

班公湖-怒江成矿带西段阿翁错地区早白垩世花岗闪长岩的成因及构造背景——来自斜长石和黑云母化学成分的约束

阿翁错地区早白垩世花岗闪长岩位于班公湖-怒江成矿带西段,广泛发育暗色微粒包体,是研究岩浆混合作用的理想对象。本文从地质学、岩相学和矿物化学等方面对花岗闪长岩开展了详细研究。包体形态多样,与寄主岩呈渐变或截然型接触关系,包体与寄主岩之间相互穿插,接触带发育冷凝边,包体从寄主岩中捕获了大量捕虏晶矿物,包体和寄主岩中均见针状磷灰石。电子探针结果显示:具正环带特征的寄主岩斜长石An值变化范围不大,在48.16～59.05之间,具致密韵律环带特征,可能代表镁铁质岩浆注入长英质岩浆房前结晶的斜长石;具反环带特征斜长石的An值变化范围较大,核部An值为29.86,往外An值陡增至51.09,整体呈逐渐增大趋势,暗示存在富钙基性岩浆的加入;具正-反环带特征的寄主岩斜长石核部至中间区域An值变化相对复杂,具稀疏韵律环带结构特征,反映斜长石结晶过程中因岩浆混合作用岩浆房环境发生突变,随着混合作用持续进行,岩浆逐渐冷却,斜长石在静态环境下继续结晶形成干净的正环带边部;包体斜长石虽然存在正环带,但其An值变化范围较大,在28.63～62.40之间,核部An值高,边部An值骤然降低,可能是镁铁质岩浆与长英质岩浆...     

东昆仑东段三叠纪岩浆混合作用:以香加南山花岗岩基为例

香加南山花岗岩基位于东昆仑造山带东段,岩基主要岩石类型为花岗闪长岩。千瓦大桥-加鲁河一带花岗岩体为香加南山岩基的重要组成部分。香加南山花岗岩基含大量暗色微粒包体,包体中捕掳晶丰富。千瓦大桥-加鲁河一带花岗岩体寄主岩中斜长石和暗色微粒包体中捕掳晶斜长石具正常环带,An值震荡变化,角闪石和黑云母Mg O含量和Mg#值较低,具壳源特征;暗色微粒包体中基质斜长石具核边结构,核部和边部An值存在间断,角闪石和黑云母Mg O含量和Mg#值较高,具幔源特征。LA-ICP-MS锆石U-Pb同位素定年结果显示千瓦大桥花岗闪长岩、暗色微粒包体和加鲁河辉长岩的结晶年龄分别为251.0±1.9Ma、252.8±3.0Ma和221.4±3.3Ma。千瓦大桥花岗闪长岩和加鲁河花岗闪长岩富集轻稀土元素(LREE)和大离子亲石元素(LILE),亏损高场强元素(HFSE),具较低的Mg#和Nb/Ta比值;从千瓦大桥到加鲁河花岗闪长岩呈现出由准铝质中钾钙碱性系列向准铝-弱过铝质中钾-高钾钙碱性系列演化;暗色微粒包体和加鲁河辉长岩轻重稀土元素分异程度相对较低,具较高的Mg#和Nb/Ta比值。千瓦大桥花岗闪长岩和加鲁河花岗闪长岩分别为古特提斯演化俯冲阶段和后碰撞阶段幔源岩浆底侵新生地壳使其部分熔融产物。镁铁质岩浆注入长英质岩浆的混合作用形成了暗色微粒包体。岩浆混合过程中,如果岩浆不完全混合,混合岩浆中混入物质除了长英质岩浆的残留岩浆和捕掳晶,还应该有镁铁质岩浆与长英质岩浆之间的元素梯度差导致的物质扩散;如果岩浆为近完全混合,混合岩浆近似为镁铁质岩浆和长英质岩浆以一定比例二元混合。东昆仑东段晚古生代-早中生代幔源岩浆对花岗质岩浆的影响是一个持续的过程,从俯冲阶段早期流体交代地幔熔融,到俯冲阶段后期板片断离,然后同碰撞阶段板片断离的持续影响,再到后碰撞阶段加厚地壳的拆沉作用,由于地球动力学体制不同,导致幔源岩浆影响的大小和特征不同。     

湘南多金属矿集区燕山期成矿花岗岩的造岩矿物特征及其成因意义

湘南地区燕山期成矿花岗岩有3种类型,其主要造岩矿物化学成分和种属明显不同;矿物的化学成分变异特征均显示出壳幔岩浆混合成因的特点：①角闪石均属于钙质角闪石亚类。②MC型早期次花岗岩中的黑云母多属镁质黑云母;CM型晚期次花岗岩中的黑云母主要为铁质黑云母;C型花岗岩中的黑云母主要为铁叶云母-铁黑云母,且多为铁锂黑云母。3类型花岗岩中黑云母的成分变异呈线型关系,暗示有成因联系。③3类型花岗岩中斜长石有明显区别,MC型多为中长石,CM的多为更长石,C型多为钠长石。斜长石环带构造发育程度不同,CM型早期次单元花岗岩中的斜长石环带最发育。④CM型花岗岩及其暗色微粒包体中的碱性长石主要属于相对富钾的正长石,包体中的个别属歪长石,表明其形成温度较高;C型花岗岩中碱性长石为相对贫钾的钠正长石及微斜长石。⑤造岩矿物特征和成分变异显示了成矿花岗岩的形成与壳幔岩浆混合作用有关,形成MC型和CM型早期次单元花岗岩的岩浆演化主要是岩浆混合作用,而CM型花岗岩晚期次的花岗岩类和C型花岗岩类的岩浆演化可能还存在分离结晶作用。     

西藏冈底斯带始新世曲水岩基的岩浆混合作用:来自斜长石阴极发光特征和成分变化的证据

斜长石作为主要造岩矿物,是研究岩石成因、示踪岩浆演化和岩浆混合过程的有效工具.对冈底斯带曲水岩基始新世花岗闪长岩、二长花岗岩、闪长岩脉和暗色包体中的斜长石进行了阴极发光图像结构特征、电子探针主量元素和LA-ICP-MS微量元素成分的分析,揭示了斜长石复杂环带的成因和相关的岩浆过程.该区斜长石的阴极发光图像呈现出多种颜色且与其An值相对应,随着An值降低依次为绿色、蓝色和暗灰色或暗红色等,并发育补丁状环带、筛状环带、韵律环带等.花岗闪长岩、二长花岗岩中斜长石的An值具有相似的变化范围(20~55),而闪长岩脉和暗色包体中An值的变化范围较大(25~85),表明曲水岩基经历了复杂的开放过程.微量元素结果表明:花岗闪长岩与闪长岩脉和暗色微粒包体具有相同的Sr含量范围(600×10^-6~1 100×10^-6);而二长花岗岩的Sr含量(1 000×10^-6~2 400×10^-6)整体高于前者.以上研究表明,花岗闪长岩中阴极发光呈现绿色的核部或幔部是偏中性岩浆注入寄主岩岩浆混合的结果;具有高Sr含量的二长花岗岩认为是高Sr含量的岩浆结晶形成的;闪长岩脉和暗色微粒包体中的筛状结构斜长石为寄主岩捕掳晶.     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。